porteous - brighton best international
Post on 02-Nov-2021
7 Views
Preview:
TRANSCRIPT
PRODUCT & TECHNICAL INFORMATIONPRODUCT & TECHNICAL INFORMATION
P O R T E O U SF A S T E N E RC O M P A N Y
Construction Products Division
Porteous Fastener Company
PORTEOUS FASTENER COMPANYPorteous Fastener Company is the largest family-owned master distributor of steel fastening products in the country. With sixteen locations across the Nation, we offer both bulk and packaged fasteners to resellers everywhere. And now with theacquisition of the U.S. Anchor Mechanical Anchor Division, we can include a wide rangeof high quality anchors of all types with the same shipment of fasteners.
Through our Construction Products Division we can supply hex, carriage, lag, and structural bolts, the companion nuts and washers, smaller screws, threaded rod, andnow anchors, all made by the best factories in America and Asia.
Call 877- I BUY PFC for the branch nearest you or check out our website at www.porteousfastener.com where you may place your order online.
Atlanta, GA(770) 449-8120
Chicago, IL(847) 228-6313
Cleveland, OH(216) 518-0562
Dallas, TX(972) 660-9121
Denver, CO(303) 576-0530
Hayward, CA(510) 471-4801
Houston, TX(713) 676-1211
Kansas, MO(816) 241-2324
Los Angeles, CA(310) 847-6776
Memphis, TN(901) 556-9533
Perth Amboy, NJ(856) 983-6620
Portland, OR(503) 248-0107
Salt Lake City, UT(801) 972-1313
Seattle, WA(425) 656-9703
Tampa, FL(813) 247-6675
Detroit, Michigan(586) 558-9503
Porteous Fastener Company
Porteous Fastener Company
3
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5Product Application and Cross-Reference Guide . . . . . . . . . . 6-7WEDGE ANCHOR — ULTRAWEDGE™ . . . . . . . . . . . . . . . . . . . . 8
Carbon Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Hot Dipped Galvanized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Acoustical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9303 Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9316 Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SLEEVE ANCHORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Acorn Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Hex Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Flat Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Round Head. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10304 Stainless Steel with Hex Heads . . . . . . . . . . . . . . . . . . 10304 Stainless with Flat Heads . . . . . . . . . . . . . . . . . . . . . . . 10
SLEEVE TYPE ROD HANGERS . . . . . . . . . . . . . . . . . . . . . . . . 10DROP-IN ANCHORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
Carbon Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Setting Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Shorty Drop-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MACHINE SCREW ANCHORS . . . . . . . . . . . . . . . . . . . . . . . . . 11Setting Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CONCRETE SCREWS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Hex Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Flat Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CONCRETE SCREW ACCESSORIES . . . . . . . . . . . . . . . . . . . . 11BITS FOR CONCRETE SCREWS . . . . . . . . . . . . . . . . . . . . . . . 12TOGGLE BOLTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mushroom Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Round Head. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Flat Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Acoustical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
TOGGLE WINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12HAMMER DRIVE ANCHORS. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Zinc Alloy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Zinc Alloy with Stainless Nails . . . . . . . . . . . . . . . . . . . . . . . 13
HOLLOW WALL ANCHORS . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Hollow Wall Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Drive Anchors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Setting Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
LAG SHIELDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13SINGLE EXPANSION SHIELDS. . . . . . . . . . . . . . . . . . . . . . . . . 13DOUBLE EXPANSION SHIELDS . . . . . . . . . . . . . . . . . . . . . . . . 14SPLIT - FAST ANCHOR (Flat Head) . . . . . . . . . . . . . . . . . . . . . 14CONICAL PLASTIC ANCHORS. . . . . . . . . . . . . . . . . . . . . . . . . 14PLASTIC ANCHOR KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14NYLON NAIL ANCHORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14EYE COUPLINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14MUNGO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Nylon Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Universal Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Jet Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Jet Plug Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
INSTALLATION INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . 16-17Wedge Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Sleeve Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Drop-In Anchors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Concrete Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
LINE CARD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-19
MECHANICAL ANCHORING SYSTEMS
Porteous Fastener Company
Porteous Fastener Company
4
One pieceexpansion boltwith universalstyle collar for
heavy dutyfastening
applications.
Requires noother fastener
Concrete, Stone
Steel, 303 & 316S.S., Galvanized
1/4" x 1 3/4"to
1 1/4" x 12"8, 9
Heavy dutyanchor available
in many headstyles. Does notrequire a solid
base material forinstallation.
Requires no otherfastener
Concrete, Brick,Block, Stone
Steel, 304 S.S.
1/4" x 7/8"to
3/4" x 6 1/4"10
For medium tolight duty
applications.Available in hex
or flat head.Corrosive
resistant coating.
Requires noother fastener
Concrete, Brick,Block
Steel
3/16" x 1 1/4"to
1/4" x 5"11, 12
Female styleanchor with an
internalplug for
heavy dutyapplications.
Machine screwor bolt
Concrete, Stone
Steel, 303 S.S.
1/4" to 3/4"
10, 11
A high qualityzinc alloy anchor
for light tomedium fastening
applications.Expands by
tightening screwor bolt.
Lag bolt
Concrete, Brick,Mortar joint
Rustproof ZincAlloy
1/4" to 5/8"
13
SLEEVE LAGSHIELDDROP-INWEDGE CONCRETE
SCREWEasily hammeredinto a predrilled
hole. Available inflat head.
Requires no other fastener
Concrete, Stone
Steel
1/4” x 1 1/4"to
1/4” x 4"14
A high qualityzinc alloy anchor
that is easy toinstall. Sets by
tightening screwor bolt.
Machine screwor bolt
Concrete, Block,Stone, Brick
Rustproof ZincAlloy
1/4" to 5/8"
13, 14
A light-dutyfastener for use
in most mediums.
Available inmushroom head.
Requires no other fastener
Concrete, Block,Stone, Brick
Nylon and Steel
1/4" x 3/4"to
1/4" x 3"14
PRODUCTINFORMATION
FOR USEWITH
FOR USE IN
MADE OF
SIZE RANGE
PAGE
SPLIT FASTANCHOR
SINGLE/DOUBLEEXPANSION
NYLON NAILANCHOR
ANCHORTYPE
A caulking typeanchor with a
Zinc alloy coneand a
Lead ring.
Machine screw or bolt
Concrete, Block,Stone, Brick
Zinc Alloy andLead
10 - 24to
5/8"
11
Fully threadedmachine screwswith Zinc plated
wings. Formedium dutyfastening inhollow walls.
Requires no other fastener
Drywall, Hollow-block, Plaster
Steel
1/8" x 2"to
1/2" x 6"
12
For light dutyfastening in
hollow wall. Canbe expanded
with screw-driveror setting tool.
Requires noother fastener
Drywall, Plaster,Paneling
Steel
1/8" x shortto
1/4" Long13
A mushroom headanchor that is
relatively tamper-proof. Availablewith standard
Zinc Plated Steelnail or Stainless
Steel nail.
Requires no other fastener
Concrete, Brick,Block, Stone
High grade Zincalloy and Steel
3/16" x 7/8"to
1/4" x 3"
12, 13
Top quality nylonanchor that
saves time ininstallation. TheMN is an idealalternative to
many anchoringsystems including
lag shields andmachine screws
anchors.Machine Screws,
Sheet MetalScrews, Lag
Screws,Woodscrews,Threaded Rod
Concrete, Brick,Stone
Virgin Nylon
5/32" x 3/4"to
3/4" x 3 9/16"
14, 15
TOGGLEBOLT
MUNGONYLON PLUG
HAMMERDRIVE
MACHINESCREW ANCHOR
HOLLOWWALL
Fast no drilling forlight duty
fastening. Setswith screwdriver.
Convenientlypackaged for all
job sizes.Heatproof.
Sheet metalscrews
Sheetrock,Gypsum,
Chipboard,Aerated
Concrete, Plaster
Zinc, Nylon
#8
15
PRODUCTINFORMATION
FOR USEWITH
FOR USE IN
MADE OF
SIZE RANGE
PAGE
MUNGO JETPLUG
CONICAL PLASTICANCHOR
ANCHORTYPE
EYECOUPLING
This light-dutyplastic anchor isused with sheetmetal screws indrywall, block,
brick, or concrete.Available in kitspackaged with
screws and a drillbit.
Sheet metalscrews
Drywall, concrete,brick, block
Plastic
3/16" x 3/4"to
5/16" x 1 3/8"
14
Fasten toexpansionanchors or
threaded rod thathas already been
installed. Forpipe hanging or
tie downapplications.
Threaded Rod
N/A
Steel
1/4" and 3/8"
14
MECHANICAL ANCHORING SYSTEMS
Porteous Fastener Company
Porteous Fastener Company
BUILDING CONTRACTOR USESWedge Anchors
Structural supports to concreteTilt-up constructionsMachinery mountsHighway rails, post, guard apparatusPallet racksConveyorsDock bumpers
Sleeve AnchorsL brackets to block, concreteDoor and window framesPartitions, cabinets and shelvesBase angles and duct strapsPatio screen enclosures (acorn head)Dock Bumpers
Drop-InsPipe hangingMachinery mounts and halvesTransformers and metersJ Bolts in lane additions
Concrete Screws2 x 4's to concreteRigid wall insulationDuct strapsShelvingPlywood to concrete for hurricanesFurring Strips
Machine Screw AnchorsLight machineryHandrailsShuttersAir conditioning units
Lag ShieldsHurricane shutter brackets
ELECTRICAL CONTRACTOR USESWedge Anchor
Cable traysStrut for conduit & panels
Sleeve AnchorElectrical enclosuresTransformers
Sleeve Anchor Rod HangersSuspended lighting or conduit
Machine Screw AnchorsConduit clipsElectrical switchesLarge fuse boxes
Concrete ScrewsLight fixturesJunction boxesConduit straps
Lag ShieldsPipe and conduit hangers
Hammer Drives/Nylon Nail Anchors/Plastic Anchors
ThermostatsLighting fixturesConduit clipsJunction boxes
PLUMBING CONTRACTOR USESWedge Anchors
Pipe supportDrop-Ins
Pipe hangersAir ducts
Sleeve AnchorsWindow & door framesCabinetsDuct strapsSink support brackets
Concrete ScrewsWater control systemsMetersExterior sprinkler linesPipe Strapping
Mechanical or expansion anchors have been in use for generations now. Most rely on frictionto hold them in place. The anchor is simplyinserted into the hole and expanded.
The correct anchor for the job is specifiedbased on load requirements, the individualapplication, environment, approvals needed and the type of substrate it will be anchored in.Typical substrates are concrete, block, brick,stone and drywall.
Porteous Fastener Company offers one of thebroadest lines of mechanical anchors availablein a wide variety of diameters and lengths.Products such as the Ultrawedge™ confirm ourcommitment to quality and performance byproviding our customers with an exceptionalproduct priced to compete in today’s economy.
As important as price is the expected quality.Our Quality Control Department conductsrigorous product performance evaluations on adaily basis. This insures that our products meetour customers demanding standards andconform to GSA Spec. FF-S-325 requirements.
This section offers many useful anchor selectioncharts to aid the distributor and his customer,the end user, in choosing the right anchor.Today, different anchor manufacturers havecreated various trade-names all representing thesame style of anchor. This often gets confusingto the distributor or contractor. For this reason,pictures can often be the most helpful tool. Besure to reference our catalog in order to supplycontractors with the appropriate items whenthey request anchors by trade-name.
5Porteous Fastener Company
Porteous Fastener Company
INDUSTRY TRADE NAMES FOR MECHANICAL ANCHORS
Bantam Plug™ - Conical Plastic Anchor3
Calk-In™ - Machine Screw3
Conset Concrete Screws - Concrete Screw1
DMSA - Double Expansion Anchor2
Drive® - Split Fast Anchor3
Dynabolt® - Sleeve Anchor4
ESA - Machine Screw Anchor2
Hammer-Set™ - Nail Drive Anchor4
HIT Anchor - Hammer Drive5
HWA - Hollow Wall Anchor2
Keystone® Single - Single Expansion Anchor1
Keystone® Double - Double Expansion Anchor1
Kwik Bolt II - Wedge Anchor5
Kwik-Con - Concrete Screw5
Lok-Bolt™ - Sleeve Anchor3
LSES - Lag Screw Expansion Shield2
Multi-Set II® - Drop-In Anchor4
Nailon™ - Hammer Drive2
Plastic Screw Anchors - Conical Plastic Anchors1
Polly™ - Hollow Wall Anchor3
Power-Stud™ - Wedge Anchor3
PSA - Plastic Screw Anchor2
Red Head - Wedge Anchor4
Redi-Bolt® - Sleeve Anchor4
Sleeve-All™ - Sleeve Anchor2
SMSA - Single Expansion Anchor2
Split Bolt - Split Drive5
Sup-R-Caulk™ - Machine Screw Anchor1
Sup-R-Drop™ - Drop-In1
Sup-R-Lags™ - Lagshield1
Sup-R-Sleeve® - Sleeve Anchor1
Sup-R-Stud® - Wedge Anchor1
Sup-R-Toggle™ - Toggle Bolt1
SWTB - Toggle Bolt2
Tapcon® - Concrete Screw4
Tap-It - Nylon Nail Anchor1
Tapper® - Concrete Screw3
Thunder Bolt® - Sleeve Anchor6
Thunder Stud® - Wedge Anchor6
Titen - Masonry Screw Anchor2
Trubolt® - Wedge Anchor4
Wedge-All™ - Wedge Anchor2
Zamac Nailin® - Hammer Drive3
Zap-It® Drive Anchor - Hammer Drive1
BRAND NAMES MARKETED BY Porteous Fastener CompanyUltrawedge™ - Premium wedge anchor with
longer thread lengthKingPin™ - Mechanical anchor product lineTapKing™ - Concrete screwMungo™ - Nylon anchoring plugs and Zinc or
Nylon “EZ style” anchorsUltrabond™ - 1:1 ratio epoxy anchoring systemHS-200™ - 2:1 ratio epoxy anchoring systemSpeedSet 2 - Fast setting 10:1 ratio adhesive systemCrackbond® - Concrete repair crack injection systemThe Cracker™ - Non explosive demolition agent
1 Items listed are trademarks or registered trademarks of MKT
2 Items listed are trademarks or registered trademarks of Simpson Strong Tie
3 Items listed are trademarks or registered trademarks of Powers Fastening, Inc.
4 Items listed are trademarks or registered trademarks of ITW
5 Items listed are trademarks or registered trademarks of Hilti,Corp.
6 Items listed are trademarks or registered trademarks of Marksmen Manufacturing
For reference only. Does not guarantee that products are an exact equal of competing products’ physical characteristics orperformance. Porteous Fastener Company has no affiliation withany competing companies listed above.
1 2 3 4 5
Ultrawedge™One-piece expansionbolt for heavy-dutyapplication in solidconcrete or stone.Available in carbonsteel, 303 & 316
stainless steel andgalvanized.
Sleeve AnchorHeavy-duty anchor
available in many headstyles. Use in
concrete, brick, stoneor hollow block. Also available instainless steel.
Drop-in AnchorFemale style anchorwith an internal plug
for heavy-dutyapplications in solid
concrete or stone. Usewith machine screw or
bolt.
Machine ScrewAnchor
Caulking type anchorwith zinc alloy coneand lead ring. For
medium-duty use withmachine screw or boltin concrete or stone.
Concrete Screw Anchor
For medium tolight applicationsin concrete, brickor block. Hex or
flat head withcorrosive resistant
coating.
11 12 13 14
Double Expansion ShieldsRustproof zinc alloy anchor foruse in concrete, block, stoneor brick. Works well in softmasonry or in mediums of
unknown strength. For medium-duty use withmachine screw or bolt.
Split - Fast AnchorThis nail-in type anchor is
easily hammered into a pre-drilled hole for medium
to light-duty use inconcrete or stone.
Conical Plastic AnchorThis light-duty plastic
anchor is used with sheetmetal screws in drywall,block, brick, or concrete.Available in kits packagedwith screws and a drill bit.
Nylon Nail AnchorThis anchor has anylon body and a
steel pin. For light-duty use in concrete,
block, brick, stoneand wallboard.
152
14
17
13
6
12
16
2
17
13
6
US ANCHOR PRODUCT
Porteous Fastener Company
Porteous Fastener Company
BUILDING CONTRACTOR USESWedge Anchors
Structural supports to concreteTilt-up constructionsMachinery mountsHighway rails, post, guard apparatusPallet racksConveyorsDock bumpers
Sleeve AnchorsL brackets to block, concreteDoor and window framesPartitions, cabinets and shelvesBase angles and duct strapsPatio screen enclosures (acorn head)Dock Bumpers
Drop-InsPipe hangingMachinery mounts and halvesTransformers and metersJ Bolts in lane additions
Concrete Screws2 x 4's to concreteRigid wall insulationDuct StrapsShelvingPlywood to concrete for hurricanesFurring Strips
Machine Screw AnchorsLight MachineryHandrailsShuttersAir conditioning units
Lag ShieldsHurricane shutter brackets
ELECTRICAL CONTRACTOR USESWedge Anchor
Cable traysStrut for conduit & panels
Sleeve AnchorElectrical enclosuresTransformers
Sleeve Anchor Rod HangersSuspended lighting or conduit
Machine Screw AnchorsConduit clipsElectrical SwitchesLarge fuse boxes
Concrete ScrewsLight fixturesJunction boxesConduit straps
Lag ShieldsPipe and conduit hangers
Hammer Drives/Nylon Nail Anchors/Plastic Anchors
ThermostatsLighting fixturesConduit clipsJunction boxes
PLUMBING CONTRACTOR USESWedge Anchors
Pipe supportDrop-Ins
Pipe hangersAir ducts
Sleeve AnchorsWindow & door framesCabinetsDuct strapsSink support brackets
Concrete ScrewsWater control systemsMetersExterior sprinkler linesPipe Strapping
6 7 8 9 10
Toggle BoltFully-threaded
machine screws with toggle wings for medium-duty
fastening in hollow walls.
Hammer DriveAnchor
Zinc alloy anchor witheither steel or
stainless nail formedium-duty use inconcrete, brick, blockor stone. Relatively
tamperproof.
Hollow Wall AnchorFor light-dutyfastening in
hollow walls. Can beexpanded with settingtool or screwdriver.
Lag Shield AnchorRustproof zinc alloyanchor for light to
medium-dutyapplications in
concrete, brick, blockor mortar joint. Use
with lag bolt.
Single ExpansionShields
Rustproof zinc alloyanchor for use inconcrete, block,
stone or brick. Formedium-duty use
with machine screw or bolt.
15 16 17
Eye CouplingFasten to expansion
anchors or threaded rodthat has already been
installed. For pipe hangingor tie down applications.
Mungo PlugNylon anchors used with coarse
thread screws for light to medium use in concrete, block, brick
or stone.
Mungo Jet PlugAvailable in zinc or nylon for
light-duty use in drywall. Use with a
#8 sheet metal screw.
1
35
4 9
16
711
10
8
USAGE CHART
7Porteous Fastener Company
Porteous Fastener Company
Tests were independently performedin accordance with ASTM E488 andICBO AC58. A safety factor of 4:1 or 25% is generally accepted as a
safe working load. Reference shouldbe made to applicable codes for the specific working ratio.
Some test values are interpolations or extrapolations.
*Thread length is measured from top end of anchor including
Bull Nose head.
HEAD STAMPED — Helps determinelength of anchor after installation.
BULL NOSE HEAD — Helps to ensurethat threads won’t be damaged duringinstallation.
LONGER THREAD LENGTH — Gives greater versatility in anchorembedment depth with one anchor.
IMPRESSIVE PULLOUT VALUES —Stronger steel and anchor designprovide better load values for lessmoney.
UNIVERSAL COLLAR — Widely accepted collar design greatlyreduces the chance of spinning duringinstallation.
COINED COLLAR — Leading edgespecifically designed for quickinstallation.
TRADEMARKED — Indicatesproprietary product insuring consistentquality.
ITEMCODE
DIA. &LENGTH
MIN.EMBEDMENT
THREADLENGTH*
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
W1416K 1/4" x 1 3/4" 1 1/8" 7/8" 100/1000 3.32W1422K 1/4" x 2 1/4" 1 1/8" 1 3/8" 100/1000 3.92W1432K 1/4" x 3 1/4" 1 1/8" 2" 100/1000 5.20W3822K 3/8" x 2 1/4" 1 1/2" 1" 100/600 8.22W3826K 3/8" x 2 3/4" 1 1/2" 1 1/2" 100/500 10.50W3830K 3/8" x 3" 1 1/2" 1 13/16" 100/500 11.36W3836K 3/8" x 3 3/4" 1 1/2" 2 1/2" 100/500 13.38W3850K 3/8" x 5" 1 1/2" 2 13/16" 50/300 16.84W3864K 3/8" x 6 1/2" 1 1/2" 4" 50/300 22.36W1226K 1/2" x 2 3/4" 2 1/4" 1 5/16" 50/250 20.00W1236K 1/2" x 3 3/4" 2 1/4" 2 5/16" 50/250 26.12W1242K 1/2" x 4 1/4" 2 1/4" 2 13/16" 25/200 28.48W1254K 1/2" x 5 1/2" 2 1/4" 3 1/4" 25/150 32.48W1270K 1/2" x 7" 2 1/4" 4" 25/125 43.52W1284K 1/2" x 8 1/2" 2 1/4" 4" 25/100 53.44W12100K 1/2" x 10" 2 1/4" 4" 25/100 58.24W12120K 1/2" x 12" 2 1/4" 4" 25/100 69.68W5834K 5/8" x 3 1/2" 2 3/4" 1 13/16" 25/125 41.60W5844K 5/8" x 4 1/2" 2 3/4" 2 7/8" 25/125 47.04W5850K 5/8" x 5" 2 3/4" 3 5/16" 25/125 46.56W5860K 5/8" x 6" 2 3/4" 4" 25/100 57.84W5870K 5/8" x 7" 2 3/4" 4" 25/100 72.40W5884K 5/8" x 8 1/2" 2 3/4" 4" 25/100 83.84W58100K 5/8" x 10" 2 3/4" 4" 10/40 96.60W58120K 5/8" x 12" 2 3/4" 4" 10/40 102.97W3442K 3/4" x 4 1/4" 3 1/4" 2 3/8" 20/100 65.20W3446K 3/4" x 4 3/4" 3 1/4" 2 13/16" 20/80 71.70W3454K 3/4" x 5 1/2" 3 1/4" 3 1/2" 20/80 78.40W3462K 3/4" x 6 1/4" 3 1/4" 4" 10/60 90.60W3470K 3/4" x 7" 3 1/4" 4" 10/50 98.00W3484K 3/4" x 8 1/2" 3 1/4" 4" 10/50 118.00W34100K 3/4" x 10" 3 1/4" 4" 10/40 138.80W34120K 3/4" x 12" 3 1/4" 4" 10/40 169.20W7860K 7/8" x 6" 3 7/8" 3 1/4" 5/50 126.40W7880K 7/8" x 8" 3 7/8" 3 1/4" 5/25 160.80W78100K 7/8" x 10" 3 7/8" 4" 5/20 197.20W10060K 1" x 6" 4 1/2" 3 1/4" 5/30 170.80W10090K 1" x 9" 4 1/2" 3 1/4" 5/20 240.00W100120K 1" x 12" 4 1/2" 4" 5/20 288.00W100150K 1" x 15" 4 1/2" 4" 5/20 366.40W11490K 1 1/4" x 9" 5" 3 1/4" 5/15 367.60W114120K 1 1/4" x 12" 5" 4" 5/15 460.00
ANCHOR TEST RESULTS
1/4"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
3"
4 1/2"
6"
7 1/2"
9"
10 1/2"
12"
1 1/4"
1 7/8"
2 1/2"
3 1/8"
3 3/4"
4 3/8"
5"
6 1/4"
1 1/4"--
1 7/8"--
2 1/2"--
3 1/8"--
3 3/4"--
4 3/8"--
5"--
0.78--
0.78--
0.78--
0.78--
0.78--
0.78--
0.78--
1 1/8"1 15/16"2 3/4"1 1/2"3 1/4"
5"2 1/4"4 1/8"
6"2 3/4"4 7/8"
7"3 1/4"5 5/8"
8"3 7/8"6 5/16"8 3/4"4 1/2"7 1/4"
10” 5"
7 1/2"10"
1,4521,4521,4524,8084,8084,8088,1688,1688,16811,52911,52911,52913,22413,22413,22414,91214,91214,91216,59716,59716,597
2,0282,0282,0283,2263,2263,2266,6879,6899,6899,8629,8629,86213,48413,48413,48417,32217,32217,32223,89223,89223,892
1,4172,2693,1202,3353,3944,4523,8765,2086,5395,4297,808
10,1878,812
11,87414,93512,04415,79619,54814,56622,65130,73614,94327,69040,437
1,4521,4521,4524,8084,8084,8088,1688,1688,168
11,52911,52911,52913,22413,22413,22414,91214,91214,91216,59716,59716,597
ANCHORSIZE
EMBEDMENTDEPTH
CRITICALEDGE
DISTANCE
f’c = 2000 psiULTIMATETENSION
LOAD (lbs.)
ULTIMATESHEAR
LOAD (lbs.)
CRITICALEDGE
DISTANCE
ULTIMATETENSION
LOAD (lbs.)
ULTIMATESHEAR
LOAD (lbs.)
MINIMUMEDGE
DISTANCE
MINIMUMEDGE
REDUCTION
f’c = 4000 psi ICC-ES Approved(formerly ICBO)
Report #ER-6083
Pending
8
ULTRAWEDGE™ WEDGE ANCHORS
Porteous Fastener Company
Porteous Fastener Company
9
ITEMCODE
DIA. &LENGTH
MIN.EMBEDMENT
THREADLENGTH*
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
W1226GK 1/2" x 2 3/4" 2 1/4" 1 5/16" 50 / 250 20.00W1242GK 1/2" x 4 1/4" 2 1/4" 2 13/16" 25 / 200 28.48W1254GK 1/2" x 5 1/2" 2 1/4" 3 1/4" 25 / 150 32.48W1270GK 1/2" x 7" 2 1/4" 4" 25 / 125 43.52W1284GK 1/2" X 8 1/2" 2 1/4" 4" 25/125 53.44
W5834GK 5/8" x 3 1/2" 2 3/4" 1 13/16" 25 / 125 41.60W5850GK 5/8" x 5" 2 3/4" 3 5/16" 25 / 125 46.56W5860GK 5/8" x 6" 2 3/4" 4" 25 / 100 57.84W5884GK 5/8" x 8 1/2" 2 3/4" 4" 25 / 100 83.84
W3446GK 3/4" x 4 3/4" 3 1/4" 2 13/16" 20 / 80 71.70W3454GK 3/4" x 5 1/2" 3 1/4" 3 1/2" 20 / 80 78.40W3462GK 3/4" x 6 1/4" 3 1/4" 4" 10 / 60 90.60W3484GK 3/4" x 8 1/2" 3 1/4" 4" 10 / 50 118.00
ITEMCODE
DIA. & LENGTH
DRILL DIAMETER
MIN.EMBEDMENT
EYE DIAMETER
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
W1422AK 1/4" X 2 1/4" 1/4" 1 1/8" 1/4" 100 / 1000 20.00
Acoustical
The acoustical wedge anchor is aone piece anchor, typically usedin concrete or other solid mediumapplications for hanging drop-ceilings, lighting fixtures, etc.
ITEMCODE
DIA. &LENGTH
MIN.EMBEDMENT
THREADLENGTH*
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
W1416S3K 1/4" x 1 3/4" 1 1/8" 7/8" 100 / 1000 3.32W1422S3K 1/4" x 2 1/4" 1 1/8" 1 3/8" 100 / 1000 3.92W1432S3K 1/4" x 3 1/4" 1 1/8" 2" 100 / 1000 5.20
W3826S3K 3/8" x 2 3/4" 1 1/2" 1 1/2" 100 / 500 10.50W3830S3K 3/8" x 3" 1 1/2" 1 13/16" 100 / 500 11.36W3836S3K 3/8" x 3 3/4" 1 1/2" 2 1/2" 100 / 500 13.38W3850S3K 3/8" x 5" 1 1/2" 2 13/16" 50 / 300 16.84
W1226S3K 1/2" x 2 3/4" 2 1/4" 1 5/16" 50 / 250 20.00W1236S3K 1/2" x 3 3/4" 2 1/4" 2 5/16" 50 / 250 26.12W1242S3K 1/2" x 4 1/4" 2 1/4" 2 13/16" 25 / 200 28.48W1254S3K 1/2" x 5 1/2" 2 1/4" 3 1/4" 25 / 150 32.48W1270S3K 1/2" x 7" 2 1/4" 4" 25 / 125 43.52
W5834S3K 5/8" x 3 1/2" 2 3/4" 1 13/16" 25 / 125 41.60W5844S3K 5/8" x 4 1/2" 2 3/4" 2 7/8" 25 / 125 47.04W5850S3K 5/8" x 5" 2 3/4" 3 5/16" 25 / 125 46.56W5860S3K 5/8" x 6" 2 3/4" 4" 25 / 100 57.84W5870S3K 5/8" x 7" 2 3/4" 4" 25 / 100 72.40W5884S3K 5/8" x 8 1/2" 2 3/4" 4" 25 / 75 83.84
W3446S3K 3/4" x 4 3/4" 3 1/4" 2 13/16" 20 / 80 71.70W3454S3K 3/4" x 5 1/2" 3 1/4" 3 1/2" 20 / 80 78.40W3462S3K 3/4" x 6 1/4" 3 1/4" 4" 20 / 80 90.60 W3470S3K 3/4" x 7" 3 1/4" 4" 10 / 50 98.00W3484S3K 3/4" x 8 1/2" 3 1/4" 4" 10 / 50 118.00
WEDGE ANCHOR LENGTH IDENTIFICATION CODES
ABCDEFGH
1.5" < 2"2" < 2.5"2.5" < 3"3" < 3.5"3.5" < 4"4" < 4.5"4.5" < 5"5" < 5.5"
CODE CODE CODE
IJKLMNOP
FROM / TO (in.) FROM / TO (in.) FROM / TO (in.)
QRSTUV
5.5" < 6"6" < 6.5"6.5" < 7"7" < 7.5"7.5" < 8"8" < 8.5"8.5" < 9"9" < 9.5"
9.5" < 10"10" < 11"11" < 12"12" < 13"13" < 14"14" < 15"
303 Stainless Steel
316 Stainless Steel
ITEMCODE
DIA. & LENGTH MIN.EMBEDMENT
THREADLENGTH*
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
W1416SK 1/4" x 1 3/4" 1 1/8" 7/8" 100 / 1000 3.32W1422SK 1/4" x 2 1/4" 1 1/8" 1 3/8" 100 / 1000 3.92W1432SK 1/4" x 3 1/4" 1 1/8" 2" 100 / 1000 5.20
W3822SK 3/8" x 2 1/4" 1 1/2" 1" 100 / 600 8.22W3826SK 3/8" x 2 3/4" 1 1/2" 1 1/2" 100 / 500 10.50W3830SK 3/8" x 3" 1 1/2" 1 13/16" 100 / 500 11.36W3836SK 3/8" x 3 3/4" 1 1/2" 2 1/2" 100 / 500 13.38W3850SK 3/8" x 5" 1 1/2" 2 13/16" 50 / 300 16.84W3864SK 3/8" x 6 1/2" 1 1/2" 4" 50 / 300 22.36
W1226SK 1/2" x 2 3/4" 2 1/4" 1 5/16" 50 / 250 20.00W1236SK 1/2" x 3 3/4" 2 1/4" 2 5/16" 50 / 250 26.12W1242SK 1/2" x 4 1/4" 2 1/4" 2 13/16" 25 / 200 28.48W1254SK 1/2" x 5 1/2" 2 1/4" 3 1/4" 25 / 150 32.48W1270SK 1/2" x 7" 2 1/4" 4" 25 / 125 43.52W1284SK 1/2" x 8 1/2" 2 1/4" 4" 25 / 100 53.44
W5844SK 5/8" x 4 1/2" 2 3/4" 2 7/8" 25 / 125 47.04W5850SK 5/8" x 5" 2 3/4" 3 5/16" 25 / 125 46.56W5860SK 5/8" x 6" 2 3/4" 4" 25 / 100 57.84W5870SK 5/8" x 7" 2 3/4" 4" 25 / 100 72.40W5884SK 5/8" x 8 1/2" 2 3/4" 4" 25 / 75 83.84W58120SK 5/8" x 12" 2 3/4" 4" 10 / 40 102.97
W3442SK 3/4" x 4 1/4" 3 1/4" 2 3/8" 20 / 100 65.20W3446SK 3/4" x 4 3/4" 3 1/4" 2 13/16" 20 / 80 71.70W3454SK 3/4" x 5 1/2" 3 1/4" 3 1/2" 20 / 80 78.40W3462SK 3/4" x 6 1/4" 3 1/4" 4" 10 / 60 90.60W3470SK 3/4" x 7" 3 1/4" 4" 10 / 50 98.00W3484SK 3/4" x 8 1/2" 3 1/4" 4" 10 / 50 118.00W34100SK 3/4" x 10" 3 1/4" 4" 10 / 40 138.80
W10060SK 1" x 6" 4 1/2" 3 1/4" 5 / 30 170.80W10090SK 1" x 9" 4 1/2" 3 1/4" 5 / 20 240.00
Hot Dipped Galvanized
The Ultrawedge Anchor is used for heavyduty fastening applications where high pulloutvalues are required. The anchor and the holediameter are the same. The advanced designof the collar reduces the likelihood of theanchor “spinning”. Proper installation requirescleaning out the hole. Install using a torquewrench set to the suggested level as providedin the instruction sheet. The Ultrawedge isused in a wide variety of structural applications,including fastening sheet metal, steel,aluminum angles or wood to concrete. Pipe-hanging, tilt-ups, bridges, elevator equipment,conveyors and highway construction frequentlyrequire the wedge type anchor. The UltrawedgeAnchor is ideal for installing machinery, handrails, dock bumpers & storage racks, etc.Ultrawedge anchors are sold unassembled withthe appropriate nuts and washers.Meets GSA Spec, FF-S-325 Group II, Type 4,Class 1.
See page 16 for installation instructions.
*Thread length is measured from top end of anchor including Bull Nose head.
CARBON STEEL, HOT DIPPED GALVANIZED 303 & 316 STAINLESS STEEL
Porteous Fastener Company
Porteous Fastener Company
ITEMCODE
DIAMETER &LENGTH
MIN.EMBEDMENT
BOLTDIAMETER
BOX/CTNQTY.
WEIGHT (LBSPER 100)
ITEMCODE
DIAMETER &LENGTH
MIN.EMBEDMENT
BOLTDIAMETER
BOX/CTNQTY.
WEIGHT (LBSPER 100)
SA1413SA1422
1/4" X 1 3/8"1/4" X 2 1/4"
1"1"
3/16"3/16"
100/1000100/1000
2.243.58
ITEM DIAMETER & MIN. BOLT BOX/CTN WEIGHT (LBSCODE LENGTH EMBEDMENT DIAMETER QTY. PER 100)
SR1412 1/4" X 1 1/4" 1" 3/16" 100/1000 2.20SR1420 1/4" X 2" 1" 3/16" 100/1000 2.40SR1426 1/4" X 2 3/4" 1" 3/16" 100/1000 3.80
SR3824 3/8" X 2 1/2" 1 1/4" 5/16" 50/500 7.25
SH5614 5/16" X 1 1/2" 1" 1/4" 100/1000 4.02SH5624 5/16" X 2 1/2" 1" 1/4" 100/1000 5.76
SH3817 3/8" X 1 7/8" 1 1/4" 5/16" 50/500 7.04SH3830 3/8" X 3" 1 1/4" 5/16" 50/500 9.48SH3840 3/8" X 4" 1 1/4" 5/16" 50/500 12.00
SH1222 1/2" X 2 1/4" 1 1/2" 3/8" 25/250 13.20SH1230 1/2" X 3" 1 1/2" 3/8" 25/250 17.10SH1240 1/2" X 4" 1 1/2" 3/8" 25/250 20.40SH1260 1/2" X 6" 3" 3/8" 25/250 28.50
SH5822 5/8" X 2 1/4" 2" 1/2" 25/250 25.04SH5830 5/8" X 3" 2" 1/2" 25/250 32.70SH5842 5/8" X 4 1/4" 3 1/2" 1/2" 10/100 40.80SH5860 5/8" X 6" 3 1/2" 1/2" 10/100 55.00
SH3424 3/4" X 2 1/2" 2" 5/8" 10/100 43.60SH3442 3/4" X 4 1/4" 3 1/2" 5/8" 5/50 60.80SH3462 3/4" X 6 1/4" 3 1/2" 5/8" 5/50 86.00
Acorn Head
Flat Head
Round Head
Carbon Steel
304 Stainless Steel — Hex HeadITEMCODE
TENSION/SHEAR
DIAMETER &LENGTH
MIN.EMBEDMENT
BOLTDIAMETER
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
SH1413S 1300/1500 1/4" x 1 3/8" 1" 3/16" 100/1000 2.24
SH3817S 2400/3000 3/8" x 1 7/8" 1 1/4" 5/16" 50/500 7.04SH3830S 2400/3000 3/8" x 3" 1 1/4" 5/16" 50/500 9.48
SH1222S 4700/5200 1/2" x 2 1/4" 1 1/2" 3/8" 25/250 9.48SH1240S 4700/5200 1/2" x 4" 1 1/2" 3/8" 25/250 20.40
ITEMCODE
TENSION/SHEAR
DIAMETER &LENGTH
MIN.EMBEDMENT
BOLTDIAMETER
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
SF1430S 1300/1500 1/4" x 3" 1" 3/16" 100/1000 3.68
SF3840S 2400/3000 3/8" x 4" 1 1/4" 5/16" 50/500 12.00
304 Stainless Steel — Flat Head
The sleeve type rod hanger is assembled, and is typically usedfor attaching threaded rod of various diameters to brick, cinderblock, thin wall, marble or concrete.
SLEEVE TYPE ROD HANGERS
ITEMCODE
DIAMETER& LENGTH
DRILLDIAMETER
OPEN ENDDIA. OR ROD
MIN.EMBEDMENT
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
RH5614 5/16" X 1 1/2" 5/16" 1/4" 1" 50/500 7.35
RH3838 3/8" x 1 7/8" 3/8" 3/8" 1 1/4" 50/500 9.64
RH1212 1/2" x 2 1/4" 1/2" 1/2" 1 1/2" 25/250 18.40
RH5858 5/8" x 2 1/4" 5/8" 5/8" 2" 20/200 30.30
ITEMCODE
ANCHORSIZE
HOLEDIAMETER
THREADDEPTH
ANCHORLENGTH
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
D14 1/4" 3/8" 1/2" 1" 100/1000 2.88D38 3/8" 1/2" 13/16" 1 9/16" 100/1000 6.32D12 1/2" 5/8" 15/16" 2" 50/500 11.56D58 5/8" 7/8" 1 3/16" 2 1/2" 25/250 34.80D34 3/4" 1" 1 13/16" 3 1/8” 25/100 48.00
* Applies to carbon steel only.
*
ULTIMATE LOAD VALUES
1/4"3/8"1/2"5/8"3/4"
3"4"5"5"
3 1/2"
172831485120
1008011944
170038086876896815312
ANCHORDIAMETER
EMBED.DEPTH
f’c = 6000 psiTENSION (lbs.) SHEAR (lbs.)
The drop-in anchor is used in medium to heavy-duty applicationsin solid media such as concrete and stone. A flush, female anchor,the drop-in houses an internal plug which is held securely in placeeven when used in overhead applications. Using the setting toolprovided with each 100 anchors, the plug is driven to exactly theright depth, causing the anchor to expand. Drop-ins are frequentlyused for over-head applications, including hanging pipe, duct work,machinery, etc. Drop-ins are available in carbon steel and 303
stainless steel. Meets GSA specification FF-S-325, Group VIII, Type 1.See page 17 for installation instructions.
3/8" and 1/2" only
Hex Head
SF1413 1/4" x 1 3/8" 1" 3/16" 100/1000 2.24SF1420 1/4" x 2" 1" 3/16" 100/1000 2.40
SF1420T 1/4" x 2" Thresh. 1" 3/16" 100/1000 2.32SF1430 1/4" X 3" 1" 3/16" 100/1000 3.68SF1440 1/4" X 4" 1" 3/16" 100/1000 4.52
SF3826 3/8" X 2 3/4" 1 1/4" 5/16" 50/500 8.00SF3830 3/8" X 3" 1 1/4" 5/16" 50/500 9.48SF3840 3/8" X 4" 1 1/4" 5/16" 50/500 12.00SF3850 3/8" X 5" 2" 5/16" 50/500 13.60SF3860 3/8" X 6" 2" 5/16" 50/500 15.25
DROP-IN ANCHORSCarbon Steel, Stainless Steel, Setting Tool, Shorty Drop-In
ITEMCODE
ANCHORSIZE
HOLEDIAMETER
THREADDEPTH
ANCHORLENGTH
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
D14S 1/4" 3/8" 1/2" 1" 100/1000 2.88D38S 3/8" 1/2" 13/16" 1 9/16" 100/1000 6.32D12S 1/2" 5/8" 15/16" 2" 50/500 11.56D58S 5/8" 7/8" 1 3/16" 2 1/2" 25/250 34.80D34S 3/4" 1" 1 13/16" 3 1/8" 25/250 48.00
Drop-In — Stainless Steel
ITEMCODE
DIAMETER &LENGTH
MIN.EMBEDMENT
BOLTDIAMETER
BOX/CTNQTY.
WEIGHT (LBSPER 100)
* On select sizes.
*
Sleeve anchors are dependable for use in brick, cinder block, thin wall,marble, and concrete. One benefit is that the base material doesn’thave to be solid. The variety of head styles offers extra versatility. Anadded benefit is the ability to remove this anchor after installation.Sleeve anchors are used for anchoring window and door frames,thresholds, cabinets, theater seats, duct straps, dock bumpers,aluminum and steel angles, steel columns, etc. Meets GSA Spec, FF-S-325 Group II, Type 3, Class 3.
See page 16 for installation instructions.
10
SLEEVE ANCHORS, SLEEVE TYPE ROD HANGERS, DROP-IN ANCHORS
Porteous Fastener Company
Porteous Fastener Company
11
ITEMCODE
WEIGHT (LBS.PER EA.)
MT10 .07MT14 .17MT56 .28MT38 .43MT12 .66MT58 1.13
ITEMCODE
BOLT DIAMETER
HOLEDIAMETER
HOLE DEPTH
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
M10 10-24 3/8" 5/8" 100/1000 1.80M14 1/4-20 1/2" 7/8" 100/1000 4.34M56 5/16-18 5/8" 1" 100/1000 6.64M38 3/8 -16 3/4" 1 1/4" 50/500 12.72M12 1/2-13 7/8" 1 1/2" 50/250 16.58M58 5/8-11 1 1/8" 2" 25/125 38.16
ITEMCODE
WEIGHT (LBS.PER 100)
DT14 2.88DT38 6.32DT12 11.56DT58 34.80DT34 48.00
Setting ToolsTECHNICAL DATAThe tests below were performed by an independenttesting lab in accordance with ASTM E488-90. Valuesshown are average ultimate values and are offered only asa guide and are not guaranteed. A safety factor of 4 to 1or 25% is generally accepted as a safe working load.
ANCHORf’c = 3000 psiANCHOR/
DRILL DIA. SHEAR (lbs.)
M10M14M56M38M12
3/8"1/2"5/8"3/4"7/8"
9552125285052406000
12052060241041505000
ULTIMATE LOAD VALUES
TENSION (lbs.)
Setting Tool CONCRETE SCREWS
This caulking type machine screw anchor features azinc alloy cone with a lead ring. When set, using thesetting tool provided with each 100 anchors, it providesa quick setting in concrete, stone, and brick. Meets GSA specification FF-S-325, Group I, Type 1, Class 1.
The concrete screw provides fast, secure anchoring, utilizing ahardened screw with specially fashioned high and low threads that cutinto the properly sized hole and thread into concrete, masonry, brick,block, etc. This high quality screw has a corrosion resistant coating fordemanding environments. Installation is accomplished through the useof specially designed carbide bits (one provided free per box), andbecomes an even faster operation when used with the concrete screwdrive tool. See page 17 for installation instructions.
*Approvals on select sizes.*
*IMPORTANT NOTE:Due to the exacting nature of the Drop-In’s expansionrequirements, the manufacturer’s appropriate settingtool must be used for each size and type. Failure touse the correct tool could result in a fastening failure.
MACHINE SCREW ANCHORS
SHORTY DROP-INThe Shorty Drop-in is manufactured with a lip to allowfor use in deep holes or holes of questionable depth.The shorter length is perfect for shallow embedmentapplications in solid and hollow concrete, solid blockand stone. One D38ST setting tool is provided freewith every 100 pcs.
ITEMCODE
ANCHOR SIZE
HOLEDIAMETER
THREAD DEPTH
ANCHORLENGTH
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
D38Shorty 3/8" 1/2" 1/2" 3/4" 100/1000 4.2
ANCHOR SIZE
HOLE DIAMETER
EMBEDMENTDEPTH
ULTIMATE TENSIONLOAD (lbs.)
ULTIMATE SHEARLOAD (lbs.)
3/8" 1/2" 3/4" 1,936 2,115
ULTIMATE LOAD VALUESf’c = 4500 psi
TDT Complete Concrete Screw Installation Tool .6
Flat HeadITEMCODE
SCREW DIA.AND LENGTH
MINIMUMEMBEDMENT*
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
TF3112CTF3116CTF3122CTF3126CTF3132CTF3140CTF1412CTF1416CTF1422CTF1426CTF1432CTF1440CTF1450C
3/16" x 1 1/4"3/16" x 1 3/4"3/16" x 2 1/4"3/16" x 2 3/4"3/16" x 3 1/4"
3/16" x 4"
1/4" x 1 1/4"1/4" x 1 3/4"1/4" x 2 1/4"1/4" x 2 3/4"1/4" x 3 1/4"
1/4" x 4"1/4" x 5"
1"1 1/8"1 1/2"1 1/2"1 1/2"1 1/2"
1"1 1/4"1 1/2"
2"2"2"2"
100/1000100/1000100/1000100/1000100/1000100/1000
100/1000100/1000100/1000100/1000100/1000100/1000100/1000
0.841.201.361.601.962.18
1.361.742.202.602.963.684.58
Hex HeadITEMCODE
SCREW DIA.AND LENGTH
MINIMUMEMBEDMENT*
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
TH3112CTH3116CTH3122CTH3126CTH3132CTH3140CTH1412CTH1416CTH1422CTH1426CTH1432CTH1440CTH1450C
3/16" x 1 1/4"3/16" x 1 3/4"3/16" x 2 1/4"3/16" x 2 3/4"3/16" x 3 1/4"
3/16" x 4"
1/4" x 1 1/4"1/4" x 1 3/4"1/4" x 2 1/4"1/4" x 2 3/4"1/4" x 3 1/4"
1/4" x 4"1/4" x 5"
1"1 1/8"1 1/2"1 1/2"1 1/2"1 1/2"
1"1 1/4"1 1/2"
2"2"2"2"
100/1000100/1000100/1000100/1000100/1000100/1000
100/1000100/1000100/1000100/1000100/1000100/1000100/1000
0.81.201.521.601.962.18
1.401.742.202.603.183.684.58
ITEM CODE DESCRIPTION WEIGHT PER EACH (LBS)
CONCRETE SCREWACCESSORIES
Installation Tool Kit
MACHINE SCREW ANCHORS, CONCRETE SCREWS& ACCESSORIES
Porteous Fastener Company
Porteous Fastener Company
12
ITEMCODE
DIAMETER& LENGTH
HOLEDIAMETER
ULT. TENSIONLOAD VALUE
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
ITEMCODE
DIAMETER& LENGTH
HOLEDIAMETER
ULT. TENSIONLOAD VALUE
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
TB1820M 1/8" x 2" 3/8" 240 100/1000 1.44TB1830M 1/8" x 3" 3/8" 240 100/1000 1.72TB1840M 1/8" x 4" 3/8" 240 100/1000 2.06
TB3130M 3/16" x 3" 1/2" 430 100/1000 3.58TB3140M 3/16" x 4" 1/2" 430 100/1000 4.18
TB1430M 1/4" x 3" 5/8" 900 50/500 6.44TB1440M 1/4" x 4" 5/8" 900 50/500 7.44
ITEMCODE
FOR USE WITH DIAMETER& LENGTH
WEIGHT PER EACH (lbs.)
TS532 TH OR TF 3112C-3116C 5/32" x 3 1/2" .022
TM532 TH OR TF 3122C-3126C 5/32" x 4 1/2" .024
TL532 TH OR TF 3132C-3140C 5/32" x 5 1/2" .026
TS31 TH OR TF 1412C-1416C 3/16" x 3 1/2" .023
TM31 TH OR TF 1422C-1426C 3/16" x 4 1/2" .025
TL31 TH OR TF 1432C-1440C 3/16" x 5 1/2" .027
TXL31 TH OR TF 1450C 3/16" x 6 3/4" .040
BITS FOR CONCRETE SCREWSThe standard masonry drill bit
supplied with concrete screws features a black oxide finish, highquality carbide tip, and a split shank configuration, which fits properlyin the installation tool.
TOGGLE BOLTSMushroom Head, Round Head, Flat Heat, Acoustic
HAMMER DRIVE ANCHORSZinc Alloy, Zinc Alloy with Stainless Nails
Toggle bolts and the acoustical toggles listed below are used in hollow wall, plaster, hollow tile and block applications. Three head styles are available,
Mushroom, Round and Flat head. Thescrews are zinc plated and fully threaded. The heavy duty toggle wingsare zinc plated, with the appropriate sizing stamped on the body foreasy identification. All toggle bolts are sold unassembled. Meets GSA Spec FF-B-588 C, Type I, Class A, Style 1.
Mushroom Head
Round Head
ITEMCODE
DIAMETER& LENGTH
HOLEDIAMETER
ULT. TENSIONLOAD VALUE
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
TB1820F 1/8" x 2" 3/8" 240 100/1000 1.40TB1830F 1/8" x 3" 3/8" 240 100/1000 1.68TB1840F 1/8" x 4" 3/8" 240 100/1000 1.98
TB3130F 3/16" x 3" 1/2" 430 100/1000 3.42TB3140F 3/16" x 4" 1/2" 430 100/1000 3.98
TB1430F 1/4" x 3" 5/8" 900 50/500 6.12TB1440F 1/4" x 4" 5/8" 900 50/500 7.12
ITEMCODE
DIAMETER& LENGTH
HOLEDIAMETER
EYE DIAMETER
ULT. TENSIONLOAD
BOX/CTNQTY.
WEIGHT (LBS.PER 100)
TB1440A 1/4" x 4" 5/8" 1/4" 900 25/100 12.30TB1450A 1/4" x 5" 5/8" 1/4" 900 25/100 14.52
ITEMCODE
THREADSIZE
WINGLENGTH
HOLEDIAMETER
ULT. TENSIONLOAD
BOX/CTN.QTY.
WEIGHT (LBS.PER 100)
TW18 6-32 1 7/16" 3/8" 240 100/1000 0.76TW31 10-24 1 15/16" 1/2" 430 100/1000 1.66TW14 1/4 - 20 2" 5/8" 900 100/1000 2.80TW56 5/16 - 18 2 7/16" 7/8" 1030 50/500 4.48TW38 3/8 - 16 2 3/4" 1" 1090 50/500 7.20TW12 1/2 - 13 4 1/4" 1 1/4" 1200 25/100 14.00
Flat Head
AcousticalAvailable unassembled, the tie wire acoustical toggle bolts are usedprimarily for overhead applications. The winged end is inserted throughthe drywall, ceiling tile, etc., and expands behind that medium, whilethe 1/4" x 1 1/4" fender washer and hex nut act to secure the anchoron the exterior of the hole.
Heavy duty toggle wings are zinc plated, with theappropriate sizing stamped on the wing for easyidentification.
TOGGLE WINGS
The body of the hammer drive anchor ismade from high grade Zamac 3 zinc alloy(which provides you with high pulloutvalues). It is rustproof and designed to
virtually eliminate embrittlement which frequently occurs in lowergrades of zinc alloy. Good for applications in concrete, brick, block orstone, the hammer drive comes assembled and provides for a quickand easy fastening in medium and light duty jobs. Hammer drives havea mushroom head, are relatively tamperproof, and are available withboth the standard zinc plated steel and stainless steel nails dependingupon the application requirements. Meets GSA Spec. FF-S-325,Group V, Type 2, Class 3
TB1820R 1/8" x 2" 3/8" 240 100/1000 1.44TB1830R 1/8" x 3" 3/8" 240 100/1000 1.72TB1840R 1/8" x 4" 3/8" 240 100/1000 2.06
TB3120R 3/16" x 2" 1/2" 430 100/1000 2.98TB3130R 3/16" x 3" 1/2" 430 100/1000 3.58TB3140R 3/16" x 4" 1/2" 430 100/1000 4.18TB3150R 3/16" x 5" 1/2" 430 50/500 4.56TB3160R 3/16" x 6" 1/2" 430 50/500 5.56
TB1430R 1/4" x 3" 5/8" 900 50/500 6.44TB1440R 1/4" x 4" 5/8" 900 50/500 7.44TB1450R 1/4" x 5" 5/8" 900 50/500 8.40TB1460R 1/4" x 6" 5/8" 900 50/500 9.68
TB5630R 5/16" x 3" 7/8" 1030 25/250 10.72TB5640R 5/16" x 4" 7/8" 1030 25/250 12.08TB5650R 5/16" x 5" 7/8" 1030 25/250 13.60TB5660R 5/16" x 6" 7/8" 1030 25/250 15.36
TB3830R 3/8" x 3" 1" 1090 25/250 15.44TB3840R 3/8" x 4" 1" 1090 25/250 17.56TB3850R 3/8" x 5" 1" 1090 25/250 20.08TB3860R 3/8" x 6" 1" 1090 25/250 22.48
TB1240R 1/2" x 4" 1 1/4" 1200 10/100 35.40TB1260R 1/2" x 6" 1 1/4" 1200 10/100 49.60
ITEMCODE
ANCHOR. DIA.& LENGTH
HOLEDIAMETER
GRIPRANGE
BOX/CTN.QTY.
WEIGHT (LBS.PER 100)
H3107 3/16" x 7/8" 3/16" 0-1/8" 100/1000 1.15H1406 1/4" x 3/4" 1/4" 0-1/8" 100/1000 1.70H1410 1/4" x 1" 1/4" 1/8" - 1/4" 100/1000 2.00H1412 1/4" x 1 1/4" 1/4" 1/4" - 1/2" 100/1000 2.35H1414 1/4" x 1 1/2" 1/4" 1/2" - 3/4" 100/1000 2.65H1420 1/4" x 2" 1/4" 3/4" - 1 1/4" 100/1000 3.35H1430 1/4” x 3" 1/4” 1 5/8" - 2 1/8" 100/1000 4.70
Hammer Drives
CONCRETE SCREW BITS, TOGGLE BOLTS & WINGS, HAMMER DRIVE ANCHORS
Porteous Fastener Company
Porteous Fastener Company
13
ANCHOR f’c = 3000 psiHOLE
SIZEEMBEDMENT
DEPTH SHEAR (lbs.)LSS14LSS56LSS38LSS12LSS58LSL14LSL56LSL38LSL12LSL58
1/2"1/2"5/8"3/4"7/8"
1/2"1/2"5/8"3/4"7/8"
1"1 1/4"1 3/4"
2"2"
1 1/2"1 3/4"2 1/2"
3"3 1/2"
14501500160020054050
16001700186027756100
185025005500800011000
185025002610800013000
ULTIMATE LOAD VALUES
TENSION (lbs.)
Zinc Alloy with Stainless Steel NailsITEMCODE
ANCHOR. DIA.& LENGTH
HOLEDIAMETER
GRIPRANGE
BOX/CTN.QTY.
WEIGHT (LBS.PER 100)
H1410S 1/4" x 1" 1/4" 1/8" - 1/4" 100/1000 2.00H1412S 1/4" x 1 1/4" 1/4" 1/4" - 1/2" 100/1000 2.35H1414S 1/4" x 1 1/2" 1/4" 1/2" - 3/4" 100/1000 2.65H1420S 1/4" x 2" 1/4" 3/4" - 1 1/4" 100/1000 3.35
HWST For 1/8" & 3/16" 1.00 lbs.
ITEM DESCRIPTION WEIGHT PERCODE EACH (LBS)
Hollow Wall Anchor Setting Tool
HWD18S 1/8 Short 6-32 x 1 3/4" 5/16” 1 1/4" 1/8" x 1/2" 100/1000 1.40HWD18SH 1/8 Short 6-32 x 1 3/4" Hex 5/16” 1 1/4" 1/8" - 1/2" 100/1000 1.40HWD18L 1/8 Long 6-32 x 2 11/32" 5/16” 1 3/4" 5/8" - 7/8" 100/1000 1.78
HWD18SL 1/8 SLong 6-32 x 2 11/32" 5/16” 1 3/4" 1/8" - 13/16" 100/1000 1.82HWD18SLH 1/8 SLong 6-32 x 2 11/32" Hex 5/16” 1 3/4" 1/8" - 13/16" 100/1000 1.82
ITEM ANCHOR SCREW SIZE HOLE ANCHOR GRIP BOX/CTN WEIGHTCODE SIZE & LENGTH DIA. BODY RANGE QTY (LBS. PER
LENGTH 100)
Hollow Wall Drive Anchors
HW18XS 1/8 XShort 6-32 x 1" 5/16" 3/4" 1/16" - 1/4" 100/1000 0.95HW18S 1/8 Short 6-32 x 1 1/2" 5/16" 1 1/4" 1/8" - 1/2" 100/1000 1.24HW18L 1/8Long 6-32 x 2" 5/16" 1 5/8" 5/8" - 7/8" 100/1000 1.58HW18SL 1/8 SLong 6-32 x 2" 5/16" 1 3/4" 1/8" - 13/16" 100/1000 1.56HW18XL 1/8 XLong 6-32 x 2 1/2" 5/16" 2 1/4" 1 1/4" - 1 1/2" 100/1000 2.18
HW31S 3/16 Short 10-24 x 2 1/4" 3/8" 2 1/16" 1/8" - 5/8" 50/500 3.28HW31L 3/16 Long 10-24 x 2 3/4" 3/8" 2 1/2" 5/8" - 1 3/16" 50/500 4.03
HW14S 1/4 Short 1/4-20 x 2 1/4" 1/2" 2 1/16" 1/8" - 5/8" 50/500 4.68HW14L 1/4 Long 1/4-20 x 2 3/4" 1/2" 2 1/2" 5/8" - 1 3/16" 50/500 5.76
ITEM ANCHOR SCREW SIZE HOLE ANCHOR GRIP BOX/CTN WEIGHTCODE SIZE & LENGTH DIA. BODY RANGE QTY (LBS. PER
LENGTH 100)
The above tests were performed by an independent testing lab inaccordance with ASTM E-488-90. Values shown are average ultimatevalues and are offered only as a guide and are not guaranteed. A safetyfactor of 4 to 1 or 25% is generally accepted as a safe working load.
EMBEDMENT
1/4"3/4"1"
1 1/4"
110413731375
f’c = 4000 psi CONCRETETENSION (lbs.)
ULTIMATE LOAD VALUES
ANCHOR SHEAR (lbs.)
128913941399
LAG SHIELDSLag shields are designed for light to medium duty fastening inconcrete, mortar joint, masonry and brick. The lag shield isrustproof, and is used with a lag screw. The screw length can bedetermined by adding the length of the lag shield, the thicknessof material to be fastened plus 1/4", as the tip of the lag screwmust protrude out from the bottom of the anchor to insureproper expansion. In hard masonry, the short lag shield may beused to minimize drilling time. In softer masonry, the long lagshield will develop superior holding strength.
Meets GSA Spec. FF - S - 325, Group II, Type 1, Classes 1 & 2
Meets GSA Spec. FF - S - 325, Group II, Type 2, Class 2, Style 1
Short SizesITEMCODE
ANCHORSIZE
HOLEDIAMETER
ANCHORLENGTH
BOX/CTN.QTY.
WEIGHT (LBS.PER 100)
LSS14 1/4" 1/2" 1" 100/1000 2.58LSS56 5/16" 1/2" 1 1/4" 100/1000 3.00LSS38 3/8" 5/8" 1 3/4" 50/500 6.28LSS12 1/2" 3/4" 2" 25/250 10.16LSS58 5/8" 7/8" 2" 25/250 13.76
Long SizesITEMCODE
ANCHORSIZE
HOLEDIAMETER
ANCHOR LENGTH
BOX/CTN.QTY.
WEIGHT (LBS.PER 100)
LSL14 1/4" 1/2" 1 1/2" 100/1000 4.20LSL56 5/16" 1/2" 1 3/4" 100/1000 4.24LSL38 3/8" 5/8" 2 1/2" 50/500 9.36LSL12 1/2" 3/4" 3" 25/250 17.12LSL58 5/8" 7/8" 3 1/2" 25/250 21.45
The rustproof, zinc alloy single expansion anchor is used withmachine screws or machine bolts in concrete, brick or stone.The screw or bolt can be removed from the anchor, ifnecessary, and replaced, without materially effecting the holding power of the anchor.
SINGLE EXPANSION SHIELDS
SE14SE56SE38SE12SE58
1/2"5/8"5/8"7/8"1"
17602080231036005980
ULTIMATE LOAD
TENSION(lbs.)
ANCHOR/DRILL DIA.
ULTIMATE LOAD VALUES
ANCHORSHEAR
(lbs.)
2120320038008100
12,000
f’c = 3700 psi Hollow BlockTENSION
(lbs.)SHEAR
(lbs.)
833----
1215----
Technical Data
ITEMCODE
INTERNALDIAMETER
HOLEDIAMETER
ANCHORLENGTH
BOX/CTN.QTY.
WEIGHT (LBS.PER 100)
SE14 1/4" 1/2" 1 5/16" 100/1000 2.86SE56 5/16" 5/8" 1 1/2" 50/500 5.84SE38 3/8" 5/8" 1 1/2" 50/500 8.62SE12 1/2" 7/8" 2" 50/200 11.40SE58 5/8" 1" 2 5/8" 25/125 20.72
The above tests were performed by an independent testing lab in accordancewith ASTM E-488-90. Values shown are average ultimate values and are offeredonly as a guide and are not guaranteed. A safety factor of 4 to 1 or 25% isgenerally accepted as a safe working load.
Hollow Wall Anchors
Hollow Wall AnchorsThis anchor is designed to be used in thin materials such aswallboard, plaster, paneling, hollow block, etc. As the screw isturned in, the anchor expands, securing itself to the back of themedium. Once set, the screw may be removed as often asnecessary. For faster installation, the setting tool listed belowmay be utilized.
ZINC ALLOY HAMMER DRIVE ANCHORS, HOLLOW WALL ANCHORS,LAG SHIELDS, SINGLE EXPANSION SHIELDS
Porteous Fastener Company
Porteous Fastener Company
14
ITEMCODE
SIZE BOX/CTNQTY.
WEIGHT (LBS.PER 100)
EC14EC38
1/4"3/8"
100/1000100/1000
2.255.00
ITEMCODE
SIZE BOX/CTNQTY.
WEIGHT (LBS.PER 100)
N1406MN1410MN1414MN1420MN1430M
1/4" x 3/4"1/4" x 1"
1/4" x 1 1/2"1/4" x 2"1/4" x 3"
100/1000100/1000100/1000 100/1000100/1000
.48
.52
.821.09 1.5
CPA48BLB 3/16" x 3/4" 3/16" #4 - #6 - #8 BLUE 50,000 .07CPA610BXB 3/16" x 7/8" 3/16" #6 - #8 - #10 BLUE 1000 .10CPA610BLB 3/16" x 7/8" 3/16" #6 - #8 - #10 BLUE 40,000 .10CPA1012BX 1/4" x 1" 1/4" #10 - #12 RED 1000 .20CPA1012BXB 1/4" x 1" 1/4" #10 - #12 BLUE 1000 .20CPA1012BL 1/4" x 1" 1/4" #10 - #12 RED 20,000 .20
CPA1012BLB 1/4" x 1" 1/4" #10 - #12 BLUE 20,000 .20CPA1416BXB 5/16" x 1 3/8" 5/16" #14 - #16 BLUE 500 .40CPA1416BLB 5/16" x 1 3/8" 5/16" #14 - #16 BLUE 10,000 .40
ITEM DIAMETER & HOLE USE w/ COLOR PACKAGED WEIGHT (LBS.CODE LENGTH DIAMETER SCREW SIZES QTY. PER 100)
ITEMCODE
INTERNALDIAMETER
HOLEDIAMETER
ANCHORLENGTH
BOX/CTN.QTY.
WEIGHT (LBS.PER 100)
DE14 1/4" 1/2" 1" 100/1000 3.18DE56 5/16" 5/8" 1 1/4" 50/500 5.92DE38 3/8" 3/4" 1 1/2" 50/500 11.36DE12 1/2" 7/8" 2" 25/250 17.68DE58 5/8" 1" 2 1/4" 25/250 23.04DE34 3/4" 1 1/4" 2 7/8" 10/100 46.60
ITEM CONTENTS HOLE MASTER WEIGHT (LBS)CODE DIA. CTN. QTY. PER KIT
Meets GSA Spec. FF-S-325, Group II, Type 2, Class 2, Style 2
SPLIT-FAST ANCHORS (Flat Head)Split-fast anchors can be used in concrete, hard masonry andstone. Made of high grade steel with "memory", these anchorsare easily hammered into a predrilled hole and exert expansivepressure on the inner walls of the hole, creating a securefastening. Split fast anchors come in both flat and round headstyles. Note: Drilling hole depth 1/4" greater than over-all anchorlength allows split fast drive to be hammered flush with surfaceif fixture is removed.
Used primarily for light duty fastening in concrete, brick,masonry or drywall, the conical anchor's ridged body helpseliminate spinning while the screw is being inserted. Note: All“BX” items contain anchors packaged in 100 piece bags.
CONICAL PLASTIC ANCHORS
PAK610B
PAK1012BandPAK1012
PAK1416B
3/16"
1/4"
5/16"
25
25
25
.58
1.02
1.15
100 CPA610s (Blue), 100 #6 x 1" pan combosheet metal screws, 1 (0ne) 3/16" x 4"carbide masonry drill bit.
100 CPA1012s (Blue), 100 #10 x 1" pancombo sheet metal screws, 1 (0ne) 1/4" x 4"carbide masonry drill bit. (For Red anchorsspecify PAK1012)
50 CPA1416s (Blue), 50 #14 x 1 1/4" pancombo sheet metal screws, 1 (0ne) 5/16" x4" carbide masonry drill bit.
Eye couplings are fastened to expansion anchors orthreaded rod that has already been installed. They can beused for hanging pipe, fixtures or other assemblies.Combined with a wedge or sleeve anchor, they can be usedin a variety of tie-down applications.
The double expansion anchor is manufactured of rustproof zincalloy, and is used with machine screws or machine bolts, andworks well in soft masonry and mediums of questionablestrength. As the "double" sets, the two opposing wedges pulltowards each other, expanding the full length of the anchorbody. Proper expansion requires that anchor, prior to setting,protrudes slightly above surface plane.
DOUBLE EXPANSION SHIELDS
The standard plastic anchor kit contains redor blue conical plastic anchors, combinationphillips/slotted hardened sheet metal screws
and a carbide masonry bit. The contents are housed in a sturdy plasticbox, suitable for pegboard hanging. Kits can be prepared to order witha variety of other anchors and screws, on request and availability ofmaterial.
PLASTIC ANCHOR KITS
EYE COUPLINGS
NYLON NAIL ANCHORSThe Nylon Nail Anchor is composed of a nylon body and a steel pinand is expanded by striking the pin with a hammer. The anchor can beused for light duty fastening in concrete block, brick, stone andwallboard. GSA Spec. FF-S-325, Group V, Type 2, Class 4.
ITEMCODE
DIAMETER& LENGTH
HOLEDIAMETER
MINIMUMEMBEDMENT
BOX/CTN.QTY.
WEIGHT (LBS.PER 100)
SD1414F 1/4" x 1 1/2" 1/4" 1 1/8" 100/1000 2.36SD1420F 1/4" x 2" 1/4" 1 1/8" 100/1000 2.50SD1424F 1/4" x 2 1/2" 1/4" 1 1/8" 100/1000 3.60SD1430F 1/4" x 3" 1/4" 1 1/8" 100/1000 4.50SD1434F 1/4" x 3 1/2" 1/4" 1 1/8" 100/1000 4.78SD1440F 1/4" x 4" 1/4" 1 1/8" 100/1000 5.75
ITEM SCREW SIZE HOLE BOX/CTN WEIGHT (LBSCODE SIZE DIAMETER QTY. PER 100)
MN4 #3 - #4 5/32" x 3/4" 1/8" 100/9600 .05MN5 #4 - #6 3/16" x 1" 3/16" 100/9600 .07MN6 #8 - #10 1/4" x 1 3/16" 3/16" 100/9600 .12MN7 #10 1/4" x 1 3/8" 1/4" 100/4800 .19MN8 #10 - #12 5/16" x 1 1/2" 5/16" 100/4800 .28MN10 1/4" - 5/16" 3/8" x 2" 3/8" 50/2400 .40MN12 3/8" 1/2" x 2 3/8" 7/16" 25/1200 .96MN14 7/16" 9/16" x 2 3/4" 9/16" 15/720 1.47MN16 1/2" 5/8" x 3 1/8" 5/8" 10/480 2.20MN20 9/16" - 5/8" 3/4" x 3 9/16" 3/4" 5/240 4.60
MUNGO NYLON PLUGS
“MN” - NYLON PLUGMUNGO TENSION TEST CHART f’c = 4000 psi
ANCHOR SIZEULTIMATE LOAD (lbs.)
ANCHOR /DRILL DIAMETER
FASTENERUSED
MN7
MN8MN10MN12
1/4"
5/16"
3/8"7/16"
#10 Screw
1/4" LAG
5/16" LAG
3/8" LAG
448
453792
1258
Mungo Nylon Plugs are not to be confused with standardplastic anchors. These easy to install high performanceplugs are specially engineered to outperform manymechanical anchors at a fraction of the cost. Use with eithersheet metal screws or lag screws for applications inconcrete, brick, block or stone.
DOUBLE EXPANSION SHIELDS, SPLIT-FAST ANCHORS, CONICAL PLASTICANCHORS & KITS, NYLON ANCHORS, EYE COUPLINGS, MUNGO PLUGS
Porteous Fastener Company
Porteous Fastener Company
15
MJPK 50 Zinc Jet Plugs 25 1 1/4 lb. ea.50 #8 x 1 1/4 Sheet Metal Screws pieces
1 #2 Phillips BitPacked in a plastic box
MFJK 50 Nylon Jet Plugs 25 .6 lb. ea50 #8 x 1 1/4 Sheet Metal Screws pieces
1 #2 Phillips BitPacked in a plastic box
JET PLUGS
JET PLUG KITS
ITEMCODE
MATERIAL LENGTH BOX/CTNQTY.
WEIGHT (LBS.PER 100)
MJP Zinc 1 1/2" 100/1000 1.46MFJ Nylon 1 3/16" 100/1000 1.5
ANCHOR1/2” (lbs.)
FASTENERUSED
MJP #8 80 110
DRYWALL
5/8” (lbs.)
“MJP” - JET PLUG
The above tests were performed by an independent testing lab in accordancewith ASTM E-488-90. Values shown are average ultimate values and are offeredonly as a guide and are not guaranteed. A safety factor of 4 to 1 or 25% isgenerally accepted as a safe working load.
MFJK- Mungo Nylon Jet Plug Kit
ITEM DESCRIPTION CASE WEIGHTCODE QTY. EA.
This “EZ style” anchor is offered in zinc and nylon and is today’spopular solution to anchoring in drywall. Simply screw the Jet Plug into the wall by using a #2 Phillips bit until flush withsurface. Attach item to be fastened using a #8 x 1 1/4" screw.
ITEMCODE
SIZE BOX/CTNQTY.
WEIGHT (LBS.PER 100)
MU6 1/4"x 1 7/16" 100/1000 .22MU8 5/16" x 2" 50/500 .44
MU10 3/8" x 2 3/8" 25/250 .80
MUNGO UNIVERSAL PLUG
FASTENERUSED
MU-6 1/4" #8* 258
ULTIMATE LOAD (lbs.)Hollow Block
TensionANCHOR/DRILL DIA.
“MU” - UNIVERSAL PLUG
ANCHORShear
MU-8
MU-10
5/16"
3/8"
#14
5/16"**
785
1619
432
1785
1895* Sheet metal screw ** Lag screw
This Nylon Plug “knots up” when expanded and isespecially suited for applications in plaster or drywall.
MUNGO NYLON PLUG FEATURESMungo should not be confused with plastic anchors used forlightweight anchoring. Many metal mechanical anchor uses havebeen replaced by Mungo nylon plugs. Other competing plugsmay look similar but are not manufactured with the sameengineered benefits. Review the following features to understandwhy Mungo plugs are the best plugs available in today’s market.
1. Polyamide 6 NylonThe nylon used in Mungo plugs is of top quality and has beentested for long periods under the most extreme conditions. It is impact proof and tolerant to temperatures of -104°F to+176°F (-40°C to +80°C).
2. Knock-In ProtectionThe Mungo plug will not expand too early due to its in-builtknock –in protection. Knock-in protection allows the user thefreedom to tap the plug complete with screw into the drilled holewithout fear of the plug expanding before it is completely in thehole. Knock-in protection also allows the plug to be adjustedback and forth in drilled hole.
3. Stabilization PointsThe Mungo plug is firmly connected by means of stabilizationpoints. These points prevent the plug from breaking open whilebeing inserted into the hole thus ensuring positive expansion ofthe plug when the screw is fitted.
4. Screw GuideThe Mungo plugs come with a built-in screw guide, whichensures positive parallel tracking of the screw down the entirelength of the plug.
5. M-TeethThe M-Teeth, stabilization points and screw guides jointlyproduce a 100% radial expansion of the plug.
6. Offset block profileOffset block profile ensure that when the plug expansion begins,the plug holds firmly against the drilled hole.
7. FinsThe Mungo fins are purposely designed to prevent the plugfrom falling out of the drilled hole in overhead applications.Further, they have the effect of preventing the plug from turningwhile the screw is being fitted.
8. Screw typesMungo plugs will accept all standard screw types, thus allowingthe user flexibility in selecting the right screw for the job. Coarsethread screws are recommended.
JET PLUGS & KITS • MECHANICAL ANCHORING SYSTEMS
Porteous Fastener Company
Porteous Fastener Company
16
Anchor Diameter Minimum Maximum
1. Always wear safety glasses.2. Follow the drill manufacturer’s safety instructions.3. Use only solid carbide-tipped bits meeting the ANSI B212.15-1994 tip diameter as shown below in Table 1.4. Drill the hole perpendicular to the work surface. To assure full holding power, do not ream the hole or allow the drill to wobble.5. Drill the hole as deep as the full length of the anchor, but not closer than two anchor diameters to the bottom (opposite surface of the concrete).6. Clean the hole using compressed air and a wire brush. A clean hole is necessary for proper performance.
7. Assemble the washer and nut on the anchor so the nut is recessed slightly below the head of the anchor.8. Tap the anchor through the fixture (must be 1/8" larger than diameter of the anchor) and into the hole making sure the nut and washer rests solidly against the fixture or tap the anchor into the hole and then place bracket over the anchor.9. Tighten the nut with a torque wrench to the proper torque shown in Table 2.10. If spinning occurs, pull up on the anchor using the claw end of a hammer and then torque.
1. Always wear safety glasses.2. Follow the drill manufacturer’s safety instructions.3. Use only solid carbide-tipped bits meeting the ANSI B212.15-1994 tipdiameter.4. Drill the hole perpendicular to the work surface. To assure full holdingpower, do not ream the hole or allow the drill to wobble.5. Drill the hole as deep as the full length of the anchor.6. Clean the hole using compressed air and a wire brush. A clean hole isnecessary for proper performance.
7. Place anchor through fixture (must be 1/8” larger than diameter of theanchor) and into hole making sure the nut and washer rest solidly againstthe fixture, or tap into the hole and then place bracket over the anchor(under nut and washer).8. Tighten the nut with a torque wrench to the proper torque shown in thetable below.
Anchor Diameter Torque Range
Table 1. Drill Bit Tolerances - ANSI B212.15-1994 Table 2. Torque Requirements
WEDGE ANCHORS
SLEEVE ANCHORS
ANCHOR DIA. TORQUE
Torque Requirements
1/4"5/16"3/8"1/2"
5 ft. - lbs.10 ft. - lbs.
60 ft. - lbs.90 ft. - lbs.
30 ft . - lbs.15 ft. - lbs.
5/8"3/4"
1/4" .260" .268"3/8" .390" .398"7/16" .458" .468"1/2" .520" .530"9/16" .582" .592"5/8" .650" .660"3/4" .775" .787"7/8" .905" .917"1" 1.030" 1.042"
1 1/4" 1.285" 1.300"
1/4" 5 - 10 ft. - lbs.3/8" 25 - 30 ft. - lbs.
1/2" 50 - 60 ft. - lbs.5/8" 75 - 90 ft. - lbs.
3/4" 150 - 175 ft. - lbs.7/8" 200 - 250 ft. lbs.
1" 250 - 300 ft. lbs.1 1/4" 400 - 450 ft. lbs
INSTALLATION INSTRUCTIONS
Porteous Fastener Company
Porteous Fastener Company
17
1. Always wear safety goggles.2. Follow the drill manufacturer’s safety instructions.3. Use only solid carbide-tipped bits meeting the ANSI B212.15-1994tip diameter.4. Drill the hole perpendicular to the work surface. To assure full holdingpower, do not ream the hole or allow the drill to wobble.5. Drill the hole as deep as full length of anchor, but not closer than twoanchor diameters to the bottom (opposite surface of the concrete).
6. Clean the hole using compressed air. A clean hole is necessary forproper performance.7. Drop anchor in hole and tap flush with surface (anchor can be set flushwith base material or sub-set).8. Using setting tool, set the drop-in with several sharp hammer blowsuntil expansion plug bottoms out in hole.9. Position the fixture.10. Insert bolt and tighten.
1. Always wear safety glasses.2. Follow drill manufacturer’s safety instructions.3. Use only solid carbide-tipped bits meeting NSI B212.15-1994 tip diameter.4. Drill the hole perpendicular to the work surface. To assure full holdingpower, do not ream the hole or allow the drill to wobble.
5. Drill the hole a minimum of 1/4" deeper than the maximumembedment depth of the anchor (minimum anchor embedment should be 1").6. Place anchor through fixture into drilled pilot hole and drill in with hex socket or phillips bit.
DROP-IN ANCHORS
Drop-In
Setting Tool
CONCRETE SCREW
INSTALLATION INSTRUCTIONS
Porteous Fastener Company
Porteous Fastener Company
© Copyright 10/2006, Porteous Fastener Company, Inc.
Porteous Fastener Company 1040 Watson Center Rd.
Carson, CA 90745
1-800-I BUY PFC (1-800-428-9732) Fax: 310-834-0871
www.porteousfastener.com
Porteous Fastener Company
top related