test & measuring instrument catalogg_center/assets/… · 2018 new products volume 09. jan,...

TEST & MEASURING

INSTRUMENT CATALOG

www.uniteqcorp.com

INDEX

High Voltage Programmable Switching DC Power Supply ------------- 1

300W~900W Programmable Switching DC Power Supply ------------- 10

Multiple Output Dual Range Switching DC Power Supply ------------- 13

360W Single Output Switching DC Power Supply ------------------------ 15

150W~600W Programmable DC Electronic Load -------------------------- 16

180W~375W Single Output Programmable DC Power Supply -------- 20

195W~315W Multi-Channel Programmable DC Power Supply -------- 23

115W~315W Triple Output Linear DC Power Supply --------------------- 25

180W~300W Dual Output Linear DC Power Supply ----------------------- 29

90W~300W Single Output Linear DC Power Supply ---------------------- 31

200W~100KW AC Power Source ------------------------------------------------ 34

25MHz~60MHz Arbitrary Waveform Function Generator --------------- 36

10MHz~20MHz Arbitrary Waveform DDS Function Generator -------- 38

5MHz~60MHz Low-Cost DDS Function Generator ------------------------ 41

10KHz~200KHz LCR Meter -------------------------------------------------------- 47

Standby Power Meter with Data Logger -------------------------------------- 49

All-in-One Universal System ----------------------------------------------------- 53

2MHz~10MHz Sweep Function Generator ------------------------------------ 57

1.5GHz~3.7GHz Universal/Frequency Counter ----------------------------- 59

True RMS Bench Digital Multimeter -------------------------------------------- 63

Handheld Digital Multimeter ------------------------------------------------------ 68

Digital Storage Oscilloscope ----------------------------------------------------- 70

Analog Oscilloscope ---------------------------------------------------------------- 72

FM/AM Signal Generator ----------------------------------------------------------- 74

2018 NEW PRODUCTS

Volume 09. Jan, 2018

5MHz~60MHz LOW‐COST DDS FUNCTION GENERATOR

• 2 output channels• 32 built-in waveforms• 40 sets save & recall for panel settings• Modulations: FM, AM, FSK, ASK, PSK• Frequency sweep, amplitude sweep,

burst, and TTL output functions• CHA & CHB ADD output (DFG-2040 &2060)

25MHz~60MHz ARBITRARY WAVEFORM FUNCTION GENERATOR

• 1μHz~25MHz/40MHz/60MHz frequency• 2 independent output channels • 4.5-inch TFT LCD display• Sampling rate 150MSa/s, vertical resolution

14 bits and waveform length of 16k points• 6 standard waveforms, 50 built-in waveforms

and 12 user-defined arbitrary waveforms• AM, DSSC AM, FM, PM, ASK, FSK & BPSK• RS232, USB device and USB Host

10KHz ~ 200KHz LCR METER

MODELOUTPUT

FREQUENCY

SAMPLING

RATE

WAVEFORM

LENGTH

Frequency

CounterRS232C & USB

DFG‐2005 1μHz~5MHz optionDFG‐2010 1μHz~10MHz optionDFG‐2020 1μHz~20MHz optionDFG‐2040 40μHz~40MHz StandardDFG‐2060 40μHz~60MHz Standard

100MSa/s

180MSa/s 16000 points

1024 points200MHz

PROGRAMMABLE SWITCHINGDC POWER SUPPLY

• 32-bit core processor• 5-digit 4.3-inch TFT LCD display• 100 sets memories for internal &

500 memories for U disk storage/save• Support FAT16 and FAT32 files

• Max. rated output 600W and 2400W• Constant voltage and constant current

operations and auto CV/CC switch • OVP, OCP, OTP, OLP and UVP• RS232, RS485 and RS422

600W & 1200W PROGRAMMABLE SWITCHING DC POWER SUPPLY

Features

PCH Series

• Program debugging function by PC • Max. rated output 600W and 1200W• Max. rated voltage from +1000V to +12KV• Option for negative output from -1000V to -12KV• Constant voltage and constant current operations, auto CV/CC switch • Built into 2U 19-inch standard chassis• 4 1/2 digits LED display for voltage and current• Thermostatic control fan, low noise• Adopting ZVZCS PWM technology, high efficiency and high stability• Low ripple, high stability• Front panel operation: preset voltage and current, output ON/OFF• Multiple protections: OVP, OCP, OTP, OLP and UVP• Multiple programming interfaces: RS232, RS485 and RS422• Support ModBus-RTU commands

The PCH series are high power output Switching DC power supply with rated power of 600W and 1200W. The PCH series adopts ZVZCS PWM technology, which greatly reduces switching consumption and therefore facilitates switching function with high efficiency and high stability.

The PCH series are built into a 2U 19‐inch standard chassis. The maximum rated voltage is from +1000V to +12KV. There is option for negative output from ‐1000V to ‐12KV. RS232, RS485 and RS422 communication interfaces are made as standard part for PCH series, providing multiple communication choices for digital control.

1

Technical Specification PCH Series

PCH600-10H PCH600-12H PCH600-15H PCH600-20H PCH600-30H PCH600-40H PCH600-50H

PCH600-10HN PCH600-12HN PCH600-15HN PCH600-20HN PCH600-30HN PCH600-40HN PCH600-50HN

0~1000V 0~1200V 0~1500V 0~2000V 200~3000V 200~4000V 300~5000V

-100~-1000V -120~-1200V -150~-1500V -200~-2000V -300~-3000V -400~-4000V -500~-5000V

Current 0~600mA 0~500mA 0~400mA 0~300mA 0~200mA 0~150mA 0~120mA

0~1050V 100~1260V 100~1575V 200~2100V 200~3150V 200~4200V 300~5250V

0~-1050V -100~-1260V -100~-1575V -200~-2100V -300~-3150V -400~-4200V -500~-5250V

≤0.05% FS ≤0.05% FS ≤0.05% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS

Voltage 1V 1V 1V 1V 1V 1V 1V

Current 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA

OVP 1V 1V 1V 1V 1V 1V 1V

Voltage 1V 1V 1V 1V 1V 1V 1V

Current 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA

Built-in UVP protection w ith limit of 165Vac.

The output w ill be shut dow n the UVP is activated.

Dimensions 482Wx88Hx460D mm

Under Voltage Protection (U.V.P.)

Storage environment -20 ~70 , 10%~90%RH

Pow er source AC220V±10%, 47~63Hz

Weight 11~14kg

General

Cooling method Cooling fan

Operating environment 0 ~40 , 10%~80%RH

Over Current Protection (O.C.P.) Over load, short circuit and output current limit

Over Temperature Protection (O.T.P.)

Built-in OTP protection w ith heat sink temperature limit of 50 ±5%.

The output w ill be shut dow n w hen OTP is activated.

Commands ModBus-RTU

Protection

Over Voltage Protection (O.V.P.)Built-in OVP protection w ith limit of 105% rated output voltage.

The output w ill be shut dow n w hen OVP is activated.

Display accuracy Voltage≤0.2%+2LSB, Current ≤0.5%+2LSB

Programming

Interface RS232, RS485 and RS422

Line regulation CV≤0.1%+2LSB, CC≤0.1%+2LSB

Ripple & Noise

Programming resolution

Display resolution

Output

Load regulation CV≤0.5%+2LSB, CC≤0.5%+2LSB

Model

Voltage

Rated output

OVP

2

PCH Series

PCH600-60H PCH600-80H PCH600-100H PCH600-120H PCH1200-10H PCH1200-12H

PCH600-60HN PCH600-80HN PCH600-100HN PCH600-120HN PCH1200-10HN PCH1200-12HN

600~6000V 800~8000V 1000~10000V 1200~12000V 0~1000V 0~1200V

-600~-6000V -800~-8000V -800~-10000V -1200~-12000V -100~-1000V -120~-1200V

Current 0~100mA 0~75mA 0~60mA 0~50mA 0~1.2A 0~1A

600~6120V 800~8400V 1000~10500V 1200~12600V 0~1050V 0~1260V

-500~-6120V -800~-8400V -1000~-10500V -1200~-12600V -100~-1050V -120~-1260V

≤0.1% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS

Voltage 1V 1V 1V 1V 1V 1V

Current 0.1mA 0. 01mA 0. 01mA 0. 01mA 1mA 1mA

OVP 1V 1V 1V 1V 1V 1V


Current 0.1mA 0.01mA 0.01mA 0.01mA 1mA 1mA

Weight 11~14kg


Under Voltage Protection(U.V.P.)



Pow er source AC220V±10%, 47~63Hz

Built-in UVP protection w ith limit of 165Vac.

The output w ill be shut dow n the UVP is activated.

General




Built-in OTP protection w ith heat sink temperature limit of 50 ±5%.

The output w ill be shut dow n w hen OTP is activated.

Over Voltage Protection (O.V.P.)Built-in OVP protection w ith limit of 105% rated output voltage.

The output w ill be shut dow n w hen OVP is activated.

Ripple & Noise


Display resolution


Programming


Commands ModBus-RTU

Protection


Output


Model

Voltage

Rated output

OVP

3

PCH Series

PCH1200-15H PCH1200-20H PCH1200-30H PCH1200-40H PCH1200-50H PCH1200-60H

PCH1200-15HN PCH1200-20HN PCH1200-30HN PCH1200-40HN PCH1200-50HN PCH1200-60HN

0~1500V 0~2000V 300~3000V 400~4000V 500~5000V 600~6000V

-150~-1500V -200~-2000V -300~-3000V -400~-4000V -500~-5000V -600~-6000V

Current 0~800mA 0~600mA 0~400mA 0~300mA 0~240mA 0~200mA

100~1575V 200~2100V 300~3150V 400~4200V 500~5250V 600~6120V

-100~-1575V -200~-2100V -300~-3150V -400~-4200V -500~-5250V -600~-6120V

≤0.1% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS ≤0.1% FS


Current 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA

OVP 1V 1V 1V 1V 1V 1V


Current 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA

Specifications are subject to change without prior notice.

Weight 11~14kg


Under Voltage Protection

(U.V.P.)


Storage environment ‐20 ~70 , 10%~90%RH

Power source AC220V±10%, 47~63Hz

Built‐in UVP protection with limit of 165Vac.

The output will be shut down the UVP is activated.

General



Over Temperature Protection

(O.T.P.)

Built‐in OTP protection with heat sink temperature limit of 50 ±5%.

The output will be shut down when OTP is activated.

Over Voltage Protection (O.V.P.)Built‐in OVP protection with limit of 105% rated output voltage.

The output will be shut down when OVP is activated.

Ripple & Noise

Programming

resolution

Display

resolution


Programming


Commands ModBus‐RTU

Protection


Output


Model

Voltage

Rated output

OVP

4

1200W & 2400W PROGRAMMABLE SWITCHING DC POWER SUPPLY

Features

PCL Series

• Max. rated output 1200W and 2400W• Max. rated voltage from 6V to 600V, max. rated current from 2A to 200A• Constant voltage and constant current operations, auto CV/CC switch • Built into 2U 19-inch standard chassis• 4 1/2 digits LED display for voltage and current• Thermostatic control fan, low noise• Adopting ZVZCS PWM technology, high efficiency and high stability• Low ripple and high stability• Front panel operation: preset voltage and current, output ON/OFF• Multiple protections: OVP, OCP, OTP, OLP and UVP• Multiple programming interfaces: RS232, RS485 and RS422• Support ModBus-RTU commands

For max. current <100A For max. current ≥100A

The PCL series are high power output Switching DC power supply with rated power of 1200W and 2400W. The PCL series adopts ZVZCS PWM technology, which greatly reduces switching consumption and therefore facilitates switching function with high efficiency and high stability.

The PCL series are built into a 2U 19‐inch standard chassis. The maximum rated voltage is from 6V to 600V and the maximum rated current is from 2A to 200A. RS232, RS485 and RS422 communication interfaces are made as standard part for PCL series, providing multiple communication choices for digital control.

5

Technical Specification PCL Series

PCL1200-6 PCL1200-12 PCL1200-15 PCL1200-30 PCL1200-60 PCL1200-1H

Voltage 0~6V 0~12V 0~15V 0~30V 0~60V 0~100V

Current 0~200A 0~100A 0~80A 0~40A 0~20A 0~12A

OVP 0~6.3V 0~12.6V 0~15.75V 0~31.5V 0~63V 0~105V

≤50mV ≤50mV ≤50mV ≤50mV ≤50mV ≤100mV

OVP 0.001V 0.01V 0.01V 0.01V 0.01V 0.1V

Voltage 0.001V 0.01V 0.01V 0.01V 0.01V 0.1V

Current 0.1A 0.1A 0.01A 0.01A 0.01A 0.01A

Voltage 0.001V 0.01V 0.01V 0.01V 0.01V 0.1V

Current 0.1A 0.1A 0.01A 0.01A 0.01A 0.01A

Rated output

Load regulation


Model

Output

Ripple & Noise


Display resolution


Programming


Commands ModBus-RTU

Protection

Over Voltage Protection (O.V.P.)Built-in OVP protection with limit of 105% rated output voltage.



Built-in OTP protection with heat sink temperature limit of 50 ±5%.



(U.V.P.)

Built-in UVP protection with limit of 165Vac.



CV≤0.2%+2LSB, CC≤0.2%+2LSB

CV≤0.1%+2LSB, CC≤0.1%+2LSB



Weight 11~14kg

General




6

PCL Series

PCL1200-150 PCL1200-2H PCL1200-3H PCL1200-400 PCL1200-5H PCL1200-6H

Voltage 0~150V 0~200V 0~300V 0~400V 0~500V 0~600V

Current 0~8A 0~6A 0~4A 0~3A 0~2.4A 0~2A

OVP 0~157.5V 0~210V 0~315V 0~420V 0~525V 0~630V

≤100mV ≤100mV ≤100mV ≤100mV ≤200mV ≤200mV

OVP 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V

Voltage 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V

Current 0.001A 0.001A 0.001A 0.001A 0.001A 0.001A

Voltage 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V

Current 0.001A 0.001A 0.001A 0.001A 0.001A 0.001A

Model

Output

Rated output





Ripple & Noise


Display resolution


Programming


Commands ModBus-RTU

Protection





(U.V.P.)



General



Weight 11~14kg





7

PCL Series

PCL2400-12 PCL2400-20 PCL2400-30 PCL2400-40 PCL2400-60 PCL2400-1H

Voltage 0~12V 0~20V 0~30V 0~40V 0~60V 0~100V

Current 0~200A 0~120A 0~80A 0~60A 0~40A 0~24A

OVP 0~12.6V 0~21V 0~31.5V 0~42V 0~63V 0~105V

≤100mV ≤100mV ≤100mV ≤100mV ≤100mV ≤100mV

OVP 0.01V 0.01V 0.01V 0.01V 0.01V 0.1V

Voltage 0.01V 0.01V 0.01V 0.01V 0.01V 0.1V

Current 0.1A 0.1A 0.01A 0.01A 0.01A 0.01A

Voltage 0.01V 0.01V 0.01V 0.01V 0.01V 0.1V

Current 0.1A 0.1A 0.01A 0.01A 0.01A 0.01A

Model

Output

Rated output





Ripple & Noise


Display resolution


Programming


Commands ModBus-RTU

Protection





(U.V.P.)



General



Weight 11~14kg





8

PCL Series

PCL2400-150 PCL2400-2H PCL2400-3H PCL2400-400 PCL2400-50H PCL2400-6H

Voltage 0~150V 0~200V 0~300V 0~400V 0~500V 0~600V

Current 0~16A 0~12A 0~8A 0~6A 0~4.8A 0~4A

OVP 0~157.5V 0~210V 0~315V 0~420V 0~525V 0~630V

≤100mV ≤100mV ≤200mV ≤200mV ≤200mV ≤200mV

OVP 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V

Voltage 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V

Current 0.01A 0.01A 0.001A 0.001A 0.001A 0.001A

Voltage 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V

Current 0.01A 0.01A 0.001A 0.001A 0.001A 0.001A


Model

Output

Rated output


Protection


Ripple & Noise


Display resolution


Programming


Commands ModBus-RTU









(U.V.P.)



General

Weight 11~14kg





9

300W~900W PROGRAMMABLE SWITCHING DC POWER SUPPLY

Features

• High accuracy, high resolution• Over load, over voltage, over current, over temperature and reverse polarity protections• Constant voltage and constant current operations, auto CV and CC switch• 4.3-inch TFT LCD display• High speed rotary dial and keypad input• Built-in beeper alarm• Panel lock and output ON/OFF function• List mode function and 100 sets save & recall for voltage• Current and time setups, and easy use in auto test• Remote sense function• Low resistance measurement function, display load resistance value• Battery charge mode• Standard USB host interface for data storage and recall from external USB flash driver• Standard RS-232 interface, support SCPI commands, support Labview• Standard 0-5V analog control• RS-232 to USB cable provided• Optional RS-485 interface, support Modbus

300W to 900W SPC series are high accuracy programmable DC power supplies with single output. MPU control & RS‐232/RS‐485/USB interface make SPC series facilitate auto test and auto control. The commands of the SPC series are compliant with SCPI commands. Users can easily develop programs to facilitate different applications in auto test and auto control. Users can also store or recall data via the USB host on front panel.

The 4.3‐inch TFT LCD display gives full display for parameters and output waveforms. Digital input fulfilled by rotary dial and keypad input makes input to be fast and accurate. Voltage and current regulations by software avoids human error and makes the SPC series to be more accurate.

SPC Series

MODEL VOLTAGE CURRENT

SPC-3010 30V 10A

SPC-1560 15V 60A

SPC-3030 30V 30A

SPC-6015 60V 15A

10

SPC Series

11

Technical Specification SPC Series

SPC-3010 SPC-1560 SPC-3030 SPC-6015

0~30V 0~15V 0~30V 0~60V

0~10A 0~60A 0~30A 0~15A

0.1~34V 0.1~18V 0.1~34V 0.1~64V

0.1~12A 0.1~62 A 0.1~34A 0.1~17A

Voltage

Current

Voltage

Current

4.5kg 5.5kg 5.5kg 5.5kg


Model

Rated output (0 ~40 )

Voltage

Current

Constant Current Operation

Line regulation ≤0.2%+3mA

O.V.P

O.C.P

Constant Voltage Operation

Line regulation ≤0.01%+4mV

Load regulation ≤0.1%+5mV

Ripple & Noise (20Hz~20MHz) 2mVrms, 30mVpp

Recovery time ≤1.5ms (50% load change)

Reading accuracy (25±5 )

±(0.02% of reading +5mV)

±(0.3% of reading +10mA)

Load regulation ≤0.2%+5mA

Ripple & Noise ≤10mArms

Display

Voltmeter 5 digits LCD display

Ammeter 5 digits LCD display

Setting resolution 1mV/1mA

Reading resolution 1mV/1mA

Setting accuracy (25±5 )

±(0.03% of reading + 10mV)

±(0.3% of reading + 10mA)

Memory 100 sets internal save, support save to USB flash driver

Insulation Between base and terminals: ≤60VDC

General

Protection Over load, over voltage, over current, over temperature and reverse polarity protections

Panel lock Provided

Remote sense function Maximum compensation voltage 0.1V@ Maximum output

Battery charge Lithium battery curve charge

Interface

RS232 interface, Support SCPI commands

0-5V analog control

RS232 to USB cable provided

Optional RS485 interface, support ModBus

Weight

Indoor use Altitude: ≤2000m Ambient temperature: 0~40

Relative humidity: ≤80% Installation category: II Pollution degree: 2Operating environment

Storage environment -10 ~70 , ≤70%RH

Power source AC220V±10%, 50/60Hz

Accessories Power cord x1, Operation manual x1, RS232 cable x1, Software CD x1

Dimension (WxHxD) 215x89x412mm

12

MULTIPLE OUTPUT DUAL RANGESWITCHING DC POWER SUPPLY

SPS‐3606

Features

• Three independent & isolated output : CH1/ CH2 dual range output of 30V/6A or 60V/3ACH3 0.1~5V/3A, adjustable output

• Constant voltage and constant current operations• Auto Series and Parallel tracking operations providing flexible output of 30V/12A,

60V/6A or 120V/3A• High power conversion efficiency by improving the power efficiency by 25%• Manual and remote ON/OFF control• Manual over voltage protection• Over voltage, over load, over temperature and reverse polarity protections• Power source AC115V/230V auto switch• Fan speed control circuit to minimize acoustic noise• Compact design and light weight

SPS‐3606 Switching mode DC power supply provides 375W output capacity with three independent outputs and CH1/CH2 dual‐range output (30V/ 6A or 60V/3A), which accommodates a wide range of applications.

On the basis of fixed output capacity, it enables output voltage or current to the maximum. With high power density and high conversion efficiency, multiple protections, high reliability, low noise and compact design, SPS‐3606 is completely adequate for satisfying mainstream power supply demands.

13

Technical Specification SPS‐3606

Independent mode 0~30V/0~6A; 0~60V/0~3A

Series mode 0~60V/0~6A; 0~120V/0~3A

Parallel mode 0~30V/0~12A; 0~60V/0~6A

0.1~5V/3A

Line regulation

Load regulation

Riple & Noise

Recovery time

Line regulation

Load regulation

Riple & Noise

Tracking error

Series regulation

Riple & Noise

Voltage up(10%~90%)

Voltage down(90%~10%)

Output voltage

Output current

Protection

Accuracy

Meter

Resolution

Accuracy

Protection

Remote control

Fan noise

Power source

Accessories

Dimension & Weight

Constant current operation

Tracking Operation

Output On/Off Response Time

Output

CH3

Over voltage protection

Display

Insulation

3A

Over voltage, over load, over temperature and reverse polarity protections

±(0.5% reading+0.5V)

31/2 digits0.39" LED display100mV/10mA

±(0.5% reading +2 digits)

≤50dB

Current: ≤150ppm/ +3mA

Between chassis & terminal: ≥100MΩ/1000VDC

Between chassis and AC code:≥100MΩ/1000VDC

Over voltage and reverse polarity protections

Voltage: ≤100ppm/ +3mV

≤10mVrms (5Hz~1MHz); ≤100mVpp (20Hz~20MHz)

≤100ms (≤95% rated load)

≤100ms (≥10% rated load)

0.1~5V, adjustable

CH3 output

≤0.2%+3mA

≤0.2%+3mA

≤3mA rms

≤(0.5%+10mV) of the master

≤300mV

CH1 & CH2

≤0.01%+3mV

≤0.01%+5mV (rating current≤6A); ≤0.01%+8mV (rating current≤12A)

≤5mV rms (5Hz~1MHz); ≤50mVpp (20Hz~20MHz)

≤100us (50% load change, minimum load 0.5A)

Constant voltage operation

Temperature co-efficient

Ambient temperature: 0~40

Relative humidity: ≤80%

Ambient temperature: 0 ~70

Operating environment

Storage environmentRelative humidity:≤70%

AC 115V/230V±15%, 50/60Hz

Operation manual ×1, Power cord ×1, Test lead ×1

310×250×150mm, 5.5Kg

Output On/Off

14

360W SINGLE OUTPUT SWITCHING DC POWER SUPPLY

Features

Technical Specification

• 3 digit red LED display of voltage and current

• Constant voltage and current operation

• Coarse and fine voltage control• Short Circuit and Overload

Protection• Cooling Fan automatically operated

by temperature • High efficient Power

Our Switching DC Power Supplies are the ideal DC sources for Lab, Service, Industrial or Educational applications. They are designed with an energy saving circuit for cooler, more reliable and efficient operation at all output levels. All our supplies have 'short circuit' and 'overload' protection providing "fool proof" operation for any applications.

PS‐1000 Series

PS-1230 PS-1820 PS-3610 PS-6006 PS-2415

Voltage 0~12V 0~18V 0~36V 0~60V 0~24V

Current 0~30A 0~20A 0~10A 0~6A 0~15A

Voltage 5mV 5mV 5mV 5mV 5mV

Current 3mA 3mA 3mA 3mA 3mA


Current 3mA 3mA 3mA 3mA 3mA

Voltage

Current

Voltage (p-p) 100mV 100mV 100mV 100mV 100mV

Voltage (rms) 5mV 5mV 5mV 5mV 5mV

Current (rms) 5mA 5mA 5mA 5mA 5mA

Chassis to Terminal

Chassis to AC input

20 or above (DC 500V)

30 or above (DC 500V)

Dimension

±(0.5%rdg + 2 digits)

±(0.5%rdg + 2 digits)

Instruction Manual, Power Cord, Test Lead, Spare Fuse

115V/230V ±10%, 50/60Hz

Approx. 3.5Kg

138 × 162 × 290 mm

Accessories

MODEL

Line Regulation

Load Regulation

Meter Accuracy

Power Source

Insulation

Weight

Output

Noise & Ripple (Load Max.)

15

150W~600W PROGRAMMABLE DC ELECTRONIC LOAD

Features

DCL‐1000 Series

• 4 basic functions: CC, CV, CR, CP• 9 basic operation modes: CCL, CCH, CVL, CVH, CRL, CRM, CRH, CPV, CPC• 24-bit A/D converter, 16-bit D/A converter, 40kHz D/A conversion speed & high resolution• Hardware circuit for CR function, faster transient response and higher CR accuracy• High speed transient test function, max. test frequency 2kHz• Over current, over voltage, over power, over temperature and reverse voltage protections• 4.3-inch backlit Segment LCD display & Auto ON/OFF function• High speed rotary dial and keypad input• List Mode function, step 10ms-99999s, free to set numbers of cycles and to be linked • Auxiliary functions: short circuit test, battery discharge capacity test• Save & recall function for frequently used setups• Intelligent cooling system, ensure high stability during long-time operation under full load• Standard RS-232 interface, support SCPI commands, support Labview, RS232 to USB cable

The DCL‐1000 series are high performance programmable DC electronic load. Four basic functions and nine basic operation modes provides sufficient solutions wherever power sources need to be tested. Especially unique CPV and CPC modes greatly improved the functionality of constant power operation.

The strong List Mode function, with Min. step 10ms and Max. step 99999s, allows users to set numbers of cycles at free and to link to other lists, facilitating complicated tests. Equipped with RS‐232 interface for PC control, SCPI commands and Labview development platform, the DCL‐1000 series are designed to provide high reliability, great performance and easy operation in research and production of aerospace, ship building, auto electronics, solar battery, fuel cell, etc.

150W DCL-1011

300W DCL-1032600W DCL-1062

Model Power Voltage Current MOV@FS current Model Power Voltage Current MOV@FS current

DCL‐1011 150W 0~150V 1mA~30A 1.5V DCL‐1033 300W 0~500V 1mA~15A 3.8V



16

Technical Specification DCL‐1000 Series

DCL-1011 DCL-1031 DCL-1032 DCL-1033 DCL-1061 DCL-1062

0~150V 0~150V 0~150V 0~500V 0~150V 0~500V

1mA~30A 1mA~30A 1mA~60A 1mA~15A 1mA~60A 1mA~30A

150W 300W 300W 300W 600W 600W

1.5V 0.82V 1.2V 3.8V 0.9V 4.2V

0.1~30V 0.1~30V 0.1~30V 0.1~30V 0.1~30V 0.1~30V

1mV 1mV 1mV 1mV 1mV 1mV

0.10~150V 0.10~150V 0.10~150V 0.10~500V 0.10~150V 0.10~500V


0~3A 0~3A 0~6A 0~1.5A 0~6A 0~3A

1mA 1mA 1mA 1mA 1mA 1mA

0~30A 0~30A 0~60A 0~15A 0~60A 0~30A


≈0.06～6Ω ≈0.04～6Ω ≈0.025～3Ω ≈0.3～36Ω ≈0.02~3Ω ≈0.15~18Ω

100uΩ 100uΩ 50uΩ 600uΩ 50uΩ 300uΩ

≈6～600Ω ≈6～600Ω ≈3～300Ω ≈36～3600Ω ≈3~300Ω ≈18~1800Ω

2.7us 2.7us 5.4us 0.45us 5.4us 0.90us

≈60～4000Ω ≈60～4000Ω ≈30～4000Ω ≈360～4000Ω ≈30~4000Ω ≈180~4000Ω

0.30us 0.30us 0.20us 0.051us 0.20us 0.10us

≈0.06～1.12Ω ≈0.04～1.12Ω ≈0.025～0.6Ω ≈0.3～2.4Ω ≈0.02~0.6Ω ≈0.15~1.2Ω

18uΩ 18uΩ 9.6uΩ 38uΩ 9.6uΩ 19uΩ

≈1.12～112Ω ≈1.12～112Ω ≈0.6～60Ω ≈2.4～240Ω ≈0.6~60Ω ≈1.2~120Ω

15us 15us 27us 6.8us 27us 14us

≈11.2～2000Ω ≈11.2～2000Ω ≈6.0～2000Ω ≈24～2000Ω ≈6.0~2000Ω ≈12~2000Ω

1.6us 1.6us 3.0us 0.78us 3.0us 1.5us

0~150W 0~300W 0~300W 0~300W 0~600W 0~600W

P<100W 1mW 1mW 1mW 1mW 1mW 1mW

P≥100W 10mW 10mW 10mW 10mW 10mW 10mW

±(1%+1%FS)

±(1.5%+1.5%FS)

±(1%+0.1%FS)

Rated input (0~40)

Constant voltage mode (CV)

Constant current mode (CC)

Constant resistance mode (CR) (Input voltage /current≥10%FS)

Constant power mode (CP) (Input voltage /current≥10%FS)

±(0.5%+0.5%FS)

±(1%+1%FS)

±(1.5%+1.5%FS)

±(0.5%+0.5%FS)

Resolution

Accuracy (Impedance)

Medium range (VL CRM)

Resolution

Accuracy (Conductance)


High range (VH CRH)

Resolution *2


Low range (VL CRL)

Low range (VH CRL)

Resolution

Resolution

Accuracy

High range (VL CRH)

Resolution


Range

±(0.05%+0.025%FS)

Low range

Resolution

Accuracy

High range

±(0.05%+0.02%FS)

Accuracy (Impedance)

Middle range (VH CRM)

Resolution

Accuracy

High range

Resolution

Accuracy

±(0.1%+0.1%FS)

±(0.1%+0.15%FS)

Voltage

Current

Power *1

MOV@FS current

Model

Resolution

Accuracy

Low range

Resolution

17

DCL‐1000 Series


0~30V 0~30V 0~30V 0~30V 0~30V 0~30V


0~150V 0~150V 0~150V 0~500V 0~150V 0~500V


0~3A 0~3A 0~6A 0~1.5A 0~6A 0~3A


0~30A 0~30A 0~60A 0~15A 0~60A 0~30A


0~150W 0~300W 0~300W 0~300W 0~600W 0~600W

P<100W 1mW 1mW 1mW 1mW 1mW 1mW

P≥100W 10mW 10mW 10mW 10mW 100mW 100mW

CCH (/us) 0.1mA ~1.5A 0.1mA ~1.5A 0.1mA ~3A 0.1mA ~0.75A 0.1mA ~3A 0.1mA ~1.5A

CCL (/us) *3 0.1mA ~0.15A 0.1mA ~0.15A 0.1mA ~0.33A 0.1mA ~0.075A 0.1mA ~0.33A 0.1mA ~0.15A

0.1mA/us 0.1mA/us 0.1mA/us 0.1mA/us 0.1mA/us 0.1mA/us

1s~100h 1s~100h 1s~100h 1s~100h 1s~100h 1s~100h

1s 1s 1s 1s 1s 1s

3000Ah 3000Ah 6000Ah 1500Ah 6000Ah 3000Ah

1mAh 1mAh 1mAh 1mAh 1mAh 1mAh

0.1V~150V 0.1V~150V 0.1V~150V 0.1V~150V 0.1V~150V 0.1V~150V


3.6A 3.6A 7.2A 1.8A 7.2A 3.6A

33A 33A 66A 16.5A 66A 33A

0V 0V 0V 0V 0V 0V

0.044Ω 0.027Ω 0.022Ω 0.24Ω 0.015Ω 0.13Ω

5.6Ω 5.6Ω 2.8Ω 31Ω 2.8Ω 16Ω

58Ω 58Ω 29Ω 310Ω 29Ω 160Ω

0.044Ω 0.027Ω 0.022Ω 0.24Ω 0.015Ω 0.13Ω

1.1Ω 1.1Ω 0.53Ω 2Ω 0.53Ω 1.0Ω

0.3%+0.01Ah

Short circuit

±(0.1%+0.1%FS)

±(0.1%+0.15%FS)

Power measurement (Input voltage /current≥10%FS)

1%+0.1%FS

Current slew rate

CCH

CV

VH CRL

VH CRM

VH CRH

Accuracy

Discharge voltage range

Discharge current resolution

CCL

Discharge time

Resolution

Accuracy

Battery capacity

VL CRL

VL CRM

Resolution

Range

Resolution

Accuracy *4 3%+10us

Battery discharge

Accuracy

Range

Resolution

Accuracy

0.2%+1s

Low range

Resolution

Accuracy

High range

Resolution

Accuracy

High range

Resolution

Accuracy

±(0.05%+0.02%FS)

±(0.05%+0.025%FS)

Current measurement

Low range

Resolution

Voltage measurement

Model

18

DCL‐1000 Series


10Ω 10Ω 5.3Ω 20Ω 5.3Ω 10Ω

165W 315W 315W 315W 630W 630W

0W 0W 0W 0W 0W 0W

1.5A /us 1.5A /us 3A /us 0.75A /us 3A /us 1.5A /us

0.2V /us 0.2V /us 0.2V /us 0.02V /us 0.2V /us 0.02V /us

Open circuit ≥20kΩ ≥20kΩ ≥20kΩ ≥20kΩ ≥20kΩ ≥20kΩ

33A 33A 66A 16.5A 66A 33A

175V 175V 175V 550V 175V 550V

3mA/30mA 3mA/30mA 6mA/60mA 5mA/50mA 6mA/60mA 5mA/50mA


215x89x412mm

5.2kg


Max. slew rate

Max. input level

Current

Voltage

Accessories

Dimension (WxHxD)

Weight

215x89x412mm

6.7kg

Power cord x1, Operation manual x1, RS-232 cable x1, RS232C to USB cable x1

215x89x507mm

9kg

Transient mode

Frequency range *5

High/Low time

Resolution

Accuracy

Rising/Falling time

Resolution

Accuracy

Step time

Resolution

Accuracy

No. of steps

No. of cycles

Storage

Expanded function

Interface


Storage environment

Power source

RS-232 interface, support SCPI commands, support Labview, RS232 to USB

0~40, ≤85%RH

-10~70, ≤70%RH

AC110V/220V±10% selectable, 50/60Hz

Trigger level

Trigger pulse width

Protection

Trigger input

TTL falling edge

≥20us

General

Over current, over voltage, over power, over temperature and reverse voltage protections

0.2+10us

1~50

0~65535

8 Lists

Chain

250us

0.2%+10us

List Mode

10ms~99999s

10ms

0.01Hz~2kHz

0~99999ms

250us

0.2%+10us

250us~99999ms

Ripple & Noise

Transient operation

Continuous, Pulse, Toggled

Current

Voltage

Current (rms/p-p)

Voltage (rms)

VL CRH

CPV

CPC

Model

19

180W to 375W PSP series are high precision programmable DC power supplies features lowregulation 0.01%, low ripple and noise with 1mVrms, automatic continuous or dynamic loadchange, battery charge function, MPU control, RS‐232/RS‐485/USB interface, etc.

The commands of the PSP series are compliant with SCPI commands. Users can easily developprograms to facilitate different applications in auto test and auto control. Digital input fulfilledby rotary dial and keypad makes input to be fast and accurate. Voltage and current regulationsby software avoids human error and makes the PSP series to be more accurate.

Features

• 0.01% low regulation, high accuracy and high resolution• Over load, over voltage, over current, over temperature and reverse polarity protections• Constant voltage and constant current operations, auto CV and CC switch• Automatic continuous or dynamic load change• 1mVrms low ripple & noise• 4.3-inch backlit Segment LCD display• High speed rotary dial and keypad input• Built-in beeper alarm• Panel lock and output ON/OFF function• List mode function, 100 sets save & recall for voltage and current and time setups• Remote sense function• Low resistance measurement function, display load resistance value• Battery charge mode• Standard RS-232 interface, support SCPI commands, support Labview• RS-232 to USB cable provided• Optional RS-485 interface, support Modbus

180W~375W SINGLE OUTPUT PROGRAMMABLE DC POWER SUPPLY

PSP Series

MODEL VOLTAGE CURRENT

PSP-3605 36V 5A

PSP-6005 60V 5A

PSP-3010 30V 10A

PSP-7505 75V 5A

PSP-1820 18V 20A

PSP-7505

20

Technical SpecificationPSP-3605 PSP-6005 PSP-3010 PSP-7505 PSP-1820

0~36V 0~60V 0~30V 0~75V 0~18V

0~5A 0~5A 0~10A 0~5A 0~20A

0.1~40V 0.1~64V 0.1~34V 0.1~80V 0.1~21V

0.1~5.5A 0.1~5.5A 0.1~11A 0.1~5.5A 0.1~22A

≤1mVrms

≤5mAms

1mV/0.1mA 1mV/0.1mA 1mV/1mA 2mV/0.1mA 1mV/1mA


Current 0.1mA 0.1mA 1mA 0.1mA 1mA

Voltage

Current

Voltage

Current

Setting accuracy (25±5 )

General

Protection Over load, over voltage, over current, over temperature and reverse polarity protections

Panel lock Provided

Remote sense function Maximum compensation voltage 0.1V@ Maximum output

±(0.05% of reading +5mA) ±(0.05% of reading +10mA) : PSP-1820

O.C.P


Line regulation

Load regulation

Load regulation

Ripple & Noise (5Hz~1MHz)

Recovery time ≤100us (50% load change, minimum load 0.5A)

≤1mVrms (I≤3A); ≤2mVrms (I>3A); ≤3mVrms (V≥75V)

Ammeter

Setting resolution

Ripple & Noise

Display

Voltmeter

≤3mArms (I≤3A), ≤6mArms (I>3A)

Reading accuracy (25±5 )

Output

O.V.P

Model

Output

Battery charge Lithium battery curve charge

Rated output (0 ~40 )

Constant Voltage Operation


5 digits LCD display

5 digits LCD display

≤0.2%+3mA (I≤3A); ≤0.2%+5mA (I>3A)

≤0.2%+3mA

≤0.01%+3mV (I≤3A); ≤0.02%+5mV (I>3A)

Reading resolution

±(0.03% of reading + 10mV)

±(0.2% of reading + 10mA) ±(0.2% of reading + 20mA) : PSP-1820

±(0.02% of reading +5mV)

PSP Series

21

PSP-3605 PSP-6005 PSP-3010 PSP-7505 PSP-1820

8kg 8kg 8.5kg 8.5kg 9.8kg

Interface

Panel lock

Remote sense function

Battery charge

Storage environment

Memory

Insulation


-10 ~70 , ≤70%RH

Indoor use Altitude: ≤2000m Ambient temperature: 0~40

Relative humidity: ≤80% Installation category: II Pollution degree: 2

Between base and AC power cord: ≥30MΩ/500VDC

Between base and terminals: ≥20MΩ/500VDC

100 sets

Provided

Protection

Model

Over load, over voltage, over current, over temperature and reverse polarity protections

General

Dimension (WxHxD)

Weight

Power source

Accessories

215x89x352mm

Pow er cord x1, Operation manual x1, RS232 cable x1, Softw are CD x1, Test lead x1


Optional 0-5V analog control

Optional RS485 interface, support ModBus

RS232 to USB cable

RS232 interface, Support SCPI commands

Lithium battery curve charge

Maximum compensation voltage 0.1V@ Maximum output

PSP Series

PSP-3605 PSP-3010

PSP-6005PSP-1820

22

195W~315W MULTI‐CHANNELPROGRAMMABLE DC POWER SUPPLY

Features

• Two independent adjustable outputs : 0~30V/3A x 2, 0~30V/5A x 2• One fixed output : 2.5V/3.3V/5V(Selectable)-3A• Constant voltage and constant current operations• Digital panel control and Coarse/Fine volume control for voltage and current • 4 sets panel settings of save & recall • Panel lock function and output standby function• Preset voltage and current• Auto Series and Parallel tracking operations• Intelligent cooling fan control• USB Interface for PC control (PS-3303U & PS-3305U)• Support Labview

PS-3303U & PS-3305U PS-3303 & PS-3305

The PS‐3300 series programmable DC power supply are light weight, adjustable, multi‐functional work stations. They have three independent outputs: two with adjustable voltage level and one with fixed level selectable from 2.5V, 3.3V and 5V. The power supply can be used for logic circuits where various output voltage or current are needed, and for tracking mode definition systems where positive and negative voltages with good accuracy are required.

PS‐3300 Series

USB

VOLTAGE CURRENT VOLTAGE CURRENT INTERFACE

PS-3303U 0~30V 0~3A 2.5V/3.3V/5V 3A √PS-3305U 0~30V 0~5A 2.5V/3.3V/5V 3A √PS-3303 0~30V 0~3A 2.5V/3.3V/5V 3APS-3305 0~30V 0~5A 2.5V/3.3V/5V 3A

MODELDUAL OUTPUT FIXED OUTPUT

23

Technical Specification PS‐3300 Series

MODEL PS-3303U & PS-3303 PS-3305U & PS-3305

Output 0-30V/3A x 2 0-30V/5A x 2

Line regulation ≤0.01%+3mV ≤0.01%+3mV

Load regulation ≤0.01%+3mV ≤0.02%+5mV

Recovery time

Ripple & Noise ≤1mV rms ≤2mV rms


Line regulation ≤0.2%+3mA ≤0.2%+3mA

Load regulation ≤0.2%+3mA ≤0.2%+5mA

Ripple & Noise ≤3mA rms ≤6mA rms



Line regulation

Load regulation

Regulation

Ripple & Noise

Output voltage

Output current

Ammeter

Voltmeter

Display resolution

V : ±(0.5% of reading + 2digits) V : ±(0.5% of reading + 2digits

A: ±(0.5% of reading + 2digits) A : ±(0.5% of reading + 5digits)

V : ±(0.5% of reading + 2digits) V : ±(0.5% of reading + 2digits

A : ±(0.5% of reading + 2digits) A : ±(0.5% of reading + 5digits)

Dimension

Net Weight Approx. 7.5kg Approx. 10.0kg

32.0V full scale, 3 digits 0.5” LED display

Voltmeter: 100mV Ammeter: 10mA

Saving accuracy

Readback accuracy

300 x 220 x 148mm

InsulationBetween base and output terminal≥20MΩ/500VDC

Between base and power cord≥30MΩ/500VDC

Display

3.20A full scale, 3 digits 0.5” LED display

Line regulation≤25mV, Load regulation≤25mV

≤2mV rms

2.5V, 3.3V, 5V (selectable), ±8%

3A

ProtectionOver voltage, over current, over load, over temperature, current limit,

short circuit and reverser polarity protections.


≤100us

Slave tracking error: ≤0.5%+10mV of the master

(No load. With load, add load regulation≤300mV)

CH3 output

≤300mV

Positive and Negative Supply

≤300PPm/


Tracking parallel

Tracking serial

≤0.01%+5mV

24

115W~205W TRIPLE OUTPUT LINEAR DC POWER SUPPLY

Features • Output Voltage & Current : two variable & one fixed• Constant voltage and current operation• Each output has a readout for voltage and current (3 digit red LED display)• Indicators for constant voltage, constant current and overload operation• Coarse and fine voltage controls for accurate voltage and current settings• Excellent load, line and ripple specifications• Built-in current limiting circuit• Short Circuit and overload protection• Series, Parallel & Tracking Operation• Output polarity : (+), (-), GND, positive or negative

Our DC power supplies are the ideal DC sources for Lab, Service, Industrial or Educational applications. They are designed with an energy saving circuit for cooler. More reliable and efficient operation is performed at all output levels. All our power supplies have short circuit and overload protection providing full proof operation for any applications.

P‐3000 Series

25

P-3035T

P-3625T

PS-3015TRP

VOLTAGE CURRENT VOLTAGE CURRENT

P-3035T 0~30V 0~3A 5V 3A

P-3625T 0~36V 0~2.5A 3.3V/5V 5A

PS-3015TPR 0~30V 0~1.5A 5V 5A


Technical Specification P‐3000 Series

P-3035T P-3625T PS-3015TPR

0~30V Dual5V Fixed

0~36V Dual 3.3V/5V Fixed

0~30V Dual 5V Fixed

0~3A Dual 3A Fixed

0~2.5A Dual 5A Fixed

0~1.5A Dual 5A Fixed

Constant voltage

characteristics

(CV mode)

Constant current

characteristics

(CC mode) 3mA 3mA 2mA

5V ±2.5% 3.3V/5V ±2.5% 5V ±2.5%

3A ±2.5% 5A ±2.5% 5A ±2.5%

Type

Accuracy

Resolution

Type

Accuracy

Resolution

Fan Fan Free Air

400VA-310W 400VA-300W 230VA-175W

Approx. 7.5Kg Approx. 9.5Kg Approx. 7.5Kg

2mVrms

0.1%±5mV

234 x 160 x 326mm

8mV

8mV

0.5mV

3mA

10mA

±200V

30MΩ@ DC 500V : AC input to Chassis

20MΩ@ DC 500V : Chassis to input terminal

±(0.5%+10mV) of master supply

3 digits Red LED

± (0.2% rdg + 2digits)

100mV

3 digits Red LED

Instruction manual, Power Cord, Test lead

Power Consumption

AC 115/230V Selectable

± (1.0% rdg + 3digits)

10mA

Green LED : CV, Red LED : CC

0 ~ 35 , 10 ~ 80% RH

-20 ~ 60 , 10 ~ 85% RH

Insulation Resistance

Input power Supply

Dimensions

Load regulation

Ripple and noise

Input regulation

Load regulation

Ripple and noise

Model

Output

Voltage

Current

Input regulation

Fixed output

Voltage

Current

Ripple and noise

Line & Load Regulation

Tracking Error (Slave)

Display

Voltmeter

Ammeter

LED Indicators

Temperature

Operating Temperature

Storage Temperature

Cooling Method

Max Voltage to Ground

Accessories

Weight

26

195W~315W TRIPLE OUTPUT LINEAR DC POWER SUPPLY

Features

• Triple outputs : 0~30V/0~3A Dual - 5V/3A Fixed (PS-2303)0~30V/0~5A Dual - 5V/3A Fixed (PS-2305)

• Over current protection• Constant voltage & constant current, low ripple & noise, and low temperature drift• Preset current limit point• In the tracking mode, two outputs are automatically connected in series or parallel

without extra cables.• In series mode, the instrument can be connected as positive and negative supplies. • Multi-tune potentiometer and easy to set up voltage• Output standby function• Overload protection

The PS‐2300 series are linear DC power supplies with 3 channels, 180W to 300W output. In constant voltage and current operations, the power supply provides high regulation and low ripple & noise. Auto series and parallel operations double output voltage and current.

The output ON/OFF control and preset voltage & current function protect the power supply and related loads from unexpected damages. The PS‐2300 series are widely used in applications of powering operational amplifier, push pull stages, logic circuit and definition systems.

PS-2305

PS‐2303 & PS‐2305

PS-2303

VOLTAGE CURRENT VOLTAGE CURRENT

PS-2303 0~30V 0~3A 5V 3A

PS-2305 0~30V 0~5A 5V 3A


27

Technical Specification PS‐2303 & PS‐2305

Model PS-2303 PS-2305

Output voltage 0~30Vx2, fixed 5V 0~30Vx2, fixed 5V

Output current 0~3A, fixed 3A 0~5A, fixed 3A



Recovery time

Ripple & Noise ≤1mV rms ≤2mV rms


Load regulation

Line regulation

Ripple & Noise

Line regulation: ≤0.01%+3mV Line regulation: ≤0.01%+3mV

Load regulation: ≤0.01%+3mV Load regulation: ≤0.02%+5mV

Output accuracy

Max.output current

Line regulation

Load regulation

Ripple & noise

Protection

Voltmeter display range 30V 30V

Display resolution

Display accuracy

Ammeter display range 3A 5A

Display resolution

Display accuracy

Display mode

Power source


Storage environment

Dimension

Weight 8.0KG 10KG

AC110V/220V, 50/60Hz

5~40, <80%

-10~70, <80%

245W*140H*345Dmm

≤15mV

≤2.0mVrms

Current limit and short circuit protections

Display

100mV

±0.5%+2d

10mA

±0.5%+2d

3 1/2 digit LED display

3A

≤15mV


≤0.2%+3mA

≤0.2%+3mA

≤3mA rms

Tracking operation

Parallel

Serial

Line regulation: ≤0.01%+5mV

Load regulation: ≤300mV

Slave error: ≤0.5%+10mV, master without load (with load, add load regulation≤300mV)


≤100us

≤300ppm/

Fixed output 5V/3A

5V±0.25V

28

• Built-in digital numeric display • Output : 0~30V/0~3A Dual• Constant voltage and current operation• Indicators for constant voltage, constant

current and overload operation • Low Power Consumption• Built-in current limiting circuit• coarse and fine voltage controls for

accurate voltage and current setting• Output polarity : (+), (-), GND,

positive or negative

180W DUAL OUTPUT LINEAR DC POWER SUPPLY

Features

PS‐3030DU

Technical Specification 0 ~ 30 V Dual

0 ~ 3 A Dual

Constant voltage 8mV

characteristics 8mV

(CV mode) 0.5mV rms

Constant current 4mA

characteristics 10mA

(CC mode) 3mA rms

Type 3 digits red LED

Accuracy ±(0.2% Rdg. + 2 digits)

Resolution 100mV

Type 3 digits red LED

Accuracy ±(1.0% Rdg. + 3 digits)

Resolution 10mA

Green LED : CV, Red LED : CC

30MΩ@DC500V : AC input to Chassis

20MΩ@DC500V : Chassis to input terminal

±200V

0 to 35 , 10 to 80% RH

-20 to 60 , 10 to 85% RH

Cooling Method

Free Air

AC115V/230V selectable

400VA / 320W

234 x 160 x 326mm(W×H×D), Approx. 7.5Kg

OutputVoltage

Current

Line regulation

Load regulation

Ripple and noise

Line regulation

Load regulation

Ripple and noise

Display

Voltmeter

Ammeter

LED Indicator

Insulation resistance

Dimensions & weight

Temperature

Input PowerPower

MAX. Voltage to ground

Operating TemperatureStorage TemperatureCooling Method

Power Consumption

Storage temp. and humidity range

29

180W~300W DUAL OUTPUT LINEAR DC POWER SUPPLY

Features


• Two independent adjustable outputs - PS-303DU : 0~30V x 2, 0~3A x 2- PS-305DU : 0~30V x 2, 0~5A x 2

• Constant voltage and constant current operations

• Low ripple & noise and low temperature drift• Auto Series and Parallel tracking operations • Output ON/OFF control • Over load and reverse polarity protections

PS‐303DU & PS‐305DU

Model PS-303DU PS-305DU

Output voltage 0~30V x 2 0~30V x 2Output current 0~3A x 2 0~5A x 2

Load regulation ≤0.01%+3mV ≤0.01%+3mVLine regulation ≤0.01%+3mV ≤0.02%+5mVRecovery timeRipple & Noise ≤1mV rms ≤2mV rmsTemperature co-efficient

Load regulationLine regulationRipple & Noise

Line regulation: ≤0.01%+3mV Line regulation: ≤0.01%+3mVLoad regulation: ≤0.01%+3mV Load regulation: ≤0.02%+5mV

Voltmeter display range 30V 30VDisplay resolutionDisplay accuracyAmmeter display range 3A 5ADisplay resolutionDisplay accuracyDisplay modePower sourceOperating / Store environmentDimensionWeight 8.0KG 9.0KG

AC110V/220V, 50/60Hz5 ~40 , <80%RH / '-10 ~70 , <70%RH

260W*160H*330Dmm

Display

100mV±0.5%+2 digits

10mA±0.5%+2 digits


≤3mA rms, ≤6mA rmsTracking operation

Parallel

Serial

Line regulation: ≤0.01%+5mVLoad regulation: ≤300mV

Tracking error: ≤0.5%+10mV of the master, no load ( with load, add load regulation ≤300mV)


≤100us

≤300ppm/Constant current operation

≤0.2%+3mA, ≤0.02%+5mA≤0.2%+3mA

30

180W~250W SINGLE OUTPUTLINEAR DC POWER SUPPLY

Features


PS‐3060/PS‐6030/PS‐5050

• Built-in digital numeric display • Output : 0~30V/0~6A, 0~60V/0~3A & 0~50V/0~5A• Constant voltage and current operation• Low Power Consumption• Built-in current limiting circuit• coarse and fine voltage controls for

accurate voltage and current setting• Output polarity : (+), (-), GND,positive or negative

31

Model PS-3060 PS-6030 PS-5050

Output Voltage 0 ~ 30 V 0 ~ 30 V 0 ~ 50 V

Output Current 0 ~ 6 A 0 ~ 6 A 0 ~ 5 A

Input regulation 5mV 8mV 12mV

Load regulation 5mV 8mV 12mV

Ripple and noise

Temperature coefficient

Input regulation 6mA 3mA 5mA

Load regulation 15mA 15mA 15mA

Ripple and noise 3mA rms 2mA rms 3mA rms

Temperature coefficient

Voltmeter indication

Accuracy

Ammeter indication

Accuracy

Between chassis and Input power supplyBetween chassis and output terminal Output polarity

Operating& Storage Temperature & Humidity

Ground proof voltage

Input power Supply

Approx. 10Kg Approx. 10Kg Approx. 15Kg


Constant Voltage Operaiton


Digital Meter Indication

1mV rms, 4mV P-P

100ppm/°C Typical

210 x 163 x 347mmDimensions & weight

DC500V 30MΩ

DC500V 20MΩ

AC100V/120V/220V/230V selectable, 50/60Hz

+(RED), -(BLACK), GND(GREEN), positive or negative grouding

0 ~ 40 , 10 ~ 80% RH / -20 ~ 60 , 10 ~ 85% RH

±200V

250ppm/°C Typical

Red 3-digit LED, Max 99.9V, fixed range

Output ON : ± (0.2% rdg + 2digits)



90W~150W SINGLE OUTPUT LINEAR DC POWER SUPPLY

Features


PS‐303 & PS‐305

• Built-in digital numeric display • Output : 0~30V/0~3A & 0~30V/0~5A • Constant voltage and current operation• Low Power Consumption• Built-in current limiting circuit• Coarse and fine voltage controls for accurate

voltage and current setting• Output polarity : (+), (-), GND, positive or negative

32

Model PS-303 PS-305

Output Voltage 0 ~ 30 V 0 ~ 30 V

Output Current 0 ~ 3 A 0 ~ 5 A

Input regulation 8mV 8mV

Load regulation 8mV 8mV

Ripple and noise 0.5mV rms, 4mV P-P 0.5mV rms, 4mV P-P

Input regulation 4mA 8mA

Load regulation 10mA 20mA

Ripple and noise 3mA rms 5mA rms

Voltmeter indication

Accuracy

Ammeter indication

Accuracy

Between chassis and Input power supply

Between chassis and output terminal

Output polarity

Operating & Storage Temperature/ Humidity

Ground proof voltage

Input power Supply

Dimensions

Weight Approx. 5Kg Approx. 5.5Kg

DC500V 20MΩ

+(RED), -(BLACK), GND(GREEN), positive or negative grouding

0 ~ 35 , 10 ~ 80% RH / -20 ~ 60 , 10 ~ 85% RH

±200V

AC115V/230V selectable

124 x 160 x 326mm






DC500V 30MΩ

Constant Voltage Operaiton


Digital Meter Indication

90W~300W SINGLE OUTPUT LINEAR DC POWER SUPPLY

Features


• Two digital panel meters• Constant voltage and constant current operation• High efficiency, light and compact design• Preset current limit point• Output standby function• Overload and Reverse polarity protections

33

PS-3010

PS-1303/1305/1603

Model PS-1303 PS-1305 PS-1603 PS-3010

0-30V Variable 0-30V Variable 0-60V Variable 0-30V Variable

5V Fixed 5V Fixed 5V Fixed

0~3A Variavle 0~5A Variable 0~3A Variable 0~10A Variable

1A Fixed 1A Fixed 1A Fixed


Load regulation ≤0.01%+3mV ≤0.02%+5mV ≤0.02%+5mV ≤0.02%+5mV

Recovery time

Ripple & Noise

Line regulation

Load regulation ≤0.2%+10mA

Ripple & Noise

Voltmeter display range 60V 30V

Display resolution

Display accuracy

Ammeter display range 3A 5A 3A 10A

Display resolution

Display accuracy

Display mode

Power source


Storage environment

Dimension 255 x 155 x 375 mm

Net Weight Approx. 4kg Approx. 5.6kg Approx. 5.6kg Approx. 9kg

≤2mV rms

Output Voltage

Output Current

≤0.01%+3mV

100mV

10mA


-10~70, <80%

165 x 130 x 330 mm

AC110V/220V, 50/60Hz

5~40, <80%



≤0.2%+3mA

≤3mA rms

Display

0.5% reading + 2 digits

1% reading + 2 digits

≤100us(50% load change, minimum load 0.5 A)

≤0.2%+3mA

30V

VOLTAGE CURRENT VOLTAGE CURRENTPS-1303 0~30V 0~3A 5V 1APS-1305 0~30V 0~5A 5V 1APS-1603 0~60V 0~3A 5V 1APS-3010 0~30V 0~10A

MODELVARIABLE OUTPUT FIXED OUTPUT

200W~100KW AC POWER SOURCE

Applications

• P.A.M (Power Amplifier Modulation) Type• CPU control• Digital control• Less than 1% Distortion• Constant voltage stability : ≤ ±0.2%• Constant frequency stability : ±0.01%• Overload protection• Remote control using RS-232C (Optional)

• Multi-P.W.M (Pulse Width Modulation) Type• Digital Control• I.G.B.T high frequency switch• Constant voltage stability : ≤ ± 0.5%• Constant frequency stability : ± 0.5%• Remote control using RS-232C (Optional)

• Multi-P.W.M (Pulse Width Modulation) Type• Digital control• I.G.B.T high frequency switch• High efficiency & low audible noise• Constant voltage stability : ≤ ± 1%• Constant frequency stability : ± 0.1%• Remote control using RS-232C (Optional)

ACP-PAM Series

ACPF-MPWM Series

AFC-MPWM Series

Features

• Development, Production, Test, etc. for electric & electronic equipment

• Frequency Conversion in various laboratories

• Motor Testing• Air Conditioner Testing

• Power Supply Testing• General Laboratory• Transformer Testing • Magnetic Testing• Reliability Testing• Standard AC power source

34

ACP / ACPF / AFC Series

MODEL OUTPUT VOLTGAGE VOLTAGE STABILITY OUTPUT FREQUENCY FREQUENCY STABILITY

ACP series 0~300V

(option : 0~700V)≤ ± 0.2%

50,60,400,40~999Hz(option : 10~5000Hz)

± 0.01%

ACPF series 0~300V ≤ ± 0.5% 50,60,45~500Hz ± 0.5%AFC series 0~300V ≤ ± 1.0% 50,60,45~65Hz ± 0.1%


Model # Combination

35

ACP / ACPF / AFC Series

ACP / ACPF / AFC ACP-300 ACP-500 -1K -2K -3K -5K -7.5K

Output Capacity 300VA 500VA 1KVA 2KVA 3KVA 5KVA 7.5KVA

ACP / ACPF / AFC -10K -15K -20K -30K -50K -75K -100K

Output Capacity 10KVA 15KVA 20KVA 30KVA 50KVA 75KVA 100KVA

Model ACP series ACPF series AFC series

Circuit Type P.A.M

(Power Amplifier Modulation)M.P.W.M

(Multi-Pulse Width Modulation)M.P.W.M

(Multi-Pulse Width Modulation)

Input Voltage

Input Frequency

Output Voltage 0~300V (option : 0~700V)

1PHASE or 3PHASE(Option)0~300V

1PHASE or 3PHASE (option)0~300V

1PHASE or 3PHASE (option)

Voltage Stability ≤ ±0.2% ≤ ±0.5% ≤ ±1%

Output Frequency 50,60,400,40~999 (option : 10~5000 )

50,60,45~500 Variable 50,60,45~65 Variable

Frequency Stability ±0.01% ±0.5% ±0.1%

T.H.D ≤ 1% ≤ ±3% ≤ ±3%

Protector

Frequency Meter

V.A-Meter

Temperature

Humidity

Output Wave

Optional Remote Control

True Sine Wave

Remote Control Function(RS-232C : Variable Voltage)Remote Multi-control (RS-485)

100V / 110V / 115V / 120V / 200V / 220V / 230V / 240V / 380V / 440V,1PHASE or 3PHASE(Option) (±10%)

50 / 60

Electronic Circuit / Over Load / Short Circuit

LED Digital Display

True RMS LED Digital Display

0~40

0~90%

25MHz~60MHz ARBITRARY WAVEFORM FUNCTION GENERATOR

Features

• Frequency range 1μHz~25MHz/40MHz/60MHz• 2 independent output channels at same frequency range for main waveforms• 4.5-inch TFT LCD display• Min. output amplitude 1mVpp (50Ω), total distortion 0.2%• Sampling rate 150MSa/s, vertical resolution 14 bits, waveform length 16k points• 6 standard waveforms, 50 built-in waveforms and 12 user-defined arbitrary waveforms• 10 sets save & recall for operating parameters• Modulations: AM, DSSC AM, FM, PM, ASK, FSK, BPSK• Synchronous output, external modulation input, trigger input, external reference input

and count input• Linearity/Logarithmic sweep signal and Burst signal• Channel coupling, parameter (frequency, amplitude, offset, phase) coupling and

point frequency replication tracking• Strong arbitrary waveform building software & support SCPI commands• Over voltage, over current, short circuit and reverse voltage protections• Standard interface: RS232, USB device, USB Host

36

The AFG‐2000 series arbitrary waveform/function generators with maximum frequency of 25MHz, 40MHz and 60MHz were designed based on Direct Digital Synthesis (DDS) technology providing high fidelity, low jitter performance function signal and arbitrary waveform signal.

The AFG‐2000 series are equipped with 150MSa/s sampling rate, 14 bits vertical resolution, ±1ppm high stability and high accuracy waveform output, 250MHz frequency counter as well as digital modulations of AM, DSSC AM, FM, PM, ASK, FSK, BPSK. Built‐in USB device, USB host and RS232 interface supports easy remote control. 4.3‐inch TFT LCD display, user‐friendly interface design and keyboard layout bring excellent operation experience for users.

AFG-2060AFG-2040

AFG-2025

AFG‐2025/2040/2060

37

Technical Specification AFG‐2025/2040/2060

AFG-2025 AFG-2040 AFG-2060

Sine 1μHz ~ 25MHz 1μHz ~ 40MHz 1μHz ~ 60MHz

Square 1μHz ~ 5MHz 1μHz ~ 10MHz 1μHz ~ 15MHz

Ramp 1μHz ~ 500kHz 1μHz ~ 1MHz 1μHz ~ 1MHz

Pulse 1μHz ~ 5MHz 1μHz ~ 10MHz 1μHz ~ 15MHz

Noise

Arbitrary

Total distortion

Square Rise/fall edge

Pulse Duty cycle & Edge jitter

Ramp Symmetry & Non-linearity

Noise Repeat cycle

Sampling rate

Vertical resolution

CHB range

Flatness (1kHz)

CHA level range

CHA accuracy

CHB accuracy

AM modulation depth

FM modulation deviation

PM modulation range

FSK

BPSK

ASK

Sweep mode & time

Trigger source

Mode & Interval time

Burst numbers

Pulse Pulse width

Overshoot & Edge jitter

18ns

0.1% ~ 99.9%, ≤150ps rms

0.0% ~ 100.0%, ≤0.1%, 5%~95% of signal

0.1Hz~250 MHz, 6 digits/s

Interface USB Device, USB Host, RS232

Power cord x1, Operation manual x1, Software CD x1, USB cable x1, RS-232 cable x1, BNC-BNC cable x1, Test lead x1

>50 years

Arbitrary1μSa/s ~ 50MSa/s

14 bits

Resolution & Accuracy 1μHz, ≤±5×10-5

Waveform

Model

Output Frequency

Range

30MHz white noise (-3dBm)

1μHz ~ 6.5MHz

Output waveform Sine, Square, Ramp, Pulse, Noise, Arb, DC

Waveform length 8~16384 points (CHA), 8~2048 point (CHB)

Vertical resolution & Sampling rate 14 bits, 150MSa/s

SineHarmonics distortion

< -70dBc, < 20kHz < -50dBc, 20kHz ~ 1MHz

< -40dBc, 1MHz ~ 30MHz < -30dBc, 30MHz ~ 60MHz

≤0.2% (20Hz ≤ f ≤100 kHz)

Output Characteristics

Amplitude

CHA rangeHigh impedance : 2mVpp~20Vpp ≤20MHz 2mVpp~10Vpp ≤60MHz

50Ω : 1mVpp~10Vpp ≤20MHz 1mVpp~5Vpp ≤60MHz

High impedance : 2mVpp~6Vpp ≤60MHz 50Ω : 1mVpp~3Vpp ≤60MHz

±0.1dB (<100kHz), ±0.3dB (100kHz ~ 10MHz) , ±0.5dB (10MHz ~ 60MHz)

Offset

High impedance : ±(10V DC~AC peak/2) 50 Ω : ±(5 VDC~AC peak/2)

50 Ω : ±(94.7 mV DC –AC peak/2)

±1% offset setting value ±0.25% amplitude setting value ±2mV

±1% offset setting value ±0.25% amplitude setting value ±3mV

CHB level rangeHigh impedance : ±(189.3 mV DC–AC peak/2)

Modulation

0.0%~120.0%

0 ~fc/2

0.0°~360.0°,

1μHz~Fsinemax (Sine), 1μHz~15MHz (Square/Pulse), 1μHz~1MHz (Ramp)

0.0°~360.0°

2mVpp~ 20Vpp

Dimension Chassis: 260Wx110Hx385D mm Instrument: 295Wx195Hx415D mm

Weight 4kg

Sweep

Burst

Frequency Counter range & resolution

Linearity/Logarithmic, 0.001s~1000s

Int/Ext/Bus, 1μ ~1000S, resolution 1μS

N Cycle/Gated

1~1000000, resolution 1

Power source AC100~240V, 47~63Hz, Max. 30VA

Accessories

28.5 ns ~ period - 28.5 ns

≤2%(CHA) (50Ω), ≤150ps rms

10MHz~20MHz ARBITRARY WAVEFORM &DDS FUNCTION GENERATOR

Features

38

The AFG‐1000 series arbitrary waveform/function generators with maximum frequency of 10MHz and 20MHz are designed based on Direct Digital Synthesis (DDS) technology providing flexible performance and system features for basic scientific and industrial requirements. The 8 bits resolution, 100MSa/s sampling rate, 1024 pts memory length, 32 built‐in waveforms and 8 user‐defined arbitrary waveforms create various waveforms for different needs.

The AFG‐1000 series have additional functions of multiple modulations FM, FSK, ASK and PSK, 200MHz external frequency counter, 40 sets memories and multiple protections. Stable output frequency, high accuracy and low distortion make TFG3600E series an ideal solution for an accurate and affordable signal source for industrial, scientific research and educational applications.

• Max. output frequency of 10MHz & 20MHz• 2 output channels• 3.5-inch TFT LCD display• Direct Digital Synthesis technology (DDS)• Min. output amplitude 1mV (50Ω) with good stability• Sampling rate 100MSa/s, vertical resolution 8 bit, waveform length 1024 points• Arbitrary waveform function (AFG-1010 & AFG-1020)• 32 built-in waveforms and 8 user-defined arbitrary waveforms• 40 sets save & recall for panel settings• Modulations: FM, FSK, ASK, PSK• Frequency sweep, amplitude sweep, burst and TTL output functions• Over voltage, over current, short circuit and reverse voltage protections• High speed rotary dial and keypad input• Standard RS-232 interface for PC remote control• Standard 200MHz external frequency counter

DFG-1010 & DFG-1020 AFG-1010 & AFG-1020

DFG‐1010/1020 & AFG‐1010/1020

39

Technical Specification DFG‐1010/1020 & AFG‐1010/1020

DFG-1010 DFG-1020 AFG-1010 AFG-1020

1μHz~10MHz 1μHz~20MHz 1μHz~10MHz 1μHz~20MHz

Harmonic distortion

Total distortion

Rise/fall time

Overshoot

Duty cycle

Sine 1μHz~10MHz 1μHz~20MHz 1μHz~10MHz 1μHz~20MHz

Square

Other

Resolution

Accuracy

Stability

Flatness

Output impedance

Range

Resolution

Accuracy

1%~99%

Frequency

≥40dBc (<1MHz); ≥35dBc (1~20MHz)

≤1% (20Hz~200kHz)

Model

Output frequency

Waveform

Output waveform32 built-in waveforms, including Sine, Square, Triangle, Ramp, Pulse, etc.

Waveform length 1024 points

Vertical resolution 8 bits

Sampling rate 100MSa/s

Sine

Stability ±5x10-6 /3hoursOutput characteristics

Resolution

Range 1μHz~5MHz

1μHz~1MHz

1μHz

Accuracy ±5x10-5

Square

≤35ns

≤10%

Offset

±10V (open circuit, attenuation 0 dB)

20mVdc

±(1%+20mVdc)

Sweep

Amplitude

Range

2mVpp~20Vpp (open circuit, ≤10MHz)

2mVpp~15Vpp (open circuit, 10MHz~15MHz)


20mVpp (amplitude>2Vpp); 2mVpp (amplitude<2Vpp)

±(1%+2mVrms) (open circuit, 1kHz, sine)

±0.5% /3hours

±5% (<10MHz); ±10% (>10MHz)

50Ω

Direction Up, Down, Up-Down

Mode Linearity, Logarithmic

Control Auto sweep or manual sweep

Parameter Frequency, Amplitude

Range Free to set start and stop point

Time 100ms~900s

Deviation 0%~20%

Frequency Modulation (FM)

Carrier signal CHA signal

Modulating signal CHB or external signal

8 user-defined arbitrary waveforms

40

DFG‐1010/1020 & AFG‐1010/1020

DFG-1010 DFG-1020 AFG-1010 AFG-1020

32 built-in waveforms, including Sine, Square, Triangle, Ramp, Pulse, etc.

CHB output characteristics

Burst


Trigger signal

Burst counts 1~65000 cycles

Internal TTL, External, Single

Output waveform

Model

Alternative rate 10ms~60s

Trigger source

Vertical resolution

Trigger source

Waveform

Frequency 10mHz~1MHz

Amplitude TTL, CMOS compatible, low<0.3V, high>4V

Amplitude range

CHB signal

TTL_B signal

1~65000 cycles


Burst counts

TTL_A signal

8 user-defined arbitrary waveforms

1024 points

8 bits

12.5MSa/s

Sine: 1μHz~1MHz; Other: 1μHz~100kHz

TTL output

Square, rise/fall time ≤20ns

ASK Free to set the hop amplitude and the carrier amplitude

PSK Hop phase: 0~360°, resolution: 1°

260x110x385mm

3.5kg

Interface


Weight

Dimension (WxHxD)

Key operation for all functions, Menu display, Rotary dial adjustment

Frequency range

Frequency resolution

Frequency accuracy

1μHz

±1x10-5

0~40, <80%RH

Power source AC110V/220V±10% selectable, 50/60Hz, Max. 45VA

Power cord x1, Operation manual x1, Software CD x1, RS-232 cable x1, Accessories

BNC-BNC cable x1, Test lead x1

3.5-inch TFT LCD

RS-232 interface

Frequency counter

1Hz~200MHz

100mVpp~20Vpp

Frequency range

General

Amplitude resolution

Display

Input amplitude

Operation characteristics

Carrier signal

Trigger signal

Output impedance

50mVpp~20Vpp (open circuit)

20mVpp

50Ω

Sampling rate

Shift Keying

FSK Free to set the hop frequency and the carrier frequency

CHB signal is used as burst signal

Waveform length

5MHz~20MHz LOW‐COST DDS FUNCTION GENERATOR

Features

• Max. output frequency of 5MHz/10MHz/20MHz• 2 output channels• Direct Digital Synthesis technology (DDS)• Min. output amplitude 1mV (50Ω) with good stability• Sampling rate 100MSa/s, vertical resolution 8 bits and waveform length 1024 points• 32 built-in waveforms• 40 sets save & recall for panel settings• Modulations: FM, FSK, ASK, PSK• Frequency sweep, amplitude sweep, burst and TTL output functions• Over voltage, over current, short circuit and reverse voltage protections• High speed rotary dial and keypad input• Standard 200MHz external frequency counter• RS-232 interface for PC remote control• RS232 cable & RS232 to USB cable provided

41

The DFG‐2000 series LOW‐COST function generators with maximum frequency of 5MHz, 10MHz and 20MHz were designed based on Direct Digital Synthesis (DDS) technology providing flexible performance and system features for basic scientific and industrial requirements. These models are equipped with 8 bit resolution, 100MSa/s sampling rate, 1024 pts memory length and 32 built‐in waveforms for various waveforms for different needs.

The DFG‐2000 series have additional functions of multiple modulations of FM, FSK, ASK and PSK, 200MHz external frequency counter, 40 sets memories and multiple protections. Low‐cost, stable output frequency, high accuracy and low distortion make DFG‐2000 series an ideal solution for an accurate and affordable signal source for industrial, scientific research and educational applications.

DFG-2020DFG-2010

DFG-2005

DFG‐2005/2010/2020

42


DFG-2005 DFG-2010 DFG-2020

1μHz~5MHz 1μHz~10MHz 1μHz~20MHz

Harmonic distortion

Total distortion

Rise/fall time

Overshoot

Duty cycle

Sine 1μHz~5MHz 1μHz~10MHz 1μHz~20MHz

Square

Other

Resolution

Accuracy

Stability

Flatness

Output impedance

Range

Resolution

Accuracy

Model

Output frequency

Waveform

Output waveform 32 built-in waveforms, including Sine, Square, Triangle, Ramp, Pulse, etc.

Sine≥40dBc (<1MHz); ≥35dBc (1~20MHz)

≤1% (20Hz~200kHz)

Square

≤35ns

≤10%

1%~99%




Accuracy ±5x10-5

Stability ±5x10-6 /3hoursOutput characteristics

Frequency

Range 1μHz~5MHz

1μHz~1MHz

Resolution 1μHz

Offset


20mVdc

±(1%+20mVdc)

Sweep

Amplitude

Range




20mVpp (amplitude>2Vpp); 2mVpp (amplitude<2Vpp)


±0.5% /3hours

±5% (<10MHz); ±10% (>10MHz)

50Ω






Time 100ms~900s

Deviation 0%~20%

Frequency Modulation (FM)


Modulating signal CHB or external signal

DFG‐2005/2010/2020

DFG‐2005/2010/2020

DFG-2005 DFG-2010 DFG-2020

Weight 3.5kg

Standard accessoriesPower cord x1, Operation manual x1, BNC-BNC cable x1, Test lead x1,Software CD x1, USB Cable x1, RS-232 cable x1


Interface Optional RS-232 interface

0~40, <80%RH



Operation characteristics Key operation for all functions, Menu display, Rotary dial adjustment

Display Mono LCD

Frequency counter

Frequency range

Input amplitude

1Hz~200MHz

100mVpp~20Vpp

Output impedance


±1x10-5

50mVpp~20Vpp (open circuit)

Carrier signal

Trigger signal

Burst counts

Trigger source

General

Frequency

Amplitude

Square, rise/fall time ≤20ns

10mHz~1MHz

TTL, CMOS compatible, low<0.3V, high>4V

TTL_B signal

1~65000 cycles


TTL output

Waveform

50Ω

CHB signal

Frequency accuracy

Amplitude range

Frequency resolution 1μHz

20mVpp

1024 points

8 bits

12.5MSa/s

Sine: 1μHz~1MHz; Other: 1μHz~100kHz



32 built-in waveforms, including Sine, Square, Triangle, Ramp, Pulse, etc.Output waveform

Waveform length

Vertical resolution

Sampling rate

Frequency range

Shift Keying


Burst counts

Trigger source

CHA signal

TTL_A signal

1~65000 cycles


ASK Free to set the hop amplitude and the carrier amplitude

PSK Hop phase: 0~360°, resolution: 1°

Alternative rate 10ms~60s

Burst

Carrier signal

Trigger signal

Model

43

40MHz ~ 60MHz DDS FUNCTION GENERATOR

Features

44

The DFG‐2040 & DFG‐2060 DDS function generators with high frequency of 40MHz and 60MHz are designed based on Direct Digital Synthesis (DDS) technology providing flexible performance and system features for basic scientific and industrial requirements.

The10 bits resolution, 180MSa/s sampling rate, 16k pts memory length, and 32 built‐in waveforms create various waveforms for different needs. PC software for USB and RS‐232 interfaces control and 200MHz frequency counter are provided.

These models have additional functions of multiple modulations FM, AM, FSK, ASK and PSK, 40 sets memories and multiple protections. Low‐cost, multi‐functional, high accuracy and low distortion make them an ideal solution for an accurate and affordable signal source for industrial, scientific research and educational applications.

DFG-2060

DFG-2040

• Max. output frequency of 40MHz & 60MHz• 2 output channels• Direct Digital Synthesis technology (DDS)• Min. output amplitude 1mV (50Ω) with good stability• Sampling rate 180MSa/s, vertical resolution 10 bits, waveform length 16000 points• 32 built-in waveforms• 40 sets save & recall for panel settings• Modulations: FM, AM, FSK, ASK, PSK• Frequency sweep, amplitude sweep, burst, CHA & CHB ADD and TTL output functions• Over voltage, over current, short circuit and reverse voltage protections• High speed rotary dial and keypad input• 200MHz external frequency counter • USB & RS-232 interface for PC remote control• USB cable & RS232 cable provided

DFG‐2040 & DFG‐2060

45

Technical Specification DFG‐2040 & DFG‐2060

DFG-2040 DFG-2060

40μHz~40MHz 40μHz~60MHz

Harmonic distortion

Total distortion

Rise/fall time

Overshoot

Duty cycle

Rise/fall time

Overshoot

Duty cycle

Sine 40μHz~40MHz 40μHz~60MHz

Square

Other

Resolution

Accuracy

Stability

Flatness

Output impedance

Range

Resolution

Accuracy

Waveform length 4~16000 points



Model

Output frequencyWaveformOutput waveform Sine, Square, Pulse, DC

Pulse

≤20ns

≤5%

0.1%~99.9%

Frequency

Sine≥50dBc (<1MHz);≥40dBc (1~20MHz); ≥30dBc (>20MHz)

≤0.5% (20Hz~200kHz)

Square

≤20ns

≤5%

50.00%

Accuracy ±(5x10-5+40mHz)Stability ±5x10-6 /3hoursOutput characteristics

Range 40μHz~20MHz

40μHz~10MHz

Resolution 40μHz (40μHz~2kHz); 40mHz (>2kHz)

Amplitude

Range

1mVpp~10Vpp (into 50Ω, ≤10MHz)

1mVpp~5Vpp (into 50Ω, 10MHz~40MHz)

1mVpp~2Vpp (into 50Ω, ≥40MHz)



2mVpp~4Vpp (open circuit, ≥40MHz)

20mVpp (amplitude>2V); 2mVpp (amplitude<2V)


±0.5% /3hours

±5% (<1MHz); ±10% (1~10MHz); ±20% (>10MHz)

50Ω



Time 100ms~600s

Offset


20mVdc

±(1%+20mVdc)

Sweep

Frequency Modulation (FM)Modulating signal Internal or external signal

Deviation 0%~20%




DFG‐2040 & DFG‐2060

DFG-2040 DFG-2060

Amplitude Modulation (AM)

Modulating signal Internal or external signal

Depth 0%~120%


Vertical resolution

Frequency resolution


Free to set the hop amplitude and the carrier amplitude

Hop phase: 0~360°, resolution: 11.25°

10ms~60s

ASK

PSK

Alternative rate

Output waveform 32 built-in w aveforms, including Sine, Square, Triangle, Saw tooth, Ladder, etc.


10mHz

±(1x10-5+10mHz)50mVpp~20Vpp (open circuit)

2mVpp

Frequency accuracy

Amplitude range


50Ω

8 bits

Sampling rate 12.5MSa/s

Frequency range Sine: 10mHz~1MHz; Other: 10mHz~100kHz

Burst frequency 10mHz~50kHz

Burst count 1~65000 cycles

Harmonic times 0.1~250.0 times

Harmonic frequency <1MHz

Output impedance

CHB signal is used as the harmonic signal of CHA

Coarse: 11.5°/step; Fine: 2°/step

Frequency of CHB 40mHz~1MHz

Amplitude TTL, CMOS compatible, low<0.3V, high>4V

Frequency counter

Frequency range 1Hz~200MHz

TTL output

Waveform Square, rise/fall time ≤20ns

Frequency Same as CHA signal

Model

Weight 3.5kg

Shift Keying


Standard accessoriesPower cord x1, Operation manual x1, BNC-BNC cable x1, Test lead x1,Software CD x1, USB cable x1, RS-232 cable x1


Interface USB and RS-232 interface

Operating environment 0~40, <80%RH


Operation characteristics Key operation for all functions, Menu display, Rotary dial adjustment

General

Trigger source Continuous, Single

Phase adjustment

100mVpp~20VppInput amplitude

46

10KHz ~ 200KHz LCR METER

Features

47

The LCR‐1000 series are high precision LCR meter with basic accuracy 0.1% and maximum measurement frequency 10kHz, 30kHz and 200kHz. The 5‐digit 4.3‐inch TFT LCD display gives easy reading.

The RS‐232 interface facilitates in remote control and analysis of measurement results. With its fast measurement speed, wide frequency range and low cost, the LCR‐1000 series are widely used in R&D, IQC, online quality control and automatic test system.

• 32-bit core processor• 5-digit 4.3-inch TFT LCD display• 2 signal source output impedance: 30Ω, 100Ω• 100 sets memories for internal storage/save• 500 memories for U disk storage/save• Support FAT16 and FAT32 files• Save the last parameter settings before power off• Standard interface : RS-232, HANDLER,

USB HOST• Optional interface : USB DEVICE, GPIB,

headset, FOOT.C foot switch

LCR‐1010/1030/1200

LCR-1010

LCR-1030

LCR-1200

48

Technical Specification LCR‐1010/1030/1200

Model LCR-1010 LCR-1030 LCR-1200

Test parameter

Basic accuracy 0.15% 0.10% 0.10%Equivalent circuitMathematical functionRange modeTrigger modeMeasurement speedAverage timesDelay timeCalibration functionMeasurement terminalDisplay modeDisplay

Output impedanceTest level 0.1V, 0.3V, 1V 0.1V, 0.3V, 1V 0.1V, 0.3V, 0.5V, 1VTest level accuracy

|Z|, R, X|Y|, G, BCLDQθ (DEG)θ (RAD)∆%

Comparator N/A 4-bin sorting 5-bin sorting

Standard interface Standard: RS232, USB HOSTOptional interface

Operating environmentPower sourcePower consumption

Accessories

DimensionsWeight

≤30VA4-terminal Kelvin test clip leads, 4 terminal test fixture, short circuit plate, RS232 cable, software CD, power cord, operation manual

265W*100H*340D mmApprox.3.5kg

| Z|, |Y|, C, L, X, B, R, G, D, Q, θLCR-7010: 100Hz,120Hz,1kHz,10kHzLCR-7030: 100Hz,120Hz,1kHz,10kHz，20kHz，30kHz

LCR-7200: 40Hz, 50Hz, 60Hz, 75Hz, 100Hz, 120Hz, 150Hz, 200Hz, 250Hz, 300Hz, 400Hz, 500Hz, 600Hz, 750Hz, 800Hz, 1kHz, 1.5kHz, 2kHz, 2.5kHz, 3kHz, 4kHz, 5kHz, 6kHz, 7.5kHz, 10kHz, 12kHz, 15kHz, 15.7kHz, 16.2kHz, 20kHz, 25kHz, 30kHz, 40kHz, 50kHz, 60kHz, 66.6kHz, 75kHz, 100kHz, 120kHz, 150kHz, 200kHz (38 points)

Fast: max.30, Medium: 10, Slow: 3 (times/second) ((≥1kHz))

Direct, ∆, ∆%, V/I (monitoring tested voltage and current)

5%

0.01m Ω - 99.999 MΩ0.0001µS - 99.999 S0.0001 pF - 9.9999 F0.0001 µH - 999.99 H0.0001 - 9.99990.0001 - 99999-179.99º -179.99 º

USB device, GPIBGeneral

Standard: RS232, USB HOST, HANDLER

-6.28318

0°C - 40°C, ≤80%RH110/220V±10%, 47~63Hz

Comparator and interface

Memory

-19.9998

100 sets memories for internal parameter settings storage/save500 sets for U disk parameter settings storage/save

Measurement display range

5 digit 4.3-in LCD displayMeasurement signal

30Ω, 100Ω

1-2550-60s, step 1msOpen circuit, Short circuit, Load5-terminal

Measurement function

Deviation and Percent DeviationAuto, Hold, Manual SelectionInternal, Manual, External, BUS

Test signal frequency

Series, Parallel

STANDBY POWER METERwith DATA LOGGER

HPM‐100A

A surprisingly large number of electrical products such as PC’s, TVs, Microwave ovens, Washers & Driers, Air conditioners, etc. cannot be switched off completely without being unplugged. These products draw power for 24 hours a day which power consumption we call “standby power.“

There are some meters in the market to measure this standby power. Unfortunately, cost for some meters is too high or their accuracy is poor for low‐cost ones. Wattman HPM‐100A is the best Standby Power Meter satisfying both price and accuracy featuring wide measurement input range, Data Logger, GUI Program, etc.

Features

• Data Logger function• GUI Program Gratuitous Supports• Measurement of standby and consumption power (0.009W~3,600W)• Simultaneous display of 4 values for Voltage, Current, Watt & Frequency• Wide measurement range : AC, V, A, W, PF, Hz, Wh, VA, Var, CO₂ , Ocosθ,

Electric charge, expelled volume• Easy to use with multi-consent (Plug & Play)• Electric charge calculation and expelled volume of CO₂ computation available• Battery or Adaptor no needed for measurement• Timely Set (1 hour ~ 24 hours)• Complied with IEC 62301 Safety Standard• Complied with EN 61010-1 Safety Standard• RS232 to USB cable provided

Wattman

49

HPM‐100AWattmanTechnical Specification

Applications

• Public institution & consumption union• Energy saving educational program• Home appliance stores• Electronic product line & service centers

Voltage AC 90V ~ 240V ±(0.3% reading+3 digits)

AC 100uA ~ 5mA ±(0.5% reading+3 digits)

AC 5mA ~ 10A ±(0.3% reading+3 digits)

AC 10A ~ 15A ±(0.4% reading+3 digits)

0.009W ~ 0.45W ±(0.5% reading+3 digits)

0.45W ~ 2,600W ±(0.4% reading+3 digits)

2,600W ~ 3,600W ±(0.5% reading+3 digits)

Reactive Power 0.009Var ~ 3,600Var ±(0.5% reading+3 digits)

Apparent Power 0.009VA ~ 3,600VA ±(0.5% reading+3 digits)

Power Factor ± 0.001 ~ 1.000 ± (0.5% reading+3 digits)

Wattage 0.000mWh ~ 9,990kWh ± (1.0% reading+3 digits)

Frequency 50Hz ~ 1000Hz ± (0.3% reading+3 digits)

Dimension

Weight

Current Measure Range

Current

Wattage Measure Range

Active Power (PF 1.0)

Voltage Measure Range

115 (W) x 200 (H) x 45 (D) mm

260 g

Power Factor

Frequency

Dimension & Weight

Wattage Measure Range

50

HPM‐100AWattman

GUI Program gratuitous supports

51

HPM‐100AWattman

① Data Logging display

② AC Input power

③ Data HOLD

④ PC Communication display

⑤ Wattage display

⑥ Frequency display

⑦ Power factor, CO₂ output & electric charge display unit

⑧ Currency display (＄￦￥€ )

⑨ Measured Active Power & Watt-hour display unit

⑩ Current : current usage display for the other measuring device

⑪ Voltage : voltage usage display for the other measuring device

⑫ Autoranging indication

52

ALL‐IN‐ONE UNIVERSAL SYSTEM US‐9170A

Features

• 10MHz DDS Function Generator• 2.7GHz Frequency Counter• Triple Output DC Power Supply• 4 ¾-dight Digital Multimeter

Technical Specification Digital Multimeter

Range Resolution Accuracy Remarks80mV 1µV800mV 10µV Input impedance:

8V 0.1mV 80mV~800mV>1000MΩ80V 1mV 8V~000V：10MΩ

800V 10mV1000V 0.1V

<80% Range:50Hz~20kHz >80% Range:50Hz~20kHz80mV 1μV ±(1.0% +50d) ±(5.0% +50d)800mV 10μV ±(1.0% +50d) ±(5.0% +50d)

8V 0.1mV ±(1.0% +50d) ±(5.0% +50d)80V 1m ±(1.0% +50d) ±(5.0% +50d)

750V 10mV Remark: Input impedance: 80mV~800mV>1000MΩ；8V~1000V: 10MΩ, Parallel capacitance: ＜100pF

50Hz~1kHz: <90% Range:±(1.0% +50d) & >90% Range:±(3.0% +50)

±(0.3% +10d)

±(0.05% +10d)

±(0.8% +10d)

Range Resolution Accuracy

DC Voltage Measurement

True RMS of AC voltage

53

US‐9170A

Range Resolution Accuracy Remarks80mA 1µA Fuse: F 250V 1A(800mA range) , 800mA 10µA Voltage drop: ≤800mV

8A 0.1mA ±(0.8% +10d) Max. input current: 20A（less than 15s）20A 1mA ±(1.5% +10d)

Range Resolution Accuracy Remarks80mA 1µA Fuses : F 250V 1A S 250V 15A800mA 10µA Voltage drop: ≤800mV

8A 0.1mA ±(1.5% +20d)Sensitivity : mA range is 50Hz~5kHz,

A range is 50Hz~400Hz20A 1mA ±(2.0% +20) Max. Input Current: 20A(up to 15 seconds)

- Resistor

Range Resolution Accuracy Remarks800Ω 0.01Ω ±(0.2% +10d) Overload protection8kΩ 0.1Ω 250Vrms80kΩ 1Ω

800kΩ 10Ω8MΩ 100Ω ±(0.3% rdg+10d)

80MΩ 1kΩ≤40MΩ：±(1.5 % +10)

＞40MΩ: ±(3.0% +10)- Frequency

Range Resolution Accuracy Remarks

999.99Hz 0.01Hz Overload protection: 250Vrms

9.9999kHz 0.1Hz Sensitivity: ≥200mVpp

99.99kHz 1Hz

999.99kHz 10Hz

6.0000MHz 100Hz

- Capacitor

Range Resolution Accuracy Remark

1nF 1pF

10nF 10pF

100

F

1µF 1n

10µF 10nF

100µF 100nF

- Temperature

Temperature Resolution Accuracy Remark

＜0 or 32 : ±(10% +5°), ≥0 or 32 & ≤1000 or 1832 :

-58 ~ 2502 0.1 ＞1000 or 1832: ±(3.0% +20°)

- Diode

Functio Range Accuracy / Resolution Remarks

Diode 3.0000V ±(3.0% +5d) / 0.0001VDiode positive voltage drop; overload

protection: 250Vrms- dBm

Function Range Accuracy Resolution

dBm-80.00dBm~ +80.00dBm

±1.0% 0.01dBm

±(0.5%+10d)

±(1.0% +20d

±(0.2% +5d)

100nF

-50 ~ 1372 0.1K Thermocouple Type

±(0.1% +5d)

±(5.0% +50d) Overload protection: 250Vrms

DC Current

True RMS of AC Current

54

DDS Function Generator

US‐9170A

Sine wave 0.1~10

0.1~2 (100mVpp~10Vpp,50Ω)

2~5 (100mVpp~2Vpp,50Ω)

Other waveform 0.1Hz~1 (TTL : 100KHz)

Overshot Characteristic

DC offset range(Vpp AC＋DC) ±10V(High Impedance) / ±5V(50Ω)

Type

Sweep frequency

Sweep range

Linearity or Log

Negative or positive

1~10

Sweep Frequency Characteristics

Attenuation

Amplitude flatness ±10%

50Ω±10%/600Ω±10%Output impedance

Frequency accuracy

Frequency stability

Max. resolution

±(5×10-5＋80m)

±50ppm(Long Term)

0.01

Amplitude Characteristics

Square waveFrequency range

≤5%

Square duty variable range 15％~85％(≤10)

Waveform asymmetry <1.5％＋20ns of period(≤100)

Output amplitude range 100mVpp~20Vpp(High Impedance)

Frequency characteristics

Sine, Triangle, Square

<20: -50dBc / 20~1: -40dBc / 1~10: -35dBc

Triangle linearity ＜1% (≤100)

Waveform type

Waveform characteristics

Attenuation

Sine harmonious wave distortion(1Vpp, 50Ω)

Sine wave distortion ≤1%(0.1Hz~100)

Square wave Rise/Fall time ≤50n (1, 50Ω, output voltage 5Vpp）

Square overshot:

Sweep frequency velocity 0.01~100

20dB / - Error: ±5%(±0.5dB)(open)

1% ~99%

Square wave output

RS232 Communication for DMM

It has function of RS232 communication which can make user record and save measured data conveniently.

Duty cycle

0.5Hz/1.0Hz/2.0Hz/10Hz/50Hz/60.24Hz/74.63Hz100Hz/151.5Hz/200Hz/303Hz/606.6Hz/

1250H/1666Hz/2500Hz/5000Hz

Description

3V approx.Voltage Amplitude

Frequency

The user should setup RS232 software disc to PC and connect to PC with RS232 cables.

55

Frequency Counter

DC Power Supply

US‐9170A

Input impedance

Resolution

±1×10-7/s ± time base error ± trigger error

10MHz, <±5×10-6(5ppm)

CHA: 35Vpp, CHB: 3Vpp

CHA: 1MΩ, CHB: 50Ω

[(±1×10-7/s) measured signal frequency]/ Strobe time

Input sensitivity

Freq measurement range

Measurement accuracy

Time base

Max. Input voltage

CHA: 1Hz~110 / CHB: 110~2.7

CHA: 40mVrms or 100mVpp(1~80), 70mVrms or 200mVpp (80~110)

CHB: 40mVrms(110~2.0), 70mVrms(2.0~2.7)

Output current

Load effect

Source effect

Max. output current

2A

≤ 3mVrms

0.1%＋70mV

0.1%＋60mV

21.1A

0~3A

0~30VOutput voltage

Output current

Ripple and noise

Voltage: ±1%＋2digit, Current: ±2%＋2digit

3.1A

0.1%＋15mV

0.1%＋30mV

≤3mVrms

Load effect

Source effect

Max. output current

Display accuracy

CH2 output (output port)


1A

≤3mVrms

0.1％＋50mV

0.1%＋30mV

1.1A

Output current

Ripple and noise

Load effect

Source effect

Max. output current

＋5V fix ±3%Output voltage

±15VfixedOutput voltage

Ripple and noise


Output amplitude

Output impedance

Low level ≤0.3V/high level ≥3.3V

50Ω ±10%

External amplitude

TTL Output:

Input impedance

Amplitude sensitivity

Amplitude depth

1kΩ

0~5Vpp±5%

0~100%

Ext amplitude freq range (Inner impedance 50Ω of modulation source) : 0.1~20

56

2MHz~10MHz SWEEP FUNCTION GENERATOR

Features

• 4-in-1 Sweep, Function & Pulse Generator and Frequency Counter

• Versatile waveforms for Sine, Square, Triangle, Ramp, Pulse, Sawtooth and DC outputs

• CMOS (FG-8102 only) • Built in 6 digits External Counter Display

measuring up to 100MHz• Internal and External linear Sweep control

from 1:1 to 100:1• Variable Symmetry for generating Sawtooth

and Pulse waveforms • TTL leveled Square waveform output • Variable DC Offset control• Variable Output level control with 20 dB

Attenuator and Amplitude control

FG-8105

FG‐8102/8105/8110

FG-8110

FG-8102

MODEL BANDWIDTH FREQUENCY COUNTERFG-8102 0.02Hz ~ 3MHz 50MHzFG-8105 0.05Hz ~ 5MHz 100MHzFG-8110 0.1Hz ~ 10MHz 100MHz

57


58

FG‐8102/8105/8110

FG-8102 FG-8105 FG-8110

0.02Hz to 2MHz in 7 Range 0.05Hz to 5MHz in 7 Range 0.1Hz to 10MHz in 7 Range

Flatness ±0.3dB to 3MHz ±0.3dB to 5MHz ±0.3dB to 10MHz

Distortion

Square wave Rise and Fall time Less than 120nSec Less than 25nSec Less than 25nSec

Triangle wave Linearity

Rise and Fall time

Output Level

5 to 15V ±2V N/A N/A

Input Voltage

Input Impedance

200mHz to 50MHz 200mHz to 100MHz 200mHz to 110MHz

Attenuator

Model

Sine, Square, Triangle, Ramp, Pulse, Sawtooth, TTL Leveled Square, DCCMOS (FG-8102 only)

Output Characteristics

Waveforms

± 2% of full scale

20Vp-p in open circuit, 10Vp-p into 50Ω Load

More than +/-5V (into 50ohm)

50Ω±5%

-20dB fixed and continuously variable

Frequency Range

Frequency Accuracy

Output Level

DC Offset Control

Output Impedance

Low pass Filter

Input Sensitivity

Time base

Max. Input Voltage

Approx. 10 Kohm

6digit Green LED, Overflow, Gate time, MHz, kHz, Hz, mHz (FG-8102)7digit Green LED, Overflow, Gate time, MHz, kHz, Hz, mHz (FG-8105 & FG-8110)

Display

External VCF Input

Waveform Characteristics

Less than 1% at 0.1Hz to 100KHz

Linear

Variable from 1 :1 to 100 : 1

Frequency Range

Rate

Symmetry Variation

Mode

Width

TTL Output

Sine wave

General

More than 99% at 0.1Hz to 100 kHz

Less than 25nSec

TTL Level ( H ; Higher than 2.4V, L ; Lower than 0.4V)

1 :1 to 10 : 1

CMOS Output Level (FG-8102 only)

0.5Hz to 50Hz(20mSec to 2Sec)

0 to 10V

+/- Timebase Error+/- 1Count

-3dB, 100kHz

100mVrms

10MHz Crystal, 20ppm

250Vpp

Frequency Counter Characteristics

Sweep Function Characteristics

Accuracy

115/230 VAC ±10%, 48 to 66Hz

0 to 50 (Accuracy specified at 25 ±- 5 )

240(W) X 270(D) X 90(H)mm / 2Kg (FG-8102), 3Kg (FG-8105 & FG-8110)

Power Cord, BNC Cable, Fuse, Instruction Manual

Operating Temperature

Dimension & Weight

Power Requirement

Standard Accessories

1.5GHz~3.0GHz UNIVERSAL COUNTER

Features

• Frequency measuring range

• 10MHz TCXO Internal Time Base• Time interval and Ratio measurement for input A & B• Period and Total measurement for input A• Trigger level adjustment for input A• Separate and Common mode selectable for input A & B• Slope mode selectable for input A & B• 9 Digit display with 0.01 mHz resolution in 1 Sec. (By Ext. Reference Signal)• RS-232C serial interface function for communicating with computer• High sensitivity External reference input function( Higher than 1.5 Vrms)• Reciprocal technique for high resolution at low counting frequencies• Self check function executed to perform a automatic self diagnosis of various counter

function• Push-scanning for selecting Function and Gate time• Low-pass filter(100 kHz, -3 dB) installed for removing noise signal in low frequency

measuring• AC/DC coupling function ( Selectable AC/DC Coupling )• 10:1 Input Attenuation ( Selectable x1/x10 Attenuator ) • Data hold function

59

FC‐8150U & FC‐8030U

FC-8030U

MODELFREQUENCY

INPUT AFREQUENCY

INPUT BFREQUENCY

INPUT C

FC-8150U 0.1Hz - 100MHz 0.1Hz - 100MHz 80MHz~1.5GHz

FC-8030U 0.1Hz - 100MHz 0.1Hz - 100MHz 80MHz~3.0GHz

FC-8150U


60

FC‐8150U & FC‐8030U

FC-8150U FC-8030U

Input A & B 0.1Hz - 100MHz 0.1Hz - 100MHzinput C 80MHz~1.5GHz 80MHz~3.0GHz

Input A & B 30mVrms 30mVrms

Input C 30mVrms

25mVrms(80MHz-150MHz)20mVrms(150MHz-2.0GHz)60mVrms(2.0GHz-3.0GHz)

Range

Resolution

Accuracy

Range 5Hz to 10MHz DC to 30MHz

Count Capa.

Range

L.S.D Display

Resolution

Accuracy

Range

L.S.D. Display

Accuracy

Frequency

Aging Rate

Temp.Stability

Line Voltage

Frequency

Amplitude

Impedance

Frequency

Input Level

Impedance

General

Power 115 or 230VAC +/- 10% ,48 to 66Hz

Operation Temperature 0 to 50 (Accuracy specified at 25 ±5 )

Dimension 240(W) x 270(D) x 90(H)mm

Weight Approx. 2.5Kg

Standard Accessories Power cord,BNC cable, Fuse, Instruction manual

1.5Vp-p

600 Ω

External Standard

Input

10MHz

1.5Vrms to 5Vrms

600 Ω

Multi Function for input A

Period

10mSec to 10Sec

1pSec to 1nSec depending on Gate time and input Signal

±Resolution±Trigger Error±1count

Totalize0 to 999999999(Max)

Comparison Function for Input A & B

Time Interval (A to B)

Ratio (A / B)

Time Base Characteristics

Internal Timebase

10MHz TCXO

Less than 5x10-6/month

Less than 5 x10-6 (0 to +50 )

Less than 1x10-6 for 10% variation

Frequency Standard

Output

10MHz

Input Characteristics

Terminal A, B, C

Sensitivity

Impedance A & B Input : 1 , 40pF, C input : 50Ω

Max. Input Voltage A & B Input : 250mVrms, C input : 3Vrms

Attenuator A & B Input : x1, x10

Low Pass Filter A & B Input : 100kHz, -3dB

Slope A, B

Trigger A Preset or Variable

+, - Selectable

Model

Display9 digit large green LED display, Overflow, Gate time,

mHz, Hz, kHz, MHz, nS, uS, mS, S, HOLD

Frequency Measurement

Range

Gate Time 0.01Sec, 0.1Sec, 1Sec, 10SecResolution 1mHz to 10Hz Accuracy ±Resolution±Timebase Error±1count

10mSec to 10Sec

100mSec

+/- L.S.D. +/- Trigger Error

+/- Resolution +/- 1count

A x N/B,N = 1 to 1000

+/- 1 Count of A +/- B Trigger Error +/- A

0.1Hz to 100MHz

1.5GHz~3.7GHz FREQUENCY COUNTER

Features

• Frequency measuring range

• 10MHz TCXO Internal Time Base• Period and Total measurement for input A• RPM measurement for input A• 9 Digit display with 0.01 mHz resolution in 1 Sec. (By Ext. Reference Signal)• RS-232C serial interface function for communicating with computer• High sensitivity External reference input function( Higher than 1.5 Vrms)• Reciprocal technique for high resolution at low counting frequencies• Self check function executed to perform a automatic self diagnosis of various counter

function• Push-scanning for selecting Function and Gate time• Low-pass filter(100 kHz, -3 dB) installed for removing noise signal in low frequency

measuring• AC/DC coupling function ( Selectable AC/DC Coupling )• 10:1 Input Attenuation ( Selectable x1/x10 Attenuator ) • Data hold function

61

FC‐8150 & FC‐8300

MODELFREQUENCY

INPUT AFREQUENCY

INPUT CFC-8150 0.1Hz - 100MHz 80MHz~1.5GHz

FC-8300 0.1Hz - 100MHz 80MHz~3.7GHz

FC-8150FC-8300


62

FC‐8150 & FC‐8300

FC-8150 FC-8300

Input A 0.1Hz - 100MHz 0.1Hz - 100MHz

input C 80MHz~1.5GHz 80MHz~3.7GHz

Input A 30mVrms 30mVrms

Input C 30mVrms

10mVrms(80MHz-2.0GHz)20mVrms(2.0GHz-3.0GHz)30mVrms(3.0GHz-3.2GHz)40mVrms(3.2GHz-3.5GHz)70mVrms(3.5GHz-3.7GHz)

Range

Resolution

Accuracy

Range

Count Capa.

Frequency

Aging Rate

Temp.Stability

Line Voltage

Frequency

Amplitude

Impedance

Frequency

Input Level

Impedance

Model

10mSec to 10Sec

1pSec to 1nSec depending on Gate time and input Signal

±Resolution±Trigger Error±1count

0 to 999999999(Max)

5Hz to 10MHz

General

Power cord,BNC cable, Fuse, Instruction manualStandard Accessories

Approx. 2.5KgWeight

Multi Function for input A

Time Base Characteristics

9 digit large green LED display, Overflow, Gate time, mHz, Hz, kHz, MHz, nS, uS, mS, S, HOLD

0.01Sec, 0.1Sec, 1Sec, 10Sec

±Resolution±Timebase Error±1count

1mHz to 10Hz

Display

Gate Time

Accuracy

Resolution

Sensitivity

Input Characteristics

Terminal A, C

Range

A Input : 1 , 40pF, C input : 50Ω

A Input : 250mVrms, C input : 3Vrms

Impedance

Max. Input Voltage

Frequency Measurement

Internal Timebase

RPM

Period

A Input : x1, x10

A Input : 100kHz, -3dB

115 or 230VAC +/- 10% ,48 to 66Hz

240(W) x 270(D) x 90(H)mm

Power

Dimension

600 Ω

Operation Temperature 0 to 50 (Accuracy specified at 25 ±5 )

Low Pass Filter

Attenuator

Totalize

Frequency Standard

Output

External Standard

Input 1.5Vrms to 5Vrms

10MHz

6 RPM to 900 x 106 RPM

10MHz TCXO

Less than 5x10-6/month

Less than 5 x10-6 (0 to +50 )

Less than 1x10-6 for 10% variation

600 Ω

10MHz

1.5Vp-p

4 ⅞‐DIGIT BENCH TRUE RMSDIGITAL MULTIMETER

DM-1170A

Features

• Large LCD, 80000 count Dual-display, Analog bar 21 sets• 50 measuring functions, with basic DCV, ACV, DCA, ACA, Ω, CAP, Hz, TEMP,

diode and Continuity measuring function, etc.• 18 types of frequency, frequency up to 80MHz, 1800 waveform outputs,

0.1%~99% duty cycle.• Simultaneous measure (AC+DC), (AC+Hz), (DC+dBm), (dBm+Hz), (Hz+Duty), ( + )• Auto data update and refresh, auto data hold, auto peak hold• 36-hour dynamic record: MAG, MIN, AVG, MAX-MIN (REL ), (REL%), setting upper & lower

limit, timing measurement• AC measuring adopts highly accurate true RMS measurement, with testing frequency

bandwidth and AC+DC measuring, capable of accurate true RMS measuring of any waveforms in AC range

• RS-232 interface• RS-232 to USB cable provided

DM‐1170A

63


DC 80.000mV, 800.00mV, 8.0000V, 80.000V, 800.00V, 1000.0V

AC 80.000mV, 800.00mV, 8.0000V, 80.000V, 750.0V

True RMS

DC ±(0.05% reading+5 digits)

AC ±(0.8% reading+50 digits)

DC 80.000mA, 800.00mA, 8.0000A, 20.000A

AC 80.000mA, 800.00mA, 8.0000A, 20.000A

True RMS

DC ±(0.2% reading+10 digits)

AC ±(0.8% reading+20 digits)

800.00Ω, 8.0000kΩ, 80.000kΩ, 800.00kΩ, 8.0000MΩ, 80.000MΩ

±(0.3% reading+5 digits)

0.50Hz~8.0000MHz


1.000nF, 10.00nF, 100.0nF, 1.000uF, 10.00uF, 100.0uF


-50.0~1372.0 / -58.0~2502.0±(2.0% reading+2 digits)

3V / 0.5Hz~5kHz / 1%~99%

±0.02%

Diode test, AC+DC, Continuity

250V RMS

Large backlit LCD, 2 parameters

80000.00

10MΩ

40Hz-50kHz

4 times/s; Analog bar 40 times/s

Manual range or Auto range

RS-232 interface


Power cord x1, Operation manual x1, RS-232 cable x1, Software CD x1, Test lead x1, Temperature probex1

260x110x385mm

Approx. 3kg

General

Measurement type

Accuracy

Resistance

Frequency

Capacitance

Temperature

Square wave output

Special functions

Voltage

Current

Overload protection

Range

Measurement type

Accuracy

Range

Accessories

Dimension (WxHxD)

Weight

Display

Counts

Input Impedance

AC frequency response

Sampling rate

Range selection

Interface

Power source

DM‐1170A

64

BENCH DIGITAL MULTIMETER

DM‐1140B & DM‐1150B

• 4 ½-digit (19999count), bench type, large LCD of white backlight, easy to read

• Manual Range operation• Sample Rate : 3 times per sec• Overload protection• With basic DCV, ACV, DCA, ACA, Ω, CAP,

Hz, hFE, Diode and Continuity measuring functions.

• Voltage test range up to 1000V DC or peak-peak value AC, resolution up to 10uV.

• Current test range up to 20A, auto polarity shift, data hold

• AC measuring adopts high accuracy true RMS, measuring broadband and AC+DC function, enabling accurate measuring of virtual value of AC by any waveform

• 4 ⅞‐DIGIT Large LCD, 80000 count Dual-display AND Analog bar 21 sets

• 50 measuring functions, with basic DCV, ACV, DCA, ACA, Ω, CAP, Hz, TEMP, diode and Continuity measuring function, etc.

• 18 types of frequency, frequency up to 80MHz, 1800 waveform outputs, 0.1%~99% duty cycle.

• Simultaneous measure (AC+DC), (AC+Hz), (DC+dBm), (dBm+Hz), (Hz+Duty), ( + )

• Auto data update and refresh, auto data hold, auto peak hold

• 36-hour dynamic record: MAG, MIN, AVG, MAX-MIN (REL ), (REL%), setting upper & lower limit, timing measurement

• AC measuring adopts highly accurate true RMS measurement, with testing frequency bandwidth and AC+DC measuring, capable of accurate true RMS measuring of any waveforms in AC range

• RS-232 interface

65

4 ½‐DIGIT & 4 ⅞‐DIGIT TRUE RMSBENCH DIGITAL MULTIMETER

Features Features

DM-1140BDM-1150B


66

DM‐1140B

Technical Specification DM‐1150B

67

Spec. Range Resolution Remarks

80mV 1μV800mV 10μV8V 0.1mV80V 1mV800V 10mV1000V 0.1V

80mV 1μV<75% Range:

50Hz~20kHz

<75% Range:

20kHz~50kHz

>75% Range:

50Hz~20kHz800mV 10μV8V 0.1mV80V 1mV

80mA 1μA800mA 10μA8A 0.1mA20A 1mA80mA 1μA800mA 10μA8A 0.1mA20A 1mA800Ω 0.01Ω8kΩ 0.1Ω80kΩ 1Ω800kΩ 10Ω8MΩ 100Ω

999.99Hz 0.01Hz9.9999kHz 0.1Hz99.999kHz 1Hz999.99kHz 10Hz8.0000MHz 100Hz10.0MHz 1kHz100.0MHz 10kHz1000.0MHz 100kHz1nF 1pF10nF 10pF100nF 100pF1μF 1nF10μF 10nF100μF 100nF

50 ~1300 0.0 58 ~2372 0.1 -80.00dBm~+80.00dBm

Temp. ±(1.5% rdg+10)

±1.0% rdg

±(0.2% rdg+10)

±(0.5% rdg+10)

±(0.2% rdg+10) / 50Hz~5kHz

DCA

Diode 3.0000V 0.0001V ±(3.0% rdg+5)

Frequency

±(0.5% rdg+5)

±(0.1% rdg+5)

Accuracy

DCV

±(3% rdg+10)

±(0.05% rdg+5)

±(0.08% rdg+10)

ACV(T-RMS) ±(0.8% rdg+50) ±(6.0% rdg+50) ±(8.0% rdg+50)

750V 10mV ± (0.8% rdg+50) (at <90% Range), 50Hz~1kHz ± (5.0% rdg+50) (at >90% Range), 50Hz~1kHz

Voltage amplitude : Approx.3V / Frequency : 0.5Hz~5000Hz / Duty cycle : 1%~99%Square Wave Output

Max.input current: 20A

(up to15 seconds)

ACA(T-RMS)±(0.5% rdg+10) / 50Hz~500Hz

Max.input current: 20A

(up to15 seconds)

Resistance

±(0.3% rdg+10)

Overload protection: 250V RMS

Sensitiv ity : 0.7V RMS±(0.3% rdg+5)

Plus adapter(Optional)

Capacitance

±(5.0% rdg+50)

Overload protection: 250V RMS±(2.5% rdg+50)

dBm

80MΩ 1kΩ0Ω~40MΩ: ±(2.5% rdg+10)

40MΩ~80MΩ: ±(3.5% rdg+10)

0.01dBm

Input impedance :

80mV~800mV: >1000MΩ;

8V~1000V: 10MΩ.

Input impedance :

80mV~800mV: >1000MΩ;

8V~1000V: 10MΩ.

Parallel capacitance: <100pF


Diode positive voltage drop

Overload protection: 250V RMSK type thermocouple


Fuse: F750Ma/250v F13A/250V

Voltage drop: ≤800mV

Fuse: F750Ma/250v F13A/250V

Voltage drop: ≤800mV

HANDHELD DIGITAL MULTIMETERDMM 188


• 3 ½-digit Manual Range Digital Multimeter• Large LCD makes reading easy and clear• Strong anti-magnetic and anti-jamming performance• Auto power off within 30 minutes• Full protection function, anti high voltage circuit design

(voltage dependent resistor 1300V) • Unit and function symbols display• Capacitance test range up to 2000Uf• Self-discharge when capacitance measuring • Peak value hold • Frequency auto ranging, up to 10MHz

68

Features

3 ½‐DIGIT HANDHELD DIGITAL MULTIMETER

ModelBasic function Range AccuracyDCV 200mV/2V/20V/200V/1000V ±(0.5%+3)ACV 200mV/2V/20V/200V/750V ±(0.8%+5)DCA 2mA/20mA/200mA/20A ±(0.8%+3)ACA 2mA/20mA/200mA/20A ±(1.0%+5)Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ/2000MΩ ±(0.8%+3)Inductance 2mH/20mH/200mH/2H/20H ±(3.0%+10)Capacitance 20nF/200nF/2uF/20uF/2000uF ±(3.0%+10)Frequency 2kHz/20kHz/200kHz/2000kHz/10MHz ±(0.5%+4)Temperature -40～1000 ±(0.8%+4)

Diode test √hFE test √Continuity alarm <30Ω±10ΩLow battery indication Approx. <7.5VData hold Peak value holdAuto power off Approx. 30 minutesFunction protection √Anti-shock protection √Input impedance 10MΩSampling rate 3 times/sAC frequency response 40-400HzRange selection Manual range (Frequency: Auto range)Max. display 1999LCD size 65×41mmBattery 9V 6F22Power dissipation Quiescent current approx. 6mAMeter size 185×93×35mmNet weight 290g(including battery)

DMM 188

Special function

BENCH DIGITAL MULTIMETER

DMM 197 & 199


• 4000/6000 Auto Range Digital Multimeter

• Large LCD makes, Unit and function symbols display, easy and clear reading

• Strong anti-magnetic and anti-jamming performance

• Auto power off within 15 minutes• Full protection function• Capacitance test range up to 2000uF (Model 199)• Relative value, frequency/duty cycle measuring,

data hold

69

Features

3 ¾‐DIGIT & 3 ⅚‐DIGIT HANDHELD DIGITAL MULTIMETER

DMM 197 3 3/4-digit 4000 counts

DMM 199 3 5/6-digit 6000 counts

DMM 197 DMM 199Basic function Range

400mV/4V/40V/400V/1000V ±(0.5%+4)600mV/6V/60V/600V/1000V ±(0.5%+3)400mV/4V/40V/400V/750V ±(0.8%+6)6V/60V/600V/750V ±(0.8%+5)400uA/4000uA/40mA/400mA/4A/20A ±(1.0%+5)600uA/6000uA/60mA/600mA/6A/20A ±(1.0%+3)400uA/4000uA/40mA/400mA/4A/20A ±(1.5%+5)600uA/6000uA/60mA/600mA/6A/20A ±(1.2%+5)400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(0.8%+1)600Ω/6kΩ/60kΩ/600kΩ/6MΩ/40MΩ ±(0.8%+3)4nF/40nF/400nF/4uF/40uF/400uF/200uF ±(2.5%+6)40nF/400nF/4uF/40uF/400uF/2000uF ±(2.5%+5)

Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/30MHz ±(0.5%+4) ±(0.5%+4)0~1000 ±(0.8%+4) ±(0.8%+4)0~1832 ±(0.8%+5)

Diode testhFE testAnalog barContinuity <50Ω±10Ω <30Ω±10ΩLow battery Data hold √ MAX, MIN, HOLDAuto power offFunction Anti-shock Input Sampling rateAC frequency Range Max. display 4000 6000LCD sizeBatteryPower AccessoriesMeter size &

ModelAccuracy

Special function

ACA

Resistance

Capacitance

Temperature

DCV

ACV

DCA

65×41mm2×1.5V AAA

Quiescent current approx. 2mATest lead, Battery, User manual, Temperature probe

185×93×35mm, 290g (including battery)

10MΩ3 times/s40~400Hz

Manual range or Auto range

Approx. <2.4V

Approx.15 minutes

√√√

√√

60MHz~200MHz DIGITAL STORAGE OSCILLOSCOPE

Features


DS‐1065/1100/1200

• 60MHz/100MHz/200MHz bandwidth• 500MS/s to 1GS/s real-time sample rate• 50GS/s sample rate for repetitive waveforms• 1M Memory• 2mV/div to 50V/div Vertical Sensitivity• High resolution color LCD display• USB storage, RS232C , optional J45 interface• 4000 point record length for each channel• Multi-waveforms math, FFT Function• Built-in delay sweep function• Automatic Multi-waveform Measurement• Cursor & Track measurement• Waveform Record & Recall• Trigger Mode for Edge, Video, Pulse Width,

Slope & Alternate• Pass & Failure for ordinary setting and

waveform setting• Calibration Signal with optional frequency of

1KHz,10KHz &100KHz• 10 groups of waveform storage, CSV storage,

10 groups of setting and position storage

70

Model DS-1065 DS-1100 DS-1200

Bandwidth 60MHz 100MHz 200MHz

Channel

Vertical Resolution

Vertical Sensitivity

Simulation bandwidth

Rising time ≤5.8ns ≤3.5ns ≤1.8ns

Input impedance

Max safe input voltage

CH1, CH2

Vertical system

8 bit

2mV/div -50V/div, 1-2-5 14 step

-3dB

1MΩ ±2%, 20pF±5

400V(DC+AC peak) / Frequency≤400Hz (when input impedance is 1MΩ)

MODEL BANDWIDTH SAMPLING RATE

DS-1065 60MHz 500MSa/s

DS-1100 100MHz 1GSa/s

DS-1200 200MHz 1GSa/s

71

DS‐1065/1100/1200

Model DS-1065 DS-1100 DS-1200

ModeSampling Rate 500MS/s 1GS/s 1GS/s Equivalent sampling rate 50GS/s 50GS/s 50GS/s Waveform interpolation Record length Horizontal working mode Primary sweep, primary sweep + delay expansion sweep and X-Y / 1-2-5 Timebase range 50s/div~10ns/div 50s/div~5ns/div 50s/div~1ns/divTimebase accuracy

Trigger source

Auto trigger range

Trigger level range

Measurement

Auto measure

Display

Display screen

Display type

Display mode

Output interface

Storage

Power supply

Temperature

Humidity

Size & Weight

Working : 40 / (20~90)%RH / Storage : 50 / 90%RH, 24h

300mm×150mm×130mm, 2.5Kg (net weight)

General

Normal, Flat, Average, Peak value, Afterglow

USB, RS232, J45 Ethernet interface(Optional)

Setting / Waveform storage : 10 groups

AC 100V~240V ±10% / 45Hz~440H / about 25W

Working: 0 ~+40 / Storage : -40 ~+60

positive ratio, negative ratio, delay 1-2

Display 5.7 inch color LCD display

320pixel(horizontal)× 234pixel (vertical)

dot, vector

bottom value, amplitude value,

root-mean-square value, average value, overshot, pre-shot, damp.

Time parameter

: cycle, frequency, rising time, fall time,

positive pulse width, negative pulse width,

Slope trigger ：more than, equal to and less than setting time

Cursors

Voltage parameter

: Max, Min, peak-peak value, top value,

Ｖ, T, 1/ T

Trigger mode

100Hz~100MHz square signal

Int. trigger：±4div / Ext. trigger：±1.6V

Edge trigger : Rise along, drop along

Impulse trigger : More than, equal to and less than setting pulse width.

Video trigger : TV-V, TV-H

Trigger

X-YPhase potential difference ：≤3° when 5MHz

CH1, CH2, EXT, city electricity

inner：≥1div (frequency upper limit is 40MHz)

Trigger sensitivity

≥2div (frequency is more than 40MHz)

≥2div, Ｖ, T, 1/ T

out ：≥100mVp-p frequency upper limit is 40MHz

≥200mVp-p frequency is more than 40MHz

≥200mVp-p, TV-V, TV-H video trigger

Horizontal system CH1, CH2, CH1±CH2, CH1×CH2, CH1/CH2, FFT

Sin(x)/x ≥4kB/CH, expandable to 256MB or 512MB

±100ppm

X (CH1) frequency bandwidth : DC ~ full bandwidth (-3dB)

30MHz~100MHz REALTIME OSCILLOSCOPE

Features

OS‐9030A/9060A/9100A

• DC to 100MHz bandwidth• A & B dual time base sweep displayed sync. • High sensitivity up to 1mV/div • Magnification setting for ∆T of main sweep

A via delay sweep B • Hold off function • Fine outline & high performance ratio • Sweep rate : 0.1uS/div to 0.2s/div • Max. input : 400V(DC+ACpeak) at

AC freq ≤ 1KHz

• DC to 30MHz bandwidth• 2 Channel, Dual Trace• High sensitivity up to 1mV • Auto triggered sweep in full range • Flexible trigger source select• Alternate trigger function• Trigger signal output• Sweep rate : 0.1uS/div to 0.2s/div• Max. input voltage : 400V(DC+ACp-p)

Features

Features

• DC to 60MHz Bandwidth• 2 Channel, Dual Trace• High sensitivity up to 1mV/div• High light graduation illumination• Displayed x1 and Mag trace after Mag. • Stable TV-H & TV-V signal • Auto focus• Trigger level lock

OS-9030A

OS-9060A

OS-9100A

72


73

OS‐9030A/9060A/9100A

Model OS-9030A OS-9060A OS-9100A

Bandwidth (-3dB)DC : 0~30MHz

AC : 10Hz~30MHzDC : 0~60MHz

AC : 10Hz~60MHzDC : 0~100MHz

AC : 10Hz~100MHzBandwidth at MAG (-3dB)

DC : 0~5MHzAC : 10Hz~5MHz



Mode CH1,CH2,ALT,CHOP,ADD,X-Y

Deflection Factor5mV/div ~ 10V/div in

1-2-5 step, 11 steps, ±5%Rising Time ≤12ns, ≤70ns by MAG ≤6ns ≤3.5nsOvershoot ≤8%Input Impedance ≤5%Input CouplingMaxium Input Voltage 400V(DC+AC peak) 300V(DC+AC peak) 400V(DC+AC peak)Polarity Inverter

Output voltage Minimum 20mV/div Minimum 20mV/divOutput impedance Approximately 50Ω Approximately 50ΩBand width 50Hz to 5MHz (-3dB) 50Hz to 5MHz (-3dB)

Sweep mode ×1, ×5 ; ×1, ×5ALT ×1, ×5 ; ×1, ×5ALT A, B, B TRIG’D, X-Y, ALT

Sweep time 0.1μs to 0.2s/div±5% 0.1μs to 0.2s/div±5%A: 0.05μs to 0.2s/DIV±5%B: 0.05μs to 10s/DIV±5%

Sweep expansion 10ns/div to 20ms/div 10ns/div to 20ms/div ×10 MAG: 8%

Delay System Continuous or Triggering Delay Time 0.2μs～2sHold-off Continuous change for 2 times

Trigger source CH1,CH2,ALT,LINE,EXTTrigger Mode AC/DC(EXT), NORM/TVPolarity

Trigger Value5Hz ~ 30MHz

INT: 1div / EXT: 0.2Vp-pDC~60MHz

INT : 2div / EXT : 0.5VDC~100MHz

INT : 2div / EXT : 0.5VTV Sync INT: 2div EXT: 0.3Vp-p INT: 2div EXT: 1Vp-p INT: 2div EXT: 1Vp-p Ext. Trig 1±5%MΩ∥≤30pF

Sweep Mode AUTO, TRIG, LOCK, SINGLE

Sweep Time Factor0.1μs/div～0.2s/div in

1-2-5 sequenceSweep Mag ×10 MAG: 5%

Delay Time 0.2μs～2s

Hold-off Continuous or trigged

Signal InputDeflection

Frequency responseAC: 10Hz~1MHz -3dB

DC: 0~1MHz –3dBDC~2MHz DC~2MHz

Input Impedance ≤5% 1MΩ±2% , 25pF±3 pFX-Y phrase error ≤3°(DC～50kHz) ≤3°(DC～50kHz) ≤3°(DC～100kHz)

Maxium Input Voltage 50V(DC+ACp-p) 30V(DC+ACp-p) 30V(DC+ACp-p)Input Impedance 10kΩ 33kΩ 40kΩFrequency DC ～5MHz DC ~ 2MHz DC ~ 2MHz

TypeEffective Screen

Vertical system

5mV/div to 5V/div 1-2-5 step, 10 steps (1mV/div to 1V/div at ×5 MAG) Accuracy

1MΩ ±2%, 25pF±3pFAC-GND-DC

CH1, CH2, ADD, DUAL (CHOP, ALT)

≤5%

6 inch square internal scale8cm×10cm(1cm=1div)

X-Axis: CH1 Y-Axis: CH2Same as Vertical System

Z-Axis System

Horizontal system

A : 0.05uS/div ~ 0.2S/div ±5%, 1-2-5, 21 stepsB : 0.05uS/div ~ 10uS/div ±5%, 1-2-5, 8 steps

CRT

CH1 Input Amplifier

Time Axis

X-Y

A, B, B TRIG’D, X-Y, ALT

CH2 only

＋,－AUTO, NORM, TV-V,TV-H

INT, CH2, LINE, EXTTrigger

FM/AM SYNTHESIZED SIGNAL GENERATOR

Features

SG-1501B

SG-1710

The model SG‐1501B is synthesized Signal Generator which has frequency range from 100kHz to 150MHz. It generates CW and FM/AM modulation signals, its output range is from ‐20dBμto126dBμ. This advanced FM/AM signal generator can be controlled by external equipment through GPIB interface.

The model SG‐1710 is a high‐performance general purpose 200kHz to 1000MHz synthesized signal generator with low phase noise and very good FM/AM capability. The product is designed for manual as well as ATE applications and is ideally suited for various test tasks during product development and manufacturing of RF products such as cellular radios or cordless phones.

• High accuracy with 100Hz in full range• Output level can be specified by 0.1dB step

between -20dBμ to 126dBμ.• Presetting function for simple operation.• STEREO Function• Compact size and light weight.• Crystal oscillator stability : 5 × 10-6 (5ppm)• GPIB Interface (Option)

Features

• High performance frequency synthesis using DDS.

• High resolution output frequency, 1Hz• FM deviation up to 100kHz• AM up to 100%• Wide range output for receiver test :

127dBm ~ 13dBm• Reverse Power Protection ( RPP ) 25W max.• Store-recall up to 300 front panel settings.• Standard GPIB & RS-232C Interface

74

SG‐1501B & SG‐1710


75

SG‐1501B

Range 100kHz~150MHz (76MHz~110MHz, FM Stereo)

Resolution 100Hz

Accuracy 5×10⁻(5ppm)

Range

-20dBμ ~126dBμ at open circuit (-133dBm ~ 13dBm into 50Ω termination)

Resolution 0.1dB

Accuracy ±1dB at 100 dBμ

Attenuator Accuracy ±1.5dB(126~100 dBμ) , ±1dB(20~100 dBμ) ±2dB(-20~20 dBμ)

Output Impedance 50Ω, VAWR less than 1.2

Spurious & Harmonics ≤-30dBc

Residual Modulation(S/N) FM Component : 70dB or more AM Component : 50dB or more

Internal Modulation Frequency : 400Hz, 1kHz

External Modulation Input Impedance: 10kΩ unbalanced±10% Input Voltage : 3Vp-p±2%

FM Range 0~100kHz (at 1MHz~150MHz) Carrier Frequency×10% (at＜1MHz) Carrier Frequency×10%

- Accuracy ±10% of maximum frequency deviation

- Pre-Emphasis off, 25usec,50usec,75usec

- Distortion

<0.06% (at 10.7MHz, 76~110MHz)<0.11% (at other range); with Dev=75kHz, AF1kHz,Demod.BW=50Hz~15kHz,DE-emp.=50ec

AM Range 0~60%

- Resolution 0%

- Accuracy ±5% at internal rate(100kHz~110MHz) ±10% at internal rate(110MHz~150MHz)

- Distortion <0.65% (at 400kHz~30MHz) < 1.5% (at other range) with Depth =30% , AF 1kHz,Demod. BW=50Hz~15kHz

Separation ≥50dB(at 400Hz~1kHz)≥35dB(at 100Hz~10kHz)≥30dB(at 50Hz~15kHz)

Pilot 19kHz ±2Hz

Distortion ＜0.07% (at Main 90%,Pilot off)

Preset Keys FM : 3.5kHz, 22.5kHz, 75kHz AM : 30% Stereo : 30%, 100% Output Level : 4points

Memories 100 points

Power Requirements 115/230VAC, 50/60Hz

Dimensions 115(H) × 430(W) × 310(D) mm

Weight Approx. 7kg

Standard Accessories Power Cable, BNC Cable, Operating Manual, Fuse

Option GPIB

FREQUENCY

OUTPUT LEVEL

MODULATION

STEREO

MEMORY

GENERAL


76

SG‐1710

200kHz ~ 1000MHz

VFD

1Hz

0.5ppm

-14dBu ~ 126dBu at open circuit (-127dBm ~ 13dBm)

0.1dB

±1.0dB > -37dBm, ±(1.5dB+0.1dB/10dB) ≤ -37dBm

50Ω, VAWR less than 1.5

± 1.2dB at 0dBm

≤ -30dBc

≤ -25dBc above 550MHz

< -50dBc (<-137.5MHz), < -60dBc (137.5 ~ 1000MHz)

FM < 30Hz(CF:<137.5MHz),<5Hz(CF:137.5~275MHz)< 10Hz(CF:275~550MHz),<20Hz(CF:550~1000MHz)

AM <-65dBc

MAX 25W

400Hz or 1kHz

10Hz ~ 20kHz

External ModulationInput Impedance: 600Ω unbalancedInput Voltage : 1Vpeak

Deviation Range 0~100kHz

Resolution 100Hz

Accuracy ±6% of programmed setting

Distortion Less than 2% by 1kHz AF Signal

Range 0 ~ 100% (≤ 7dBm)

Resolution 0.1%

Accuracy±1%+(±5% of programmed setting)

Distortion <5%(70~90% AM)<3%(30~70% AM)<1.5%(0~30% AM)

MEMORY CONTROL 300point

115/230VAC, 50/60Hz

115(H) × 430(W) × 410(D) mm

Approx. 14kg

Power Cord, Output Cable, Operating Manual, Fuse

FREQUENCY

OUTPUT LEVEL

MODULATION

GENERAL

Range

Display

Resolution

Accuracy

Range

Resolution

Accuracy

Output Impedance

Flatness

Frequency

Internal Modulation

FM

Harmonics

Sub-Harmonics

Spurious

Residual Modulation

Reverse Power Protection

Standard Accessories

AM

Memory

Power Requirements

Dimensions

Weight

THANK YOU

327, Gangnamdae-ro, Seoch-guCentury Business Center 201Seoul 137-751, KoreaPhone : (02) 553-4765Fax : (02) 553-4764E-mail : [email protected]

10585 Bloomfield StreetLos Alamitos Business CeterLos Alamitos, CA 90720, U.S.A.Phone : (562) 493-7959Fax : (562) 493-7984E-mail : [email protected]

test & measuring instrument catalogg_center/assets/… · 2018 new products volume 09. jan,...

Documents