s commands · • showinterfacebridge-domaindetail, page 522 • showipinterfacebridge-domain, page...

S Commands

• sampling-rate, page 25

• schedule, page 26

• scheduler, page 27

• scheduling, page 28

• scope, page 29

• scvmm, page 31

• second-file, page 32

• security-domain, page 33

• security, page 34

• security allow-promiscuous, page 35

• security forged-transmits, page 36

• security mac-changes, page 37

• send-community, page 38

• server, page 39

• service-policy, page 42

• service, page 47

• session-record-flags, page 48

• set, page 49

• set burst, page 52

• set cir, page 53

• set community, page 54

• set conform-cos-transmit, page 61

• set conform-dscp-transmit, page 62

• set conform, page 63

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 1

• set dampening, page 64

• set dscp-code, page 69

• set dscp, page 70

• set exceed-cos-transmit, page 71

• set exceed-dscp-transmit, page 72

• set exceed, page 73

• set excessive-burst, page 74

• set local-preference, page 75

• set metric-type, page 79

• set metric, page 83

• set mode, page 87

• set next-hop, page 88

• set pir, page 92

• set qos-class, page 93

• set tag, page 95

• set target-dscp, page 99

• set type, page 100

• set violate-cos-transmit, page 101

• set violate-dscp-transmit, page 102

• set violate, page 103

• set weight, page 104

• shellinabox, page 108

• show aaa authentication, page 109

• show aaa groups, page 110

• show access-list, page 111

• show accounting log, page 112

• show acllog deny l2 flow, page 113

• show acllog deny l2 flow tenant vrf, page 114

• show acllog deny l2 flow tenant vrf detail, page 115

• show acllog deny l2 pkt, page 116

• show acllog deny l2 pkt tenant vrf, page 117

• show acllog deny l2 pkt tenant vrf detail, page 118

• show acllog deny l3 flow, page 119

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)2

S Commands

• show acllog deny l3 flow tenant vrf, page 120

• show acllog deny l3 flow tenant vrf detail, page 121

• show acllog deny l3 pkt, page 122

• show acllog deny l3 pkt tenant vrf, page 123

• show acllog deny l3 pkt tenant vrf detail, page 124

• show acllog permit l2 flow tenant vrf, page 126

• show acllog permit l2 flow tenant vrf detail, page 127

• show acllog permit l2 pkt tenant vrf, page 128

• show acllog permit l2 pkt tenant vrf detail, page 129

• show acllog permit l3 flow tenant vrf, page 130

• show acllog permit l3 flow tenant vrf detail, page 131

• show acllog permit l3 pkt tenant vrf, page 132

• show acllog permit l3 pkt tenant vrf detail, page 133

• show analytics, page 135

• show application, page 136

• show audits, page 137

• show audits tenant, page 138

• show audits tenant application, page 139

• show audits tenant application epg, page 140

• show audits tenant bridge-domain, page 141

• show audits tenant bridge-domain detail, page 142

• show audits tenant interface bridge-domain, page 143

• show audits tenant interface bridge-domain detail, page 144

• show audits tenant multicast-route-maps, page 145

• show audits tenant vrf, page 146

• show audits tenant vrf acllog l2, page 147

• show audits tenant vrf acllog l3, page 148

• show audits tenant vrf detail, page 150

• show audits tenant vrf external-l3 bgp, page 151

• show audits tenant vrf external-l3 bgp node, page 152

• show audits tenant vrf external-l3 eigrp, page 153

• show audits tenant vrf external-l3 eigrp detail, page 154

• show audits tenant vrf external-l3 epg, page 155

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 3

S Commands

• show audits tenant vrf external-l3 epg detail, page 156

• show audits tenant vrf external-l3 epg name, page 157

• show audits tenant vrf external-l3 epg name detail, page 158

• show audits tenant vrf external-l3 interfaces, page 159

• show audits tenant vrf external-l3 interfaces detail, page 160

• show audits tenant vrf external-l3 ospf, page 161

• show audits tenant vrf external-l3 ospf detail, page 162

• show audits tenant vrf external-l3 static-route, page 163

• show audits tenant vrf external-l3 static-route detail, page 164

• show audits tenant vrf external-l3 static-route node, page 165

• show audits tenant vrf external-l3 static-route node detail, page 166

• show audits tenant vrf multicast, page 167

• show bridge-domain, page 168

• show bridge-domain detail, page 169

• show callhome, page 170

• show callhome common destination-profile, page 171

• show callhome common query-profile, page 172

• show callhome common transport-email, page 173

• show catalog, page 174

• show cli command, page 175

• show cli internal audit, page 176

• show cli internal transaction, page 177

• show cli internal usage, page 178

• show cli list, page 179

• show cli manpage, page 180

• show cli path, page 181

• show clock, page 182

• show communication ciphers, page 183

• show communication controller, page 184

• show communication http, page 185

• show communication https, page 186

• show communication shellinabox, page 187

• show communication ssh-service, page 188

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)4

S Commands

• show communication telnet, page 189

• show communication web-requests, page 190

• show contract-type, page 191

• show contract, page 192

• show controller, page 193

• show controller detail, page 194

• show cores, page 195

• show cores status, page 196

• show debug counter, page 197

• show debug log, page 198

• show deployment endpoint node, page 199

• show dns-address, page 200

• show dns-domain, page 201

• show dot1q-tunnel, page 202

• show endpoints, page 203

• show endpoints leaf interface ethernet, page 204

• show endpoints leaf interface port-channel, page 205

• show endpoints vpc, page 206

• show epg, page 207

• show epg detail, page 208

• show events, page 209

• show events controller, page 210

• show events controller detail, page 211

• show events leaf, page 212

• show events leaf fex, page 213

• show events leaf fex module, page 214

• show events leaf interface ethernet, page 215

• show events leaf interface l3instance, page 216

• show events leaf interface mgmt, page 217

• show events leaf interface portchannel, page 218

• show events leaf interface tunnel, page 219

• show events leaf inventory chassis, page 220

• show events leaf inventory fans, page 221

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 5

S Commands

• show events leaf inventory module, page 222

• show events leaf inventory module fabricport, page 223

• show events leaf inventory module leafport, page 224

• show events leaf inventory powersupply, page 225

• show events leaf inventory supervisor, page 226

• show events leaf protocol, page 227

• show events leaf vpc, page 228

• show events leaf vrf, page 229

• show events spine, page 230

• show events spine interface ethernet, page 231

• show events spine interface l3instance, page 232

• show events spine interface mgmt, page 233

• show events spine interface tunnel, page 234

• show events spine inventory chassis, page 235

• show events spine inventory fabric, page 236

• show events spine inventory fans, page 237

• show events spine inventory module, page 238

• show events spine inventory module fabricport, page 239

• show events spine inventory powersupply, page 240

• show events spine inventory supervisor, page 241

• show events spine inventory system, page 242

• show events spine protocol, page 243

• show events spine vrf, page 244

• show events tenant, page 245

• show events tenant application, page 246

• show events tenant application epg, page 247

• show events tenant bridge-domain, page 248

• show events tenant bridge-domain detail, page 249

• show events tenant endpoints, page 250

• show events tenant endpoints leaf interface ethernet, page 251

• show events tenant endpoints leaf interface port-channel, page 252

• show events tenant endpoints vpc, page 253

• show events tenant interface bridge-domain, page 255

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)6

S Commands

• show events tenant interface bridge-domain detail, page 256

• show events tenant multicast-route-maps, page 257

• show events tenant vrf, page 258

• show events tenant vrf acllog l2, page 259

• show events tenant vrf acllog l3, page 260

• show events tenant vrf detail, page 262

• show events tenant vrf external-l3 bgp, page 263

• show events tenant vrf external-l3 bgp node, page 264

• show events tenant vrf external-l3 eigrp, page 265

• show events tenant vrf external-l3 eigrp detail, page 266

• show events tenant vrf external-l3 epg, page 267

• show events tenant vrf external-l3 epg detail, page 268

• show events tenant vrf external-l3 epg name, page 269

• show events tenant vrf external-l3 epg name detail, page 270

• show events tenant vrf external-l3 interfaces, page 271

• show events tenant vrf external-l3 interfaces detail, page 272

• show events tenant vrf external-l3 ospf, page 273

• show events tenant vrf external-l3 ospf detail, page 274

• show events tenant vrf external-l3 route-map, page 275

• show events tenant vrf external-l3 route-map detail, page 276

• show events tenant vrf external-l3 static-route, page 277

• show events tenant vrf external-l3 static-route detail, page 278

• show events tenant vrf external-l3 static-route node, page 279

• show events tenant vrf external-l3 static-route node detail, page 280

• show events tenant vrf multicast, page 281

• show external-l2 epg, page 282

• show external-l2 epg name, page 283

• show external-l2 epg tenant, page 284

• show external-l3 bgp, page 285

• show external-l3 bgp tenant, page 286

• show external-l3 bgp tenant vrf, page 287

• show external-l3 bgp tenant vrf node, page 288

• show external-l3 eigrp, page 289

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 7

S Commands

• show external-l3 eigrp detail, page 290

• show external-l3 eigrp node, page 291

• show external-l3 eigrp node detail, page 292

• show external-l3 eigrp tenant, page 293

• show external-l3 eigrp tenant detail, page 294

• show external-l3 eigrp tenant vrf, page 295

• show external-l3 eigrp tenant vrf detail, page 296

• show external-l3 eigrp tenant vrf node, page 297

• show external-l3 eigrp tenant vrf node detail, page 298

• show external-l3 epg, page 299

• show external-l3 epg detail, page 300

• show external-l3 epg name, page 301

• show external-l3 epg name detail, page 302

• show external-l3 epg tenant, page 303

• show external-l3 epg tenant detail, page 304

• show external-l3 epg tenant vrf, page 305

• show external-l3 epg tenant vrf detail, page 306

• show external-l3 interfaces, page 307

• show external-l3 interfaces detail, page 308

• show external-l3 interfaces node, page 309

• show external-l3 interfaces node detail, page 310

• show external-l3 interfaces tenant, page 311

• show external-l3 interfaces tenant detail, page 312

• show external-l3 interfaces tenant vrf, page 313

• show external-l3 interfaces tenant vrf detail, page 314

• show external-l3 interfaces tenant vrf node, page 315

• show external-l3 interfaces tenant vrf node detail, page 316

• show external-l3 ospf, page 317

• show external-l3 ospf detail, page 318

• show external-l3 ospf node, page 319

• show external-l3 ospf node detail, page 320

• show external-l3 ospf tenant, page 321

• show external-l3 ospf tenant detail, page 322

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)8

S Commands

• show external-l3 ospf tenant vrf, page 323

• show external-l3 ospf tenant vrf detail, page 324

• show external-l3 ospf tenant vrf node, page 325

• show external-l3 ospf tenant vrf node detail, page 326

• show external-l3 route-map, page 327

• show external-l3 route-map detail, page 328

• show external-l3 route-map name, page 329

• show external-l3 route-map name detail, page 330

• show external-l3 route-map tenant, page 331

• show external-l3 route-map tenant detail, page 332

• show external-l3 route-map tenant vrf, page 333

• show external-l3 route-map tenant vrf detail, page 334

• show external-l3 route-map tenant vrf node, page 335

• show external-l3 route-map tenant vrf node detail, page 336

• show external-l3 static-route, page 337

• show external-l3 static-route detail, page 338

• show external-l3 static-route node, page 339

• show external-l3 static-route node detail, page 340

• show external-l3 static-route tenant, page 341

• show external-l3 static-route tenant detail, page 342

• show external-l3 static-route tenant vrf, page 343

• show external-l3 static-route tenant vrf detail, page 344

• show external-l3 static-route tenant vrf node, page 345

• show external-l3 static-route tenant vrf node detail, page 346

• show fabric-recovery status, page 347

• show faults, page 348

• show faults controller, page 350

• show faults controller detail, page 351

• show faults l4l7-cluster, page 352

• show faults l4l7-graph, page 353

• show faults leaf, page 354

• show faults leaf fex, page 355

• show faults leaf fex module, page 356

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 9

S Commands

• show faults leaf interface ethernet, page 357

• show faults leaf interface l3instance, page 358

• show faults leaf interface mgmt, page 359

• show faults leaf interface portchannel, page 360

• show faults leaf interface tunnel, page 361

• show faults leaf inventory chassis, page 362

• show faults leaf inventory fans, page 363

• show faults leaf inventory module, page 364

• show faults leaf inventory module fabricport, page 365

• show faults leaf inventory module leafport, page 366

• show faults leaf inventory powersupply, page 367

• show faults leaf inventory supervisor, page 368

• show faults leaf protocol, page 369

• show faults leaf vpc, page 370

• show faults leaf vrf, page 371

• show faults microsoft domain, page 372

• show faults microsoft domain name, page 373

• show faults microsoft domain name hyperv, page 374

• show faults microsoft domain name port-group, page 375

• show faults microsoft domain name scvmm, page 376

• show faults microsoft domain name vm, page 377

• show faults microsoft domain name vm name, page 378

• show faults spine, page 379

• show faults spine interface ethernet, page 380

• show faults spine interface l3instance, page 381

• show faults spine interface mgmt, page 382

• show faults spine interface tunnel, page 383

• show faults spine inventory chassis, page 384

• show faults spine inventory fabric, page 385

• show faults spine inventory fans, page 386

• show faults spine inventory module, page 387

• show faults spine inventory module fabricport, page 388

• show faults spine inventory powersupply, page 389

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)10

S Commands

• show faults spine inventory supervisor, page 390

• show faults spine inventory system, page 391

• show faults spine protocol, page 392

• show faults spine vrf, page 393

• show faults tenant, page 394

• show faults tenant application, page 395

• show faults tenant application epg, page 396

• show faults tenant bridge-domain, page 397

• show faults tenant bridge-domain detail, page 398

• show faults tenant interface bridge-domain, page 399

• show faults tenant interface bridge-domain detail, page 400

• show faults tenant multicast-route-maps, page 401

• show faults tenant vrf, page 402

• show faults tenant vrf acllog l2, page 403

• show faults tenant vrf acllog l3, page 404

• show faults tenant vrf detail, page 406

• show faults tenant vrf external-l3 bgp, page 407

• show faults tenant vrf external-l3 bgp node, page 408

• show faults tenant vrf external-l3 eigrp, page 409

• show faults tenant vrf external-l3 eigrp detail, page 410

• show faults tenant vrf external-l3 epg, page 411

• show faults tenant vrf external-l3 epg detail, page 412

• show faults tenant vrf external-l3 epg name, page 413

• show faults tenant vrf external-l3 epg name detail, page 414

• show faults tenant vrf external-l3 interfaces, page 415

• show faults tenant vrf external-l3 interfaces detail, page 416

• show faults tenant vrf external-l3 ospf, page 417

• show faults tenant vrf external-l3 ospf detail, page 418

• show faults tenant vrf external-l3 static-route, page 419

• show faults tenant vrf external-l3 static-route detail, page 420

• show faults tenant vrf external-l3 static-route node, page 421

• show faults tenant vrf external-l3 static-route node detail, page 422

• show faults tenant vrf multicast, page 423

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 11

S Commands

• show faults vmware domain, page 424

• show faults vmware domain name, page 425

• show faults vmware domain name epg, page 426

• show faults vmware domain name esx, page 427

• show faults vmware domain name port-group, page 428

• show faults vmware domain name trunk-portgroup, page 429

• show faults vmware domain name vcenter, page 430

• show faults vmware domain name vm, page 431

• show faults vmware domain name vm name, page 432

• show fips, page 433

• show firmware repository, page 434

• show firmware repository detail, page 435

• show firmware upgrade status, page 436

• show firmware upgrade status controller-group, page 437

• show firmware upgrade status controller-group detail, page 438

• show firmware upgrade status detail, page 439

• show firmware upgrade status switch-group, page 440

• show firmware upgrade status switch-group detail, page 441

• show flow exporter, page 442

• show flow exporter infra, page 443

• show flow exporter tenant, page 444

• show flow monitor, page 445

• show flow monitor infra, page 446

• show flow monitor tenant, page 447

• show flow node-policy, page 448

• show flow node-policy detail, page 449

• show flow record, page 450

• show flow record infra, page 451

• show flow record tenant, page 452

• show flow vm-exporter, page 453

• show health, page 454

• show health leaf, page 455

• show health leaf fex, page 456

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)12

S Commands

• show health leaf fex module, page 457

• show health leaf interface ethernet, page 458

• show health leaf interface l3instance, page 459

• show health leaf interface mgmt, page 460

• show health leaf interface portchannel, page 461

• show health leaf interface tunnel, page 462

• show health leaf inventory chassis, page 463

• show health leaf inventory fans, page 464

• show health leaf inventory module, page 465

• show health leaf inventory module fabricport, page 466

• show health leaf inventory module leafport, page 467

• show health leaf inventory powersupply, page 468

• show health leaf inventory supervisor, page 469

• show health leaf protocol, page 470

• show health leaf vpc, page 471

• show health leaf vrf, page 472

• show health spine, page 473

• show health spine interface ethernet, page 474

• show health spine interface l3instance, page 475

• show health spine interface mgmt, page 476

• show health spine interface tunnel, page 477

• show health spine inventory chassis, page 478

• show health spine inventory fabric, page 479

• show health spine inventory fans, page 480

• show health spine inventory module, page 481

• show health spine inventory module fabricport, page 482

• show health spine inventory powersupply, page 483

• show health spine inventory supervisor, page 484

• show health spine inventory system, page 485

• show health spine protocol, page 486

• show health spine vrf, page 487

• show health tenant, page 488

• show health tenant application, page 489

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 13

S Commands

• show health tenant application epg, page 490

• show health tenant bridge-domain, page 491

• show health tenant bridge-domain detail, page 492

• show health tenant interface bridge-domain, page 493

• show health tenant interface bridge-domain detail, page 494

• show health tenant multicast-route-maps, page 495

• show health tenant vrf, page 496

• show health tenant vrf acllog l2, page 497

• show health tenant vrf acllog l3, page 498

• show health tenant vrf detail, page 500

• show health tenant vrf external-l3 bgp, page 501

• show health tenant vrf external-l3 bgp node, page 502

• show health tenant vrf external-l3 eigrp, page 503

• show health tenant vrf external-l3 eigrp detail, page 504

• show health tenant vrf external-l3 epg, page 505

• show health tenant vrf external-l3 epg detail, page 506

• show health tenant vrf external-l3 epg name, page 507

• show health tenant vrf external-l3 epg name detail, page 508

• show health tenant vrf external-l3 interfaces, page 509

• show health tenant vrf external-l3 interfaces detail, page 510

• show health tenant vrf external-l3 ospf, page 511

• show health tenant vrf external-l3 ospf detail, page 512

• show health tenant vrf external-l3 static-route, page 513

• show health tenant vrf external-l3 static-route detail, page 514

• show health tenant vrf external-l3 static-route node, page 515

• show health tenant vrf external-l3 static-route node detail, page 516

• show health tenant vrf multicast, page 517

• show inband-mgmt, page 518

• show inband-mgmt controller, page 519

• show inband-mgmt switch, page 520

• show interface bridge-domain, page 521

• show interface bridge-domain detail, page 522

• show ip interface bridge-domain, page 523

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)14

S Commands

• show ipv6 interface bridge-domain, page 524

• show l4l7-cluster, page 525

• show l4l7-graph, page 526

• show l4l7-package, page 527

• show ldap-server, page 528

• show locator-led, page 529

• show locator-led status leaf, page 530

• show microsoft domain, page 531

• show microsoft domain name, page 532

• show microsoft domain name hyperv, page 533

• show microsoft domain name port-group, page 534

• show microsoft domain name scvmm, page 535

• show microsoft domain name vm, page 536

• show microsoft domain name vm name, page 537

• show microsoft vm, page 538

• show monitor access, page 539

• show monitor fabric, page 540

• show monitor tenant, page 541

• show monitor virtual, page 542

• show name-alias tenant, page 543

• show name-alias tenant acl, page 544

• show name-alias tenant application, page 545

• show name-alias tenant application epg, page 546

• show name-alias tenant bridge-domain, page 547

• show name-alias tenant contract, page 548

• show name-alias tenant contract subject, page 549

• show name-alias tenant l3out, page 550

• show name-alias tenant vrf, page 551

• show ntpq, page 552

• show oob-mgmt, page 553

• show oob-mgmt controller, page 554

• show oob-mgmt switch, page 555

• show policy-map, page 556

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 15

S Commands

• show policy-map type data-plane, page 557

• show policy-map type qos, page 558

• show port-channel leaf, page 559

• show port-channel map, page 560

• show port-channel map leaf, page 561

• show radius-server, page 562

• show resource, page 563

• show resource conflict encap-vlan epg, page 564

• show resource conflict encap-vlan epg node, page 565

• show role, page 566

• show running-config, page 567

• show sessions, page 568

• show sessions controller, page 569

• show sessions controller detail, page 570

• show sessions leaf, page 571

• show sessions spine, page 572

• show snapshot active, page 573

• show snapshot files, page 574

• show snapshot jobs, page 575

• show snmp, page 576

• show snmp clientgroups, page 577

• show snmp community, page 578

• show snmp engineid, page 579

• show snmp hosts, page 580

• show snmp summary, page 581

• show snmp users, page 582

• show stats, page 583

• show stats granularity communication controller, page 584

• show stats granularity leaf, page 585

• show stats granularity leaf fex, page 586

• show stats granularity leaf fex module, page 587

• show stats granularity leaf interface ethernet, page 588

• show stats granularity leaf interface mgmt, page 589

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)16

S Commands

• show stats granularity leaf interface portchannel, page 590

• show stats granularity leaf inventory chassis, page 591

• show stats granularity leaf inventory fans, page 592

• show stats granularity leaf inventory powersupply, page 593

• show stats granularity leaf inventory supervisor, page 594

• show stats granularity spine, page 595

• show stats granularity spine interface ethernet, page 596

• show stats granularity spine interface mgmt, page 597

• show stats granularity spine inventory chassis, page 598

• show stats granularity spine inventory fabric, page 599

• show stats granularity spine inventory fans, page 600

• show stats granularity spine inventory module, page 601

• show stats granularity spine inventory powersupply, page 602

• show stats granularity spine inventory supervisor, page 603

• show stats granularity spine inventory system, page 604

• show stats granularity tenant, page 605

• show stats granularity tenant application, page 606

• show stats granularity tenant application epg, page 607

• show stats granularity tenant dot1q-tunnel, page 608

• show stats granularity tenant multicast-route-maps, page 609

• show stats granularity tenant vrf, page 610

• show stats granularity tenant vrf acllog l2, page 611

• show stats granularity tenant vrf acllog l3, page 612

• show stats granularity tenant vrf detail, page 613

• show stats granularity tenant vrf external-l3 bgp, page 614

• show stats granularity tenant vrf external-l3 bgp node, page 615

• show stats granularity tenant vrf external-l3 eigrp, page 616

• show stats granularity tenant vrf external-l3 eigrp detail, page 617

• show stats granularity tenant vrf external-l3 epg, page 618

• show stats granularity tenant vrf external-l3 epg detail, page 619

• show stats granularity tenant vrf external-l3 epg name, page 620

• show stats granularity tenant vrf external-l3 epg name detail, page 621

• show stats granularity tenant vrf external-l3 interfaces, page 622

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 17

S Commands

• show stats granularity tenant vrf external-l3 interfaces detail, page 623

• show stats granularity tenant vrf external-l3 ospf, page 624

• show stats granularity tenant vrf external-l3 ospf detail, page 625

• show stats granularity tenant vrf external-l3 static-route, page 626

• show stats granularity tenant vrf external-l3 static-route detail, page 627

• show stats granularity tenant vrf external-l3 static-route node, page 628

• show stats granularity tenant vrf external-l3 static-route node detail, page 629

• show stats granularity tenant vrf multicast, page 630

• show switch, page 631

• show switch detail, page 632

• show tacacs-server, page 633

• show techsupport all, page 634

• show techsupport controllers, page 635

• show techsupport host, page 636

• show techsupport switch, page 637

• show tenant, page 638

• show tenant access-list, page 639

• show tenant application, page 640

• show tenant application endpoints, page 641

• show tenant application endpoints leaf interface ethernet, page 642

• show tenant application endpoints leaf interface port-channel, page 643

• show tenant application endpoints vpc, page 644

• show tenant application epg, page 645

• show tenant application epg detail, page 646

• show tenant application epg endpoints, page 647

• show tenant application epg endpoints leaf interface ethernet, page 648

• show tenant application epg endpoints leaf interface port-channel, page 649

• show tenant application epg endpoints vpc, page 650

• show tenant bridge-domain, page 652

• show tenant bridge-domain detail, page 653

• show tenant contract-type, page 654

• show tenant contract, page 655

• show tenant detail, page 656

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)18

S Commands

• show tenant dot1q-tunnel, page 657

• show tenant endpoints, page 658

• show tenant endpoints leaf interface ethernet, page 659

• show tenant endpoints leaf interface port-channel, page 660

• show tenant endpoints vpc, page 661

• show tenant epg, page 662

• show tenant epg detail, page 663

• show tenant external-l2 epg, page 664

• show tenant interface bridge-domain, page 665

• show tenant interface bridge-domain detail, page 666

• show tenant ip interface bridge-domain, page 667

• show tenant ipv6 interface bridge-domain, page 668

• show tenant multicast-route-maps, page 669

• show tenant policy-map, page 670

• show tenant policy-map type data-plane, page 671

• show tenant policy-map type qos, page 672

• show tenant vrf, page 673

• show tenant vrf acllog l2, page 674

• show tenant vrf acllog l3, page 675

• show tenant vrf detail, page 676

• show tenant vrf external-l3 bgp, page 677

• show tenant vrf external-l3 bgp node, page 678

• show tenant vrf external-l3 eigrp, page 679

• show tenant vrf external-l3 eigrp detail, page 680

• show tenant vrf external-l3 epg, page 681

• show tenant vrf external-l3 epg detail, page 682

• show tenant vrf external-l3 epg name, page 683

• show tenant vrf external-l3 epg name detail, page 684

• show tenant vrf external-l3 interfaces, page 685

• show tenant vrf external-l3 interfaces detail, page 686

• show tenant vrf external-l3 ospf, page 687

• show tenant vrf external-l3 ospf detail, page 688

• show tenant vrf external-l3 route-map, page 689

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 19

S Commands

• show tenant vrf external-l3 route-map detail, page 690

• show tenant vrf external-l3 static-route, page 691

• show tenant vrf external-l3 static-route detail, page 692

• show tenant vrf external-l3 static-route node, page 693

• show tenant vrf external-l3 static-route node detail, page 694

• show tenant vrf multicast, page 695

• show troubleshoot epext session, page 696

• show troubleshoot epext session atomiccounter, page 697

• show troubleshoot epext session audit, page 698

• show troubleshoot epext session contracts, page 699

• show troubleshoot epext session deployments, page 700

• show troubleshoot epext session events, page 701

• show troubleshoot epext session faults, page 702

• show troubleshoot epext session monitor, page 703

• show troubleshoot epext session reports, page 704

• show troubleshoot epext session statistics, page 705

• show troubleshoot epext session topology, page 706

• show troubleshoot epext session traceroute, page 707

• show troubleshoot epext sessions, page 708

• show troubleshoot eptoep session, page 709

• show troubleshoot eptoep session atomiccounter, page 710

• show troubleshoot eptoep session audit, page 711

• show troubleshoot eptoep session contracts, page 712

• show troubleshoot eptoep session deployments, page 713

• show troubleshoot eptoep session events, page 714

• show troubleshoot eptoep session faults, page 715

• show troubleshoot eptoep session monitor, page 716

• show troubleshoot eptoep session reports, page 717

• show troubleshoot eptoep session statistics, page 718

• show troubleshoot eptoep session topology, page 719

• show troubleshoot eptoep session traceroute, page 720

• show troubleshoot eptoep sessions, page 721

• show username, page 722

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)20

S Commands

• show username detail, page 723

• show version, page 724

• show vlan-domain, page 725

• show vmm internal debug, page 726

• show vmm internal debug epg, page 727

• show vmm internal debug mac, page 728

• show vmware domain, page 729

• show vmware domain name, page 730

• show vmware domain name epg, page 731

• show vmware domain name esx, page 732

• show vmware domain name port-group, page 733

• show vmware domain name trunk-portgroup, page 734

• show vmware domain name vcenter, page 735

• show vmware domain name vm, page 736

• show vmware domain name vm name, page 737

• show vmware vm, page 738

• show vpc, page 739

• show vpc map leaf, page 740

• show vrf, page 741

• show vrf detail, page 742

• show vsan-domain, page 743

• shut, page 744

• shutdown, page 745

• site-id, page 749

• slow-drain congestion-timeout action, page 750

• slow-drain congestion-timeout count, page 753

• slow-drain pause, page 756

• slow-timer, page 759

• snapshot download, page 760

• snapshot export, page 761

• snapshot import, page 762

• snapshot rollback, page 763

• snapshot upload, page 764

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 21

S Commands

• snmp-server clientgroup, page 765

• snmp-server community, page 766

• snmp-server contact, page 767

• snmp-server host, page 768

• snmp-server location, page 769

• snmp-server protocol, page 770

• snmp-server user, page 771

• source, page 772

• source application, page 774

• source interface ethernet, page 775

• source interface port-channel, page 776

• source interface vpc, page 777

• spanning-tree, page 778

• spanning-tree bpdu-filter, page 782

• spanning-tree bpdu-guard, page 783

• speed, page 784

• spf-interval, page 787

• spine-group, page 788

• spine-interface-group, page 789

• spine-interface-policy-group, page 790

• spine-interface-profile, page 792

• spine-profile, page 793

• spine, page 794

• ssh-key, page 795

• ssh-service, page 796

• ssl-protocols, page 797

• ssl-validation-level, page 798

• state, page 799

• static-endpoint, page 800

• static-tep, page 804

• statistics, page 808

• storm-control level, page 809

• storm-control pps, page 812

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)22

S Commands

• street-address, page 815

• subject, page 816

• subnet, page 817

• summary-address, page 818

• svcredir-pol, page 819

• switch-group, page 820

• switch, page 821

• switching, page 822

• switchport, page 823

• switchport access vlan tenant application, page 825

• switchport access vlan tenant external-svi, page 829

• switchport mode, page 832

• switchport port-security maximum, page 836

• switchport port-security violation, page 839

• switchport tenant, page 842

• switchport trunk allowed vlan inband-mgmt, page 845

• switchport trunk allowed vlan tenant application, page 846

• switchport trunk allowed vlan tenant external-l2, page 850

• switchport trunk allowed vlan tenant external-svi, page 853

• switchport trunk allowed vlan tenant legacy-forwarding, page 856

• switchport trunk allowed vsan tenant application, page 859

• switchport trunk native vlan tenant application, page 862

• switchport trunk native vlan tenant external-svi, page 866

• switchport vlan, page 869

• switchport vsan, page 872

• switchport vsan tenant application, page 875

• syslog, page 876

• system cluster-size, page 877

• system controller-id, page 878

• system dynamic-load-balance, page 879

• system fabric-security-mode, page 880

• system jumbomtu, page 881

• system pod, page 882

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 23

S Commands

• system switch-id, page 883

• system use-infra-gipo, page 884

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)24

S Commands

sampling-ratesampling-rate <samplingRate>

Description: Configure Sampling Rate

Syntax:

Configure Sampling Rate. Number range from=0 to=1000samplingRate

Command Mode: flow exporter : Configure NetFlow Exporter Policy

Command Path:

# configure [['terminal', 't']](config)# vmware-domain <WORD> [delimiter <WORD>](config-vmware)# configure-dvs(config-vmware-dvs)# flow exporter <WORD>(config-vmware-dvs-flow-exporter)# sampling-rate <samplingRate>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 25

S Commandssampling-rate

scheduleschedule <WORD>

Description: Assign a scheduler

Syntax:

scheduler name (Max Size 64)WORD

Command Mode: switch-group : Create switch firmware upgrade policy

Command Path:

# configure [['terminal', 't']](config)# firmware(config-firmware)# switch-group <WORD>(config-firmware-switch)# schedule <WORD>

schedule <WORD>

Description: Schedule snapshot export

Syntax:

Scheduler nameWORD

Command Mode: snapshot export : Configuration export setup mode

Command Path:

# configure [['terminal', 't']](config)# snapshot export <WORD>(config-export)# schedule <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)26

S Commandsschedule

schedulerscheduler pause

Description: Pause maintenance policy scheduler

Syntax:

Pause maintenance policy schedulerpause

Command Mode: switch-group : Create switch firmware upgrade policy

Command Path:

# configure [['terminal', 't']](config)# firmware(config-firmware)# switch-group <WORD>(config-firmware-switch)# scheduler pause

scheduler fabric|controller schedule <WORD>

Description: Scheduler configuration mode

Syntax:

Fabric schedulesfabric

Controller schedulescontroller

Configure a scheduleschedule

Schedule name (Max size 64)WORD

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']](config)# scheduler fabric|controller schedule <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 27

S Commandsscheduler

schedulingscheduling <WORD>

Description: Set the scheduling algorithm

Syntax:

Algorithm to chooseWORD

Command Mode: qos parameters : Configure the global QOS policies

Command Path:

# configure [['terminal', 't']](config)# qos parameters level1|level2|level3(config-qos)# scheduling <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)28

S Commandsscheduling

scopescope <WORD>

Description: Specify the scope for the contract

Syntax:

Contract ScopeWORD

Command Mode: contract : Configure binary contracts between Application EPGs

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# scope <WORD>

scope combinable

Description: Set route-profile scope

Syntax:

combinablecombinable

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# scope combinable

scope global

Description: Set scope

Syntax:

Route-map will be available for use on all nodes in this tenant and vrfglobal

Command Mode: route-map : Create route-map or enter route-map command mode

Command Path:

# configure [['terminal', 't']]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 29

S Commandsscope

(config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# scope global

scope combinable

Description: Set route-profile scope

Syntax:

combinablecombinable

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# scope combinable

scope global

Description: Set scope

Syntax:

Route-map will be available for use on all nodes in this tenant and vrfglobal

Command Mode: route-map : Create route-map or enter route-map command mode

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# scope global

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)30

S Commandsscope

scvmmscvmm <arg> cloud <WORD> [name <name>]

Description: Configure an SCVMM in the Microsoft domain

Syntax:

arg

Cloud namecloud

Cloud Name (Max Size 512)WORD

(Optional) SCVMM Controller Namename

Command Mode: microsoft-domain : Create a VMMMicrosoft Domain

Command Path:

# configure [['terminal', 't']](config)# microsoft-domain <WORD> [delimiter <WORD>](config-microsoft)# scvmm <> cloud <WORD> [name <name>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 31

S Commandsscvmm

second-filesecond-file <FILENAME>

Description: Second snapshot file name

Syntax:

Second snapshot file nameFILENAME

Command Mode: snapshot rollback : Configuration rollback setup mode

Command Path:

# configure [['terminal', 't']](config)# snapshot rollback <WORD>(config-rollback)# second-file <FILENAME>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)32

S Commandssecond-file

security-domainsecurity-domain <WORD>

Description: Add security domain

Syntax:

Security-domain nameWORD

Command Mode: vlan-domain : Configure vlan domain

Command Path:

# configure [['terminal', 't']](config)# vlan-domain <name> [dynamic] [type <domain-type>](config-vlan)# security-domain <WORD>

security-domain <WORD>

Description: Add a security domain to this VMware domain

Syntax:

Security domain name (Max Size 64)WORD

Command Mode: vmware-domain : Create a VMM VMWare Domain

Command Path:

# configure [['terminal', 't']](config)# vmware-domain <WORD> [delimiter <WORD>](config-vmware)# security-domain <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 33

S Commandssecurity-domain

securitysecurity domain <WORD>

Description: Add a security domain to the tenant

Syntax:

Domaindomain

Security domain name (Max Size None)WORD

Command Mode: tenant : Tenant configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# security domain <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)34

S Commandssecurity

security allow-promiscuoussecurity allow-promiscuous <WORD>

Description: Enable/Disable promiscuous mode

Syntax:

Enable/Disable promiscuous modeWORD

Command Mode: vmware-domain : Associate EPG to a VMWare Domain

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>][allow-micro-segmentation] [deploy <WORD>] [push <WORD>] [delimiter <WORD>](config-tenant-app-epg-domain)# security allow-promiscuous <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 35

S Commandssecurity allow-promiscuous

security forged-transmitssecurity forged-transmits <WORD>

Description: Accept/Reject Forced Transmits

Syntax:

Accept/Reject Forged TransmitsWORD

Command Mode: vmware-domain : Associate EPG to a VMWare Domain

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>][allow-micro-segmentation] [deploy <WORD>] [push <WORD>] [delimiter <WORD>](config-tenant-app-epg-domain)# security forged-transmits <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)36

S Commandssecurity forged-transmits

security mac-changessecurity mac-changes <WORD>

Description: Accept/Reject Mac Changes

Syntax:

Accept/Reject Mac ChangesWORD

Command Mode: vmware-domain : Associate EPG to a VMWare Domain

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>][allow-micro-segmentation] [deploy <WORD>] [push <WORD>] [delimiter <WORD>](config-tenant-app-epg-domain)# security mac-changes <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 37

S Commandssecurity mac-changes

send-communitysend-community [extended]

Description: Send Community attribute to this neighbor

Syntax:

(Optional) Send Extended Community attributeextended

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# router bgp <fabric-ASN>(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out<WORD>](config-leaf-bgp-vrf-neighbor)# send-community [extended]

send-community [extended]

Description: Send Community attribute to this neighbor

Syntax:

(Optional) Send Extended Community attributeextended

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# router bgp <fabric-ASN>(config-leaf-bgp)# vrf member tenant <WORD> vrf <WORD>(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [evpn] [l3out<WORD>](config-leaf-bgp-vrf-neighbor)# send-community [extended]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)38

S Commandssend-community

serverserver <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

Description: Add LDAP server to LDAP group

Syntax:

LDAP server name or IP addressA.B.C.D|A:B::C:D|WORD

priority of server within grouppriority

Priority of server within group. Number range from=0 to=16<0-16>

Command Mode: aaa group server ldap : LDAP server group name.

Command Path:

# configure [['terminal', 't']](config)# aaa group server ldap <WORD>(config-ldap)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

Description: Add RADIUS server to RADIUS group

Syntax:

RADIUS server name or IP addressA.B.C.D|A:B::C:D|WORD

priority of server within grouppriority

Priority of server within group. Number range from=0 to=16<0-16>

Command Mode: aaa group server radius : RADIUS server group name.

Command Path:

# configure [['terminal', 't']](config)# aaa group server radius <WORD>(config-radius)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

Description: Add TACACS PLUS server to TACACS PLUS group

Syntax:

TACACS PLUS server name or IP addressA.B.C.D|A:B::C:D|WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 39

S Commandsserver

priority of server within grouppriority

Priority of server within group. Number range from=0 to=16<0-16>

Command Mode: aaa group server tacacsplus : TACACS+ server group name.

Command Path:

# configure [['terminal', 't']](config)# aaa group server tacacsplus <WORD>(config-tacacsplus)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

server <WORD> [prefer] [key <arg>] [use-vrf <arg>]

Description: Configure ntp servers for the active ntp policy

Syntax:

Server name/IP for the active ntp policy (Max Size 64)WORD

(Optional) Preferred server for the active ntp policyprefer

(Optional) Reference key id for authentication. Number range from=1to=65535

arg

(Optional) Configure management vrfarg

Command Mode: ntp : Configure the default ntp policy

Command Path:

# configure [['terminal', 't']](config)# pod <NUMBER>(config-pod)# ntp(config-ntp)# server <WORD> [prefer] [key <>] [use-vrf <>]

server <WORD> [prefer] [key <arg>] [use-vrf <arg>]

Description: Configure ntp servers for the active ntp policy

Syntax:

Server name/IP for the active ntp policy (Max Size 64)WORD

(Optional) Preferred server for the active ntp policyprefer

(Optional) Reference key id for authentication. Number range from=1to=65535

arg

(Optional) Configure management vrfarg

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)40

S Commandsserver

Command Mode: template ntp-fabric : Network Time Protocol (NTP)

Command Path:

# configure [['terminal', 't']](config)# template ntp-fabric <WORD>(config-template-ntp-fabric)# server <WORD> [prefer] [key <>] [use-vrf <>]

server <host/ipaddr> [facility <facility>] [severity <severity>] [mgmtepg <mgmtepg>] [port <port>]

Description: Add a destination server

Syntax:

The hostname or ipaddress<host/ipaddr>

(Optional) The forwarding facility level for logs generatedfacility

(Optional) The severity level for logs generatedseverity

(Optional) MgmtEndpointmgmtepg

(Optional) Service port of the remote destination. Number range from=1to=65535

port

Command Mode: logging : Logging server group configuration mode

Command Path:

# configure [['terminal', 't']](config)# logging server-group <WORD>(config-logging)# server <host/ipaddr> [facility <facility>] [severity <severity>] [mgmtepg<mgmtepg>] [port <port>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 41

S Commandsserver

service-policyservice-policy <WORD>

Description: Specify the QOS service policy

Syntax:

Qos Service Policy (Max Size 64)WORD

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# service-policy <WORD>

service-policy <WORD>

Description: Specify the QOS service policy

Syntax:

Service policy to apply (Max Size 64)WORD

Command Mode: external-l2 : L2 external EPG creation/configuration

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# external-l2 epg <WORD>(config-tenant-l2ext-epg)# service-policy <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS service policy

Syntax:

Type of the Qos Policytype

QOS policy for Data Plane Policingdata-plane

Ingress Directioninput

Egress Directionoutput

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)42

S Commandsservice-policy

Qos Policy Name (Max Size 64)WORD

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface vlan <1-4094>(config-leaf-if)# service-policy type data-plane input|output <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS service policy

Syntax:

Type of the Qos Policytype

QOS policy for Data Plane Policingdata-plane

Ingress Directioninput

Egress Directionoutput

Qos Policy Name (Max Size 64)WORD

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface ethernet <ifRange>(config-leaf-if)# service-policy type data-plane input|output <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS service policy

Syntax:

Type of the Qos Policytype

QOS policy for Data Plane Policingdata-plane

Ingress Directioninput

Egress Directionoutput

Qos Policy Name (Max Size 64)WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 43

S Commandsservice-policy

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# service-policy type data-plane input|output <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS service policy

Syntax:

Type of the Qos Policytype

QOS policy for Data Plane Policingdata-plane

Ingress Directioninput

Egress Directionoutput

Qos Policy Name (Max Size 64)WORD

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface vlan <1-4094>(config-leaf-if)# service-policy type data-plane input|output <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS service policy

Syntax:

Type of the Qos Policytype

QOS policy for Data Plane Policingdata-plane

Ingress Directioninput

Egress Directionoutput

Qos Policy Name (Max Size 64)WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)44

S Commandsservice-policy

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface ethernet <ifRange>(config-leaf-if)# service-policy type data-plane input|output <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS service policy

Syntax:

Type of the Qos Policytype

QOS policy for Data Plane Policingdata-plane

Ingress Directioninput

Egress Directionoutput

Qos Policy Name (Max Size 64)WORD

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# interface port-channel <WORD> [fex <fex>](config-leaf-if)# service-policy type data-plane input|output <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS service policy

Syntax:

Type of the Qos Policytype

QOS policy for Data Plane Policingdata-plane

Ingress Directioninput

Egress Directionoutput

Qos Policy Name (Max Size 64)WORD

Command Mode: interface : Provide VPC Name

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 45

S Commandsservice-policy

Command Path:

# configure [['terminal', 't']](config)# vpc context leaf <101-4000> <101-4000> [fex <fex>](config-vpc)# interface vpc <WORD> [fex <fex>](config-vpc-if)# service-policy type data-plane input|output <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)46

S Commandsservice-policy

serviceservice <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>][svcredir <Service Redirection>] [service-type <Service Type>]

Description: Configure L4-L7 Service

Syntax:

Service node name (Max Size 64)WORD

(Optional) Tenant name (Max Size 63)WORD

(Optional) Device cluster name (Max Size 64)WORD

(Optional) Configure service node modeAvailable Modes

(Optional) Configure service redirectionService Redirection

(Optional) Configure service node typeService Type

Command Mode: l4l7 graph : Configure L4-L7 Service Graph

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# l4l7 graph <WORD> [contract <contract-option>](config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode<Available Modes>] [svcredir <Service Redirection>] [service-type <Service Type>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 47

S Commandsservice

session-record-flagssession-record-flags <sessionRecordFlags>

Description: Enable/Disable refresh in the session records, Comma separated values

Syntax:

Session record flags as comma separated values like val1,val2,..valN<sessionRecordFlags>

Command Mode: crypto webtoken : The cryptographic data used for generating and verifying web tokens.

Command Path:

# configure [['terminal', 't']](config)# crypto webtoken(config-webtoken)# session-record-flags <sessionRecordFlags>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)48

S Commandssession-record-flags

setset qos-class <WORD>

Description: QOS level for the epg

Syntax:

QOS level for the epgqos-class

Qos LevelWORD

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# epg <WORD> [type <WORD>](config-tenant-app-epg)# set qos-class <WORD>

set qos-class <WORD>

Description: QOS level for the application

Syntax:

QOS level for the applicationqos-class

Qos LevelWORD

Command Mode: application : application configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# application <WORD>(config-tenant-app)# set qos-class <WORD>

set qos-class <WORD>

Description: QOS level for the tunnel

Syntax:

QOS level for the tunnelqos-class

Qos LevelWORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 49

S Commandsset

Command Mode: dot1q-tunnel : Tunnel configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# dot1q-tunnel <WORD>(config-tenant-tunnel)#set qos-class <WORD>

set qos-class <contractQosLevel>

Description: Specify the QOS level for the epg

Syntax:

class of QOS to specifyqos-class

{unspecified|level1|level2|level3}<contractQosLevel>

Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties orcreate new inband

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# inband-mgmt epg <WORD>(config-inb-epg)# set qos-class <contractQosLevel>

set qos-class <WORD>

Description: QOS level for the epg

Syntax:

QOS level for the epgqos-class

Qos LevelWORD

Command Mode: external-l2 : L2 external EPG creation/configuration

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# external-l2 epg <WORD>(config-tenant-l2ext-epg)# set qos-class <WORD>

set qos-class <contractQosLevel>

Description: QOS level for the epg

Syntax:

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)50

S Commandsset

class of QOS to specifyqos-class

{unspecified|level1|level2|level3}<contractQosLevel>

Command Mode: oob-mgmt : Creates/Modify the out of band mgmt under the tenant mgmt

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# oob-mgmt epg <epgval>(config-oob-epg)# set qos-class <contractQosLevel>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 51

S Commandsset

set burstset burst <0-549755813760> UNIT

Description: Burst Rate

Syntax:

Burst Rate<0-549755813760>

Burst Rate UnitUNIT

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set burst <0-549755813760> UNIT

set burst <0-549755813760> UNIT

Description: Burst Rate

Syntax:

Burst Rate<0-549755813760>

Burst Rate UnitUNIT

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set burst <0-549755813760> UNIT

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)52

S Commandsset burst

set cirset cir <0-4398046510080> UNIT

Description: Committed Rate

Syntax:

Committed Rate<0-4398046510080>

Committed Rate UnitUNIT

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set cir <0-4398046510080> UNIT

set cir <0-4398046510080> UNIT

Description: Committed Rate

Syntax:

Committed Rate<0-4398046510080>

Committed Rate UnitUNIT

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set cir <0-4398046510080> UNIT

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 53

S Commandsset cir

set communityset community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

BGP regular communityregular

BGP extended communityextended

Community value in aa:nn formatvalue

Add to existing communityadditive

Replace existing communityreplace

Do not change communitynone

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set community regular|extended <value>additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

BGP regular communityregular

BGP extended communityextended

Community value in aa:nn formatvalue

Add to existing communityadditive

Replace existing communityreplace

Do not change communitynone

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)54

S Commandsset community

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set community regular|extended <value>additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

BGP regular communityregular

BGP extended communityextended

Community value in aa:nn formatvalue

Add to existing communityadditive

Replace existing communityreplace

Do not change communitynone

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set community regular|extended <value>additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

BGP regular communityregular

BGP extended communityextended

Community value in aa:nn formatvalue

Add to existing communityadditive

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 55

S Commandsset community

Replace existing communityreplace

Do not change communitynone

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

BGP regular communityregular

BGP extended communityextended

Community value in aa:nn formatvalue

Add to existing communityadditive

Replace existing communityreplace

Do not change communitynone

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

BGP regular communityregular

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)56

S Commandsset community

BGP extended communityextended

Community value in aa:nn formatvalue

Add to existing communityadditive

Replace existing communityreplace

Do not change communitynone

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

BGP regular communityregular

BGP extended communityextended

Community value in aa:nn formatvalue

Add to existing communityadditive

Replace existing communityreplace

Do not change communitynone

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set community regular|extended <value>additive|replace|none

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 57

S Commandsset community

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

BGP regular communityregular

BGP extended communityextended

Community value in aa:nn formatvalue

Add to existing communityadditive

Replace existing communityreplace

Do not change communitynone

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set community regular|extended <value>additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

BGP regular communityregular

BGP extended communityextended

Community value in aa:nn formatvalue

Add to existing communityadditive

Replace existing communityreplace

Do not change communitynone

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)58

S Commandsset community

(config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

BGP regular communityregular

BGP extended communityextended

Community value in aa:nn formatvalue

Add to existing communityadditive

Replace existing communityreplace

Do not change communitynone

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

BGP regular communityregular

BGP extended communityextended

Community value in aa:nn formatvalue

Add to existing communityadditive

Replace existing communityreplace

Do not change communitynone

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 59

S Commandsset community

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set community regular|extended <value>additive|replace|none

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)60

S Commandsset community

set conform-cos-transmitset conform-cos-transmit <0-6>

Description: Conform Policer Mark Cos

Syntax:

Conform Policer Mark Cos<0-6>

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set conform-cos-transmit <0-6>

set conform-cos-transmit <0-6>

Description: Conform Policer Mark Cos

Syntax:

Conform Policer Mark Cos<0-6>

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set conform-cos-transmit <0-6>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 61

S Commandsset conform-cos-transmit

set conform-dscp-transmitset conform-dscp-transmit <0-63>

Description: Conform Policer Mark DSCP

Syntax:

Conform Policer Mark DSCP<0-63>

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set conform-dscp-transmit <0-63>

set conform-dscp-transmit <0-63>

Description: Conform Policer Mark DSCP

Syntax:

Conform Policer Mark DSCP<0-63>

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set conform-dscp-transmit <0-63>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)62

S Commandsset conform-dscp-transmit

set conformset conform <WORD>

Description: Conform Policer Action

Syntax:

Conform Policer ActionWORD

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set conform <WORD>

set conform <WORD>

Description: Conform Policer Action

Syntax:

Conform Policer ActionWORD

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set conform <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 63

S Commandsset conform

set dampeningset dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Decay half life. Number range from=1 to=60<1-60>

Value to start reusing a route. Number range from=1 to=20000<1-20000>

Value to start suppressing a route. Number range from=1 to=20000<1-20000>

Maximum suppress time for stable route. Number range from=1 to=255<1-255>

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Decay half life. Number range from=1 to=60<1-60>

Value to start reusing a route. Number range from=1 to=20000<1-20000>

Value to start suppressing a route. Number range from=1 to=20000<1-20000>

Maximum suppress time for stable route. Number range from=1 to=255<1-255>

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)64

S Commandsset dampening

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Decay half life. Number range from=1 to=60<1-60>

Value to start reusing a route. Number range from=1 to=20000<1-20000>

Value to start suppressing a route. Number range from=1 to=20000<1-20000>

Maximum suppress time for stable route. Number range from=1 to=255<1-255>

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Decay half life. Number range from=1 to=60<1-60>

Value to start reusing a route. Number range from=1 to=20000<1-20000>

Value to start suppressing a route. Number range from=1 to=20000<1-20000>

Maximum suppress time for stable route. Number range from=1 to=255<1-255>

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 65

S Commandsset dampening

Syntax:

Decay half life. Number range from=1 to=60<1-60>

Value to start reusing a route. Number range from=1 to=20000<1-20000>

Value to start suppressing a route. Number range from=1 to=20000<1-20000>

Maximum suppress time for stable route. Number range from=1 to=255<1-255>

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Decay half life. Number range from=1 to=60<1-60>

Value to start reusing a route. Number range from=1 to=20000<1-20000>

Value to start suppressing a route. Number range from=1 to=20000<1-20000>

Maximum suppress time for stable route. Number range from=1 to=255<1-255>

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Decay half life. Number range from=1 to=60<1-60>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)66

S Commandsset dampening

Value to start reusing a route. Number range from=1 to=20000<1-20000>

Value to start suppressing a route. Number range from=1 to=20000<1-20000>

Maximum suppress time for stable route. Number range from=1 to=255<1-255>

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Decay half life. Number range from=1 to=60<1-60>

Value to start reusing a route. Number range from=1 to=20000<1-20000>

Value to start suppressing a route. Number range from=1 to=20000<1-20000>

Maximum suppress time for stable route. Number range from=1 to=255<1-255>

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Decay half life. Number range from=1 to=60<1-60>

Value to start reusing a route. Number range from=1 to=20000<1-20000>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 67

S Commandsset dampening

Value to start suppressing a route. Number range from=1 to=20000<1-20000>

Maximum suppress time for stable route. Number range from=1 to=255<1-255>

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

Decay half life. Number range from=1 to=60<1-60>

Value to start reusing a route. Number range from=1 to=20000<1-20000>

Value to start suppressing a route. Number range from=1 to=20000<1-20000>

Maximum suppress time for stable route. Number range from=1 to=255<1-255>

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)68

S Commandsset dampening

set dscp-codeset dscp-code <dscp-prop> <dscp-val>

Description: Set DSCP Class translation values

Syntax:

DSCP Class Namedscp-prop

Dscp valdscp-val

Command Mode: qos : Set DSCP Class translation values

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# qos dscp-map <WORD>(config-qos-cmap)# set dscp-code <dscp-prop> <dscp-val>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 69

S Commandsset dscp-code

set dscpset dscp <WORD>

Description: Specify the DSCP level for the EPG

Syntax:

DSCP valueWORD

Command Mode: external-l3 epg : External L3 EPG configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>](config-tenant-l3ext-epg)# set dscp <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)70

S Commandsset dscp

set exceed-cos-transmitset exceed-cos-transmit <0-6>

Description: Exceed Policer Mark Cos

Syntax:

Exceed Policer Mark Cos<0-6>

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set exceed-cos-transmit <0-6>

set exceed-cos-transmit <0-6>

Description: Exceed Policer Mark Cos

Syntax:

Exceed Policer Mark Cos<0-6>

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set exceed-cos-transmit <0-6>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 71

S Commandsset exceed-cos-transmit

set exceed-dscp-transmitset exceed-dscp-transmit <0-63>

Description: Exceed Policer Mark DSCP

Syntax:

Exceed Policer Mark DSCP<0-63>

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set exceed-dscp-transmit <0-63>

set exceed-dscp-transmit <0-63>

Description: Exceed Policer Mark DSCP

Syntax:

Exceed Policer Mark DSCP<0-63>

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set exceed-dscp-transmit <0-63>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)72

S Commandsset exceed-dscp-transmit

set exceedset exceed <WORD>

Description: Exceed Policer Action

Syntax:

Exceed Policer ActionWORD

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set exceed <WORD>

set exceed <WORD>

Description: Exceed Policer Action

Syntax:

Exceed Policer ActionWORD

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set exceed <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 73

S Commandsset exceed

set excessive-burstset excessive-burst <0-549755813760> UNIT

Description: Excessive Burst Rate

Syntax:

Excessive Burst Rate<0-549755813760>

Excessive Burst Rate UnitUNIT

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set excessive-burst <0-549755813760> UNIT

set excessive-burst <0-549755813760> UNIT

Description: Excessive Burst Rate

Syntax:

Excessive Burst Rate<0-549755813760>

Excessive Burst Rate UnitUNIT

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set excessive-burst <0-549755813760> UNIT

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)74

S Commandsset excessive-burst

set local-preferenceset local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Preference value<0-4294967295>

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Preference value<0-4294967295>

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Preference value<0-4294967295>

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 75

S Commandsset local-preference

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Preference value<0-4294967295>

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Preference value<0-4294967295>

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Preference value<0-4294967295>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)76

S Commandsset local-preference

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Preference value<0-4294967295>

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Preference value<0-4294967295>

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Preference value<0-4294967295>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 77

S Commandsset local-preference

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Preference value<0-4294967295>

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

Preference value<0-4294967295>

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)78

S Commandsset local-preference

set metric-typeset metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type><metric-type>

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type><metric-type>

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type><metric-type>

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 79

S Commandsset metric-type

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type><metric-type>

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type><metric-type>

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type><metric-type>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)80

S Commandsset metric-type

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type><metric-type>

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type><metric-type>

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type><metric-type>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 81

S Commandsset metric-type

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type><metric-type>

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type><metric-type>

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set metric-type <metric-type>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)82

S Commandsset metric-type

set metricset metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Metric value. Number range from=0 to=255<0-255>

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Metric value. Number range from=0 to=255<0-255>

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Metric value. Number range from=0 to=255<0-255>

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 83

S Commandsset metric

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Metric value. Number range from=0 to=255<0-255>

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Metric value. Number range from=0 to=255<0-255>

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Metric value. Number range from=0 to=255<0-255>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)84

S Commandsset metric

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Metric value. Number range from=0 to=255<0-255>

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Metric value. Number range from=0 to=255<0-255>

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Metric value. Number range from=0 to=255<0-255>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 85

S Commandsset metric

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Metric value. Number range from=0 to=255<0-255>

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

Metric value. Number range from=0 to=255<0-255>

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set metric <NUMBER>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)86

S Commandsset metric

set modeset mode <WORD>

Description: Policer Mode

Syntax:

Policer ModeWORD

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set mode <WORD>

set mode <WORD>

Description: Policer Mode

Syntax:

Policer ModeWORD

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set mode <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 87

S Commandsset mode

set next-hopset next-hop <IPv4 or IPv6 address>

Description: Set next hop for destination routing protocol

Syntax:

Next hop addressIPv4 or IPv6 address

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set next-hop <IPv4 or IPv6 address>

set next-hop <IPv4 or IPv6 address>

Description: Set next hop address

Syntax:

Next hop addressIPv4 or IPv6 address

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set next-hop <IPv4 or IPv6 address>

set next-hop <IPv4 or IPv6 address>

Description: Set next hop address

Syntax:

Next hop addressIPv4 or IPv6 address

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)88

S Commandsset next-hop

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set next-hop <IPv4 or IPv6 address>

set next-hop <IPv4 or IPv6 address>

Description: Set next hop address

Syntax:

Next hop addressIPv4 or IPv6 address

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>

set next-hop <IPv4 or IPv6 address>

Description: Set next hop address

Syntax:

Next hop addressIPv4 or IPv6 address

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>

set next-hop <IPv4 or IPv6 address>

Description: Set next hop address

Syntax:

Next hop addressIPv4 or IPv6 address

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 89

S Commandsset next-hop

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>

set next-hop <IPv4 or IPv6 address>

Description: Set next hop address

Syntax:

Next hop addressIPv4 or IPv6 address

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set next-hop <IPv4 or IPv6 address>

set next-hop <IPv4 or IPv6 address>

Description: Set next hop address

Syntax:

Next hop addressIPv4 or IPv6 address

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set next-hop <IPv4 or IPv6 address>

set next-hop <IPv4 or IPv6 address>

Description: Set next hop address

Syntax:

Next hop addressIPv4 or IPv6 address

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)90

S Commandsset next-hop

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>

set next-hop <IPv4 or IPv6 address>

Description: Set next hop address

Syntax:

Next hop addressIPv4 or IPv6 address

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>

set next-hop <IPv4 or IPv6 address>

Description: Set next hop address

Syntax:

Next hop addressIPv4 or IPv6 address

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set next-hop <IPv4 or IPv6 address>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 91

S Commandsset next-hop

set pirset pir <0-4398046510080> UNIT

Description: Peak Rate

Syntax:

Peak Rate<0-4398046510080>

Pir UnitUNIT

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set pir <0-4398046510080> UNIT

set pir <0-4398046510080> UNIT

Description: Peak Rate

Syntax:

Peak Rate<0-4398046510080>

Pir UnitUNIT

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set pir <0-4398046510080> UNIT

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)92

S Commandsset pir

set qos-classset qos-class <WORD>

Description: Class of QOS to specify

Syntax:

Qos LevelWORD

Command Mode: contract : Configure binary contracts between Application EPGs

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# set qos-class <WORD>

set qos-class <WORD> WORD

Description: Class of QOS to specify

Syntax:

Qos LevelWORD

Target QOS DirectionWORD

Command Mode: subject : Configuration a subject on the contract

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# subject <WORD>(config-tenant-contract-subj)# set qos-class <WORD> WORD

set qos-class unspecified|level1|level2|level3

Description: Specify the QOS level for the EPG

Syntax:

Unspecified QoS levelunspecified

QoS level1level1

QoS level2level2

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 93

S Commandsset qos-class

QoS level3level3

Command Mode: external-l3 epg : External L3 EPG configuration mode

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>](config-tenant-l3ext-epg)# set qos-class unspecified|level1|level2|level3

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)94

S Commandsset qos-class

set tagset tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

Tag value. Number range from=0 to=4294967295<0-4294967295>

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set tag <NUMBER>

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

Tag value. Number range from=0 to=4294967295<0-4294967295>

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set tag <NUMBER>

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

Tag value. Number range from=0 to=4294967295<0-4294967295>

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 95

S Commandsset tag

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set tag <NUMBER>

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

Tag value. Number range from=0 to=4294967295<0-4294967295>

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set tag <NUMBER>

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

Tag value. Number range from=0 to=4294967295<0-4294967295>

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set tag <NUMBER>

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

Tag value. Number range from=0 to=4294967295<0-4294967295>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)96

S Commandsset tag

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set tag <NUMBER>

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

Tag value. Number range from=0 to=4294967295<0-4294967295>

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set tag <NUMBER>

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

Tag value. Number range from=0 to=4294967295<0-4294967295>

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set tag <NUMBER>

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

Tag value. Number range from=0 to=4294967295<0-4294967295>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 97

S Commandsset tag

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set tag <NUMBER>

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

Tag value. Number range from=0 to=4294967295<0-4294967295>

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set tag <NUMBER>

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

Tag value. Number range from=0 to=4294967295<0-4294967295>

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set tag <NUMBER>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)98

S Commandsset tag

set target-dscpset target-dscp <WORD>

Description: class of target dscp to specify

Syntax:

Target dscpWORD

Command Mode: contract : Configure binary contracts between Application EPGs

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# set target-dscp <WORD>

set target-dscp <WORD> WORD

Description: class of target dscp to specify

Syntax:

Target dscpWORD

Target DSCP DirectionWORD

Command Mode: subject : Configuration a subject on the contract

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# contract <WORD> [type <type>](config-tenant-contract)# subject <WORD>(config-tenant-contract-subj)# set target-dscp <WORD> WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 99

S Commandsset target-dscp

set typeset type <WORD>

Description: Policer type

Syntax:

Policer TypeWORD

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set type <WORD>

set type <WORD>

Description: Policer type

Syntax:

Policer TypeWORD

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set type <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)100

S Commandsset type

set violate-cos-transmitset violate-cos-transmit <0-6>

Description: Violate Policer Mark Cos

Syntax:

Violate Policer Mark Cos<0-6>

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set violate-cos-transmit <0-6>

set violate-cos-transmit <0-6>

Description: Violate Policer Mark Cos

Syntax:

Violate Policer Mark Cos<0-6>

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set violate-cos-transmit <0-6>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 101

S Commandsset violate-cos-transmit

set violate-dscp-transmitset violate-dscp-transmit <0-63>

Description: Violate Policer Mark DSCP

Syntax:

Violate Policer Mark DSCP<0-63>

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set violate-dscp-transmit <0-63>

set violate-dscp-transmit <0-63>

Description: Violate Policer Mark DSCP

Syntax:

Violate Policer Mark DSCP<0-63>

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set violate-dscp-transmit <0-63>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)102

S Commandsset violate-dscp-transmit

set violateset violate <WORD>

Description: Violate Policer Action

Syntax:

Violate Policer ActionWORD

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']](config)# policy-map type data-plane <WORD>(config-pmap-dpp)# set violate <WORD>

set violate <WORD>

Description: Violate Policer Action

Syntax:

Violate Policer ActionWORD

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# policy-map type data-plane <WORD>(config-tenant-pmap-dpp)# set violate <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 103

S Commandsset violate

set weightset weight <NUMBER>

Description:Weight value for destination routing protocol

Syntax:

Weight value. Number range from=0 to=65535<0-65535>

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']](config)# tenant <WORD>(config-tenant)# vrf context <WORD>(config-tenant-vrf)# route-profile <WORD>(config-tenant-vrf-route-profile)# set weight <NUMBER>

set weight <NUMBER>

Description:Weight value for destination routing protocol

Syntax:

Weight value. Number range from=0 to=65535<0-65535>

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set weight <NUMBER>

set weight <NUMBER>

Description:Weight value for destination routing protocol

Syntax:

Weight value. Number range from=0 to=65535<0-65535>

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)104

S Commandsset weight

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set weight <NUMBER>

set weight <NUMBER>

Description:Weight value for destination routing protocol

Syntax:

Weight value. Number range from=0 to=65535<0-65535>

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set weight <NUMBER>

set weight <NUMBER>

Description:Weight value for destination routing protocol

Syntax:

Weight value. Number range from=0 to=65535<0-65535>

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set weight <NUMBER>

set weight <NUMBER>

Description:Weight value for destination routing protocol

Syntax:

Weight value. Number range from=0 to=65535<0-65535>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 105

S Commandsset weight

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# leaf <101-4000>(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set weight <NUMBER>

set weight <NUMBER>

Description:Weight value for destination routing protocol

Syntax:

Weight value. Number range from=0 to=65535<0-65535>

CommandMode: template route-profile : Configure route-profile template under tenant for BGP dampeningand route redistribution

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# template route-profile <WORD> tenant <WORD>(config-leaf-template-route-profile)# set weight <NUMBER>

set weight <NUMBER>

Description:Weight value for destination routing protocol

Syntax:

Weight value. Number range from=0 to=65535<0-65535>

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out forbridge-domain export

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# template route-profile <WORD> <WORD> <NUMBER>(config-leaf-vrf-template-route-profile)# set weight <NUMBER>

set weight <NUMBER>

Description:Weight value for destination routing protocol

Syntax:

Weight value. Number range from=0 to=65535<0-65535>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)106

S Commandsset weight

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match bridge-domain <> [tenant <tenant>](config-leaf-vrf-route-map-match)# set weight <NUMBER>

set weight <NUMBER>

Description:Weight value for destination routing protocol

Syntax:

Weight value. Number range from=0 to=65535<0-65535>

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match prefix-list <WORD>(config-leaf-vrf-route-map-match)# set weight <NUMBER>

set weight <NUMBER>

Description:Weight value for destination routing protocol

Syntax:

Weight value. Number range from=0 to=65535<0-65535>

Command Mode: match route group : Route group

Command Path:

# configure [['terminal', 't']](config)# spine <101-4000>(config-spine)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>](config-leaf-vrf)# route-map <WORD>(config-leaf-vrf-route-map)# match route group <> [order <order>](config-leaf-vrf-route-map-match)# set weight <NUMBER>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 107

S Commandsset weight

shellinaboxshellinabox

Description: Configures the communication policy of the SHELLINABOX feature

Command Mode: comm-policy : Configure any communication policy, ssh/telnet/shellinabox/http/https

Usage:

In the APIC GUI, the SHELLINABOX feature allows you to open a pop-up SSH session to a fabric switchby right-clicking the icon of the switch. To enable or disable this feature, use the shellinabox command toenter the SHELLINABOX communication policy group, then use the [no] admin-state-enable command.

Command Path:

# configure [['terminal', 't']](config)# comm-policy <WORD>(config-comm-policy)# shellinabox

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)108

S Commandsshellinabox

show aaa authenticationshow aaa authentication

Description: Show AAA Authentication information

Command Mode: exec : Exec Mode

Command Path:

# show aaa authentication

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 109

S Commandsshow aaa authentication

show aaa groupsshow aaa groups

Description: Show AAA group information

Command Mode: exec : Exec Mode

Command Path:

# show aaa groups

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)110

S Commandsshow aaa groups

show access-listshow access-list WORD

Description: Show Access-list Information

Syntax:

Name of the Contract to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show access-list WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 111

S Commandsshow access-list

show accounting logshow accounting log

Description: CLI configuration command logs

Command Mode: exec : Exec Mode

Command Path:

# show accounting log

NOTE:

This command displays only those changes made using the command line interface (CLI). It does not displaychanges made using the GUI or the API. To view all changes made in the Management Information Tree, usethe show audit detail command.

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)112

S Commandsshow accounting log

show acllog deny l2 flowshow acllog deny l2 flow

Description: l3 flow information

Command Mode: exec : Exec Mode

Command Path:

# show acllog deny l2 flow

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 113

S Commandsshow acllog deny l2 flow

show acllog deny l2 flow tenant vrfshow acllog deny l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcIntf <srcintf>] <WORD>

Description: tenant vrf information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) source Interfacesrcintf

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show acllog deny l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcIntf <srcintf>] <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)114

S Commandsshow acllog deny l2 flow tenant vrf

show acllog deny l2 flow tenant vrf detailshow acllog deny l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcIntf <srcintf>] <WORD> detail [srcmac<E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

Description: detail information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) source Interfacesrcintf

Name of the VRF to filter on (Max Size 64)WORD

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

Command Mode: exec : Exec Mode

Command Path:

# show acllog deny l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcIntf <srcintf>] <WORD>detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 115

S Commandsshow acllog deny l2 flow tenant vrf detail

show acllog deny l2 pktshow acllog deny l2 pkt

Description: Pkt command

Command Mode: exec : Exec Mode

Command Path:

# show acllog deny l2 pkt

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)116

S Commandsshow acllog deny l2 pkt

show acllog deny l2 pkt tenant vrfshow acllog deny l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]

Description: Vrf Name

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the vrf to filter on (Max Size 64)WORD

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) Source Interfacesrcintf

(Optional) packet length. Number range from=1 to=65535<1-65535>

Command Mode: exec : Exec Mode

Command Path:

# show acllog deny l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>][srcintf <srcintf>] [pktlen <NUMBER>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 117

S Commandsshow acllog deny l2 pkt tenant vrf

show acllog deny l2 pkt tenant vrf detailshow acllog deny l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

Description: Detail information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the vrf to filter on (Max Size 64)WORD

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) Source Interfacesrcintf

(Optional) packet length. Number range from=1 to=65535<1-65535>

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

Command Mode: exec : Exec Mode

Command Path:

# show acllog deny l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>][srcintf <srcintf>] [pktlen <NUMBER>] detail [srcmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)118

S Commandsshow acllog deny l2 pkt tenant vrf detail

show acllog deny l3 flowshow acllog deny l3 flow

Description: l3 flow information

Command Mode: exec : Exec Mode

Command Path:

# show acllog deny l3 flow

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 119

S Commandsshow acllog deny l3 flow

show acllog deny l3 flow tenant vrfshow acllog deny l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>][protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD>

Description: tenant vrf information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) ProtocolProtocol

(Optional) source portSrcPort

(Optional) destination portDstPort

(Optional) source interfacesrcintf

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show acllog deny l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.Dor A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf<srcintf>] <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)120

S Commandsshow acllog deny l3 flow tenant vrf

show acllog deny l3 flow tenant vrf detailshow acllog deny l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>][protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD> detail [srcmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]

Description: detail information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) ProtocolProtocol

(Optional) source portSrcPort

(Optional) destination portDstPort

(Optional) source interfacesrcintf

Name of the VRF to filter on (Max Size 64)WORD

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

Command Mode: exec : Exec Mode

Command Path:

# show acllog deny l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.Dor A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf<srcintf>] <WORD> detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 121

S Commandsshow acllog deny l3 flow tenant vrf detail

show acllog deny l3 pktshow acllog deny l3 pkt

Description: Pkt command

Command Mode: exec : Exec Mode

Command Path:

# show acllog deny l3 pkt

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)122

S Commandsshow acllog deny l3 pkt

show acllog deny l3 pkt tenant vrfshow acllog deny l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>][dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]

Description: Vrf Name

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the vrf to filter on (Max Size 64)WORD

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) protocolprotocol

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) Source port. Number range from=0 to=65535<0-65535>

(Optional) Destination port. Number range from=0 to=65535<0-65535>

(Optional) source Interfacesrcintf

(Optional) packet length. Number range from=1 to=65535<1-65535>

Command Mode: exec : Exec Mode

Command Path:

# show acllog deny l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>][srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport<NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 123

S Commandsshow acllog deny l3 pkt tenant vrf

show acllog deny l3 pkt tenant vrf detailshow acllog deny l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>][dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

Description: Detail information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the vrf to filter on (Max Size 64)WORD

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) protocolprotocol

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) Source port. Number range from=0 to=65535<0-65535>

(Optional) Destination port. Number range from=0 to=65535<0-65535>

(Optional) source Interfacesrcintf

(Optional) packet length. Number range from=1 to=65535<1-65535>

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

Command Mode: exec : Exec Mode

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)124

S Commandsshow acllog deny l3 pkt tenant vrf detail

Command Path:

# show acllog deny l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>][srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport<NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>] detail [srcmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 125

S Commandsshow acllog deny l3 pkt tenant vrf detail

show acllog permit l2 flow tenant vrfshow acllog permit l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcintf <srcintf>] <WORD>

Description: tenant vrf information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) source interfacesrcintf

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show acllog permit l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcintf <srcintf>] <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)126

S Commandsshow acllog permit l2 flow tenant vrf

show acllog permit l2 flow tenant vrf detailshow acllog permit l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcintf <srcintf>] <WORD> detail [srcmac<E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

Description: detail information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) source interfacesrcintf

Name of the VRF to filter on (Max Size 64)WORD

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

Command Mode: exec : Exec Mode

Command Path:

# show acllog permit l2 flow tenant <WORD> vrf [vlan <NUMBER>] [srcintf <srcintf>] <WORD>detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 127

S Commandsshow acllog permit l2 flow tenant vrf detail

show acllog permit l2 pkt tenant vrfshow acllog permit l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]

Description: Vrf Name

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the vrf to filter on (Max Size 64)WORD

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) source Interfacesrcintf

(Optional) packet length. Number range from=1 to=65535<1-65535>

Command Mode: exec : Exec Mode

Command Path:

# show acllog permit l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>][srcintf <srcintf>] [pktlen <NUMBER>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)128

S Commandsshow acllog permit l2 pkt tenant vrf

show acllog permit l2 pkt tenant vrf detailshow acllog permit l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

Description: Detail information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the vrf to filter on (Max Size 64)WORD

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) source Interfacesrcintf

(Optional) packet length. Number range from=1 to=65535<1-65535>

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

Command Mode: exec : Exec Mode

Command Path:

# show acllog permit l2 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [vlan <NUMBER>][srcintf <srcintf>] [pktlen <NUMBER>] detail [srcmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 129

S Commandsshow acllog permit l2 pkt tenant vrf detail

show acllog permit l3 flow tenant vrfshow acllog permit l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>][protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD>

Description: tenant vrf information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) ProtocolProtocol

(Optional) source portSrcPort

(Optional) destination portDstPort

(Optional) source interfacesrcintf

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show acllog permit l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.Dor A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf<srcintf>] <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)130

S Commandsshow acllog permit l3 flow tenant vrf

show acllog permit l3 flow tenant vrf detailshow acllog permit l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>][protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf <srcintf>] <WORD> detail [srcmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]

Description: detail information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) ProtocolProtocol

(Optional) source portSrcPort

(Optional) destination portDstPort

(Optional) source interfacesrcintf

Name of the VRF to filter on (Max Size 64)WORD

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

Command Mode: exec : Exec Mode

Command Path:

# show acllog permit l3 flow tenant <WORD> vrf [srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.Dor A:B::C:D>] [protocol <Protocol>] [srcport <SrcPort>] [dstport <DstPort>] [srcintf<srcintf>] <WORD> detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 131

S Commandsshow acllog permit l3 flow tenant vrf detail

show acllog permit l3 pkt tenant vrfshow acllog permit l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>][dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]

Description: Vrf Name

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the vrf to filter on (Max Size 64)WORD

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) protocolprotocol

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) Source port. Number range from=0 to=65535<0-65535>

(Optional) Destination port. Number range from=0 to=65535<0-65535>

(Optional) source Interfacesrcintf

(Optional) packet length. Number range from=1 to=65535<1-65535>

Command Mode: exec : Exec Mode

Command Path:

# show acllog permit l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>][srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport<NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)132

S Commandsshow acllog permit l3 pkt tenant vrf

show acllog permit l3 pkt tenant vrf detailshow acllog permit l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>][end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>] [srcip <A.B.C.D or A:B::C:D>][dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport <NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>]detail [srcmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

Description: Detail information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the vrf to filter on (Max Size 64)WORD

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Event activity in time intervaltime-stamp<YYYY-MM-DDTHR:MIN:SEC>

(Optional) protocolprotocol

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) IP address in format i.i.i.i or IPv6 address in formatxxxx:xxxx, xxxx::xx

A.B.C.D or A:B::C:D

(Optional) Source port. Number range from=0 to=65535<0-65535>

(Optional) Destination port. Number range from=0 to=65535<0-65535>

(Optional) source Interfacesrcintf

(Optional) packet length. Number range from=1 to=65535<1-65535>

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

Command Mode: exec : Exec Mode

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 133

S Commandsshow acllog permit l3 pkt tenant vrf detail

Command Path:

# show acllog permit l3 pkt tenant <WORD> vrf <WORD> [start-time time-stamp<YYYY-MM-DDTHR:MIN:SEC>] [end-time time-stamp <YYYY-MM-DDTHR:MIN:SEC>] [protocol <protocol>][srcip <A.B.C.D or A:B::C:D>] [dstip <A.B.C.D or A:B::C:D>] [srcport <NUMBER>] [dstport<NUMBER>] [srcintf <srcintf>] [pktlen <NUMBER>] detail [srcmac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [dstmac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE >]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)134

S Commandsshow acllog permit l3 pkt tenant vrf detail

show analyticsshow analytics

Description: Show analytics cluster configuration

Command Mode: exec : Exec Mode

Command Path:

# show analytics

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 135

S Commandsshow analytics

show applicationshow application WORD

Description: Show Application Profiles Information

Syntax:

Name of the application we eventually want to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show application WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)136

S Commandsshow application

show auditsshow audits [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

Description: Show audit-log information

Syntax:

(Optional) Log ID<log-id>

(Optional) Object action indicatoraction<action-type>

(Optional) Name of user<user-name>

(Optional) Logs created in time interval. Number range from=1 to=59<num-minutes>

(Optional) Logs created in time interval. Number range from=1 to=23<num-hours>

(Optional) Logs created in time interval. Number range from=1 to=999<num-days>

(Optional) Logs created in time interval<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Logs created in time intervalend-time<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Detailed audit-log information. Displays what was modifiedand displays the old and new settings.

detail

command scope<scope>

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 137

S Commandsshow audits

show audits tenantshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD

Description: Show Tenants Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)138

S Commandsshow audits tenant

show audits tenant applicationshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD

Description: Show Application Profiles Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the application we eventually want to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 139

S Commandsshow audits tenant application

show audits tenant application epgshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD

Description: Show Application EPG Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the application we eventually want to filter on (Max Size 64)WORD

Name of the AEPG to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)140

S Commandsshow audits tenant application epg

show audits tenant bridge-domainshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the bridge-domain (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 141

S Commandsshow audits tenant bridge-domain

show audits tenant bridge-domain detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the bridge-domain (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)142

S Commandsshow audits tenant bridge-domain detail

show audits tenant interface bridge-domainshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the bridge-domain (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 143

S Commandsshow audits tenant interface bridge-domain

show audits tenant interface bridge-domain detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the bridge-domain (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)144

S Commandsshow audits tenant interface bridge-domain detail

show audits tenant multicast-route-mapsshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps

Description: Show multicast route-maps per Tenant

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 145

S Commandsshow audits tenant multicast-route-maps

show audits tenant vrfshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD

Description: Show VRF Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)146

S Commandsshow audits tenant vrf

show audits tenant vrf acllog l2show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER>srcintf <srcintf>

Description: L2 flow stats

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

permitDroppermitDrop

flowi statsflow

vlan infovlan

<vlan>. Number range from=0 to=9223372036854775807<vlan>

source interfacesrcintf

<srcintf><srcintf>

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan<NUMBER> srcintf <srcintf>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 147

S Commandsshow audits tenant vrf acllog l2

show audits tenant vrf acllog l3show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.Dor A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>

Description: L3 flow stats

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

permitDroppermitDrop

flow statsflow

source ipsrcip

IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D

destination ipdstip

IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D

protocolproto

<proto><proto>

source portsrcport

<srcport><srcport>

destination portdstport

<dstport><dstport>

source interfacesrcintf

<srcintf><srcintf>

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)148

S Commandsshow audits tenant vrf acllog l3

<A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport<dstport> srcintf <srcintf>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 149

S Commandsshow audits tenant vrf acllog l3

show audits tenant vrf detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail

Description: Show detailed view of VRF

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)150

S Commandsshow audits tenant vrf detail

show audits tenant vrf external-l3 bgpshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp

Description: Show command for BGP peers

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 151

S Commandsshow audits tenant vrf external-l3 bgp

show audits tenant vrf external-l3 bgp nodeshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>

Description: node to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Leaf Range or Leaf Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)152

S Commandsshow audits tenant vrf external-l3 bgp node

show audits tenant vrf external-l3 eigrpshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp

Description: Show external l3 EIGRP

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 153

S Commandsshow audits tenant vrf external-l3 eigrp

show audits tenant vrf external-l3 eigrp detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail

Description: Show interanl details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)154

S Commandsshow audits tenant vrf external-l3 eigrp detail

show audits tenant vrf external-l3 epgshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>

Description: Show command for external-l3 epgs

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Name of the EPG to filter on<epgName>

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 155

S Commandsshow audits tenant vrf external-l3 epg

show audits tenant vrf external-l3 epg detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Name of the EPG to filter on<epgName>

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)156

S Commandsshow audits tenant vrf external-l3 epg detail

show audits tenant vrf external-l3 epg nameshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

Description: EPG name to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Name of the EPG to filter on<epgName>

Name of the EPG to filter on<epgName>

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name<epgName>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 157

S Commandsshow audits tenant vrf external-l3 epg name

show audits tenant vrf external-l3 epg name detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>detail

Description: external-l3 epg in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Name of the EPG to filter on<epgName>

Name of the EPG to filter on<epgName>

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name<epgName> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)158

S Commandsshow audits tenant vrf external-l3 epg name detail

show audits tenant vrf external-l3 interfacesshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces

Description: Show tenant <tenant> vrf <vrf> external l3 interfaces

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 159

S Commandsshow audits tenant vrf external-l3 interfaces

show audits tenant vrf external-l3 interfaces detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail

Description: Show interanl details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)160

S Commandsshow audits tenant vrf external-l3 interfaces detail

show audits tenant vrf external-l3 ospfshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf

Description: Show command for IPv4 and IPv6 external l3 OSPF configuration

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 161

S Commandsshow audits tenant vrf external-l3 ospf

show audits tenant vrf external-l3 ospf detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail

Description: Show internal details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)162

S Commandsshow audits tenant vrf external-l3 ospf detail

show audits tenant vrf external-l3 static-routeshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route

Description: Show command for external-l3 static routes

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 163

S Commandsshow audits tenant vrf external-l3 static-route

show audits tenant vrf external-l3 static-route detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail

Description: static-route in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)164

S Commandsshow audits tenant vrf external-l3 static-route detail

show audits tenant vrf external-l3 static-route nodeshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node

Description: node to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Leaf Range or Leaf Name Listarg

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 165

S Commandsshow audits tenant vrf external-l3 static-route node

show audits tenant vrf external-l3 static-route node detailshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail

Description: static-route in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Leaf Range or Leaf Name Listarg

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)166

S Commandsshow audits tenant vrf external-l3 static-route node detail

show audits tenant vrf multicastshow audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast

Description: Show multicast configuration per VRF

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>][last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 167

S Commandsshow audits tenant vrf multicast

show bridge-domainshow bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

Name of the bridge-domain (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show bridge-domain WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)168

S Commandsshow bridge-domain

show bridge-domain detailshow bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

Name of the bridge-domain (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show bridge-domain WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 169

S Commandsshow bridge-domain detail

show callhomeshow callhome common

Description: Show command for callhome

Syntax:

Commoncommon

Command Mode: exec : Exec Mode

Command Path:

# show callhome common

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)170

S Commandsshow callhome

show callhome common destination-profileshow callhome common destination-profile

Description: Show command for callhome destination-profile

Syntax:

Commoncommon

Command Mode: exec : Exec Mode

Command Path:

# show callhome common destination-profile

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 171

S Commandsshow callhome common destination-profile

show callhome common query-profileshow callhome common query-profile

Description: Show command for callhome destination-profile

Syntax:

Commoncommon

Command Mode: exec : Exec Mode

Command Path:

# show callhome common query-profile

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)172

S Commandsshow callhome common query-profile

show callhome common transport-emailshow callhome common transport-email

Description: Show command for callhome transport-email

Syntax:

Commoncommon

Command Mode: exec : Exec Mode

Command Path:

# show callhome common transport-email

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 173

S Commandsshow callhome common transport-email

show catalogshow catalog

Description: Show catalog information

Command Mode: exec : Exec Mode

Command Path:

# show catalog

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)174

S Commandsshow catalog

show cli commandshow cli command <WORD> [mode <mode-name>]

Description: Show Commands Syntax

Syntax:

Command Name pattern between single quotesWORD

(Optional) Mode name pattern between single quotes<mode-name>

(Optional) Show Command Detailsdetails

Command Mode: exec : Exec Mode

Command Path:

# show cli command <WORD> [mode <mode-name>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 175

S Commandsshow cli command

show cli internal auditshow cli internal audit

Description: Show Commands Audit

Command Mode: exec : Exec Mode

Command Path:

# show cli internal audit

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)176

S Commandsshow cli internal audit

show cli internal transactionshow cli internal transaction logs|xml <NUMBER>

Description: Show Transaction Details

Syntax:

Show Transaction Logslogs

Show Transaction XML Postxml

Transaction ID(TID) to grep log lines with similar TIDs. TID can beextracted from the 'show cli internal audit' command. Number rangefrom=0 to=9223372036854775807

<Transaction ID>

Command Mode: exec : Exec Mode

Command Path:

# show cli internal transaction logs|xml <NUMBER>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 177

S Commandsshow cli internal transaction

show cli internal usageshow cli internal usage

Description: Show Commands with Usage Callback

Syntax:

(Optional) Show Command Detailsdetails

Command Mode: exec : Exec Mode

Command Path:

# show cli internal usage

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)178

S Commandsshow cli internal usage

show cli listshow cli list [mode <mode-name>]

Description: Show all cli-related commands

Syntax:

(Optional) Mode name pattern between single quotes<mode-name>

(Optional) Show Command Detailsdetails

Command Mode: exec : Exec Mode

Command Path:

# show cli list [mode <mode-name>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 179

S Commandsshow cli list

show cli manpageshow cli manpage <WORD> [mode <mode-name>]

Description: Show Commands ManPage

Syntax:

Command Name pattern between single quotesWORD

(Optional) Mode name pattern between single quotes<mode-name>

(Optional) Show Command Detailsdetails

Command Mode: exec : Exec Mode

Command Path:

# show cli manpage <WORD> [mode <mode-name>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)180

S Commandsshow cli manpage

show cli pathshow cli path <WORD> [mode <mode-name>]

Description: Show Commands Path

Syntax:

Command Name pattern between single quotesWORD

(Optional) Mode name pattern between single quotes<mode-name>

(Optional) Show Command Detailsdetails

Command Mode: exec : Exec Mode

Command Path:

# show cli path <WORD> [mode <mode-name>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 181

S Commandsshow cli path

show clockshow clock

Description: Show clock information

Command Mode: exec : Exec Mode

Command Path:

# show clock

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)182

S Commandsshow clock

show communication ciphersshow communication ciphers

Description: HTTPS service cipher suite listings

Command Mode: exec : Exec Mode

Command Path:

# show communication ciphers

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 183

S Commandsshow communication ciphers

show communication controllershow communication controller node-id

Description: Show command for nginx web-requests

Syntax:

node-idnode-id

Command Mode: exec : Exec Mode

Command Path:

# show communication controller node-id

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)184

S Commandsshow communication controller

show communication httpshow communication http

Description: HTTP service settings

Command Mode: exec : Exec Mode

Command Path:

# show communication http

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 185

S Commandsshow communication http

show communication httpsshow communication https

Description: HTTPS service settings

Command Mode: exec : Exec Mode

Command Path:

# show communication https

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)186

S Commandsshow communication https

show communication shellinaboxshow communication shellinabox

Description: Shellinabox service settings

Command Mode: exec : Exec Mode

Command Path:

# show communication shellinabox

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 187

S Commandsshow communication shellinabox

show communication ssh-serviceshow communication ssh-service

Description: SSH service settings

Command Mode: exec : Exec Mode

Command Path:

# show communication ssh-service

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)188

S Commandsshow communication ssh-service

show communication telnetshow communication telnet

Description: Telnet service settings

Command Mode: exec : Exec Mode

Command Path:

# show communication telnet

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 189

S Commandsshow communication telnet

show communication web-requestsshow communication web-requests

Description: Status of last web requests

Command Mode: exec : Exec Mode

Command Path:

# show communication web-requests

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)190

S Commandsshow communication web-requests

show contract-typeshow contract-type WORD

Description: Show Contracts Information Based on Type

Syntax:

whitelist (permit) or blacklist(deny) or oob-mgmt type of contractWORD

Command Mode: exec : Exec Mode

Command Path:

# show contract-type WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 191

S Commandsshow contract-type

show contractshow contract WORD

Description: Show Contracts Information

Syntax:

Name of the Contract to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show contract WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)192

S Commandsshow contract

show controllershow controller

Description: Show controller information

Command Mode: exec : Exec Mode

Command Path:

# show controller

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 193

S Commandsshow controller

show controller detailshow controller detail [id <node-id>]

Description: Detailed controller information

Syntax:

(Optional) Optional Serial numbernode-id

Command Mode: exec : Exec Mode

Command Path:

# show controller detail [id <node-id>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)194

S Commandsshow controller detail

show coresshow cores

Description: Show all core dumps

Command Mode: exec : Exec Mode

Command Path:

# show cores

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 195

S Commandsshow cores

show cores statusshow cores status

Description: Show exported core status

Command Mode: exec : Exec Mode

Command Path:

# show cores status

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)196

S Commandsshow cores status

show debug countershow debug <node-name> <process> counter <counterTopics>

Description: Show Counter information

Syntax:

Node name<node-name>

Process name<process>

Counter Topics<counterTopics>

Command Mode: exec : Exec Mode

Command Path:

# show debug <node-name> <process> counter <counterTopics>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 197

S Commandsshow debug counter

show debug logshow debug <node-name> <process> log

Description: Show log level information

Syntax:

Node name<node-name>

Process name<process>

Command Mode: exec : Exec Mode

Command Path:

# show debug <node-name> <process> log

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)198

S Commandsshow debug log

show deployment endpoint nodeshow deployment endpoint node <node>

Description: Node id

Syntax:

<node><node>

Command Mode: exec : Exec Mode

Command Path:

# show deployment endpoint node <node>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 199

S Commandsshow deployment endpoint node

show dns-addressshow dns-address

Description: Show dns address information

Command Mode: exec : Exec Mode

Command Path:

# show dns-address

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)200

S Commandsshow dns-address

show dns-domainshow dns-domain

Description: Show dns domain information

Command Mode: exec : Exec Mode

Command Path:

# show dns-domain

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 201

S Commandsshow dns-domain

show dot1q-tunnelshow dot1q-tunnel WORD

Description: Show Dot1q-tunnel Information

Syntax:

Name of the AEPG to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show dot1q-tunnel WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)202

S Commandsshow dot1q-tunnel

show endpointsshow endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan<NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]

Description: Show IP endpoints

Syntax:

(Optional) Endpoint Typetype

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) IP Unicast address in format i.i.i.iA.B.C.D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D

Command Mode: exec : Exec Mode

Command Path:

# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 203

S Commandsshow endpoints

show endpoints leaf interface ethernetshow endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan<NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>

Description: Show IP endpoints on an interface ethernet

Syntax:

(Optional) Endpoint Typetype

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) IP Unicast address in format i.i.i.iA.B.C.D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D

Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807

WORD

Ethernet Rangeethernet [<fex>/]<slot>/<port>

Command Mode: exec : Exec Mode

Command Path:

# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet[<fex>/]<slot>/<port>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)204

S Commandsshow endpoints leaf interface ethernet

show endpoints leaf interface port-channelshow endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan<NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]

Description: Show IP endpoints on an interface port-channel

Syntax:

(Optional) Endpoint Typetype

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) IP Unicast address in format i.i.i.iA.B.C.D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D

Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807

WORD

Port Channel Name (Max Size 64)WORD

(Optional) Fex Id. Number range from=101 to=164<101-164>

Command Mode: exec : Exec Mode

Command Path:

# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel<WORD> [fex <NUMBER>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 205

S Commandsshow endpoints leaf interface port-channel

show endpoints vpcshow endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan<NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex<fex>]

Description: Show IP endpoints on vpc

Syntax:

(Optional) Endpoint Typetype

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) IP Unicast address in format i.i.i.iA.B.C.D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D

VPC Contextcontext

First VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807

WORD

Second VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807

WORD

VPC Interface nameinterface

VPC Interface namevpc

VPC Name (Max Size 64)WORD

(Optional) Fex Id. Number range from=101 to=164fex

Command Mode: exec : Exec Mode

Command Path:

# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE>] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interfacevpc <WORD> [fex <fex>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)206

S Commandsshow endpoints vpc

show epgshow epg WORD

Description: Show Application EPG Information

Syntax:

Name of the AEPG to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show epg WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 207

S Commandsshow epg

show epg detailshow epg WORD detail

Description: Show detailed view of Application EPg

Syntax:

Name of the AEPG to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show epg WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)208

S Commandsshow epg detail

show eventsshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

Description: Show event information

Syntax:

(Optional) Event code<event-code>

(Optional) Event ID<event-ID>

(Optional) Cause<event-value>

(Optional) Event activity in time interval. Number range from=1 to=59last-minutes <num-minutes>

(Optional) Event activity in time interval. Number range from=1 to=23last-hours <num-hours>

(Optional) Event activity in time interval. Number range from=1 to=999last-days <num-days>

(Optional) Event activity in time intervalstart-time<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Event activity in time intervalend-time<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Detailed event informationdetail

command scope<scope>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 209

S Commandsshow events

show events controllershow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] controller

Description: Show controller information

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)210

S Commandsshow events controller

show events controller detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]

Description: Detailed controller information

Syntax:

(Optional) Optional Serial numbernode-id

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 211

S Commandsshow events controller detail

show events leafshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>

Description: Show command for leaf

Syntax:

Leaf id<leafId>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)212

S Commandsshow events leaf

show events leaf fexshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>

Description: Show extended chassis information

Syntax:

Leaf id<leafId>

pls enter fex number<fexNum>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 213

S Commandsshow events leaf fex

show events leaf fex moduleshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>

Description: Show inventory module information

Syntax:

Leaf id<leafId>

pls enter fex number<fexNum>

please enter the module number<lcSlot>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)214

S Commandsshow events leaf fex module

show events leaf interface ethernetshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>

Description: Ethernet IEEE 802.3z

Syntax:

Leaf id<leafId>

<slot or chassis-number/port or slot number><phyInt>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 215

S Commandsshow events leaf interface ethernet

show events leaf interface l3instanceshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>

Description: L3 instance

Syntax:

Leaf id<leafId>

<L3 instance number><l3Inst>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)216

S Commandsshow events leaf interface l3instance

show events leaf interface mgmtshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>

Description:Management interface

Syntax:

Leaf id<leafId>

<Management interface number><mgmtPort>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 217

S Commandsshow events leaf interface mgmt

show events leaf interface portchannelshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>

Description: Port channel interface

Syntax:

Leaf id<leafId>

<Port channel number><portChan>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)218

S Commandsshow events leaf interface portchannel

show events leaf interface tunnelshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>

Description: Tunnel Interface

Syntax:

Leaf id<leafId>

<Tunnel interface number><tunnelPort>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 219

S Commandsshow events leaf interface tunnel

show events leaf inventory chassisshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis

Description: Show inventory chassis information

Syntax:

Leaf id<leafId>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)220

S Commandsshow events leaf inventory chassis

show events leaf inventory fansshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>

Description: Show inventory fan information

Syntax:

Leaf id<leafId>

pls enter fan tray number<ftSlot>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 221

S Commandsshow events leaf inventory fans

show events leaf inventory moduleshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>

Description: Show inventory module information

Syntax:

Leaf id<leafId>

please enter the module number<lcSlot>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)222

S Commandsshow events leaf inventory module

show events leaf inventory module fabricportshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>

Description: Show information for fabric port

Syntax:

Leaf id<leafId>

please enter the module number<lcSlot>

pls enter the fabric port number<fabPort>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport<fabPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 223

S Commandsshow events leaf inventory module fabricport

show events leaf inventory module leafportshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport <leafPort>

Description: Show information for leaf port

Syntax:

Leaf id<leafId>

please enter the module number<lcSlot>

pls enter the leaf port number<leafPort>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport<leafPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)224

S Commandsshow events leaf inventory module leafport

show events leaf inventory powersupplyshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>

Description: Show inventory power supply information

Syntax:

Leaf id<leafId>

pls enter the powersupply number<psuSlot>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 225

S Commandsshow events leaf inventory powersupply

show events leaf inventory supervisorshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>

Description: Show information for supervisor module

Syntax:

Leaf id<leafId>

pls enter the supervisor module number<supMod>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)226

S Commandsshow events leaf inventory supervisor

show events leaf protocolshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>

Description: Show command for protocol

Syntax:

Leaf id<leafId>

Protocol name<protName>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 227

S Commandsshow events leaf protocol

show events leaf vpcshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>

Description: Virtual port channel information

Syntax:

Leaf id<leafId>

pls enter virtual port channel number<vpcPort>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)228

S Commandsshow events leaf vpc

show events leaf vrfshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>

Description: Vrf information

Syntax:

Leaf id<leafId>

pls enter vrf name<vrfPort>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 229

S Commandsshow events leaf vrf

show events spineshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>

Description: Show command for spine

Syntax:

Leaf id<leafId>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)230

S Commandsshow events spine

show events spine interface ethernetshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>

Description: Ethernet IEEE 802.3z

Syntax:

Leaf id<leafId>

<slot or chassis-number/port or slot number><phyInt>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 231

S Commandsshow events spine interface ethernet

show events spine interface l3instanceshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>

Description: L3 instance

Syntax:

Leaf id<leafId>

<L3 instance number><l3Inst>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)232

S Commandsshow events spine interface l3instance

show events spine interface mgmtshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>

Description:Management interface

Syntax:

Leaf id<leafId>

<Management interface number><mgmtPort>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 233

S Commandsshow events spine interface mgmt

show events spine interface tunnelshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>

Description: Tunnel Interface

Syntax:

Leaf id<leafId>

<Tunnel interface number><tunnelPort>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)234

S Commandsshow events spine interface tunnel

show events spine inventory chassisshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis

Description: Show inventory chassis information

Syntax:

Leaf id<leafId>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 235

S Commandsshow events spine inventory chassis

show events spine inventory fabricshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>

Description: Show information for fabric module

Syntax:

Leaf id<leafId>

pls enter the fabric module number<fcMod>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)236

S Commandsshow events spine inventory fabric

show events spine inventory fansshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>

Description: Show inventory fan information

Syntax:

Leaf id<leafId>

pls enter fan tray number<ftSlot>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 237

S Commandsshow events spine inventory fans

show events spine inventory moduleshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>

Description: Show inventory module information

Syntax:

Leaf id<leafId>

please enter the module number<lcSlot>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)238

S Commandsshow events spine inventory module

show events spine inventory module fabricportshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot> fabricport <fabPort>

Description: Show information for fabric port

Syntax:

Leaf id<leafId>

please enter the module number<lcSlot>

pls enter the fabric port number<fabPort>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>fabricport <fabPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 239

S Commandsshow events spine inventory module fabricport

show events spine inventory powersupplyshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>

Description: Show inventory power supply information

Syntax:

Leaf id<leafId>

pls enter the powersupply number<psuSlot>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)240

S Commandsshow events spine inventory powersupply

show events spine inventory supervisorshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>

Description: Show information for supervisor module

Syntax:

Leaf id<leafId>

pls enter the supervisor module number<supMod>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 241

S Commandsshow events spine inventory supervisor

show events spine inventory systemshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>

Description: Show information for system module

Syntax:

Leaf id<leafId>

pls enter the system module number<sysMod>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)242

S Commandsshow events spine inventory system

show events spine protocolshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>

Description: Show command for protocol

Syntax:

Leaf id<leafId>

Protocol name<protName>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 243

S Commandsshow events spine protocol

show events spine vrfshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>

Description: Vrf information

Syntax:

Leaf id<leafId>

pls enter vrf name<vrfPort>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)244

S Commandsshow events spine vrf

show events tenantshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD

Description: Show Tenants Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 245

S Commandsshow events tenant

show events tenant applicationshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD

Description: Show Application Profiles Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the application we eventually want to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)246

S Commandsshow events tenant application

show events tenant application epgshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD

Description: Show Application EPG Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the application we eventually want to filter on (Max Size 64)WORD

Name of the AEPG to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 247

S Commandsshow events tenant application epg

show events tenant bridge-domainshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the bridge-domain (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)248

S Commandsshow events tenant bridge-domain

show events tenant bridge-domain detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the bridge-domain (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 249

S Commandsshow events tenant bridge-domain detail

show events tenant endpointsshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]

Description: Show IP endpoints

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

(Optional) Endpoint Typetype

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) IP Unicast address in format i.i.i.iA.B.C.D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)250

S Commandsshow events tenant endpoints

show events tenant endpoints leaf interface ethernetshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceethernet ethernet [<fex>/]<slot>/<port>

Description: Show IP endpoints on an interface ethernet

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

(Optional) Endpoint Typetype

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) IP Unicast address in format i.i.i.iA.B.C.D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D

Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807

WORD

Ethernet Rangeethernet [<fex>/]<slot>/<port>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 251

S Commandsshow events tenant endpoints leaf interface ethernet

show events tenant endpoints leaf interface port-channelshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interfaceport-channel <WORD> [fex <NUMBER>]

Description: Show IP endpoints on an interface port-channel

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

(Optional) Endpoint Typetype

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) IP Unicast address in format i.i.i.iA.B.C.D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D

Leaf Number (Max Size 4000). Number range from=0to=9223372036854775807

WORD

Port Channel Name (Max Size 64)WORD

(Optional) Fex Id. Number range from=101 to=164<101-164>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6<A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)252

S Commandsshow events tenant endpoints leaf interface port-channel

show events tenant endpoints vpcshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD><WORD> interface vpc <WORD> [fex <fex>]

Description: Show IP endpoints on vpc

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

(Optional) Endpoint Typetype

(Optional) MAC address (Option 1) MAC address (Option 2) MACaddress (Option 3) MAC address (Option 4)

E.E.E EE-EE-EE-EE-EE-EEEE:EE:EE:EE:EE:EEEEEE.EEEE.EEEE

(Optional) Encapsulation Vlan. Number range from=1 to=4094<1-4094>

(Optional) IP Unicast address in format i.i.i.iA.B.C.D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xxA:B::C:D

VPC Contextcontext

First VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807

WORD

Second VPC leaf (Max Size 4000). Number range from=0to=9223372036854775807

WORD

VPC Interface nameinterface

VPC Interface namevpc

VPC Name (Max Size 64)WORD

(Optional) Fex Id. Number range from=101 to=164fex

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.EEE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 253

S Commandsshow events tenant endpoints vpc

<A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)254

S Commandsshow events tenant endpoints vpc

show events tenant interface bridge-domainshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the bridge-domain (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 255

S Commandsshow events tenant interface bridge-domain

show events tenant interface bridge-domain detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the bridge-domain (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)256

S Commandsshow events tenant interface bridge-domain detail

show events tenant multicast-route-mapsshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps

Description: Show multicast route-maps per Tenant

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 257

S Commandsshow events tenant multicast-route-maps

show events tenant vrfshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD

Description: Show VRF Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)258

S Commandsshow events tenant vrf

show events tenant vrf acllog l2show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER>srcintf <srcintf>

Description: L2 flow stats

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

permitDroppermitDrop

flowi statsflow

vlan infovlan

<vlan>. Number range from=0 to=9223372036854775807<vlan>

source interfacesrcintf

<srcintf><srcintf>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2flow vlan <NUMBER> srcintf <srcintf>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 259

S Commandsshow events tenant vrf acllog l2

show events tenant vrf acllog l3show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.Dor A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>

Description: L3 flow stats

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

permitDroppermitDrop

flow statsflow

source ipsrcip

IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D

destination ipdstip

IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D

protocolproto

<proto><proto>

source portsrcport

<srcport><srcport>

destination portdstport

<dstport><dstport>

source interfacesrcintf

<srcintf><srcintf>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)260

S Commandsshow events tenant vrf acllog l3

flow srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport>dstport <dstport> srcintf <srcintf>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 261

S Commandsshow events tenant vrf acllog l3

show events tenant vrf detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail

Description: Show detailed view of VRF

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)262

S Commandsshow events tenant vrf detail

show events tenant vrf external-l3 bgpshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp

Description: Show command for BGP peers

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 263

S Commandsshow events tenant vrf external-l3 bgp

show events tenant vrf external-l3 bgp nodeshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>

Description: node to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Leaf Range or Leaf Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node<101-4000>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)264

S Commandsshow events tenant vrf external-l3 bgp node

show events tenant vrf external-l3 eigrpshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp

Description: Show external l3 EIGRP

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 265

S Commandsshow events tenant vrf external-l3 eigrp

show events tenant vrf external-l3 eigrp detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail

Description: Show interanl details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)266

S Commandsshow events tenant vrf external-l3 eigrp detail

show events tenant vrf external-l3 epgshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>

Description: Show command for external-l3 epgs

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Name of the EPG to filter on<epgName>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 267

S Commandsshow events tenant vrf external-l3 epg

show events tenant vrf external-l3 epg detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Name of the EPG to filter on<epgName>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)268

S Commandsshow events tenant vrf external-l3 epg detail

show events tenant vrf external-l3 epg nameshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

Description: EPG name to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Name of the EPG to filter on<epgName>

Name of the EPG to filter on<epgName>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>name <epgName>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 269

S Commandsshow events tenant vrf external-l3 epg name

show events tenant vrf external-l3 epg name detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>detail

Description: external-l3 epg in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Name of the EPG to filter on<epgName>

Name of the EPG to filter on<epgName>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>name <epgName> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)270

S Commandsshow events tenant vrf external-l3 epg name detail

show events tenant vrf external-l3 interfacesshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces

Description: Show tenant <tenant> vrf <vrf> external l3 interfaces

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 271

S Commandsshow events tenant vrf external-l3 interfaces

show events tenant vrf external-l3 interfaces detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail

Description: Show interanl details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfacesdetail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)272

S Commandsshow events tenant vrf external-l3 interfaces detail

show events tenant vrf external-l3 ospfshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf

Description: Show command for IPv4 and IPv6 external l3 OSPF configuration

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 273

S Commandsshow events tenant vrf external-l3 ospf

show events tenant vrf external-l3 ospf detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail

Description: Show internal details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)274

S Commandsshow events tenant vrf external-l3 ospf detail

show events tenant vrf external-l3 route-mapshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name <l3out name>]

Description: Show command for external-l3 route-map

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

(Optional) Name of the route-map to filter on<l3out name>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name<l3out name>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 275

S Commandsshow events tenant vrf external-l3 route-map

show events tenant vrf external-l3 route-map detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name <l3out name>]detail

Description: Show external-l3 route-map in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

(Optional) Name of the route-map to filter on<l3out name>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name<l3out name>] detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)276

S Commandsshow events tenant vrf external-l3 route-map detail

show events tenant vrf external-l3 static-routeshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route

Description: Show command for external-l3 static routes

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 277

S Commandsshow events tenant vrf external-l3 static-route

show events tenant vrf external-l3 static-route detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail

Description: static-route in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-routedetail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)278

S Commandsshow events tenant vrf external-l3 static-route detail

show events tenant vrf external-l3 static-route nodeshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node

Description: node to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Leaf Range or Leaf Name Listarg

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-routenode

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 279

S Commandsshow events tenant vrf external-l3 static-route node

show events tenant vrf external-l3 static-route node detailshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail

Description: static-route in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Leaf Range or Leaf Name Listarg

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-routenode detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)280

S Commandsshow events tenant vrf external-l3 static-route node detail

show events tenant vrf multicastshow events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast

Description: Show multicast configuration per VRF

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes<NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 281

S Commandsshow events tenant vrf multicast

show external-l2 epgshow external-l2 epg

Description: Show command for external-l2 epgs

Command Mode: exec : Exec Mode

Command Path:

# show external-l2 epg

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)282

S Commandsshow external-l2 epg

show external-l2 epg nameshow external-l2 epg name WORD

Description: EPG name to filter on

Syntax:

Name of the EPG to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l2 epg name WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 283

S Commandsshow external-l2 epg name

show external-l2 epg tenantshow external-l2 epg tenant WORD

Description: tenant to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l2 epg tenant WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)284

S Commandsshow external-l2 epg tenant

show external-l3 bgpshow external-l3 bgp

Description: Show command for BGP peers

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 bgp

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 285

S Commandsshow external-l3 bgp

show external-l3 bgp tenantshow external-l3 bgp tenant <WORD>

Description: tenant to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 bgp tenant <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)286

S Commandsshow external-l3 bgp tenant

show external-l3 bgp tenant vrfshow external-l3 bgp tenant <WORD> vrf WORD

Description: vrf to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 bgp tenant <WORD> vrf WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 287

S Commandsshow external-l3 bgp tenant vrf

show external-l3 bgp tenant vrf nodeshow external-l3 bgp tenant <WORD> vrf WORD node <101-4000>

Description: node to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Leaf Range or Leaf Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 bgp tenant <WORD> vrf WORD node <101-4000>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)288

S Commandsshow external-l3 bgp tenant vrf node

show external-l3 eigrpshow external-l3 eigrp

Description: Show command for external-l3 eigrp

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 289

S Commandsshow external-l3 eigrp

show external-l3 eigrp detailshow external-l3 eigrp detail

Description: Show interanl details

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)290

S Commandsshow external-l3 eigrp detail

show external-l3 eigrp nodeshow external-l3 eigrp node <101-4000>

Description: Node(s) to filter on

Syntax:

Node Range or Node Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp node <101-4000>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 291

S Commandsshow external-l3 eigrp node

show external-l3 eigrp node detailshow external-l3 eigrp node <101-4000> detail

Description: Show interanl details

Syntax:

Node Range or Node Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp node <101-4000> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)292

S Commandsshow external-l3 eigrp node detail

show external-l3 eigrp tenantshow external-l3 eigrp tenant <WORD>

Description: Tenant(s) to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp tenant <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 293

S Commandsshow external-l3 eigrp tenant

show external-l3 eigrp tenant detailshow external-l3 eigrp tenant <WORD> detail

Description: Show interanl details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp tenant <WORD> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)294

S Commandsshow external-l3 eigrp tenant detail

show external-l3 eigrp tenant vrfshow external-l3 eigrp tenant <WORD> vrf WORD

Description: Vrf(s) to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF(s) to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp tenant <WORD> vrf WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 295

S Commandsshow external-l3 eigrp tenant vrf

show external-l3 eigrp tenant vrf detailshow external-l3 eigrp tenant <WORD> vrf WORD detail

Description: Show interanl details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF(s) to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp tenant <WORD> vrf WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)296

S Commandsshow external-l3 eigrp tenant vrf detail

show external-l3 eigrp tenant vrf nodeshow external-l3 eigrp tenant <WORD> vrf WORD node <101-4000>

Description: Node(s) to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF(s) to filter on (Max Size 64)WORD

Node Range or Node Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp tenant <WORD> vrf WORD node <101-4000>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 297

S Commandsshow external-l3 eigrp tenant vrf node

show external-l3 eigrp tenant vrf node detailshow external-l3 eigrp tenant <WORD> vrf WORD node <101-4000> detail

Description: Show interanl details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF(s) to filter on (Max Size 64)WORD

Node Range or Node Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp tenant <WORD> vrf WORD node <101-4000> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)298

S Commandsshow external-l3 eigrp tenant vrf node detail

show external-l3 epgshow external-l3 epg

Description: Show command for external-l3 epgs

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 299

S Commandsshow external-l3 epg

show external-l3 epg detailshow external-l3 epg detail

Description: external-l3 epg in detail with operational status

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)300

S Commandsshow external-l3 epg detail

show external-l3 epg nameshow external-l3 epg name <epgName>

Description: EPG name to filter on

Syntax:

Name of the EPG to filter on<epgName>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg name <epgName>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 301

S Commandsshow external-l3 epg name

show external-l3 epg name detailshow external-l3 epg name <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

Name of the EPG to filter on<epgName>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg name <epgName> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)302

S Commandsshow external-l3 epg name detail

show external-l3 epg tenantshow external-l3 epg tenant <WORD>

Description: tenant to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg tenant <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 303

S Commandsshow external-l3 epg tenant

show external-l3 epg tenant detailshow external-l3 epg tenant <WORD> detail

Description: external-l3 epg in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg tenant <WORD> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)304

S Commandsshow external-l3 epg tenant detail

show external-l3 epg tenant vrfshow external-l3 epg tenant <WORD> vrf WORD

Description: vrf to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg tenant <WORD> vrf WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 305

S Commandsshow external-l3 epg tenant vrf

show external-l3 epg tenant vrf detailshow external-l3 epg tenant <WORD> vrf WORD detail

Description: external-l3 epg in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg tenant <WORD> vrf WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)306

S Commandsshow external-l3 epg tenant vrf detail

show external-l3 interfacesshow external-l3 interfaces

Description: Show command for external-l3 interfaces

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 307

S Commandsshow external-l3 interfaces

show external-l3 interfaces detailshow external-l3 interfaces detail

Description: Show interanl details

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)308

S Commandsshow external-l3 interfaces detail

show external-l3 interfaces nodeshow external-l3 interfaces node <101-4000>

Description: Node(s) to filter on

Syntax:

Node Range or Node Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces node <101-4000>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 309

S Commandsshow external-l3 interfaces node

show external-l3 interfaces node detailshow external-l3 interfaces node <101-4000> detail

Description: Show interanl details

Syntax:

Node Range or Node Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces node <101-4000> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)310

S Commandsshow external-l3 interfaces node detail

show external-l3 interfaces tenantshow external-l3 interfaces tenant <WORD>

Description: Tenant(s) to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces tenant <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 311

S Commandsshow external-l3 interfaces tenant

show external-l3 interfaces tenant detailshow external-l3 interfaces tenant <WORD> detail

Description: Show interanl details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces tenant <WORD> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)312

S Commandsshow external-l3 interfaces tenant detail

show external-l3 interfaces tenant vrfshow external-l3 interfaces tenant <WORD> vrf WORD

Description: Vrf(s) to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF(s) to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces tenant <WORD> vrf WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 313

S Commandsshow external-l3 interfaces tenant vrf

show external-l3 interfaces tenant vrf detailshow external-l3 interfaces tenant <WORD> vrf WORD detail

Description: Show interanl details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF(s) to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces tenant <WORD> vrf WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)314

S Commandsshow external-l3 interfaces tenant vrf detail

show external-l3 interfaces tenant vrf nodeshow external-l3 interfaces tenant <WORD> vrf WORD node <101-4000>

Description: Node(s) to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF(s) to filter on (Max Size 64)WORD

Node Range or Node Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces tenant <WORD> vrf WORD node <101-4000>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 315

S Commandsshow external-l3 interfaces tenant vrf node

show external-l3 interfaces tenant vrf node detailshow external-l3 interfaces tenant <WORD> vrf WORD node <101-4000> detail

Description: Show interanl details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF(s) to filter on (Max Size 64)WORD

Node Range or Node Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces tenant <WORD> vrf WORD node <101-4000> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)316

S Commandsshow external-l3 interfaces tenant vrf node detail

show external-l3 ospfshow external-l3 ospf

Description: Show command for external-l3 ospf

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 317

S Commandsshow external-l3 ospf

show external-l3 ospf detailshow external-l3 ospf detail

Description: Show internal details

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)318

S Commandsshow external-l3 ospf detail

show external-l3 ospf nodeshow external-l3 ospf node <101-4000>

Description: Node(s) to filter on

Syntax:

Node Range or Node Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf node <101-4000>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 319

S Commandsshow external-l3 ospf node

show external-l3 ospf node detailshow external-l3 ospf node <101-4000> detail

Description: Show internal details

Syntax:

Node Range or Node Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf node <101-4000> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)320

S Commandsshow external-l3 ospf node detail

show external-l3 ospf tenantshow external-l3 ospf tenant <WORD>

Description: Tenant(s) to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf tenant <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 321

S Commandsshow external-l3 ospf tenant

show external-l3 ospf tenant detailshow external-l3 ospf tenant <WORD> detail

Description: Show internal details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf tenant <WORD> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)322

S Commandsshow external-l3 ospf tenant detail

show external-l3 ospf tenant vrfshow external-l3 ospf tenant <WORD> vrf WORD

Description: Vrf(s) to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF(s) to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf tenant <WORD> vrf WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 323

S Commandsshow external-l3 ospf tenant vrf

show external-l3 ospf tenant vrf detailshow external-l3 ospf tenant <WORD> vrf WORD detail

Description: Show internal details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF(s) to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf tenant <WORD> vrf WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)324

S Commandsshow external-l3 ospf tenant vrf detail

show external-l3 ospf tenant vrf nodeshow external-l3 ospf tenant <WORD> vrf WORD node <101-4000>

Description: Node(s) to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF(s) to filter on (Max Size 64)WORD

Node Range or Node Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf tenant <WORD> vrf WORD node <101-4000>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 325

S Commandsshow external-l3 ospf tenant vrf node

show external-l3 ospf tenant vrf node detailshow external-l3 ospf tenant <WORD> vrf WORD node <101-4000> detail

Description: Show internal details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF(s) to filter on (Max Size 64)WORD

Node Range or Node Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf tenant <WORD> vrf WORD node <101-4000> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)326

S Commandsshow external-l3 ospf tenant vrf node detail

show external-l3 route-mapshow external-l3 route-map

Description: Show command for external-l3 route-map

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 327

S Commandsshow external-l3 route-map

show external-l3 route-map detailshow external-l3 route-map detail

Description: Route-map in detail with operational status

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)328

S Commandsshow external-l3 route-map detail

show external-l3 route-map nameshow external-l3 route-map name <l3out name>

Description: Route-map name to filter on

Syntax:

Name of the route-map to filter on<l3out name>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map name <l3out name>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 329

S Commandsshow external-l3 route-map name

show external-l3 route-map name detailshow external-l3 route-map name <l3out name> detail

Description: Route-map in detail with operational status

Syntax:

Name of the route-map to filter on<l3out name>

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map name <l3out name> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)330

S Commandsshow external-l3 route-map name detail

show external-l3 route-map tenantshow external-l3 route-map tenant <WORD>

Description: tenant to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map tenant <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 331

S Commandsshow external-l3 route-map tenant

show external-l3 route-map tenant detailshow external-l3 route-map tenant <WORD> detail

Description: Route-map in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map tenant <WORD> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)332

S Commandsshow external-l3 route-map tenant detail

show external-l3 route-map tenant vrfshow external-l3 route-map tenant <WORD> vrf WORD

Description: vrf to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map tenant <WORD> vrf WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 333

S Commandsshow external-l3 route-map tenant vrf

show external-l3 route-map tenant vrf detailshow external-l3 route-map tenant <WORD> vrf WORD detail

Description: Route-map in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map tenant <WORD> vrf WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)334

S Commandsshow external-l3 route-map tenant vrf detail

show external-l3 route-map tenant vrf nodeshow external-l3 route-map tenant <WORD> vrf WORD node

Description: node to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Leaf Range or Leaf Name Listarg

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map tenant <WORD> vrf WORD node

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 335

S Commandsshow external-l3 route-map tenant vrf node

show external-l3 route-map tenant vrf node detailshow external-l3 route-map tenant <WORD> vrf WORD node detail

Description: Route-map in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Leaf Range or Leaf Name Listarg

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map tenant <WORD> vrf WORD node detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)336

S Commandsshow external-l3 route-map tenant vrf node detail

show external-l3 static-routeshow external-l3 static-route

Description: Show command for external-l3 static routes

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 337

S Commandsshow external-l3 static-route

show external-l3 static-route detailshow external-l3 static-route detail

Description: static-route in detail with operational status

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)338

S Commandsshow external-l3 static-route detail

show external-l3 static-route nodeshow external-l3 static-route node

Description: node to filter on

Syntax:

Leaf Range or Leaf Name Listarg

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route node

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 339

S Commandsshow external-l3 static-route node

show external-l3 static-route node detailshow external-l3 static-route node detail

Description: static-route in detail with operational status

Syntax:

Leaf Range or Leaf Name Listarg

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route node detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)340

S Commandsshow external-l3 static-route node detail

show external-l3 static-route tenantshow external-l3 static-route tenant <WORD>

Description: tenant to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route tenant <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 341

S Commandsshow external-l3 static-route tenant

show external-l3 static-route tenant detailshow external-l3 static-route tenant <WORD> detail

Description: static-route in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route tenant <WORD> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)342

S Commandsshow external-l3 static-route tenant detail

show external-l3 static-route tenant vrfshow external-l3 static-route tenant <WORD> vrf WORD

Description: vrf to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route tenant <WORD> vrf WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 343

S Commandsshow external-l3 static-route tenant vrf

show external-l3 static-route tenant vrf detailshow external-l3 static-route tenant <WORD> vrf WORD detail

Description: static-route in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route tenant <WORD> vrf WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)344

S Commandsshow external-l3 static-route tenant vrf detail

show external-l3 static-route tenant vrf nodeshow external-l3 static-route tenant <WORD> vrf WORD node

Description: node to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Leaf Range or Leaf Name Listarg

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route tenant <WORD> vrf WORD node

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 345

S Commandsshow external-l3 static-route tenant vrf node

show external-l3 static-route tenant vrf node detailshow external-l3 static-route tenant <WORD> vrf WORD node detail

Description: static-route in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Leaf Range or Leaf Name Listarg

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route tenant <WORD> vrf WORD node detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)346

S Commandsshow external-l3 static-route tenant vrf node detail

show fabric-recovery statusshow fabric-recovery status

Description: Show fabric recovery status

Command Mode: exec : Exec Mode

Command Path:

# show fabric-recovery status

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 347

S Commandsshow fabric-recovery status

show faultsshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes/no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

Description: Show fault information

Syntax:

(Optional) Historical informationhistory

(Optional) Fault code<fault-code>

(Optional) Fault ID<fault-ID>

(Optional) Acknowledgment status<yes/no>

(Optional) Lifecycle state<lc-state>

(Optional) Severity<severity-value>

(Optional) Minimum severity<severity-value>

(Optional) Type<fault-type>

(Optional) Cause<fault-value>

(Optional) Fault activity in time interval. Number range from=1 to=59last-minutes <num-minutes>

(Optional) Fault activity in time interval. Number range from=1 to=23last-hours <num-hours>

(Optional) Fault activity in time interval. Number range from=1 to=999last-days <num-days>

(Optional) Fault activity in time intervalstart-time<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Fault activity in time intervalend-time<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Detailed faults informationdetail

command scope<scope>

Command Mode: exec : Exec Mode

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)348

S Commandsshow faults

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes/no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-timestart-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail]<scope>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 349

S Commandsshow faults

show faults controllershow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] controller

Description: Show controller information

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)350

S Commandsshow faults controller

show faults controller detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]

Description: Detailed controller information

Syntax:

(Optional) Optional Serial numbernode-id

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id<node-id>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 351

S Commandsshow faults controller detail

show faults l4l7-clustershow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]

Description: Show L4 L7 Device information

Syntax:

(Optional) Name of TenantTenant Name

(Optional) Name of DeviceDevice Cluster Name

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-cluster [tenant<Tenant Name>] [cluster <Device Cluster Name>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)352

S Commandsshow faults l4l7-cluster

show faults l4l7-graphshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]

Description: Show L4 L7 Graph information

Syntax:

(Optional) Name of Tenant<Tenant Name>

(Optional) Name of Graph<Graph Name>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-graph [tenant<Tenant Name>] [graph <Graph Name>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 353

S Commandsshow faults l4l7-graph

show faults leafshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>

Description: Show command for leaf

Syntax:

Leaf id<leafId>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)354

S Commandsshow faults leaf

show faults leaf fexshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>

Description: Show extended chassis information

Syntax:

Leaf id<leafId>

pls enter fex number<fexNum>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex<fexNum>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 355

S Commandsshow faults leaf fex

show faults leaf fex moduleshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>

Description: Show inventory module information

Syntax:

Leaf id<leafId>

pls enter fex number<fexNum>

please enter the module number<lcSlot>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex<fexNum> module <lcSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)356

S Commandsshow faults leaf fex module

show faults leaf interface ethernetshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>

Description: Ethernet IEEE 802.3z

Syntax:

Leaf id<leafId>

<slot or chassis-number/port or slot number><phyInt>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfaceethernet <phyInt>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 357

S Commandsshow faults leaf interface ethernet

show faults leaf interface l3instanceshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>

Description: L3 instance

Syntax:

Leaf id<leafId>

<L3 instance number><l3Inst>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfacel3instance <l3Inst>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)358

S Commandsshow faults leaf interface l3instance

show faults leaf interface mgmtshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>

Description:Management interface

Syntax:

Leaf id<leafId>

<Management interface number><mgmtPort>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfacemgmt <mgmtPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 359

S Commandsshow faults leaf interface mgmt

show faults leaf interface portchannelshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>

Description: Port channel interface

Syntax:

Leaf id<leafId>

<Port channel number><portChan>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfaceportchannel <portChan>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)360

S Commandsshow faults leaf interface portchannel

show faults leaf interface tunnelshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>

Description: Tunnel Interface

Syntax:

Leaf id<leafId>

<Tunnel interface number><tunnelPort>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interfacetunnel <tunnelPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 361

S Commandsshow faults leaf interface tunnel

show faults leaf inventory chassisshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis

Description: Show inventory chassis information

Syntax:

Leaf id<leafId>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorychassis

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)362

S Commandsshow faults leaf inventory chassis

show faults leaf inventory fansshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>

Description: Show inventory fan information

Syntax:

Leaf id<leafId>

pls enter fan tray number<ftSlot>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventoryfans <ftSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 363

S Commandsshow faults leaf inventory fans

show faults leaf inventory moduleshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>

Description: Show inventory module information

Syntax:

Leaf id<leafId>

please enter the module number<lcSlot>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorymodule <lcSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)364

S Commandsshow faults leaf inventory module

show faults leaf inventory module fabricportshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>

Description: Show information for fabric port

Syntax:

Leaf id<leafId>

please enter the module number<lcSlot>

pls enter the fabric port number<fabPort>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorymodule <lcSlot> fabricport <fabPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 365

S Commandsshow faults leaf inventory module fabricport

show faults leaf inventory module leafportshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport <leafPort>

Description: Show information for leaf port

Syntax:

Leaf id<leafId>

please enter the module number<lcSlot>

pls enter the leaf port number<leafPort>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorymodule <lcSlot> leafport <leafPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)366

S Commandsshow faults leaf inventory module leafport

show faults leaf inventory powersupplyshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>

Description: Show inventory power supply information

Syntax:

Leaf id<leafId>

pls enter the powersupply number<psuSlot>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorypowersupply <psuSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 367

S Commandsshow faults leaf inventory powersupply

show faults leaf inventory supervisorshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>

Description: Show information for supervisor module

Syntax:

Leaf id<leafId>

pls enter the supervisor module number<supMod>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventorysupervisor <supMod>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)368

S Commandsshow faults leaf inventory supervisor

show faults leaf protocolshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>

Description: Show command for protocol

Syntax:

Leaf id<leafId>

Protocol name<protName>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol<protName>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 369

S Commandsshow faults leaf protocol

show faults leaf vpcshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>

Description: Virtual port channel information

Syntax:

Leaf id<leafId>

pls enter virtual port channel number<vpcPort>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc<vpcPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)370

S Commandsshow faults leaf vpc

show faults leaf vrfshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>

Description: Vrf information

Syntax:

Leaf id<leafId>

pls enter vrf name<vrfPort>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf<vrfPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 371

S Commandsshow faults leaf vrf

show faults microsoft domainshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain

Description: Show Microsoft domain information

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)372

S Commandsshow faults microsoft domain

show faults microsoft domain nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD>

Description:Microsoft domain name

Syntax:

Microsoft domain nameWORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 373

S Commandsshow faults microsoft domain name

show faults microsoft domain name hypervshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> hyperv <WORD>

Description: Show Microsoft Hypervisor information

Syntax:

Microsoft domain nameWORD

HyperV hostnameWORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> hyperv <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)374

S Commandsshow faults microsoft domain name hyperv

show faults microsoft domain name port-groupshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> port-group

Description: Show Microsoft port group information

Syntax:

Microsoft domain nameWORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> port-group

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 375

S Commandsshow faults microsoft domain name port-group

show faults microsoft domain name scvmmshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> scvmm <hostname|ip>

Description: Show Microsoft SCVMM information

Syntax:

Microsoft domain nameWORD

SCVMM hostname or IP<hostname|ip>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> scvmm <hostname|ip>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)376

S Commandsshow faults microsoft domain name scvmm

show faults microsoft domain name vmshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> vm

Description: Show Microsoft VM information

Syntax:

Microsoft domain nameWORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> vm

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 377

S Commandsshow faults microsoft domain name vm

show faults microsoft domain name vm nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> vm name <WORD>

Description: Show detailed Microsoft VM information

Syntax:

Microsoft domain nameWORD

VM NameWORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name<WORD> vm name <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)378

S Commandsshow faults microsoft domain name vm name

show faults spineshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>

Description: Show command for spine

Syntax:

Leaf id<leafId>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 379

S Commandsshow faults spine

show faults spine interface ethernetshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>

Description: Ethernet IEEE 802.3z

Syntax:

Leaf id<leafId>

<slot or chassis-number/port or slot number><phyInt>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interfaceethernet <phyInt>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)380

S Commandsshow faults spine interface ethernet

show faults spine interface l3instanceshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>

Description: L3 instance

Syntax:

Leaf id<leafId>

<L3 instance number><l3Inst>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interfacel3instance <l3Inst>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 381

S Commandsshow faults spine interface l3instance

show faults spine interface mgmtshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>

Description:Management interface

Syntax:

Leaf id<leafId>

<Management interface number><mgmtPort>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interfacemgmt <mgmtPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)382

S Commandsshow faults spine interface mgmt

show faults spine interface tunnelshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>

Description: Tunnel Interface

Syntax:

Leaf id<leafId>

<Tunnel interface number><tunnelPort>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interfacetunnel <tunnelPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 383

S Commandsshow faults spine interface tunnel

show faults spine inventory chassisshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis

Description: Show inventory chassis information

Syntax:

Leaf id<leafId>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorychassis

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)384

S Commandsshow faults spine inventory chassis

show faults spine inventory fabricshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>

Description: Show information for fabric module

Syntax:

Leaf id<leafId>

pls enter the fabric module number<fcMod>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventoryfabric <fcMod>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 385

S Commandsshow faults spine inventory fabric

show faults spine inventory fansshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>

Description: Show inventory fan information

Syntax:

Leaf id<leafId>

pls enter fan tray number<ftSlot>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventoryfans <ftSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)386

S Commandsshow faults spine inventory fans

show faults spine inventory moduleshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>

Description: Show inventory module information

Syntax:

Leaf id<leafId>

please enter the module number<lcSlot>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorymodule <lcSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 387

S Commandsshow faults spine inventory module

show faults spine inventory module fabricportshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot> fabricport <fabPort>

Description: Show information for fabric port

Syntax:

Leaf id<leafId>

please enter the module number<lcSlot>

pls enter the fabric port number<fabPort>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorymodule <lcSlot> fabricport <fabPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)388

S Commandsshow faults spine inventory module fabricport

show faults spine inventory powersupplyshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>

Description: Show inventory power supply information

Syntax:

Leaf id<leafId>

pls enter the powersupply number<psuSlot>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorypowersupply <psuSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 389

S Commandsshow faults spine inventory powersupply

show faults spine inventory supervisorshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>

Description: Show information for supervisor module

Syntax:

Leaf id<leafId>

pls enter the supervisor module number<supMod>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorysupervisor <supMod>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)390

S Commandsshow faults spine inventory supervisor

show faults spine inventory systemshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>

Description: Show information for system module

Syntax:

Leaf id<leafId>

pls enter the system module number<sysMod>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventorysystem <sysMod>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 391

S Commandsshow faults spine inventory system

show faults spine protocolshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>

Description: Show command for protocol

Syntax:

Leaf id<leafId>

Protocol name<protName>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol<protName>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)392

S Commandsshow faults spine protocol

show faults spine vrfshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>

Description: Vrf information

Syntax:

Leaf id<leafId>

pls enter vrf name<vrfPort>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf<vrfPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 393

S Commandsshow faults spine vrf

show faults tenantshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD

Description: Show Tenants Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)394

S Commandsshow faults tenant

show faults tenant applicationshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD

Description: Show Application Profiles Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the application we eventually want to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD applicationWORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 395

S Commandsshow faults tenant application

show faults tenant application epgshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD

Description: Show Application EPG Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the application we eventually want to filter on (Max Size 64)WORD

Name of the AEPG to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD applicationWORD epg WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)396

S Commandsshow faults tenant application epg

show faults tenant bridge-domainshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the bridge-domain (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORDbridge-domain WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 397

S Commandsshow faults tenant bridge-domain

show faults tenant bridge-domain detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the bridge-domain (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORDbridge-domain WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)398

S Commandsshow faults tenant bridge-domain detail

show faults tenant interface bridge-domainshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the bridge-domain (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interfacebridge-domain WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 399

S Commandsshow faults tenant interface bridge-domain

show faults tenant interface bridge-domain detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the bridge-domain (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interfacebridge-domain WORD detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)400

S Commandsshow faults tenant interface bridge-domain detail

show faults tenant multicast-route-mapsshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD multicast-route-maps

Description: Show multicast route-maps per Tenant

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORDmulticast-route-maps

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 401

S Commandsshow faults tenant multicast-route-maps

show faults tenant vrfshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD

Description: Show VRF Information

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)402

S Commandsshow faults tenant vrf

show faults tenant vrf acllog l2show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l2 flow vlan <NUMBER>srcintf <srcintf>

Description: L2 flow stats

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

permitDroppermitDrop

flowi statsflow

vlan infovlan

<vlan>. Number range from=0 to=9223372036854775807<vlan>

source interfacesrcintf

<srcintf><srcintf>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDacllog <permitDrop> l2 flow vlan <NUMBER> srcintf <srcintf>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 403

S Commandsshow faults tenant vrf acllog l2

show faults tenant vrf acllog l3show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD acllog <permitDrop> l3 flow srcip <A.B.C.Dor A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto <proto> srcport <srcport> dstport <dstport> srcintf <srcintf>

Description: L3 flow stats

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

permitDroppermitDrop

flow statsflow

source ipsrcip

IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D

destination ipdstip

IP address in format i.i.i.i or IPv6 address in format xxxx:xxxx, xxxx::xxA.B.C.D or A:B::C:D

protocolproto

<proto><proto>

source portsrcport

<srcport><srcport>

destination portdstport

<dstport><dstport>

source interfacesrcintf

<srcintf><srcintf>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)404

S Commandsshow faults tenant vrf acllog l3

[severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDacllog <permitDrop> l3 flow srcip <A.B.C.D or A:B::C:D> dstip <A.B.C.D or A:B::C:D> proto<proto> srcport <srcport> dstport <dstport> srcintf <srcintf>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 405

S Commandsshow faults tenant vrf acllog l3

show faults tenant vrf detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail

Description: Show detailed view of VRF

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDdetail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)406

S Commandsshow faults tenant vrf detail

show faults tenant vrf external-l3 bgpshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp

Description: Show command for BGP peers

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 bgp

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 407

S Commandsshow faults tenant vrf external-l3 bgp

show faults tenant vrf external-l3 bgp nodeshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>

Description: node to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Leaf Range or Leaf Name List<101-4000>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 bgp node <101-4000>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)408

S Commandsshow faults tenant vrf external-l3 bgp node

show faults tenant vrf external-l3 eigrpshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp

Description: Show external l3 EIGRP

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 eigrp

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 409

S Commandsshow faults tenant vrf external-l3 eigrp

show faults tenant vrf external-l3 eigrp detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail

Description: Show interanl details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 eigrp detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)410

S Commandsshow faults tenant vrf external-l3 eigrp detail

show faults tenant vrf external-l3 epgshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>

Description: Show command for external-l3 epgs

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Name of the EPG to filter on<epgName>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 epg <epgName>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 411

S Commandsshow faults tenant vrf external-l3 epg

show faults tenant vrf external-l3 epg detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Name of the EPG to filter on<epgName>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 epg <epgName> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)412

S Commandsshow faults tenant vrf external-l3 epg detail

show faults tenant vrf external-l3 epg nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

Description: EPG name to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Name of the EPG to filter on<epgName>

Name of the EPG to filter on<epgName>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 epg <epgName> name <epgName>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 413

S Commandsshow faults tenant vrf external-l3 epg name

show faults tenant vrf external-l3 epg name detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>detail

Description: external-l3 epg in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Name of the EPG to filter on<epgName>

Name of the EPG to filter on<epgName>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 epg <epgName> name <epgName> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)414

S Commandsshow faults tenant vrf external-l3 epg name detail

show faults tenant vrf external-l3 interfacesshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces

Description: Show tenant <tenant> vrf <vrf> external l3 interfaces

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 interfaces

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 415

S Commandsshow faults tenant vrf external-l3 interfaces

show faults tenant vrf external-l3 interfaces detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail

Description: Show interanl details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 interfaces detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)416

S Commandsshow faults tenant vrf external-l3 interfaces detail

show faults tenant vrf external-l3 ospfshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf

Description: Show command for IPv4 and IPv6 external l3 OSPF configuration

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 ospf

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 417

S Commandsshow faults tenant vrf external-l3 ospf

show faults tenant vrf external-l3 ospf detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail

Description: Show internal details

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 ospf detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)418

S Commandsshow faults tenant vrf external-l3 ospf detail

show faults tenant vrf external-l3 static-routeshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route

Description: Show command for external-l3 static routes

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 static-route

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 419

S Commandsshow faults tenant vrf external-l3 static-route

show faults tenant vrf external-l3 static-route detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail

Description: static-route in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 static-route detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)420

S Commandsshow faults tenant vrf external-l3 static-route detail

show faults tenant vrf external-l3 static-route nodeshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node

Description: node to filter on

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Leaf Range or Leaf Name Listarg

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 static-route node

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 421

S Commandsshow faults tenant vrf external-l3 static-route node

show faults tenant vrf external-l3 static-route node detailshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail

Description: static-route in detail with operational status

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Leaf Range or Leaf Name Listarg

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDexternal-l3 static-route node detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)422

S Commandsshow faults tenant vrf external-l3 static-route node detail

show faults tenant vrf multicastshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD multicast

Description: Show multicast configuration per VRF

Syntax:

Name of the tenant to filter on (Max Size 63)WORD

Name of the VRF to filter on (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORDmulticast

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 423

S Commandsshow faults tenant vrf multicast

show faults vmware domainshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain

Description: Show VMware domain information

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)424

S Commandsshow faults vmware domain

show faults vmware domain nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name>

Description: VMware domain name

Syntax:

VMware domain name<name>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 425

S Commandsshow faults vmware domain name

show faults vmware domain name epgshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> epg

Description: Show VMware domain EPG details

Syntax:

VMware domain name<name>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> epg

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)426

S Commandsshow faults vmware domain name epg

show faults vmware domain name esxshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> esx <esx-ip>

Description: Show VMware ESX information

Syntax:

VMware domain name<name>

ESX IP<esx-ip>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> esx <esx-ip>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 427

S Commandsshow faults vmware domain name esx

show faults vmware domain name port-groupshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> port-group

Description: Show VMware port group information

Syntax:

VMware domain name<name>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> port-group

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)428

S Commandsshow faults vmware domain name port-group

show faults vmware domain name trunk-portgroupshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> trunk-portgroup [name <name>]

Description: Show VMware domain trunk portgroup details

Syntax:

VMware domain name<name>

(Optional) trunk portgroup name<name>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> trunk-portgroup [name <name>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 429

S Commandsshow faults vmware domain name trunk-portgroup

show faults vmware domain name vcentershow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vcenter <hostname|ip>

Description: VMware vCenter ip or hostname

Syntax:

VMware domain name<name>

vCenter hostname or IP<hostname|ip>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> vcenter <hostname|ip>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)430

S Commandsshow faults vmware domain name vcenter

show faults vmware domain name vmshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vm

Description: Show VMware VM information

Syntax:

VMware domain name<name>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> vm

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 431

S Commandsshow faults vmware domain name vm

show faults vmware domain name vm nameshow faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>][min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours<NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time<YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vm name <vm-name>

Description: Show detailed VMware VM information

Syntax:

VMware domain name<name>

VM Name<vm-name>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>][severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause<fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name<name> vm name <vm-name>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)432

S Commandsshow faults vmware domain name vm name

show fipsshow fips <status>

Description: Show FIPS information

Syntax:

Show FIPS informationstatus

Command Mode: exec : Exec Mode

Command Path:

# show fips <status>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 433

S Commandsshow fips

show firmware repositoryshow firmware repository

Description: Show firmware images present in repository

Command Mode: exec : Exec Mode

Command Path:

# show firmware repository

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)434

S Commandsshow firmware repository

show firmware repository detailshow firmware repository detail

Description: Detailed repository information

Command Mode: exec : Exec Mode

Command Path:

# show firmware repository detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 435

S Commandsshow firmware repository detail

show firmware upgrade statusshow firmware upgrade status

Description: Upgrade status of all controllers and switches

Command Mode: exec : Exec Mode

Command Path:

# show firmware upgrade status

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)436

S Commandsshow firmware upgrade status

show firmware upgrade status controller-groupshow firmware upgrade status controller-group

Description: Controller-group upgrade status

Command Mode: exec : Exec Mode

Command Path:

# show firmware upgrade status controller-group

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 437

S Commandsshow firmware upgrade status controller-group

show firmware upgrade status controller-group detailshow firmware upgrade status controller-group detail

Description: Detailed upgrade status

Command Mode: exec : Exec Mode

Command Path:

# show firmware upgrade status controller-group detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)438

S Commandsshow firmware upgrade status controller-group detail

show firmware upgrade status detailshow firmware upgrade status detail

Description: Detailed upgrade status information

Command Mode: exec : Exec Mode

Command Path:

# show firmware upgrade status detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 439

S Commandsshow firmware upgrade status detail

show firmware upgrade status switch-groupshow firmware upgrade status switch-group <WORD>

Description: Switch-group upgrade status

Syntax:

switch-group name (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show firmware upgrade status switch-group <WORD>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)440

S Commandsshow firmware upgrade status switch-group

show firmware upgrade status switch-group detailshow firmware upgrade status switch-group <WORD> detail

Description: Detailed upgrade status

Syntax:

switch-group name (Max Size 64)WORD

Command Mode: exec : Exec Mode

Command Path:

# show firmware upgrade status switch-group <WORD> detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 441

S Commandsshow firmware upgrade status switch-group detail

show flow exportershow flow exporter

Description: Show Netflow exporter information

Command Mode: exec : Exec Mode

Command Path:

# show flow exporter

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)442

S Commandsshow flow exporter

show flow exporter infrashow flow exporter infra WORD [detail]

Description: Show flow exporter infra information

Syntax:

Exporter NameWORD

(Optional) detaildetail

Command Mode: exec : Exec Mode

Command Path:

# show flow exporter infra WORD [detail]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 443

S Commandsshow flow exporter infra

show flow exporter tenantshow flow exporter tenant <WORD> WORD [detail]

Description: Show flow exporter tenant information

Syntax:

Optional tenant nameWORD

Exporter NameWORD

(Optional) detaildetail

Command Mode: exec : Exec Mode

Command Path:

# show flow exporter tenant <WORD> WORD [detail]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)444

S Commandsshow flow exporter tenant

show flow monitorshow flow monitor

Description: Show Netflow Monitor Information

Command Mode: exec : Exec Mode

Command Path:

# show flow monitor

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 445

S Commandsshow flow monitor

show flow monitor infrashow flow monitor infra WORD [detail]

Description: Show Netflow Monitor Information for infra

Syntax:

Optional Monitor NameWORD

(Optional) detaildetail

Command Mode: exec : Exec Mode

Command Path:

# show flow monitor infra WORD [detail]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)446

S Commandsshow flow monitor infra

show flow monitor tenantshow flow monitor tenant <WORD> WORD [detail]

Description: Show Netflow Monitor Information for the specified tenant

Syntax:

Specify tenant nameWORD

Optional Monitor NameWORD

(Optional) detaildetail

Command Mode: exec : Exec Mode

Command Path:

# show flow monitor tenant <WORD> WORD [detail]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 447

S Commandsshow flow monitor tenant

show flow node-policyshow flow node-policy [name <WORD>]

Description: Show Netflow Node Policy Information

Syntax:

(Optional) Optional Node Policy NameWORD

Command Mode: exec : Exec Mode

Command Path:

# show flow node-policy [name <WORD>]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)448

S Commandsshow flow node-policy

show flow node-policy detailshow flow node-policy [name <WORD>] detail

Description: Show Netflow Node Policy Detailed Information

Syntax:

(Optional) Optional Node Policy NameWORD

Command Mode: exec : Exec Mode

Command Path:

# show flow node-policy [name <WORD>] detail

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 449

S Commandsshow flow node-policy detail

show flow recordshow flow record

Description: Show Netflow record information

Command Mode: exec : Exec Mode

Command Path:

# show flow record

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)450

S Commandsshow flow record

show flow record infrashow flow record infra WORD [detail]

Description: Show flow record infra information

Syntax:

Record NameWORD

(Optional) detaildetail

Command Mode: exec : Exec Mode

Command Path:

# show flow record infra WORD [detail]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 451

S Commandsshow flow record infra

show flow record tenantshow flow record tenant [record-name <recordName>] <tenantName> WORD [detail]

Description: Show flow record tenant information

Syntax:

(Optional) Optional record namerecordName

Optional tenant nametenantName

Record NameWORD

(Optional) detaildetail

Command Mode: exec : Exec Mode

Command Path:

# show flow record tenant [record-name <recordName>] <tenantName> WORD [detail]

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)452

S Commandsshow flow record tenant

show flow vm-exportershow flow vm-exporter WORD

Description: Show NetFlow Exporter information for VM Networking

Syntax:

NetFlow Exporter NameWORD

Command Mode: exec : Exec Mode

Command Path:

# show flow vm-exporter WORD

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 453

S Commandsshow flow vm-exporter

show healthshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] <scope>

Description: Show health score information

Syntax:

(Optional) Historical informationhistory

(Optional) Minimum change in health score percentage. Number rangefrom=-100 to=9999

min-change <percentage change>

(Optional) Maximum health score. Number range from=0 to=100max-hs <maximum health-score>

(Optional) Health activity in time intervalstart-time<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Health activity in time intervalend-time<YYYY-MM-DDTHR:MIN:SEC>

command scope<scope>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] <scope>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)454

S Commandsshow health

show health leafshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId>

Description: Show command for leaf

Syntax:

Leaf id<leafId>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 455

S Commandsshow health leaf

show health leaf fexshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum>

Description: Show extended chassis information

Syntax:

Leaf id<leafId>

pls enter fex number<fexNum>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)456

S Commandsshow health leaf fex

show health leaf fex moduleshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum> module <lcSlot>

Description: Show inventory module information

Syntax:

Leaf id<leafId>

pls enter fex number<fexNum>

please enter the module number<lcSlot>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum>module <lcSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 457

S Commandsshow health leaf fex module

show health leaf interface ethernetshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface ethernet <phyInt>

Description: Ethernet IEEE 802.3z

Syntax:

Leaf id<leafId>

<slot or chassis-number/port or slot number><phyInt>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface ethernet<phyInt>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)458

S Commandsshow health leaf interface ethernet

show health leaf interface l3instanceshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface l3instance <l3Inst>

Description: L3 instance

Syntax:

Leaf id<leafId>

<L3 instance number><l3Inst>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface l3instance<l3Inst>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 459

S Commandsshow health leaf interface l3instance

show health leaf interface mgmtshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface mgmt <mgmtPort>

Description:Management interface

Syntax:

Leaf id<leafId>

<Management interface number><mgmtPort>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface mgmt<mgmtPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)460

S Commandsshow health leaf interface mgmt

show health leaf interface portchannelshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface portchannel <portChan>

Description: Port channel interface

Syntax:

Leaf id<leafId>

<Port channel number><portChan>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interfaceportchannel <portChan>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 461

S Commandsshow health leaf interface portchannel

show health leaf interface tunnelshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface tunnel <tunnelPort>

Description: Tunnel Interface

Syntax:

Leaf id<leafId>

<Tunnel interface number><tunnelPort>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface tunnel<tunnelPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)462

S Commandsshow health leaf interface tunnel

show health leaf inventory chassisshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory chassis

Description: Show inventory chassis information

Syntax:

Leaf id<leafId>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory chassis

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 463

S Commandsshow health leaf inventory chassis

show health leaf inventory fansshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory fans <ftSlot>

Description: Show inventory fan information

Syntax:

Leaf id<leafId>

pls enter fan tray number<ftSlot>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory fans<ftSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)464

S Commandsshow health leaf inventory fans

show health leaf inventory moduleshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot>

Description: Show inventory module information

Syntax:

Leaf id<leafId>

please enter the module number<lcSlot>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module<lcSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 465

S Commandsshow health leaf inventory module

show health leaf inventory module fabricportshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>

Description: Show information for fabric port

Syntax:

Leaf id<leafId>

please enter the module number<lcSlot>

pls enter the fabric port number<fabPort>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module<lcSlot> fabricport <fabPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)466

S Commandsshow health leaf inventory module fabricport

show health leaf inventory module leafportshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot> leafport <leafPort>

Description: Show information for leaf port

Syntax:

Leaf id<leafId>

please enter the module number<lcSlot>

pls enter the leaf port number<leafPort>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module<lcSlot> leafport <leafPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 467

S Commandsshow health leaf inventory module leafport

show health leaf inventory powersupplyshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory powersupply <psuSlot>

Description: Show inventory power supply information

Syntax:

Leaf id<leafId>

pls enter the powersupply number<psuSlot>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventorypowersupply <psuSlot>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)468

S Commandsshow health leaf inventory powersupply

show health leaf inventory supervisorshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory supervisor <supMod>

Description: Show information for supervisor module

Syntax:

Leaf id<leafId>

pls enter the supervisor module number<supMod>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory supervisor<supMod>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 469

S Commandsshow health leaf inventory supervisor

show health leaf protocolshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> protocol <protName>

Description: Show command for protocol

Syntax:

Leaf id<leafId>

Protocol name<protName>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> protocol <protName>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1)470

S Commandsshow health leaf protocol

show health leaf vpcshow health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>][end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vpc <vpcPort>

Description: Virtual port channel information

Syntax:

Leaf id<leafId>

pls enter virtual port channel number<vpcPort>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time<YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vpc <vpcPort>

Cisco APIC NX-OS Style CLI Command Reference, Release 2.2(1) 471

S Commandsshow health leaf vpc