webinar v 2

If this is your first time using the Illuminate software you will need to install Java.This is a one time installation.

To install visit the link: bit.ly/my-java

Click onGet required software

Click Save

Next, click Save

The Java download begins.Please allow the download process to end by reaching 100%.

3

Finish the installation.

1 2

4

You’ve successfully installed Java.Please continue to part 2- accessing the Webinar.

The link to the virtual class will be emailed to you in advance.The class will be available only during from the morning of the webinar’s scheduled day . Accessing the virtual class prior to the time set will result in this screen:

Access the virtual class in the time that was set!

Before accessing the virtual class you will be asked to enter your name.

The Java software you install will begin to load.This may take a couple of minutes.

12

Click OK and wait for the virtual class to open up.

1

2

You’ve successfully entered the virtual class!Please continue to the next step – Audio tests and settings.

• We recommend performing the audio and recording testsabout 10 minutes prior to the webinar.

• Please prepare a headset with earphones and a microphone.

Please follow these steps:1 2 3

TOOLS AUDIO AUDIO SETUP WIZARD

Click OK

- Click Play-If you hear the recording click Yes-If you do not hear the recording, please adjust the volume on your computer and make sure the headphones are properly connected.

Click OK to test your microphone.

- Click Record and record yourself by speaking to the microphone.- Click Play to listen to the recording.- If you hear your recording click Yes.- If you can’t hear your recording please adjust your microphone by reconnecting it.

You’ve successfully finished the audio and recording tests.Please move on to the next part – orientation.

This is the virtual class. Click Next for explanation.

List of participantsThis is the list of users who are currentlylogged into the virtual class.

Feedback tools

These tools allow you to:1.Raise your hand (for a question or a comment)2.Providing feedback such as clapping, smiling etc.3.Answering Yes/No to the speaker’s questions.

1 2 3

Chat Window

Post chat messages such as questions or comments to all participants.

Using the microphone

This button allows you to speak during the webinar.

Two possible uses:1.Clicking the microphone icon allows you to speak.2.When finished speaking click on the microphone icon again, to not interrupt others.

1

2

The whiteboardIn this area the presenter showsthe presentation and any other information.

We will meet at the Social Media Webinar

Thursday, March 24th at 4pm CET

For question please contact Saritsarita@mapa.ort.org.il

לרשימת הנושאים