street lighting standards update - cityofwhitefish.org lighting...9.1.5 bollard – share use paths...
Post on 09-Jul-2018
225 Views
Preview:
TRANSCRIPT
Section 9‐1
SECTION 9 DECORATIVE STREET LIGHTING STANDARDS
9.1 Street Lighting
Decorative street lighting is required on all public and private streets, public and private parking lots and along all shared use paths. Any variation from this requirement must have approval of the Public Works Director. Street lights shall be installed concurrently with underground utilities. Street lighting will be decorative in character, unless otherwise approved by the City Council. All decorative street lights must be compliant with the City's Outdoor Lighting Standards (Section 11-3-25 of the Whitefish City Code). Applicable lighting standard details 47a thru 47m must be included with lighting plans. Lighting plans shall include features such as, but not limited to, service assembly, photo control, layout of poles, conduits and pull boxes, conduit and wire sizes, fuses, etc.
9.1.1 Residential – Streets, Parking Lots & Shared Use Paths
Use the following, or approved equal, street light poles and luminaries on residential streets, parking lots and shared use paths: Vendor: Mountain States Lighting (MSL) Luminaire: HADCO #C2316-50-HPS-J-240V Lamp: 50 Watt High Pressure Sodium (HPS) Pole: MSL #14EFA-5-TT/3x3-16.5WF(Name)-LEG-J(Green) Base: MSL #WF-16.5” Wx48” H-500-HDEB-J(Green) Break Away: See SD-47h Height: 17’-8” = Pole 14’-0” + Luminaire 3’-8” Pole Foundation: 18” Sonotube, 3’-8” Deep (See SD-47f) Qty. 4 - ¾” x 18” Ell Bolts 10” (+) Pattern, 3-½” Bolt Projection Isometric Footprint: See Cut Sheets for Isometric Footprint Exhibit Standard Drawing: See SD-47a
9.1.2 Commercial – Downtown Streets & Parking Lots
Use the following, or approved equal, street light poles and luminaries on downtown streets and commercial parking lots: Vendor: Mountain States Lighting (MSL) Luminaire: HADCO #C2316-100-HPS-J-240V Lamp: 100 Watt High Pressure Sodium (HPS) Single Arm Pole: MSL #22TFS-SA/17’/2’x2.375”/SCR-22” MAD(Madison)-C2316AF1XT-(1) BA-J(Green) Double Arm Pole: MSL #22TFS-DBLSA/17’/2’x2.375”/SCR-22” MAD(Madison)-C2316AF1XT-(2) BA-J(Green) Base: MSL#MAD(Madison)-22”Wx38”H-HDEB-J(Green) Break Away: None
Section 9‐2
Height: Pole 22’-0” Luminaire Height: 3’-8” Mounted on Arm at 17’-0” Pole Foundation: 28” Sonotube, 5’-0” Deep Qty. 4 - 1” x 36” Ell Bolts 12” (+) Pattern, 3-½” Bolt Projection Plant Hanger: Qty. 1 at 15’-0” Irrigation Ready: Yes Isometric Footprint: Contact Mountain States Lighting Standard Drawing: See SD-47b
9.1.3 Commercial – MDT (HWY 93) Downtown
Use the following, or approved equal, street light poles and luminaries on MDT (HWY 93) downtown streets: Vendor: Mountain States Lighting (MSL) Luminaire: HADCO #C2316-100-HPS-J-240V, or HADCO #C2316-150-HPS-J-240V Lamp: 100 Watt High Pressure Sodium (HPS), or 150 Watt High Pressure Sodium (HPS), Single Arm Pole: MSL #25TFS-SA/17’/2’x2.375”/SCR-22” Base: MSL#MAD(Madison)-23.5”Wx44”H-HDEB-HADCO-
J(Green) Break Away: None Height: Pole 25’-0” Luminaire Height: 3’-8” Mounted on Arm at 17’-0” Pole Foundation: 48” Diameter, 15’-0” Deep Qty. 4 - 1” x 36” Ell Bolts 12” (+) Pattern, 3-½” Bolt Projection Plant Hanger: Qty. 1 at 13’-0” Irrigation Ready: Yes Isometric Footprint: Contact Mountain States Lighting Standard Drawing: See SD-47c
9.1.4 Commercial – MDT (HWY 93) West District
Use the following, or approved equal, street light poles and luminaries on MDT (HWY 93) West District streets: Vendor: Mountain States Lighting (MSL) Luminaire: HADCO #C0855E-250-HPS-J-(Green) Lamp: 250 Watt High Pressure Sodium (HPS) Single Arm Pole: MSL #_(Call for Model Number) Base: MSL#MAD(Madison)-23.5”Wx44”H-HDEB-HADCO-
J(Green) Break Away: None
Section 9‐3
Height: Pole 25’-0” Luminaire Height: 3’-8” Mounted on Arm at 25’-0” Pole Foundation: 24” Sonotube, 7’-6” Deep Qty. 4 - 1” x 36” Ell Bolts 12” (+) Pattern, 3-½” Bolt Projection Plant Hanger: Qty. 2 at Bottom and Top Flag Holder: Qty. 1 Irrigation Ready: Yes Isometric Footprint: Contact Mountain States Lighting Standard Drawing: See SD-47d
9.1.5 Bollard – Share Use Paths
As an alternate to 9.1.1, the following, or approved equal, bollard lights may be used on share use paths:
Vendor: Cyclone Lighting Fixture Types: Army Helmet Hood (two options)
Option One: #CBM1154C-LAP-3-25W-4K-240-BB3-NONE-DK-GRN-TX
Option Two: #CBM1105C-LAP-3-25W-4K-240-BB3-NONE-DK-GRN-TX
Luminaire: LAP, Pond Acrylic, 75% Diffusing Optic: LED Type 3, Full Cut-Off Standards, Dark Sky Friendly Foundation: 18” Sonotube, 3’-8” Deep (See SD-47f) Qty. 4 - ¾” x 18” Ell Bolts 3-½” (+) Pattern, 3-½” Bolt Projection Base Skirt: Hagerstown Decorative Base Skirt Source: 240 Volt, 4K High Power LED, 4000K Finish: Dark Green Textured Powder Coat Isometric Footprint: Contact Cyclone Lighting Standard Drawing: See SD-47e
9.2 Pull Boxes
Pull boxes shall be installed flush with finished grade. To promote drainage and stability, all pull boxes shall receive a 6-inch deep foundation section of clean 3/8” minus aggregate chips extending 3-inches past the base of the box (See SD-47i). Pull boxes shall be placed at all locations where conduit layouts would result in 45-degree angles, except for street light base and service assembly pad sweeps. Pull boxes shall be installed at the ends of all conduit runs.
Use the following, or approved equal, pull boxes:
- Brooks 38PB (superimposed, bolt down, 3/8” diamond plate steel cover) - Old Castle 1324-12(Model #13244180, steel cover)
Section 9‐4
9.3 Conduits, Wiring and Fuses
All conduits shall be Schedule 40 PVC. Minimum conduit size is 1 ¼”. Minimum conduit bury depth is 1’-8”. Conduit runs from power source to service assembly shall be 3” (See SD-47m). All conduit work shall be inspected by a licensed electrician prior to burial. When present, conduits shall be placed 6” behind curbs (See SD-47j). Conduits shall be sealed from dirt, debris and rodents (dux seal, perma seal, etc.) when entering and existing light bases and pull boxes. Pull box splices shall be made watertight.
Wire & Conduit Sizing & Specifications
Notes:
1) Keep linear footage of 1 ¼” conduit to 2,000’ maximum with #8 & #6 wire sizes. (measuring along main conduit run)
2) For conduit runs over 2,000’, use 2” conduit. 3) For conduit runs with #4 wire size, use 2” conduit. 4) For conduit runs with more than 1 circuit, use 2” conduit.
5) Simple wire size formula, CM(wire size) = 1.3 x L(linear footage) x F (number of fixtures)
6) Copper Wire
Size
#8 16,510 CM Maximum Circular Mills #6 26,240 CM
#4 41,740 CM 7) Sizing Chart Fixture Qnty. Max. Linear Footage Min. Wire Size Min Conduit Size 1 2,000 #8 1 ¼” 2 2,000 #8 1 ¼” 3 2,000 #8 1 ¼” 4 2,000 #8 1 ¼” 5 2,000 #8 1 ¼” 6 1,500 #8 1 ¼” 7 1,000 #6 1 ¼” 7 1,500 #6 1 ¼” 8 1,500 #6 1 ¼” 8 2,000 #6 1 ¼” 9 1,500 #6 1 ¼” 9 2,000 #6 1 ¼” 10 1,500 #6 1 ¼” 10 2,000 #6 1 ¼” 11 1,500 #6 1 ¼” 11 2,000 #6 1 ¼” 12 1,500 #6 1 ¼” 12 2,000 #4 2” 12 2,500 #4 2”
8) Wire installed in conduit runs shall not be smaller than #8 THHN copper stranded conductor.
9) Wire installed in poles from base to luminaire shall be #10 THHN copper stranded conductor.
10) Notes 1 thru 9 are minimum standards. (larger size wire and conduits are always acceptable).
11) 12 fixtures maximum per circuit.
Section 9‐5
Each luminaire shall have two (2) watertight break away fuse holders with dual element midget fuses.
Fusing Specifications The following are acceptable fuse holders and fuses for decorative street lights. Equals
accepted on approval only.
In Line Break Away Weatherproof Fuse Holders No. Manufacturer Single Pole Terminal Two Pole
1FH Homac SLK – M SLK -6 SLK - 2
Screw Crimp Crimp
SLT – M SLT – 6 SLT - 2
2FH Bussmann (Copper)
HEB – JW- RLC – J HEB – JW – RYC HEB – AW – RLC – J HEB – AW – RYC
Screw Screw Crimp Crimp
HEY – JW- RLC – J HEY – JW – RYC HEY – AW – RLC – J HEY – AW – RYC
3FH Ferraz -
Shawmut FEB – 81 – 81 – BA FEB – 11 – 11 - BA
Screw Screw
FEX – 91 – 91 – BA FEX – 11 – 11 - BA
4FH SEC
Connector Company
SEC 1791 - SF Screw SEC 1791 - SDF
Midget Fuse, 1-1/2” x 13/32”, Dual Element No. Manufacturer Fuse
1F Bussmann FNM – 3 / 5
2F Ferraz - Shawmut TRM – 3 / 5
3F Little Fuse FLM – 3 / 5
9.4 Pole Spacing, Offset & Installation
Poles shall be installed plumb and level. Anchor bolts and nuts shall be corrosion resistant and installed with an anti-seize compound on threads. Decorative lights shall be spaced 150 to 180 feet along residential streets. The light location should alternate from side to side of street. Lights shall be placed a minimum of 3 feet from back of curb.
9.5 Service Assemblies
Service assemblies shall be 100 Amp, 120/240 Volt, 1 Phase. Service assemblies shall be bolted to a mounting base (Milbank CP-16DMNT-CALT, or approved equal) that is bolted
Section 9‐6
bolt anchors fixed in a reinforced concrete pad (See SD-47l). Anchor bolts and nuts shall be corrosion resistant and installed with an anti-seize compound on threads. Use the following, or approved equal, service assembly commercial pedestals:
- Milbank CP3B11115A22 Commercial Pedestal - Cooper “B Line” Commercial Pedestal
All service assemblies shall be controlled by a photo control (See SD-47k). Photo control device shall be Tork #2107, or approved equal.
9.6 Inspections
Call for electrical conduit rough-in inspection before covering conduits. Call for electrical final inspection and compete working test before project sign-off. Project will not be complete until work test is finalized.
Inspection Contact Number: 406-253-6183 or 406-863-2460
9.7 Product Sheets & Isometric Footprint Exhibit
Product sheets for preapproved products can be obtained by contacting the Public Works Department (406-863-2460). Included are pull boxes, commercial pedestals, mounting base and photo control product sheets. Type 3 Residential Street Light Isometric Footprint Exhibit can also be provided by the Public Work Department upon request.
Section 9‐7
SECTION 9
STANDARD DRAWINGS
SD-47a Residential Street Light SD-47b Commercial Street Light SD-47c MDT Downtown Street Light SD-47d MDT West District Street Light SD-47e Bollard Shared Use Path Light SD-47f Residential Pole and Bollard Foundation SD-47g Commercial Pole Foundation SD-47h Break Away Attachment SD-47i Pull Box Installation SD-47j Typical Street Lighting Conduit SD-47k Street Light Electrical Service and Wiring Diagram SD-47l Street Light Electrical Service Base SD-47m Utility Power Service Conduit Riser
LUMINAIRE DETAIL
BASE DETAIL
NOTES:
LUMINAIRE DETAIL
BASE DETAIL
SINGLE FIXTURE DECORATIVE LUMINAIRE POLE, DBL PLANT HANGER ARM, IRRIGATION HOLE
DECORATIVE LUMINAIRE POLE FOUNDATION
AA
NOTES:
SECTION A-A
NOTES:
ANCHOR BOLT TEMPLATE
ST
RE
ET
SID
EW
AL
K
ANCHOR BOLT TEMPLATE
NOTES:
ANCHOR BOLT TEMPLATE
ST
RE
ET
SID
EW
AL
K
NOTES:
100
100
15
20
20
L1 L2
CR
H
O
A
N
N
WIRE DIAGRAM
STREET LIGHT ELECTRICAL SERVICE
LINE SIDE (F.E.C.)
LOAD SIDE (CITY)
STREET SIDE
NOTES:
NOTES:
19Customer Service Department at 800-735-5566 All Plastic and
H-Series Productswww.oldcastleprecast.com/enclosuresolutions
1324RA
TING
Part# Description 1 Description 2 Color Depth Item Weight Pallet Qty List Price Line Item Discount
DesignLoad
T22
T22
2215
T15
Extension - 1324
13242600 Body, PC1324-18,FW PC132418FW Gray 18 71 15 $131.94 OC03 1500013242020 Body, PC1324-12,SW PC132412SW Gray 12 50 20 $113.01 OC03 2250013242023 Body, PC1324-18,SW PC132418SW Gray 18 52 15 $130.38 OC03 2250013242038 Body, PC1324-24,SW PC132424SW Gray 24 89 10 $179.12 OC03 22500
13243001 Ext, PC 1324-9 PC13249X Gray 9 50 16 $157.07 OC03 22500
13241600 Unit, PC1324-12, T15 - Blank PC132412-T15 Gray 12 90 20 $248.09 OC03 1500013241603 Unit, PC1324-12, T15 -"Electric" PC132412-T15 Gray 12 90 20 $248.09 OC03 1500013241605 Unit, PC1324-12, T15 -"Street Lighting" PC132412-T15 Gray 12 90 20 $248.09 OC03 1500013241606 Unit, PC1324-12, T15 -"Tra c Signal" PC132412-T15 Gray 12 90 20 $248.09 OC03 1500013241610 Unit, PC1324-18, T15 - Blank PC132418-T15 Gray 18 109 15 $265.25 OC03 1500013241611 Unit, PC1324-18, T15 - Blank, FW PC132418-T15 Gray 18 116 15 $265.25 OC03 1500013241616 Unit, PC1324-18, T15 -"Electric" PC132418-T15 Gray 18 109 15 $265.25 OC03 1500013241617 Unit, PC1324-18, T15 -"Electric", FW PC132418-T15 Gray 18 116 15 $265.25 OC03 1500013241620 Unit, PC1324-18, T15 -"Street Lighting" PC132418-T15 Gray 18 109 15 $265.25 OC03 1500013241621 Unit, PC1324-18, T15 -"Street Lighting", FW PC132418-T15 Gray 18 116 15 $265.25 OC03 1500013241622 Unit, PC1324-18, T15 -"Tra c Signal" PC132418-T15 Gray 18 109 15 $265.25 OC03 1500013241623 Unit, PC1324-18, T15 -"Tra c Signal", FW PC132418-T15 Gray 18 116 15 $265.25 OC03 1500013241635 Unit, PC1324-24, T15 - Blank PC132424-T15 Gray 24 127 10 $313.42 OC03 1500013241638 Unit, PC1324-24, T15 -"Electric" PC132424-T15 Gray 24 127 10 $313.42 OC03 1500013241640 Unit, PC1324-24, T15 -"Street Lighting" PC132424-T15 Gray 24 127 10 $313.42 OC03 1500013241641 Unit, PC1324-24, T15 -"Tra c Signal" PC132424-T15 Gray 24 127 10 $313.42 OC03 1500013241021 Unit, PC1324-12, T22 - "Electric" PC132412-T22 Gray 12 99 20 $292.57 OC03 2250013241023 Unit, PC1324-12, T22 - Blank PC132412-T22 Gray 12 99 20 $292.57 OC03 2250013241124 Unit, PC1324-12, T22 - "Tra c Signal" PC132412-T22 Gray 12 99 20 $292.57 OC03 2250013241265 Unit, PC1324-12, T22 - "Street Lighting" PC132412-T22 Gray 12 99 20 $292.57 OC03 2250013241027 Unit, PC1324-18, T22 - "Electric" PC132418-T22 Gray 18 118 15 $309.73 OC03 2250013241029 Unit, PC1324-18, T22 - Blank PC132418-T22 Gray 18 118 15 $309.73 OC03 2250013241630 Unit, PC1324-18, T22 - "Street Lighting" PC132418-T22 Gray 18 118 15 $309.73 OC03 2250013241632 Unit, PC1324-18, T22 - "Tra c Signal" PC132418-T22 Gray 18 118 15 $309.73 OC03 2250013241164 Unit, PC1324-24, T22 - Blank PC132424-T22 Gray 24 140 10 $357.90 OC03 2250013241262 Unit, PC1324-24, T22 - "Electric" PC132424-T22 Gray 24 140 10 $357.90 OC03 2250013241271 Unit, PC1324-24, T22 - "Street Lighting" PC132424-T22 Gray 24 140 10 $357.90 OC03 2250013241644 Unit, PC1324-24, T22 - "Tra c Signal" PC132424-T22 Gray 24 140 10 $357.90 OC03 22500
T22
T15
13244603 Lid, PC1324-T, T15 - Blank PC1324T-T15 Gray - 38 30 $119.90 OC03 1500013244607 Lid, PC1324-T, T15 -"Electric" PC1324T-T15 Gray - 38 30 $119.90 OC03 1500013244609 Lid, PC1324-T, T15 -"Ground" PC1324T-T15 Gray - 38 30 $119.90 OC03 1500013244610 Lid, PC1324-T, T15 -"Street Lighting" PC1324T-T15 Gray - 38 30 $119.90 OC03 1500013244612 Lid, PC1324-T, T15 -"Tra c Signal" PC1324T-T15 Gray - 38 30 $119.90 OC03 1500013244012 Lid, PC1324-T, T22 - "Electric" PC1324T-T22 Gray - 51 30 $163.84 OC03 2250013244014 Lid, PC1324-T , T22 - Blank PC1324T-T22 Gray - 51 30 $163.84 OC03 2250013244173 Lid, PC1324-T, T22 - "Tra c Signal" PC1324T-T22 Gray - 51 30 $163.84 OC03 2250013244178 Lid, PC1324-T, T22 - "Street Lighting" PC1324T-T22 Gray - 51 30 $163.84 OC03 2250013244613 Lid, PC1324-T, T22 - "Ground" PC1324T-T22 Gray - 51 30 $163.84 OC03 22500
Unit - 1324 (Units come standard with Body-Open Bottom, Lid and SS Hex Bolt Floating Nut Hardware)
Lid - 1324
Body - 1324
H-SER
IES
Tier 15*
H-Series - 1324 Rectangular & Flared Wall (FW)Polymer Concrete
Straight Wall
Flared Wall
Medium DutyNon-deliberate Traffic
Medium DutyNon-deliberate Traffic
Heavy DutyNon-deliberate Traffic
Tier 15 & 22*
*P roduc ts a re ra ted by the lowest component rating. A tier 15 cover with a tier 22 body is rated tier 15. A tier 22 cover with a tier 22 body is rated tier 22.
See Accesso r ies Sec t i on in the Back of th is Manual for Opt ions, Hardware, Special ty Markings and Other Accessories
41Customer Service Department at 800-735-5566 All Plastic and
H-Series Productswww.oldcastleprecast.com/enclosuresolutions
AC
CESSO
RIES
80002006 1x HBlt+ Wsh+ Rcfnt+ Clip 3/8"x2.5SSTCapt1220/1419 XX-50 1015, 1220, 1419 $5.02 OC09 -80002008 1x HBlt+Wsh+ Rcfnt+Spring 3/8"-16 x 2.5 Capt 0910 Only 0910 $5.35 OC09 -80002025 2x Hexbolt + 2x Wash SST 3/8" 16 x 2" 1324, 1730 $10.31 OC09 -80002007 1x LgPnta+ Wsh+ Rcfnt+Clip 3/8" x 2.5 SST Cap 1220/1419 1015, 1220, 1419 $9.06 OC09 -
MS02200 Hook Wrench, Penta Hook Wrench - $158.61 OC09 -3005065 Hook, Universal Lifting, 36" Hook - $56.38 OC09 -
80002005 Hex Bolt + Washer SST Hex 3/8" 16 x 2-1/2" 1324, 1730 $3.68 OC09 -80002025 2x Hexbolt + 2x Wash SST Hex 3/8" 16 x 2" 1324, 1730 $10.31 OC09 -80002052 2x Hexbolt + 2x Washer SST Hex 1/2" 13 x 1-1/4" 1118, 1212 $3.92 OC09 -80002033 2x Hexbolt + 2x Washer SST Hex 1/2" 13 x 2-1/2" 1118, 1324, 1730 $8.63 OC08 -80002029 2x Hexbolt + 2x Washer SST Hex 1/2" 13 x 3-1/2" 2436, 3048, 3060 $17.63 OC09 -80002026 2x LgPnta + 2x Washer SST Penta 3/8" 16 x 2" 1324, 1730 $15.73 OC09 -80002054 2x LgPnta + 2x Washer SST Penta 1/2" 13 x 1-1/4" 1118, 1212 $6.78 OC09 -80002034 2x LgPnta + 2x Washer SST Penta 1/2" 13 x 2-1/2" 1118, 1324, 1730 $10.41 OC09 -80002030 2x LgPnta + 2x Washer SST Penta 1/2" 13 x 3-1/2" 2436, 3048, 3060 $21.71 OC09 -
- Dividers - - Call Cust. Service - -
80002052 2x Hexbolt + 2x Washer SST Hex 1/2" 13 x 1-1/4" 1212 $3.92 OC09 -80002033 2x Hexbolt + 2x Washer SST Hex 1/2" 13 x 2-1/2" 1118, 1324, 1730 $8.63 OC08 -80002029 2x Hexbolt + 2x Washer SST Hex 1/2" 13 x 3-1/2" 2436, 3048, 3636 $17.63 OC09 -80002054 2x LgPnta + 2x Washer SST Penta 1/2" 13 x 1-1/4" 1212 $6.78 OC09 -80002034 2x LgPnta + 2x Washer SST Penta 1/2" 13 x 2-1/2" 1118, 1324, 1730 $10.41 OC09 -80002030 2x LgPnta + 2x Washer SST Penta 1/2" 13 x 3-1/2" 2436, 3048, 3660 $21.71 OC09 -
34358265 Terminators-3" - - $3.68 OC10 -34358270 Terminators-4" - - $5.11 OC10 -34358280 Terminators-5" - - $9.63 OC10 -34358290 Terminators-6" - - $14.99 OC10 -34358160 Trench, Pulling Eye/B. Oeil 3/8-16SS - - $35.60 OC10 -34358170 Trench, J Hook/Crochet en J, Zinc - - $3.87 OC10 -34358256 Hook cov. HB/Crochet couv. BH - - $32.26 OC10 -34358260 Terminators-2" - - $3.36 OC10 -34358450 Cable Rack Hook 7-1/2" #10A36 - - $9.01 OC10 -- Dividers - - Call Cust Service - -
Hardware & Accessories
Carson Hardware
Enclosure Tools
H-Series Hardware
H-Series Accessories
Synertech Hardware
Synertech Accessories
RATIN
G
Part# Description 1 Description 2 For Use With: ListPrice
Line Item Discount
DesignLoad
31900100 Sealant, Surebond SB-12 10.2oz Cartridge 10 Lid Coverage - - - - $14.73 OC09 -
31901000 Marking Plate-Blank 4"x8" - - - - $7.86 OC10 -31901010 Marking Plate-Electric 4"x8" - - - - $7.86 OC10 -31901030 Marking Plate-Traf c Signal 4"x8" - - - - $7.86 OC10 -31901040 Marking Plate-Street Lighting 4"x8" - - - - $7.86 OC10 -31901050 Marking Plate-High Voltage 4"x8" - - - - $7.86 OC10 -31901070 Marking Plate-Lighting 4"x8" - - - - $7.86 OC10 -31901090 Marking Plate-Special 4"x8" - - - - $7.86 OC10 -
H-Series & Synertech Marking Plates
Marking Plate
Marking Plate Adhesive
RATIN
G
Part# Description 1 Description 2 Color/Item Depth Item
WeightPalletQty
ListPrice
Line Item Discount
DesignLoad
11184054 1118 Steel T Cover Gal Blank PC Box 1118 $163.14 OC01 -13244180 1324 Steel T Cover Gal Blank PC Box 1324 $385.38 OC01 -17304186 1730 Steel T Cover Gal Blank PC Box 1730 $388.00 OC01 -24364011 2436 Steel T Cover Gal Blank PC Box 2436 $677.69 OC01 -30484019 3048 Steel T Cover Gal Blank PC Box 3048 $790.00 OC01 -30604013 3060 Steel T Cover Blank 2 Piece Over | Under 3060 $902.20 OC01 -
H-Series Steel Lids
Steel Lids
RATIN
G
Part# Description 1 Description 2 For Use With: ListPrice
Line Item Discount
DesignLoad
For solid bottom, dividers, and other H-Series options contact customer service.
Milbank Manufacturing | 4801 Deramus Ave., Kansas City, MO 64120 | 877.483.5314 | milbankworks.com
7
Utility requirements for this equipment may vary. Always consult the serving utility for their requirements prior to ordering or installing this equipment. This product must be installed by a licensed electrician. Installation of this equipment may require local electrical inspector approval.
COMMERCIAL
PEDESTALS
Commercial PedestalsCP3B “ML” Main Load Center Series
The Milbank Main Load Center Commercial Pedestals are designed to handle the vast majority of all requirements in a standard, stocked configuration.
• No waiting or extra charge• Units feature a load center with a plug-on, back-fed main
breaker• Load center has 16 positions for the 100 amp pedestals and
24 circuits for the 200 amp pedestals• Both sizes include sub-feed lugs to allow feeding an external
panel If your application requires turning loads on based on “dusk-to-dawn” requirements, be sure to see the Milbank Switched Load Center Commercial Pedestal products on the next page.
*Note: Chart shows standard, stocked items. Other options and features are available. Contact factory for options details and availability.
Stocked Pedestals*Optional Fifth Terminal Kit
Main CB Load Center Circuits
Meter Socket TypeAmps Spaces
CP3B11115A22 105J 100 1,2 16 Ring type with test / bypass blocksCP3B12119A22 105J 200 1,2,3 4 24 Ring type with test / bypass blocksCP3B51115A22 K3865 100 1,2 16 Ringless socket with lever bypassCP3B52119A22 K3865 200 1,2,3,4 24 Ringless socket with lever bypass
Typical Applications
Remote site service for multiple loads.
Features
These units include everything required for remote site service:• Type 3R construction• Expandable: load centers allow for future expansion without
costly modifications• All units feature 200 amp meter socket with optional field-
installable fifth terminal kit available• Optional mounting base can be embedded in concrete for
fast, easy installation• Separate sealable and lockable utility termination section• Separate sealable and lockable metering section with the
option of either a ring-type socket with test/bypass blocks (conforms to EUSERC 308) or a heavy duty ringless socket with lever bypass
• A separate sealable and lockable customer section with a load center for “always on” loads that includes:
• Main circuit breaker• 20 (200 or 125 amp models) or 14 (100 amp models)
blank breaker spaces• A circuit directory to document configuration
CP3B11115A22(see drawing on pg. 17)
Com
mercial
Meter Pedestals
Data subject to change without notice. Consult local utility for area acceptance. All dimensions are in inches.
Commercial Meter Pedestals - Pad Mounted
Meter Mounting Equipment111
Utility Meter & Test
Block Section
Front Side Back
Customer
Distribution Section
(Padlock Provision) Utility
Termination Section
(Padlock & Sealing
Provisions)
Catalog Amp Jaws Service Bypass Voltage Distribution Type Mounting DimensionsNumber Rating Type Main Breaker Branches Pad Width Depth Height
CMP4111MC-1 100 4 1Ø,3W TB 240 100A,2P 12 Plug-In MB1515 15” 171/2” 54”CMP4111MCH-1 100 4 1Ø,3W TB 480 100A,2P 14 Bolt-On MB2015 20” 171/2” 54”CMP4121MC-1 200 4 1Ø,3W TB 240 200A,2P 12 Plug-In MB2015 20” 171/2” 54”CMP4121MCH-1 200 4 1Ø,3W TB 480 200A,2P 18 Bolt-On MB1515 15” 171/2” 54”CMP4411MC-1 100 7 3Ø,4W TB 240 100A,3P 12 Plug-In MB1515 15” 171/2” 54”CMP4411MCH-1 100 7 3Ø,4W TB 480 100A,3P 12 Bolt-On MB2015 20” 171/2” 54”CMP4421MC-1 200 7 3Ø,4W TB 240 200A,3P 12 Plug-In MB1515 15” 171/2” 54”CMP4421MCH-1 200 7 3Ø,4W TB 480 200A,3P 18 Bolt-On MB2015 20” 171/2” 54”
Application• Utility meter, main disconnect and distribution panel• Receive ANSI C12.10 watthour meters
Construction• Ring type• NEMA Type 3R• ANSI 61 gray E-coat finish• Separate sealable utility termination and meter compartments• Padlockable disconnect and distribution section• Underground feed
Standards• UL Listed• ANSI C12.7• EUSERC #308
Accessories• 5th jaw kit - 50365 (single phase)• Filler plate kit - 25139• Class T fusible pullouts• Controls, see page 109
CMP4111MC-1
Utility requirements may vary. Always consult the serving utility for their requirements prior to ordering or installing this equipment. This product must always be installed by a licensed electrician. Installation of this equipment may require local electrical inspector approval.
milbankworks.com
CP-16PDMNT-CALTCOM MTR PED ACCESSORIES784572164857
CCatalog Number:IItem Description:UUPC Code:
TORK
PH
OTO
CO
NTR
OLS
435
FEATURES
APPLICATIONS
SPECIFICATIONS
2100 SERIESSPECIFICATION GRADE1/2" CONDUIT MOUNTINGDIE CAST ZINCPHOTOCONTROL
Parking lot lightingBuilding perimeter lightingOutdoor signage
CAT.NO.
UPCCODE
VOLTAGE(VAC) 50-60Hz
RATINGLED
TUNGSTEN BALLAST
2101 60012 120 2000W 1800VA 600VA*
2104 60013 208-277 2000W 1800VA 600VA*
2107 60031 120/277 2000W 1800VA 600VA*
73866 62020 Mounting Bracket - - -
SENSOR: Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants. Photocell responds to the light spectrum near to that of a human eye.
OPERATION: Delay of up to two minutes to prevent false switching due to light from passing vehicles, lightning, etc.
STANDARDS: Meets ANSI/UL773A.
HOUSING: Heavy Duty die cast zinc housing and base. Gasketed for maximum weather protection.
ENERGY SAVINGS: Works with screw base CFLs.
ON/OFF: Turn ON is 1 to 5fc, Turn OFF is 3 to 15fc, without the slide in position. ON/OFF adjustment is easily made by moving a slide cover. No tools required.
TIME DELAY: ON and OFF.
CELL: Cadmium sulphide, epoxy conformal coated 1" diameter.
CONTACTS: Remain closed between dusk and dawn. (The unit fails in the ON position).
LEAD WIRES: Three color coded, minimum 6” wire leads, #16AWG, rated for 105 °C.
POWER CONSUMPTION: Averages under 1 watt.
TEMPERATURE RANGE: -40 °F to +140 °F (-40 °C to +60 °C).
FAIL MODE: ON.
WARRANTY: 5 years.
*LED rating for UL only.
BO
PBOO
2107 Only
top related