threaded products gaskets & seals precision machining brochure... · assurance lab with cnc...
Post on 23-Jun-2020
4 Views
Preview:
TRANSCRIPT
Threaded Products | Gaskets & Seals | Precision Machining
FIRST CALL, ONLY CALL
Dan-Loc Group was formed with the merger of Texthread, Dan-Loc Bolt & Gasket, and Spensall. Dan-Loc Group
is a manufacturer and distributor of threaded products, gaskets & seals, and precision machined components.
Dan-Loc Group manufactures and distributes products that serve the global oil & gas industry as well as the
petrochemical, industrial, marine, power generation, agriculture and transportation industries. Dan-Loc Group
has facilities in the USA, UK, Singapore and Malaysia to serve our customers.
Dan-Loc Group has 189 years of combined manufacturing experience with each company recognized as a premier
supplier of the highest quality industrial threaded products. Today, Dan-Loc Group produces thousands of
standard and special tap end studs, double end studs, continuous thread studs and nuts.
Dan-Loc Group also manufactures and supplies a full line of API and ASME ring joint gaskets. A large volume of
common sizes and materials is in stock as well as raw material grades to produce non-standard gaskets. Products
include standard and specialty ring joint gaskets, spiral wound gaskets, non-metallic gaskets and specialty seals.
With an extensive inventory of raw materials and full-line machine shop capabilities, Dan-Loc Group is fully
capable and ready to produce any standard or special product requirements. We are equipped for heat treating
to ASTM requirements and can provide a variety of platings and coatings to meet industry standard or customer
design specifications.
Dan-Loc Group has the manufacturing capacity, facilities, quality control, personnel, and experience to meet
the needs of our customers and the industries they serve. Dan-Loc Group can meet our customers’ needs for
high quantity, long-run jobs as well as small lot, expedited, or rush orders. All Dan-Loc Group companies are
ISO 9001:2008 Registered.
• Global supply chain
• Single source for stud bolts
& ring gaskets
• Domestic manufacturing
& world class sourcing
• Complete traceability
• Friendly 40-lb packaging
• Listed on most end-user AMLs
• ISO 9001:2008 Registered
• API Spec Q1 Certified
• API 6A and 20E Monograms
• Six Sigma Green Belt Team
• In-house heat treatment
• In-house testing capabilities
• Convenient express locations
• In-depth industry knowledge
DAN-LOC EXPRESS FILLS YOUR
ORDERS FOR HARD-TO-FIND
SPECIALS AND STANDARDS. FAST.
If you need stud bolts quickly, you should know about
Dan-Loc Express. At our locations across the USA and
the UK we’re ready to fulfill your bolt orders quickly,
so you can get what you want when you need it.
At each location, we have a full range of widely used
fasteners ready for immediate shipment. We can also provide
studs made from exotic alloys – plus other unique products.
We offer fast turnaround on special orders, including
special length studs and custom configurations.
Our dedicated staff of fastener experts will make
sure your needs are quickly met from our
wide selection of material options
including: B7, B7M, L7, L7M,
B16, B8, B8M and exotic alloys.
We also offer a variety of platings
including zinc and cadmium, as
well as PTFE and Cermet coatings.
Call the Dan-Loc Express
nearest you for quick availability
of a wide range of bolts and gaskets.
Spiral Wound GasketsWith and without stainless steelinner rings
Fast service on custom sizes
THREADED PRODUCTS
Dan-Loc Group is an ISO 9001:2008 Registered manufacturer of allthread studs, tap end studs, and custom fasteners. Dan-Loc Group’scapabilities include cut threading, roll threading, and the use of barfeed lathes that can produce special reliefs, profiles and single pointthreads on parts up to six inches in diameter.
Dan-Loc Group is licensed to use the API Spec 20EMonogram BSL-1,BSL-2 and BSL-3 (License No. 20E-0022) for all sizes of roll threadedstuds and all sizes of fully machined bolts, screws and nuts.
Dan-Loc Group is a leading provider of API ring gaskets, spiralwound gaskets, non-metallic gaskets and precision machinedgaskets. Dan-Loc Group has large inventories of standard gasketson the shelf. Same day shipment available.
Dan-Loc Group is licensed to use the API Spec 6A Monogram(License No. 6A-1867) on all sizes and materials of manufacturedring joint gaskets
Specialty GasketsMachine shop dedicated to manufacturing special gaskets
Made to customer prints
All materials including inconel,titanium, and other exotics
StudsTap end Studs
Double end Studs
Combination Studs
Single end Studs
All Thread Studs
Anchor Bolts / Bonnet Bolts
Collars / Specials
NutsHex Nuts / Square Nuts
Slotted Nuts
Coupling Nuts / Jam Nuts
Cap Nuts / Specials
Spherical Nuts
High Profile or “Tall” Nuts
HeadedPartsHex Head
Socket Head Cap Screws
12-Point Cap Screws
Set Screws / Specials
MaterialsStocked bar in B7, L7, B16, andall stainless grades, 17-4, A286,and exotics such as inconel, monel,and hastelloy to make any typeof special threaded products
FinishingCoatingsWe are capable of supplying manytypes of coatings per your specifica-tions on a quick turn-around basis.
Some of the coatings available are:
cadmium / yellow chromate
inorganic zinc / various types of
PTFE and Cermet coatings
Heat TreatingWe have our own in-house
furnaces for heat treating and
modifying bolting components
to ASTM specifications.
TestingOn-site mechanical testing
laboratory for ASTM standards
compliance documented via
in-house generated MTRs
Yield, Tensile, Hardness, Charpy,
Proof Load, and CMM
PMI testing
GASKETS & SEALS
Ring Joint GasketsHuge inventory of standard API sizes
“R”, “RX”, and “BX” gaskets
Soft Iron, Steel, F5,304, and 316 materials
Turned Parts
Dan-Loc Group operates over 30 CNC lathes, many with live toolingto produce parts with close tolerances and can accommodate up to24.5 inches (620 mm) in diameter and 80 inches (2030 mm) in length.
Dan-Loc Group's machinists are experienced in manufacturingspecialty and complex parts for the energy industry.
Dan-Loc Group also has an in-house qualityassurance lab with CNC Coordinate Measuring
Machines to verify profiles and dimensions.
Dan-Loc Group specializes in the machining of complex parts for the global oil & gas industry. Dan-LocGroup’s machinists are highly experienced in machining a variety of materials with an emphasis on Inconel,Monel, Super Duplex, Heat & Creep resistant steels and other exotic materials as well as the more basic LowAlloy Steels and Corrosion Resistant Alloys. Parts can be produced from various sections such as flat bar,square bar, angled bar, hexagon bar and round bar up to 24.5 inches (620 mm) diameter in varying lengths.
PRECISION MACHINING
Milled Parts
Dan-Loc Group has 4-axis milling capability and the expertise to produce specialtymachined components. Our staff has the experience and capabilities to performcomplex profile milling on difficult to machine materials ranging from high carbonsteel to all grades of stainless steel and exotics.
EDM(Wire and Spark Erosion)
Electrical Discharge Machining (AKA wire & spark erosion andwire & die sink) is used to produce complex, very tight toleranceshapes and features which are difficult to produce usingconventional machining techniques. Dan-Loc Group has accessto over 30 CNC EDM machine tools globally.
Kitson Road, Leeds
West Yorkshire, LS10 1NR
United Kingdom
office: +44 (0)113 245 0726
fax: +44 (0)113 242 0047
Dan-Loc Group - SingaporeJTC Summit
8 Jurong Town Hall Road, #24-05
Singapore 609434
office: +65 6818 0987
fax: +65 6818 0801
Dan-Loc Group - MalaysiaSuite 8-1 & 8-2, Level 8 Menara CIMB
No. 1, Jalan Stesen Sentral 2
Kuala Lumpur Sentral
50470 Kuala Lumpur
office: +603 2298 8496
fax: +603 2298 8201
725 North Drennan / Houston, Texas 77003
phone: 713.356.3500 / fax: 713.356.3501
toll free: 888.396.2658 / www.danlocgroup.com
www.danlocgroup.com
Dan-Loc Express - Ohio294 Fox Drive
Piqua, Ohio 45356
phone: 937.778.0485
Dan-Loc Express - Louisiana2808 South Ruby Ave.
Gonzales, Louisiana 70737
phone: 225.644.6449
“We are in business to take care of our customers!
We will remain a customer-focused company by centering
our culture, decisions, and innovation on their needs.”
Rev17018
QUALITY ASSURANCE
Dan-Loc Group has established strict processes of quality assurance
and quality control which are certified ISO 9001:2008. Our quality manage-
ment system manual is available upon request. We are also in compliance
with the U.S. Fastener Quality Act.
Dan-Loc Group has a full range of in-house testing equipment to cover your measuring,
gauging, destructive and non-destructive testing requirements and assure high quality
products. Mill Test Reports and Certifications are available with each order, upon request.
Dan-Loc Group is an API Spec Q1 Certified manufacturer and licensed to use the API Spec 20E
Monogram (20E-0022) and Spec 6A Monogram (6A-1867). Dan-Loc Group is a global leader in
the manufacturing and distribution of standard and specialty fasteners (all thread studs, tap end studs,
double end studs, Dan-Loc studs and custom bolts), standard and specialty gaskets (API ring gaskets, pro-
prietary subsea and surface wellhead gaskets, spiral wound gaskets and non-metallic gaskets), and precision
machined components.
top related