type: 6 led new construction, ic & non-ic dlei6 with dm...
Post on 15-May-2020
1 Views
Preview:
TRANSCRIPT
www.dmf lighting.com 1.800.441.4422 DesigneD & assembleD in the Usa Specif iations subject to change without notice. Issued: 03.02.12
B
C
D
A-Ceiling Cut-Out
A 6 3/8” (162mm)B 7 1/2” (190mm)
C 9” (229mm)D 7” (178mm)
DLEI66” LED New Construction Housing
FEATURESThe DLEI6 recessed light-commercial housing is designed to accommodate dmflighting LED 6” down-lights in new construction applications. The fixture is IC & Non-IC rated, AIRTIGHT and California Title-24 compliant. ELECTRICAL: Luminaire accommodates input voltages of 120V; 277V stepdown transformer is also available. LED module install into fixture with a plug-in 120V line voltage IDEAL wiring connector.MOUNTING/INSTALLATION: The housing is equipped with pre-installed adjustable bar hangers to locate the housing between joists with 16” to 24” space. The patented design of the bar hangers allows easy ceiling installation of the housing. into lumber, laminated beams and T-bar.CONSTRUCTION: 22 gauge, galvanized steel mounting frame with pre-wired 18 gauge galvanized steel junction box. Junction box is equipped with (7) 1/2” and (4) 3/4” knockouts with pryout slots. Supplied with quick connectors for supply wire connection. Maximum 1 ½” ceiling thickness.
QUALIFICATIONS / LISTINGS - UL Listed- IC housing is UL Listed for insulation covered ceilings- Through branch circuit wiring (max 8 No.12ga., 90˚C conductors, 4 in - 4 out) - ASTM E283 approved (Airtight)
DM DM7 & DM10 one piece module & trim
APPLICATIONS:The DM7 & DM10 series modules are designed for use with existing, remodel or new construction 6” housings. Fixtures are ideal for a variety of light-commercial and commercial applications. UL quali-fied for both IC & Non-IC applications.OPTICS: Primary: Proprietary integration system mixes and monitors selected light wavelengths to generate consistent color and lumen values over the life of the system. Internal integration lens system also eliminates the undesirable LED “point” appearance.Secondary: Precision spun aluminum trim engineered to control glare while maximizing system ef-ficiency. Trims are available in smooth and baffle with various finishes.Color Mixing: Cree TrueWhite® Technology incorporates a color mixing scheme to generate white light, offering a higher efficacy while maintaining a high CRI. Color correcting technology also ensures color uniformity over the life of the LED. THERMAL MANAGEMENT: Proprietary aluminum heat-sink conducts heat effectively away from LEDs to ensure optimum performance and lifetime. The module has been designed to efficiently trans-fer excessive heat through the trim and to the plenum space.ELECTRICAL: Integral and highly efficient solid state LED driver is accessible from below ceiling plane. Luminaire accommodates input voltages of 120V at 60 Hz. Power factor > .90. Driver is equiped with a thermal reset in the event of over temperature or internal failure. Designed for dimming capability to 15% in normal operation with standard 120V LED-rated, electronic low voltage and incandescent dimmers. (Refer to dmflight.com for a list of DM compatible dimmers)wARRANTy: dmfLIGHTING provides a five year limited warranty on the DM module.
QUALIFICATIONS / LISTINGS - UL Listed- UL Listed for wet locations- LM-79 & LM-80 qualified
SPECS AT A GLANCE:
Rated Life: 50,000 hrs
Warranty: 5 yrs
Lumen Maintenance: 70%
DM 700 LUMENS
DM 1000 LUMENS
Dimmable: 15%
CCT:
CCT:
2,700 K
2,700 K
3,000 K
3,000 K
3,500 K
3,500 K
4,000 K
4,000 K
Delivered:
Delivered:
616 lm
906 lm
616 lm
906 lm
616 lm
906 lm
616 lm
906 lm
CRI:
CRI:
> 90
> 90
> 80
> 90
> 80
> 90
> 80
> 90
Watts:
Watts:
< 12
< 15
< 12
< 15
< 12
< 15
< 12
< 15
Efficacy:
Efficacy:
61 lm/w
60 lm/w
61 lm/w
60 lm/w
61 lm/w
60 lm/w
61 lm/w
60 lm/w
- ASTM E283 approved (Airtight)- IECC and CEC compliant- DOE Energy Star qualified
* Tested with specular trim reflectorNOTE: dmfLIGHTING maintains a tolerance of +/- 5% on flux and power measurements.
Designer Series
Catalog #:
Project:
Type:
Date:
6" LED New Construction, IC & Non-ICDLEI6 with DM Module/Trim
www.dmf lighting.com 1.800.441.4422 DesigneD & assembleD in the Usa Specif iations subject to change without notice. Issued: 03.02.12
6” TrimsFor DM module
PhotometricsFor DM7 module/trims
• DMF LED source engineered to maintain continuous luminous output throughout Kelvin color temperature changes (2,700 through 4,000). • Acceptable Dimmers for DM Series document available online at www.dmflight.com.
ORDERING INFORMATION (Example: DLEI6-2)
Platform
DLEI6
6” LED New Construction Housing
Trim
Choose from above
STEP 2: Choose Trim
ORDERING INFORMATION
ORDERING INFORMATION (Example: L60W)
STEP 1: Choose Housing
Test Report #: 100209762CRT-002-PR1.03
Platform: 6” DM Series
Trim ID #: L60W
Spacing Criteria: 1.02
LPW: 56.37
Degrees Vertical
05152535455565758590
0°
41540835930222911149211130
LUMINANCE (Average cd/m2)
Degrees
4555657585
Average 0° Luminance
79784342252521601749
zONAL LUMEN SUMMARy
Zone
0-30°0-40°0-60°0-90°
Lumens % Lamp % Fixture
274.3407.9529.4563.7
N/AN/AN/AN/A
48.772.493.9100
90º
75º
60º
45º
30º
15º0º
385
315
245
175
105
35
CANDLEPOWER DISTRIbUTION (Candelas)
• Please contact factory for custom finishes.
L60SWRSilver Reflectorw/ White Ring
L60WWhite Reflector
L60DADiffused Annodized
Reflector
L61BWRBlack Ribbed Baffle Cone
w/ White Ring
L61BBlack Ribbed Baffle Cone
L61WWhite Ribbed Baffle Cone w/
White Ring
DM LED Module
Trims for DM Module
STEP 2: Choose Module
STEP 3: Choose Trim
NOTE: DM7 & DM10 is a one piece module & trim combination
Voltage
blank: 120
2: 277*
*Step down transformer included
ORDERING INFORMATION (Example: DM7-9-30-QC)
CRILumens CCT
27: 2,700° K
30: 3,000° K
35: 3,500° K
40: 4,000° K
9: 90+ CRI7: 700 lm10: 1000 lm
9
Platform
DM
Options
EM: Emergency battery
Option
W: Wet Location
Wet location trim option available
L60WWWhite Wall-Wash
QC: Quick Connect
Adapter
QC
top related