mud cattm 40e - apex envirocare aqua barriers & sediment
Post on 16-Oct-2021
3 Views
Preview:
TRANSCRIPT
Additional Services: • Onsite Training • After-sales support • Custom designs available • Rental Program
Contact Information:Liquid Waste Technology, LLC1750 Madison AvenueNew Richmond, WI 54017 USA
Ph: 800-243-1406Ph: (715) 246-2888Fax: (715) 246-2573
Email: sales@lwtdredge.com
www.lwtdredge.com
For over 30 years, LWT has been a leading provider of electric dredges. The Mud CatTM 40E is the preferred dredge to removeaccumulated solids and sediment from storage basins and lagoons for unparalleled, economically e�cient results. Our Mud CatTM 40E dredges have been successfully launched in various applications such as:
• Agricultural Lagoons • Industrial Pond Maintenance • Environmental Pond Maintenance • Municipal Water Plant Maintenance
The Mud CatTM 40E is a one-truck transportable, electric powered, radio remote controlled dredge equipped with the best 40 HPsubmersible pumps on the market. The Mud CatTM 40E is built with reliable and quality components for dependable long-term use and considered easy to operate. There are only four movingmechanical parts on the dredge.
The Mud CatTM 40E can also be equipped with a PLC (programma-ble logic controller) to provide control over the dredge’s functions,resulting in a state-of-the-art automated dredging system for cost e�ective low maintenance operation. Our automated functions can include options such as:
• Auto Sense® - Automatically stops dredge from forward travel • Bottom Sense® - Automatically follows the bottom contours • Solid Sense® - Automatically maintains delivery of constant solid density
Contact your local LWT sales representative or visit our website at www.lwtdredge.com to �nd out how LWT can support you with your next project. We also o�er rental dredges for short-termapplications.
Mud CatTM 40E
www.lwtdredge.com
General:
Length (O.A.) 23 ft - 1 in (7.03 m)
Width (O.A.) 8 ft - 2 in (2.5 m), Shipping Width 7 ft - 6 in (2.3m)
Height (O.A.) 6 ft - 10 in (2.08 m)
Weight 5,800 lbs. (2,630 kg) dry
Draft 16 in (.40 m)
Floatation: Pontoons--Two 28 in Dia x 20 ft (.71 m Dia x 6.09 m) 10 Gauge (3.4 mm) Steel
CutterAssembly:
Mud Shield Semi-Enclosed; Anti-Turbidity
Drive System Two (2) Low speed High Torque Motors
Auger Diameter10 in (254 mm) without Cutter Knives15-1/4 in (387 mm) with Cutter Knives
Auger Pitch 9 in (228 mm)
Auger Flighting 3/8 in (9.5 mm)
Speed Fixed at 60 RPM
Cutter Knives Detachable Heat-Treated Blades
Auger Torque 3,600 in-lbs. (410 N-m)
WorkingCapacity:
Cut 7 ft-6 in (2.3 m) wide
Operating Depth 14 ft (4.26 m) Maximum
Slurry Pump:
Electric Driven 40 HP (30 kW) Submersible Slurry Pump w/ High Chrome 450 Brinell volute and impeller (Other material options available)
Centrifugal Vortex Impeller Max Solids Diameter 4 in (101.6 mm)
Suction Diameter 6 in (152.4 mm)
Discharge Diameter 4 in (101.6 mm)
Nominal Pump Performance900 GPM (204 m3/hr) against 50 ft (15.24 m) Head Up to 56 yds3/hr (42 m3/hr) of Production at 30% solids contentResults May Vary.
Propulsion:
Double Sheave Hydraulic Driven Winch 10 in (254 mm)
Traverse Speed 0 - 30 FPM (0 -9.41 m/min) Maximum Forward & Reverse
Average Cutting Speed 8 -12 FPM (2.44 to 3.66 m/min)
Wire Rope Diameter 3/8 in (9.5 mm)
Ladder Hoist:Hydraulic Winch with a Maximum Line Pull of 4000 LBS First Layer
Line Speed 10 FPM (3.04 m/min)
Hydraulic Power Unit:
10 HP (7.45 kW ) Electrical Driven Hydraulic Power Unit
35 Gallons (132 liters) at full mark
Circuit One Auger, Travel, and Hoist Winch
Control System: Wireless Radio Remote Control
Slurry Pump – On / Speed;Auger – On; Travel – Forward / Off / Reverse / Speed;Hoist – Up / Off / Down
ElectricalSystem:
Electrical Requirement 460 V - 3 Phase - 60 Hz - 70 FLA 380 V - 3 Phase - 50 Hz - 90 FLA
Power Consumption: 39 kWh
Note:Specifications Subject To Change Without Notice.
Optional configuration quoted upon request
Mud CatTM 40E Electric Dredge
top related