tafe digital application form for certificate iii ... · tafe nsw – tafe digital uee30811...
Post on 01-Sep-2018
228 Views
Preview:
TRANSCRIPT
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 1 of 17
ELECTROTECHNOLOGY - CERT III ELECTRICIAN National code: UEE30811 Training package: UEE11
OFFICE USE ONLY
Date received:
Assessed by:
Approved: Notes:
Rejected:
Awaiting:
TAFE Digital Application Form
for Certificate III –
UEE30811 Electrotechnology
Electrician
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 2 of 17
Instructions • Your responsibility as an applicant is to provide sufficient evidence to TAFE Digital
Engineering Services that you are currently engaged in sufficient and appropriate full-time
work in the Electrotechnology industry.
• You are required to provide to TAFE Digital Engineering Services a statutory declaration
(included in this application) completed by your current employer with details of the
supervisor/s engaged in your training along with their contact details and electrical license
number/s.
• Your employer is responsible for providing you with what is known as ‘on the job’ training
in every unit of competency. If not, they will need to be able to provide an alternative and
explain to TAFE Digital Engineering Services how this will occur. This training should provide
you will ALL of the workplace evidence that you will need to record and collect throughout
the duration of your course. If a secondary employer is needed to get all the training their
details will need to be added in the areas provided.
• To obtain your Certificate of Proficiency, the total of all work experience must not be less
than the apprenticeship contract time. For non-apprentices, the work experience time is to
be not less than 4 years. Within this period of time, you will be expected to complete your
TAFE studies (normally this is completed in 3 years).
• Enclosed in this application are details of the workplace evidence required and specific
tasks that will be required for your employer to sign off on.
• All applications are assessed on merit.
• Please complete:
o 1. Applicant Details section
o 2. Employer Details section
o 3. Supervisor Details section
o 4. Table of workplace training
o 5. Statement of Training Declarations
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 3 of 17
• All parties should complete their details clearly and sign in the appropriate places. This
application form should be returned in ONE document plus scanned signatures by email to:
oten.engineering@tafensw.edu.au
• Evidence of competency as required in units (of competency) that has been achieved
through on-the-job training must be collected and recorded.
o COLLECTED: hard or soft copy – evidence must include a variety of different types
and may include but not be limited to photos, third-party reports, supervisor
reports, work records, etc. Competency must be clearly demonstrable. The ability
to judge the accuracy and honesty of evidence relies on a well-organised variety of
evidence.
o RECORDED: you must use an electronic system such as SkillsTracker or eProfiling to
record and track workplace evidence. A student submits a work record and their
supervisor confirms the legitimacy of the record and competency achieved
pertaining to the task. Any costs are borne by the student or their employer.
o The onus is on the employer representative to arrange and provide all necessary
workplace training.
o The onus is on each electrical supervisor to train to a competent level, supervise the
student in all necessary tasks, and report and approve training records.
o The onus is on the student to collect and record evidence of their competency
achieved through workplace training.
• If you have any questions, please direct them to TAFE Digital engineering
oten.engineering@tafensw.edu.au or 02 9715 8469.
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 4 of 17
How to complete this application
Read the instructions and general information carefully. Consider the requirements to do this course: full-time paid employment in an electrical trade; and able to gain all the necessary on-the-job training.
• Complete this form electronically using Adobe Reader.o The applicant completes section 1o The employer representative completes section 2o Each electrical supervisor completes section 3.o The employer representative and each electrical supervisor completes section 4o All parties complete section 5
• Print section 5. Statement of Training Declarations, sign, and scan.• Email the completed form, the scanned section declarations, and any other relevant
documents to: oten.engineering@tafensw.edu.au. Each document must be in MSWord or pdf format, not zipped, and of high quality. Do not send multiple image files.
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 5 of 17
General Information
The skills and knowledge required by a competent worker are described in terms of Competency Standard Units. For the electrical industry, these units are laid down in the National Electrotechnology Competency Standards.
To be assessed as ‘competent’ against National Electrotechnology Competency Standards, individuals need to demonstrate they have –
acquired specified essential knowledge and associated skills (EKAS)and
undertaken related workplace functions
The assessment of specified essential knowledge and associated skills is carried out during the off-the-job component of an individuals’ training, normally through the assessment of Essential Knowledge and Associated Skills Learning Specifications whilst undertaking the qualification at a College/Skill Centre.
Work experience records provide evidence that the applicant has, over a period of time, carried out relevant workplace activities (e.g. install …) including each element (plan, carry out, complete) across the range of equipment or procedures autonomously and to specified requirements, and on multiple occasions. That is, these records can be used to make judgments about the applicant’s on-the-job performance.
The purpose of this document is to provide a mechanism the employer can use to ensure that the apprentice/applicant has exposure to all of the experience required by the training package to be deemed competent.
This document will be attached to the apprentice/applicants’ training contract and the students’ progress will be monitored by the RTO on a six monthly basis.
• The employer should arrange for the student to have adequate study time to
enable them to complete their studies.
• The student must attend all skills assessment sessions required. These are
currently held quarterly at Mt Druitt College, Sydney.
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 6 of 17
1. Applicant DetailsPlease complete the details below.
Apprenticeship
I am an apprentice (Y / N): Number:
Start Date:
End Date: Notes:
Applicant Name:
Address:
Mobile:
Other Phone:
Email: Notes:
Previous Study
Have you started this course already?
(Y, give details / N):
Applying for Recognition of Prior Learning (Y / N):
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 7 of 17
Previous Study (continued)
Please provide a brief outline of your prior learning, where this was obtained, and the
evidence you have to support your claim. Supporting evidence such as transcripts
must be certified by a Justice of the Peace as true copies and attached as separate
documents.:
Details of workplace evidence collected (ie methods, units) and recorded
(ie SkillsTracker, eProfiling):
Notes – anything else we should know?:
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 8 of 17
2. Employer Details section A. Primary Employer Please complete the details below.
Company Name:
ABN:
Address:
Mailing Address:
Phone:
Other Phone:
Email:
Notes:
Employer Representative Name:
Role in Company:
Mobile:
Other Phone:
Email:
Notes:
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 9 of 17
B. Secondary Employer Please complete the details below.
Company Name:
ABN:
Address:
Mailing Address:
Phone:
Other Phone:
Email:
Notes:
Employer Representative Name:
Role in Company:
Mobile:
Other Phone:
Email:
Notes:
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 10 of 17
3. Supervisor Details Please list details of one or more electrical supervisors.
Primary Employer Electrical Supervisor 1
Name:
Electrical License Number & Issuing State:
Mobile:
Email:
Notes:
Company Name:
Address:
Phone:
Email:
Notes:
Primary Employer
Electrical Supervisor 2 Name:
Electrical License Number & Issuing State:
Mobile:
Email:
Notes:
Company Name:
Address:
Phone:
Email:
Notes:
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 11 of 17
Secondary Employer Electrical Supervisor 3
Name:
Electrical License Number & Issuing State:
Mobile:
Email:
Notes:
Company Name:
Address:
Phone:
Email:
Notes:
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 12 of 17
4. Table of Workplace Training 4.1. Primary Employer Tables A, B, C, D – Must be completed To be completed by the Primary employer representative and Electrical Supervisor 1. Please complete the table. You are stating that you as employer / electrical supervisor can provide the necessary training for each of the required units in the course.
On-the-job experience to be provided to the learner [Training Plan Workplace Evaluation - UEE30811] Please tick the boxes below to indicate the range of work you will provide for the learner.
B. Installation of appliances, switchgear and associated accessories for low voltage
electrical installations Compulsory Items
ALL of following are required. If you can’t provide the experience through your company, please leave the box blank.
Installing main switchboards (and custom switchboards), connecting main switches, protective devices and links on a main switchboard and preparing the switchboard for the installation of metering (must include both single and three phase switchboards). This must include all earthing and MEN system connections
Socket-outlets (1 and 3 phase) Lighting equipment and accessories Smoke and fire detectors
Additional Items All of these plus any 2 of these
Cooking appliances Water heaters and controls Transformers Three phase motor starter and
control switches Fixed electric heating system
(room heaters) Fixed electric cooling systems
(fans or A/C)
Appliances producing hot water or steam
Electric heating cables for floors and ceilings
Trace heating Duct heaters Batteries Capacitors Electricity
converters
A. Installation of low voltage wiring and accessories Wiring Systems
All of these Cable Types
Minimum of four (4) required Circuit Purpose
All of these Metallic conduit Non-metallic conduit Trunking Cable tray/ladder Underground
Plus one of below
Duct Catenary Posts/poles/struts
Thermoplastic insulated cable (TPI)
Flat thermoplastic sheathed (TPS)
Circular thermoplastic sheathed (TPS)
Steel wire armoured (SWA) Fire rated cable ( HT or HF or
MIMS) Flexible cables Aerial cable
Consumers mains (incl. 3 phase)
Submains Lighting Socket outlets (1 and 3
phase) Single phase fixed
appliance Plus one of below
Single phase motor Three phase motor Control Alternative supply
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 13 of 17
C. Troubleshoot and repair faults in low voltage electrical apparatus and circuits Equipment and associated circuits
All of these required Machines and associated control circuits
All of these required Switchboards Protective devices Lighting Heating Socket-outlets Control devices
Single phase motors and controls Three phase motors and controls Transformers and auxiliary components
Plus (desirable but not essential) Synchronous machines DC machines and controls
D. Verify compliance and functionality of low voltage general electrical installations ALL of the following are required Minimum of two (2) required
Visual inspection Earth continuity Insulation resistance Short circuit Polarity Circuit connections Fault loop impedance
Load current of appliance/apparatus Leakage current Appliance/apparatus calibration Appliance/apparatus performance
characteristics
Note: If you as the primary employer cannot supply all the experience required, you will need to arrange for secondment of your apprentice/trainee to another employer for the remaining elements. The secondary employer will need to complete Section 4.2
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 14 of 17
4.2 Secondary Employer
Tables A2, B2, C2, D2- to be completed if there are any requirements not met in tables A, B, C or D To be completed by Secondary Employer and Electrical Supervisor 3. Please complete the table. You are stating that you as electrical supervisor can provide the necessary additional training for each of the required units in the course not available at the primary employer.
On-the-job experience to be provided to the learner [Training Plan Workplace Evaluation - UEE30811] Please tick the boxes below to indicate the range of work you will provide for the learner.
B2. Installation of appliances, switchgear and associated accessories for low voltage electrical installations
Compulsory Items Not covered in Section 4.1
Installing main switchboards (and custom switchboards), connecting main switches, protective devices and links on a main switchboard and preparing the switchboard for the installation of metering (must include both single and three phase switchboards). This must include all earthing and MEN system connections
Socket-outlets (1 and 3 phase) Lighting equipment and accessories Smoke and fire detectors
Additional Items Not covered in Section 4.1
Cooking appliances Water heaters and controls Transformers Three phase motor starter and
control switches Fixed electric heating system
(room heaters) Fixed electric cooling systems
(fans or A/C)
Appliances producing hot water or steam
Electric heating cables for floors and ceilings
Trace heating Duct heaters Batteries Capacitors Electricity
converters
A2. Installation of low voltage wiring and accessories Wiring Systems
Not covered in Section 4.1 Cable Types
Not covered in Section 4.1 Circuit Purpose
Not covered in Section 4.1 Metallic conduit Non-metallic conduit Trunking Cable tray/ladder Underground
Plus one of below
Duct Catenary Posts/poles/struts
Thermoplastic insulated cable (TPI)
Flat thermoplastic sheathed (TPS)
Circular thermoplastic sheathed (TPS)
Steel wire armoured (SWA) Fire rated cable ( HT or HF or
MIMS) Flexible cables Aerial cable
Consumers mains (incl. 3 phase)
Submains Lighting Socket outlets (1 and 3
phase) Single phase fixed
appliance Plus one of below
Single phase motor Three phase motor Control Alternative supply
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 15 of 17
C2. Troubleshoot and repair faults in low voltage electrical apparatus and circuits Equipment and associated circuits
Not covered in Section 4.1 Machines and associated control circuits
Not covered in Section 4.1 Switchboards Protective devices Lighting Heating Socket-outlets Control devices
Single phase motors and controls Three phase motors and controls Transformers and auxiliary components
Plus (desirable but not essential) Synchronous machines DC machines and controls
D2. Verify compliance and functionality of low voltage general electrical installations ALL of the following are required Minimum of two (2) required
Visual inspection Earth continuity Insulation resistance Short circuit Polarity Circuit connections Fault loop impedance
Load current of appliance/apparatus Leakage current Appliance/apparatus calibration Appliance/apparatus performance
characteristics
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 16 of 17
List of Units of Competency CORE
Unit ID Code Unit Work Description (not unit title)
UEENEEC020B Gather, record and monitor work place evidence
UEENEEE101A Apply safe work practices and participate in risk control measures
UEENEEE102A Safe use of hand & power tools. Basic fabrication using metals and plastics.
UEENEEE104A Design, install and fault find basic circuits. Selection & use of basic meters.
UEENEEE105A Work at heights. Drill & fix into timber, steel and concrete
UEENEEE107A Interpret industry related drawings and specifications
UEENEEE137A Identify, assess, document, control and review WHS hazards in the workplace
UEENEEG006A Design parameters connection and fault determination of single and three phase machines.
UEENEEG033A Installation of cable support systems. Installation, preparation, termination, housing & testing of special use cables. (eg MIMS, SWA etc)
UEENEEG063A Correct arrangement of electrical installations and protective devices
UEENEEG101A Design, connect and control magnetic devices and machines.
UEENEEG102A Design, install and fault find single and three phase a.c circuits. Selection & use of test devices.
UEENEEG103A Correct arrangement of electrical wiring and accessories
UEENEEG104A Design, install and fault find heating, lighting and accessories. Switchboard installation, wiring and earthing
UEENEEG105A Test and verification of cabling systems and appliances
UEENEEG106A Correct installation and termination practices of cords & cables operating at voltages between 50V and 1000Va.c
UEENEEG107A Correct selection of electrical installations and protective devices
UEENEEG108A Troubleshoot and fault determination of single and three phase circuits and apparatus.
UEENEEG109A Connect, test and control single and three phase appliances and machines.
UEENEEK142A Identify, assess, document, control and review environmental & sustainable hazards in the workplace
ELECTIVE
UEENEEC001B Record keeping
UEENEED101A Using a computer effectively
UEENEEH102A Repairing and replacing components using soldering
UEENEEI150A Develop, enter and verify programs for Programmable Logic Controllers
TAFE NSW – TAFE Digital UEE30811 Certificate III Application Form Created: 16/02/2018, Modified: 16/02/2018 Version: 3.0 Page 17 of 17
……………………………………………………..…… …………..……....…..…………………………… ………….……...….........… (Electrical Supervisor 1 – Please PRINT NAME) (Signature) (Date)
……………………………………………………..…… …………..……....…..…………………………… ………….……...….........… (Electrical Supervisor 2 – Please PRINT NAME) (Signature) (Date)
……………………………………………………..…… …………..……....…..…………………………… ………….……...….........… (Applicant – Please PRINT NAME) (Signature) (Date)
5. Statement of Training Declarations
This is to state that the information recorded here is a true and accurate record of the training that will be available to the applicant. I will advise TAFE Digital engineering services in writing within one month of employment or supervision changes that affect the applicants’ training.
Primary Employer
Secondary Employer
……………………………………………………..…… …………..……....…..…………………………… ………….……...….........… (Electrical Supervisor 3) – Please PRINT NAME) (Signature) (Date)
Applicant
……………………………………………………..…… …………..……....…..…………………………… ………….……...….........… (Employer representative – Please PRINT NAME) (Signature) (Date)
……………………………………………………..…… …………..……....…..…………………………… ………….……...….........… (Employer representative – Please PRINT NAME) (Signature) (Date)
top related