standoffs 10
Post on 01-Dec-2014
89 Views
Preview:
TRANSCRIPT
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
StandOffs at Work
SECURITY CAPS
OPTIONAL CUSTOM COLORS
StandOffs
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
4SO
(Parts include everything shown unless otherwise noted)
Stan
dO
ffs
7 9 9 9 9 11
5 5 5 7 7 7
17 17 19 19 21 Round Caps . . . . . . . . . . . . . . . . . . . 5
Geometric Caps . . . . . . . . . . . . . . . 7
Low Profile Caps . . . . . . . . . . . . . . 9
Security Caps . . . . . . . . . . . . . . . . 11
Barrels . . . . . . . . . . . . . . . . . . . 7 & 13
Hubs . . . . . . . . . . . . . . . . . . . . . . . . . 15
Links & Travelers . . . . . . . . . . . . 17
Grippers . . . . . . . . . . . . . . . . . . . . . 19
Edge Grips . . . . . . . . . . . . . . . . . . . 21
Fixed Hinges . . . . . . . . . . . . . . . . 23
INDEX BY PART # . . . . . . . . . . . . . 24
CONTENTS
11 11 13 & 15 15 17 17
Eclipse Vanity Shelf w/Mirror Aluma Screen, Vanity Partition
Tecno Table, Dining or Conference Trilite Table, End or Display
Quad Lounger Plasma Bot A/V Stand
StandOff Contents
Stainless SteelStainless Steel
21 21 21 21 21
23 23 23
23 23 23
25 25 27 27
Stan
dO
ffs
StructureLite Furniture Preview
5SO
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
6SO
(Parts include everything shown unless otherwise noted)
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
* Female caps come with your choice of stud lengths up to 1-1/2". Longer studs available at additional cost.
Using different colors and layers will
add depth to your display.
StandOff Caps can also be used on
slatwall with the use of a slatwall nut.
Use our vinyl washers and plastic
tubing to protect glass.
Screw cap onto appropriate mounting
hardware. See the Hardware section
for a variety of attachment options.
How To: Round Caps
Having only three corners mounted
has an out-of-the-ordinary appeal.
Round Caps
All StandOff Caps are available in CLEAR and BLACK anodized finish. Black anodize available at additional cost.
SO-CAP7
3/8" Diameter Cap(Specify panel thickness when ordering)
10-24 thread
Part Cap Height Stud Length
SO-CAP7 1/4" Specify *
SO-CAP5ONE PIECE
5/8" Diameter Caps (Specify panel thickness when ordering)
5/16-18 thread
Part Cap Height Stud Length
SO-CAP6 1/4" 1/2" FixedSO-CAP5 1/4" 3/4" Fixed SO-CAP8 5/16" Specify *
SO-CAP6ONE PIECE
SO-CAP8
SO-CAP4
7/8" Diameter Cap (Specify panel thickness when ordering)
5/16-18 thread
Part Cap Height Stud Length
SO-CAP4 3/8" Specify *
SO-CAP10
1-1/2" Diameter Cap (Specify panel thickness when ordering)
5/16-18 thread
Part Cap Height Stud Length
SO-CAP10 1/2" Specify *
1" Diameter (Specify panel thickness when ordering)
Part Cap Height Stud Length
SO-CAP9 3/8" Specify *SO-CAP9CU 3/8" Specify *SO-CAP9SS 3/8" Specify *SO-CAP9SSB 3/8" Specify *
SO-CAP9SSBStainless Steel
Undrilled Blank
SO-CAP9SSStainless Steel5/16-18 thread
SO-CAP9CU1/4-20 Thread
SO-CAP95/16-18 thread
1-1/4" Diameter Caps (Specify panel thickness when ordering)
5/16-18 thread
Part Cap Height Stud Length
SO-CAP1 1/2" 1" FixedSO-ACAP2 3/8" Specify (Low Head )*SO-CAP3 1/2" Specify *
SO-CAP1ONE PIECE
Brushed Alum. SO-Disc1
SO-ACAP2SO-CAP3
SO-CAP22
2" Diameter Cap (Specify panel thickness when ordering)
5/16-18 thread
Part Cap Height Stud Length
SO-CAP22 1/2" Specify *
7SO
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
8SO
(Parts include everything shown unless otherwise noted)
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
Geometric Caps
SO-CAP20
Part Cap Height Stud Length
SO-CAP20 3/8" Specify *
1" Wide Square Cap (Specify panel thickness when ordering)
5/16-18 thread3/8"
1"
SO-HCAP1
Part Cap Height Stud Length
SO-HCAP1 3/8" Specify *
1" Wide Hex Cap(Specify panel thickness when ordering)
5/16-18 thread
1"
3/8"
1-1/4"
Part Cap Height Stud Length
SO-HCAP2 3/8" Specify *
1-1/4" Wide Hex Cap(Specify panel thickness when ordering)
5/16-18 thread
SO-HCAP2
3/8"
* Female caps come with your choice of stud lengths up to 1-1/2". Longer studs available at additional cost.
Layering StandOffs creates
a unique perspective.
Hex Caps are a nice option for an industrial appearance.
The HD-HCW1 adjustable wrench is
available for snugging Hex Caps.
Screw the proper length stud into the
cap and tighten with a Hex wrench.
Insert the cap through the image
and square-up with the barrel. Tighten
the socket set screw supplied
with square barrels.
Part
HD-HCW1 Fits All Hex Caps
Hex Cap Wrench
Made of aluminum to reduce the risk
of damaging the capsHD-HCW1
Barrel length
5/16" x 1/2" Deep
Counterbore
10-24 Nylon Tipset screw
5/16-18Thread
1"
SO-ASQ1 & 2
1" Wide Square BarrelsPart Length Tapped
SO-ASQ1 1" 1/2" one endSO-ASQ2 2" 1/2" one end
How To:Geometric Caps
All StandOff Geometric Caps are available in CLEAR and BLACK anodized finish. Black anodize available at additional cost.
9SO
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
10SO
(Parts include everything shown unless otherwise noted)
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
Low Profile Caps
* Female caps come with your choice of stud lengths up to 1-1/2" . Longer studs available at additional cost .
Combine with Structurelite for fabulous furniture.
Can be used to create transaction tops.
How To:Low Profile Caps
For 1" dia. and larger
Low Profile Caps.
Low Profile Cap
Clear plastic tubing: 1/2" ID x 5/8" OD
Hole size 11/16" Dia.
Plex, glass, wood, etc.
Vinyl washer
5/16-18 threaded
stud
Barrel
Press and turn the neoprene
wrench HD-NW, to tighten caps.
Use the Hex tool (HD-AD2), for
SO-CAP17, SO-CAP18, & SO-CAP19.
Low Profile Caps lend a
sleek appearance to
wall mounted pieces.
All StandOff Low Profile Caps are available in CLEAR and BLACK anodized finish. Black anodize available at additional cost.
3/8" Diameter Cap(See HD-AD2 tool below for tightening)
10-24 threads
Part Cap Height Stud Length
SO-CAP17 1/8" 1/2"SO-CAP17
SO-CAP19SO-CAP18
5/8" Diameter Caps(See HD-AD2 tool below for tightening)
5/16-18 thread
Part Cap Height Stud Length
SO-CAP18 1/8" 1/4"SO-CAP19 1/8" 5/8"
SO-CAP11
1" Diameter Cap(Specify panel thickness when ordering)
5/16-18 thread
Part Cap Height Stud Length
SO-CAP11 1/8" Specify *
SO-CAP12
1-1/4" Diameter Cap(Specify panel thickness when ordering)
5/16-18 threadPart Cap Height Stud Length
SO-CAP12 1/8" Specify *
SO-CAP13
1-1/2" Diameter Cap(Specify panel thickness when ordering)
5/16-18 threadPart Cap Height Stud Length
SO-CAP13 1/8" Specify *
SO-CAP14
2-1/2" Diameter Cap(Specify panel thickness when ordering)
5/16-18 thread
Part Cap Height Stud Length
SO-CAP14 1/8" Specify *
Apply pressure to top of cap with neoprene
wrench and turn.HD-NW HD-AD2
Low Profile Tools
Part Tool HD-NW For Caps 11, 12, 13, & 14. HD-AD2 3/32" Hex tool For Caps 17, 18 & 19
1/2"
1/8"
1/4"
Typical
5/16-18Thread
* Minimum material thickness for the shoulder of these caps is 1/4"
SO-CAP23
2" Diameter Cap(Specify panel thickness when ordering)
5/16-18 thread
Part Cap Height Stud Length
SO-CAP23 1/8" Specify *
11SO
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
12SO
(Parts include everything shown unless otherwise noted)
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
Security Caps
SO-SC95/16"
1"
SO-SC105/16"
1-1/2"
SO-SC35/16"
1-1/4"
Security Caps
Part Diameter
SO-SC9 1"SO-SC3 1-1/4"
SO-SC10 1-1/2"
5/16-18 thread3/32" x 1/4" deep
How To:Security Caps
Security Caps replace standard caps on
this football trophy case to protect the display.
Security Caps are used anywhere our
standard caps might be used but can
be tightened with the HD-SCT to
provide added security when needed.
An HD-SCT is used to tighten
Security Caps to prevent
unwanted cap removal.
Security Cap ToolPart
HD-SCT Fits side hole to tighten capHD-SCT
2"
3/32
See HD-AW4 tool for tightening
Security Cap With Glass or Plastics, use of an
HD-NW750 Vinyl Washer is required .
Part Fits Materials
SO-ASCB 1/4" ThickSO-ASCB1 3/8" ThickSO-ASCB2 1/2" Thick
5/16-18thread
3/32”
13/16"
5/8”
3/32" hex key
SO-ASCB
5/16-18thread
3/32”
11/16"
5/8”
3/32" hex key
SO-ASCB1
5/16-18thread
3/32"
9/16"
5/8"
3 /32" hex key
SO-ASCB2
All StandOff Security Caps are available in CLEAR and BLACK anodized finish. Black anodize available at additional cost.
NOTE: For Glass or Plastic applications vinyl washers and plastic tube are used to prevent
material damage. See Hardware pg. 175
HD-PT3 7/16" O.D.
13SO
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
14SO
(Parts include everything shown unless otherwise noted)
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
Barrels
3/8" Diameter Barrels10-24 internal threads
Part Length Tapped
SO-025 1/4" Hole, no threadsSO-050 1/2" ThruSO-010 1" 1/2" both ends
7/8" D
ia .
Part Length Tapped
SO-1875 7/8” Thru
1-1
/4" D
iam
ete
r
Part Length Tapped
SO-250 1/4" ThruSO-625 5/8" ThruSO-1 1" ThruSO-115 1-1/2" 3/4" both endsSO-2 2" 1" both endsSO-3 3" 1" both endsSO-4 4" 1" both endsSO-6 6" 1" both endsSO-8 8" 1" both endsSO-10 10" 1" both endsSO-12 12" 1" both ends
1-1
/2" D
iam
ete
r Part Length Tapped
SO-1525 1/4" ThruSO-1505 1/2" ThruSO-151 1" ThruSO-152 2" 1" both endsSO-153 3" 1" both endsSO-154 4" 1" both ends
1" D
iam
ete
r
Part Length Tapped
SO-9025 1/4" ThruSO-9050 1/2" ThruSO-9100 1" ThruSO-9150 1-1/2" 3/4" both endsSO-9200 2" 1" both endsSO-9300 3" 1" both endsSO-9400 4" 1" both endsSO-9600 6" 1" both ends
Custom barrel lengths up to 24" are available.
How To:Barrels
You can use barrels on slatwall too.
See the Hardware catalog for options.
To line-up the Square Cap & Barrel,
tighten the set screw while
holding the cap in place.
StandOff components can be mounted to
any wall type (wood, drywall, concrete,
etc.) with the appropriate hardware. See
the Hardware catalog for options.
Barrels are available in many lengths, shapes
and diameters. See the StructureLite section
for 2-1/2" diameter barrels made
from SL-2.5BAR or SL-2.5 TUBE.
Lock the cap stud into the barrel by tightening
the Nylon Tip set screw with a 3/32 Hex Key.
All Barrels below have 5/16-18 internal threads
5/8" D
iam
ete
r
Part Length Tapped
EZ-SP1 3/16" Hole, no threadsSO-500 1/2" ThruSO-750 3/4" ThruSO-100 1" ThruSO-150 1-1/2" 3/4" both endsSO-200 2" 1" both endsSO-300 3" 1" both endsSO-BAR 5 5-3/4" 1" both endsSO-BAR 9 9-3/4" 1" both endsSO-BAR 11 11-3/4" 1" both ends
All StandOff Barrels are available in CLEAR and BLACK anodized finish. Black anodize available at additional cost.
Barrel length
Barrel Length
Bar
rel
Dia
met
er
15SO
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
16SO
(Parts include everything shown unless otherwise noted)
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
Barrels
Use custom lengths to create even
more fabulous designs.
The threaded rod should be 1/2" longer
than the 4-Way extrusion.
Screw the threaded rod into place and
slide 4-Way extrusion over the rod.
Set your panel into the notch
of the 4-Way and screw
on the Cap to hold
everything in place.
Use standard Hubs with Caps & Barrels
to create grid displays.
How To: Hubs Shelf Support
Custom lengths available
SO-A14H-125
SO-A14H-250
SO-A14H-375
SO-A14H-500
1-1/4" Diameter 4-Way Hubs5/16" thru hole
Part Thickness Set Screw
SO-A14H-125 1/8" NoSO-A14H-250 1/4" YesSO-A14H-375 3/8" YesSO-A14H-500 1/2" YesSL-4WH1 Custom Lengths
7/16"
5/16" thru hole
Thickness
10-24Nylon Tip set Screw
3/8"
SO-A24H-500
SO-A24H-375
SO-A24H-250
SO-A24H-1251-1/2" Diameter 4-Way Hubs
5/16" thru hole
Part Thickness Set Screw
SO-A24H-125 1/8" NoSO-A24H-250 1/4" YesSO-A24H-375 3/8" YesSO-A24H-500 1/2" YesSL-4WH2 Custom Lengths
Thickness 9/16"
5/16" thru hole
10-24Nylon Tip set Screw
3/8"
All StandO ff Hubs are avai lable in CLEAR and BL ACK anodized f inish. Black anodize avai lable at addit ional cost.
2" Diameter BarrelsPart Length Tapped
SO-201 1" ThruSO-202 2" 1” both endsSO-203 3" 1” both endsSO-204 4" 1" both endsSO-206 6" 1" both ends
Hubs
17SO
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
18SO
(Parts include everything shown unless otherwise noted)
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
Links & Travelers
Use Links & Travelers with hinges for
adjustable panels. They can be adjusted
up or down and the bar & angles
can also be adjusted.
The Link, Traveler and Fixed Hinge
used in the panel display shown.
How To:Links & Travelers
The assembly is complete, ready for
panel or other attachment.
An SO-ST traveler application that would work
equally well using the SO-TRAV.
The SO-TRAV is attached to the rod
and an SO-Link is attached to it.
Hinge LinksExtends 1-1/4" fixed Hinge sets to make 2-way and 4-way panel connections
or a 90° internal corner
Part ApplicationSO-LINK L Low Head Counterbore SO-LINK T Threaded hole
3/8"
3/4"
5/8"5/16-18
Threads
SO-LINK T
3/8"
3/4"
SO-LINK L
Low HeadCounterbore
5/8"
Traveler Link
Hinge
90°
NOTE: This application photo shows some parts not included when ordering Links & Travelers
StandOff TravelersUsed to attach other components
to 5/8” diameter rod
Part ElementSO-TRAV Round Traveler SO-ST Square Traveler
1-1/4"
5/8"
5/8"
5/16-18Threads
SO-TRAV
SO-ST
5/16-18Thread
5/8"
1-1/4
"
5/8"
Typical Link & Traveler Applications
All StandOff Links are available in CLEAR and BLACK anodized finish. Black anodize available at additional cost.
All StandOff Travelers are available in CLEAR anodize only
19SO
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
20SO
(Parts include everything shown unless otherwise noted)
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
Grippers
Note: Specify the surface that the Gripper will be mounted to, and what panel material will be used.
Cup Point set screw and 5/16-18 fastener included . Nylon Tip set screw optional for glass, and other materials .
SO-AGR250
1/4"
1-3/16"
1-1/
4"
9/32"
2-1/8"
1/4" Gripper(Specify material & application)
Includes 5/16-18 x 3/4" Stud
Part Holds
SO-AGR250 1/4"
SO-AGR375 3/8" Gripper(Specify material & application)
Includes 5/16-18 x 1/2" Low Head
Part Holds
SO-AGR375 3/8"
1/4"
1-3/16"
1-1/
4"
7/16"
2-1/16"
1/2" Gripper(Specify material & application)Includes 5/16-18 x 1/2" Low Head
Part Holds
SO-AGR500 1/2"
1/4"
1-3/16"
1-1/
4"
9/16"
2-3/8"
SO-AGR500
Gripper Assemblies (Specify material & application)
Includes Low Head & (3) Mounting ScrewsWall plate is 2-1/4" diameter x 1/4" thick
Part Holds
SO-AGR250/WMBL 1/4"SO-AGR375/WMBT 3/8"SO-AGR500/WMBT 1/2"SO-AGR750/WMBT 3/4"
SO-AGR250 Thru 750/WMBT
How To: Grippers
Or, mount the Gripper to
a surface then slide panel
into mouth of Gripper and
tighten set screw until snug.
Place a panel in the mouth
of the Gripper. Hold the panel
in place while tightening
the set screw.
Attach the desired part using
a low head socket cap screw
or threaded stud.
Use for suspending…
horizontal applications.
vertical or…
All StandOff Grippers are available in CLEAR and BLACK anodized finish. Black anodize available at additional cost.
SO-AGR750
3/4" Gripper(Specify material & application) Includes 5/16-18 x 1/2" Low Head
Part Holds
SO-AGR750 3/4"
1-3/4
"
1/2"
25/32"
1-15/16"
3-11/64"
5/16-18Cup Pointset screw(typical)
21SO
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
22SO
(Parts include everything shown unless otherwise noted)
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
Edge Grips
1-1/4" Diameter Adjustable Edge Grips
Includes Adjustment Screw and Low Head for mounting
Part Holds Overall Height
SO-AEGCR 1/4"-1/2" 1-1/4"-1-1/2"
SO-AEGSC/16 1/4"-1/2" 1-1/4"-1-1/2"
SO-DISC 1
3/8"
1/4" - 1/2"
5/8"
StandOffReceiver
Edge Grip Disc Cap
SO-AEGCR SO-AEGSC/16
SO-CAP 16
5/16"
1/4" - 1/2"
5/8"
Edge Grip Screw Cap
StandOffReceiver
1/16"
Disc & Cap for use with 1-1/4" dia . Edge Grips
Part Threading
SO-DISC 1 None (self-adhesive)SO-CAP 16 5/16-18SO-DISC 1
1"
SO-CAP 16
1/16"1/4"
1-1/4"
1/32"
Brushed Aluminum
1" Diameter Edge Grips w/Disc Includes Set Screw and Low Head for mounting
Part Holds Overall Height
SO-AEGC125 1/8" 1-1/16"
SO-AEGC250 1/4" 1-1/16"
SO-AEGC375 3/8" 1-1/16"
SO-AEGC500 1/2" 1-1/16"
1/4"
5/32"
21/32"
SO-AEGC125
1/4"
9/32"
17/32"
SO-AEGC250
1/4"
13/32"
SO-AEGC375
13/32"
SO-AEGC500
10-24Nylon Tipset screw
5/16-18x1/2" Low Head
1/4"
17/32"
9/32"
1" Diameter Edge Grips with Threaded Caps
Includes Set Screw and Low Head for mounting
Part Holds Overall Height
SO-AEGTC125/15 1/8" 1-1/16"
SO-AEGTC250/15 1/4" 1-1/16"
SO-AEGTC375/15 3/8" 1-1/16"
SO-AEGTC500/15 1/2" 1-1/16"
SO-AEGTC500/15
17/32"
9/32"
3/16"
13/32"
13/32"
3/16"
SO-CAP 15
10-24Nylon Tipset screw
5/16 x18 x1/2" Low Head
SO-AEGTC375/15
3/16"
9/32"
17/32"
SO-AEGTC 250/15
3/16"5/32"
21/32"
SO-AEGTC 125/15
Disc & Cap for use with 1" dia . Edge Grips
Part Threading
SO-DISC 2 None (self-adhesive)SO-CAP 15 1/2-20
1"
SO-CAP 15
7/8"
SO-DISC 2
Brushed Aluminum
1/32"1/16"
StandOff Systems
components easily
attach to slatwall.
Edge Grips allow a firm hold
without drilling holes in
your display or artwork.
How To:Edge Grips
A Nylon Tip set screw is tightened to
hold 3/8" plexiglass in the Edge Grip.
A Low Head screw is used to attach
an Edge Grip to a mounted Barrel.
A completed Edge Grip installation.
The SO-Cap 16 is installed to finish
the Edge Grip assembly.
SO-DISC 2
All StandOff Edge Grips are available in CLEAR and BLACK anodized finish. Black anodize available at additional cost.
23SO
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
24SO
(Parts include everything shown unless otherwise noted)
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
Fixed Hinges
NOTE: Hinges lock into place and are not meant to be moving parts.
SO-AEGHD
SO-AEGH/16
1-1/4" Fixed Hinge & Adjustable Edge Grip
For Edge Grip specs, see page 21.
Part Diameter Holds
SO-AEGHD 1-1/4" 1/4"-1/2"SO-AEGH/16 1-1/4" 1/4"-1/2"
Note: To increase the amount of available hinge travel see Links on page 17
60°Min
SO-A1H/CAP 9
1" Fixed Hinge & Cap(Specify panel thickness when ordering)
Part Diameter Cap Height
SO-A1H/CAP 9 1" 3/8"
SO-A1H
1" Diameter Fixed Hinge5/16-18 tapped holes.
Part Diameter Thickness
SO-A1H 1" 5/16"
13/16" 13/16"
1-11/16"
1"
SO-A125H
1-5/16" 1-5/16"
2-5/8"
1-1/4"
1-1/4" Diameter Fixed Hinge5/16-18 tapped holes.
Part Diameter Thickness
SO-A125H 1-1/4" 3/8"
SO-A125H/CAP 1 Thru CAP 3
60°Min
1-1/4" Fixed Hinge & CapFor Cap specs, see page 5.
(Specify panel thickness when ordering)
Part Diameter Cap Height
SO-A125H/CAP 1 1-1/4" 1/2"SO-A125H/CAP 2 1-1/4" 3/8"SO-A125H/CAP 3 1-1/4" 1/2"
SO-A1H/EGTC125/15
Thru EGTC500/15
1" Fixed Hinges & Edge Grip w/ Threaded Cap
(Specify panel thickness when ordering)
Part Diameter Holds
SO-A1H/EGTC125/15 1" 1/8" SO-A1H/EGTC250/15 1" 1/4"SO-A1H/EGTC375/15 1" 3/8"SO-A1H/EGTC500/15 1" 1/2"
60°Min
SO-CAP 15
SO-A1H/EGC125
Thru EGC500
1" Fixed Hinge & Edge Grip w/Disc Cap
(Specify panel thickness when ordering)Part Diameter Holds
SO-A1H/EGC125 1" 1/8" SO-A1H/EGC250 1" 1/4"SO-A1H/EGC375 1" 3/8" SO-A1H/EGC500 1" 1/2"
60°Min
SO-DISC 2
SO-DISC 1
SO-CAP 16
How To:StandOffs with
Plexiglass & Glass
Measure and mark the hole centerline.
Carefully drill a 3/8" hole using a plex bit.
When using glass, have your glass shop drill a 1/2" hole then use 7/16" plastic tubing inside the hole
and vinyl washers between glass and Hinge to protect the glass. These parts are found
in the Hardware Catalog on Pg. 175.
Tighten set screw when hinge is at the desired angle. Hinges can be used in
a variety of configurations.
The addition of a Link (pg17),
allows Fixed Hinges to turn
to the inside at 90˚.
Note: Hinges lock into place and are not intended to be used as moving parts.
StandOff Hinges make attractive accents.
Imagine the possibilities!
All StandOff Fixed Hinges are available in CLEAR and BLACK anodized finish. Black anodize available at additional cost.
25SO
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
26SO
(Parts include everything shown unless otherwise noted)
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
Flush-Mount PANEL CLIPS (Includes: Panel Clip, Cap Disc,
#8 Mounting Screw, Anchor and 2 Shims
Part Diameter Holds
SO-APC100 1" 1/8", 3/16" & 1/4"SO-APC125 1-1/4" 1/8”, 3/16” & 1/4”
Panel Clips
SO-APC1001”
Dia.
1/4"
3/8"
5/16"
SO-APC1251-1/4”
Dia.
3/8"
1/4"
7/16"
ADJUSTABLE PANEL EDGE GRIPS Includes Set Screws as shown
Part Diameter Holds
SO-APEG9 1" 1/8" to 1/2"SO-APEG3 1-1/4" 1/8" to 3/4"
SO-APEG3
SO-APEG9
Panel Clips & Panel Edge Grips
How To:Panel Clips
How To:Panel Edge Grips
Position the Cap on the panel, tighten the cap set screw. Slide the Barrels on
the Cap but don’t tighten it’s set screw.
LEVEL
Stick masking tape on the wall where the Barrel will be mounted and mark their positions. Establish the center-point, drill the mounting hole and remove the tape.
Mount the Barrels to the surface, slide the Caps into the Barrels and
now tighten the set screws to complete your installation.
Locate lower Panel Clip mounting positions and attach as above but do not tighten. Choose the proper shim, if required, and set the panel in place. Attach upper Panel Clips and tighten all then insert the brush-finished Disc to complete the installation.
Panel Clips can flush-mount mirrors, graphics and architectural
panels without drilling holes in the panels.
Adjustable Panel Edge Grips take advantage of improved design.
Fewer parts allow greater versatility at a lower cost than other
edge grips and no holes are required in mounted panels.
10-24 Cup Point Set Screw
1-1/4"
1”
10-24 Nylon Tip Set Screw
Length Range:
Min= 1-9/16" Max= 1-15/16"
3/16"
10-24 Cup Point Set Screw
1-1/2"
1-1/4”
10-24 Nylon Tip Set Screw
Length Range:
Min= 1-13/16" Max= 2-7/16"
3/16"
27SO
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
28SO
(Parts include everything shown unless otherwise noted)
Stan
dO
ffs
Grippers
Hubs
Security Caps
Fixed Hinges
Geometric Caps
Edge Grips
Links & Travelers
Round Caps
Barrels
Low Proile Caps
Web Site Link
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
Stainless Steel Caps & Barrels
Barrel Length
Thread
Dia
met
er
#316 STAINLESS STEEL BARRELS
Part Diameter Length Thread
SO-SS1500 1/2" 1/2" 10-24SO-SS1750 1/2" 3/4" 10-24
SO-SS2500 3/4" 1/2" 1/4-20SO-SS2750 3/4" 3/4" 1/4-20SO-SS2100 3/4" 1" 1/4-20
SO-SS3750 1" 3/4" 5/16-18SO-SS3100 1" 1" 5/16-18
SO-SS4100 1-1/4" 1" 5/16-18SO-SS4150 1-1/4" 1-1/2" 5/16-18
Note: Barrel Lengths 1/2” to 1” are threaded thru. 1-1/2” Barrels are threaded 3/4” deep each end.
SO-SSCAP 93/8"
1"
5/16-18 Thread
How To:Stainless SteelBarrels & Caps
This solid surface wall uses combination screws setinto predrilled holes. Other mounting surfaces may
require different fasteners from our Hardware Catalog.
A stainless steel Barrel is attached to the stud.
The proper length hex socket set screw is tightened into the stainless steel cap.
A pre-drilled panel is positioned and caps tightened with a Security Cap Tool
Lots of different barrel diameters and lengths are available
in stainless steel to add new possibilities for your designs.
#316 Stainless Steel Barrels fitted with Security Caps open up
new mounting possibilities for the outdoor, hospitality.
medical and food service industries and others.
SO-SSCAP 4 3/16"
3/16"
1-1/4"
5/16-18 Thread
7/16"
SO-SSCAP 3 3/16"
3/16"
1"
5/16-18 Thread7/16"
SO-SSCAP 2 3/16"
3/16"
3/4"
1/4-20 Thread5/16"
SO-SSCAP 1
1/2"
10-24 Thread
3/16"
1/4"
1/8"
Security Cap Tool See SO-Page 11
HD-SCT
#316 STAINLESS STEEL ROUND CAP
Part Diameter Stud Length
SO-SSCAP 9 1" Specify*
* Female caps come with your choice of stud lengths up to 1-1/2". Longer studs available at additional cost.
#316 STAINLESS STEEL CAPS (Specify panel thickness when ordering)
Part Diameter Stud Length
SO-SSCAP 1 1/2" Specify*SO-SSCAP 2 3/4" Specify*SO-SSCAP 3 1" Specify*SO-SSCAP 4 1-1/4" Specify*
HD-SCT 3/32” Security Cap Tool
Two 3/32” diameter side holes require HD-SCT Security Cap Tool to tighten.
(sold separately, see SO-Page 11),
NOTE: Application Photos
Not Yet Available!
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
Stainless Cap & Barrels
Panel Clips & Adj. Panel EdgeGrips
StandOffs Index by Part #
EZ-SP1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
HD-AD2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
HD-HCW1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
HD-NW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
HD-SCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
SO-010 thru 050 . . . . . . . . . . . . . . . . . . . . . . . . 13
SO-1 thru 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SO-100 thru 750 . . . . . . . . . . . . . . . . . . . . . . . . 13
SO-1505 & 1525 . . . . . . . . . . . . . . . . . . . . . . . . . 13
SO-1875 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SO-201 thru 206 . . . . . . . . . . . . . . . . . . . . . . . . 27
SO-250 & 625 . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SO-8, 10 & 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SO-9025 thru 9600 . . . . . . . . . . . . . . . . . . . . . . 13
SO-A125H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
SO-A125H/CAP 1 thru CAP 3 . . . . . . . . . . . . 23
SO-A14H-125 thru A14H-500 . . . . . . . . . . . . 15
SO-A1H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
SO-A1H/CAP 9 . . . . . . . . . . . . . . . . . . . . . . . . . . 23
SO-A1H/EGC125thru EGC500 . . . . . . . . . . . . 23
SO-A1H/EGTC125/15thru EGTC500/15 . . 23
SO-A24H125 thru A24H500 . . . . . . . . . . . . . 15
SO-ACAP2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
SO-AEGC125 thru AEGC500 . . . . . . . . . . . . . 21
SO-AEGCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
SO-AEGH/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
SO-AEGHD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
SO-AEGSC/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
SO-AEGTC125/15 thru AEGTC500/15 . . . . 21
SO-AGR250 thru AGR750 . . . . . . . . . . . . . . . . 19
SO-APC100-125 . . . . . . . . . . . . . . . . . . . . . . . . . 25
SO-APEG9 & 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
SO-ASCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
SO-ASCB1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
SO-ASCB2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
SO-ASQ1 & 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SO-BARRRELS . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SO-CAP1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
SO-CAP 3 thru 10 & 22 . . . . . . . . . . . . . . . . . . . 5
SO-CAP 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
SO-CAP 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
SO-CAP11 thru CAP14 & 23 . . . . . . . . . . . . . . . 9
SO-CAP17 thru CAP19 . . . . . . . . . . . . . . . . . . . . 9
SO-CAP20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SO-CAP9CU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
SO-CAP9SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
SO-CAP9SSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
SO-DISC 1 & DISC2 . . . . . . . . . . . . . . . . . . . . . . 21
SO-HCAP1 & HCAP2 . . . . . . . . . . . . . . . . . . . . . . 7
SO-LINK L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SO-LINK T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SO-SC3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
SO-SC9 & SC10 . . . . . . . . . . . . . . . . . . . . . . . . . . 11
SO-SS1500 thru 4150 . . . . . . . . . . . . . . . . . . . 27
SO-SSCAP1 thru 4 & 9 . . . . . . . . . . . . . . . . . . . 27
SO-ST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SO-TRAV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
StandOffs Contents
www .standoffsystems .com
Click on the links below to open another catalog!
top related