torque multiplier catalog mc 14_0
Post on 10-Jan-2016
234 Views
Preview:
DESCRIPTION
TRANSCRIPT
-
Torque Multiplier
CATALOG
ChrisMTypewritten Textversion 1.0
-
Introduction
01.1
Torque Multipliers increase speed andproductivity, as it is faster than a hydraulicwrench and is less expensive. Designedto deliver smooth torque control, with continuous rotation, these torquemultipliers eliminate the cumbersome setup time and slow ratcheting process ofhydraulic wrenches.
Mountz Torque Multipliers vs.Impact Wrenches -Impact wrenches are destructive by naturewith its hammering design. Thesetools are not ergonomically friendly toan operator and require a highmaintenance budget. Mountz torquemultipliers are ergonomically safer thanthe harmful hammering of impactwrenches and eliminates frequently costlyrepairs of impact wrenches.
In nearly every heavy industrial application,turning threaded fasteners, nuts and boltsis generally viewed by two criteria:(1) The need to fasten tightly enough toprevent movement of parts and achievea good seal without exceeding thefastener s elasticity level.(2) Successful removal of fasteners afterlong periods of environmental exposureto harsh conditions.
Selecting the right heavy torque tool forthe job is crucial. When it comes toturning nuts and bolts, especially stubborncorroded ones, what could be more basicthan power?
You need controlled power. That is, controlled torque, which providessmooth torque, with continuous rotation.Otherwise, you could outdo yourself andstrip threads, break bolt heads or evencause personal injury.
MultipliersTechnicians are finding that the bestsolution for applying high torque todayis with a complete range of torque controlproducts, including manual and poweredtorque wrenches and torque multipliers.Mountz torque multipliers provideprecision torque control, making iteasier and often safer to assemble andservice-threaded fasteners whilereducing application problems andtool costs.
Mountz Torque Multipliers vs.Hydraulics Wrenches -Hydraulic wrenches are notorious for theirheavy ratchets, bulky compressors andlaborious operation. Hydraulic toolsoperate through a hydraulic ram thatextends and retracts, ratcheting the head.This is a long and tedious process thatrequires the operator to activate and standby the pump with a hand-held controller.
Mountz Eliminator Torque Multipliers
are available in hand, pneumatic and
electric models. These tools are the
ideal solution for true torque control,
speed, power, physical ease, silence
and safety.
Torque
-
01.2Introduction
HAND MULTIPLIERSThese torque multipliers are the idealtools for applications where air andelectricity aren t easily accessible.The gearing design allows for a hightorque output with minimal input.Commonly used in petrochemical,power generation, transportation,shipping and maintenance industries.Page 01.9 - 01.11
PNEUMATIC MULTIPLIERSDesigned for precision tightening andloosening of all heavy duty fasteningconnections the pneumatic multipliersare non-impacting and operate at asmooth, continuous rotation. Thetorque control is obtained with theuse of an air pressure regulator andthe tool will shut off once torque isachieved.Page 01.7, 01.8, 01.12
ELECTRIC MULTIPLIERSElectric multipliers increase speedand productivity. With a brushlessmotor design these tools are lowmaintenance and feature a universalAC Input (100-253V / 45-66 Hz).The speed, frequency and torque arecorrespondingly regulated andcontrolled with a built-in controller.The electric multipliers are non-impacting and operate at a smooth,continuous rotation.Page 01.4 - 01.6
ISO 9001and ISO 17025 Company
-
TORQUE CHART
01.3
Torque ChartEliminator CLD & CLS
ELIMINATOR CLD
1000
RU
NN
ING
AIR
PR
ESSU
RE -
PSI
2000 3000 4000 5000 60000
10
20
30
40
50
60
70
80
90
100
TORQUE - lbf.ft
ELIMINATOR CLS
1000
RU
NN
ING
AIR
PR
ESSU
RE -
PSI
2000 3000 4000 5000 60000
10
20
30
40
50
60
70
80
90
100
TORQUE - lbf.ft
GEAR 2 GEAR 1
PHYSICAL EASEVibration-free operationprevents operator fatigue.
NOISEOnly 81 decibels at three feet(one meter).
SAFETYSmooth continuous operation issafer than the vibration andhammering of typical impactwrenches.
TORQUE CONTROLTorque control is obtained with theuse of an air pressure regulator.Exhaustive tests have shown thattorque multipliers will stall outconsistently to within 5% of thesame torque figure at a given constantair pressure.
NOTE!All curves are approximatevalues. Many factors such asdifferences in compressed airsupplies, joint characteristics,and other application relatedvariables can cause deviationsfrom reported torque output.
800.456.1828
-
210300
210301
210302
210303
210304
210305
210307
210308
210310
210311
EFCip
01.4
Torque Multipliers
EFCipElectric Torque Multiplier
(with built-in controller)
Item #
70 - 400
80 - 600
150 - 1000
250 - 1500
300 - 1800
450 - 2500
600 - 3500
800 - 4200
1000 - 5000
1300 - 6300
Torque RangesN.m
52 - 295
59 - 442
111 - 727
185 - 1106
221 - 1327
332 - 1843
443 - 2581
590 - 3097
738 - 3688
959 - 4646
lbf.ft
EFCip10
EFCip20
EFCip30
EFCip40
EFCip50
EFCip60
EFCip70
EFCip80
EFCip90
EFCip100
Model
EFCip10
EFCip20
EFCip30
EFCip40
EFCip50
EFCip60
EFCip70
EFCip80
EFCip90
EFCip100
3/4"3/4"3/4"1"1"1"
1 1/2"1 1/2"1 1/2"1 1/2"
SquareDrive
85
85
85
85
85
98
98
123
123
123
SplineDia. mm
13
13
13
15
15
15.3
16
16
16.9
16.9
D2mm in.
41
41
41
54
54
54
72
72
72
72
330
330
330
382
382
388
406
406
428
436
mmLength
Model
19.8
19.8
19.8
22
22
24.2
29.1
29.1
38.6
40.8
Weightlbs.
76
38
24
15
13
12
9
7
6
4
SpeedRPM
DIMENSIONS and WEIGHT
STANDARD
Precision tightening and loosening of all heavy duty fastening connections.
Shuts-off when pre-set torque is achieved. Non-impacting and operates at a smooth,continuous rotation.
Increases speed and productivity, 5-10 times faster than slow ratcheting hydraulicwrenches. Less expensive than hydraulic wrenches.
Ergonomically safer than the harmful hammering of impact wrenches.Eliminates frequent and costly repairs of impact wrenches.
Standard models feature LED Display or Plus models feature LC Display.
Microprocessor controlled. The speed, frequency and torque correspondwith built-in controller (no separate box needed).
Brushless motor design provides low maintenance.
Over-heat protection.
Universal AC Input (100-253V / 45-66 Hz).
Feature LED Display:Preset torque with 19stages as well asadjustable torquedirection.
STANDARD MODELS
Feature LC Display:Preset torque & rotation angle canbe set and displayed as well asadjustable torque direction.
PLUS MODELS
KEY FEATURES
Torque Setting
Torque Setting
Controls for Settings
Rotation Angle Setting
Controls for Settings
Right/Left Indicator
Torque Multipliers are part of ourRental Program. Ask a customer servicerepresentative about availability.
RENTAL!
Accuracy better than 5%.
The handle can free float or locks in set position.
ISO 9001and ISO 17025 Company
Protected against dampness and spattered water, IP54 protection.
210312
210313
210314
210316
210315
210661
210318
210319
210320
210662
Item #
70 - 400
80 - 600
150 - 1000
250 - 1500
300 - 1800
450 - 2500
600 - 3500
800 - 4200
1000 - 5000
1300 - 6300
Torque RangesN.m
52 - 295
59 - 442
111 - 727
185 - 1106
221 - 1327
332 - 1843
443 - 2581
590 - 3097
738 - 3688
959 - 4646
lbf.ft
EFCip10 Plus
EFCip20 Plus
EFCip30 Plus
EFCip40 Plus
EFCip50 Plus
EFCip60 Plus
EFCip70 Plus
EFCip80 Plus
EFCip90 Plus
EFCip100 Plus
Model
76
38
24
15
13
12
9
7
6
4
SpeedRPM
PLUS
Length
218 mm
90 mm
SplineD2
217mm
173mm
-
EF / EFW
01.5
TorqueMultipliers
Accuracy better than 5%.
Precision tightening and loosening of all heavy duty fastening connections.
Shuts-off when pre-set torque is achieved. Non-impacting and operates at asmooth, continuous rotation.
KEY FEATURES
Increases speed and productivity, 5-10 times faster than slow ratchetinghydraulic wrenches. Less expensive than hydraulic wrenches.
Ergonomically safer than the harmful hammering of impact wrenches.Eliminates frequent and costly repairs of impact wrenches.
Standard models feature LED Display or Plus models feature LC Display.
6 PT. IMPACT SOCKETSA wide range of durablesockets available.See Page 01.14
Accessories
Accessories
Microprocessor controlled. The speed, frequency and torque correspondwith built-in controller (no separate box needed).
Brushless motor design provides low maintenance.
Over-heat protection.
Universal AC Input (100-253V / 45-66 Hz).
The handle can free float or locks in set position.
RETENTION RING
See Page 01.13
Used to hold a reaction foot,bar or ring on the Multiplier.
800.456.1828
-
Feature LED Display:Preset torque with 19stages as well asadjustable torquedirection.
EF / EFW
01.6
EF & EFWElectric Torque Multipliers (with built-in controller)
Right AngleMultiplier
160 - 1080
300 - 2100
435 - 2695
500 - 3100
900 - 4250
1100 - 6150
1800 - 7800
2050 - 9800
118 - 796
221 - 1548
320 - 1987
368 - 2286
663 - 3134
811 - 4536
1327 - 5752
1512 - 7228
EF100
EF200
EF250
EF300
EF400
EF600
EF800
EF1000
210604
210605
210606
210607
210608
210609
210610
210611
Item # N.mlbf.ftModelTorque Ranges
30
30
30
30
35
44
52.5
64
Weightlbs.
33
16
14
12
8
7
4
3
SpeedRPM
STANDARD
210624
210625
210626
210627
210628
210629
210630
210631
Item #
PLUS
EF100Plus
EF200Plus
EF250Plus
EF300Plus
EF400Plus
EF600Plus
EF800Plus
EF1000Plus
Model
STANDARD MODELS
EF100
EF200
EF250
EF300
EF400
EF600
EF800
EF1000
DIMENSIONS and WEIGHT
1"1"1"1"1 1/2"1 1/2"1 1/2"1 1/2"
SquareDrive
85
85
85
98
98
123
148
173
SplineDia. mm
20.2
20.2
20.2
20.2
20.6
21.6
21.8
21.8
D2mm in.
54
54
54
72
72
72
72
91
515
515
515
515
525
550
555
555
mmLength
EFW100
EFW200
EFW250
EFW300
EFW400
EFW600
EFW800
EFW1000
210614
210615
210616
210617
210618
210619
210620
210621
Item #Model
STANDARD
210634
210635
210636
210637
210638
210639
210640
210641
Item #
PLUS
EFW100Plus
EFW200Plus
EFW250Plus
EFW300Plus
EFW400Plus
EFW600Plus
EFW800Plus
EFW1000Plus
Model
Feature LC Display:Preset torque & rotationangle can be set anddisplayed as well asadjustable torque direction.
In-LineMultiplier
PLUS MODELS
Model
EFW100
EFW200
EFW250
EFW300
EFW400
EFW600
EFW800
EFW1000
3/4"1"1"1"1 1/2"1 1/2"1 1/2"1 1/2"
SquareDrive
85
85
85
98
98
123
148
173
SplineDia. mm
11.2
11.2
11.2
12
12.5
13.7
13.7
15
D2mm in.
54
54
54
72
72
72
72
91
285
285
285
305
320
350
350
380
mmHeight
Model
28.5
28.5
28.5
31
32
42
48.5
59.5
Weightlbs.
EF EFW
EF Series
EFW Series
EFW Series
EF Series
NOTE!Remote Controloperation available. SeeAccessories page 01.13
All Weather modelsavailable.
Torque Setting
Rotation Angle Setting
Torque Multipliers arepart of our RentalProgram. Ask acustomer servicerepresentative aboutavailability.
RENTAL!
Operation Buttons:CW Direction,Start/Stop, andCCW Direction
On/Off
Controls for Settings
Right/Left Indicator
LengthSpline D2
Height
346 mm
Spline
D2
105 mm
104mm
60 mm
60 mm
LEGENDA
B
C
D
E
F
F
A
A
BD
B C
E
F
E
-
CLD
01.7 800.456.1828
Torque Multipliers
CLDPneumatic Torque Multiplier (Rotating Body Tool)
165 - 485
305 - 895
305 - 895
365 - 1080
450 - 1315
590 - 1730
910 - 2670
1180 - 3460
1490 - 4380
2080 - 6115
2610 - 7675
3810 - 11195
ConnectWith A:
LCU-2Our Lubro-Control Unit is designedto provide a controlled supply offiltered, regulated and lubricatedcompressed air to the Multiplier.See Page 01.13
Torque RangesItem # N.m
121 - 357
225 - 660
225 - 660
270 - 796
332 - 970
435 - 1275
671 - 1970
870 - 2552
1100 - 3230
1534 - 4510
1925 - 5660
2810 - 8257
lbf.ft
CLD55
CLD85
CLD85
CLD105
CLD125
CLD155
CLD225
CLD280
CLD380
CLD580
CLD780
CLD980
Model
210572
210573
210574
210575
210576
210577
210571
210578
210579
210580
210581
210582
Accuracy better than 5%.
Compact design is safe, easy, and simple tohandle.
Precision tightening and loosening of all heavyduty fastening connections.
Flexible tool positioning with 360 rotating handle.
KEY FEATURES
Accessories
Shuts-off when pre-set torque is achieved.Non-impacting and operates at a smooth,continuous rotation.
Torque adjustment and control is regulated by theLubro Control Unit (LCU) via the air supply.
Multiplier increases speed and productivity, as itis faster than a hydraulic wrench and is lessexpensive. Eliminates the cumbersome set uptime and slow ratcheting process of hydraulicwrenches.
Ergonomically safer than the harmful hammeringof impact wrenches. Eliminates the frequentcostly repairs of impact wrenches.
Heavy-duty gearbox.
CLD55
CLD85
CLD85
CLD105
CLD125
CLD155
CLD225
CLD280
CLD380
CLD580
CLD780
CLD980
48
25
25
15
12
10
8
6.5
4
2.5
1
0.5
SpeedRPM
85
85
85
85
85
85
85
85
98
123
148
173
SplineDia. mm
11
11.8
11.8
11.8
11.8
11.8
11.8
11.8
12.6
13.8
13.8
14.6
D2mm in.
41
41
54
54
54
54
54
54
72
72
72
91
280
300
300
300
300
300
300
300
320
350
350
370
mmLength
Model
15
18
18
18
18
18
20
20
26
35
42
55
Weightlbs.
3/4"3/4"1"1"1"1"1"1"1 1/2"1 1/2"1 1/2"1 1/2"
SquareDrive
6 PT. IMPACT SOCKETSA wide range of durablesockets available.See Page 01.14
REACTION RINGReaction Devices:Foot, Bar and Ring.See Page 01.13
SplineDiameter
LengthD2
210 mm
CLD
NOTE!All Pneumatic Multipliers should use ahigh quality air filter regulator.
Torque Multipliers are part of ourRental Program. Ask a customer servicerepresentative about availability.
RENTAL!
Mountz MC14 catalog Copyright 2008 all rights reserved
-
CLS
01.8
60 - 220
60 - 220
95 - 280
95 - 280
135 - 390
165 - 485
305 - 895
365 - 1080
495 - 1450
645 - 1900
910 - 2670
1180 - 3460
1600 - 17000
Torque RangesItem # N.m
44 - 162
44 - 162
70 - 206
70 - 206
99 - 287
121 - 357
225 - 660
269 - 796
365 - 1069
475 - 1401
671 - 1969
870 - 2551
1180 - 12540
lbf.ft
CLS15
CLS15
CLS25
CLS25
CLS35
CLS45
CLS75
CLS95
CLS135
CLS175
CLS255
CLS315
CLS1700*
Model
213030
213031
213032
213033
213034
213035
213036
213037
213038
213039
213040
213041
213021
CLS15
CLS15
CLS25
CLS25
CLS35
CLS45
CLS75
CLS95
CLS135
CLS175
CLS255
CLS315
CLS1700*
1/2"3/4"1/2"3/4"3/4"3/4"3/4"3/4"1"1"1"1"2 1/2"
SquareDrive
85
85
85
85
85
85
85
85
85
85
85
85
275
SplineDia. mm
10
10
10
10
10
10
10.9
10.9
11.8
11.8
13
13
22.4
D2mm in.
41
41
41
41
41
41
41
41
54
54
54
54
*
255
255
255
255
255
255
277
277
300
300
330
330
570
mmLength
Model
13.2
13.2
14.3
14.3
14.3
14.3
16.5
16.5
17.6
17.6
19.8
19.8
132
Weightlbs.
60
60
38
38
34
27
19
13
9
7
6
4
1
SpeedRPM
SINGLE SPEED
CLS2/100
CLS2/100
CLS2/150
CLS2/300
CLS2/400
CLS2/600
CLS2/800
CLS2/1000
CLS2/4800
3/4"1"1"1"1 1/2"1 1/2"1 1/2"1 1/2"2 1/2"
SquareDrive
85
85
85
85
98
123
148
173
275
SplineDia.mm
13
13
13
14.2
15
16.1
16.1
16.9
22.4
D2mm in.
41
54
54
54
72
72
72
91
*
330
330
330
360
380
410
410
430
570
mmLength
Model
15
15
16
20
24
33
44
53
132
Weightlbs.
120 - 1125
120 - 1125
170 - 1615
385 - 3595
540 - 5055
840 - 7865
1010 - 9435
1175 - 11010
4700 - 48600
Torque RangesItem # N.m
88 - 830
88 - 830
125 - 1191
284 - 2651
398 - 3728
620 - 5800
745 - 6960
866 - 8120
3466 - 35845
lbf.ft
CLS2/100
CLS2/100
CLS2/150
CLS2/300
CLS2/400
CLS2/600
CLS2/800
CLS2/1000
CLS2/4800*
Model
213001
213002
213014
213003
213004
213006
213008
213010
213005
12
12
7
5
3
2
1.5
1
0.3
Speed RPM
TWO SPEED
Low High
36
36
21
15
9
6
5
4
0.6
* Supplied with Reaction Ring
CLSPneumatic Torque Multipliers(Fixed Body Tool)
Torque Mulitipliers
Accuracy better than 5%.
Compact design is safe, easy, and simple to handle.
Precision tightening and loosening of all heavy duty fastening connections.
Two Options; Single Speed models are high speed with low torque range,and Two Speed models feature manual two-speed gearbox for controlledscrew tightening with high torque range.
Shuts-off when pre-set torque is achieved. Non-impacting and operatesat a smooth, continuous rotation.
Torque adjustment and control is regulated by the Lubro Control Unit(LCU) via the air supply.
Multiplier increases speed and productivity, as it is faster than ahydraulic wrench and is less expensive. Eliminates the cumbersome setup time and slow ratcheting process of hydraulic wrenches.
Ergonomically safer than the harmful hammering of impact wrenches.Eliminates the frequent costly repairs of impact wrenches.
Heavy-duty gearbox.
LCU-2Our Lubro-Control Unit isdesigned to provide acontrolled supply offiltered, regulated andlubricated compressed airto the Multiplier.
REACTION BARReaction Devices:Foot, Bar and Ring.
See Page 01.13Accessories
The CLS is part of our Rental Program. Ask a customerservice representative about availability.
RENTAL!
NOTE!All models supplied withReaction Foot, except *.
All Pneumatic Multipliers shoulduse a high quality air filter regulator.
SplineDiameter
LengthD2
210 mm
D2
SplineDiameter
Length
210 mm
* Supplied with Reaction Ring
ISO 9001and ISO 17025 Company
-
Model
MTM
01.9 800.456.1828
Torque Multipliers
231
758
Maximum Torque
Item # N.m
170
559
lbf.ft
MTM-15
MTM-27
Model
215026
215027
Accuracy better than 5%.
Precision tightening for heavy duty fastening connections.
Commonly used in construction, heavy equipment & power generation industries.
Portable, compact and lightweight.
KEY FEATURES
Constructed with quality steel and matted finish.
Torque Multiplication Ratio - low energy input with high torque output.
For operation in combination with a torque wrench.
Ideal for remote locations where no source of power is available.
Includes plastic case.
1105
2000
1500
2700
1/2"
3/4"
InputN.mlbf.ft
Output
MTM
MTM-15
MTM-27
Female InputSquare Drive
ModelWeightlbs.
Lengthmmin.
6 1/3" 97
111
5.73 7/8"MTM-14
MTM-27
3/4"
1"
Male OutputSquare Drive
6.5:1
3.3:1
TorqueMultiplicationRatio
Heightmmin.
MTM-15 Case SetMultiplierReaction Bar (L = 380mm)Reaction 90 BaseReaction 90 BarBreakaway Adapter
Hand Multiplier
HEAD DIMENSIONS and WEIGHT
MTM-27 Case SetMultiplierReaction Bar (L = 380mm)Reaction 90 BaseReaction 90 Bar
1/2"
3/4"
7 1/2"
160
190 4 1/3" 7.5
-
HG
01.10
HGHand Multiplier
1400
1400
1400
1400
3500
5000
6000
8000
11500
50000
Torque OutputItem # N.m
1033
1033
1033
1033
2581
3687
4425
5900
8480
36880
lbf.ft
H-10*
H-15*
HG-10
HG-15
HG-20
HG-30
HG-40
HG-50
HG-60
HG-80**
Model
213700
213701
213702
213703
213704
213705
213706
213707
213708
213709
Accessories
H-10*
H-15*
HG-10
HG-15
HG-20
HG-30
HG-40
HG-50
HG-60
HG-80
DRIVE SIZE,DIMENSIONS and WEIGHT
Square Drive
85
85
85
85
85
98
123
148
173
275
SplineDia. mm
7
7.9
7
7.9
9.3
9.8
11
11
11.4
14.2
D2mm in.
41
41
54
54
54
72
72
72
91
*
180
200
180
200
235
250
280
280
290
360
mmLength
Model
8
8.8
8
8.8
13.3
15.6
33
35.3
61.8
128
Weightlbs.
3.5:1
3.5:1
3.5:1
3.5:1
11.5:1
14.3:1
16:1
20.5:1
23.2:1
126:1
TorqueMultiplicationRatio
6 PT. IMPACT SOCKETSA wide range of durablesockets available.See Page 01.14
RETENTION RINGHolds a reaction foot, baror ring on the Multiplier.See Page 01.13
Accuracy better than 5%.
For operation in combination with a torquewrench.
Precision tightening and loosening of all heavyduty fastening connections.
Torque Multiplication Ratio - low energy inputwith high torque output.
KEY FEATURES
Compact design allows for operation inspace-restricted applications.
Ideal tool for applications where air and electricityaren t easily accessible.
Most models furnished with anti-windup ratchetsallowing jobs to be performed easily, efficientlyand safely.
Shear pin at input drive protects gearbox in caseof torque overload.
Constructed with quality steel.
Each tool contains extra sheer pins and torquemultiplication selection chart.
**Not fitted with Anti-Windup.
*Weights do not include reaction device.
Male Output
3/4"1"3/4"1"1"1 1/2"1 1/2"1 1/2"1 1/2"2 1/2"
MaximumHG
RATCHET END
Female Input3/4" Square Drive(all models)
4
4
4
4
16
18
21
24
28
180
GearRatio
Torque Multipliers are part of ourRental Program. Ask a customer servicerepresentative about availability.
RENTAL!
SplineDiameter
L
D2
**All models supplied with Reaction Foot,**except HG-80 supplied with Reaction Ring.
ISO 9001and ISO 17025 Company
-
PTT - Bolt Audit ModelSold SeparatelyItem #072995
HSD
01.11
Torque Multipliers
HSDHand Multiplier - Sensor Controlled
50 - 500
100 - 1000
200 - 2000
300 - 3000
400 - 4000
600 - 6000
800 - 8000
1000 - 10000
2250 - 22500
Torque RangesItem # N.m
37 - 368
74 - 737
148 - 1475
222 - 2212
295 - 2950
443 - 4425
590 - 5900
737 - 7375
1660 - 16595
lbf.ft
HSD 50
HSD 100
HSD 200
HSD 300
HSD 400
HSD 600
HSD 800
HSD 1000
HSD 2250
Model
213946
213947
213948
213949
213942
213950
213952
213953
213951
HSDHand MultiplierSensor Controlled
HSD 50
HSD 100
HSD 200
HSD 300
HSD 400
HSD 600
HSD 800
HSD 1000
HSD 2250
DIMENSIONS and WEIGHT
Male OutputSquare Drive
85
85
85
98
98
123
148
173
275
SplineDia.mm
8.7
8.7
11.6
12.5
12.5
16.9
16.9
17.3
20
D2mm in.
41
54
54
72
72
72
72
91
*
220
220
295
320
320
430
430
440
510
mmLength
Model
12.3
16.5
17.6
22
23.1
41.8
44
70.5
137
Weightlbs.**
**Weights do not include reaction device.
3/4"1"1"1"1 1/2"1 1/2"1 1/2"1 1/2"2 1/2"
Accuracy better than 1%.
For operation in combination with a torque wrench.
Precision tightening and loosening of all heavy dutyfastening connections.
Low energy input with high torque output.
KEY FEATURES
Hand Multiplier with built-in transducer.
Export data to a PC for documentation control with PTT.
Using the PTT-2000 Bolt Audit Model with HSD, thesystem is designed for auditing a fastener for a test such asdetermining relaxation after a fastener has been tightened.The purpose of the bolt audit function is to report thedegree of movement from the initial torque threshold to thefinal torque threshold. The PTT will display the finaltorque threshold and the total angle displacement, whichhas occurred from the initial torque threshold and finaltorque threshold.
Torque and Angle can be monitored or pre-set using the PTTinconjunction with the transducerized multiplier.
Female Input3/4" Square Drive(all models)
Manual Sensor-Tool JointPTT
Data Export:PC Output,Documentation
Torque-ControlledMeasurement
*All models supplied with Reaction Foot, except HSD 2250 supplied with Reaction Ring.
Spline Diameter
L
D2
The HSD is part of our Rental Program. Ask acustomer service representative about availability.
RENTAL!
-
RG
01.12
590 - 4235
630 - 4535
670 - 4840
Torque RangesItem # N.m
435 - 3123
465 - 3344
494 - 3569
lbf.ft
RCL-36P
RCL-46P
RCL-80P
Model
210038
210040
210182
RCL-36P
RCL-46P
RCL-80P
DIMENSIONS and WEIGHT
36
46
80
HexDrivemm
Length
15.7
17.1
17.7
Model
27.5
30.8
46.3
Wt.lbs.
PNEUMATIC
560 - 3780
560 - 3780
560 - 3780
560 - 3780
560 - 3780
560 - 3780
Torque RangesItem # N.m
413 - 2787
413 - 2787
413 - 2787
413 - 2787
413 - 2787
413 - 2787
lbf.ft
EFC-R 36P
EFC-R 46P
EFC-R 80P
EF-R 36P
EF-R 46P
EF-R 80P
Model
210184
210185
210186
210187
210188
210189
2
2
2
13
12
11
ELECTRIC SpeedRPM
RGPneumatic & Electric RadialTorque Multipliers
Torque Mulitipliers
Accuracy better than 5%.
Compact design is safe, easy, and simple to handle.
Low profile radial head allows access where clearance is limited.
Specially designed for heat plate exchanger applications.
Continuously rotating hex drive is faster than hydraulics and morereliable than impacting tools.
Torque reaction is absorbed by means of a reaction stud.
Hex drive size reduces or enlarges with drop in hex adapters.
Electric models - Universal AC Input (100-253V / 45-66 Hz) andfeatures LED display (see page 05.4).
RG Multipliers are part of our Rental Program.Ask a customer service representative aboutavailability.
RENTAL!
NOTE!All Pneumatic Multipliers should usea high quality air filter regulator.
(Radial Gearing)
1
1
2
LowSpeed RPM
High
3
3
6
Width
6.4
7.4
9.1
56
73
85
Radiusmm
Stud Bolts
-
-
160
EFC-R 36P
EFC-R 46P
EFC-R 80P
EF-R 36P
EF-R 46P
EF-R 80P
DIMENSIONS and WEIGHT
36
46
80
36
46
80
15.2
16.7
18.7
19.6
21.6
23.6
Model
26.3
33
48.5
36.3
41.8
57.3
163
188
230
163
188
230
56
73
85
56
73
85
100
112
130
100
112
130
Pneumatic ModelsConnect With A:
LCU-2Provides a controlled
supply of filtered, regulatedand lubricated compressed
air to the Multiplier.
See Page 01.13
R
L
W
A2
A1
A1
W
L
RCL-36PRCL-46P
RCL-80P
R
R
L
W
A2
A1
A1
W
L
EFC-R 36PEFC-R 46P
EFC-R 80P
R
W
A1
L
EF-R 36PEF-R 46P
R
LA2
A1
W
EF-R 80P
R
HEX ADAPTERSSold Separately.Stock sizes listed.Custom sizes available.
1 7/16"216030
36
StandardHex Drive in.
46 80
1 13/16"216046
1 1/16"216027
1 5/8"216031
2"216047
1 1/8"216028
2 3/16"216048
1 1/4"216029
2 3/8"216049
3 31/32"216026
2 9/16"216050
2 3/4"216051
36mm216004
36
MetricHex Drive mm
46 80
46mm216020
24mm216000
41mm216005
50mm216021
27mm216001
55mm216022
30mm216002
60mm216023
32mm216003
65mm216024
70mm216025
A2mmin. mmin. mm
400
435
450
163
188
230
100
112
130
A1mm
HexDr.mm
Length Wt.lbs.
Width Radiusmm
Stud BoltsA2mmin. mmin. mm
A1mm
385
425
475
500
550
600
6.4
7.4
9.1
6.4
7.4
9.1
-
-
160
-
-
160
-
Torque Multipliers
Accessories
01.13
Accessories
This unit is designed to provide acontrolled supply of filtered,regulated and lubricatedcompressed air to the tool. Theunit is supplied with a 10 foothose and one 1/2" NPTconnector and 300 PSI Rating.For tools rated at 40 SCFW.
LCUModel: LCU-2Pipe Size: 1/2" NPTFRL Out Max PSIG: 200FRL In Max PSI: 200Weight (approx): 7 lbs.Output: 1/2" Fem SwivelInput: 1/2" NPT maleItem #061429
REACTION DEVICESTo select a device, reference the Multipliers Spline Diameter and D2 sizes as listed in the specification charts.
Allows Torque Multipliers to be used inconfined spaces. Fits over nose in place ofnormal reaction device. Special orders available.
NOSE EXTENSIONS
SplineDia. mm
Model(Length) Item #
41
41
41
41
54
54
54
54
72
72
72
72
91
91
91
91
3/4"3/4"3/4"3/4"1"1"1"1"1 1/2"1 1/2"1 1/2"1 1/2"1 1/2"1 1/2"1 1/2"1 1/2"
Square Drive
064250
064251
064253
064254
064255
064256
064257
064258
064259
064260
064261
064262
064263
064264
064265
064266
NE - 6"NE - 9"NE - 12"NE - 18"NE - 6"NE - 9"NE - 12"NE - 18"NE - 6"NE - 9"NE - 12"NE - 18"NE - 6"NE - 9"NE - 12"NE - 18
TRIGGER LOCK for CLD, CLS, RCLOperate hands free, forwardand reverse. (not pictured)Item# 210590
Hand or FootRemote Control LCU
REMOTE CONTROLOperate with full control from a safe distance.Illustration shows dual tool operation (used in tandem).
Item #
Hand
Hand
Hand
Model
210274
210275
210276
Remote Control Operation
Single Tool
Dual Tool
Four Tool
FBE
FBE 2
FBE 4
ELECTRIC
Item #
Hand
Hand
Foot
Model
210593
210596
210273
Remote Control Operation
Single Tool
Dual Tool
Dual Tool
FBL
FBL 2
FBL 2
PNEUMATIC
130
130
150
220
220
220
220
Dimensions mmItem #Y
110
110
115
156
170
170
174
X
41
54
54
72
72
72
91
SplineDia. mm
213893
218077
213916*
213892
213891
218074
213890
85
85
85
98
123
148
173
D2
240
240
240
240
240
240
Dimensions mmItem #Y
65
80
105
105
105
105
X
41
54
72
72
72
91
SplineDia. mm
213903
213905
213899
213900
213898
213897
85
85
98
123
148
173
D2
REACTION BAR
28
28
33
47
47
52
180
Dimensions mmItem #Y
65
80
110
110
110
130
57
X
41
54
72
72
72
91
**
SplineDia. mm
213896
213917
213889
213904
213895
213894
213943
85
85
98
123
148
173
275
D2
REACTIONRINGREACTION
FOOTX
YY
YX
X
*Suggested for use above 2000 N.m **For CLS1700, CLS2/4800, EF2000, EF4000, EFW2000, EFW4000, HG80, HSD2250
RETENTION RINGHolds a reaction foot,bar or ring on the Multiplier.
Item #
41
54
72
91
Spline Dia. mm
21-10271
21-10273
21-10275
21-10277
Connect the Power Gear to a torquemultiplier and increase output.
POWER GEARModel: G45Gear Ratio: 45:1Torque Multiplication Ratio:38~40:1 (variable due to friction)Weight: 132 lbs. (60kg)Item #210269
Works with:
CLS2/100
CLS45
EF100
Increase Max. Torque
33190 lbf.ft / 45000 N.m
12540 lbf.ft / 17000 N.m
33190 lbf.ft / 45000 N.m
275mm
400 mm (15 3/4")
Handle
InputDrive
2 1/2" Square Drive
3/4"
1"
NOTE!2-1/2" Dia. Gage: (0-160 PSI with 5PSI graduation) Liquid Filled
-
EF-SERIESINLINE MULTIPLIER
with built-in controllerPage 01.5 & 01.6
For use with Torque Multipliers
6 PT. IMPACTSOCKETS
01.14
6 Pt. Impact Sockets
2 3/8
2 1/2
2 9/16
2 5/8
2 3/4
2 7/8
3
3 1/8
3 3/16
3 1/4
3 3/8
3 7/16
3 1/2
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
3.386
272466
270818
270865
271711
272444
271712
272448
272445
271713
272446
271714
271715
271716
3.622
3.937
3.937
3.937
4.134
4.291
4.528
4.528
4.764
4.764
5.000
5.000
5.118
3.740
3.740
3.740
3.937
3.937
4.134
4.331
4.331
4.724
4.724
4.724
4.724
4.724
1.378
1.378
1.378
1.496
1.496
1.614
1.732
1.770
1.850
1.850
1.930
1.930
1.930
2.115
2.115
2.115
2.312
2.312
2.509
2.706
2.706
3.099
3.099
3.099
3.099
3.099
D2Item #Size D1 L T CDimensions in.
2
2 1/16
2 1/8
2 1/4
2 3/8
2 7/16
2 1/2
2 9/16
2 5/8
2 3/4
2 7/8
3
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
2.126
3.386
3.386
3.386
271614
271668
271708
271636
271709
271639
271640
271641
271642
271644
271710
271717
D2
2.874
3.071
3.228
3.228
3.386
3.622
3.622
3.622
3.622
3.780
3.937
4.134
Item #Size
2.756
2.953
2.953
3.071
3.543
3.543
3.543
3.543
3.661
3.740
3.740
3.780
1.062
1.181
1.181
1.299
1.378
1.378
1.378
1.378
1.496
1.496
1.614
1.732
1.631
1.828
1.828
1.946
2.418
2.418
2.418
2.458
2.536
2.615
2.615
2.655
D1 L T CDimensions in.
1" SQUARE DRIVE 1 1/2" SQUARE DRIVE
1
1 1/16
1 1/8
1 1/4
1 3/8
1 7/16
1 1/2
1 9/16
1 5/8
1 3/4
2
1.732
1.732
1.732
1.732
1.732
1.732
1.732
1.732
1.732
1.732
2.126
271686
271221
271631
271220
271632
271223
271633
271634
271225
271635
271232
D2
1.614
1.732
1.732
1.929
2.047
2.047
2.126
2.244
2.244
2.480
2.874
Item #Size
1.890
2.047
2.047
2.047
2.165
2.205
2.283
2.283
2.283
2.480
2.598
0.512
0.512
0.650
0.650
0.748
0.748
0.866
0.866
0.866
0.995
1.062
0.890
1.047
1.047
1.047
1.165
1.205
1.283
1.283
1.283
1.480
1.598
D1 L T CDimensions in.
3/4" SQUARE DRIVE
T
L
Size
D1
C
D2
HGHAND MULTIPLIER
Ideal tool where air andelectricity aren t easilyaccessible.Page 01.10
ISO 9001and ISO 17025 Company
-
TORQUE ANALYZER &TEST MEASUREMENTCATALOG - MC14Ask a Mountz customer service representativefor a copy of our Torque Analyzer &Test Measurement Catalog (24 page).(Available in Print or PDF format)Torque Analyzers and TransducersTest Measurement EquipmentMultiplexer & Bar Code ReaderAccessories
ASSEMBLY POWER TOOLCATALOG - MC14Ask a Mountz customer service representativefor a copy of our Assembly Power Tool Catalog (76 page).(Available in Print or PDF format only)Hand Torque ScrewdriversElectric Torque ScrewdriversTransformersTorque Screwdriver AccessoriesAdapters, Bits, Bit Holders, Setters, Sockets
CORPORATE HEADQUARTERS1080 North 11th StreetSan Jose CA 95112t 408.292.2214t 800.456.1828f 408.292.2733e-mail sales@etorque.comwww.etorque.com
DISTRIBUTION & SERVICE CENTER19051 Underwood RoadFoley AL 36535t 251.943.4125f 251.943.4979
US & CANADA SALES OFFICESAnaheim, Boston, Charlotte, Chicago, Cleveland,Dallas, El Paso, Los Angeles, Minneapolis, Nashville,Phoenix, Seattle, San Jose, Toronto
MAIN OFFICE & SERVICE CENTERAv. Cristobal Colon #15343Col. Paseos de ChihuahuaChihuahua, Chih. Mexico CP 31125t 614.481.0023f 614.481.0053
MOUNTZ MEXICO SA de CV
MEXICO SALES OFFICESTijuana, Cd. Juarez, Chihuaha, Reynosa, Monterrey,Mexico DF, Guadalajara
Mountz MC14 catalog Copyright 2008 all rights reserved
top related