the ess adu project mats lindroos head of the ess accelerator division lund, 2011-03-23

The ESS ADU project

Mats Lindroos

Head of the ESS Accelerator DivisionLund, 2011-03-23

ESS program Goal

>Neutrons at ESS in Lund before the end of the decade!

ESS accelerator high-level technical objectives:

5 MW long pulse source-2 ms pulses-20 Hz-Protons (H+)-Low losses-High reliability, >95%-Continuous cryostats for minimum energy consumption-Flexible design for a future power upgrade

ESS accelerator designHigh level objectives

7

LINAC layout

Length (m)

Input Energy (MeV)

Frequency (MHz)

Geometric β

# of Sections

Temp (K)

RFQ 4 75 × 10-3 352.2 -- 1 ≈ 300

DTL 19 3 352.2 -- 3 ≈ 300

Spoke 52 50 352.2 0.45 14 (3c) ≈ 2

Low Beta 57.5 200 704.4 0.63 10 (4c) ≈ 2

High Beta 215 500 704.4 0.75 19 (8c) ≈ 2

HEBT 100 2500 -- -- -- --

7

M. Eshraqi and A. Ponton, ESS

Linac R&D in progress

IPHI RFQ at CEA-Saclay

SC 5 cell cavity for 704 MHz, CEA and CNRSSC single spoke cavity,

IPNO (CNRS)

LINAC 4

ESS project strategy

2011 2012 2013 2014 2015 2016 2017

2018 2019

TDRs with cost and Schedule

International convention signed

Design Updates Construction projects

First protons

P2B projects

Cryomodule production starts

P2B assures a stringent project framework for prototyping and engineering design reports, a continuous transition from design to construction and keeps the collaborations intact through the construction decision process

First neutrons

DU

P2B

DU

P2B

P2B

Const.

P2B

Const.

P2B

ADU project

• Design Report for the end of 2012 with clear costing and schedule & initial prototyping• Readiness to construct by the end of 2012 -- all requirement

and interface documents and lay-out drawings ready• Energy budget and sustainability should be taken into

account in each work package• Milestone end of 2011: New baseline and first version of

design report

• Responsibilities within Management team• S.Peggs – Communication• R. Duperrier – System engineering• C.Oyon – Internal review• M. Lindroos – Project leader

Accelerator Design Update

Work Package (work areas)

1. Management Coordination – ESS (Mats Lindroos)2. Accelerator Science – ESS (Steve Peggs)

3. Infrastructure Services – Tekniker, Bilbao (Josu Eguia)4. SCRF Spoke cavities – IPN, Orsay (Sebastien Bousson)

5. SCRF Elliptical cavities – CEA, Saclay (Guillaume Devanz)6. Front End and NC linac – INFN, Catania (Santo Gammino)

7. Beam transport, NC magnets and Power Supplies – Århus University (Søren Pape-Møller)8. RF Systems – Uppsala university (Roger Ruber)

Josu Eguia

Guillaume Devanz

Sebastien Bousson

Søren Pape Møller

Roger Ruber

Romuald Duperrier (30 years ago)

Steve PeggsCristina Oyon

Mats Lindroos

Santo Gammino

Prototypes

• Planned and proposed prototypes in ADU project (before 2013):– SC Cavities (High beta elliptical and spoke types) at CEA and IPNO– Tests with existing ion source and RFQ (under assembly) in Catania and at CEA– Test of ITER type control system HW unit with SW interface (“Control box”)– First beam instrumentation in Lund

• Planned and proposed prototypes in P2B project– RF source, control and distribution system in Uppsala– Discussions with RRCAT in India on the construction of a low beta elliptical cavity prototype

with the aim of building these cavities in India as an Indian in-kind contribution to ESS– Discussions with JLAB for a additional spoke cavity prototype built in the USA– Half length cryomodule for 4 elliptical cavities with CERN– Full length cryomodules for all SC cavity types– Beam instrumentation– Final version of Ion source in Catania– DTL at INFN– All ESS beam instrumentation in Lund

SC elliptical cavity

SC spoke cavity

First simulation results

Test stand strategy

• 704 MHz test stand for SC elliptical cavities and a cryomodule– ESS is contributing with a modulator to the CERN test-stand– Study and costing in progress for CERN, CEA and Uppsala test stands– Focus in Uppsala on RF source, control and distribution (energy

aspects)– Study of the possibility to use the XFEL infrastructure and test stands

at DESY and CEA for ESS construction

• 352 MHz test stand for SC spoke cavities and cryomodules– One test stand at CEA for NC structures– One test stand under construction at IPNO in Paris

• Test area for Ion Source development exists in Catania

Test cryostat

Upgrades

• The mandate is to build a 5 MW accelerator!• The presently favored upgrade scenario is a power

upgrade to higher power with maintained time structure

• We will study how this can be prepared within the present 5 MW baseline– The additional cost should be understood and

made apparent in the costing of the 5 MW baseline

– First technical studies and financial estimates for the upgrade itself should be done as part of the ADU project

ESS Energy Solution - Development and Demonstration

”Powerbox” - electricity from waste heat

Seasonal storageCooling and Heat

District Heatin

g

On Site Solar Systems

Energy Exhibition at Visitor Centre

Research, Development and Demonstration of emerging energy technologies strengthen sustainability message and energy culture

Energy savings in improved effiency equipment: 20 %

CO2 global impact: 0 ton/year Investments connection DH: 1 M€ Operating costs (revenue) : - 1,5 M€

P2B Acc Prototypes - 1Category Description Where? Estimate cost

Beam Instr BPM: Beam Position Monitor

BLM: Beam Loss Monitor

TPM: Transverse Profile monitor (2 Types)

BSM: Bunch Shape Monitor

RF LLRF: Low Level RF Lund

EHC: 8 Elliptical cavities – high beta CEA-Saclay

ELC: 4 Elliptical cavities – low beta

SPC: 4 Spoke cavities 3 at CNRS

Couplers 704 MHz 8 at CEA-Saclay

Couplers 353 MHz 3 at CNRS

P2B Acc Prototypes - 2Category Description Where? Estimated

cost

RF RFQ CEA

DTL structure and tank

MEBT with chopper and collimator

Beam Ion Source INFN

Quads and magnets

CRYO CMH1: Cryo design, continuous

CMH2: Cryo design, segmented

CMH3: Cryo design, hybrid

CMH3: Cryomodule, high-beta, final

CML: Cryomodule, low beta, final

CMS: Cryomodule, Spoke, final

CMT: Cryomdoule, general test CERN

Cryoline and jumper module

P2B Acc prototypes - 3

VAC Pump station Where Cost

INFRA Mock-up of tunnel or Virtual reality model

CONTROL Controlbox with HW and SW, V1 ESS

Controlbox with HW and SW, V2

Timing modules

COMPUTING Controls development and scientific computing environment AD

ESS

VACUUM Pump station linac

Test stand needs AD

Category Description Where? Cost

Test-stand Test-stand 704 MHz for CMT CERN

Test-stand 704 MHz for proto CMs

Test-stand 352 MHz for proto CMs IPNO, CEA-SACLAY

Test-stand for production CMs

Front End test stand CEA

Test stand for ion source INFN

Test-stand RF Source and Distribution Uppsala

Conclusions>We will build the ESS in Lund and with all the

others in the ESS program deliver first protons before the end of the decade

>The Accelerator Design will permit a long life with many upgrades

>The Accelerator design, prototyping and construction will be done in a collaboration with ESS AB in Lund as coordinator and future owner

>The energy aspects of the accelerator complex are very important

>Many Thanks to all members of the emerging ESS accelerator collaboration

Tack!