ordic fiberglass, inc.• fiberglass pedestals resist fertilizers, salt air, and ultraviolet attack....
Post on 20-May-2020
25 Views
Preview:
TRANSCRIPT
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.com Page 4108/17
ORDIC FIBERGLASS, INC.
Pedestals Height Top LidBase
HeightSuggested
Burial Depth Connectors
PSP-151530-MG-L6350 30” 15” x 15” x 15” 15” 12” 3 Lay-in, 6 port, 350MCM
PSP-151530-MG-L6600 30” 15” x 15” x 15” 15” 12” 3 Lay-in, 6 port, 600MCM
PSPF-101538-MG-X 38” 10” x 15” x 17” 35.5” 16” None
PSPF-101538-MG-L6350 38” 10” x 15” x 17” 35.5” 16” 3 Lay-in, 6 port, 350MCM
PSPF-101538-MG-4L6350 38” 10” x 15” x 17” 35.5” 16” 4 Lay-in, 6 port, 350MCM
PSPF-101538-MG-6500 38” 10” x 15” x 17” 35.5” 16” 3, 6 port, 500MCM
PSPF-101538-MG-46500 38” 10” x 15” x 17” 35.5” 16” 4, 6 port, 500MCM
PSPS-101544-MG-X 44” 10” x 15” x 22” 35.5” 16” X-None, however, available with connectors like the PSPF Series
PSP-151530-MG-L6350
PSP-151530-MG-L6600
PSPF-101538-MG-L6350
PSPS-101544-MG-X
PSP-151530-MG-CE
PSPF-101538-MG-CE
Pedestals, Secondary
Features: PSP-151530-MG-L6350 or PSP-151530-MG-L6600• Rust free materials and stainless steel hardware.• Copolymer polypropylene pedestals are manufactured by an injection molding
process with UV stabilized material. Polypropylene pedestals resist fertilizers, salt air, and ultraviolet attack.
• The green pigment is permanently molded into the copolymer polypropylene and can-not peel or rust.
• “WARNING”, “ELECTRIC”, is molded into the pedestal top for easy identification. • Top cover has room for labels in the front. • The top is secured to the base by a flange molded into the rear of the pedestal top
and a penta-head bolt and hasp on the front. • Accommodates three 6 port 350MCM or 600MCM connectors. • Clear plastic covers included when connectors are ordered.• Optional cable entrance cover available. • All locking hardware is stainless steel.
Pedestals, Plastic
Features: PSPF Series & PSPS Series• Rust free materials and stainless steel hardware.• Linear low density polyethylene material is UV stabilized.• “ELECTRIC” is molded into the pedestal top for easy identification. • There is an 8” x 10” label area molded in. • Accommodates three or four 6 port 350 or 500 MCM connectors. • Clear plastic covers included when connectors are ordered. • All locking hardware is stainless steel. • Suggested burial depth up to the molded in “GROUND LINE”. • Molded step design resists deflection when buried.• Optional cable entrance cover available. • PSPF Series has a flared bottom design allows for ample cable training, increased
stability in a variety of soil conditions, and pedestal stacking.
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.comPage 42 08/17
ORDIC FIBERGLASS, INC.
Pedestals Lock HeightBase
Height
Suggested Burial Depth
PSP-151530-MG Horizontal 30” 15” 12”PSP-91330-MG Horizontal 30” 12” 9” PSP-91336-MG Horizontal 36” 18” 15”PSPB-161912/18-MG Base Only 12”-18”PSPB-212115-MG Base Only 15”PSPT-151515-MG Top Only 15”PSPT-91318-MG Top Only 18”Pedestals convertible to Hand Holes
PSPX-151530-MG Vertical 30” 15” 12”PSPX2-151530-MG Double 30” 15” 12” PSPXB-212115-MG Base Only 15”PSPXT-151515-MG Top Only 15”PSPX-91330/36-MG Vertical 30”-36” 12”-18” 9”-15” PSPX2-91330/36-MG Double 30”-36” 12”-18” 9”-15” PSPXB-161912-18-MG Base Only 12”-18”PSPXT-91318-MG Top Only 18”PSPX domed pedestals are convertible to hand holes. The vertical locking mechanism bolts to the base flange. The domed cover can be removed and a flat cover (HHC-2121 or HHC-1619), can be attached to the base. HHC2-2121 and HHC2-1619 can be used as covers for the PSPX2 pedestals, PSPXT-plastic secondary pedestal convertible top, X-convertible, T-Top, PSPXB-plastic secondary pedestal convertible base, B-Base, PSPX-plastic secondary pedes-tal convertible to a hand hole.
PSP Lock: • Horizontal lock; penta-
head bolt enters a plastic receiver in base to hold in place.
• Hasp is riveted to base.• Hasp tab has hole for pad
locking lid to base.PSPX Lock:• Vertical single locking
mechanism bolts to the base flange.
PSPX2 Lock:• Vertical double locking
with a bit on the lid and base to allow pad-lock shaft to slide through for padlocking.
PSP Lock
PSPX Lock
PSPX2 Lock
PSP-151530-MG
PSP-91330-MG PSPX-91330-MG PSPX2-91330-MG
PSP-91336-MG PSPX-91336-MG
PSPX-151530-MG PSPX2-151530-MG
PSPX2-91336-MG
PSP-91330-MG-CE
Cable Entrance Cover: • Black plastic cover can be
installed inside a secondary pedestal for a cable entrance cover.
• Maximum cable hole dimension is 2” OD.
• Includes mounting hardware.
Features: • Rust free materials and stainless steel hardware.• Copolymer polypropylene pedestals are manufactured by an
injection molding process with UV stabilized material. Polypropylene pedestals resist fertilizers, salt air, and ultraviolet attack.
• The green pigment is permanently molded into the copolymer polypropylene and can-not peel or rust.
• “WARNING”, “ELECTRIC”, is molded into the pedestal top for easy identification.
• Top cover has room for labels in the front. • The top is secured to the base by a flange molded into the rear of the
pedestal top and a penta-head bolt and hasp on the front. • Optional cable entrance cover available.• Ribs and steps are molded into the pedestal for rigidity. This design resists
deflection in a buried position and ensures the base and lid a unified connection after servicing.
Pedestals, PSP Series
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.com Page 4308/17
ORDIC FIBERGLASS, INC.
PSPX-101830-MG
PSPX2-101830-MG
PSPXT-101815-MG
PSPX2T-101815-MG
PSPX Lock(Penta-Head)
PSPX2 Lock(Hasp & Penta-Head)
Pedestals L x W x H
Suggested Burial Depth Locking System
PSPX-101830-MG 10 x 18 x 30 12” Penta-HeadPSPXT-101815-MG (Domed Lid) 10 x 18 x15 PSPX2-101830-MG 10 x 18 x 30 12” Hasp & Penta-HeadPSPX2T-101815-MG (Domed Lid) 10 x 18 x15
Features: • Rust free materials and stainless steel hardware.
• Copolymer polypropylene pedestals are manufactured by an injection molding process with UV stabilized material. Polypropylene pedestals resist fertilizers, salt air, and ultraviolet attack.
• The green pigment is permanently molded into the copolymer polypropylene and can not peel or rust.
• “WARNING”, “ELECTRIC”, is molded into the pedestal top for easy identification.
• Top cover has room for labels in the front.
• The top is secured to the base by a flange molded into the rear of the pedestal top and a penta-head bolt and hasp on the front.
• Optional cable entrance cover available.
• Ribs and steps are molded into the pedestal for rigidity. This design resists deflection in a buried position and ensures the base and lid a unified connection after servicing.
Pedestals, PSP Series
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.com Page 443/19
ORDIC FIBERGLASS, INC.
PedestalTop
Dimension HeightAbove Ground
Below Ground
Locking System
P-50-MG 8” x 8” 44” 24” 20” HaspP-50-P-MG 8” x 8” 44” 24” 20” Penta-HeadPR-50-MG 8” x 8” 44” 24” 20” Hasp &
Penta-HeadP-55-MG 8” x 8” 44” 34” 10” Hasp
P-55-P-MG 8” x 8” 44” 34” 10” Penta-Head
PR-55-MG 8” x 8” 44” 34” 10” Hasp & Penta-Head
Stakes Description DimensionP-51 Fiberglass Anchor 19” x 2” x 2”P-52 Galvanized Steel Stake 48” Long
Hasp Lock Penta Head Lock
Hasp & Penta Head Lock
Pedestals, P-50 Series
P-50-MG
P-50-MG-P-52
P-50-P-MG PR-50-MG
PR-50-P-51-MG
P-55-MG P-55-P-MG PR-55-MG
Features: • Rust free SMC and stainless steel hardware.• The P-50 and P-55 Series are manufactured of
compression molded fiberglass (SMC).• Fire retardant and UV additives are permanently
molded in throughout the laminate.• Pigment is permanently molded into the fiberglass and
the fiberglass does not peel, providing a maintenance free pedestal for many years.
• Fiberglass pedestals resist fertilizers, salt air, and ultraviolet attack.
• Available in Munsell Green color.• Two sizes of Nordic pedestals, for installation with
anchoring devices, are available for above ground housing of cable splices.
• The top section is removable for easy access to cables.
• Stakes are available for added stability when installed.• Recessed penta-head locking is an option. Installed PR-50 Installed PR-55
Fabricators of Quality Fiberglass Products for the Electric Utility Industry21415 US Highway 75 NW · P.O. Box 27 · Warren · Minnesota · 56762Ph: (218) 745-5095 · Fx: (218) 745-4990 · www.nordicfiberglass.comPage 45 3/19
ORDIC FIBERGLASS, INC.
Pedestal HeightTop Cover
DimensionsLid
HeightBase
HeightAbove Ground
Below Ground
Locking System
PRMC-150-MG 30” 9” x 14” x 18” 18” 12” 21” 9” P-109PRMC-190-MG 36” 9” x 14” x 18” 18” 18” 21” 15” P-109
PRMC-190-MGPRMC-150-MG
Cable Entrance Cover:
• Black plastic cover can be installed inside a secondary pedestal for a cable entrance cover.
• Maximum cable hole dimension is 2” OD.
• Includes mounting hardware.
PRMC-150-MG
Pedestals, PRMC SeriesFeatures:
• Rust free SMC and stainless steel hardware.• PRMC series is manufactured of compression-molded fiberglass (SMC). • Fire retardant and UV additives are permanently molded in throughout the
laminate.• Pigment is permanently molded into the fiberglass and the fiberglass does not
peel, providing a maintenance free pedestal for many years.• Fiberglass pedestals resist fertilizers, salt air, and ultraviolet attack.• Available in Munsell Green color.• Stainless steel and aluminum hardware provide long term protection against
rust.• “ELECTRIC” is molded in raised lettering on the top lid.• A 3” flange around the perimeter provides stability when buried.• Optional cable entrance cover available.• P-109 locking assembly for safety.
top related