refrigerators k(es) kp(es)

Post on 26-Apr-2022

2 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

Upright Refrigerators

K(es)KP(es)

K(es)KP(es)

Upright refrigerator

Vegetable bins

Refrigerator with or without 4-star freezer compartment

Bottle shelf

K(es)KP(es)

Control elements

Appliance without 4-star freezer compartmentAppliance without 4-star freezer compartment

The appliance is equipped with a single compressor.

• Control knob for switching the appliance ON/OFF and for setting the temperature

• Ventilation button for switching the fan ON/OFF• SuperCooling button for switching the refrigerator to the coldest setting

for 6 hours

The appliance is equipped with a single compressor.

• Control knob for switching the appliance ON/OFF and for setting the temperature

• Ventilation button for switching the fan ON/OFF• SuperCooling button for switching the refrigerator to the coldest setting

for 6 hours

K(es)KP(es)

Control elements

Appliance with 4-star freezer compartmentAppliance with 4-star freezer compartment

The appliance is equipped with a single compressor. The freezer temperature is controlled in dependence of the refrigerator temperature.

• Control knob for switching the appliance ON/OFF and for setting the temperature

• Ventilation button for switching the fan ON/OFF• SuperFrost button for freezer compartment; interior light operates

at half power

The appliance is equipped with a single compressor. The freezer temperature is controlled in dependence of the refrigerator temperature.

• Control knob for switching the appliance ON/OFF and for setting the temperature

• Ventilation button for switching the fan ON/OFF• SuperFrost button for freezer compartment; interior light operates

at half power

K(es)KP(es)

Sensor functions

• Switches the fan ONFan runs in parallel to the compressor

Ventilation(dep. on model) ON

• Control lamp lights up• Switches the appliance to the coldest control setting

for 6 hours• Display reads 1°C• Fan on permanently (even when compressor is idle)

SuperCooling (no 4*) ON

• Control lamp lights up• Interior light operates at half power (winter heater)• Control setting > +5°C -> reference setting +5°C• Control setting < +5°C -> reference setting• Display not changed whilst SuperFrost activated• Switches off automatically after 65 hours

SuperFrost (with 4*) ON

K(es)KP(es)

Sensor functions

• Switches the compressor ON and OFFEvaporator sensor

• Switches the winter heater (bulb lights at half power) on at low ambient temperatures (below+19°C)

Ambient air sensor(operating panel board)

Removing the Electronic Controls

K(es)KP(es)

Dismantling the front housing

The front housing must be dismantled in order to replace the electronic controls.

Remove cover caps

K(es)KP(es)

Dismantling the front housing

Prise off cover

K(es)KP(es)

Dismantling the front housing

Remove Torx screws

K(es)KP(es)

Dismantling the front housing

The cable routing has been adapted so that the front housing may be placed onto the appliance top.

K(es)KP(es)

Dismantling the front housing

The board support must be detached in order to remove the electronic controls.

Removing the Electronic Controls on Aluminium and

Stainless Steel Appliances

K(es)KP(es)

Installation instructionsRemoving the electronic controls

Detach covers

K(es)KP(es)

Installation instructionsRemoving the electronic controls

Remove Torx screws

K(es)KP(es)

Installation instructionsRemoving the electronic controls

Remove front housing

K(es)KP(es)

Installation instructionsRemoving the electronic controls

Disconnect connectors

K(es)KP(es)

Installation instructionsRemoving the electronic controls

Detach board support

K(es)KP(es)

Installation instructionsRemoving the electronic controls

Detach board

New Strain Relief Device

K(es)KP(es)

Installation instructionsDetaching the strain relief device

Unclip ventilation grill by pulling upwards

K(es)KP(es)

Installation instructionsDetaching the strain relief device

Remove Torx screws(different attachment methods:

2 screws on the left and right or 1 in the centre)

K(es)KP(es)

Installation instructionsDetaching the strain relief device

Release lips

K(es)KP(es)

Installation instructionsDetaching the strain relief device

The strain relief device can now be removed to the rear.

3-series ElectronicsService Menu

K(es)KP(es)

Operation

e.g. C 3523-20

Service menu operationStarting position: All control knobs set to “0”

Combined refrig.-freezers: SF button + Freezer control knobFreezers: SF button + Freezer control knobRefrigerators: SC or SF button + Refrigerator

control knob

K(es)KP(es)

Mode selection

Normal operation

No Demo andCS modes on

CN ...3

! !

Control knob Control knobMode sel.

1 / -32QA mode

Activation of

consumers

QA mode (reserved for

factory testing)

Demo mode(Sales mode)

7 / -18Demo

5 / -21CS mode

Manual

defrosting

-15Defrosting

e.g. C 3523-20

SF LED flashes

SF SF SF

No button pressed for 2 min.: switch-over to normal operating mode

No automatic switch-over to normal mode

All modes are available (e.g. Defrosting not applicable to C 3523)

SF + Control knob 0 -> max.

K(es)KP(es)

Mode selection video

K(es)KP(es)

Manual defrosting

Normal operation

Mode sel.

Manual defrosting on NoFrost appliances (only when the evaporator is cold)

CN: Heater switched on and off by bimetallic switch: OFF at +8°C and ON at -2°C Display: SF LED and -15°C LED flash as long as the heater is ONHeater OFF only by: setting freezer control knob to “0” or mains OFF

GN: max. defrosting time: 50 minutes or until evaporator sensor reads +10°CDisplay: Reference settings

e.g. C 3523-20

SF LEDflashes

SF

SF + Control knob 0 -> max.

Control knob Control knob

5 / -21CS mode

1 / -32QA mode

-15Defrosting

7 / -18Demo

K(es)KP(es)

Demo mode

Normal operation

Mode sel.

7 / -18Demo

-15Defrosting

Freezer LED

-18 flashes Demo mode OFF

-18 flashes rapidly Demo mode ON

Demo mode

ON

OFF

e.g. C 3523-20

SF LEDflashes

SF

SF

SF + Control knob 0 -> max.

Control knob Control knob

5 / -21CS mode

1 / -32QA mode

K(es)KP(es)

Demo mode NEW FEATURE

IMPORTANT: NEW FEATURE!

On

combined refrigerator-freezers andNoFrost appliances

Demo mode remains active even after

mains OFF/ON!

K(es)KP(es)

Demo mode video

K(es)KP(es)

CS mode: Operating panel test

Normal operation

Mode sel.

e.g. C 3523-20

SF + Control knob 0 -> max.

SF LEDflashes

Control knob Control knob

5 / -21CS mode

Operating panel test (freezers without NoFrost system start the operating panel test at step 2)

The LEDs are activated in turn in steps 1 – 3 (light up).

1. Open/Close refrigerator door2. Set RC + FC control knobs from “0” to “max.” and from “max.” to “0”3. Press each button once

SF

1 / -32QA mode

-15Defrosting

7 / -18Demo

K(es)KP(es)

CS mode: Load sequence

Refrigerator Freezer Load sequence

LED LED

9 / -15 All consumers OFF

-18 Freezer compressor ON, solenoid valve: B

7 Refrigerator compressor ON, solenoid valve: A

-21 Freezer fan ON

-25 Defrost heater ON

1 / -32 Light ON

5 Refrigerator fan ON

3 Refrigerator heater ON

B: Freezer comp. A: Refrigerator and freezer comp.

Operating panel test OK

To quit CS mode: Set freezer control knob to “0”

SF

SF

K(es)KP(es)

CS mode video

3-series ElectronicsError Code

K(es)KP(es)

Error code

Error code display (flashing SF LED + audible warning signal)

Display Defect

Refrigerator LED 7 Ambient air sensorRefrigerator LED 5 BioFresh air sensorRefrigerator LED 3 Refrigerator evaporator sensorRefrigerator LED 1 Refrigerator air sensor

Freezer LED -15 Freezer air sensorFreezer LED -18 Freezer evaporator sensorFreezer LED -25 Ambient air sensor

An ambient air sensor error is checked and displayed only during the operating panel test

3-series ElectronicsSensor Values

K(es)KP(es)

Sensor values

Sensor values of the new electronic control systemCommon sensor values for cooling, BioFresh, freezing

112.7-35

34-15

156-40

82.3-30

60.7-25

45.3-20

25.8-10

19.8-5

15.30

11.95

9.310

7.315

5.820

4.725

Resistance[kOhm]

Temperature[°C]

3-series Electronics Data

K(es)KP(es)

Electronics data

Electronics data

Display: Reference setting display/adjustment

SuperCooling: 6 hours, reference setting +1°C

SuperFrost: 65 hours, reference setting -39°C (CN: -32°C)

RC compressor continuous operation limited to: 4 hours

Compressor reactivation delay: 8 minutes

Light OFF when door open: 15 minutes

Emergency operation (only in the event of a sensor error)

Refrigerator compressor: Cyclic operation

Freezer compressor: Continuous operation

Door alarm: After 60 seconds, only on NoFrost appliances

Temperature alarm: From -8°C, t > 90 min. or -10°C, t > 30 min.

Temperature alarm or sensor error: Audible warning signal + flashing visual

warning LED, signal can be cancelled (LED lit)

(Not all 3-series electronics are equipped with an audible warning signal)

top related