training drilling center information notice in october
Post on 14-Feb-2017
214 Views
Preview:
TRANSCRIPT
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 tdcentre@nung.edu.ua, www.nung.edu.ua
Page 1 out of 8
TRAINING DRILLING CENTER
INFORMATION NOTICE
In October 2004 Ivano-Frankivsk National Technical University of Oil and Gas
(IFNTUOG) was accredited by International Well Control Forum (IWCF) and got the
ability to certify drilling personnel by Well Chief manager of IWCF.
Michael Cummins (right on
photo) presented accreditation
certificate to University’s vice-
rector –
Karpash Oleg Mikhailovich
(left on photo)
The necessity of international certification for drilling specialists was determined
by number of accidents. Opening of unknown formations at big depth increases the
risk of losing hydrostatic control in system “well-formation”, which is the first reason
of kick inflow.
Follow such situation – lack of drilling engineer’s qualification and disability to
take the immediate action in emergency situation can result at open gusher. Thus, it
hearts ecological situation and leaf to financial losses.
The solution of these problems was found at international certification of drilling
companies and personnel in different countries according to well control course.
So, these conditions accelerate international organizations to deal with the
questions of blowout security during well drilling in various countries of the world
with a help of personnel certification.
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 tdcentre@nung.edu.ua, www.nung.edu.ua
Page 2 out of 8
To submit these criteria and bring new education services for Ukrainian drilling
personnel it was founded training drilling center in Ivano-Frankivsk National
Technical University of oil and gas.
Training group from public
company “Ukrtransgas”
and “Ukrgasproduction”
are self-studying after
course of lectures in
multimedia room of
training drilling centre
At this new University’s department the main position is at full-size training
drilling simulator DRILLSIM 5000, which was created for imitating different
technological operations while well drilling at different conditions and also for drilling
personnel’s knowledge control during gas kick in a well.
Training simulator DRILLSIM 5000 is equipped by all imitating consoles for
creation real drilling rig control room. There are acoustic effects, which are
synchronized with training operations, creates maximum presents of candidate at
drilling rig.
Soft of training simulator gives to the instructor ability to control all actions of
candidates during their practical study and examination. Instructor can change
parameters of practical exercises both at the beginning of training and during the
training. Immediate changes in drilling or well control conditions during well control
operations gives ability to instructor to create stress situation for candidate. It requires
immediate candidate’s reaction of changed situation and gives them opportunity to
evaluate their actions if it was done at real situation.
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 tdcentre@nung.edu.ua, www.nung.edu.ua
Page 3 out of 8
Offshore and onshore
training console for
DRILLSIM 5000
operating
Central operation console
of DRILLSIM 5000
Our training centre has 2nd, 3rd and 4th LEVEL of accreditation. Education
process with candidates has provided by three-stage system: theoretical course,
practical course (training simulator) and examination. When a person successfully
passes its exam (more than 70% for each exam) it gives him opportunity to get IWCF
certificate. IWCF certification is required in most drilling companies all over the
world.
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 tdcentre@nung.edu.ua, www.nung.edu.ua
Page 4 out of 8
Stuff of training drilling centre
Kolisnyk Vasyl Ivanovych –
IWCF assessment centre manager,
associate professor, Ph.D.,
tel/fax. 00380 (342) 504691,
E-mail: vikolisnyk@nung.edu.ua
Oleksjuk Nikolaj Petrovich –
senior lector,
IWCF assessor
tel/fax. 00380 (3422) 4-21-53,
E-mail: drill@nung.edu.ua
Kostryba Ivan Vasylovych –
associate professor, Ph.D.,
IWCF instructor
tel/fax. +380 (3422) 42353,
E-mail: no@nung.edu.ua
Kolisnyk Roma Antinivna –
Laboratory chief of training centre
tel/fax. +380 (342) 504691,
E-mail: tdcentre@nung.edu.ua
Hrymaniuk Volodymyr –
IWCF instructor
tel/fax. +380 (342) 504691,
E-mail: tdcentre@nung.edu.ua
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 tdcentre@nung.edu.ua, www.nung.edu.ua
Page 5 out of 8
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 tdcentre@nung.edu.ua, www.nung.edu.ua
Page 6 out of 8
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 tdcentre@nung.edu.ua, www.nung.edu.ua
Page 7 out of 8
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 tdcentre@nung.edu.ua, www.nung.edu.ua
Page 8 out of 8
Approximate time-table of IWCF courses
in 2016
Level of
certification
Start date Examination date
2
3 – 4 11.01.2016 22.01.2016
2 07.03.2016 11.03.2016
3 – 4 14.03.2016 25.032016
2 04.04.2016 08.04.2016
3 – 4 11.04.2016 22.04.2016
2 09.05.2016 13.05.2016
3 – 4 16.05.2016 27.05.2016
2 06.06.2016 10.06.2016
3 – 4 13.06.2016 24.06.2016
2 04.07.2016 08.07.2016
3 – 4 11.07.2016 22.07.2016
2 05.09.2016 09.09.2016
3 – 4 12.09.2016 23.09.2016
2 10.10.2016 14.10.2016
3 – 4 17.10.2016 28.10.2016
2 07.11.2016 11.11.2016
3 – 4 14.11.2016 25.11.2016
2 05.12.2016 09.12.2016
3 – 4 12.12.2016 23.12.2016
top related