we dont just go with the flow, we create it.. introduction to chemflo and frx do your customers use...

We don’t just go with the flow, we create it.

Introduction to Chemflo and FRX

• Do your customers use 316 SS end suction centrifugal pumps?

• Do you need an answer to high priced 316 SS units?• Do your customers need a better option than a stamped

stainless steel pump?• Are lead times hurting your sales efforts?• Would you like to capture that 316SS pump business?• Then MP Pumps Chemflo and FRX pumps may be your

answer!!• Two of our fastest growing lines at MP Pumps

• Chemflo pumps are 316 SS investment cast pumps• Developed to be a high quality, cost effective presence

for MP Pumps in the stainless steel pump market• Broken into two groups

– Small Chemflo’s (CF 1-4)• 5 HP or less, small motor frames• NPT threaded connections

– Large Chemflo’s (CF 5-9)• 5 HP up to 40 HP, larger motor frames• ANSI 150 class flat flange connections

Product Description

Product Description

• Flows up to 450 gpm and head up to 460’• Many standard and optional features such as

– Wide range of mechanical seals– Pedestal, close coupled, or Pumpak® – Multiple drive options available– Cast bosses for flush ports

• Numerous applications throughout the industrial, agricultural, marine, commercial, and OEM markets

• Excellent option for the customer looking to upgrade to a investment cast 316 SS pump

• Small Chemflo pumps (CF 1-4)• Sizes

– 1.5” x 1” (CF 1-2)– 2” x 1.5” (CF 3-4)

• Available in several drive and mounting configurations– Pedestal mounted– PumPak®

• Close coupled to– Electric motors– Hydraulic motor (.22 and .37 cu. in.)

Small Chemflo family

• Flows up to 200 gpm and head up to 128’

– CF3 pump has a “High Flow” impeller • Enclosed impellers are being evaluated• And the small Chemflo pumps are available in…

– Nickel Bronze Aluminum (NiBrAl) CA958 material– CFB 1 thru 4 – Same investment cast quality product– Excellent choice for warm seawater applications– Desalination units– Sales brochures on our website for CFB pumps

Small Chemflo family

Small Chemflo family

• No thin wall stampings or welds• NPT threaded connections• Open impellers• Drive sleeve design• T-2100 mechanical seals

– Carbon/Ceramic/Viton• Seal flush connections optional• C-face to 56C and 145TC motors• 56C frame motors do not need a base• 145TC frame motors require a base

• Large Chemflo pumps (CF 5-9)• Sizes

– 2” x 1.5” (CF5)– 3” x 2” (CF6)– 2” x 1” x 8” (CF7) – 3” x 1.5” (CF8)– 2” x 1” x 10” (CF9)

• Available in several drive and mounting configurations– Pedestal mounted – PumPak®

• Close coupled to – Electric motors – Hydraulic motors (1.16 and 1.59 cu.in.)

Large Chemflo family

• Flows up to 450 gpm and head up to 460’

• ANSI 150 class flat flanges

• Enclosed impeller

• Seal flush connections optional

• Type 2100 mechanical seal

• Carbon/Ceramic/Viton

Large Chemflo family

• Drive sleeve design

• C-faced to 145TC thru 286TSC

• Hydraulic driven units in CF 5-8

• Engine drive available for CF 5/6

• Bearing housings have cast feet

• All close coupled units require motor base

Large Chemflo family

Chemflo Applications

• Pharmaceutical• Chemical transfer• DEF (Diesel Exhaust Fluid) – for larger volume transfer

in stationary bulk transfer applications• Potable water• Deicing – spraying salt brine on roads or landing strips

for pretreatment • Desalination• Breweries• Produced water

Fractional Horsepower 316 SS Pumps

• A little pump with a lot of value!

• Stainless steel pumps for lower flow transfer of fluids from water to chemicals to petroleum.

• Four sizes available

• ½”, ¾”, 1”, and 1-¼”x 1”

• Patented ¾” self priming unit!

Fractional Horsepower 316 SS Pumps

• AC, DC, and Hydraulic drives available

• Various seal options available

• ISO 8846 marine ignition proof motor available

• Flows up to 74 gpm and head up to 87’

• Solves those small pump application needs!

FRX 75-SP ¾” Self-Priming pump

• The FRX 75-SP• Patented ¾” self priming unit!• Self-primer lifts up to 12’• AC, DC, and Hydraulic drives available• ISO 8846 marine ignition proof motor available• 12 and 24VDC• 115 and 230 VAC• .08 cu. in. hydraulic motor• Flows up to 21 gpm and 28’ of head with electric motor• Flows up to 30 gpm and 21 psi with hydraulic motor

FRX 75-SP ¾” Self-Priming pump

• FRX 50 and FRX 75 available with DC motors

• FRX 50 has ½” NPT or 1” Hose connections

• FRX 50 and FRX 75 utilize open impellers

• FRX 100 and 125 impellers can be trimmed

• FRX 125 has High Flow impeller

Fractional Horsepower 316 SS Pumps

• Pump discharge can be vertical or horizontal

• We continually strive to grow and offer new products

• In the future, FRX 100 with DC electric motor

• Looking for applications and interest in this product

• Newly released additions to the FRX line…

Fractional Horsepower 316 SS Pumps

• The FRX 75H (Hose)

Introducing…

• 316 SS investment castings• 1” hose connections• Carbon/Ceramic/Viton mechanical seal • Same performance as the standard FRX 75• Drive options available:• 115 VAC ODP and TENV• 230 VAC TENV• 12V, 24V, and 32VDC• FRX 75 H 1" x 1" Hose Connection End Suction Centrifu

gal Pump

FRX 75H details

• The FRX 75P (PPS)

Introducing…

• Polyphenylene Sulfide material housing and cover• 316 SS impeller• 1” hose connections• Carbon/Ceramic/Viton mechanical seal • Same performance as the standard FRX 75• Drive options available:• 115 VAC ODP and TENV• 230 VAC TENV• 12V, 24V, and 32VDC• FRX 75 P 1" x 1" Hose Connection End Suction Centrifu

gal Pump

FRX 75P details

FRX Dual rated motor

• 1/6 HP, 1ph, 115/230V, 50/60Hz• Preset to low voltage setting• 18” cable and 115V plug• Easily switched to 230V• Switch inside of conduit box• Remove low voltage plug• Adds to versatility of FRX 75

• Circulating• Dispensing• Low volume transfer• DEF (Diesel Exhaust Fluid) – for bulk to tote, tote to tote

and small metering and dispensing• Marine A/C units• Bait well circulation• Warewash• Marine hydraulics cooling• Agricultural • Saltwater brine de-icing • Heat tracing

FRX Applications

What is the sell?

• High quality investment cast 316 SS pumps

• Versatility of the Pumpak® option

• Pricing, Pricing, Pricing!!!!

• Feedback from distributors is extremely positive!

• Generally lead times are 2 to 3 weeks A.R.O.

• Large amount of in stock spare parts

Webinar Series Continues

• We will be continuing our webinar series later this summer.

• We are interested in your feedback on webinar subjects that you would like to see.

• Contact us with your ideas.

• Check out our website, www.mppumps.com