test & measuring instrument catalogg_center/assets/… · 2018 new products volume 09. jan,...
Post on 18-Jul-2020
1 Views
Preview:
TRANSCRIPT
TEST & MEASURING
INSTRUMENT CATALOG
www.uniteqcorp.com
INDEX
High Voltage Programmable Switching DC Power Supply ------------- 1
300W~900W Programmable Switching DC Power Supply ------------- 10
Multiple Output Dual Range Switching DC Power Supply ------------- 13
360W Single Output Switching DC Power Supply ------------------------ 15
150W~600W Programmable DC Electronic Load -------------------------- 16
180W~375W Single Output Programmable DC Power Supply -------- 20
195W~315W Multi-Channel Programmable DC Power Supply -------- 23
115W~315W Triple Output Linear DC Power Supply --------------------- 25
180W~300W Dual Output Linear DC Power Supply ----------------------- 29
90W~300W Single Output Linear DC Power Supply ---------------------- 31
200W~100KW AC Power Source ------------------------------------------------ 34
25MHz~60MHz Arbitrary Waveform Function Generator --------------- 36
10MHz~20MHz Arbitrary Waveform DDS Function Generator -------- 38
5MHz~60MHz Low-Cost DDS Function Generator ------------------------ 41
10KHz~200KHz LCR Meter -------------------------------------------------------- 47
Standby Power Meter with Data Logger -------------------------------------- 49
All-in-One Universal System ----------------------------------------------------- 53
2MHz~10MHz Sweep Function Generator ------------------------------------ 57
1.5GHz~3.7GHz Universal/Frequency Counter ----------------------------- 59
True RMS Bench Digital Multimeter -------------------------------------------- 63
Handheld Digital Multimeter ------------------------------------------------------ 68
Digital Storage Oscilloscope ----------------------------------------------------- 70
Analog Oscilloscope ---------------------------------------------------------------- 72
FM/AM Signal Generator ----------------------------------------------------------- 74
2018 NEW PRODUCTS
Volume 09. Jan, 2018
5MHz~60MHz LOW‐COST DDS FUNCTION GENERATOR
• 2 output channels• 32 built-in waveforms• 40 sets save & recall for panel settings• Modulations: FM, AM, FSK, ASK, PSK• Frequency sweep, amplitude sweep,
burst, and TTL output functions• CHA & CHB ADD output (DFG-2040 &2060)
25MHz~60MHz ARBITRARY WAVEFORM FUNCTION GENERATOR
• 1μHz~25MHz/40MHz/60MHz frequency• 2 independent output channels • 4.5-inch TFT LCD display• Sampling rate 150MSa/s, vertical resolution
14 bits and waveform length of 16k points• 6 standard waveforms, 50 built-in waveforms
and 12 user-defined arbitrary waveforms• AM, DSSC AM, FM, PM, ASK, FSK & BPSK• RS232, USB device and USB Host
10KHz ~ 200KHz LCR METER
MODELOUTPUT
FREQUENCY
SAMPLING
RATE
WAVEFORM
LENGTH
Frequency
CounterRS232C & USB
DFG‐2005 1μHz~5MHz optionDFG‐2010 1μHz~10MHz optionDFG‐2020 1μHz~20MHz optionDFG‐2040 40μHz~40MHz StandardDFG‐2060 40μHz~60MHz Standard
100MSa/s
180MSa/s 16000 points
1024 points200MHz
PROGRAMMABLE SWITCHINGDC POWER SUPPLY
• 32-bit core processor• 5-digit 4.3-inch TFT LCD display• 100 sets memories for internal &
500 memories for U disk storage/save• Support FAT16 and FAT32 files
• Max. rated output 600W and 2400W• Constant voltage and constant current
operations and auto CV/CC switch • OVP, OCP, OTP, OLP and UVP• RS232, RS485 and RS422
600W & 1200W PROGRAMMABLE SWITCHING DC POWER SUPPLY
Features
PCH Series
• Program debugging function by PC • Max. rated output 600W and 1200W• Max. rated voltage from +1000V to +12KV• Option for negative output from -1000V to -12KV• Constant voltage and constant current operations, auto CV/CC switch • Built into 2U 19-inch standard chassis• 4 1/2 digits LED display for voltage and current• Thermostatic control fan, low noise• Adopting ZVZCS PWM technology, high efficiency and high stability• Low ripple, high stability• Front panel operation: preset voltage and current, output ON/OFF• Multiple protections: OVP, OCP, OTP, OLP and UVP• Multiple programming interfaces: RS232, RS485 and RS422• Support ModBus-RTU commands
The PCH series are high power output Switching DC power supply with rated power of 600W and 1200W. The PCH series adopts ZVZCS PWM technology, which greatly reduces switching consumption and therefore facilitates switching function with high efficiency and high stability.
The PCH series are built into a 2U 19‐inch standard chassis. The maximum rated voltage is from +1000V to +12KV. There is option for negative output from ‐1000V to ‐12KV. RS232, RS485 and RS422 communication interfaces are made as standard part for PCH series, providing multiple communication choices for digital control.
1
Technical Specification PCH Series
PCH600-10H PCH600-12H PCH600-15H PCH600-20H PCH600-30H PCH600-40H PCH600-50H
PCH600-10HN PCH600-12HN PCH600-15HN PCH600-20HN PCH600-30HN PCH600-40HN PCH600-50HN
0~1000V 0~1200V 0~1500V 0~2000V 200~3000V 200~4000V 300~5000V
-100~-1000V -120~-1200V -150~-1500V -200~-2000V -300~-3000V -400~-4000V -500~-5000V
Current 0~600mA 0~500mA 0~400mA 0~300mA 0~200mA 0~150mA 0~120mA
0~1050V 100~1260V 100~1575V 200~2100V 200~3150V 200~4200V 300~5250V
0~-1050V -100~-1260V -100~-1575V -200~-2100V -300~-3150V -400~-4200V -500~-5250V
≤0.05% FS ≤0.05% FS ≤0.05% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS
Voltage 1V 1V 1V 1V 1V 1V 1V
Current 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA
OVP 1V 1V 1V 1V 1V 1V 1V
Voltage 1V 1V 1V 1V 1V 1V 1V
Current 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA
Built-in UVP protection w ith limit of 165Vac.
The output w ill be shut dow n the UVP is activated.
Dimensions 482Wx88Hx460D mm
Under Voltage Protection (U.V.P.)
Storage environment -20 ~70 , 10%~90%RH
Pow er source AC220V±10%, 47~63Hz
Weight 11~14kg
General
Cooling method Cooling fan
Operating environment 0 ~40 , 10%~80%RH
Over Current Protection (O.C.P.) Over load, short circuit and output current limit
Over Temperature Protection (O.T.P.)
Built-in OTP protection w ith heat sink temperature limit of 50 ±5%.
The output w ill be shut dow n w hen OTP is activated.
Commands ModBus-RTU
Protection
Over Voltage Protection (O.V.P.)Built-in OVP protection w ith limit of 105% rated output voltage.
The output w ill be shut dow n w hen OVP is activated.
Display accuracy Voltage≤0.2%+2LSB, Current ≤0.5%+2LSB
Programming
Interface RS232, RS485 and RS422
Line regulation CV≤0.1%+2LSB, CC≤0.1%+2LSB
Ripple & Noise
Programming resolution
Display resolution
Output
Load regulation CV≤0.5%+2LSB, CC≤0.5%+2LSB
Model
Voltage
Rated output
OVP
2
PCH Series
PCH600-60H PCH600-80H PCH600-100H PCH600-120H PCH1200-10H PCH1200-12H
PCH600-60HN PCH600-80HN PCH600-100HN PCH600-120HN PCH1200-10HN PCH1200-12HN
600~6000V 800~8000V 1000~10000V 1200~12000V 0~1000V 0~1200V
-600~-6000V -800~-8000V -800~-10000V -1200~-12000V -100~-1000V -120~-1200V
Current 0~100mA 0~75mA 0~60mA 0~50mA 0~1.2A 0~1A
600~6120V 800~8400V 1000~10500V 1200~12600V 0~1050V 0~1260V
-500~-6120V -800~-8400V -1000~-10500V -1200~-12600V -100~-1050V -120~-1260V
≤0.1% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS
Voltage 1V 1V 1V 1V 1V 1V
Current 0.1mA 0. 01mA 0. 01mA 0. 01mA 1mA 1mA
OVP 1V 1V 1V 1V 1V 1V
Voltage 1V 1V 1V 1V 1V 1V
Current 0.1mA 0.01mA 0.01mA 0.01mA 1mA 1mA
Weight 11~14kg
Dimensions 482Wx88Hx460D mm
Under Voltage Protection(U.V.P.)
Operating environment 0 ~40 , 10%~80%RH
Storage environment -20 ~70 , 10%~90%RH
Pow er source AC220V±10%, 47~63Hz
Built-in UVP protection w ith limit of 165Vac.
The output w ill be shut dow n the UVP is activated.
General
Cooling method Cooling fan
Over Current Protection (O.C.P.) Over load, short circuit and output current limit
Over Temperature Protection (O.T.P.)
Built-in OTP protection w ith heat sink temperature limit of 50 ±5%.
The output w ill be shut dow n w hen OTP is activated.
Over Voltage Protection (O.V.P.)Built-in OVP protection w ith limit of 105% rated output voltage.
The output w ill be shut dow n w hen OVP is activated.
Ripple & Noise
Programming resolution
Display resolution
Display accuracy Voltage≤0.2%+2LSB, Current ≤0.5%+2LSB
Programming
Interface RS232, RS485 and RS422
Commands ModBus-RTU
Protection
Line regulation CV≤0.1%+2LSB, CC≤0.1%+2LSB
Output
Load regulation CV≤0.5%+2LSB, CC≤0.5%+2LSB
Model
Voltage
Rated output
OVP
3
PCH Series
PCH1200-15H PCH1200-20H PCH1200-30H PCH1200-40H PCH1200-50H PCH1200-60H
PCH1200-15HN PCH1200-20HN PCH1200-30HN PCH1200-40HN PCH1200-50HN PCH1200-60HN
0~1500V 0~2000V 300~3000V 400~4000V 500~5000V 600~6000V
-150~-1500V -200~-2000V -300~-3000V -400~-4000V -500~-5000V -600~-6000V
Current 0~800mA 0~600mA 0~400mA 0~300mA 0~240mA 0~200mA
100~1575V 200~2100V 300~3150V 400~4200V 500~5250V 600~6120V
-100~-1575V -200~-2100V -300~-3150V -400~-4200V -500~-5250V -600~-6120V
≤0.1% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS
Voltage 1V 1V 1V 1V 1V 1V
Current 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA
OVP 1V 1V 1V 1V 1V 1V
Voltage 1V 1V 1V 1V 1V 1V
Current 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA
Specifications are subject to change without prior notice.
Weight 11~14kg
Dimensions 482Wx88Hx460D mm
Under Voltage Protection
(U.V.P.)
Operating environment 0 ~40 , 10%~80%RH
Storage environment ‐20 ~70 , 10%~90%RH
Power source AC220V±10%, 47~63Hz
Built‐in UVP protection with limit of 165Vac.
The output will be shut down the UVP is activated.
General
Cooling method Cooling fan
Over Current Protection (O.C.P.) Over load, short circuit and output current limit
Over Temperature Protection
(O.T.P.)
Built‐in OTP protection with heat sink temperature limit of 50 ±5%.
The output will be shut down when OTP is activated.
Over Voltage Protection (O.V.P.)Built‐in OVP protection with limit of 105% rated output voltage.
The output will be shut down when OVP is activated.
Ripple & Noise
Programming
resolution
Display
resolution
Display accuracy Voltage≤0.2%+2LSB, Current ≤0.5%+2LSB
Programming
Interface RS232, RS485 and RS422
Commands ModBus‐RTU
Protection
Line regulation CV≤0.1%+2LSB, CC≤0.1%+2LSB
Output
Load regulation CV≤0.5%+2LSB, CC≤0.5%+2LSB
Model
Voltage
Rated output
OVP
4
1200W & 2400W PROGRAMMABLE SWITCHING DC POWER SUPPLY
Features
PCL Series
• Max. rated output 1200W and 2400W• Max. rated voltage from 6V to 600V, max. rated current from 2A to 200A• Constant voltage and constant current operations, auto CV/CC switch • Built into 2U 19-inch standard chassis• 4 1/2 digits LED display for voltage and current• Thermostatic control fan, low noise• Adopting ZVZCS PWM technology, high efficiency and high stability• Low ripple and high stability• Front panel operation: preset voltage and current, output ON/OFF• Multiple protections: OVP, OCP, OTP, OLP and UVP• Multiple programming interfaces: RS232, RS485 and RS422• Support ModBus-RTU commands
For max. current <100A For max. current ≥100A
The PCL series are high power output Switching DC power supply with rated power of 1200W and 2400W. The PCL series adopts ZVZCS PWM technology, which greatly reduces switching consumption and therefore facilitates switching function with high efficiency and high stability.
The PCL series are built into a 2U 19‐inch standard chassis. The maximum rated voltage is from 6V to 600V and the maximum rated current is from 2A to 200A. RS232, RS485 and RS422 communication interfaces are made as standard part for PCL series, providing multiple communication choices for digital control.
5
Technical Specification PCL Series
PCL1200-6 PCL1200-12 PCL1200-15 PCL1200-30 PCL1200-60 PCL1200-1H
Voltage 0~6V 0~12V 0~15V 0~30V 0~60V 0~100V
Current 0~200A 0~100A 0~80A 0~40A 0~20A 0~12A
OVP 0~6.3V 0~12.6V 0~15.75V 0~31.5V 0~63V 0~105V
≤50mV ≤50mV ≤50mV ≤50mV ≤50mV ≤100mV
OVP 0.001V 0.01V 0.01V 0.01V 0.01V 0.1V
Voltage 0.001V 0.01V 0.01V 0.01V 0.01V 0.1V
Current 0.1A 0.1A 0.01A 0.01A 0.01A 0.01A
Voltage 0.001V 0.01V 0.01V 0.01V 0.01V 0.1V
Current 0.1A 0.1A 0.01A 0.01A 0.01A 0.01A
Rated output
Load regulation
Line regulation CV≤0.1%+2LSB, CC≤0.1%+2LSB
Model
Output
Ripple & Noise
Programming resolution
Display resolution
Display accuracy Voltage≤0.2%+2LSB, Current ≤0.5%+2LSB
Programming
Interface RS232, RS485 and RS422
Commands ModBus-RTU
Protection
Over Voltage Protection (O.V.P.)Built-in OVP protection with limit of 105% rated output voltage.
The output will be shut down when OVP is activated.
Over Current Protection (O.C.P.) Over load, short circuit and output current limit
Built-in OTP protection with heat sink temperature limit of 50 ±5%.
The output will be shut down when OTP is activated.
Under Voltage Protection
(U.V.P.)
Built-in UVP protection with limit of 165Vac.
The output will be shut down the UVP is activated.
Dimensions 482Wx88Hx460D mm
CV≤0.2%+2LSB, CC≤0.2%+2LSB
CV≤0.1%+2LSB, CC≤0.1%+2LSB
Storage environment -20 ~70 , 10%~90%RH
Power source AC220V±10%, 47~63Hz
Weight 11~14kg
General
Cooling method Cooling fan
Operating environment 0 ~40 , 10%~80%RH
Over Temperature Protection (O.T.P.)
6
PCL Series
PCL1200-150 PCL1200-2H PCL1200-3H PCL1200-400 PCL1200-5H PCL1200-6H
Voltage 0~150V 0~200V 0~300V 0~400V 0~500V 0~600V
Current 0~8A 0~6A 0~4A 0~3A 0~2.4A 0~2A
OVP 0~157.5V 0~210V 0~315V 0~420V 0~525V 0~630V
≤100mV ≤100mV ≤100mV ≤100mV ≤200mV ≤200mV
OVP 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V
Voltage 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V
Current 0.001A 0.001A 0.001A 0.001A 0.001A 0.001A
Voltage 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V
Current 0.001A 0.001A 0.001A 0.001A 0.001A 0.001A
Model
Output
Rated output
Load regulation CV≤0.1%+2LSB, CC≤0.1%+2LSB
Line regulation CV≤0.1%+2LSB, CC≤0.1%+2LSB
Over Voltage Protection (O.V.P.)Built-in OVP protection with limit of 105% rated output voltage.
The output will be shut down when OVP is activated.
Ripple & Noise
Programming resolution
Display resolution
Display accuracy Voltage≤0.2%+2LSB, Current ≤0.5%+2LSB
Programming
Interface RS232, RS485 and RS422
Commands ModBus-RTU
Protection
Over Current Protection (O.C.P.) Over load, short circuit and output current limit
Over Temperature Protection (O.T.P.)
Built-in OTP protection with heat sink temperature limit of 50 ±5%.
The output will be shut down when OTP is activated.
(U.V.P.)
Built-in UVP protection with limit of 165Vac.
The output will be shut down the UVP is activated.
General
Cooling method Cooling fan
Under Voltage Protection
Weight 11~14kg
Dimensions 482Wx88Hx460D mm
Operating environment 0 ~40 , 10%~80%RH
Storage environment -20 ~70 , 10%~90%RH
Power source AC220V±10%, 47~63Hz
7
PCL Series
PCL2400-12 PCL2400-20 PCL2400-30 PCL2400-40 PCL2400-60 PCL2400-1H
Voltage 0~12V 0~20V 0~30V 0~40V 0~60V 0~100V
Current 0~200A 0~120A 0~80A 0~60A 0~40A 0~24A
OVP 0~12.6V 0~21V 0~31.5V 0~42V 0~63V 0~105V
≤100mV ≤100mV ≤100mV ≤100mV ≤100mV ≤100mV
OVP 0.01V 0.01V 0.01V 0.01V 0.01V 0.1V
Voltage 0.01V 0.01V 0.01V 0.01V 0.01V 0.1V
Current 0.1A 0.1A 0.01A 0.01A 0.01A 0.01A
Voltage 0.01V 0.01V 0.01V 0.01V 0.01V 0.1V
Current 0.1A 0.1A 0.01A 0.01A 0.01A 0.01A
Model
Output
Rated output
Load regulation CV≤0.1%+2LSB, CC≤0.1%+2LSB
Line regulation CV≤0.1%+2LSB, CC≤0.1%+2LSB
Over Voltage Protection (O.V.P.)Built-in OVP protection with limit of 105% rated output voltage.
The output will be shut down when OVP is activated.
Ripple & Noise
Programming resolution
Display resolution
Display accuracy Voltage≤0.2%+2LSB, Current ≤0.5%+2LSB
Programming
Interface RS232, RS485 and RS422
Commands ModBus-RTU
Protection
Over Current Protection (O.C.P.) Over load, short circuit and output current limit
Over Temperature Protection (O.T.P.)
Built-in OTP protection with heat sink temperature limit of 50 ±5%.
The output will be shut down when OTP is activated.
(U.V.P.)
Built-in UVP protection with limit of 165Vac.
The output will be shut down the UVP is activated.
General
Cooling method Cooling fan
Under Voltage Protection
Weight 11~14kg
Dimensions 482Wx88Hx460D mm
Operating environment 0 ~40 , 10%~80%RH
Storage environment -20 ~70 , 10%~90%RH
Power source AC220V±10%, 47~63Hz
8
PCL Series
PCL2400-150 PCL2400-2H PCL2400-3H PCL2400-400 PCL2400-50H PCL2400-6H
Voltage 0~150V 0~200V 0~300V 0~400V 0~500V 0~600V
Current 0~16A 0~12A 0~8A 0~6A 0~4.8A 0~4A
OVP 0~157.5V 0~210V 0~315V 0~420V 0~525V 0~630V
≤100mV ≤100mV ≤200mV ≤200mV ≤200mV ≤200mV
OVP 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V
Voltage 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V
Current 0.01A 0.01A 0.001A 0.001A 0.001A 0.001A
Voltage 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V
Current 0.01A 0.01A 0.001A 0.001A 0.001A 0.001A
Specifications are subject to change without prior notice.
Model
Output
Rated output
Load regulation CV≤0.1%+2LSB, CC≤0.1%+2LSB
Protection
Line regulation CV≤0.1%+2LSB, CC≤0.1%+2LSB
Ripple & Noise
Programming resolution
Display resolution
Display accuracy Voltage≤0.2%+2LSB, Current ≤0.5%+2LSB
Programming
Interface RS232, RS485 and RS422
Commands ModBus-RTU
Cooling method Cooling fan
Over Voltage Protection (O.V.P.)Built-in OVP protection with limit of 105% rated output voltage.
The output will be shut down when OVP is activated.
Over Current Protection (O.C.P.) Over load, short circuit and output current limit
Over Temperature Protection (O.T.P.)
Built-in OTP protection with heat sink temperature limit of 50 ±5%.
The output will be shut down when OTP is activated.
Under Voltage Protection
(U.V.P.)
Built-in UVP protection with limit of 165Vac.
The output will be shut down the UVP is activated.
General
Weight 11~14kg
Dimensions 482Wx88Hx460D mm
Operating environment 0 ~40 , 10%~80%RH
Storage environment -20 ~70 , 10%~90%RH
Power source AC220V±10%, 47~63Hz
9
300W~900W PROGRAMMABLE SWITCHING DC POWER SUPPLY
Features
• High accuracy, high resolution• Over load, over voltage, over current, over temperature and reverse polarity protections• Constant voltage and constant current operations, auto CV and CC switch• 4.3-inch TFT LCD display• High speed rotary dial and keypad input• Built-in beeper alarm• Panel lock and output ON/OFF function• List mode function and 100 sets save & recall for voltage• Current and time setups, and easy use in auto test• Remote sense function• Low resistance measurement function, display load resistance value• Battery charge mode• Standard USB host interface for data storage and recall from external USB flash driver• Standard RS-232 interface, support SCPI commands, support Labview• Standard 0-5V analog control• RS-232 to USB cable provided• Optional RS-485 interface, support Modbus
300W to 900W SPC series are high accuracy programmable DC power supplies with single output. MPU control & RS‐232/RS‐485/USB interface make SPC series facilitate auto test and auto control. The commands of the SPC series are compliant with SCPI commands. Users can easily develop programs to facilitate different applications in auto test and auto control. Users can also store or recall data via the USB host on front panel.
The 4.3‐inch TFT LCD display gives full display for parameters and output waveforms. Digital input fulfilled by rotary dial and keypad input makes input to be fast and accurate. Voltage and current regulations by software avoids human error and makes the SPC series to be more accurate.
SPC Series
MODEL VOLTAGE CURRENT
SPC-3010 30V 10A
SPC-1560 15V 60A
SPC-3030 30V 30A
SPC-6015 60V 15A
10
SPC Series
11
Technical Specification SPC Series
SPC-3010 SPC-1560 SPC-3030 SPC-6015
0~30V 0~15V 0~30V 0~60V
0~10A 0~60A 0~30A 0~15A
0.1~34V 0.1~18V 0.1~34V 0.1~64V
0.1~12A 0.1~62 A 0.1~34A 0.1~17A
Voltage
Current
Voltage
Current
4.5kg 5.5kg 5.5kg 5.5kg
Specifications are subject to change without prior notice.
Model
Rated output (0 ~40 )
Voltage
Current
Constant Current Operation
Line regulation ≤0.2%+3mA
O.V.P
O.C.P
Constant Voltage Operation
Line regulation ≤0.01%+4mV
Load regulation ≤0.1%+5mV
Ripple & Noise (20Hz~20MHz) 2mVrms, 30mVpp
Recovery time ≤1.5ms (50% load change)
Reading accuracy (25±5 )
±(0.02% of reading +5mV)
±(0.3% of reading +10mA)
Load regulation ≤0.2%+5mA
Ripple & Noise ≤10mArms
Display
Voltmeter 5 digits LCD display
Ammeter 5 digits LCD display
Setting resolution 1mV/1mA
Reading resolution 1mV/1mA
Setting accuracy (25±5 )
±(0.03% of reading + 10mV)
±(0.3% of reading + 10mA)
Memory 100 sets internal save, support save to USB flash driver
Insulation Between base and terminals: ≤60VDC
General
Protection Over load, over voltage, over current, over temperature and reverse polarity protections
Panel lock Provided
Remote sense function Maximum compensation voltage 0.1V@ Maximum output
Battery charge Lithium battery curve charge
Interface
RS232 interface, Support SCPI commands
0-5V analog control
RS232 to USB cable provided
Optional RS485 interface, support ModBus
Weight
Indoor use Altitude: ≤2000m Ambient temperature: 0~40
Relative humidity: ≤80% Installation category: II Pollution degree: 2Operating environment
Storage environment -10 ~70 , ≤70%RH
Power source AC220V±10%, 50/60Hz
Accessories Power cord x1, Operation manual x1, RS232 cable x1, Software CD x1
Dimension (WxHxD) 215x89x412mm
12
MULTIPLE OUTPUT DUAL RANGESWITCHING DC POWER SUPPLY
SPS‐3606
Features
• Three independent & isolated output : CH1/ CH2 dual range output of 30V/6A or 60V/3ACH3 0.1~5V/3A, adjustable output
• Constant voltage and constant current operations• Auto Series and Parallel tracking operations providing flexible output of 30V/12A,
60V/6A or 120V/3A• High power conversion efficiency by improving the power efficiency by 25%• Manual and remote ON/OFF control• Manual over voltage protection• Over voltage, over load, over temperature and reverse polarity protections• Power source AC115V/230V auto switch• Fan speed control circuit to minimize acoustic noise• Compact design and light weight
SPS‐3606 Switching mode DC power supply provides 375W output capacity with three independent outputs and CH1/CH2 dual‐range output (30V/ 6A or 60V/3A), which accommodates a wide range of applications.
On the basis of fixed output capacity, it enables output voltage or current to the maximum. With high power density and high conversion efficiency, multiple protections, high reliability, low noise and compact design, SPS‐3606 is completely adequate for satisfying mainstream power supply demands.
13
Technical Specification SPS‐3606
Independent mode 0~30V/0~6A; 0~60V/0~3A
Series mode 0~60V/0~6A; 0~120V/0~3A
Parallel mode 0~30V/0~12A; 0~60V/0~6A
0.1~5V/3A
Line regulation
Load regulation
Riple & Noise
Recovery time
Line regulation
Load regulation
Riple & Noise
Tracking error
Series regulation
Riple & Noise
Voltage up(10%~90%)
Voltage down(90%~10%)
Output voltage
Output current
Protection
Accuracy
Meter
Resolution
Accuracy
Protection
Remote control
Fan noise
Power source
Accessories
Dimension & Weight
Constant current operation
Tracking Operation
Output On/Off Response Time
Output
CH3
Over voltage protection
Display
Insulation
3A
Over voltage, over load, over temperature and reverse polarity protections
±(0.5% reading+0.5V)
31/2 digits0.39" LED display100mV/10mA
±(0.5% reading +2 digits)
≤50dB
Current: ≤150ppm/ +3mA
Between chassis & terminal: ≥100MΩ/1000VDC
Between chassis and AC code:≥100MΩ/1000VDC
Over voltage and reverse polarity protections
Voltage: ≤100ppm/ +3mV
≤10mVrms (5Hz~1MHz); ≤100mVpp (20Hz~20MHz)
≤100ms (≤95% rated load)
≤100ms (≥10% rated load)
0.1~5V, adjustable
CH3 output
≤0.2%+3mA
≤0.2%+3mA
≤3mA rms
≤(0.5%+10mV) of the master
≤300mV
CH1 & CH2
≤0.01%+3mV
≤0.01%+5mV (rating current≤6A); ≤0.01%+8mV (rating current≤12A)
≤5mV rms (5Hz~1MHz); ≤50mVpp (20Hz~20MHz)
≤100us (50% load change, minimum load 0.5A)
Constant voltage operation
Temperature co-efficient
Ambient temperature: 0~40
Relative humidity: ≤80%
Ambient temperature: 0 ~70
Operating environment
Storage environmentRelative humidity:≤70%
AC 115V/230V±15%, 50/60Hz
Operation manual ×1, Power cord ×1, Test lead ×1
310×250×150mm, 5.5Kg
Output On/Off
14
360W SINGLE OUTPUT SWITCHING DC POWER SUPPLY
Features
Technical Specification
• 3 digit red LED display of voltage and current
• Constant voltage and current operation
• Coarse and fine voltage control• Short Circuit and Overload
Protection• Cooling Fan automatically operated
by temperature • High efficient Power
Our Switching DC Power Supplies are the ideal DC sources for Lab, Service, Industrial or Educational applications. They are designed with an energy saving circuit for cooler, more reliable and efficient operation at all output levels. All our supplies have 'short circuit' and 'overload' protection providing "fool proof" operation for any applications.
PS‐1000 Series
PS-1230 PS-1820 PS-3610 PS-6006 PS-2415
Voltage 0~12V 0~18V 0~36V 0~60V 0~24V
Current 0~30A 0~20A 0~10A 0~6A 0~15A
Voltage 5mV 5mV 5mV 5mV 5mV
Current 3mA 3mA 3mA 3mA 3mA
Voltage 5mV 5mV 5mV 5mV 5mV
Current 3mA 3mA 3mA 3mA 3mA
Voltage
Current
Voltage (p-p) 100mV 100mV 100mV 100mV 100mV
Voltage (rms) 5mV 5mV 5mV 5mV 5mV
Current (rms) 5mA 5mA 5mA 5mA 5mA
Chassis to Terminal
Chassis to AC input
20 or above (DC 500V)
30 or above (DC 500V)
Dimension
±(0.5%rdg + 2 digits)
±(0.5%rdg + 2 digits)
Instruction Manual, Power Cord, Test Lead, Spare Fuse
115V/230V ±10%, 50/60Hz
Approx. 3.5Kg
138 × 162 × 290 mm
Accessories
MODEL
Line Regulation
Load Regulation
Meter Accuracy
Power Source
Insulation
Weight
Output
Noise & Ripple (Load Max.)
15
150W~600W PROGRAMMABLE DC ELECTRONIC LOAD
Features
DCL‐1000 Series
• 4 basic functions: CC, CV, CR, CP• 9 basic operation modes: CCL, CCH, CVL, CVH, CRL, CRM, CRH, CPV, CPC• 24-bit A/D converter, 16-bit D/A converter, 40kHz D/A conversion speed & high resolution• Hardware circuit for CR function, faster transient response and higher CR accuracy• High speed transient test function, max. test frequency 2kHz• Over current, over voltage, over power, over temperature and reverse voltage protections• 4.3-inch backlit Segment LCD display & Auto ON/OFF function• High speed rotary dial and keypad input• List Mode function, step 10ms-99999s, free to set numbers of cycles and to be linked • Auxiliary functions: short circuit test, battery discharge capacity test• Save & recall function for frequently used setups• Intelligent cooling system, ensure high stability during long-time operation under full load• Standard RS-232 interface, support SCPI commands, support Labview, RS232 to USB cable
The DCL‐1000 series are high performance programmable DC electronic load. Four basic functions and nine basic operation modes provides sufficient solutions wherever power sources need to be tested. Especially unique CPV and CPC modes greatly improved the functionality of constant power operation.
The strong List Mode function, with Min. step 10ms and Max. step 99999s, allows users to set numbers of cycles at free and to link to other lists, facilitating complicated tests. Equipped with RS‐232 interface for PC control, SCPI commands and Labview development platform, the DCL‐1000 series are designed to provide high reliability, great performance and easy operation in research and production of aerospace, ship building, auto electronics, solar battery, fuel cell, etc.
150W DCL-1011
300W DCL-1032600W DCL-1062
Model Power Voltage Current MOV@FS current Model Power Voltage Current MOV@FS current
DCL‐1011 150W 0~150V 1mA~30A 1.5V DCL‐1033 300W 0~500V 1mA~15A 3.8V
DCL‐1031 300W 0~150V 1mA~30A 0.82V DCL‐1061 600W 0~150V 1mA~60A 0.9V
DCL‐1032 300W 0~150V 1mA~60A 1.2V DCL‐1062 600W 0~500V 1mA~30A 4.2V
16
Technical Specification DCL‐1000 Series
DCL-1011 DCL-1031 DCL-1032 DCL-1033 DCL-1061 DCL-1062
0~150V 0~150V 0~150V 0~500V 0~150V 0~500V
1mA~30A 1mA~30A 1mA~60A 1mA~15A 1mA~60A 1mA~30A
150W 300W 300W 300W 600W 600W
1.5V 0.82V 1.2V 3.8V 0.9V 4.2V
0.1~30V 0.1~30V 0.1~30V 0.1~30V 0.1~30V 0.1~30V
1mV 1mV 1mV 1mV 1mV 1mV
0.10~150V 0.10~150V 0.10~150V 0.10~500V 0.10~150V 0.10~500V
10mV 10mV 10mV 10mV 10mV 10mV
0~3A 0~3A 0~6A 0~1.5A 0~6A 0~3A
1mA 1mA 1mA 1mA 1mA 1mA
0~30A 0~30A 0~60A 0~15A 0~60A 0~30A
10mA 10mA 10mA 10mA 10mA 10mA
≈0.06~6Ω ≈0.04~6Ω ≈0.025~3Ω ≈0.3~36Ω ≈0.02~3Ω ≈0.15~18Ω
100uΩ 100uΩ 50uΩ 600uΩ 50uΩ 300uΩ
≈6~600Ω ≈6~600Ω ≈3~300Ω ≈36~3600Ω ≈3~300Ω ≈18~1800Ω
2.7us 2.7us 5.4us 0.45us 5.4us 0.90us
≈60~4000Ω ≈60~4000Ω ≈30~4000Ω ≈360~4000Ω ≈30~4000Ω ≈180~4000Ω
0.30us 0.30us 0.20us 0.051us 0.20us 0.10us
≈0.06~1.12Ω ≈0.04~1.12Ω ≈0.025~0.6Ω ≈0.3~2.4Ω ≈0.02~0.6Ω ≈0.15~1.2Ω
18uΩ 18uΩ 9.6uΩ 38uΩ 9.6uΩ 19uΩ
≈1.12~112Ω ≈1.12~112Ω ≈0.6~60Ω ≈2.4~240Ω ≈0.6~60Ω ≈1.2~120Ω
15us 15us 27us 6.8us 27us 14us
≈11.2~2000Ω ≈11.2~2000Ω ≈6.0~2000Ω ≈24~2000Ω ≈6.0~2000Ω ≈12~2000Ω
1.6us 1.6us 3.0us 0.78us 3.0us 1.5us
0~150W 0~300W 0~300W 0~300W 0~600W 0~600W
P<100W 1mW 1mW 1mW 1mW 1mW 1mW
P≥100W 10mW 10mW 10mW 10mW 10mW 10mW
±(1%+1%FS)
±(1.5%+1.5%FS)
±(1%+0.1%FS)
Rated input (0~40)
Constant voltage mode (CV)
Constant current mode (CC)
Constant resistance mode (CR) (Input voltage /current≥10%FS)
Constant power mode (CP) (Input voltage /current≥10%FS)
±(0.5%+0.5%FS)
±(1%+1%FS)
±(1.5%+1.5%FS)
±(0.5%+0.5%FS)
Resolution
Accuracy (Impedance)
Medium range (VL CRM)
Resolution
Accuracy (Conductance)
Accuracy (Conductance)
High range (VH CRH)
Resolution *2
Accuracy (Conductance)
Low range (VL CRL)
Low range (VH CRL)
Resolution
Resolution
Accuracy
High range (VL CRH)
Resolution
Accuracy (Conductance)
Range
±(0.05%+0.025%FS)
Low range
Resolution
Accuracy
High range
±(0.05%+0.02%FS)
Accuracy (Impedance)
Middle range (VH CRM)
Resolution
Accuracy
High range
Resolution
Accuracy
±(0.1%+0.1%FS)
±(0.1%+0.15%FS)
Voltage
Current
Power *1
MOV@FS current
Model
Resolution
Accuracy
Low range
Resolution
17
DCL‐1000 Series
DCL-1011 DCL-1031 DCL-1032 DCL-1033 DCL-1061 DCL-1062
0~30V 0~30V 0~30V 0~30V 0~30V 0~30V
1mV 1mV 1mV 1mV 1mV 1mV
0~150V 0~150V 0~150V 0~500V 0~150V 0~500V
10mV 10mV 10mV 10mV 10mV 10mV
0~3A 0~3A 0~6A 0~1.5A 0~6A 0~3A
1mA 1mA 1mA 1mA 1mA 1mA
0~30A 0~30A 0~60A 0~15A 0~60A 0~30A
1mA 1mA 1mA 1mA 1mA 1mA
0~150W 0~300W 0~300W 0~300W 0~600W 0~600W
P<100W 1mW 1mW 1mW 1mW 1mW 1mW
P≥100W 10mW 10mW 10mW 10mW 100mW 100mW
CCH (/us) 0.1mA ~1.5A 0.1mA ~1.5A 0.1mA ~3A 0.1mA ~0.75A 0.1mA ~3A 0.1mA ~1.5A
CCL (/us) *3 0.1mA ~0.15A 0.1mA ~0.15A 0.1mA ~0.33A 0.1mA ~0.075A 0.1mA ~0.33A 0.1mA ~0.15A
0.1mA/us 0.1mA/us 0.1mA/us 0.1mA/us 0.1mA/us 0.1mA/us
1s~100h 1s~100h 1s~100h 1s~100h 1s~100h 1s~100h
1s 1s 1s 1s 1s 1s
3000Ah 3000Ah 6000Ah 1500Ah 6000Ah 3000Ah
1mAh 1mAh 1mAh 1mAh 1mAh 1mAh
0.1V~150V 0.1V~150V 0.1V~150V 0.1V~150V 0.1V~150V 0.1V~150V
10mA 10mA 10mA 10mA 10mA 10mA
3.6A 3.6A 7.2A 1.8A 7.2A 3.6A
33A 33A 66A 16.5A 66A 33A
0V 0V 0V 0V 0V 0V
0.044Ω 0.027Ω 0.022Ω 0.24Ω 0.015Ω 0.13Ω
5.6Ω 5.6Ω 2.8Ω 31Ω 2.8Ω 16Ω
58Ω 58Ω 29Ω 310Ω 29Ω 160Ω
0.044Ω 0.027Ω 0.022Ω 0.24Ω 0.015Ω 0.13Ω
1.1Ω 1.1Ω 0.53Ω 2Ω 0.53Ω 1.0Ω
0.3%+0.01Ah
Short circuit
±(0.1%+0.1%FS)
±(0.1%+0.15%FS)
Power measurement (Input voltage /current≥10%FS)
1%+0.1%FS
Current slew rate
CCH
CV
VH CRL
VH CRM
VH CRH
Accuracy
Discharge voltage range
Discharge current resolution
CCL
Discharge time
Resolution
Accuracy
Battery capacity
VL CRL
VL CRM
Resolution
Range
Resolution
Accuracy *4 3%+10us
Battery discharge
Accuracy
Range
Resolution
Accuracy
0.2%+1s
Low range
Resolution
Accuracy
High range
Resolution
Accuracy
High range
Resolution
Accuracy
±(0.05%+0.02%FS)
±(0.05%+0.025%FS)
Current measurement
Low range
Resolution
Voltage measurement
Model
18
DCL‐1000 Series
DCL-1011 DCL-1031 DCL-1032 DCL-1033 DCL-1061 DCL-1062
10Ω 10Ω 5.3Ω 20Ω 5.3Ω 10Ω
165W 315W 315W 315W 630W 630W
0W 0W 0W 0W 0W 0W
1.5A /us 1.5A /us 3A /us 0.75A /us 3A /us 1.5A /us
0.2V /us 0.2V /us 0.2V /us 0.02V /us 0.2V /us 0.02V /us
Open circuit ≥20kΩ ≥20kΩ ≥20kΩ ≥20kΩ ≥20kΩ ≥20kΩ
33A 33A 66A 16.5A 66A 33A
175V 175V 175V 550V 175V 550V
3mA/30mA 3mA/30mA 6mA/60mA 5mA/50mA 6mA/60mA 5mA/50mA
5mV 5mV 5mV 5mV 5mV 5mV
215x89x412mm
5.2kg
Specifications are subject to change without prior notice.
Max. slew rate
Max. input level
Current
Voltage
Accessories
Dimension (WxHxD)
Weight
215x89x412mm
6.7kg
Power cord x1, Operation manual x1, RS-232 cable x1, RS232C to USB cable x1
215x89x507mm
9kg
Transient mode
Frequency range *5
High/Low time
Resolution
Accuracy
Rising/Falling time
Resolution
Accuracy
Step time
Resolution
Accuracy
No. of steps
No. of cycles
Storage
Expanded function
Interface
Operating environment
Storage environment
Power source
RS-232 interface, support SCPI commands, support Labview, RS232 to USB
0~40, ≤85%RH
-10~70, ≤70%RH
AC110V/220V±10% selectable, 50/60Hz
Trigger level
Trigger pulse width
Protection
Trigger input
TTL falling edge
≥20us
General
Over current, over voltage, over power, over temperature and reverse voltage protections
0.2+10us
1~50
0~65535
8 Lists
Chain
250us
0.2%+10us
List Mode
10ms~99999s
10ms
0.01Hz~2kHz
0~99999ms
250us
0.2%+10us
250us~99999ms
Ripple & Noise
Transient operation
Continuous, Pulse, Toggled
Current
Voltage
Current (rms/p-p)
Voltage (rms)
VL CRH
CPV
CPC
Model
19
180W to 375W PSP series are high precision programmable DC power supplies features lowregulation 0.01%, low ripple and noise with 1mVrms, automatic continuous or dynamic loadchange, battery charge function, MPU control, RS‐232/RS‐485/USB interface, etc.
The commands of the PSP series are compliant with SCPI commands. Users can easily developprograms to facilitate different applications in auto test and auto control. Digital input fulfilledby rotary dial and keypad makes input to be fast and accurate. Voltage and current regulationsby software avoids human error and makes the PSP series to be more accurate.
Features
• 0.01% low regulation, high accuracy and high resolution• Over load, over voltage, over current, over temperature and reverse polarity protections• Constant voltage and constant current operations, auto CV and CC switch• Automatic continuous or dynamic load change• 1mVrms low ripple & noise• 4.3-inch backlit Segment LCD display• High speed rotary dial and keypad input• Built-in beeper alarm• Panel lock and output ON/OFF function• List mode function, 100 sets save & recall for voltage and current and time setups• Remote sense function• Low resistance measurement function, display load resistance value• Battery charge mode• Standard RS-232 interface, support SCPI commands, support Labview• RS-232 to USB cable provided• Optional RS-485 interface, support Modbus
180W~375W SINGLE OUTPUT PROGRAMMABLE DC POWER SUPPLY
PSP Series
MODEL VOLTAGE CURRENT
PSP-3605 36V 5A
PSP-6005 60V 5A
PSP-3010 30V 10A
PSP-7505 75V 5A
PSP-1820 18V 20A
PSP-7505
20
Technical SpecificationPSP-3605 PSP-6005 PSP-3010 PSP-7505 PSP-1820
0~36V 0~60V 0~30V 0~75V 0~18V
0~5A 0~5A 0~10A 0~5A 0~20A
0.1~40V 0.1~64V 0.1~34V 0.1~80V 0.1~21V
0.1~5.5A 0.1~5.5A 0.1~11A 0.1~5.5A 0.1~22A
≤1mVrms
≤5mAms
1mV/0.1mA 1mV/0.1mA 1mV/1mA 2mV/0.1mA 1mV/1mA
Voltage 1mV 1mV 1mV 1mV 1mV
Current 0.1mA 0.1mA 1mA 0.1mA 1mA
Voltage
Current
Voltage
Current
Setting accuracy (25±5 )
General
Protection Over load, over voltage, over current, over temperature and reverse polarity protections
Panel lock Provided
Remote sense function Maximum compensation voltage 0.1V@ Maximum output
±(0.05% of reading +5mA) ±(0.05% of reading +10mA) : PSP-1820
O.C.P
Line regulation ≤0.01%+3mV
Line regulation
Load regulation
Load regulation
Ripple & Noise (5Hz~1MHz)
Recovery time ≤100us (50% load change, minimum load 0.5A)
≤1mVrms (I≤3A); ≤2mVrms (I>3A); ≤3mVrms (V≥75V)
Ammeter
Setting resolution
Ripple & Noise
Display
Voltmeter
≤3mArms (I≤3A), ≤6mArms (I>3A)
Reading accuracy (25±5 )
Output
O.V.P
Model
Output
Battery charge Lithium battery curve charge
Rated output (0 ~40 )
Constant Voltage Operation
Constant Current Operation
5 digits LCD display
5 digits LCD display
≤0.2%+3mA (I≤3A); ≤0.2%+5mA (I>3A)
≤0.2%+3mA
≤0.01%+3mV (I≤3A); ≤0.02%+5mV (I>3A)
Reading resolution
±(0.03% of reading + 10mV)
±(0.2% of reading + 10mA) ±(0.2% of reading + 20mA) : PSP-1820
±(0.02% of reading +5mV)
PSP Series
21
PSP-3605 PSP-6005 PSP-3010 PSP-7505 PSP-1820
8kg 8kg 8.5kg 8.5kg 9.8kg
Interface
Panel lock
Remote sense function
Battery charge
Storage environment
Memory
Insulation
Operating environment
-10 ~70 , ≤70%RH
Indoor use Altitude: ≤2000m Ambient temperature: 0~40
Relative humidity: ≤80% Installation category: II Pollution degree: 2
Between base and AC power cord: ≥30MΩ/500VDC
Between base and terminals: ≥20MΩ/500VDC
100 sets
Provided
Protection
Model
Over load, over voltage, over current, over temperature and reverse polarity protections
General
Dimension (WxHxD)
Weight
Power source
Accessories
215x89x352mm
Pow er cord x1, Operation manual x1, RS232 cable x1, Softw are CD x1, Test lead x1
AC110V/220V±10% selectable, 50/60Hz
Optional 0-5V analog control
Optional RS485 interface, support ModBus
RS232 to USB cable
RS232 interface, Support SCPI commands
Lithium battery curve charge
Maximum compensation voltage 0.1V@ Maximum output
PSP Series
PSP-3605 PSP-3010
PSP-6005PSP-1820
22
195W~315W MULTI‐CHANNELPROGRAMMABLE DC POWER SUPPLY
Features
• Two independent adjustable outputs : 0~30V/3A x 2, 0~30V/5A x 2• One fixed output : 2.5V/3.3V/5V(Selectable)-3A• Constant voltage and constant current operations• Digital panel control and Coarse/Fine volume control for voltage and current • 4 sets panel settings of save & recall • Panel lock function and output standby function• Preset voltage and current• Auto Series and Parallel tracking operations• Intelligent cooling fan control• USB Interface for PC control (PS-3303U & PS-3305U)• Support Labview
PS-3303U & PS-3305U PS-3303 & PS-3305
The PS‐3300 series programmable DC power supply are light weight, adjustable, multi‐functional work stations. They have three independent outputs: two with adjustable voltage level and one with fixed level selectable from 2.5V, 3.3V and 5V. The power supply can be used for logic circuits where various output voltage or current are needed, and for tracking mode definition systems where positive and negative voltages with good accuracy are required.
PS‐3300 Series
USB
VOLTAGE CURRENT VOLTAGE CURRENT INTERFACE
PS-3303U 0~30V 0~3A 2.5V/3.3V/5V 3A √PS-3305U 0~30V 0~5A 2.5V/3.3V/5V 3A √PS-3303 0~30V 0~3A 2.5V/3.3V/5V 3APS-3305 0~30V 0~5A 2.5V/3.3V/5V 3A
MODELDUAL OUTPUT FIXED OUTPUT
23
Technical Specification PS‐3300 Series
MODEL PS-3303U & PS-3303 PS-3305U & PS-3305
Output 0-30V/3A x 2 0-30V/5A x 2
Line regulation ≤0.01%+3mV ≤0.01%+3mV
Load regulation ≤0.01%+3mV ≤0.02%+5mV
Recovery time
Ripple & Noise ≤1mV rms ≤2mV rms
Temperature co-efficient
Line regulation ≤0.2%+3mA ≤0.2%+3mA
Load regulation ≤0.2%+3mA ≤0.2%+5mA
Ripple & Noise ≤3mA rms ≤6mA rms
Line regulation ≤0.01%+3mV ≤0.01%+3mV
Load regulation ≤0.01%+5mV ≤0.02%+10mV
Line regulation
Load regulation
Regulation
Ripple & Noise
Output voltage
Output current
Ammeter
Voltmeter
Display resolution
V : ±(0.5% of reading + 2digits) V : ±(0.5% of reading + 2digits
A: ±(0.5% of reading + 2digits) A : ±(0.5% of reading + 5digits)
V : ±(0.5% of reading + 2digits) V : ±(0.5% of reading + 2digits
A : ±(0.5% of reading + 2digits) A : ±(0.5% of reading + 5digits)
Dimension
Net Weight Approx. 7.5kg Approx. 10.0kg
32.0V full scale, 3 digits 0.5” LED display
Voltmeter: 100mV Ammeter: 10mA
Saving accuracy
Readback accuracy
300 x 220 x 148mm
InsulationBetween base and output terminal≥20MΩ/500VDC
Between base and power cord≥30MΩ/500VDC
Display
3.20A full scale, 3 digits 0.5” LED display
Line regulation≤25mV, Load regulation≤25mV
≤2mV rms
2.5V, 3.3V, 5V (selectable), ±8%
3A
ProtectionOver voltage, over current, over load, over temperature, current limit,
short circuit and reverser polarity protections.
Constant voltage operation
≤100us
Slave tracking error: ≤0.5%+10mV of the master
(No load. With load, add load regulation≤300mV)
CH3 output
≤300mV
Positive and Negative Supply
≤300PPm/
Constant current operation
Tracking parallel
Tracking serial
≤0.01%+5mV
24
115W~205W TRIPLE OUTPUT LINEAR DC POWER SUPPLY
Features • Output Voltage & Current : two variable & one fixed• Constant voltage and current operation• Each output has a readout for voltage and current (3 digit red LED display)• Indicators for constant voltage, constant current and overload operation• Coarse and fine voltage controls for accurate voltage and current settings• Excellent load, line and ripple specifications• Built-in current limiting circuit• Short Circuit and overload protection• Series, Parallel & Tracking Operation• Output polarity : (+), (-), GND, positive or negative
Our DC power supplies are the ideal DC sources for Lab, Service, Industrial or Educational applications. They are designed with an energy saving circuit for cooler. More reliable and efficient operation is performed at all output levels. All our power supplies have short circuit and overload protection providing full proof operation for any applications.
P‐3000 Series
25
P-3035T
P-3625T
PS-3015TRP
VOLTAGE CURRENT VOLTAGE CURRENT
P-3035T 0~30V 0~3A 5V 3A
P-3625T 0~36V 0~2.5A 3.3V/5V 5A
PS-3015TPR 0~30V 0~1.5A 5V 5A
MODELDUAL OUTPUT FIXED OUTPUT
Technical Specification P‐3000 Series
P-3035T P-3625T PS-3015TPR
0~30V Dual5V Fixed
0~36V Dual 3.3V/5V Fixed
0~30V Dual 5V Fixed
0~3A Dual 3A Fixed
0~2.5A Dual 5A Fixed
0~1.5A Dual 5A Fixed
Constant voltage
characteristics
(CV mode)
Constant current
characteristics
(CC mode) 3mA 3mA 2mA
5V ±2.5% 3.3V/5V ±2.5% 5V ±2.5%
3A ±2.5% 5A ±2.5% 5A ±2.5%
Type
Accuracy
Resolution
Type
Accuracy
Resolution
Fan Fan Free Air
400VA-310W 400VA-300W 230VA-175W
Approx. 7.5Kg Approx. 9.5Kg Approx. 7.5Kg
2mVrms
0.1%±5mV
234 x 160 x 326mm
8mV
8mV
0.5mV
3mA
10mA
±200V
30MΩ@ DC 500V : AC input to Chassis
20MΩ@ DC 500V : Chassis to input terminal
±(0.5%+10mV) of master supply
3 digits Red LED
± (0.2% rdg + 2digits)
100mV
3 digits Red LED
Instruction manual, Power Cord, Test lead
Power Consumption
AC 115/230V Selectable
± (1.0% rdg + 3digits)
10mA
Green LED : CV, Red LED : CC
0 ~ 35 , 10 ~ 80% RH
-20 ~ 60 , 10 ~ 85% RH
Insulation Resistance
Input power Supply
Dimensions
Load regulation
Ripple and noise
Input regulation
Load regulation
Ripple and noise
Model
Output
Voltage
Current
Input regulation
Fixed output
Voltage
Current
Ripple and noise
Line & Load Regulation
Tracking Error (Slave)
Display
Voltmeter
Ammeter
LED Indicators
Temperature
Operating Temperature
Storage Temperature
Cooling Method
Max Voltage to Ground
Accessories
Weight
26
195W~315W TRIPLE OUTPUT LINEAR DC POWER SUPPLY
Features
• Triple outputs : 0~30V/0~3A Dual - 5V/3A Fixed (PS-2303)0~30V/0~5A Dual - 5V/3A Fixed (PS-2305)
• Over current protection• Constant voltage & constant current, low ripple & noise, and low temperature drift• Preset current limit point• In the tracking mode, two outputs are automatically connected in series or parallel
without extra cables.• In series mode, the instrument can be connected as positive and negative supplies. • Multi-tune potentiometer and easy to set up voltage• Output standby function• Overload protection
The PS‐2300 series are linear DC power supplies with 3 channels, 180W to 300W output. In constant voltage and current operations, the power supply provides high regulation and low ripple & noise. Auto series and parallel operations double output voltage and current.
The output ON/OFF control and preset voltage & current function protect the power supply and related loads from unexpected damages. The PS‐2300 series are widely used in applications of powering operational amplifier, push pull stages, logic circuit and definition systems.
PS-2305
PS‐2303 & PS‐2305
PS-2303
VOLTAGE CURRENT VOLTAGE CURRENT
PS-2303 0~30V 0~3A 5V 3A
PS-2305 0~30V 0~5A 5V 3A
MODELDUAL OUTPUT FIXED OUTPUT
27
Technical Specification PS‐2303 & PS‐2305
Model PS-2303 PS-2305
Output voltage 0~30Vx2, fixed 5V 0~30Vx2, fixed 5V
Output current 0~3A, fixed 3A 0~5A, fixed 3A
Load regulation ≤0.01%+3mV ≤0.01%+3mV
Line regulation ≤0.01%+3mV ≤0.02%+5mV
Recovery time
Ripple & Noise ≤1mV rms ≤2mV rms
Temperature co-efficient
Load regulation
Line regulation
Ripple & Noise
Line regulation: ≤0.01%+3mV Line regulation: ≤0.01%+3mV
Load regulation: ≤0.01%+3mV Load regulation: ≤0.02%+5mV
Output accuracy
Max.output current
Line regulation
Load regulation
Ripple & noise
Protection
Voltmeter display range 30V 30V
Display resolution
Display accuracy
Ammeter display range 3A 5A
Display resolution
Display accuracy
Display mode
Power source
Operating environment
Storage environment
Dimension
Weight 8.0KG 10KG
AC110V/220V, 50/60Hz
5~40, <80%
-10~70, <80%
245W*140H*345Dmm
≤15mV
≤2.0mVrms
Current limit and short circuit protections
Display
100mV
±0.5%+2d
10mA
±0.5%+2d
3 1/2 digit LED display
3A
≤15mV
Constant current operation
≤0.2%+3mA
≤0.2%+3mA
≤3mA rms
Tracking operation
Parallel
Serial
Line regulation: ≤0.01%+5mV
Load regulation: ≤300mV
Slave error: ≤0.5%+10mV, master without load (with load, add load regulation≤300mV)
Constant voltage operation
≤100us
≤300ppm/
Fixed output 5V/3A
5V±0.25V
28
• Built-in digital numeric display • Output : 0~30V/0~3A Dual• Constant voltage and current operation• Indicators for constant voltage, constant
current and overload operation • Low Power Consumption• Built-in current limiting circuit• coarse and fine voltage controls for
accurate voltage and current setting• Output polarity : (+), (-), GND,
positive or negative
180W DUAL OUTPUT LINEAR DC POWER SUPPLY
Features
PS‐3030DU
Technical Specification 0 ~ 30 V Dual
0 ~ 3 A Dual
Constant voltage 8mV
characteristics 8mV
(CV mode) 0.5mV rms
Constant current 4mA
characteristics 10mA
(CC mode) 3mA rms
Type 3 digits red LED
Accuracy ±(0.2% Rdg. + 2 digits)
Resolution 100mV
Type 3 digits red LED
Accuracy ±(1.0% Rdg. + 3 digits)
Resolution 10mA
Green LED : CV, Red LED : CC
30MΩ@DC500V : AC input to Chassis
20MΩ@DC500V : Chassis to input terminal
±200V
0 to 35 , 10 to 80% RH
-20 to 60 , 10 to 85% RH
Cooling Method
Free Air
AC115V/230V selectable
400VA / 320W
234 x 160 x 326mm(W×H×D), Approx. 7.5Kg
OutputVoltage
Current
Line regulation
Load regulation
Ripple and noise
Line regulation
Load regulation
Ripple and noise
Display
Voltmeter
Ammeter
LED Indicator
Insulation resistance
Dimensions & weight
Temperature
Input PowerPower
MAX. Voltage to ground
Operating TemperatureStorage TemperatureCooling Method
Power Consumption
Storage temp. and humidity range
29
180W~300W DUAL OUTPUT LINEAR DC POWER SUPPLY
Features
Technical Specification
• Two independent adjustable outputs - PS-303DU : 0~30V x 2, 0~3A x 2- PS-305DU : 0~30V x 2, 0~5A x 2
• Constant voltage and constant current operations
• Low ripple & noise and low temperature drift• Auto Series and Parallel tracking operations • Output ON/OFF control • Over load and reverse polarity protections
PS‐303DU & PS‐305DU
Model PS-303DU PS-305DU
Output voltage 0~30V x 2 0~30V x 2Output current 0~3A x 2 0~5A x 2
Load regulation ≤0.01%+3mV ≤0.01%+3mVLine regulation ≤0.01%+3mV ≤0.02%+5mVRecovery timeRipple & Noise ≤1mV rms ≤2mV rmsTemperature co-efficient
Load regulationLine regulationRipple & Noise
Line regulation: ≤0.01%+3mV Line regulation: ≤0.01%+3mVLoad regulation: ≤0.01%+3mV Load regulation: ≤0.02%+5mV
Voltmeter display range 30V 30VDisplay resolutionDisplay accuracyAmmeter display range 3A 5ADisplay resolutionDisplay accuracyDisplay modePower sourceOperating / Store environmentDimensionWeight 8.0KG 9.0KG
AC110V/220V, 50/60Hz5 ~40 , <80%RH / '-10 ~70 , <70%RH
260W*160H*330Dmm
Display
100mV±0.5%+2 digits
10mA±0.5%+2 digits
3 1/2 digit LED display
≤3mA rms, ≤6mA rmsTracking operation
Parallel
Serial
Line regulation: ≤0.01%+5mVLoad regulation: ≤300mV
Tracking error: ≤0.5%+10mV of the master, no load ( with load, add load regulation ≤300mV)
Constant voltage operation
≤100us
≤300ppm/Constant current operation
≤0.2%+3mA, ≤0.02%+5mA≤0.2%+3mA
30
180W~250W SINGLE OUTPUTLINEAR DC POWER SUPPLY
Features
Technical Specification
PS‐3060/PS‐6030/PS‐5050
• Built-in digital numeric display • Output : 0~30V/0~6A, 0~60V/0~3A & 0~50V/0~5A• Constant voltage and current operation• Low Power Consumption• Built-in current limiting circuit• coarse and fine voltage controls for
accurate voltage and current setting• Output polarity : (+), (-), GND,positive or negative
31
Model PS-3060 PS-6030 PS-5050
Output Voltage 0 ~ 30 V 0 ~ 30 V 0 ~ 50 V
Output Current 0 ~ 6 A 0 ~ 6 A 0 ~ 5 A
Input regulation 5mV 8mV 12mV
Load regulation 5mV 8mV 12mV
Ripple and noise
Temperature coefficient
Input regulation 6mA 3mA 5mA
Load regulation 15mA 15mA 15mA
Ripple and noise 3mA rms 2mA rms 3mA rms
Temperature coefficient
Voltmeter indication
Accuracy
Ammeter indication
Accuracy
Between chassis and Input power supplyBetween chassis and output terminal Output polarity
Operating& Storage Temperature & Humidity
Ground proof voltage
Input power Supply
Approx. 10Kg Approx. 10Kg Approx. 15Kg
Insulation Resistance
Constant Voltage Operaiton
Constant Current Operation
Digital Meter Indication
1mV rms, 4mV P-P
100ppm/°C Typical
210 x 163 x 347mmDimensions & weight
DC500V 30MΩ
DC500V 20MΩ
AC100V/120V/220V/230V selectable, 50/60Hz
+(RED), -(BLACK), GND(GREEN), positive or negative grouding
0 ~ 40 , 10 ~ 80% RH / -20 ~ 60 , 10 ~ 85% RH
±200V
250ppm/°C Typical
Red 3-digit LED, Max 99.9V, fixed range
Output ON : ± (0.2% rdg + 2digits)
Red 3-digit LED, Max 99.9V, fixed range
Output ON : ± (1.0% rdg + 3digits)
90W~150W SINGLE OUTPUT LINEAR DC POWER SUPPLY
Features
Technical Specification
PS‐303 & PS‐305
• Built-in digital numeric display • Output : 0~30V/0~3A & 0~30V/0~5A • Constant voltage and current operation• Low Power Consumption• Built-in current limiting circuit• Coarse and fine voltage controls for accurate
voltage and current setting• Output polarity : (+), (-), GND, positive or negative
32
Model PS-303 PS-305
Output Voltage 0 ~ 30 V 0 ~ 30 V
Output Current 0 ~ 3 A 0 ~ 5 A
Input regulation 8mV 8mV
Load regulation 8mV 8mV
Ripple and noise 0.5mV rms, 4mV P-P 0.5mV rms, 4mV P-P
Input regulation 4mA 8mA
Load regulation 10mA 20mA
Ripple and noise 3mA rms 5mA rms
Voltmeter indication
Accuracy
Ammeter indication
Accuracy
Between chassis and Input power supply
Between chassis and output terminal
Output polarity
Operating & Storage Temperature/ Humidity
Ground proof voltage
Input power Supply
Dimensions
Weight Approx. 5Kg Approx. 5.5Kg
DC500V 20MΩ
+(RED), -(BLACK), GND(GREEN), positive or negative grouding
0 ~ 35 , 10 ~ 80% RH / -20 ~ 60 , 10 ~ 85% RH
±200V
AC115V/230V selectable
124 x 160 x 326mm
Red 3-digit LED, Max 99.9V, fixed range
Output ON : ± (0.2% rdg + 2digits)
Red 3-digit LED, Max 99.9V, fixed range
Output ON : ± (1.0% rdg + 3digits)
Insulation Resistance
DC500V 30MΩ
Constant Voltage Operaiton
Constant Current Operation
Digital Meter Indication
90W~300W SINGLE OUTPUT LINEAR DC POWER SUPPLY
Features
Technical Specification
• Two digital panel meters• Constant voltage and constant current operation• High efficiency, light and compact design• Preset current limit point• Output standby function• Overload and Reverse polarity protections
33
PS-3010
PS-1303/1305/1603
Model PS-1303 PS-1305 PS-1603 PS-3010
0-30V Variable 0-30V Variable 0-60V Variable 0-30V Variable
5V Fixed 5V Fixed 5V Fixed
0~3A Variavle 0~5A Variable 0~3A Variable 0~10A Variable
1A Fixed 1A Fixed 1A Fixed
Line regulation ≤0.01%+5mV
Load regulation ≤0.01%+3mV ≤0.02%+5mV ≤0.02%+5mV ≤0.02%+5mV
Recovery time
Ripple & Noise
Line regulation
Load regulation ≤0.2%+10mA
Ripple & Noise
Voltmeter display range 60V 30V
Display resolution
Display accuracy
Ammeter display range 3A 5A 3A 10A
Display resolution
Display accuracy
Display mode
Power source
Operating environment
Storage environment
Dimension 255 x 155 x 375 mm
Net Weight Approx. 4kg Approx. 5.6kg Approx. 5.6kg Approx. 9kg
≤2mV rms
Output Voltage
Output Current
≤0.01%+3mV
100mV
10mA
3 1/2 digit LED display
-10~70, <80%
165 x 130 x 330 mm
AC110V/220V, 50/60Hz
5~40, <80%
Constant current operation
Constant voltage operation
≤0.2%+3mA
≤3mA rms
Display
0.5% reading + 2 digits
1% reading + 2 digits
≤100us(50% load change, minimum load 0.5 A)
≤0.2%+3mA
30V
VOLTAGE CURRENT VOLTAGE CURRENTPS-1303 0~30V 0~3A 5V 1APS-1305 0~30V 0~5A 5V 1APS-1603 0~60V 0~3A 5V 1APS-3010 0~30V 0~10A
MODELVARIABLE OUTPUT FIXED OUTPUT
200W~100KW AC POWER SOURCE
Applications
• P.A.M (Power Amplifier Modulation) Type• CPU control• Digital control• Less than 1% Distortion• Constant voltage stability : ≤ ±0.2%• Constant frequency stability : ±0.01%• Overload protection• Remote control using RS-232C (Optional)
• Multi-P.W.M (Pulse Width Modulation) Type• Digital Control• I.G.B.T high frequency switch• Constant voltage stability : ≤ ± 0.5%• Constant frequency stability : ± 0.5%• Remote control using RS-232C (Optional)
• Multi-P.W.M (Pulse Width Modulation) Type• Digital control• I.G.B.T high frequency switch• High efficiency & low audible noise• Constant voltage stability : ≤ ± 1%• Constant frequency stability : ± 0.1%• Remote control using RS-232C (Optional)
ACP-PAM Series
ACPF-MPWM Series
AFC-MPWM Series
Features
• Development, Production, Test, etc. for electric & electronic equipment
• Frequency Conversion in various laboratories
• Motor Testing• Air Conditioner Testing
• Power Supply Testing• General Laboratory• Transformer Testing • Magnetic Testing• Reliability Testing• Standard AC power source
34
ACP / ACPF / AFC Series
MODEL OUTPUT VOLTGAGE VOLTAGE STABILITY OUTPUT FREQUENCY FREQUENCY STABILITY
ACP series 0~300V
(option : 0~700V)≤ ± 0.2%
50,60,400,40~999Hz(option : 10~5000Hz)
± 0.01%
ACPF series 0~300V ≤ ± 0.5% 50,60,45~500Hz ± 0.5%AFC series 0~300V ≤ ± 1.0% 50,60,45~65Hz ± 0.1%
Technical Specification
Model # Combination
35
ACP / ACPF / AFC Series
ACP / ACPF / AFC ACP-300 ACP-500 -1K -2K -3K -5K -7.5K
Output Capacity 300VA 500VA 1KVA 2KVA 3KVA 5KVA 7.5KVA
ACP / ACPF / AFC -10K -15K -20K -30K -50K -75K -100K
Output Capacity 10KVA 15KVA 20KVA 30KVA 50KVA 75KVA 100KVA
Model ACP series ACPF series AFC series
Circuit Type P.A.M
(Power Amplifier Modulation)M.P.W.M
(Multi-Pulse Width Modulation)M.P.W.M
(Multi-Pulse Width Modulation)
Input Voltage
Input Frequency
Output Voltage 0~300V (option : 0~700V)
1PHASE or 3PHASE(Option)0~300V
1PHASE or 3PHASE (option)0~300V
1PHASE or 3PHASE (option)
Voltage Stability ≤ ±0.2% ≤ ±0.5% ≤ ±1%
Output Frequency 50,60,400,40~999 (option : 10~5000 )
50,60,45~500 Variable 50,60,45~65 Variable
Frequency Stability ±0.01% ±0.5% ±0.1%
T.H.D ≤ 1% ≤ ±3% ≤ ±3%
Protector
Frequency Meter
V.A-Meter
Temperature
Humidity
Output Wave
Optional Remote Control
True Sine Wave
Remote Control Function(RS-232C : Variable Voltage)Remote Multi-control (RS-485)
100V / 110V / 115V / 120V / 200V / 220V / 230V / 240V / 380V / 440V,1PHASE or 3PHASE(Option) (±10%)
50 / 60
Electronic Circuit / Over Load / Short Circuit
LED Digital Display
True RMS LED Digital Display
0~40
0~90%
25MHz~60MHz ARBITRARY WAVEFORM FUNCTION GENERATOR
Features
• Frequency range 1μHz~25MHz/40MHz/60MHz• 2 independent output channels at same frequency range for main waveforms• 4.5-inch TFT LCD display• Min. output amplitude 1mVpp (50Ω), total distortion 0.2%• Sampling rate 150MSa/s, vertical resolution 14 bits, waveform length 16k points• 6 standard waveforms, 50 built-in waveforms and 12 user-defined arbitrary waveforms• 10 sets save & recall for operating parameters• Modulations: AM, DSSC AM, FM, PM, ASK, FSK, BPSK• Synchronous output, external modulation input, trigger input, external reference input
and count input• Linearity/Logarithmic sweep signal and Burst signal• Channel coupling, parameter (frequency, amplitude, offset, phase) coupling and
point frequency replication tracking• Strong arbitrary waveform building software & support SCPI commands• Over voltage, over current, short circuit and reverse voltage protections• Standard interface: RS232, USB device, USB Host
36
The AFG‐2000 series arbitrary waveform/function generators with maximum frequency of 25MHz, 40MHz and 60MHz were designed based on Direct Digital Synthesis (DDS) technology providing high fidelity, low jitter performance function signal and arbitrary waveform signal.
The AFG‐2000 series are equipped with 150MSa/s sampling rate, 14 bits vertical resolution, ±1ppm high stability and high accuracy waveform output, 250MHz frequency counter as well as digital modulations of AM, DSSC AM, FM, PM, ASK, FSK, BPSK. Built‐in USB device, USB host and RS232 interface supports easy remote control. 4.3‐inch TFT LCD display, user‐friendly interface design and keyboard layout bring excellent operation experience for users.
AFG-2060AFG-2040
AFG-2025
AFG‐2025/2040/2060
37
Technical Specification AFG‐2025/2040/2060
AFG-2025 AFG-2040 AFG-2060
Sine 1μHz ~ 25MHz 1μHz ~ 40MHz 1μHz ~ 60MHz
Square 1μHz ~ 5MHz 1μHz ~ 10MHz 1μHz ~ 15MHz
Ramp 1μHz ~ 500kHz 1μHz ~ 1MHz 1μHz ~ 1MHz
Pulse 1μHz ~ 5MHz 1μHz ~ 10MHz 1μHz ~ 15MHz
Noise
Arbitrary
Total distortion
Square Rise/fall edge
Pulse Duty cycle & Edge jitter
Ramp Symmetry & Non-linearity
Noise Repeat cycle
Sampling rate
Vertical resolution
CHB range
Flatness (1kHz)
CHA level range
CHA accuracy
CHB accuracy
AM modulation depth
FM modulation deviation
PM modulation range
FSK
BPSK
ASK
Sweep mode & time
Trigger source
Mode & Interval time
Burst numbers
Pulse Pulse width
Overshoot & Edge jitter
18ns
0.1% ~ 99.9%, ≤150ps rms
0.0% ~ 100.0%, ≤0.1%, 5%~95% of signal
0.1Hz~250 MHz, 6 digits/s
Interface USB Device, USB Host, RS232
Power cord x1, Operation manual x1, Software CD x1, USB cable x1, RS-232 cable x1, BNC-BNC cable x1, Test lead x1
>50 years
Arbitrary1μSa/s ~ 50MSa/s
14 bits
Resolution & Accuracy 1μHz, ≤±5×10-5
Waveform
Model
Output Frequency
Range
30MHz white noise (-3dBm)
1μHz ~ 6.5MHz
Output waveform Sine, Square, Ramp, Pulse, Noise, Arb, DC
Waveform length 8~16384 points (CHA), 8~2048 point (CHB)
Vertical resolution & Sampling rate 14 bits, 150MSa/s
SineHarmonics distortion
< -70dBc, < 20kHz < -50dBc, 20kHz ~ 1MHz
< -40dBc, 1MHz ~ 30MHz < -30dBc, 30MHz ~ 60MHz
≤0.2% (20Hz ≤ f ≤100 kHz)
Output Characteristics
Amplitude
CHA rangeHigh impedance : 2mVpp~20Vpp ≤20MHz 2mVpp~10Vpp ≤60MHz
50Ω : 1mVpp~10Vpp ≤20MHz 1mVpp~5Vpp ≤60MHz
High impedance : 2mVpp~6Vpp ≤60MHz 50Ω : 1mVpp~3Vpp ≤60MHz
±0.1dB (<100kHz), ±0.3dB (100kHz ~ 10MHz) , ±0.5dB (10MHz ~ 60MHz)
Offset
High impedance : ±(10V DC~AC peak/2) 50 Ω : ±(5 VDC~AC peak/2)
50 Ω : ±(94.7 mV DC –AC peak/2)
±1% offset setting value ±0.25% amplitude setting value ±2mV
±1% offset setting value ±0.25% amplitude setting value ±3mV
CHB level rangeHigh impedance : ±(189.3 mV DC–AC peak/2)
Modulation
0.0%~120.0%
0 ~fc/2
0.0°~360.0°,
1μHz~Fsinemax (Sine), 1μHz~15MHz (Square/Pulse), 1μHz~1MHz (Ramp)
0.0°~360.0°
2mVpp~ 20Vpp
Dimension Chassis: 260Wx110Hx385D mm Instrument: 295Wx195Hx415D mm
Weight 4kg
Sweep
Burst
Frequency Counter range & resolution
Linearity/Logarithmic, 0.001s~1000s
Int/Ext/Bus, 1μ ~1000S, resolution 1μS
N Cycle/Gated
1~1000000, resolution 1
Power source AC100~240V, 47~63Hz, Max. 30VA
Accessories
28.5 ns ~ period - 28.5 ns
≤2%(CHA) (50Ω), ≤150ps rms
10MHz~20MHz ARBITRARY WAVEFORM &DDS FUNCTION GENERATOR
Features
38
The AFG‐1000 series arbitrary waveform/function generators with maximum frequency of 10MHz and 20MHz are designed based on Direct Digital Synthesis (DDS) technology providing flexible performance and system features for basic scientific and industrial requirements. The 8 bits resolution, 100MSa/s sampling rate, 1024 pts memory length, 32 built‐in waveforms and 8 user‐defined arbitrary waveforms create various waveforms for different needs.
The AFG‐1000 series have additional functions of multiple modulations FM, FSK, ASK and PSK, 200MHz external frequency counter, 40 sets memories and multiple protections. Stable output frequency, high accuracy and low distortion make TFG3600E series an ideal solution for an accurate and affordable signal source for industrial, scientific research and educational applications.
• Max. output frequency of 10MHz & 20MHz• 2 output channels• 3.5-inch TFT LCD display• Direct Digital Synthesis technology (DDS)• Min. output amplitude 1mV (50Ω) with good stability• Sampling rate 100MSa/s, vertical resolution 8 bit, waveform length 1024 points• Arbitrary waveform function (AFG-1010 & AFG-1020)• 32 built-in waveforms and 8 user-defined arbitrary waveforms• 40 sets save & recall for panel settings• Modulations: FM, FSK, ASK, PSK• Frequency sweep, amplitude sweep, burst and TTL output functions• Over voltage, over current, short circuit and reverse voltage protections• High speed rotary dial and keypad input• Standard RS-232 interface for PC remote control• Standard 200MHz external frequency counter
DFG-1010 & DFG-1020 AFG-1010 & AFG-1020
DFG‐1010/1020 & AFG‐1010/1020
39
Technical Specification DFG‐1010/1020 & AFG‐1010/1020
DFG-1010 DFG-1020 AFG-1010 AFG-1020
1μHz~10MHz 1μHz~20MHz 1μHz~10MHz 1μHz~20MHz
Harmonic distortion
Total distortion
Rise/fall time
Overshoot
Duty cycle
Sine 1μHz~10MHz 1μHz~20MHz 1μHz~10MHz 1μHz~20MHz
Square
Other
Resolution
Accuracy
Stability
Flatness
Output impedance
Range
Resolution
Accuracy
1%~99%
Frequency
≥40dBc (<1MHz); ≥35dBc (1~20MHz)
≤1% (20Hz~200kHz)
Model
Output frequency
Waveform
Output waveform32 built-in waveforms, including Sine, Square, Triangle, Ramp, Pulse, etc.
Waveform length 1024 points
Vertical resolution 8 bits
Sampling rate 100MSa/s
Sine
Stability ±5x10-6 /3hoursOutput characteristics
Resolution
Range 1μHz~5MHz
1μHz~1MHz
1μHz
Accuracy ±5x10-5
Square
≤35ns
≤10%
Offset
±10V (open circuit, attenuation 0 dB)
20mVdc
±(1%+20mVdc)
Sweep
Amplitude
Range
2mVpp~20Vpp (open circuit, ≤10MHz)
2mVpp~15Vpp (open circuit, 10MHz~15MHz)
2mVpp~8Vpp (open circuit, 15MHz~20MHz)
20mVpp (amplitude>2Vpp); 2mVpp (amplitude<2Vpp)
±(1%+2mVrms) (open circuit, 1kHz, sine)
±0.5% /3hours
±5% (<10MHz); ±10% (>10MHz)
50Ω
Direction Up, Down, Up-Down
Mode Linearity, Logarithmic
Control Auto sweep or manual sweep
Parameter Frequency, Amplitude
Range Free to set start and stop point
Time 100ms~900s
Deviation 0%~20%
Frequency Modulation (FM)
Carrier signal CHA signal
Modulating signal CHB or external signal
8 user-defined arbitrary waveforms
40
DFG‐1010/1020 & AFG‐1010/1020
DFG-1010 DFG-1020 AFG-1010 AFG-1020
32 built-in waveforms, including Sine, Square, Triangle, Ramp, Pulse, etc.
CHB output characteristics
Burst
Carrier signal CHA signal
Trigger signal
Burst counts 1~65000 cycles
Internal TTL, External, Single
Output waveform
Model
Alternative rate 10ms~60s
Trigger source
Vertical resolution
Trigger source
Waveform
Frequency 10mHz~1MHz
Amplitude TTL, CMOS compatible, low<0.3V, high>4V
Amplitude range
CHB signal
TTL_B signal
1~65000 cycles
Internal TTL, External, Single
Burst counts
TTL_A signal
8 user-defined arbitrary waveforms
1024 points
8 bits
12.5MSa/s
Sine: 1μHz~1MHz; Other: 1μHz~100kHz
TTL output
Square, rise/fall time ≤20ns
ASK Free to set the hop amplitude and the carrier amplitude
PSK Hop phase: 0~360°, resolution: 1°
260x110x385mm
3.5kg
Interface
Operating environment
Weight
Dimension (WxHxD)
Key operation for all functions, Menu display, Rotary dial adjustment
Frequency range
Frequency resolution
Frequency accuracy
1μHz
±1x10-5
0~40, <80%RH
Power source AC110V/220V±10% selectable, 50/60Hz, Max. 45VA
Power cord x1, Operation manual x1, Software CD x1, RS-232 cable x1, Accessories
BNC-BNC cable x1, Test lead x1
3.5-inch TFT LCD
RS-232 interface
Frequency counter
1Hz~200MHz
100mVpp~20Vpp
Frequency range
General
Amplitude resolution
Display
Input amplitude
Operation characteristics
Carrier signal
Trigger signal
Output impedance
50mVpp~20Vpp (open circuit)
20mVpp
50Ω
Sampling rate
Shift Keying
FSK Free to set the hop frequency and the carrier frequency
CHB signal is used as burst signal
Waveform length
5MHz~20MHz LOW‐COST DDS FUNCTION GENERATOR
Features
• Max. output frequency of 5MHz/10MHz/20MHz• 2 output channels• Direct Digital Synthesis technology (DDS)• Min. output amplitude 1mV (50Ω) with good stability• Sampling rate 100MSa/s, vertical resolution 8 bits and waveform length 1024 points• 32 built-in waveforms• 40 sets save & recall for panel settings• Modulations: FM, FSK, ASK, PSK• Frequency sweep, amplitude sweep, burst and TTL output functions• Over voltage, over current, short circuit and reverse voltage protections• High speed rotary dial and keypad input• Standard 200MHz external frequency counter• RS-232 interface for PC remote control• RS232 cable & RS232 to USB cable provided
41
The DFG‐2000 series LOW‐COST function generators with maximum frequency of 5MHz, 10MHz and 20MHz were designed based on Direct Digital Synthesis (DDS) technology providing flexible performance and system features for basic scientific and industrial requirements. These models are equipped with 8 bit resolution, 100MSa/s sampling rate, 1024 pts memory length and 32 built‐in waveforms for various waveforms for different needs.
The DFG‐2000 series have additional functions of multiple modulations of FM, FSK, ASK and PSK, 200MHz external frequency counter, 40 sets memories and multiple protections. Low‐cost, stable output frequency, high accuracy and low distortion make DFG‐2000 series an ideal solution for an accurate and affordable signal source for industrial, scientific research and educational applications.
DFG-2020DFG-2010
DFG-2005
DFG‐2005/2010/2020
42
Technical Specification
DFG-2005 DFG-2010 DFG-2020
1μHz~5MHz 1μHz~10MHz 1μHz~20MHz
Harmonic distortion
Total distortion
Rise/fall time
Overshoot
Duty cycle
Sine 1μHz~5MHz 1μHz~10MHz 1μHz~20MHz
Square
Other
Resolution
Accuracy
Stability
Flatness
Output impedance
Range
Resolution
Accuracy
Model
Output frequency
Waveform
Output waveform 32 built-in waveforms, including Sine, Square, Triangle, Ramp, Pulse, etc.
Sine≥40dBc (<1MHz); ≥35dBc (1~20MHz)
≤1% (20Hz~200kHz)
Square
≤35ns
≤10%
1%~99%
Waveform length 1024 points
Vertical resolution 8 bits
Sampling rate 100MSa/s
Accuracy ±5x10-5
Stability ±5x10-6 /3hoursOutput characteristics
Frequency
Range 1μHz~5MHz
1μHz~1MHz
Resolution 1μHz
Offset
±10V (open circuit, attenuation 0 dB)
20mVdc
±(1%+20mVdc)
Sweep
Amplitude
Range
2mVpp~20Vpp (open circuit, ≤10MHz)
2mVpp~15Vpp (open circuit, 10MHz~15MHz)
2mVpp~8Vpp (open circuit, 15MHz~20MHz)
20mVpp (amplitude>2Vpp); 2mVpp (amplitude<2Vpp)
±(1%+2mVrms) (open circuit, 1kHz, sine)
±0.5% /3hours
±5% (<10MHz); ±10% (>10MHz)
50Ω
Direction Up, Down, Up-Down
Mode Linearity, Logarithmic
Control Auto sweep or manual sweep
Parameter Frequency, Amplitude
Range Free to set start and stop point
Time 100ms~900s
Deviation 0%~20%
Frequency Modulation (FM)
Carrier signal CHA signal
Modulating signal CHB or external signal
DFG‐2005/2010/2020
DFG‐2005/2010/2020
DFG-2005 DFG-2010 DFG-2020
Weight 3.5kg
Standard accessoriesPower cord x1, Operation manual x1, BNC-BNC cable x1, Test lead x1,Software CD x1, USB Cable x1, RS-232 cable x1
Dimension (WxHxD) 260x110x385mm
Interface Optional RS-232 interface
0~40, <80%RH
Power source AC110V/220V±10% selectable, 50/60Hz, Max. 45VA
Operating environment
Operation characteristics Key operation for all functions, Menu display, Rotary dial adjustment
Display Mono LCD
Frequency counter
Frequency range
Input amplitude
1Hz~200MHz
100mVpp~20Vpp
Output impedance
CHB signal is used as burst signal
±1x10-5
50mVpp~20Vpp (open circuit)
Carrier signal
Trigger signal
Burst counts
Trigger source
General
Frequency
Amplitude
Square, rise/fall time ≤20ns
10mHz~1MHz
TTL, CMOS compatible, low<0.3V, high>4V
TTL_B signal
1~65000 cycles
Internal TTL, External, Single
TTL output
Waveform
50Ω
CHB signal
Frequency accuracy
Amplitude range
Frequency resolution 1μHz
20mVpp
1024 points
8 bits
12.5MSa/s
Sine: 1μHz~1MHz; Other: 1μHz~100kHz
Amplitude resolution
CHB output characteristics
32 built-in waveforms, including Sine, Square, Triangle, Ramp, Pulse, etc.Output waveform
Waveform length
Vertical resolution
Sampling rate
Frequency range
Shift Keying
FSK Free to set the hop frequency and the carrier frequency
Burst counts
Trigger source
CHA signal
TTL_A signal
1~65000 cycles
Internal TTL, External, Single
ASK Free to set the hop amplitude and the carrier amplitude
PSK Hop phase: 0~360°, resolution: 1°
Alternative rate 10ms~60s
Burst
Carrier signal
Trigger signal
Model
43
40MHz ~ 60MHz DDS FUNCTION GENERATOR
Features
44
The DFG‐2040 & DFG‐2060 DDS function generators with high frequency of 40MHz and 60MHz are designed based on Direct Digital Synthesis (DDS) technology providing flexible performance and system features for basic scientific and industrial requirements.
The10 bits resolution, 180MSa/s sampling rate, 16k pts memory length, and 32 built‐in waveforms create various waveforms for different needs. PC software for USB and RS‐232 interfaces control and 200MHz frequency counter are provided.
These models have additional functions of multiple modulations FM, AM, FSK, ASK and PSK, 40 sets memories and multiple protections. Low‐cost, multi‐functional, high accuracy and low distortion make them an ideal solution for an accurate and affordable signal source for industrial, scientific research and educational applications.
DFG-2060
DFG-2040
• Max. output frequency of 40MHz & 60MHz• 2 output channels• Direct Digital Synthesis technology (DDS)• Min. output amplitude 1mV (50Ω) with good stability• Sampling rate 180MSa/s, vertical resolution 10 bits, waveform length 16000 points• 32 built-in waveforms• 40 sets save & recall for panel settings• Modulations: FM, AM, FSK, ASK, PSK• Frequency sweep, amplitude sweep, burst, CHA & CHB ADD and TTL output functions• Over voltage, over current, short circuit and reverse voltage protections• High speed rotary dial and keypad input• 200MHz external frequency counter • USB & RS-232 interface for PC remote control• USB cable & RS232 cable provided
DFG‐2040 & DFG‐2060
45
Technical Specification DFG‐2040 & DFG‐2060
DFG-2040 DFG-2060
40μHz~40MHz 40μHz~60MHz
Harmonic distortion
Total distortion
Rise/fall time
Overshoot
Duty cycle
Rise/fall time
Overshoot
Duty cycle
Sine 40μHz~40MHz 40μHz~60MHz
Square
Other
Resolution
Accuracy
Stability
Flatness
Output impedance
Range
Resolution
Accuracy
Waveform length 4~16000 points
Vertical resolution 10 bits
Sampling rate 180MSa/s
Model
Output frequencyWaveformOutput waveform Sine, Square, Pulse, DC
Pulse
≤20ns
≤5%
0.1%~99.9%
Frequency
Sine≥50dBc (<1MHz);≥40dBc (1~20MHz); ≥30dBc (>20MHz)
≤0.5% (20Hz~200kHz)
Square
≤20ns
≤5%
50.00%
Accuracy ±(5x10-5+40mHz)Stability ±5x10-6 /3hoursOutput characteristics
Range 40μHz~20MHz
40μHz~10MHz
Resolution 40μHz (40μHz~2kHz); 40mHz (>2kHz)
Amplitude
Range
1mVpp~10Vpp (into 50Ω, ≤10MHz)
1mVpp~5Vpp (into 50Ω, 10MHz~40MHz)
1mVpp~2Vpp (into 50Ω, ≥40MHz)
2mVpp~20Vpp (open circuit, ≤10MHz)
2mVpp~10Vpp (open circuit, 10MHz~40MHz)
2mVpp~4Vpp (open circuit, ≥40MHz)
20mVpp (amplitude>2V); 2mVpp (amplitude<2V)
±(1%+2mVrms) (open circuit, 1kHz, sine)
±0.5% /3hours
±5% (<1MHz); ±10% (1~10MHz); ±20% (>10MHz)
50Ω
Parameter Frequency, Amplitude
Range Free to set start and stop point
Time 100ms~600s
Offset
±10V (open circuit, attenuation 0 dB)
20mVdc
±(1%+20mVdc)
Sweep
Frequency Modulation (FM)Modulating signal Internal or external signal
Deviation 0%~20%
Direction Up, Down, Up-Down
Mode Linearity, Logarithmic
Control Auto sweep or manual sweep
DFG‐2040 & DFG‐2060
DFG-2040 DFG-2060
Amplitude Modulation (AM)
Modulating signal Internal or external signal
Depth 0%~120%
Waveform length 1024 points
Vertical resolution
Frequency resolution
FSK Free to set the hop frequency and the carrier frequency
Free to set the hop amplitude and the carrier amplitude
Hop phase: 0~360°, resolution: 11.25°
10ms~60s
ASK
PSK
Alternative rate
Output waveform 32 built-in w aveforms, including Sine, Square, Triangle, Saw tooth, Ladder, etc.
CHB output characteristics
10mHz
±(1x10-5+10mHz)50mVpp~20Vpp (open circuit)
2mVpp
Frequency accuracy
Amplitude range
Amplitude resolution
50Ω
8 bits
Sampling rate 12.5MSa/s
Frequency range Sine: 10mHz~1MHz; Other: 10mHz~100kHz
Burst frequency 10mHz~50kHz
Burst count 1~65000 cycles
Harmonic times 0.1~250.0 times
Harmonic frequency <1MHz
Output impedance
CHB signal is used as the harmonic signal of CHA
Coarse: 11.5°/step; Fine: 2°/step
Frequency of CHB 40mHz~1MHz
Amplitude TTL, CMOS compatible, low<0.3V, high>4V
Frequency counter
Frequency range 1Hz~200MHz
TTL output
Waveform Square, rise/fall time ≤20ns
Frequency Same as CHA signal
Model
Weight 3.5kg
Shift Keying
CHB signal is used as burst signal
Standard accessoriesPower cord x1, Operation manual x1, BNC-BNC cable x1, Test lead x1,Software CD x1, USB cable x1, RS-232 cable x1
Dimension (WxHxD) 260x110x385mm
Interface USB and RS-232 interface
Operating environment 0~40, <80%RH
Power source AC110V/220V±10% selectable, 50/60Hz, Max. 45VA
Operation characteristics Key operation for all functions, Menu display, Rotary dial adjustment
General
Trigger source Continuous, Single
Phase adjustment
100mVpp~20VppInput amplitude
46
10KHz ~ 200KHz LCR METER
Features
47
The LCR‐1000 series are high precision LCR meter with basic accuracy 0.1% and maximum measurement frequency 10kHz, 30kHz and 200kHz. The 5‐digit 4.3‐inch TFT LCD display gives easy reading.
The RS‐232 interface facilitates in remote control and analysis of measurement results. With its fast measurement speed, wide frequency range and low cost, the LCR‐1000 series are widely used in R&D, IQC, online quality control and automatic test system.
• 32-bit core processor• 5-digit 4.3-inch TFT LCD display• 2 signal source output impedance: 30Ω, 100Ω• 100 sets memories for internal storage/save• 500 memories for U disk storage/save• Support FAT16 and FAT32 files• Save the last parameter settings before power off• Standard interface : RS-232, HANDLER,
USB HOST• Optional interface : USB DEVICE, GPIB,
headset, FOOT.C foot switch
LCR‐1010/1030/1200
LCR-1010
LCR-1030
LCR-1200
48
Technical Specification LCR‐1010/1030/1200
Model LCR-1010 LCR-1030 LCR-1200
Test parameter
Basic accuracy 0.15% 0.10% 0.10%Equivalent circuitMathematical functionRange modeTrigger modeMeasurement speedAverage timesDelay timeCalibration functionMeasurement terminalDisplay modeDisplay
Output impedanceTest level 0.1V, 0.3V, 1V 0.1V, 0.3V, 1V 0.1V, 0.3V, 0.5V, 1VTest level accuracy
|Z|, R, X|Y|, G, BCLDQθ (DEG)θ (RAD)∆%
Comparator N/A 4-bin sorting 5-bin sorting
Standard interface Standard: RS232, USB HOSTOptional interface
Operating environmentPower sourcePower consumption
Accessories
DimensionsWeight
≤30VA4-terminal Kelvin test clip leads, 4 terminal test fixture, short circuit plate, RS232 cable, software CD, power cord, operation manual
265W*100H*340D mmApprox.3.5kg
| Z|, |Y|, C, L, X, B, R, G, D, Q, θLCR-7010: 100Hz,120Hz,1kHz,10kHzLCR-7030: 100Hz,120Hz,1kHz,10kHz,20kHz,30kHz
LCR-7200: 40Hz, 50Hz, 60Hz, 75Hz, 100Hz, 120Hz, 150Hz, 200Hz, 250Hz, 300Hz, 400Hz, 500Hz, 600Hz, 750Hz, 800Hz, 1kHz, 1.5kHz, 2kHz, 2.5kHz, 3kHz, 4kHz, 5kHz, 6kHz, 7.5kHz, 10kHz, 12kHz, 15kHz, 15.7kHz, 16.2kHz, 20kHz, 25kHz, 30kHz, 40kHz, 50kHz, 60kHz, 66.6kHz, 75kHz, 100kHz, 120kHz, 150kHz, 200kHz (38 points)
Fast: max.30, Medium: 10, Slow: 3 (times/second) ((≥1kHz))
Direct, ∆, ∆%, V/I (monitoring tested voltage and current)
5%
0.01m Ω - 99.999 MΩ0.0001µS - 99.999 S0.0001 pF - 9.9999 F0.0001 µH - 999.99 H0.0001 - 9.99990.0001 - 99999-179.99º -179.99 º
USB device, GPIBGeneral
Standard: RS232, USB HOST, HANDLER
-6.28318
0°C - 40°C, ≤80%RH110/220V±10%, 47~63Hz
Comparator and interface
Memory
-19.9998
100 sets memories for internal parameter settings storage/save500 sets for U disk parameter settings storage/save
Measurement display range
5 digit 4.3-in LCD displayMeasurement signal
30Ω, 100Ω
1-2550-60s, step 1msOpen circuit, Short circuit, Load5-terminal
Measurement function
Deviation and Percent DeviationAuto, Hold, Manual SelectionInternal, Manual, External, BUS
Test signal frequency
Series, Parallel
STANDBY POWER METERwith DATA LOGGER
HPM‐100A
A surprisingly large number of electrical products such as PC’s, TVs, Microwave ovens, Washers & Driers, Air conditioners, etc. cannot be switched off completely without being unplugged. These products draw power for 24 hours a day which power consumption we call “standby power.“
There are some meters in the market to measure this standby power. Unfortunately, cost for some meters is too high or their accuracy is poor for low‐cost ones. Wattman HPM‐100A is the best Standby Power Meter satisfying both price and accuracy featuring wide measurement input range, Data Logger, GUI Program, etc.
Features
• Data Logger function• GUI Program Gratuitous Supports• Measurement of standby and consumption power (0.009W~3,600W)• Simultaneous display of 4 values for Voltage, Current, Watt & Frequency• Wide measurement range : AC, V, A, W, PF, Hz, Wh, VA, Var, CO₂ , Ocosθ,
Electric charge, expelled volume• Easy to use with multi-consent (Plug & Play)• Electric charge calculation and expelled volume of CO₂ computation available• Battery or Adaptor no needed for measurement• Timely Set (1 hour ~ 24 hours)• Complied with IEC 62301 Safety Standard• Complied with EN 61010-1 Safety Standard• RS232 to USB cable provided
Wattman
49
HPM‐100AWattmanTechnical Specification
Applications
• Public institution & consumption union• Energy saving educational program• Home appliance stores• Electronic product line & service centers
Voltage AC 90V ~ 240V ±(0.3% reading+3 digits)
AC 100uA ~ 5mA ±(0.5% reading+3 digits)
AC 5mA ~ 10A ±(0.3% reading+3 digits)
AC 10A ~ 15A ±(0.4% reading+3 digits)
0.009W ~ 0.45W ±(0.5% reading+3 digits)
0.45W ~ 2,600W ±(0.4% reading+3 digits)
2,600W ~ 3,600W ±(0.5% reading+3 digits)
Reactive Power 0.009Var ~ 3,600Var ±(0.5% reading+3 digits)
Apparent Power 0.009VA ~ 3,600VA ±(0.5% reading+3 digits)
Power Factor ± 0.001 ~ 1.000 ± (0.5% reading+3 digits)
Wattage 0.000mWh ~ 9,990kWh ± (1.0% reading+3 digits)
Frequency 50Hz ~ 1000Hz ± (0.3% reading+3 digits)
Dimension
Weight
Current Measure Range
Current
Wattage Measure Range
Active Power (PF 1.0)
Voltage Measure Range
115 (W) x 200 (H) x 45 (D) mm
260 g
Power Factor
Frequency
Dimension & Weight
Wattage Measure Range
50
HPM‐100AWattman
GUI Program gratuitous supports
51
HPM‐100AWattman
① Data Logging display
② AC Input power
③ Data HOLD
④ PC Communication display
⑤ Wattage display
⑥ Frequency display
⑦ Power factor, CO₂ output & electric charge display unit
⑧ Currency display ($₩¥€ )
⑨ Measured Active Power & Watt-hour display unit
⑩ Current : current usage display for the other measuring device
⑪ Voltage : voltage usage display for the other measuring device
⑫ Autoranging indication
52
ALL‐IN‐ONE UNIVERSAL SYSTEM US‐9170A
Features
• 10MHz DDS Function Generator• 2.7GHz Frequency Counter• Triple Output DC Power Supply• 4 ¾-dight Digital Multimeter
Technical Specification Digital Multimeter
Range Resolution Accuracy Remarks80mV 1µV800mV 10µV Input impedance:
8V 0.1mV 80mV~800mV>1000MΩ80V 1mV 8V~000V:10MΩ
800V 10mV1000V 0.1V
<80% Range:50Hz~20kHz >80% Range:50Hz~20kHz80mV 1μV ±(1.0% +50d) ±(5.0% +50d)800mV 10μV ±(1.0% +50d) ±(5.0% +50d)
8V 0.1mV ±(1.0% +50d) ±(5.0% +50d)80V 1m ±(1.0% +50d) ±(5.0% +50d)
750V 10mV Remark: Input impedance: 80mV~800mV>1000MΩ;8V~1000V: 10MΩ, Parallel capacitance: <100pF
50Hz~1kHz: <90% Range:±(1.0% +50d) & >90% Range:±(3.0% +50)
±(0.3% +10d)
±(0.05% +10d)
±(0.8% +10d)
Range Resolution Accuracy
DC Voltage Measurement
True RMS of AC voltage
53
US‐9170A
Range Resolution Accuracy Remarks80mA 1µA Fuse: F 250V 1A(800mA range) , 800mA 10µA Voltage drop: ≤800mV
8A 0.1mA ±(0.8% +10d) Max. input current: 20A(less than 15s)20A 1mA ±(1.5% +10d)
Range Resolution Accuracy Remarks80mA 1µA Fuses : F 250V 1A S 250V 15A800mA 10µA Voltage drop: ≤800mV
8A 0.1mA ±(1.5% +20d)Sensitivity : mA range is 50Hz~5kHz,
A range is 50Hz~400Hz20A 1mA ±(2.0% +20) Max. Input Current: 20A(up to 15 seconds)
- Resistor
Range Resolution Accuracy Remarks800Ω 0.01Ω ±(0.2% +10d) Overload protection8kΩ 0.1Ω 250Vrms80kΩ 1Ω
800kΩ 10Ω8MΩ 100Ω ±(0.3% rdg+10d)
80MΩ 1kΩ≤40MΩ:±(1.5 % +10)
>40MΩ: ±(3.0% +10)- Frequency
Range Resolution Accuracy Remarks
999.99Hz 0.01Hz Overload protection: 250Vrms
9.9999kHz 0.1Hz Sensitivity: ≥200mVpp
99.99kHz 1Hz
999.99kHz 10Hz
6.0000MHz 100Hz
- Capacitor
Range Resolution Accuracy Remark
1nF 1pF
10nF 10pF
100
F
1µF 1n
10µF 10nF
100µF 100nF
- Temperature
Temperature Resolution Accuracy Remark
<0 or 32 : ±(10% +5°), ≥0 or 32 & ≤1000 or 1832 :
-58 ~ 2502 0.1 >1000 or 1832: ±(3.0% +20°)
- Diode
Functio Range Accuracy / Resolution Remarks
Diode 3.0000V ±(3.0% +5d) / 0.0001VDiode positive voltage drop; overload
protection: 250Vrms- dBm
Function Range Accuracy Resolution
dBm-80.00dBm~ +80.00dBm
±1.0% 0.01dBm
±(0.5%+10d)
±(1.0% +20d
±(0.2% +5d)
100nF
-50 ~ 1372 0.1K Thermocouple Type
±(0.1% +5d)
±(5.0% +50d) Overload protection: 250Vrms
DC Current
True RMS of AC Current
54
DDS Function Generator
US‐9170A
Sine wave 0.1~10
0.1~2 (100mVpp~10Vpp,50Ω)
2~5 (100mVpp~2Vpp,50Ω)
Other waveform 0.1Hz~1 (TTL : 100KHz)
Overshot Characteristic
DC offset range(Vpp AC+DC) ±10V(High Impedance) / ±5V(50Ω)
Type
Sweep frequency
Sweep range
Linearity or Log
Negative or positive
1~10
Sweep Frequency Characteristics
Attenuation
Amplitude flatness ±10%
50Ω±10%/600Ω±10%Output impedance
Frequency accuracy
Frequency stability
Max. resolution
±(5×10-5+80m)
±50ppm(Long Term)
0.01
Amplitude Characteristics
Square waveFrequency range
≤5%
Square duty variable range 15%~85%(≤10)
Waveform asymmetry <1.5%+20ns of period(≤100)
Output amplitude range 100mVpp~20Vpp(High Impedance)
Frequency characteristics
Sine, Triangle, Square
<20: -50dBc / 20~1: -40dBc / 1~10: -35dBc
Triangle linearity <1% (≤100)
Waveform type
Waveform characteristics
Attenuation
Sine harmonious wave distortion(1Vpp, 50Ω)
Sine wave distortion ≤1%(0.1Hz~100)
Square wave Rise/Fall time ≤50n (1, 50Ω, output voltage 5Vpp)
Square overshot:
Sweep frequency velocity 0.01~100
20dB / - Error: ±5%(±0.5dB)(open)
1% ~99%
Square wave output
RS232 Communication for DMM
It has function of RS232 communication which can make user record and save measured data conveniently.
Duty cycle
0.5Hz/1.0Hz/2.0Hz/10Hz/50Hz/60.24Hz/74.63Hz100Hz/151.5Hz/200Hz/303Hz/606.6Hz/
1250H/1666Hz/2500Hz/5000Hz
Description
3V approx.Voltage Amplitude
Frequency
The user should setup RS232 software disc to PC and connect to PC with RS232 cables.
55
Frequency Counter
DC Power Supply
US‐9170A
Input impedance
Resolution
±1×10-7/s ± time base error ± trigger error
10MHz, <±5×10-6(5ppm)
CHA: 35Vpp, CHB: 3Vpp
CHA: 1MΩ, CHB: 50Ω
[(±1×10-7/s) measured signal frequency]/ Strobe time
Input sensitivity
Freq measurement range
Measurement accuracy
Time base
Max. Input voltage
CHA: 1Hz~110 / CHB: 110~2.7
CHA: 40mVrms or 100mVpp(1~80), 70mVrms or 200mVpp (80~110)
CHB: 40mVrms(110~2.0), 70mVrms(2.0~2.7)
Output current
Load effect
Source effect
Max. output current
2A
≤ 3mVrms
0.1%+70mV
0.1%+60mV
21.1A
0~3A
0~30VOutput voltage
Output current
Ripple and noise
Voltage: ±1%+2digit, Current: ±2%+2digit
3.1A
0.1%+15mV
0.1%+30mV
≤3mVrms
Load effect
Source effect
Max. output current
Display accuracy
CH2 output (output port)
CH3 output (output port)
1A
≤3mVrms
0.1%+50mV
0.1%+30mV
1.1A
Output current
Ripple and noise
Load effect
Source effect
Max. output current
+5V fix ±3%Output voltage
±15VfixedOutput voltage
Ripple and noise
CH1 output (output port)
Output amplitude
Output impedance
Low level ≤0.3V/high level ≥3.3V
50Ω ±10%
External amplitude
TTL Output:
Input impedance
Amplitude sensitivity
Amplitude depth
1kΩ
0~5Vpp±5%
0~100%
Ext amplitude freq range (Inner impedance 50Ω of modulation source) : 0.1~20
56
2MHz~10MHz SWEEP FUNCTION GENERATOR
Features
• 4-in-1 Sweep, Function & Pulse Generator and Frequency Counter
• Versatile waveforms for Sine, Square, Triangle, Ramp, Pulse, Sawtooth and DC outputs
• CMOS (FG-8102 only) • Built in 6 digits External Counter Display
measuring up to 100MHz• Internal and External linear Sweep control
from 1:1 to 100:1• Variable Symmetry for generating Sawtooth
and Pulse waveforms • TTL leveled Square waveform output • Variable DC Offset control• Variable Output level control with 20 dB
Attenuator and Amplitude control
FG-8105
FG‐8102/8105/8110
FG-8110
FG-8102
MODEL BANDWIDTH FREQUENCY COUNTERFG-8102 0.02Hz ~ 3MHz 50MHzFG-8105 0.05Hz ~ 5MHz 100MHzFG-8110 0.1Hz ~ 10MHz 100MHz
57
Technical Specification
58
FG‐8102/8105/8110
FG-8102 FG-8105 FG-8110
0.02Hz to 2MHz in 7 Range 0.05Hz to 5MHz in 7 Range 0.1Hz to 10MHz in 7 Range
Flatness ±0.3dB to 3MHz ±0.3dB to 5MHz ±0.3dB to 10MHz
Distortion
Square wave Rise and Fall time Less than 120nSec Less than 25nSec Less than 25nSec
Triangle wave Linearity
Rise and Fall time
Output Level
5 to 15V ±2V N/A N/A
Input Voltage
Input Impedance
200mHz to 50MHz 200mHz to 100MHz 200mHz to 110MHz
Attenuator
Model
Sine, Square, Triangle, Ramp, Pulse, Sawtooth, TTL Leveled Square, DCCMOS (FG-8102 only)
Output Characteristics
Waveforms
± 2% of full scale
20Vp-p in open circuit, 10Vp-p into 50Ω Load
More than +/-5V (into 50ohm)
50Ω±5%
-20dB fixed and continuously variable
Frequency Range
Frequency Accuracy
Output Level
DC Offset Control
Output Impedance
Low pass Filter
Input Sensitivity
Time base
Max. Input Voltage
Approx. 10 Kohm
6digit Green LED, Overflow, Gate time, MHz, kHz, Hz, mHz (FG-8102)7digit Green LED, Overflow, Gate time, MHz, kHz, Hz, mHz (FG-8105 & FG-8110)
Display
External VCF Input
Waveform Characteristics
Less than 1% at 0.1Hz to 100KHz
Linear
Variable from 1 :1 to 100 : 1
Frequency Range
Rate
Symmetry Variation
Mode
Width
TTL Output
Sine wave
General
More than 99% at 0.1Hz to 100 kHz
Less than 25nSec
TTL Level ( H ; Higher than 2.4V, L ; Lower than 0.4V)
1 :1 to 10 : 1
CMOS Output Level (FG-8102 only)
0.5Hz to 50Hz(20mSec to 2Sec)
0 to 10V
+/- Timebase Error+/- 1Count
-3dB, 100kHz
100mVrms
10MHz Crystal, 20ppm
250Vpp
Frequency Counter Characteristics
Sweep Function Characteristics
Accuracy
115/230 VAC ±10%, 48 to 66Hz
0 to 50 (Accuracy specified at 25 ±- 5 )
240(W) X 270(D) X 90(H)mm / 2Kg (FG-8102), 3Kg (FG-8105 & FG-8110)
Power Cord, BNC Cable, Fuse, Instruction Manual
Operating Temperature
Dimension & Weight
Power Requirement
Standard Accessories
1.5GHz~3.0GHz UNIVERSAL COUNTER
Features
• Frequency measuring range
• 10MHz TCXO Internal Time Base• Time interval and Ratio measurement for input A & B• Period and Total measurement for input A• Trigger level adjustment for input A• Separate and Common mode selectable for input A & B• Slope mode selectable for input A & B• 9 Digit display with 0.01 mHz resolution in 1 Sec. (By Ext. Reference Signal)• RS-232C serial interface function for communicating with computer• High sensitivity External reference input function( Higher than 1.5 Vrms)• Reciprocal technique for high resolution at low counting frequencies• Self check function executed to perform a automatic self diagnosis of various counter
function• Push-scanning for selecting Function and Gate time• Low-pass filter(100 kHz, -3 dB) installed for removing noise signal in low frequency
measuring• AC/DC coupling function ( Selectable AC/DC Coupling )• 10:1 Input Attenuation ( Selectable x1/x10 Attenuator ) • Data hold function
59
FC‐8150U & FC‐8030U
FC-8030U
MODELFREQUENCY
INPUT AFREQUENCY
INPUT BFREQUENCY
INPUT C
FC-8150U 0.1Hz - 100MHz 0.1Hz - 100MHz 80MHz~1.5GHz
FC-8030U 0.1Hz - 100MHz 0.1Hz - 100MHz 80MHz~3.0GHz
FC-8150U
Technical Specification
60
FC‐8150U & FC‐8030U
FC-8150U FC-8030U
Input A & B 0.1Hz - 100MHz 0.1Hz - 100MHzinput C 80MHz~1.5GHz 80MHz~3.0GHz
Input A & B 30mVrms 30mVrms
Input C 30mVrms
25mVrms(80MHz-150MHz)20mVrms(150MHz-2.0GHz)60mVrms(2.0GHz-3.0GHz)
Range
Resolution
Accuracy
Range 5Hz to 10MHz DC to 30MHz
Count Capa.
Range
L.S.D Display
Resolution
Accuracy
Range
L.S.D. Display
Accuracy
Frequency
Aging Rate
Temp.Stability
Line Voltage
Frequency
Amplitude
Impedance
Frequency
Input Level
Impedance
General
Power 115 or 230VAC +/- 10% ,48 to 66Hz
Operation Temperature 0 to 50 (Accuracy specified at 25 ±5 )
Dimension 240(W) x 270(D) x 90(H)mm
Weight Approx. 2.5Kg
Standard Accessories Power cord,BNC cable, Fuse, Instruction manual
1.5Vp-p
600 Ω
External Standard
Input
10MHz
1.5Vrms to 5Vrms
600 Ω
Multi Function for input A
Period
10mSec to 10Sec
1pSec to 1nSec depending on Gate time and input Signal
±Resolution±Trigger Error±1count
Totalize0 to 999999999(Max)
Comparison Function for Input A & B
Time Interval (A to B)
Ratio (A / B)
Time Base Characteristics
Internal Timebase
10MHz TCXO
Less than 5x10-6/month
Less than 5 x10-6 (0 to +50 )
Less than 1x10-6 for 10% variation
Frequency Standard
Output
10MHz
Input Characteristics
Terminal A, B, C
Sensitivity
Impedance A & B Input : 1 , 40pF, C input : 50Ω
Max. Input Voltage A & B Input : 250mVrms, C input : 3Vrms
Attenuator A & B Input : x1, x10
Low Pass Filter A & B Input : 100kHz, -3dB
Slope A, B
Trigger A Preset or Variable
+, - Selectable
Model
Display9 digit large green LED display, Overflow, Gate time,
mHz, Hz, kHz, MHz, nS, uS, mS, S, HOLD
Frequency Measurement
Range
Gate Time 0.01Sec, 0.1Sec, 1Sec, 10SecResolution 1mHz to 10Hz Accuracy ±Resolution±Timebase Error±1count
10mSec to 10Sec
100mSec
+/- L.S.D. +/- Trigger Error
+/- Resolution +/- 1count
A x N/B,N = 1 to 1000
+/- 1 Count of A +/- B Trigger Error +/- A
0.1Hz to 100MHz
1.5GHz~3.7GHz FREQUENCY COUNTER
Features
• Frequency measuring range
• 10MHz TCXO Internal Time Base• Period and Total measurement for input A• RPM measurement for input A• 9 Digit display with 0.01 mHz resolution in 1 Sec. (By Ext. Reference Signal)• RS-232C serial interface function for communicating with computer• High sensitivity External reference input function( Higher than 1.5 Vrms)• Reciprocal technique for high resolution at low counting frequencies• Self check function executed to perform a automatic self diagnosis of various counter
function• Push-scanning for selecting Function and Gate time• Low-pass filter(100 kHz, -3 dB) installed for removing noise signal in low frequency
measuring• AC/DC coupling function ( Selectable AC/DC Coupling )• 10:1 Input Attenuation ( Selectable x1/x10 Attenuator ) • Data hold function
61
FC‐8150 & FC‐8300
MODELFREQUENCY
INPUT AFREQUENCY
INPUT CFC-8150 0.1Hz - 100MHz 80MHz~1.5GHz
FC-8300 0.1Hz - 100MHz 80MHz~3.7GHz
FC-8150FC-8300
Technical Specification
62
FC‐8150 & FC‐8300
FC-8150 FC-8300
Input A 0.1Hz - 100MHz 0.1Hz - 100MHz
input C 80MHz~1.5GHz 80MHz~3.7GHz
Input A 30mVrms 30mVrms
Input C 30mVrms
10mVrms(80MHz-2.0GHz)20mVrms(2.0GHz-3.0GHz)30mVrms(3.0GHz-3.2GHz)40mVrms(3.2GHz-3.5GHz)70mVrms(3.5GHz-3.7GHz)
Range
Resolution
Accuracy
Range
Count Capa.
Frequency
Aging Rate
Temp.Stability
Line Voltage
Frequency
Amplitude
Impedance
Frequency
Input Level
Impedance
Model
10mSec to 10Sec
1pSec to 1nSec depending on Gate time and input Signal
±Resolution±Trigger Error±1count
0 to 999999999(Max)
5Hz to 10MHz
General
Power cord,BNC cable, Fuse, Instruction manualStandard Accessories
Approx. 2.5KgWeight
Multi Function for input A
Time Base Characteristics
9 digit large green LED display, Overflow, Gate time, mHz, Hz, kHz, MHz, nS, uS, mS, S, HOLD
0.01Sec, 0.1Sec, 1Sec, 10Sec
±Resolution±Timebase Error±1count
1mHz to 10Hz
Display
Gate Time
Accuracy
Resolution
Sensitivity
Input Characteristics
Terminal A, C
Range
A Input : 1 , 40pF, C input : 50Ω
A Input : 250mVrms, C input : 3Vrms
Impedance
Max. Input Voltage
Frequency Measurement
Internal Timebase
RPM
Period
A Input : x1, x10
A Input : 100kHz, -3dB
115 or 230VAC +/- 10% ,48 to 66Hz
240(W) x 270(D) x 90(H)mm
Power
Dimension
600 Ω
Operation Temperature 0 to 50 (Accuracy specified at 25 ±5 )
Low Pass Filter
Attenuator
Totalize
Frequency Standard
Output
External Standard
Input 1.5Vrms to 5Vrms
10MHz
6 RPM to 900 x 106 RPM
10MHz TCXO
Less than 5x10-6/month
Less than 5 x10-6 (0 to +50 )
Less than 1x10-6 for 10% variation
600 Ω
10MHz
1.5Vp-p
4 ⅞‐DIGIT BENCH TRUE RMSDIGITAL MULTIMETER
DM-1170A
Features
• Large LCD, 80000 count Dual-display, Analog bar 21 sets• 50 measuring functions, with basic DCV, ACV, DCA, ACA, Ω, CAP, Hz, TEMP,
diode and Continuity measuring function, etc.• 18 types of frequency, frequency up to 80MHz, 1800 waveform outputs,
0.1%~99% duty cycle.• Simultaneous measure (AC+DC), (AC+Hz), (DC+dBm), (dBm+Hz), (Hz+Duty), ( + )• Auto data update and refresh, auto data hold, auto peak hold• 36-hour dynamic record: MAG, MIN, AVG, MAX-MIN (REL ), (REL%), setting upper & lower
limit, timing measurement• AC measuring adopts highly accurate true RMS measurement, with testing frequency
bandwidth and AC+DC measuring, capable of accurate true RMS measuring of any waveforms in AC range
• RS-232 interface• RS-232 to USB cable provided
DM‐1170A
63
Technical Specification
DC 80.000mV, 800.00mV, 8.0000V, 80.000V, 800.00V, 1000.0V
AC 80.000mV, 800.00mV, 8.0000V, 80.000V, 750.0V
True RMS
DC ±(0.05% reading+5 digits)
AC ±(0.8% reading+50 digits)
DC 80.000mA, 800.00mA, 8.0000A, 20.000A
AC 80.000mA, 800.00mA, 8.0000A, 20.000A
True RMS
DC ±(0.2% reading+10 digits)
AC ±(0.8% reading+20 digits)
800.00Ω, 8.0000kΩ, 80.000kΩ, 800.00kΩ, 8.0000MΩ, 80.000MΩ
±(0.3% reading+5 digits)
0.50Hz~8.0000MHz
±(0.03% reading+2 digits)
1.000nF, 10.00nF, 100.0nF, 1.000uF, 10.00uF, 100.0uF
±(2.5% reading+50 digits)
-50.0~1372.0 / -58.0~2502.0±(2.0% reading+2 digits)
3V / 0.5Hz~5kHz / 1%~99%
±0.02%
Diode test, AC+DC, Continuity
250V RMS
Large backlit LCD, 2 parameters
80000.00
10MΩ
40Hz-50kHz
4 times/s; Analog bar 40 times/s
Manual range or Auto range
RS-232 interface
AC115V/230V±10% selectable, 50/60Hz
Power cord x1, Operation manual x1, RS-232 cable x1, Software CD x1, Test lead x1, Temperature probex1
260x110x385mm
Approx. 3kg
General
Measurement type
Accuracy
Resistance
Frequency
Capacitance
Temperature
Square wave output
Special functions
Voltage
Current
Overload protection
Range
Measurement type
Accuracy
Range
Accessories
Dimension (WxHxD)
Weight
Display
Counts
Input Impedance
AC frequency response
Sampling rate
Range selection
Interface
Power source
DM‐1170A
64
BENCH DIGITAL MULTIMETER
DM‐1140B & DM‐1150B
• 4 ½-digit (19999count), bench type, large LCD of white backlight, easy to read
• Manual Range operation• Sample Rate : 3 times per sec• Overload protection• With basic DCV, ACV, DCA, ACA, Ω, CAP,
Hz, hFE, Diode and Continuity measuring functions.
• Voltage test range up to 1000V DC or peak-peak value AC, resolution up to 10uV.
• Current test range up to 20A, auto polarity shift, data hold
• AC measuring adopts high accuracy true RMS, measuring broadband and AC+DC function, enabling accurate measuring of virtual value of AC by any waveform
• 4 ⅞‐DIGIT Large LCD, 80000 count Dual-display AND Analog bar 21 sets
• 50 measuring functions, with basic DCV, ACV, DCA, ACA, Ω, CAP, Hz, TEMP, diode and Continuity measuring function, etc.
• 18 types of frequency, frequency up to 80MHz, 1800 waveform outputs, 0.1%~99% duty cycle.
• Simultaneous measure (AC+DC), (AC+Hz), (DC+dBm), (dBm+Hz), (Hz+Duty), ( + )
• Auto data update and refresh, auto data hold, auto peak hold
• 36-hour dynamic record: MAG, MIN, AVG, MAX-MIN (REL ), (REL%), setting upper & lower limit, timing measurement
• AC measuring adopts highly accurate true RMS measurement, with testing frequency bandwidth and AC+DC measuring, capable of accurate true RMS measuring of any waveforms in AC range
• RS-232 interface
65
4 ½‐DIGIT & 4 ⅞‐DIGIT TRUE RMSBENCH DIGITAL MULTIMETER
Features Features
DM-1140BDM-1150B
Technical Specification
66
DM‐1140B
Technical Specification DM‐1150B
67
Spec. Range Resolution Remarks
80mV 1μV800mV 10μV8V 0.1mV80V 1mV800V 10mV1000V 0.1V
80mV 1μV<75% Range:
50Hz~20kHz
<75% Range:
20kHz~50kHz
>75% Range:
50Hz~20kHz800mV 10μV8V 0.1mV80V 1mV
80mA 1μA800mA 10μA8A 0.1mA20A 1mA80mA 1μA800mA 10μA8A 0.1mA20A 1mA800Ω 0.01Ω8kΩ 0.1Ω80kΩ 1Ω800kΩ 10Ω8MΩ 100Ω
999.99Hz 0.01Hz9.9999kHz 0.1Hz99.999kHz 1Hz999.99kHz 10Hz8.0000MHz 100Hz10.0MHz 1kHz100.0MHz 10kHz1000.0MHz 100kHz1nF 1pF10nF 10pF100nF 100pF1μF 1nF10μF 10nF100μF 100nF
50 ~1300 0.0 58 ~2372 0.1 -80.00dBm~+80.00dBm
Temp. ±(1.5% rdg+10)
±1.0% rdg
±(0.2% rdg+10)
±(0.5% rdg+10)
±(0.2% rdg+10) / 50Hz~5kHz
DCA
Diode 3.0000V 0.0001V ±(3.0% rdg+5)
Frequency
±(0.5% rdg+5)
±(0.1% rdg+5)
Accuracy
DCV
±(3% rdg+10)
±(0.05% rdg+5)
±(0.08% rdg+10)
ACV(T-RMS) ±(0.8% rdg+50) ±(6.0% rdg+50) ±(8.0% rdg+50)
750V 10mV ± (0.8% rdg+50) (at <90% Range), 50Hz~1kHz ± (5.0% rdg+50) (at >90% Range), 50Hz~1kHz
Voltage amplitude : Approx.3V / Frequency : 0.5Hz~5000Hz / Duty cycle : 1%~99%Square Wave Output
Max.input current: 20A
(up to15 seconds)
ACA(T-RMS)±(0.5% rdg+10) / 50Hz~500Hz
Max.input current: 20A
(up to15 seconds)
Resistance
±(0.3% rdg+10)
Overload protection: 250V RMS
Sensitiv ity : 0.7V RMS±(0.3% rdg+5)
Plus adapter(Optional)
Capacitance
±(5.0% rdg+50)
Overload protection: 250V RMS±(2.5% rdg+50)
dBm
80MΩ 1kΩ0Ω~40MΩ: ±(2.5% rdg+10)
40MΩ~80MΩ: ±(3.5% rdg+10)
0.01dBm
Input impedance :
80mV~800mV: >1000MΩ;
8V~1000V: 10MΩ.
Input impedance :
80mV~800mV: >1000MΩ;
8V~1000V: 10MΩ.
Parallel capacitance: <100pF
Overload protection: 250V RMS
Diode positive voltage drop
Overload protection: 250V RMSK type thermocouple
Overload protection: 250V RMS
Fuse: F750Ma/250v F13A/250V
Voltage drop: ≤800mV
Fuse: F750Ma/250v F13A/250V
Voltage drop: ≤800mV
HANDHELD DIGITAL MULTIMETERDMM 188
Technical Specification
• 3 ½-digit Manual Range Digital Multimeter• Large LCD makes reading easy and clear• Strong anti-magnetic and anti-jamming performance• Auto power off within 30 minutes• Full protection function, anti high voltage circuit design
(voltage dependent resistor 1300V) • Unit and function symbols display• Capacitance test range up to 2000Uf• Self-discharge when capacitance measuring • Peak value hold • Frequency auto ranging, up to 10MHz
68
Features
3 ½‐DIGIT HANDHELD DIGITAL MULTIMETER
ModelBasic function Range AccuracyDCV 200mV/2V/20V/200V/1000V ±(0.5%+3)ACV 200mV/2V/20V/200V/750V ±(0.8%+5)DCA 2mA/20mA/200mA/20A ±(0.8%+3)ACA 2mA/20mA/200mA/20A ±(1.0%+5)Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ/2000MΩ ±(0.8%+3)Inductance 2mH/20mH/200mH/2H/20H ±(3.0%+10)Capacitance 20nF/200nF/2uF/20uF/2000uF ±(3.0%+10)Frequency 2kHz/20kHz/200kHz/2000kHz/10MHz ±(0.5%+4)Temperature -40~1000 ±(0.8%+4)
Diode test √hFE test √Continuity alarm <30Ω±10ΩLow battery indication Approx. <7.5VData hold Peak value holdAuto power off Approx. 30 minutesFunction protection √Anti-shock protection √Input impedance 10MΩSampling rate 3 times/sAC frequency response 40-400HzRange selection Manual range (Frequency: Auto range)Max. display 1999LCD size 65×41mmBattery 9V 6F22Power dissipation Quiescent current approx. 6mAMeter size 185×93×35mmNet weight 290g(including battery)
DMM 188
Special function
BENCH DIGITAL MULTIMETER
DMM 197 & 199
Technical Specification
• 4000/6000 Auto Range Digital Multimeter
• Large LCD makes, Unit and function symbols display, easy and clear reading
• Strong anti-magnetic and anti-jamming performance
• Auto power off within 15 minutes• Full protection function• Capacitance test range up to 2000uF (Model 199)• Relative value, frequency/duty cycle measuring,
data hold
69
Features
3 ¾‐DIGIT & 3 ⅚‐DIGIT HANDHELD DIGITAL MULTIMETER
DMM 197 3 3/4-digit 4000 counts
DMM 199 3 5/6-digit 6000 counts
DMM 197 DMM 199Basic function Range
400mV/4V/40V/400V/1000V ±(0.5%+4)600mV/6V/60V/600V/1000V ±(0.5%+3)400mV/4V/40V/400V/750V ±(0.8%+6)6V/60V/600V/750V ±(0.8%+5)400uA/4000uA/40mA/400mA/4A/20A ±(1.0%+5)600uA/6000uA/60mA/600mA/6A/20A ±(1.0%+3)400uA/4000uA/40mA/400mA/4A/20A ±(1.5%+5)600uA/6000uA/60mA/600mA/6A/20A ±(1.2%+5)400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(0.8%+1)600Ω/6kΩ/60kΩ/600kΩ/6MΩ/40MΩ ±(0.8%+3)4nF/40nF/400nF/4uF/40uF/400uF/200uF ±(2.5%+6)40nF/400nF/4uF/40uF/400uF/2000uF ±(2.5%+5)
Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/30MHz ±(0.5%+4) ±(0.5%+4)0~1000 ±(0.8%+4) ±(0.8%+4)0~1832 ±(0.8%+5)
Diode testhFE testAnalog barContinuity <50Ω±10Ω <30Ω±10ΩLow battery Data hold √ MAX, MIN, HOLDAuto power offFunction Anti-shock Input Sampling rateAC frequency Range Max. display 4000 6000LCD sizeBatteryPower AccessoriesMeter size &
ModelAccuracy
Special function
ACA
Resistance
Capacitance
Temperature
DCV
ACV
DCA
65×41mm2×1.5V AAA
Quiescent current approx. 2mATest lead, Battery, User manual, Temperature probe
185×93×35mm, 290g (including battery)
10MΩ3 times/s40~400Hz
Manual range or Auto range
Approx. <2.4V
Approx.15 minutes
√√√
√√
60MHz~200MHz DIGITAL STORAGE OSCILLOSCOPE
Features
Technical Specification
DS‐1065/1100/1200
• 60MHz/100MHz/200MHz bandwidth• 500MS/s to 1GS/s real-time sample rate• 50GS/s sample rate for repetitive waveforms• 1M Memory• 2mV/div to 50V/div Vertical Sensitivity• High resolution color LCD display• USB storage, RS232C , optional J45 interface• 4000 point record length for each channel• Multi-waveforms math, FFT Function• Built-in delay sweep function• Automatic Multi-waveform Measurement• Cursor & Track measurement• Waveform Record & Recall• Trigger Mode for Edge, Video, Pulse Width,
Slope & Alternate• Pass & Failure for ordinary setting and
waveform setting• Calibration Signal with optional frequency of
1KHz,10KHz &100KHz• 10 groups of waveform storage, CSV storage,
10 groups of setting and position storage
70
Model DS-1065 DS-1100 DS-1200
Bandwidth 60MHz 100MHz 200MHz
Channel
Vertical Resolution
Vertical Sensitivity
Simulation bandwidth
Rising time ≤5.8ns ≤3.5ns ≤1.8ns
Input impedance
Max safe input voltage
CH1, CH2
Vertical system
8 bit
2mV/div -50V/div, 1-2-5 14 step
-3dB
1MΩ ±2%, 20pF±5
400V(DC+AC peak) / Frequency≤400Hz (when input impedance is 1MΩ)
MODEL BANDWIDTH SAMPLING RATE
DS-1065 60MHz 500MSa/s
DS-1100 100MHz 1GSa/s
DS-1200 200MHz 1GSa/s
71
DS‐1065/1100/1200
Model DS-1065 DS-1100 DS-1200
ModeSampling Rate 500MS/s 1GS/s 1GS/s Equivalent sampling rate 50GS/s 50GS/s 50GS/s Waveform interpolation Record length Horizontal working mode Primary sweep, primary sweep + delay expansion sweep and X-Y / 1-2-5 Timebase range 50s/div~10ns/div 50s/div~5ns/div 50s/div~1ns/divTimebase accuracy
Trigger source
Auto trigger range
Trigger level range
Measurement
Auto measure
Display
Display screen
Display type
Display mode
Output interface
Storage
Power supply
Temperature
Humidity
Size & Weight
Working : 40 / (20~90)%RH / Storage : 50 / 90%RH, 24h
300mm×150mm×130mm, 2.5Kg (net weight)
General
Normal, Flat, Average, Peak value, Afterglow
USB, RS232, J45 Ethernet interface(Optional)
Setting / Waveform storage : 10 groups
AC 100V~240V ±10% / 45Hz~440H / about 25W
Working: 0 ~+40 / Storage : -40 ~+60
positive ratio, negative ratio, delay 1-2
Display 5.7 inch color LCD display
320pixel(horizontal)× 234pixel (vertical)
dot, vector
bottom value, amplitude value,
root-mean-square value, average value, overshot, pre-shot, damp.
Time parameter
: cycle, frequency, rising time, fall time,
positive pulse width, negative pulse width,
Slope trigger :more than, equal to and less than setting time
Cursors
Voltage parameter
: Max, Min, peak-peak value, top value,
V, T, 1/ T
Trigger mode
100Hz~100MHz square signal
Int. trigger:±4div / Ext. trigger:±1.6V
Edge trigger : Rise along, drop along
Impulse trigger : More than, equal to and less than setting pulse width.
Video trigger : TV-V, TV-H
Trigger
X-YPhase potential difference :≤3° when 5MHz
CH1, CH2, EXT, city electricity
inner:≥1div (frequency upper limit is 40MHz)
Trigger sensitivity
≥2div (frequency is more than 40MHz)
≥2div, V, T, 1/ T
out :≥100mVp-p frequency upper limit is 40MHz
≥200mVp-p frequency is more than 40MHz
≥200mVp-p, TV-V, TV-H video trigger
Horizontal system CH1, CH2, CH1±CH2, CH1×CH2, CH1/CH2, FFT
Sin(x)/x ≥4kB/CH, expandable to 256MB or 512MB
±100ppm
X (CH1) frequency bandwidth : DC ~ full bandwidth (-3dB)
30MHz~100MHz REALTIME OSCILLOSCOPE
Features
OS‐9030A/9060A/9100A
• DC to 100MHz bandwidth• A & B dual time base sweep displayed sync. • High sensitivity up to 1mV/div • Magnification setting for ∆T of main sweep
A via delay sweep B • Hold off function • Fine outline & high performance ratio • Sweep rate : 0.1uS/div to 0.2s/div • Max. input : 400V(DC+ACpeak) at
AC freq ≤ 1KHz
• DC to 30MHz bandwidth• 2 Channel, Dual Trace• High sensitivity up to 1mV • Auto triggered sweep in full range • Flexible trigger source select• Alternate trigger function• Trigger signal output• Sweep rate : 0.1uS/div to 0.2s/div• Max. input voltage : 400V(DC+ACp-p)
Features
Features
• DC to 60MHz Bandwidth• 2 Channel, Dual Trace• High sensitivity up to 1mV/div• High light graduation illumination• Displayed x1 and Mag trace after Mag. • Stable TV-H & TV-V signal • Auto focus• Trigger level lock
OS-9030A
OS-9060A
OS-9100A
72
Technical Specification
73
OS‐9030A/9060A/9100A
Model OS-9030A OS-9060A OS-9100A
Bandwidth (-3dB)DC : 0~30MHz
AC : 10Hz~30MHzDC : 0~60MHz
AC : 10Hz~60MHzDC : 0~100MHz
AC : 10Hz~100MHzBandwidth at MAG (-3dB)
DC : 0~5MHzAC : 10Hz~5MHz
DC : 0~7MHzAC : 10Hz~7MHz
DC : 0~15MHzAC : 10Hz~15MHz
Mode CH1,CH2,ALT,CHOP,ADD,X-Y
Deflection Factor5mV/div ~ 10V/div in
1-2-5 step, 11 steps, ±5%Rising Time ≤12ns, ≤70ns by MAG ≤6ns ≤3.5nsOvershoot ≤8%Input Impedance ≤5%Input CouplingMaxium Input Voltage 400V(DC+AC peak) 300V(DC+AC peak) 400V(DC+AC peak)Polarity Inverter
Output voltage Minimum 20mV/div Minimum 20mV/divOutput impedance Approximately 50Ω Approximately 50ΩBand width 50Hz to 5MHz (-3dB) 50Hz to 5MHz (-3dB)
Sweep mode ×1, ×5 ; ×1, ×5ALT ×1, ×5 ; ×1, ×5ALT A, B, B TRIG’D, X-Y, ALT
Sweep time 0.1μs to 0.2s/div±5% 0.1μs to 0.2s/div±5%A: 0.05μs to 0.2s/DIV±5%B: 0.05μs to 10s/DIV±5%
Sweep expansion 10ns/div to 20ms/div 10ns/div to 20ms/div ×10 MAG: 8%
Delay System Continuous or Triggering Delay Time 0.2μs~2sHold-off Continuous change for 2 times
Trigger source CH1,CH2,ALT,LINE,EXTTrigger Mode AC/DC(EXT), NORM/TVPolarity
Trigger Value5Hz ~ 30MHz
INT: 1div / EXT: 0.2Vp-pDC~60MHz
INT : 2div / EXT : 0.5VDC~100MHz
INT : 2div / EXT : 0.5VTV Sync INT: 2div EXT: 0.3Vp-p INT: 2div EXT: 1Vp-p INT: 2div EXT: 1Vp-p Ext. Trig 1±5%MΩ∥≤30pF
Sweep Mode AUTO, TRIG, LOCK, SINGLE
Sweep Time Factor0.1μs/div~0.2s/div in
1-2-5 sequenceSweep Mag ×10 MAG: 5%
Delay Time 0.2μs~2s
Hold-off Continuous or trigged
Signal InputDeflection
Frequency responseAC: 10Hz~1MHz -3dB
DC: 0~1MHz –3dBDC~2MHz DC~2MHz
Input Impedance ≤5% 1MΩ±2% , 25pF±3 pFX-Y phrase error ≤3°(DC~50kHz) ≤3°(DC~50kHz) ≤3°(DC~100kHz)
Maxium Input Voltage 50V(DC+ACp-p) 30V(DC+ACp-p) 30V(DC+ACp-p)Input Impedance 10kΩ 33kΩ 40kΩFrequency DC ~5MHz DC ~ 2MHz DC ~ 2MHz
TypeEffective Screen
Vertical system
5mV/div to 5V/div 1-2-5 step, 10 steps (1mV/div to 1V/div at ×5 MAG) Accuracy
1MΩ ±2%, 25pF±3pFAC-GND-DC
CH1, CH2, ADD, DUAL (CHOP, ALT)
≤5%
6 inch square internal scale8cm×10cm(1cm=1div)
X-Axis: CH1 Y-Axis: CH2Same as Vertical System
Z-Axis System
Horizontal system
A : 0.05uS/div ~ 0.2S/div ±5%, 1-2-5, 21 stepsB : 0.05uS/div ~ 10uS/div ±5%, 1-2-5, 8 steps
CRT
CH1 Input Amplifier
Time Axis
X-Y
A, B, B TRIG’D, X-Y, ALT
CH2 only
+,-AUTO, NORM, TV-V,TV-H
INT, CH2, LINE, EXTTrigger
FM/AM SYNTHESIZED SIGNAL GENERATOR
Features
SG-1501B
SG-1710
The model SG‐1501B is synthesized Signal Generator which has frequency range from 100kHz to 150MHz. It generates CW and FM/AM modulation signals, its output range is from ‐20dBμto126dBμ. This advanced FM/AM signal generator can be controlled by external equipment through GPIB interface.
The model SG‐1710 is a high‐performance general purpose 200kHz to 1000MHz synthesized signal generator with low phase noise and very good FM/AM capability. The product is designed for manual as well as ATE applications and is ideally suited for various test tasks during product development and manufacturing of RF products such as cellular radios or cordless phones.
• High accuracy with 100Hz in full range• Output level can be specified by 0.1dB step
between -20dBμ to 126dBμ.• Presetting function for simple operation.• STEREO Function• Compact size and light weight.• Crystal oscillator stability : 5 × 10-6 (5ppm)• GPIB Interface (Option)
Features
• High performance frequency synthesis using DDS.
• High resolution output frequency, 1Hz• FM deviation up to 100kHz• AM up to 100%• Wide range output for receiver test :
127dBm ~ 13dBm• Reverse Power Protection ( RPP ) 25W max.• Store-recall up to 300 front panel settings.• Standard GPIB & RS-232C Interface
74
SG‐1501B & SG‐1710
Technical Specification
75
SG‐1501B
Range 100kHz~150MHz (76MHz~110MHz, FM Stereo)
Resolution 100Hz
Accuracy 5×10⁻(5ppm)
Range
-20dBμ ~126dBμ at open circuit (-133dBm ~ 13dBm into 50Ω termination)
Resolution 0.1dB
Accuracy ±1dB at 100 dBμ
Attenuator Accuracy ±1.5dB(126~100 dBμ) , ±1dB(20~100 dBμ) ±2dB(-20~20 dBμ)
Output Impedance 50Ω, VAWR less than 1.2
Spurious & Harmonics ≤-30dBc
Residual Modulation(S/N) FM Component : 70dB or more AM Component : 50dB or more
Internal Modulation Frequency : 400Hz, 1kHz
External Modulation Input Impedance: 10kΩ unbalanced±10% Input Voltage : 3Vp-p±2%
FM Range 0~100kHz (at 1MHz~150MHz) Carrier Frequency×10% (at<1MHz) Carrier Frequency×10%
- Accuracy ±10% of maximum frequency deviation
- Pre-Emphasis off, 25usec,50usec,75usec
- Distortion
<0.06% (at 10.7MHz, 76~110MHz)<0.11% (at other range); with Dev=75kHz, AF1kHz,Demod.BW=50Hz~15kHz,DE-emp.=50ec
AM Range 0~60%
- Resolution 0%
- Accuracy ±5% at internal rate(100kHz~110MHz) ±10% at internal rate(110MHz~150MHz)
- Distortion <0.65% (at 400kHz~30MHz) < 1.5% (at other range) with Depth =30% , AF 1kHz,Demod. BW=50Hz~15kHz
Separation ≥50dB(at 400Hz~1kHz)≥35dB(at 100Hz~10kHz)≥30dB(at 50Hz~15kHz)
Pilot 19kHz ±2Hz
Distortion <0.07% (at Main 90%,Pilot off)
Preset Keys FM : 3.5kHz, 22.5kHz, 75kHz AM : 30% Stereo : 30%, 100% Output Level : 4points
Memories 100 points
Power Requirements 115/230VAC, 50/60Hz
Dimensions 115(H) × 430(W) × 310(D) mm
Weight Approx. 7kg
Standard Accessories Power Cable, BNC Cable, Operating Manual, Fuse
Option GPIB
FREQUENCY
OUTPUT LEVEL
MODULATION
STEREO
MEMORY
GENERAL
Technical Specification
76
SG‐1710
200kHz ~ 1000MHz
VFD
1Hz
0.5ppm
-14dBu ~ 126dBu at open circuit (-127dBm ~ 13dBm)
0.1dB
±1.0dB > -37dBm, ±(1.5dB+0.1dB/10dB) ≤ -37dBm
50Ω, VAWR less than 1.5
± 1.2dB at 0dBm
≤ -30dBc
≤ -25dBc above 550MHz
< -50dBc (<-137.5MHz), < -60dBc (137.5 ~ 1000MHz)
FM < 30Hz(CF:<137.5MHz),<5Hz(CF:137.5~275MHz)< 10Hz(CF:275~550MHz),<20Hz(CF:550~1000MHz)
AM <-65dBc
MAX 25W
400Hz or 1kHz
10Hz ~ 20kHz
External ModulationInput Impedance: 600Ω unbalancedInput Voltage : 1Vpeak
Deviation Range 0~100kHz
Resolution 100Hz
Accuracy ±6% of programmed setting
Distortion Less than 2% by 1kHz AF Signal
Range 0 ~ 100% (≤ 7dBm)
Resolution 0.1%
Accuracy±1%+(±5% of programmed setting)
Distortion <5%(70~90% AM)<3%(30~70% AM)<1.5%(0~30% AM)
MEMORY CONTROL 300point
115/230VAC, 50/60Hz
115(H) × 430(W) × 410(D) mm
Approx. 14kg
Power Cord, Output Cable, Operating Manual, Fuse
FREQUENCY
OUTPUT LEVEL
MODULATION
GENERAL
Range
Display
Resolution
Accuracy
Range
Resolution
Accuracy
Output Impedance
Flatness
Frequency
Internal Modulation
FM
Harmonics
Sub-Harmonics
Spurious
Residual Modulation
Reverse Power Protection
Standard Accessories
AM
Memory
Power Requirements
Dimensions
Weight
THANK YOU
327, Gangnamdae-ro, Seoch-guCentury Business Center 201Seoul 137-751, KoreaPhone : (02) 553-4765Fax : (02) 553-4764E-mail : unisource@unisource21.com
10585 Bloomfield StreetLos Alamitos Business CeterLos Alamitos, CA 90720, U.S.A.Phone : (562) 493-7959Fax : (562) 493-7984E-mail : unisourceusa@unisource21.com
top related