pippy slippers by pip lincolne
Post on 10-Mar-2016
229 Views
Preview:
DESCRIPTION
TRANSCRIPT
meetmeatmikes.com :: pattern by pip lincolne :: don’t sell my pattern :: you can sell things you make from this pattern :: but much nicer to make them as gifts for people you love :: we don’t have to sell everything!
Pag
e1
How To Make
These slippers are made to fit YOUR foot. You crochet them in one piece, fit them to
size over the last few rows and then sew them together down the back of the ankle to
close the heel (and seal the deal!) If you are new to making slippers or socks, then
these are a really great way to get started. You can vary the stitches once you are
confident with this pattern! You can add lots of stripes... or you can make them all
one colour. Make them your own! If you have very narrow feet, use a smaller hook and
finer yarn : these are a wide fit... but they are just SLIPPERS!
I use Australian/UK Crochet terms in the project. Stitches used are Chain Stitch and Half Treble
Crochet [which is the same as Half Double Crochet in US terminology] There are videos on
YouTube to teach you how to Half Treble Crochet (HTR). This project works in rounds. The right
side of your work is always facing outwards, (except for the last 8 rows, when you need to turn your
work at each row.)
You Need::
4mm crochet hook
8ply (DK) Yarn in a few colours
Scissors
Yarn Needle
How To Half Treble Crochet
(HTR for short!) : Yarn Over :
insert hook into stitch: pull
your yarn through to the front
of your work : yarn over again,
pull top loop through bottom
three loops on hook
meetmeatmikes.com :: pattern by pip lincolne :: don’t sell my pattern :: you can sell things you make from this pattern :: but much nicer to make them as gifts for people you love :: we don’t have to sell everything!
Pag
e2
In Your First Colour let’s begin : I used Blue/Green (pictures below!)
a) Make a slip knot and chain 4 :: Join with a slip stitch to form a ring. Chain up 2.
b) Now, Half Treble Crochet 9 times into the ring you made.
Once you have 9 HTRs, join your round up with a slip stitch into the 2nd original chain
you made to close the circle tightly.
c) Chain 2 :: Half Treble crochet into the base of the chain stitches you just made.
Now Half Treble crochet twice into each stitch of the previous round.
Close the round with a slip stitch into the 2nd original chain stitch once more.
d) Chain 2 :: HTR once into the base of these two chain stitches.
HTR once into each stitch of the previous round. Slip stitch the round closed
e) Chain 2 :: HTR once into the base of those two chain stitches. Now follow the
sequence between the following asterisks all the way around : *Half Treble into the
next 3 stitches, then TWO Half Treble into the next stitch* all the way around and
fasten off.
First steps :: with the Blue Green (the toe of the slipper!)
Let’s change colour. Just tie your next colour to one of the HTRs, being sure it’s tied
through TWO loops for extra security. Then poke your hook through the stitch, just
under where you have tied your yarn on, and pull the new yarn to the front with your
crochet hook, to form a loop on your hook.
meetmeatmikes.com :: pattern by pip lincolne :: don’t sell my pattern :: you can sell things you make from this pattern :: but much nicer to make them as gifts for people you love :: we don’t have to sell everything!
Pag
e3
Note :: I changed to cream for this part of our slipper (below)
a) Chain up 2 :: HTR once into the base of the 2 chain stitches. Now HTR once into
each stitch of the previous round. Close the round with a slip stitch into the 2nd (the
highest!) original chain. This helps to form a nice neat round. Keep your yarn pulled
very taut when you do this for best results.
b) Chain up 2 :: HTR once into the base of the 2 chain stitches. *HTR one into the
next stitch, then HTR twice into the next stitch* repeat all the way around the round,
and then close with a slip stitch just like we did before.
c) Chain up 2 :: * HTR once into the base of the 2 chain stitches. HTR once into each
stitch of the previous round. Close with a slip stitch, as per usual! *
d) Repeat above for the THREE ROWS in TOTAL. Note that in a crochet pattern,
anything between * and * is to be repeated!! Nice work. Fasten off your yarn leaving
a ‘tail’ of around 20cm.
Let’s change colour again! Do this by tying your new coloured yarn between two
stitches of the previous round, then hooking a loop through with your crochet hook
(a). Position the tied on yarn quite close to where you fastened off your last colour, so
all your bumpy joins are kinda lined up on your finished slipper. See my left slipper
above? I did not line my joins up, so it’s a bit messy and bumpy. My right slipper is
much neater, because I kept my joins aligned a bit more and concealed them in the
inside foot part of my slipper. (They are hiding!) Be sure to leave a long yarn tail of
around 20cm to make things easier to neaten up later.
meetmeatmikes.com :: pattern by pip lincolne :: don’t sell my pattern :: you can sell things you make from this pattern :: but much nicer to make them as gifts for people you love :: we don’t have to sell everything!
Pag
e4
Note :: I changed to yellow for this part of the slipper.
a) Chain 2. HTR once into each stitch of the previous
round slip stitching the round closed at the end of
each round.
b) Repeat the above for a total of THREE ROWS.
Fasten off your work neatly, leaving a long tail once
more.
Change colour by tying your new yarn between two
stitches of the previous round and hooking a loop
through with your crochet hook. Add your new colour
so that it lines up with where you added your previous
colour. This way all our joins will be in one line and
we can hide them along the side of our slipper! Again,
leave a long tail.
Note :: I changed back to grey for this part.
a) Chain 2. HTR once into each stitch of the previous
round slip stitching the round closed at the end of
each round.
b) Repeat the above for a total of THREE ROWS.
Now, change colours again just like we did before,
roughly in line with your previous colour changes. I
am going to change back to yellow.
meetmeatmikes.com :: pattern by pip lincolne :: don’t sell my pattern :: you can sell things you make from this pattern :: but much nicer to make them as gifts for people you love :: we don’t have to sell everything!
Pag
e5
a) Now. Flatten your slipper out so all your loose tails and
bumps from colour changes are running down the left
side. Note where the middle of the front of your slipper is
(where my crochet hook is laying).
b)We need to leave a six stitch gap at this midpoint (or
roughly in the middle). I’ve marked it by tying my grey
yarn back on at one stitch, and looping some green yarn
through at the other point. This helps me to know where
NOT to stitch. I must NOT stitch in the six stitches
between those two markers! Nope! Otherwise my foot
may not go in to this slipper. And it may as well become a
pencil case!
Right. I have changed back to yellow for this next part.
a) Chain 2. Now Half Treble once into each stitch of the
previous round. Slip stitch each round closed neatly. Be sure to
keep your stitches taut as you start each round.
b) Repeat for a TOTAL of THREE ROWS.
Change colours once more, lining up with your previous colour
changes for neatness. I changed to grey again.
Look, I changed to grey. It’s my last colour change. I am going
to finish my slipper in grey. Let’s go.
a)Chain 2.
b)Now we need THREE more rows of HTR, remembering to slip
stitch your round closed and chain up twice to start each row.
Once done, slip stitch the final round closed and fasten off your
work.
meetmeatmikes.com :: pattern by pip lincolne :: don’t sell my pattern :: you can sell things you make from this pattern :: but much nicer to make them as gifts for people you love :: we don’t have to sell everything!
Pag
e6
a)Let’s finish the back part of the slippers. Chain 2
and HTR all the way around until you reach that
seventh stitch (the one which I marked with the
green yarn!)
b) Now stop. Chain up two and turn your work.
These two chains are going to be counted as our first
HTR of the row. So then HTR into each of the
stitches along this row, chaining up two and turning
your work to start a new row.
c) Keep on HTRing and 2 chaining along for SIX
ROWS IN TOTAL
d) After Row Six pop your foot in to your nearly
slipper and pull your slipper tightly towards the back
of your foot. It probably won’t quite fit you yet,
unless you have teensy feet. Now continue
crocheting enough rows to make them fit you nicely.
Make sure they fit firmly.) I am crocheting 8 rows in
total : so just another 2 rows after Row Six (my foot is
a size 39!) Remember you are always missing those
six stitches and turning at the end of each row. Once
your slipper is the right length fasten off your yarn
leaving a nice long tail of around 30cm.
meetmeatmikes.com :: pattern by pip lincolne :: don’t sell my pattern :: you can sell things you make from this pattern :: but much nicer to make them as gifts for people you love :: we don’t have to sell everything!
Pag
e7
a) Turn your slipper out the wrong way. Sew the back seam closed (on the outside for
extra comfort) with matching yarn and a yarn needle.
b) Now sew in your ends threading them with the yarn needle and weaving them in
and out of your work a couple of centimetres one way, and then the other. Snip the
loose yarn close to your work (careful!) and stretch your work so that the snipped end
disappears.
Turn your slipper the right way out and try it on! It looks a bit like a squat bootie, but
it will stretch nicely to fit (if you fitted it correctly!) Chortle at your cleverness and
the cosiness of your toes! Now you have to make another! Sheesh. I mean, YAY!
top related