uoptutorialstore.com€¦ · web viewcit/274. nyedge1 ios image load test _____ digitally signed...
Post on 17-Mar-2020
13 Views
Preview:
TRANSCRIPT
Final review test lab
Final review test lab
CIT/274
Final review test lab
NYEDGE1 IOS Image Load Test ___________________
Digitally Signed Release Software program load complete, entry point: 0x81000000, size: 0x5e8ba54Self decompressing the image : ########################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################## [OK] Smart Init is disabled. IOMEM set to: 25 Using iomem percentage: 25Configured iomem percentage is not available.Actual iomem percentage used: 21 Restricted Rights Legend Use, duplication, or disclosure by the Government issubject to restrictions as set forth in subparagraph(c) of the Commercial Computer Software - RestrictedRights clause at FAR sec. 52.227-19 and subparagraph(c) (1) (ii) of the Rights in Technical Data and ComputerSoftware clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706
Final review test lab
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M6, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2014 by Cisco Systems, Inc.Compiled Wed 19-Mar-14 19:23 by prod_rel_team This product contains cryptographic features and is subject to UnitedStates and local country laws governing import, export, transfer anduse. Delivery of Cisco cryptographic products does not implythird-party authority to import, export, distribute or use encryption.Importers, exporters, distributors and users are responsible forcompliance with U.S. and local country laws. By using this product youagree to comply with applicable laws and regulations. If you are unableto comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at:http://www.cisco.com/wwl/export/crypto/tool/stqrg.html If you require further assistance please contact us by sending email toexport@cisco.com. Installed image archiveCisco CISCO2911/K9 (revision 1.0) with 409600K/114688K bytes of memory.Processor board ID FCZ1845608V3 Gigabit Ethernet interfaces2 Serial(sync/async) interfaces1 terminal line1 Virtual Private Network (VPN) ModuleDRAM configuration is 64 bits wide with parity enabled.255K bytes of non-volatile configuration memory.255488K bytes of ATA System CompactFlash 0 (Read/Write) --- System Configuration Dialog --- Would you like to enter the initial configuration dialog? [yes/no]: % Please answer 'yes' or 'no'.Would you like to enter the initial configuration dialog? [yes/no]: n
Final review test lab
Press RETURN to get started! *Jan 2 00:00:04.975: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = ipbasek9 and License = ipbasek9*Jan 2 00:00:05.131: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = securityk9 and License = securityk9*Jan 2 00:00:05.311: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = datak9 and License = datak9*Mar 26 10:51:26.247: c3600_scp_set_dstaddr2_idb(184)add = 80 name is Embedded-Service-Engine0/0*Mar 26 10:51:46.511: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized *Mar 26 10:51:46.515: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled *Mar 26 10:51:47.507: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down*Mar 26 10:51:47.507: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up*Mar 26 10:51:47.507: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down*Mar 26 10:51:47.507: %LINK-3-UPDOWN: Interface Serial0/0/0, changed state to down*Mar 26 10:51:47.507: %LINK-3-UPDOWN: Interface Serial0/0/1, changed state to down*Mar 26 10:51:48.615: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down*Mar 26 10:51:48.615: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up*Mar 26 10:51:48.615: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down*Mar 26 10:51:48.615: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to down*Mar 26 10:51:48.615: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to down*Mar 26 10:51:49.479: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration is ignored based on the configuration register setting.
Final review test lab
*Mar 26 10:52:18.071: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down*Mar 26 10:52:19.687: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down*Mar 26 10:52:19.687: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down*Mar 26 10:52:19.687: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down*Mar 26 10:52:19.687: %LINK-5-CHANGED: Interface Serial0/0/0, changed state to administratively down*Mar 26 10:52:19.687: %LINK-5-CHANGED: Interface Serial0/0/1, changed state to administratively down*Mar 26 10:52:20.731: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down*Mar 26 10:52:20.731: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down*Mar 26 10:52:22.179: %SYS-5-RESTART: System restarted --Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M6, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2014 by Cisco Systems, Inc.Compiled Wed 19-Mar-14 19:23 by prod_rel_team*Mar 26 10:52:22.219: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start*Mar 26 10:52:22.847: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF*Mar 26 10:52:22.847: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF*Mar 26 10:52:22.847: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF*Mar 26 10:52:22.847: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFFRouter>enaRouter#config termEnter configuration commands, one per line. End with CNTL/Z.Router(config)#hostname NYEDGE!% Hostname contains one or more illegal characters. % Hostname "NYEDGE!" is not a legal LAT node name, Using "CISCO_000000"NYEDGE!(config)#*Mar 26 10:53:01.623: %CNS-3-WARNING: CNS ID not changed: bad hostname -Process= "Exec", ipl= 0, pid= 30*Mar 26 10:53:01.623: %CNS-3-WARNING: CNS ID not changed: bad hostname -Process= "Exec", ipl= 0, pid= 30*Mar 26 10:53:01.623: %CNS-3-WARNING: CNS ID not changed: bad hostname -Process= "Exec", ipl= 0, pid= 30NYEDGE!(config)#hostname NYEDGE1NYEDGE1(config)#exi
Final review test lab
NYEDGE1#*Mar 26 10:57:54.755: %SYS-5-CONFIG_I: Configured from console by consoleNYEDGE1#config termEnter configuration commands, one per line. End with CNTL/Z.NYEDGE1(config)#interface gigabitethernet0/1NYEDGE1(config-if)#default IP address 172.14.0.0 255.255.255.0NYEDGE1(config-if)#no shutNYEDGE1(config-if)#*Mar 26 10:59:05.319: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down*Mar 26 10:59:08.507: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up*Mar 26 10:59:09.507: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to upNYEDGE1(config-if)#interface gigabitethernet0/0NYEDGE1(config-if)#switchport access ^% Invalid input detected at '^' marker. NYEDGE1(config-if)#?Interface configuration commands: aaa Authentication, Authorization and Accounting. access-expression Build a bridge boolean access expression arp Set arp type (arpa, probe, snap), timeout, log options or packet priority authentication Auth Manager Interface Configuration Commands backup Modify backup parameters bandwidth Set bandwidth informational parameter bfd BFD interface configuration commands bgp-policy Apply policy propagated by bgp community string bridge-group Transparent bridging interface parameters carrier-delay Specify delay for interface transitions cdp CDP interface subcommands channel-group Add this interface to an Etherchannel group clns CLNS interface subcommands cmns OSI CMNS content-scan Content Scan the ingress traffic crypto Encryption/Decryption commands cwmp Configure CPE WAN Management Protocol(CWMP) on this interface dampening Enable event dampening decnet Interface DECnet config commands default Set a command to its defaults delay Specify interface throughput delay
Final review test lab
description Interface specific description dlsw DLSw interface subcommands dot1q dot1q interface configuration commands dot1x Interface Config Commands for IEEE 802.1X dspu Down Stream PU duplex Configure duplex operation. eou EAPoUDP Interface Configuration Commands ethernet Ethernet interface parameters exit Exit from interface configuration mode fhrp Configure FHRP flow-sampler Attach flow sampler to the interface fras DLC Switch Interface Command glbp Gateway Load Balancing Protocol interface commands help Description of the interactive help system history Interface history histograms - 60 second, 60 minute and 72 hour hold-queue Set hold queue depth ip Interface Internet Protocol config commands iphc-profile Configure IPHC profile ipv6 IPv6 interface subcommands isis IS-IS commands iso-igrp ISO-IGRP interface subcommands keepalive Enable keepalive lan-name LAN Name command lat LAT commands llc2 LLC2 Interface Subcommands lldp LLDP interface subcommands load-interval Specify interval for load calculation for an interface locaddr-priority Assign a priority group logging Configure logging for interface loopback Configure internal loopback on an interface mab MAC Authentication Bypass Interface Config Commands mac-address Manually set interface MAC address mace Measurement Aggregation and Correlation Engine macro Command macro media-proxy Enable media proxy services metadata Metadata Application mop DEC MOP server commands mpls Configure MPLS interface parameters mtu Set the interface Maximum Transmission Unit (MTU) netbios Use a defined NETBIOS access list or enable name-caching no Negate a command or set its defaults ntp Configure NTP ospfv3 OSPFv3 interface commands
Final review test lab
pagp PAgP interface subcommands pppoe pppoe interface subcommands pppoe-client pppoe client rate-limit Rate Limit redundancy RG redundancy interface config routing Per-interface routing configuration sap-priority Assign a priority group service-policy Configure CPL Service Policy shutdown Shutdown the selected interface sna SNA pu configuration snapshot Configure snapshot support on the interface snmp Modify SNMP interface parameters source Get config from another source speed Configure speed operation. srlg Interface Shared Risk Link Group config commands standby HSRP interface configuration commands tarp TARP interface subcommands timeout Define timeout values for this interface topology Configure routing topology on the interface transmit-interface Assign a transmit interface to a receive-only interface transport-opt Enable Transport Optimization on an Interface or a Sub-Interface tx-ring-limit Configure PA level transmit ring limit user-group Interface-User-group Association vlan-id Process VLAN-encapsulated packets with a specific VLAN ID vlan-range Process VLAN-encapsulated packets with a range of VLAN IDs vrf VPN Routing/Forwarding parameters on the interface vrrp VRRP Interface configuration commands waas WAN Optimization xconnect Xconnect commands zone-member Apply zone name NYEDGE1(config-if)#NYEDGE1(config-if)#NYEDGE1(config-if)#endNYEDGE1#*Mar 26 11:02:11.303: %SYS-5-CONFIG_I: Configured from console by consoleNYEDGE1#show runBuilding configuration... Current configuration : 1219 bytes!! Last configuration change at 11:02:11 UTC Mon Mar 26 2018
Final review test lab
version 15.2service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname NYEDGE1!boot-start-markerboot-end-marker!!!no aaa new-modelmemory-size iomem 25!ip cef!!!! ! ! ! ! no ipv6 cef! multilink bundle-name authenticated! ! ! ! license udi pid CISCO2911/K9 sn FCZ1845608V! ! ! redundancy! ! ! ! ! !
Final review test lab
! ! ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 no ip address shutdown duplex auto speed auto! interface GigabitEthernet0/1 no ip address duplex auto speed auto! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto! interface Serial0/0/0 no ip address shutdown ! interface Serial0/0/1 no ip address shutdown clock rate 2000000! ! ip forward-protocol nd! no ip http serverno ip http secure-server!
Final review test lab
! ! ! ! control-plane! ! ! line con 0line aux 0line 2 no activation-character no exec transport preferred none transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1line vty 0 4 login transport input all! scheduler allocate 20000 1000! end NYEDGE1#NYEDGE1#NYEDGE1#NYEDGE1#NYEDGE1#NYEDGE1#show interface gigabitethernet0/1GigabitEthernet0/1 is up, line protocol is up Hardware is CN Gigabit Ethernet, address is f07f.062f.5229 (bia f07f.062f.5229) MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full Duplex, 100Mbps, media type is RJ45 output flow-control is unsupported, input flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:06, output 00:00:04, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max)
Final review test lab
5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 53 packets input, 3072 bytes, 0 no buffer Received 9 broadcasts (0 IP multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 9 multicast, 0 pause input 34 packets output, 3804 bytes, 0 underruns 0 output errors, 0 collisions, 1 interface resets 9 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped outNYEDGE1#NYEDGE1#NYEDGE1#NYEDGE1#NYEDGE1#NYEDGE1#NYEDGE1#ping 172.14.0.0% Unrecognized host or address, or protocol not running.
Final review test lab
NYEDGE1 con0 is now available Press RETURN to get started.
NYEDGE2 System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 2012 by cisco Systems, Inc. Total memory size = 512 MB - On-board = 512 MB, DIMM0 = 0 MBCISCO2911/K9 platform with 524288 Kbytes of main memoryMain memory is configured to 72/-1(On-board/DIMM0) bit mode with ECC enabled Readonly ROMMON initializedprogram load complete, entry point: 0x80803000, size: 0x1b340program load complete, entry point: 0x80803000, size: 0x1b340 IOS Image Load Test ___________________ Digitally Signed Release Software program load complete, entry point: 0x81000000, size: 0x5e8ba54Self decompressing the image : #####################################################################################################
Final review test lab
##################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### [OK] Smart Init is enabledsmart init is sizing iomem TYPE MEMORY_REQ HWIC Slot 0 0x00200000 Onboard devices & buffer pools 0x0228F000 ----------------------------------------------- TOTAL: 0x0248F000 Rounded IOMEM up to: 40Mb.Using 7 percent iomem. [40Mb/512Mb] Restricted Rights Legend Use, duplication, or disclosure by the Government issubject to restrictions as set forth in subparagraph(c) of the Commercial Computer Software - RestrictedRights clause at FAR sec. 52.227-19 and subparagraph(c) (1) (ii) of the Rights in Technical Data and ComputerSoftware clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M6, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2014 by Cisco Systems, Inc.
Final review test lab
Compiled Wed 19-Mar-14 19:23 by prod_rel_team Would you like to enter the initial configuration dialog? [yes/no]: % Please answer 'yes' or 'no'.Would you like to enter the initial configuration dialog? [yes/no]: n Press RETURN to get started! *Jan 2 00:00:04.971: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = ipbasek9 and License = ipbasek9*Jan 2 00:00:05.127: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = securityk9 and License = securityk9*Jan 2 00:00:05.307: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c2900 Next reboot level = datak9 and License = datak9*Mar 27 05:27:56.239: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory*Mar 27 05:27:56.247: c3600_scp_set_dstaddr2_idb(184)add = 80 name is Embedded-Service-Engine0/0*Mar 27 05:28:16.219: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Initialized *Mar 27 05:28:16.223: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State changed to: Enabled *Mar 27 05:28:17.231: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down*Mar 27 05:28:17.231: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up*Mar 27 05:28:17.231: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed state to down*Mar 27 05:28:17.231: %LINK-3-UPDOWN: Interface Serial0/0/0, changed state to down*Mar 27 05:28:17.231: %LINK-3-UPDOWN: Interface Serial0/0/1, changed state to down*Mar 27 05:28:18.319: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down*Mar 27 05:28:18.319: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
Final review test lab
*Mar 27 05:28:18.319: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/2, changed state to down*Mar 27 05:28:18.319: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to down*Mar 27 05:28:18.319: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to down*Mar 27 05:28:19.187: %SYS-6-STARTUP_CONFIG_IGNORED: System startup configuration is ignored based on the configuration register setting.*Mar 27 05:38:41.719: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down*Mar 27 05:38:43.059: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down*Mar 27 05:38:43.059: %LINK-5-CHANGED: Interface GigabitEthernet0/1, changed state to administratively down*Mar 27 05:38:43.059: %LINK-5-CHANGED: Interface GigabitEthernet0/2, changed state to administratively down*Mar 27 05:38:43.059: %LINK-5-CHANGED: Interface Serial0/0/0, changed state to administratively down*Mar 27 05:38:43.059: %LINK-5-CHANGED: Interface Serial0/0/1, changed state to administratively down*Mar 27 05:38:44.103: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down*Mar 27 05:38:44.103: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to down*Mar 27 05:38:45.135: %SYS-5-RESTART: System restarted --Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M6, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2014 by Cisco Systems, Inc.Compiled Wed 19-Mar-14 19:23 by prod_rel_team*Mar 27 05:38:45.175: %SNMP-5-COLDSTART: SNMP agent on host Router is undergoing a cold start*Mar 27 05:38:45.803: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF*Mar 27 05:38:45.807: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF*Mar 27 05:38:45.807: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF*Mar 27 05:38:45.807: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFFRouter>enaRouter#config termEnter configuration commands, one per line. End with CNTL/Z.Router(config)#hostname NYEDGE2NYEDGE2(config)#endNYEDGE2#*Mar 27 05:39:32.203: %SYS-5-CONFIG_I: Configured from console by console
Final review test lab
NYEDGE2#show run briefBuilding configuration... Current configuration : 1228 bytes!! Last configuration change at 05:39:32 UTC Tue Mar 27 2018version 15.2service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname NYEDGE2!boot-start-markerboot-end-marker!!!no aaa new-model!ip cef!!!! ! ! ! ! no ipv6 cef! multilink bundle-name authenticated! ! ! ! license udi pid CISCO2911/K9 sn FGL19021078! ! ! redundancy!
Final review test lab
! ! ! ! ! ! ! ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 no ip address shutdown duplex auto speed auto! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto! interface Serial0/0/0 no ip address shutdown clock rate 2000000! interface Serial0/0/1 no ip address shutdown clock rate 2000000
Final review test lab
! ! ip forward-protocol nd! no ip http serverno ip http secure-server! ! ! ! ! control-plane! ! ! line con 0line aux 0line 2 no activation-character no exec transport preferred none transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1line vty 0 4 login transport input all! scheduler allocate 20000 1000! end NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#
Final review test lab
NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#config termEnter configuration commands, one per line. End with CNTL/Z.NYEDGE2(config)#interface gigabitethernet01% Incomplete command. NYEDGE2(config)#interface gigabitethernet0/1NYEDGE2(config-if)#ip broadcast-address 172.16.3.0NYEDGE2(config-if)#endNYEDGE2#*Mar 27 05:41:25.627: %SYS-5-CONFIG_I: Configured from console by consoleNYEDGE2#show runBuilding configuration... Current configuration : 1261 bytes!! Last configuration change at 05:41:25 UTC Tue Mar 27 2018version 15.2service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname NYEDGE2!boot-start-markerboot-end-marker!!!no aaa new-model!ip cef!!!!
Final review test lab
! ! ! ! no ipv6 cef! multilink bundle-name authenticated! ! ! ! license udi pid CISCO2911/K9 sn FGL19021078! ! ! redundancy! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 no ip address shutdown duplex auto speed auto! interface GigabitEthernet0/1 no ip address ip broadcast-address 172.16.3.0 shutdown
Final review test lab
duplex auto speed auto! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto! interface Serial0/0/0 no ip address shutdown clock rate 2000000! interface Serial0/0/1 no ip address shutdown clock rate 2000000! ! ip forward-protocol nd! no ip http serverno ip http secure-server! ! ! ! ! control-plane! ! ! line con 0line aux 0line 2 no activation-character no exec transport preferred none transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1line vty 0 4 login transport input all
Final review test lab
! scheduler allocate 20000 1000! end NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#NYEDGE2#config termEnter configuration commands, one per line. End with CNTL/Z.NYEDGE2(config)#interface gigabitethernet0/1NYEDGE2(config-if)#no shutdownNYEDGE2(config-if)#*Mar 27 05:42:41.943: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to down*Mar 27 05:42:45.231: %LINK-3-UPDOWN: Interface GigabitEthernet0/1, changed state to up*Mar 27 05:42:46.251: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to upNYEDGE2(config-if)#exNYEDGE2(config)#ex% Ambiguous command: "ex"NYEDGE2(config)#config term ^% Invalid input detected at '^' marker. NYEDGE2(config)#ex% Ambiguous command: "ex"NYEDGE2(config)#ex% Ambiguous command: "ex"
Final review test lab
NYEDGE2 con0 is now available Press RETURN to get started. *Mar 27 05:53:15.303: %SYS-5-CONFIG_I: Configured from console by consoleNYEDGE2>
NYCORE1 NYCORE1>enNYCORE1#config tEnter configuration commands, one per line. End with CNTL/Z.NYCORE1(config)#exitNYCORE1#*Mar 1 00:27:52.344: %SYS-5-CONFIG_I: Configured from console by consolevlan database% Warning: It is recommended to configure VLAN from config mode, as VLAN database mode is being deprecated. Please consult user documentation for configuring VTP/VLAN in config mode. NYCORE1(vlan)#vlan 4VLAN 4 added:
Final review test lab
Name: VLAN0004NYCORE1(vlan)#name engineering ^% Invalid input detected at '^' marker. NYCORE1(vlan)#decription engineering ^% Invalid input detected at '^' marker. NYCORE1(vlan)#engineering ^% Invalid input detected at '^' marker. NYCORE1(vlan)#vlan 5VLAN 5 added: Name: VLAN0005NYCORE1(vlan)#vlan 8VLAN 8 added: Name: VLAN0008NYCORE1(vlan)#vlan 9VLAN 9 added: Name: VLAN0009NYCORE1(vlan)#vlan 12VLAN 12 added: Name: VLAN0012NYCORE1(vlan)#vlan 13VLAN 13 added: Name: VLAN0013NYCORE1(vlan)#vlan 16VLAN 16 added: Name: VLAN0016NYCORE1(vlan)#vlan 17VLAN 17 added: Name: VLAN0017NYCORE1(vlan)#exitAPPLY completed.Exiting....NYCORE1#sh vlan VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default active Fa1/0/1, Fa1/0/2, Fa1/0/3 Fa1/0/4, Fa1/0/5, Fa1/0/6 Fa1/0/7, Fa1/0/8, Fa1/0/9 Fa1/0/10, Fa1/0/11, Fa1/0/12 Fa1/0/13, Fa1/0/14, Fa1/0/15 Fa1/0/16, Fa1/0/17, Fa1/0/18 Fa1/0/19, Fa1/0/20, Fa1/0/21 Fa1/0/22, Fa1/0/23, Fa1/0/24 Gi1/0/1, Gi1/0/24 VLAN0004 active 5 VLAN0005 active
Final review test lab
8 VLAN0008 active 9 VLAN0009 active 12 VLAN0012 active 13 VLAN0013 active 16 VLAN0016 active 17 VLAN0017 active 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------1 enet 100001 1500 - - - - - 0 0 4 enet 100004 1500 - - - - - 0 0 5 enet 100005 1500 - - - - - 0 0 8 enet 100008 1500 - - - - - 0 0 9 enet 100009 1500 - - - - - 0 0 12 enet 100012 1500 - - - - - 0 0 13 enet 100013 1500 - - - - - 0 0 16 enet 100016 1500 - - - - - 0 0 17 enet 100017 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 tr 101003 1500 - - - - - 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 1005 trnet 101005 1500 - - - ibm - 0 0 Remote SPAN VLANs------------------------------------------------------------------------------ Primary Secondary Type Ports------- --------- ----------------- ------------------------------------------ NYCORE1#config tEnter configuration commands, one per line. End with CNTL/Z.NYCORE1(config)#vlan 4NYCORE1(config-vlan)#name engineeringNYCORE1(config-vlan)#vlan 5NYCORE1(config-vlan)#sales ^% Invalid input detected at '^' marker. NYCORE1(config-vlan)#name salesNYCORE1(config-vlan)#vlan 8NYCORE1(config-vlan)#name human_resourcesNYCORE1(config-vlan)#vlan 9NYCORE1(config-vlan)#name research
Final review test lab
NYCORE1(config-vlan)#vlan 12NYCORE1(config-vlan)#name researchVLAN #12 and #9 have an identical name: researchNYCORE1(config-vlan)#vlan 9NYCORE1(config-vlan)#name securityNYCORE1(config-vlan)#vlan 13NYCORE1(config-vlan)#name developmentNYCORE1(config-vlan)#vlan16 ^% Invalid input detected at '^' marker. NYCORE1(config-vlan)#vlan 16NYCORE1(config-vlan)#information_tech ^% Invalid input detected at '^' marker. NYCORE1(config-vlan)#name information_techNYCORE1(config-vlan)#vlan 17NYCORE1(config-vlan)#name build_vlanNYCORE1(config-vlan)#exitNYCORE1(config)#exitNYCORE1#*Mar 1 00:35:46.778: %SYS-5-CONFIG_I: Configured from console by consolesh vlan VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default active Fa1/0/1, Fa1/0/2, Fa1/0/3 Fa1/0/4, Fa1/0/5, Fa1/0/6 Fa1/0/7, Fa1/0/8, Fa1/0/9 Fa1/0/10, Fa1/0/11, Fa1/0/12 Fa1/0/13, Fa1/0/14, Fa1/0/15 Fa1/0/16, Fa1/0/17, Fa1/0/18 Fa1/0/19, Fa1/0/20, Fa1/0/21 Fa1/0/22, Fa1/0/23, Fa1/0/24 Gi1/0/1, Gi1/0/24 engineering active 5 sales active 8 human_resources active 9 security active 12 VLAN0012 active 13 development active 16 information_tech active 17 build_vlan active 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1005 trnet-default act/unsup
Final review test lab
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------1 enet 100001 1500 - - - - - 0 0 4 enet 100004 1500 - - - - - 0 0 5 enet 100005 1500 - - - - - 0 0 8 enet 100008 1500 - - - - - 0 0 9 enet 100009 1500 - - - - - 0 0 12 enet 100012 1500 - - - - - 0 0 13 enet 100013 1500 - - - - - 0 0 16 enet 100016 1500 - - - - - 0 0 17 enet 100017 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 tr 101003 1500 - - - - - 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 1005 trnet 101005 1500 - - - ibm - 0 0 Remote SPAN VLANs------------------------------------------------------------------------------ Primary Secondary Type Ports------- --------- ----------------- ------------------------------------------ NYCORE1#config tEnter configuration commands, one per line. End with CNTL/Z.NYCORE1(config)#vlan 12NYCORE1(config-vlan)#name researchNYCORE1(config-vlan)#exitNYCORE1(config)#exitNYCORE1#*Mar 27 00:36:50.305: %SYS-5-CONFIG_I: Configured from console by consolesh vlan VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default active Fa1/0/1, Fa1/0/2, Fa1/0/3 Fa1/0/4, Fa1/0/5, Fa1/0/6 Fa1/0/7, Fa1/0/8, Fa1/0/9 Fa1/0/10, Fa1/0/11, Fa1/0/12 Fa1/0/13, Fa1/0/14, Fa1/0/15 Fa1/0/16, Fa1/0/17, Fa1/0/18 Fa1/0/19, Fa1/0/20, Fa1/0/21 Fa1/0/22, Fa1/0/23, Fa1/0/24 Gi1/0/1, Gi1/0/24 engineering active 5 sales active 8 human_resources active 9 security active 12 research active 13 development active 16 information_tech active
Final review test lab
17 build_vlan active 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1005 trnet-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------1 enet 100001 1500 - - - - - 0 0 4 enet 100004 1500 - - - - - 0 0 5 enet 100005 1500 - - - - - 0 0 8 enet 100008 1500 - - - - - 0 0 9 enet 100009 1500 - - - - - 0 0 12 enet 100012 1500 - - - - - 0 0 13 enet 100013 1500 - - - - - 0 0 16 enet 100016 1500 - - - - - 0 0 17 enet 100017 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 tr 101003 1500 - - - - - 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 1005 trnet 101005 1500 - - - ibm - 0 0 Remote SPAN VLANs------------------------------------------------------------------------------ Primary Secondary Type Ports------- --------- ----------------- ------------------------------------------
Final review test lab
NYCORE1 con0 is now available Press RETURN to get started. NYCORE1>enNYCORE1#config tEnter configuration commands, one per line. End with CNTL/Z.NYCORE1(config)#vtp ? domain Set the name of the VTP administrative domain. file Configure IFS filesystem file where VTP configuration is stored. interface Configure interface as the preferred source for the VTP IP updater address. mode Configure VTP device mode password Set the password for the VTP administrative domain pruning Set the administrative domain to permit pruning version Set the administrative domain to VTP version NYCORE1(config)#vtp mode ? client Set the device to client mode. off Set the device to off mode. server Set the device to server mode. transparent Set the device to transparent mode. NYCORE1(config)#vtp mode serverDevice mode already VTP Server for VLANS.NYCORE1(config)#vtp ver 2NYCORE1(config)#vtp domain practice-labs.comChanging VTP domain name from NULL to practice-labs.comNYCORE1(config)#*Mar 1 01:05:15.458: %SW_VLAN-6-VTP_DOMAIN_NAME_CHG: VTP domain name changed to practice-labs.com.NYCORE1(config)#vlan ? WORD ISL VLAN IDs 1-4094 access-map Create vlan access-map or enter vlan access-map command mode dot1q dot1q parameters
Final review test lab
filter Apply a VLAN Map group Create a vlan group internal internal VLAN NYCORE1(config)#vlan range ? NYCORE1(config)#vlan range 4 - 17 ^% Invalid input detected at '^' marker. NYCORE1(config)#int vlan range 4-17 ^% Invalid input detected at '^' marker. NYCORE1(config)#int vlan 4 - 17 ^% Invalid input detected at '^' marker. NYCORE1(config)#*Mar 1 01:11:49.362: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan4, changed state to downNYCORE1(config)#int fa1/0/22NYCORE1(config-if)#sw trunk ? allowed Set allowed VLAN characteristics when interface is in trunking mode encapsulation Set trunking encapsulation when interface is in trunking mode native Set trunking native characteristics when interface is in trunking mode pruning Set pruning VLAN characteristics when interface is in trunking mode NYCORE1(config-if)#sw trunk encapsulation dot1qNYCORE1(config-if)#sw trunk allowed ? vlan Set allowed VLANs when interface is in trunking mode NYCORE1(config-if)#sw trunk allowed vlan 4,5,8,9,12,13,16,17NYCORE1(config-if)#exitNYCORE1(config)#int port-channel 1NYCORE1(config-if)#?Interface configuration commands: arp Set arp type (arpa, probe, snap) or timeout bandwidth Set bandwidth informational parameter bgp-policy Apply policy propagated by bgp community string carrier-delay Specify delay for interface transitions cdp CDP interface subcommands dampening Enable event dampening default Set a command to its defaults delay Specify interface throughput delay description Interface specific description duplex Configure duplex operation. eou EAPoUDP Interface Configuration Commands
Final review test lab
exit Exit from interface configuration mode flowcontrol Configure flow operation. help Description of the interactive help system hold-queue Set hold queue depth ip Interface Internet Protocol config commands isis IS-IS commands iso-igrp ISO-IGRP interface subcommands keepalive Enable keepalive l2protocol-tunnel Tunnel Layer2 protocols link Configure Link load-interval Specify interval for load calculation for an interface logging Configure logging for interface macro Command macro max-reserved-bandwidth Maximum Reservable Bandwidth on an Interface mka MACsec Key Agreement (MKA) interface configuration mvr MVR per port configuration neighbor interface neighbor configuration mode commands network-policy Network Policy nmsp NMSP interface configuration no Negate a command or set its defaults service-policy Configure QoS Service Policy shutdown Shutdown the selected interface snmp Modify SNMP interface parameters source Get config from another source spanning-tree Spanning Tree Subsystem speed Configure speed operation. storm-control storm configuration switchport Set switching mode characteristics timeout Define timeout values for this interface transmit-interface Assign a transmit interface to a receive-only interface tx-ring-limit Configure PA level transmit ring limit vtp Enable VTP on this interface NYCORE1(config-if)#l2protocol-tunnel ? cdp Cisco Discovery Protocol drop-threshold Set drop threshold for protocol packets lldp Link Layer Discovery Protocol point-to-point point-to-point L2 Protocol shutdown-threshold Set shutdown threshold for protocol packets stp Spanning Tree Protocol vtp Vlan Trunking Protocol NYCORE1(config-if)#l2protocol-tunnel vtp ? NYCORE1(config-if)#l2protocol-tunnel vtp NYCORE1(config-if)#vlan 4NYCORE1(config-vlan)#no shut%VLAN 4 is not shutdown.
Final review test lab
NYCORE1(config-vlan)#endNYCORE1#*Mar 1 01:19:52.956: %SYS-5-CONFIG_I: Configured from console by consolesh vlan VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default active Fa1/0/1, Fa1/0/2, Fa1/0/3 Fa1/0/4, Fa1/0/5, Fa1/0/6 Fa1/0/7, Fa1/0/8, Fa1/0/9 Fa1/0/10, Fa1/0/11, Fa1/0/12 Fa1/0/13, Fa1/0/14, Fa1/0/15 Fa1/0/16, Fa1/0/17, Fa1/0/18 Fa1/0/19, Fa1/0/20, Fa1/0/21 Fa1/0/22, Fa1/0/23, Fa1/0/24 Gi1/0/1, Gi1/0/24 engineering active 5 sales active 8 human_resources active 9 security active 12 research active 13 development active 16 information_tech active 17 build_vlan active 1002 fddi-default act/unsup 1003 trcrf-default act/unsup 1004 fddinet-default act/unsup VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1005 trbrf-default act/unsup VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------1 enet 100001 1500 - - - - - 0 0 4 enet 100004 1500 - - - - - 0 0 5 enet 100005 1500 - - - - - 0 0 8 enet 100008 1500 - - - - - 0 0 9 enet 100009 1500 - - - - - 0 0 12 enet 100012 1500 - - - - - 0 0 13 enet 100013 1500 - - - - - 0 0 16 enet 100016 1500 - - - - - 0 0 17 enet 100017 1500 - - - - - 0 0 1002 fddi 101002 1500 - - - - - 0 0 1003 trcrf 101003 4472 1005 3276 - - srb 0 0 1004 fdnet 101004 1500 - - - ieee - 0 0 1005 trbrf 101005 4472 - - 15 ibm - 0 0 VLAN AREHops STEHops Backup CRF---- ------- ------- ----------
Final review test lab
1003 7 7 off Remote SPAN VLANs------------------------------------------------------------------------------ Primary Secondary Type Ports------- --------- ----------------- ------------------------------------------ NYCORE1 con0 is now available Press RETURN to get started. *Mar 1 01:32:13.972: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0/23, changed state to down
Final review test lab
*Mar 1 01:32:14.014: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0/24, changed state to down*Mar 1 01:32:15.977: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0/23, changed state to up*Mar 1 01:32:16.019: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0/24, changed state to up*Mar 1 01:32:35.187: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0/23, changed state to down*Mar 1 01:32:35.196: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0/24, changed state to down*Mar 1 01:32:37.192: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0/23, changed state to up*Mar 1 01:32:37.200: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0/24, changed state to upNYCORE1>enNYCORE1#config tEnter configuration commands, one per line. End with CNTL/Z.NYCORE1(config)#int port-channel 1NYCORE1(config-if)#channel-group 1 mode ?% Unrecognized commandNYCORE1(config-if)#channel-group 1 mode ?% Unrecognized commandNYCORE1(config-if)#channel-group 1? % Unrecognized commandNYCORE1(config-if)#? Interface configuration commands: arp Set arp type (arpa, probe, snap) or timeout bandwidth Set bandwidth informational parameter bgp-policy Apply policy propagated by bgp community string carrier-delay Specify delay for interface transitions cdp CDP interface subcommands dampening Enable event dampening default Set a command to its defaults delay Specify interface throughput delay description Interface specific description duplex Configure duplex operation. eou EAPoUDP Interface Configuration Commands exit Exit from interface configuration mode flowcontrol Configure flow operation. help Description of the interactive help system hold-queue Set hold queue depth ip Interface Internet Protocol config commands isis IS-IS commands iso-igrp ISO-IGRP interface subcommands keepalive Enable keepalive l2protocol-tunnel Tunnel Layer2 protocols link Configure Link load-interval Specify interval for load calculation for an interface logging Configure logging for interface macro Command macro max-reserved-bandwidth Maximum Reservable Bandwidth on an Interface
Final review test lab
mka MACsec Key Agreement (MKA) interface configuration mvr MVR per port configuration neighbor interface neighbor configuration mode commands network-policy Network Policy nmsp NMSP interface configuration no Negate a command or set its defaults service-policy Configure QoS Service Policy shutdown Shutdown the selected interface snmp Modify SNMP interface parameters source Get config from another source spanning-tree Spanning Tree Subsystem speed Configure speed operation. storm-control storm configuration switchport Set switching mode characteristics timeout Define timeout values for this interface transmit-interface Assign a transmit interface to a receive-only interface tx-ring-limit Configure PA level transmit ring limit vtp Enable VTP on this interface NYCORE1(config-if)#duplex fullNYCORE1(config-if)#speed 100NYCORE1(config-if)#no shutNYCORE1(config-if)#int range fa1/0/23 - 24NYCORE1(config-if-range)#no shut speed 100 ^% Invalid input detected at '^' marker. NYCORE1(config-if-range)#no shutNYCORE1(config-if-range)#speed 100NYCORE1(config-if-range)#d*Mar 1 01:37:03.849: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0/23, changed state to down*Mar 1 01:37:03.858: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0/24, changed state to downup*Mar 1 01:37:04.847: %LINK-3-UPDOWN: Interface FastEthernet1/0/23, changed state to down*Mar 1 01:37:04.856: %LINK-3-UPDOWN: Interface FastEthernet1/0/24, changed state to downlex fullNYCORE1(config-if-range)#channel-group 1 mode ? active Enable LACP unconditionally auto Enable PAgP only if a PAgP device is detected desirable Enable PAgP unconditionally on Enable Etherchannel only passive Enable LACP only if a LACP device is detected NYCORE1(config-if-range)#channel-group 1 mode autoNYCORE1(config-if-range)#endNYCORE1#
Final review test lab
NYCORE1 con0 is now available Press RETURN to get started. NYCORE1>en NYCORE1#ping 192.168.16.10% Unrecognized host or address, or protocol not running.
Final review test lab
NYCORE1 con0 is now available Press RETURN to get started. NYCORE1>enNYCORE1#config tEnter configuration commands, one per line. End with CNTL/Z.NYCORE1(config)#vlan range ? NYCORE1(config)#vlan ? WORD ISL VLAN IDs 1-4094 access-map Create vlan access-map or enter vlan access-map command mode dot1q dot1q parameters filter Apply a VLAN Map group Create a vlan group internal internal VLAN NYCORE1(config)#int vlan 4NYCORE1(config-if)#?Interface configuration commands: access-expression Build a bridge boolean access expression arp Set arp type (arpa, probe, snap) or timeout bandwidth Set bandwidth informational parameter bgp-policy Apply policy propagated by bgp community string bridge-group Transparent bridging interface parameters carrier-delay Specify delay for interface transitions
Final review test lab
cdp CDP interface subcommands clns CLNS interface subcommands dampening Enable event dampening default Set a command to its defaults delay Specify interface throughput delay description Interface specific description eou EAPoUDP Interface Configuration Commands exit Exit from interface configuration mode glbp Gateway Load Balancing Protocol interface commands help Description of the interactive help system hold-queue Set hold queue depth ip Interface Internet Protocol config commands isis IS-IS commands iso-igrp ISO-IGRP interface subcommands link Configure Link load-interval Specify interval for load calculation for an interface logging Configure logging for interface loopback Configure internal loopback on an interface macro Command macro max-reserved-bandwidth Maximum Reservable Bandwidth on an Interface mka MACsec Key Agreement (MKA) interface configuration neighbor interface neighbor configuration mode commands network-policy Network Policy nmsp NMSP interface configuration no Negate a command or set its defaults ntp Configure NTP private-vlan Configure private VLAN SVI interface settings rate-limit Rate Limit service-policy Configure QoS Service Policy shutdown Shutdown the selected interface snmp Modify SNMP interface parameters source Get config from another source spanning-tree Spanning Tree Subsystem standby HSRP interface configuration commands timeout Define timeout values for this interface vtp Enable VTP on this interface NYCORE1(config-if)#exitNYCORE1(config)#vlan ? WORD ISL VLAN IDs 1-4094 access-map Create vlan access-map or enter vlan access-map command mode dot1q dot1q parameters filter Apply a VLAN Map group Create a vlan group internal internal VLAN NYCORE1(config)#vlan access ? WORD Vlan access map tag NYCORE1(config)#
top related