moulding selection guide $5 w.m. - avs windows ltd. · baseboards are usually thinner than the...
Post on 20-Aug-2020
6 Views
Preview:
TRANSCRIPT
Style • Comfort • Elegance
$5
2010www.mouldingandmil lwork.com
Moulding Selection Guide
ARCHITRAVES: In cl assical architecture, it described the main beam resting on the tops of the columns. Today it is often used as a decorative moulding for ornamentation or finishing at the top of windows and doors.
BASEBOARDS: Baseboards are placed along the wall at the floor. They should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing.
BUILD-UPS: Combining two or more moulding profiles to create a new or custom look. Also called stacking, build-ups make it easy to create the look of custom made trimwork without the high cost.
CASING: Casings define the overall character of a room and are often the most visible part of the trim. They are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings.
CROWNS: Crowns are placed along the wall at the ceiling. They come in a wide range of patterns and sizes. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to your room.
FINISH BOARDS: Finish Boards come in either S4S (Surfaced 4 Sides) or S3S (Surfaced 3 Sides) and are used for a multitude of purposes including shelving, window liner, bases, casing, etc.
PANEL MOULDS: Panel Moulds are used to frame wall paneling and add an accent to your walls. Often used in furniture construction.
RAKE MOULD: Rakes are often used as crowns. In fact, they are sometimes called “solid crowns”.
WAINSCOT: Trimwork installed in the area below a chair rail. Numerous options are available including raised panel, shadow box and beaded. Combined with a chair rail and baseboard, Wainscoting creates a dramatic look to any room.
WINDOW STOOL: Also called window sill, a Window Stool is the surface installed below the sash of a window. Trim installed under window stool creates a distinctive look and adds a decorative touch.
1
2
3
4
5
6
7
8
9
10
Table of Contents
1 Illustration/Glossary
3 MouldingGallery
13 FinTek
19 GreenBuildingInitiative
20 SperoEco-wiseMDF
26 UltraliteSupercoatMDF
48 PrimedFJPine
60 Poplar
64 VGDouglasFir
70 Hemlock
78 Oak
82 SheetGoodsS4S&Wainscot
87 CorporateMap
88 AraucoPlySandedACXPine
GLOSSARY OF TERMSBASE SHOES: Base shoes are primarily used to trim flooring materials and are often used in combination with a traditional baseboard to conceal variations between the flooring and the base. However, this versatile profile works great to solve numerous trimming needs.
BATTENS/OPEN TRIM: A Batten/Open Trim is a narrow strip of wood used to cover joints or as decorative vertical members over plywood or wide boards.
BEADED CEILING: A popular profile used often as wainscot paneling. Combined with a chair rail or cap mould and a baseboard, beaded ceiling makes a distinctive wainscot package.
BRICKMOULDS: A Brickmould is mainly used as exterior casing around doors. 2 inches is the most common size, however, 1-1/2 and 1-1/4 inch sizes are available. Brickmoulds can also be used in place of a crown, and as a transition under window sills.
BULLNOSE: A term used to describe the eased edges of trim and stops. A single bullnose stop would have one eased edge and a square edge back. A double bull nose stop would have two eased edges.
CHAIR RAILS: Chair Rails are practical as well as decorative. Applied to a wall, from 24 to 48 inches up from the floor, they protect the wall from scuffs and dents from the backs of chairs as well as adding a beautiful accent to any room.
CORNERS: Corners are used to protect the outside edges of the wall from damage and abrasion. Corners come in a wide variety of sizes and detailing.
COVES: Coves are commonly used to soften the transition on inside corners but may be used for a wide range of applications.
DENTIL: A moulding pattern with a series of closely spaced rectangular blocks and spaces. Used especially in classic architecture.
DOOR STOPS: The Door Stop mouldings are attached to the door jamb on both sides and at the top. It is where the door comes to a rest when it is closed stopping the door from moving any further, and covering the gap that would otherwise appear between the door and the jambs.
FULL ROUNDS: Full Rounds are used for numerous purposes and projects. Some of the more common uses are closet poles, curtain rods and towel rods.
HALF ROUNDS: A cross section of a Half Round looks like a half circle and is used primarily as decorative trim. It works well as a trim piece for wall paper or to add a decorative pattern to flat panels. This profile can also be used to put a rounded edge on various shelving.
HANDRAILS: Handrails provide safety and support.
QUARTER ROUNDS: Quarter Rounds come in several sizes and serve a variety of functions. They are most often used with baseboards.
RETURN: Term used to indicate the method of carrying a mouldings detail from the front of the moulding back to the wall. Generally a 45 degree cut is made to the front of the long moulding and an opposite 45 is cut on a small piece to carry the detail to the wall.
SCREEN MOULD: A very versatile profile; Screen Mould fits a wide variety of needs and uses. Traditionally used to hold mesh screening into wood screens, it also works well as edge trim on various shelving or wood trim for wall paper etc.
3 8
910
4
5
6
7
1
2
410 BDL11/16”x2-1/4” Hemlock 811/16”x2-1/4” Ultralite RL11/16”x2-1/4” LDFPrimed PCS
PROFILE
PROFILESIzES
PROFILESPECIES
PIECES
RAnDOMLEnGTH
BUnDLECOUnT
MO
ULD
ING
GA
LLE
RY
CeilingTrim
Door&WindowTrim
MantelTrim
WallTrim
Door&FloorTrim
1 - CASInG=5352 - CROWnBUILDUP=1843 - CROWnBUILDUP=7124 - CROWnBUILDUP=4095 - OPEnInGTRIM=9532
1 - BASEBOARD=1612 - CROWn=413 - BASEBOARD=1614 - CHAIRRAIL=2975 - WAInSCOTCAP=8506 - BASEBOARD=163
12
3
4
5
6
1
3
2
4
5
MOULDING GALLERY
1 - CROWn=MFPU472 - BASEBOARD=MFPU6183 - LATTICE=MP32964 - RAKEMOULD=MP32445 - S4S=MFPU1046 - BASEBOARD=MFPU6187 - STOP = MP3290
1 - CROWn=MFPU432 - ARCHITRAVE=MFPU50103 - S4S=MFPU4924 - BASEBOARD=MFPU1615 - PLInTHBLOCK=PRMPB3436
1
3
2
5
4
3
6
7
4
5
1
2
MOULDING GALLERY1
1
2
4
5
3
4
8
5
7
6
2
3
1 - CROWn=MFPU412 - BEDMOULD=MFPU51/S4S=MFPU1063 - PAnELMOULD=MFP95324 - CASInG=MFPU0035 - S4S=MFPU1066 - CHAIRRAIL=MFP8507 - BEADEDPLYWOOD = MFP2228 - BASEBOARD = MFPU108
1 - CROWn=MFPU432 - ARCHITRAVE=MFPU50303 - S4S=MFPU1044 - PLInTHBLOCK=PRMPB34365 - BASEBOARD=MFPU163
MOULDING GALLERY
11
2
4 3
5
6
3
67
4
5
2
1 - CROWn=5122 - BASEBOARD=4973 - CROWn=32484 - S4S=1055 - CASInG=4336 - CASInG=4337 - BASEBOARD=497
1 - CROWn=452 - CASInG=0033 - BASESHOE=5314 - S4S=1x45 - CROWn=32406 - BASEBOARD=166
MOULDING GALLERY
1 1
2
3
3
4
2
1 - CROWn=MFSP472 - CASInG=MFSP1043 - S4S=MFSP1044 - BASEBOARD = MFSP106
BUILDInGGREEnWITH... PRE-FInISHEDMOULDInGS
1 - CROWn=MTEK7122 - CASInG=MTEK5353 - BASEBOARD=MTEK545
Pre-Finished Moulding Solution
FinTek™ PRE-FInISHEDMOULDInGSOLUTIOn
FinTek™ products are pre-painted with a professionally smooth and durable finish. All you have to do is install, touch-up and enjoy. It is the ideal choice for both do-it-yourselfers and professional installers.
www.mouldingandmillwork.com/fintek
Installs With Ease
• Smooth Professional Finish
• Washes Easily
• Saves Time & Money
• Environmentally Responsible
Installs with Ease
1. CUT & INSTALL
2. TOUCH UP
3. ENJOY
Pre-Finished Moulding Solution
Cut your FinTek™ mouldings to length with the compound miter saw and install using a finishing nailer.
Prior to filling of nail holes we suggest thoroughly cleaning and removing all dust and debris from the moulding surfaces. In addition make sure all tools and applicators are clean and free of debris.
Fill all holes with FinTek™ colour matched wax fill stick. Build up a small amount of wax over each hole to ensure it is completely filled.
Look for visible seams and gaps and fill with FinTek™ colour matched putty. Press putty into the seams and gaps until the putty fills the void.
Return back to the filled nail holes and with firm pressure scrape the excess wax and putty off with the FinTek™ plastic scraper card making sure not to remove the wax and putty from the hole.
Apply a small bead of FinTek™ colour matched caulking over shadow lines and seams between the wall and moulding. Follow all instructions on the tube.
Finally go back and touch up any areas as needed with the FinTek™ colour matched spray enamel making sure to protect thesurrounding area from overspray.
SUPERIOR DURABILITY!
POLAR WHITECOLOUR MATCHEDTOUCH-UPACCESSORIES
PATENT PENDING
• Coloured Enamel• Finishing Putty• Coloured Caulking• Wax Fill Stick• Scraper Card
Pre
-Fin
ish
ed M
ou
ldin
g S
olu
tio
n
THEPRE-FInISHEDMOULDInGSOLUTIOn.•SavesTime•SavesMoney•EliminatesMess•SmoothProfessionalFinish•EnvironmentallyResponsibleChoice
PATENT PENDING
www.mouldingandmillwork.com/fintek
1615
CasingsCasingsdefinetheoverallcharacterofaroomandareoftenthemostvisiblepartofthetrim.Theyareusedprimarilytocoverthegapbetweendrywallandthedoororwindowframe.Casingsaregenerallythickerthanthebasemouldings.
ALL SIZES NOMINAL
003 BDL18mmx3-1/4˝ FinTek 4
356 BDL12mmx2-1/4˝ FinTek 6
411 BDL18mmx3˝ FinTek 4
535 BDL18mmx3-1/2˝ FinTek 4
492 BDL12mmx2-1/2˝ FinTek 6
Baseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
Baseboards
494 BDL12mmx3-1/4˝ FinTek 4
496 BDL1/2˝x3-1/2˝ FinTek 4
498 BDL1/2˝x5-1/2˝ FinTek 4
623 BDL12mmx3-1/4˝ FinTek 4
618 BDL15mmx5-1/4˝ FinTek 4
FinTek™MOULDInGSFinTek™MOULDInGS
17 18
712 BDL5/8˝x4-1/2˝ FinTek 4
Baseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
Baseboards
206 BDL15mmx5-1/4˝ FinTek 4
545 BDL15mmx5˝ FinTek 4
412 BDL15mmx4-1/4˝ FinTek 4
Crownsareplacedalongthewallattheceiling.Theycomeinawiderangeofpatternsandsizes.Crownssoftenthetransitionfromwalltoceilingwhileaddingadistinctivelookandcharmtoyourroom.
ALL SIZES NOMINAL
Crowns
512 BDL15mmx5-1/4˝ FinTek 4
205W BDL15mmx4-1/8˝ FinTek 6
47 BDL9/16˝x4-1/2˝-16´ FinTek 4
FinTek™MOULDInGSFinTek™MOULDInGS
SPERO ECO-WISEMDFMOULDInGS
SPERO ECO-WISEMDFMOULDInGS
Contains no urea-formaldehydeMeets CARB Phase II requirements
100% recycled wood fiberharvested from responsibly managed forests
Manufactured domestically
Platinum Prime™ premium finish
Qualifies for LEED™ credits
Professional grade MDF mouldings and boards and eco-friendly too! www.mouldingandmillwork.com/spero
Green Building InitiativeMOULDING & MILLWORK INC., AND OUR AFFILIATED BUSINESSES, ARE COMMITTED
TO SUSTAINABLE FORESTRY PRACTICES IN ALL OF OUR OPERATIONS.
To this end we have undertaken significant steps to achieve our Chain of
Custody certification from Scientific Certification Systems (SCS), an independent
certifier of Forest Stewardship Council (FSC) chain-of-custody certification and
other environmental and sustainability claims. A total of 16 of our operations
throughout North America now hold Independent Certificate of Achievement
from SCS, Registration number SCS-I-002-COC.
In addition, four of our facilities hold Chain of Custody certification from
SCS, in accordance with the rules of the Forest Stewardship Council (FSC),
Registration number SCS-COC-00710. Products distributed from these facilities
have been harvested from forests that meet stringent environmental, social and
economic standards. This includes distribution of mouldings and millwork in
solid wood lineal pine, fingerjoint lineal pine, and MDF.
Moulding & Millwork, looking to the future, has joined the US Green Building
Council (USGBC). The US Green Building Council, in conjunction with
the Canada Green Building Council, are working to “transform
the way buildings are designed, built and operated, enabling an
environmentally and socially responsible, healthy, and prosperous built
environment that improves the quality of life in communities”.
The USGBC has developed the LEED Green Building Rating System. LEED,
Leadership in Energy and Environmental Design, has established credible and
consistent standards for sustainability in the built environment, using a point
rating system for construction projects.
Moulding & Millwork, through our manufacturing facilities and affiliates, have
the ability to provide products that may contribute to LEED rating points in the
following areas:
• Materials & Resources, 4.1, 4.2, 5.1, 5.2, 7
• Indoor Environmental Quality, 4.4
To help ensure future generations of having sustainable forest resources,
Moulding & Millwork is working closely with the Canadian Standards Association
(CSA), the Sustainable Forestry Initiative (SFI), & the Forest Stewardship Council
(FSC) on timberlands throughout Canada. Our goal is to provide 100% of
material from certified forests in all of our operations in North America.
FOR ADDITIONAL INFORMATION ON OUR GREEN BUILDING INITIATIVE, PLEASE VISIT OUR WEBSITE AT: www.mouldingandmillwork.com
FPO
21 22
CasingsCasingsdefinetheoverallcharacterofaroomandareoftenthemostvisiblepartofthetrim.Theyareusedprimarilytocoverthegapbetweendrywallandthedoororwindowframe.Casingsaregenerallythickerthanthebasemouldings.
ALL SIZES NOMINAL
472 BDL15mmx2-1/2˝ SperoEcoMDF 4
492 BDL1/2˝x2-1/2˝ SperoEcoMDF 4
514 BDL1/2˝x5-1/4˝-16´ SperoEcoMDF 6
494 BDL1/2˝x3-1/4˝ SperoEcoMDF 4
BaseboardsBaseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
411 BDL18mmx3˝-15´ SperoEcoMDF 6
1208 BDL16mmx2-1/2˝-14´ SperoEcoMDF 6
412 BDL15mmx4-1/4˝-16´ SperoEcoMDF 6
SPERO ECO-WISEMDFMOULDInGSSPERO ECO-WISEMDFMOULDInGS
23 24
ArchitravesInclassicalarchitecture,anarchitravedescribedthemainbeamrestingonthetopsofthecolumns.Todayitisoftenusedasadecorativemouldingforornamentationorfinishingatthetopofwindowsanddoors.
ALL SIZES NOMINAL
Crownsareplacedalongthewallattheceiling.Theycomeinawiderangeofpatternsandsizes.Crownssoftenthetransitionfromwalltoceilingwhileaddingadistinctivelookandcharmtoyourroom.
ALL SIZES NOMINAL
Crowns
E2E ProfilesE2E(Eased2Edges)profilesareavailableinadditionalwidthsandthicknessesuponrequest.
ALL SIZES NOMINAL
1X2
1X3
1X4
1X5
1X6
1X7
1X8
1X10
1X12
2X2
2X3
2X4
2X6
2X8
2X10
2X12
4X4
1/2X2
1/2X3
1/2X4
1/2X5
1/2X6
1/2X8
SPE
RO
EC
OM
DF
Finish Lumber (S4S)Spero Eco MDFContainsnourea-formaldehyde;meetsCARBPhaseIIrequirements;qualifiesforLEED™credits;100%recycledwoodfiberharvestedfromresponsiblymanagedforests.
47 BDL9/16˝x4-1/2˝-16´ SperoEcoMDF 6
546MI BDL1-1/4˝x5-1/2˝-16´ SperoEcoMDF PCS
5000 BDL30mmx3-3/4˝-16´ SperoEcoMDF 4
514 BDL1/2˝x5-1/4˝-16´ SperoEcoMDF 6
472 BDL1/2˝x2-1/2˝-16´ SperoEcoMDF 4
492 BDL1/2˝x2-1/2˝-16´ SperoEcoMDF 4
494 BDL1/2˝x3-1/4˝-16´ SperoEcoMDF 4
51 BDL15mmx3-1/4˝-16´ SperoEcoMDF 6
SPERO ECO-WISEMDFMOULDInGSSPERO ECO-WISEMDFMOULDInGS
ULTRALIGHT SUPERCOAT MDFMOULDInGS
ULT
RA
LITE
SU
PER
CO
AT
ULTRALITE SUPERCOAT MDFMOULDInGS• LightWeight
• InstallswithEase
• SuperiorPaintability
• SuperiorWorkabilty®
A GREEN BUILDING-COMPLIANT ALTERNATIVEMoulding&MillworkisproudtobeleadingthewayinprovidingalowemissionGreenBuilding-compliantsolutiontoMDFmouldingsandboards.Utilizingleadingedgeresintechnologythatcontainsnourea-formaldehyde,SPERO™productsaredesignedtomeetorexceedthemoststringentenvironmentalemissionsstandardsintheWorldincludingCaliforniaAirResourcesBoard(CARB)PhaseIIrequirements(HCHOEmission:≤0.05PPM*).Inaddition,SPERO™productsaremadefrom100%recycledwoodfiber(SCScertified)thatwasoriginallyharvestedfromresponsiblymanagedforests(SFIcertified).*ASTME-1333
A Green Alternative to MDF for a Healthy Home•Low-emissionGreenBuilding-compliantsolutiontoMDFqualifiesforLEED™credit.ThisproductwillqualifyforLEED™creditasa“LowEmittingMaterial”undertheindoorairqualityprovisionEQ4.4,for“RecycledContent”underMR4.1and4.2
•Leadingedgeresintechnologythatcontainsnourea-formaldehyde
•MeetsorexceedsthemoststringentenvironmentalemissionsstandardsintheworldincludingCaliforniaAirResourcesBoard(CARB)PhaseIIrequirements(HCHOEmission:0.05PPM).
A Sustainable Product for a Healthy Planet•SPERO™ismadefrom100%RecycledWoodFiber(SCSCertified)thatwasoriginallyharvestedfromresponsiblymanagedforests(SFICertified)
•SPERO™qualifiesforLEED™creditfor“RecycledContent”,whenapplicablefor“Local/RegionalMaterials”underMR5.1andMR5.2.
The Highest Quality Mouldings Now Available in Green•SPERO™productsaremilledinMoulding&Millwork’squalitydrivenMDFmanufacturingfacilitiesinboththeUnitedStatesandCanada.
•PlatinumPrime™smoothpaintandgofinish
•Smoothmachinedprofilesandedges
•Precisetolerancestandards
27 28
3122 BDL25mmx3-1/2˝-15´ Ultralite 8
3121 BDL15mmx2-3/4˝-15´ Ultralite 10
003 BDL18mmx3-1/4˝-15´ Ultralite 6
004 BDL11/16˝x3-1/2˝-15´ Ultralite 6
8233 BDL15mmx3-1/4˝-15´ Ultralite 10
535 BDL18mmx3-1/2˝-15´ Ultralite 6
139 BDL30mmx3-3/4˝-15´ Ultralite 4
002 BDL18mmx2-3/4˝-15´ Ultralite 8
128 BDL1-3/16x4˝-16´ Ultralite 4
CasingsCasingsdefinetheoverallcharacterofaroomandareoftenthemostvisiblepartofthetrim.Theyareusedprimarilytocoverthegapbetweendrywallandthedoororwindowframe.Casingsaregenerallythickerthanthebasemouldings.
ALL SIZES NOMINAL
CasingsCasingsdefinetheoverallcharacterofaroomandareoftenthemostvisiblepartofthetrim.Theyareusedprimarilytocoverthegapbetweendrywallandthedoororwindowframe.Casingsaregenerallythickerthanthebasemouldings.
ALL SIZES NOMINAL
356 WM BDL15mmx2-1/4˝-14´ Ultralite 6
356 BDL9mmx2-1/4˝-14´ MDFPrimed 1012mmx2-1/4˝-14´ Ultralite 16
ULTRALITE SUPERCOATMDFMOULDInGSULTRALITE SUPERCOATMDFMOULDInGS
29 30
8063 BDL18mmx3-1/4˝-15´ Ultralite 6
411A BDL18mmx2-3/4˝-15´ Ultralite 6
411 BDL18mmx3˝-15´ Ultralite 6
410 BDL18mmx2-1/4˝-14´ Ultralite 10
1208 BDL16mmx2-1/2˝-14´ MDFPrimed 6
MFPU382 BDL3/4˝x6˝-16´ Ultralite PCS
MFPU383 BDL3/4˝x7-3/4˝-16´ Ultralite PCS
MFPU381 BDL3/4˝x4˝-16´ Ultralite PCS
CasingsCasingsdefinetheoverallcharacterofaroomandareoftenthemostvisiblepartofthetrim.Theyareusedprimarilytocoverthegapbetweendrywallandthedoororwindowframe.Casingsaregenerallythickerthanthebasemouldings.
ALL SIZES NOMINAL
CasingsCasingsdefinetheoverallcharacterofaroomandareoftenthemostvisiblepartofthetrim.Theyareusedprimarilytocoverthegapbetweendrywallandthedoororwindowframe.Casingsaregenerallythickerthanthebasemouldings.
ALL SIZES NOMINAL
908 BDL15mmx3-1/4˝-14´ Ultralite 7
907 BDL15mmx2-1/4˝-14´ Ultralite 10
ULTRALITE SUPERCOATMDFMOULDInGSULTRALITE SUPERCOATMDFMOULDInGS
31 32
MFPU420 BDL11/16˝x2-3/4˝-14´ Ultralite 6
MFPU403 BDL5/8˝x3˝-14´ Ultralite 6
MFPU8037 BDL3/4˝x2-3/4˝-14´ Ultralite 10
MFPU8039 BDL3/4˝x3-1/2˝-16´ Ultralite 6
MFPU8081 BDL5/8˝x3-1/4˝-16´ Ultralite 6
MFPU8075 BDL3/4˝x3˝-14´ Ultralite 4
546MI BDL1-1/4˝x5-1/2˝-16´ Ultralite PCS
544MI BDL1˝x3-1/2˝-16´ MDFPrimed PCS
CasingsCasingsdefinetheoverallcharacterofaroomandareoftenthemostvisiblepartofthetrim.Theyareusedprimarilytocoverthegapbetweendrywallandthedoororwindowframe.Casingsaregenerallythickerthanthebasemouldings.
ALL SIZES NOMINAL
Casingsdefinetheoverallcharacterofaroomandareoftenthemostvisiblepartofthetrim.Theyareusedprimarilytocoverthegapbetweendrywallandthedoororwindowframe.Casingsaregenerallythickerthanthebasemouldings.
Inclassicalarchitecture,anarchitravedescribedthemainbeamrestingonthetopsofthecolumns.Todayitisoftenusedasadecorativemouldingforornamentationorfinishingatthetopofwindowsanddoors.
ALL SIZES NOMINAL
Casings & Architraves
5000 BDL30mmx3-3/4˝-16´ Ultralite 4
5010 BDL30mmx4-1/4˝-16´ Ultralite 4
ULTRALITE SUPERCOATMDFMOULDInGSULTRALITE SUPERCOATMDFMOULDInGS
MFPU421 BDL11/16˝x3-1/4˝-16´ Ultralite 6
33 34
5020 BDL30mmx5-1/4˝-16´ Ultralite 2
5030 BDL30mmx6-1/4˝-16´ Ultralite 2
ArchitravesInclassicalarchitecture,itdescribedthemainbeamrestingonthetopsofthecolumns.Todayitisoftenusedasadecorativemouldingforornamentationorfinishingatthetopofwindowsanddoors.
ALL SIZES NOMINAL
8234 BDL15mmx5-1/2˝-16´ Ultralite 4
8243 BDL12mmx4-1/4˝-16´ Ultralite 6
3140 BDL9mmx3-1/4˝-14´ MDFPrimed 10
Baseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
Baseboards
205T BDL12mmx3-7/8˝-16´ Ultralite 6
205W BDL15mmx4-1/8˝-16´ Ultralite 6MFPU5025 BDL
1-3/16˝x5-3/4˝-14´ Ultralite 6
ULTRALITE SUPERCOATMDFMOULDInGSULTRALITE SUPERCOATMDFMOULDInGS
35 36
310 BDL5/8˝x4-1/8˝-16´ Ultralite 6
206 BDL15mmx5-1/4˝-16´ Ultralite 4
207 BDL15mmx7-1/4˝-16´ Ultralite 4
309 BDL5/8˝x3-1/4˝-16´ Ultralite 6
Baseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
BaseboardsBaseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
Baseboards
8910 BDL9mmx3-7/8˝-16´ Ultralite 12
545 BDL15mmx5˝-16´ Ultralite 4
612 BDL5/8x7-1/4˝-16´ Ultralite 4
653 BDL9mmx3-1/4˝-14´ MDFPrimed 10
ULTRALITE SUPERCOATMDFMOULDInGSULTRALITE SUPERCOATMDFMOULDInGS
37 38
8263 BDL15mmx6-1/2˝-16´ Ultralite 3
414 BDL15mmx5-1/4˝-16´ Ultralite 4
412 BDL15mmx4-1/4˝-16´ Ultralite 6
Baseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
Baseboards
618 BDL15mmx5-1/4˝-16´ Ultralite 4
623 BDL12mmx3-1/4˝-16´ Ultralite 9
MFPU624 BDL1/2˝x4-1/4˝-16´ Ultralite 6
Baseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
Baseboards
MFPU405 BDL1/2˝x4˝-16˝ Ultralite 6
161 BDL15mmx5-1/4˝-16´ Ultralite 4
163 BDL15mmx7-1/4˝-16´ Ultralite 4
ULTRALITE SUPERCOATMDFMOULDInGSULTRALITE SUPERCOATMDFMOULDInGS
39 40
Baseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
Baseboards
MFPU8275 BDL5/8˝x5-1/2˝-16´ Ultralite 4
MFPU8281 BDL1/2˝x6˝-16´ Ultralite 4
MFPU8237 BDL5/8˝x5-1/2˝-16˝ Ultralite 4
MFPU8237A BDL5/8˝x7-1/4˝-16˝ Ultralite 4
900 BDL1-3/18x5-1/4˝-16´ Ultralite 6
901 BDL1-3/18x-6-3/4˝-16´ Ultralite 6
Crownsareplacedalongthewallattheceiling.Theycomeinawiderangeofpatternsandsizes.Crownssoftenthetransitionfromwalltoceilingwhileaddingadistinctivelookandcharmtoyourroom.
ALL SIZES NOMINAL
Crowns
514 BDL1/2˝x5-1/4˝-16´ Ultralite 6
ULTRALITE SUPERCOATMDFMOULDInGSULTRALITE SUPERCOATMDFMOULDInGS
41 42
513 BDL1˝x7-1/4˝-16´ Ultralite 2
Crownsareplacedalongthewallattheceiling.Theycomeinawiderangeofpatternsandsizes.Crownssoftenthetransitionfromwalltoceilingwhileaddingadistinctivelookandcharmtoyourroom.
ALL SIZES NOMINAL
Crowns
41 BDL30mmx6-5/16˝-16´ Ultralite 2
Crownsareplacedalongthewallattheceiling.Theycomeinawiderangeofpatternsandsizes.Crownssoftenthetransitionfromwalltoceilingwhileaddingadistinctivelookandcharmtoyourroom.
ALL SIZES NOMINAL
Crowns
512 BDL15mmx5-1/4˝-16´ Ultralite 6
43 BDL25mmx6-15/16˝-16´ Ultralite 2
47 BDL9/16˝x4-1/2˝-16´ Ultralite 6
51 BDL15mmx3-1/4˝-16´ Ultralite 6
ULTRALITE SUPERCOATMDFMOULDInGSULTRALITE SUPERCOATMDFMOULDInGS
43 44
CrownsCrownsareplacedalongthewallattheceiling.Theycomeinawiderangeofpatternsandsizes.Crownssoftenthetransitionfromwalltoceilingwhileaddingadistinctivelookandcharmtoyourroom.
ALL SIZES NOMINAL
168 BDL3/4˝x5-1/4˝-16´ Ultralite 2
242 BDL1˝x7-1/4˝-16´ Ultralite 2
CrownsCrownsareplacedalongthewallattheceiling.Theycomeinawiderangeofpatternsandsizes.Crownssoftenthetransitionfromwalltoceilingwhileaddingadistinctivelookandcharmtoyourroom.
ALL SIZES NOMINAL
701 BDL13/16˝x5-5/8˝-16´ Ultralite 2
712 BDL5/8˝x4-1/2˝-16´ Ultralite 4
40 BDL18mmx4-1/4˝-16´ Ultralite 6
ULTRALITE SUPERCOATMDFMOULDInGSULTRALITE SUPERCOATMDFMOULDInGS
45 46
297 BDL18mmx3˝-16´ Ultralite 6
PanelMouldsareusedtoframewallpanelingandaddanaccenttoyourwalls.Oftenusedinfurnitureconstruction.
ALL SIZES NOMINAL
184 BDL18mmx1-1/2˝-14´ Ultralite 20
Panel Moulds
850 BDL29mmx1-3/4˝-8´ MDFPrimed 8
Trimworkinstalledintheareabelowachairrail.numerousoptionsareavailableincludingraisedpanel,shadowboxandbeaded.Combinedwithachairrailandbaseboard,Wainscotingcreatesadramaticlooktoanyroom.
ALL SIZES NOMINAL
Wainscot
222 BDL9mmx5-3/4˝-10´ MDFPrimed PCS
Chair Rails
9532 BDL1/2˝x1-3/8˝-10´ MDFPrimed 25
Opening TrimAnOpeningTrimisanarrowstripofwoodusedtocoverjointsorasdecorativeverticalmembersoverplywoodorwideboards.
ALL SIZES NOMINAL
CrownsCrownsareplacedalongthewallattheceiling.Theycomeinawiderangeofpatternsandsizes.Crownssoftenthetransitionfromwalltoceilingwhileaddingadistinctivelookandcharmtoyourroom.
ALL SIZES NOMINAL
509 BDL30mmx2-1/8˝-16´ Ultralite 8
409 BDL30mmx1-7/8˝-16´ Ultralite 8
E2E ProfilesE2E(Eased2Edges)andE1E(Eased1Edge)profilesareavailableinadditionalwidthsandthicknessesuponrequest.
ALL SIZES NOMINAL
472 BDL15mmx2-1/2˝-14´ Ultralite 10
492 BDL12mmx2-1/2˝-14´ Ultralite 10
496 BDL1/2˝x3-1/2˝-16´ MDFPrimed 10
494 BDL12mmx3-1/4˝-16´ Ultralite 10
MFPU433 BDL5/8˝x3˝-14´ Ultralite 6
ULTRALITE SUPERCOATMDFMOULDInGSULTRALITE SUPERCOATMDFMOULDInGS
ChairRailsarepracticalaswellasdecorative.Appliedtoawall,from24to48inchesupfromthefloor,theyprotectthewallfromscuffsanddentsfromthebacksofchairsaswellasaddingadistinctiveaccenttoanyroom.
ALL SIZES NOMINAL
PRIMED FINGERJOINT PINEMOULDInGS
PR
IME
D F
J P
INE
47
Ultralite Supercoat1/3lessweightthanregularMDF,asupersmoothprimerandeasytonail;Ultraliteistheidealchoiceformostpaintgradeprojects.
497 BDL1/2˝x4-1/2˝-16´ MDFPrimed 6
498 BDL1/2˝x5-1/2˝-16´ MDFPrimed 6
E2E ProfilesE2E(Eased2Edges)profilesareavailableinadditionalwidthsandthicknessesuponrequest.
ALL SIZES NOMINAL
MFPU499 BDL1/2˝x7-1/4˝-16´ Ultralite PCS
1X2
1X3
1X4
1X5
1X6
1X7
1X8
1X10
1X12
2X2
2X3
2X4
2X6
2X8
2X10
2X12
4X4
1/2X2
1/2X3
1/2X4
1/2X5
1/2X6
1/2X8
ULT
RA
LITE
Finish Lumber (S4S)
ULTRALITE SUPERCOATMDFMOULDInGS
PRIMED FINGERJOINT PINEMOULDINGS• Economicalwoodmouldingoption
• Smoothattractivefinishwhenpainted
• Easilyworkedwithpowerandhandtools
• Excellentforamultitudeofapplications
49 50
CasingsCasingsdefinetheoverallcharacterofaroomandareoftenthemostvisiblepartofthetrim.Theyareusedprimarilytocoverthegapbetweendrywallandthedoororwindowframe.Casingsaregenerallythickerthanthebasemouldings.
ALL SIZES NOMINAL
356 WM BDL11/16˝x2-1/4˝-14´ FJPrimed 12
356 BDL3/8˝x2-1/4˝-14´ FJPrimed 20
3000 BDL7/16˝x1-7/16˝-14´ FJPrimed 30
3002 BDL3/8˝x2-3/16˝-14´ FJPrimed 20
3004 BDL13/32˝x2-3/16˝-14´ FJPrimed 20
444 BDL7/16˝x3-1/8˝-15´ FJPrimed 10
3121 BDL11/16˝x2-3/4˝-15´ FJPrimed 12
CasingsCasingsdefinetheoverallcharacterofaroomandareoftenthemostvisiblepartofthetrim.Theyareusedprimarilytocoverthegapbetweendrywallandthedoororwindowframe.Casingsaregenerallythickerthanthebasemouldings.
ALL SIZES NOMINAL
1208 BDL5/8˝x2-7/16˝-14´ FJPrimed 12
3005 BDL1/2˝x1-1/2˝-14´ FJPrimed 30
3125 BDL9/16˝x3-1/4˝-15´ FJPrimed 10
3130 BDL9/16˝x2-1/4˝-14´ FJPrimed 10
PRIMED FJ PINEMOULDInGSPRIMED FJ PINEMOULDInGS
51 52
311 BDL11/16˝x5-1/4˝-16´ FJPrimed 6
310 BDL11/16˝x4-1/8˝-16´ FJPrimed 6
309 BDL11/16˝x3-1/4˝-16´ FJPrimed 8
663 BDL9/16˝x4-1/4˝-16´ FJPrimed 8
653 BDL1/2˝x3-1/4˝-16´ FJPine 10
Baseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
Baseboards3140 BDL
7/16˝x3-3/16˝-16´ FJPrimed 10
Baseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
Baseboards
618 BDL1/2˝x5-3/16˝-16´ FJPrimed 6
623 BDL7/16˝x3-1/4˝-16´ FJPrimed 10
3112 BDL7/16˝x3-1/4˝-16´ FJPrimed 10
625 BDL7/16˝x2-1/4˝-16´ FJPrimed 20
673 BDL1/2˝x5-1/4˝-16´ FJPrimed 6
PRIMED FJ PINEMOULDInGSPRIMED FJ PINEMOULDInGS
53 54
47 BDL15mmx4-1/4˝-16´ FJPrimed 8
3244 BDL9/16˝x1-1/4˝-14´ FJPrimed 24
3242 BDL1/2˝x11/16˝-14´ FJPrimed 25
3240 BDL3/8˝x9/16˝-8´ FJPrimed 25
3248 BDL1-3/16˝x2-1/4˝-16´ FJPrimed 8
54 BDL9/16˝x2-1/4˝-16´ FJPrimed 12
CrownsCrownsareplacedalongthewallattheceiling.Theycomeinawiderangeofpatternsandsizes.Crownssoftenthetransitionfromwalltoceilingwhileaddingadistinctivelookandcharmtoyourroom.
ALL SIZES NOMINAL
409 BDL1-1/4˝x1-7/8˝-16´ FJPrimed 8
51 BDL9/16˝x3-1/4˝-16´ FJPrimed 8
CrownsCrownsareplacedalongthewallattheceiling.Theycomeinawiderangeofpatternsandsizes.Crownssoftenthetransitionfromwalltoceilingwhileaddingadistinctivelookandcharmtoyourroom.
ALL SIZES NOMINAL
Cornersareusedtoprotecttheoutsideedgesofthewallfromdamageandabrasion.Cornerscomeinawidevarietyofsizesanddetailing.
ALL SIZES NOMINAL
3282 BDL11/16˝x11/16˝-8´ FJPrimed 30
3280 BDL1-1/16 ̋x1-1/16 ̋-8´ FJPrimed 30
202 BDL1-1/8˝x1-1/8˝-8´ FJPrimed 30
Corners
PRIMED FJ PINEMOULDInGSPRIMED FJ PINEMOULDInGS
55 56
3422 BDL3/8˝x1-1/4˝-14´ FJPrimed 30
3294 BDL3/8˝x1-5/8˝-14´ FJPrimed 20
3296 BDL3/8˝x2-1/4˝-14´ FJPrimed 20
3274 BDL1/4˝x3/4˝-8´ FJPrimed 40
3279 BDL7/16˝x1-5/8˝-14´ FJPrimed 20
3277 BDL3/8˝x3/4˝-14´ FJPrimed 30
TBARS100 BDL2-3/8˝X3-3/8˝-100˝ FJPrimed PCS
TBARS7 BDL2-3/8˝X3-3/8˝-7´ FJPrimed PCS
3278 BDL3/8˝x1-1/8˝-14´ FJPrimed 30
936 BDL3/8˝x1-1/4˝-14´ FJPrimed 30
Door Stops, Battens & Screen Moulds
QuarterRoundscomeinseveralsizesandserveavarietyoffunctions.Theyaremostoftenusedtofinishinsidecorners.
ALL SIZES NOMINAL
3202 BDL1/2˝x1/2˝-8´ FJPrimed 30
3206 BDL11/16˝x11/16˝-14´ FJPrimed 30
320608 BDL11/16˝x11/16˝ FJPrimed 25
Quarter RoundsChairRailsarepracticalaswellasdecorative.Appliedtoawall,from24to48inchesupfromthefloor,theyprotectthewallfromscuffsanddentsfromthebacksofchairsaswellasaddingadistinctiveaccenttoanyroom.
ALL SIZES NOMINAL
Chair Rails
297 BDL11/16˝x3˝-14´ FJPrimed 8
T Bars & Screen MouldsAveryversatileprofile;ScreenMouldfitsawidevarietyofneedsanduses.Traditionallyusedtoholdmeshscreeningintowoodscreens,italsoworkswellasedgetrimonvariousshelvingorwoodtrimforwallfinishes.
ALL SIZES NOMINAL
TheDoorStopmouldingsareattachedtothedoorjambonbothsidesandatthetop.Itiswherethedoorcomestoarestwhenitisclosedstoppingthedoorfrommovinganyfurther,andcoveringthegapthatwouldotherwiseappearbetweenthedoorandthejambs.
ABattenisanarrowstripofwoodusedtocoverjointsorasdecorativeverticalmembersoverplywoodorwideboards.
Averyversatileprofile;ScreenMouldfitsawidevarietyofneedsanduses.Traditionallyusedtoholdmeshscreeningintowoodscreens,italsoworkswellasedgetrimonvariousshelvingorwoodtrimforwallfinishes.
ALL SIZES NOMINAL
PRIMED FJ PINEMOULDInGSPRIMED FJ PINEMOULDInGS
57 58
303 BDL1-3/16̋x1-3/8̋-7 ́&14´ FJPrimed 8
180 BDL1-3/16 ̋x2 ̋-7 ́&14´ FJPrimed 8
3322 BDL1-3/16˝x2˝-14´ FJPrimed 6
ABrickmouldisusedasexteriorcasingarounddoors.2inchesisthemostcommonsize,however,1-1/2and1-1/4inchsizesareavailable.
ALL SIZES NOMINAL
3516 BDL11/16˝x11/16˝-14´ FJPrimed 30
3428 BDL1/2˝x3/4˝-14´ FJPrimed 30
SquaresandPartingBeadsareusedinawiderangeofapplicationsincludingfillinggapsandtransitioningheights.Thisprofilemayalsobeusedinavarietyofcraftprojects.
ALL SIZES NOMINAL
Squares
Brickmoulds
3264 BDL11/16 ̋x11/16 ̋-8 ́&14´ FJPrimed 30
326408 BDL11/16˝x11/16˝ FJPrimed 30
3260 BDL1/2˝x1/2˝-8´ FJPrimed 40
Covesarecommonlyusedtosoftenthetransitiononinsidecornersbutmaybeusedforawiderangeofapplications.
ALL SIZES NOMINAL
Coves
Alsocalledwindowsill,aWindowStoolisthesurfaceinstalledbelowthesashofawindow.Triminstalledunderwindowstoolcreatesadistinctivelookandaddsadecorativetouch.
ALL SIZES NOMINAL
3413 BDL1-3/4˝x7-1/2˝-14´ FJPrimed PCS
3412 BDL1-3/4˝x5-1/2˝-14´ FJPrimed PCS
3410 BDL1-1/4˝x5-1/4˝-14´ FJPrimed PCS
3411 BDL1-1/4˝x7-1/4˝-14´ FJPrimed PCS
Window Stools
PRIMED FJ PINEMOULDInGSPRIMED FJ PINEMOULDInGS
59
1X2
1X3
1X4
1X5
1X6
1X7
1X8
1X10
1X12
2X2
2X3
2X4
2X6
2X8
2X10
2X12
4X4
1/2X2
1/2X3
1/2X4
1/2X5
1/2X6
1/2X8
FJP
RIM
ED
Primed FingerjointShortpiecesofwoodjoinedtogethertomakelongpiecesthatareprimedandreadytotopcoat.Idealchoiceforthosethatliketoworkwithsolidwood.
Finish Lumber (S4S)
182 BDL9/16˝x1-9/16˝-14´ FJPrimed 20
3724 BDL3/4˝x1-1/8˝-14´ FJPrimed 20
292 BDL9/16˝x1-1/8˝-14´ FJPrimed 20
PanelMouldsareusedtoframewallpanelingandaddanaccenttoyourwalls.Oftenusedinfurnitureconstruction.
ALL SIZES NOMINAL
Panel Moulds
BaseShoesareprimarilyusedtotrimflooringmaterialsandareoftenusedincombinationwithatraditionalbaseboardtoconcealvariationsbetweentheflooringandthebase.Thisversatileprofileworksgreattosolvenumeroustrimmingneeds.
ALL SIZES NOMINAL
Base Shoes
3290 Base Shoe BDL1/2˝x3/4˝-16´ FJPrimed 25
POPLARMOULDInGS
PO
PLA
R
POPLAR MOULDInGS• Extremelysmoothdoublesandedmouldedsurface
• Perfectlysuitedtoacceptpaint,stain,ornaturalfinish
• Easilystainedtomatchfinehard-woodssuchascherryandwalnut
PRIMED FJ PINEMOULDInGS
61 62
CasingsCasingsdefinetheoverallcharacterofaroomandareoftenthemostvisiblepartofthetrim.Theyareusedprimarilytocoverthegapbetweendrywallandthedoororwindowframe.Casingsaregenerallythickerthanthebasemouldings.
ALL SIZES NOMINAL
497 BDL1/2˝x4-1/2˝-16´ Poplar PCS
102 BDL1˝x2˝-16´ Poplar PCS
103 BDL1˝x3˝-16´ Poplar PCS
104 BDL1˝x4˝-16´ Poplar PCS
105 BDL1˝x5˝-16´ Poplar PCS
Baseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
Baseboards S4S ProfilesS4Sisanacronymthatstandsfor“Surfaced4Sides”anddesignatesdimensionallumberthathasbeenplanedonallsides.Thisversatileproductcanbeusedbothasamouldingandasahigh-gradeprojectboard.
ALL SIZES NOMINAL
POPLARMOULDInGSPOPLARMOULDInGS
433 BDL5/8˝x3˝-16´ Poplar PCS
63
106 BDL1˝x6˝-16´ Poplar PCS
108 BDL1˝x8˝-16´ Poplar PCS
S4S ProfilesS4Sisanacronymthatstandsfor“Surfaced4Sides”anddesignatesdimensionallumberthathasbeenplanedonallsides.Thisversatileproductcanbeusedbothasamouldingandasahigh-gradeprojectboard.
ALL SIZES NOMINAL
Finish Lumber (S4S)
1X2
1X3
1X4
1X5
1X6
1X7
1X8
1X10
1X12
2X2
2X3
2X4
2X6
2X8
2X10
2X12
4X4
1/2X2
1/2X3
1/2X4
1/2X5
1/2X6
1/2X8
POPL
AR
VG
DO
UG
LAS
FIR
VG DOUGLAS FIRMOULDInGS
• StrongSoftwoodofMediumHardness
• StainsandFinishesBeautifully
• EasilyWorkedwithPowerTools
• AnOverallHigh-endProduct
VG DOUGLAS FIRMOULDInGSPOPLARMOULDInGS
65 66
003 BDL3/4˝x3-1/2˝-RL VGFir 6
CasingsCasingsdefinetheoverallcharacterofaroomandareoftenthemostvisiblepartofthetrim.Theyareusedprimarilytocoverthegapbetweendrywallandthedoororwindowframe.Casingsaregenerallythickerthanthebasemouldings.
ALL SIZES NOMINAL
303 BDL1-1/4˝x1-1/2˝-RL VGFir 6
180 BDL1-3/16 ̋x2 ̋-RL VGFir 8
ABrickmouldisusedasexteriorcasingarounddoors.2inchesisthemostcommonsize,however,1-1/2and1-1/4inchsizesareavailable.
ALL SIZES NOMINAL
Brickmoulds
166 BDL1/2˝x5-1/2˝-RL VGFir 4
521E1 BDL1/2˝x5-1/2˝-RL VGFir 4
BaseboardsBaseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
3206 BDL11/16˝x11/16˝-RL VGFir 30
QuarterRoundscomeinseveralsizesandserveavarietyoffunctions.Theyaremostoftenusedtofinishinsidecorners.
ALL SIZES NOMINAL
Quarter Round
5000F BDL1-3/16˝x4-1/4˝-RL VGFir 4
ArchitravesInclassicalarchitecture,itdescribedthemainbeamrestingonthetopsofthecolumns.Todayitisoftenusedasadecorativemouldingforornamentationorfinishingatthetopofwindowsanddoors.
ALL SIZES NOMINAL
VG DOUGLAS FIRMOULDInGSVG DOUGLAS FIRMOULDInGS
67 68
TBARS100 BDL2-3/8˝X3-3/8˝-100˝ MGFir PCS2-3/8˝X3-3/8˝-100˝ VGFir PCS
TBARS7 BDL2-3/8˝X3-3/8˝-7´ MGFir PCS2-3/8˝X3-3/8˝-7´ VGFir PCS
Screen Moulds & T BarsAveryversatileprofile;ScreenMouldfitsawidevarietyofneedsanduses.Traditionallyusedtoholdmeshscreeningintowoodscreens,italsoworkswellasedgetrimonvariousshelvingorwoodtrimforwallfinishes.
ALL SIZES NOMINAL
950 BDL7/16˝x1-1/8˝˝-RL VGFir 6
TBARL100 BDL3-3/16˝x3-11/16˝˝-RL VGFir PCS
45 BDL5/8˝x5-1/4˝-RL VGFir 4
47 BDL5/8˝x4-1/4˝-RL VGFir 6
Crownsareplacedalongthewallattheceiling.Theycomeinawiderangeofpatternsandsizes.Crownssoftenthetransitionfromwalltoceilingwhileaddingadistinctivelookandcharmtoyourroom.
ALL SIZES NOMINAL
Crowns
Alsocalledwindowsill,aWindowStoolisthesurfaceinstalledbelowthesashofawindow.Triminstalledunderwindowstoolcreatesadistinctivelookandaddsadecorativetouch.
ALL SIZES NOMINAL
Window Stools
3411 BDL1-1/4˝x7-1/4˝-14´ VGFir PCS
3242 BDL1/2˝x11/16˝-14´ FJPrimed 6
3240 BDL3/8˝x9/16˝-8´ VGFir 6
VG DOUGLAS FIRMOULDInGSVG DOUGLAS FIRMOULDInGS
HEMLOCKMOULDINGS
• Extremelysmoothdoublesandedmouldedsurface
• Perfectlysuitedtostainornaturalfinish
• Easilystainedtomatchfinehardwoods suchascherryandwalnut
HEMLOCKMOULDInGS
HEM
LOC
K
69312E1 BDL
1/2˝x3-1/2˝-RL VGFIr 6412E1 BDL
1/2˝x4-1/2˝-RL VGFIr 6512E1 BDL
1/2˝x5-1/2˝-RL VGFIr 6
Douglas FirForthenorthwestfeel.DouglasFirmakesabeautifulprojectwhenfinishedwithaclearfinishcoat.
Finish Lumber (S4S)
1X2
1X3
1X4
1X5
1X6
1X7
1X8
1X10
1X12
2X2
2X3
2X4
2X6
2X8
2X10
2X12
4X4
1/2X2
1/2X3
1/2X4
1/2X5
1/2X6
1/2X8
VG
FIR
MG
FIR
E2E ProfilesE2E(Eased2Edges)andE1E(Eased1Edge)profilesareavailableinadditionalwidthsandthicknessesuponrequest.
ALL SIZES NOMINAL
312E2 BDL5/8˝x3-1/2˝-RL VGFir 6
212E2 BDL5/8˝x2-1/2˝-RL VGFir 10
VG DOUGLAS FIRMOULDInGS
71 72
Baseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
Baseboards
653 BDL1/2˝x3-1/4˝-RL Hemlock 10
623 BDL7/16˝x3-1/4˝-RL Hemlock 10
3112 BDL7/16˝x3-1/4˝-RL Hemlock 10
3282 BDL3/4˝x3/4˝-RL Hemlock 25
3280 BDL1-1/16 ̋x1-1/16 ̋-RL Hemlock 20
202 BDL1-1/8˝x1-1/8˝-8´ Hemlock 30
Cornersareusedtoprotecttheoutsideedgesofthewallfromdamageandabrasion.Cornerscomeinawidevarietyofsizesanddetailing.
ALL SIZES NOMINAL
Corners
CasingsCasingsdefinetheoverallcharacterofaroomandareoftenthemostvisiblepartofthetrim.Theyareusedprimarilytocoverthegapbetweendrywallandthedoororwindowframe.Casingsaregenerallythickerthanthebasemouldings.
ALL SIZES NOMINAL
356 WM BDL5/8˝x2-1/4˝-RL Hemlock 10
357 BDL7/16˝x2-1/8˝-RL Hemlock 10
3000 BDL1/2˝x1-1/2˝-RL Hemlock 20
3002 BDL1/2˝x2-1/4˝-RL Hemlock 10
3004 BDL3/8˝x2-3/16˝-RL Hemlock 10
1208 BDL11/16˝x2-1/2˝-RL Hemlock 10
HEMLOCKMOULDInGSHEMLOCKMOULDInGS
73 74
3240 BDL3/8˝x1/2˝-RL Hemlock 25
3248 BDL1-3/16˝x2-1/4˝-RL Hemlock 4
CrownsCrownsareplacedalongthewallattheceiling.Theycomeinawiderangeofpatternsandsizes.Crownssoftenthetransitionfromwalltoceilingwhileaddingadistinctivelookandcharmtoyourroom.
ALL SIZES NOMINAL
3212 BDL3/8˝x3/4˝-RL Hemlock 25
3220 BDL1/2˝-RL Hemlock 25
3222 BDL11/16˝-RL Hemlock 25
3224 BDL1-1/16˝-RL Hemlock 10
3226 BDL1-5/16˝-RL Hemlock 10
3228 BDL1-1/2˝-RL Hemlock 10
3200 BDL1/4˝x1/4˝-RL Hemlock 25
3202 BDL1/2˝x1/2˝-RL Hemlock 25
3206 BDL11/16˝x11/16˝-RL Hemlock 25
Quarter, Half & Full Rounds
3244 BDL5/8˝x1-1/4˝-RL Hemlock 24
3242 BDL1/2˝x11/16˝-RL Hemlock 25
3120 BDL9/16˝x2-1/4˝-16´ Hemlock 10
PanelMouldsareusedtoframewallpanelingandaddanaccenttoyourwalls.Oftenusedinfurnitureconstruction.
ALL SIZES NOMINAL
101 BDL7/16˝x15/16˝-RL Hemlock 25
Panel Moulds
3290 Base Shoe BDL1/2˝x3/4˝-RL Hemlock 25
3288 Base Shoe BDL1/2˝x3/4˝-RL Hemlock 25
BaseShoesareprimarilyusedtotrimflooringmaterialsandareoftenusedincombinationwithatraditionalbaseboardtoconcealvariationsbetweentheflooringandthebase.Thisversatileprofileworksgreattosolvenumeroustrimmingneeds.
ALL SIZES NOMINAL
Base Shoes
3517 BDL1-1/16 ̋x1-1/16 ̋-RL Hemlock 9
3520 BDL11/16˝x11/16˝-RL Hemlock 25
3429 BDL1/2˝x3/4˝-RL Hemlock 25
SquaresandPartingBeadsareusedinawiderangeofapplicationsincludingfillinggapsandtransitioningheights.Thisprofilemayalsobeusedinavarietyofcraftprojects.
ALL SIZES NOMINAL
Squares
HEMLOCKMOULDInGSHEMLOCKMOULDInGS
QuarterRoundscomeinseveralsizesandserveavarietyoffunctions.Theyaremostoftenusedtofinishinsidecorners.
AcrosssectionofaHalfRoundlookslikeahalfcircleandisusedprimarilyasdecorativetrim.Itworkswellasatrimpieceforwallpaperortoaddadecorativepatterntoflatpanels.Thisprofilecanalsobeusedtoputaroundededgeonvariousshelving.
FullRoundsareusedfornumerouspurposesandprojects.Someofthemorecommonusesareclosetpoles,curtainrodsandtowelrods.
ALL SIZES NOMINAL
75 76
334 BDL1/2˝x1-1/2˝-RL Hemlock 20
3264 BDL11/16˝x11/16˝-RL Hemlock 25
3260 BDL1/2˝x1/2˝-RL Hemlock 25
Covesarecommonlyusedtosoftenthetransitiononinsidecornersbutmaybeusedforawiderangeofapplications.
ALL SIZES NOMINAL
Coves
Door Stops, Battens & Screen MouldsTheDoorStopmouldingsareattachedtothedoorjambonbothsidesandatthetop.Itiswherethedoorcomestoarestwhenitisclosedstoppingthedoorfrommovinganyfurther,andcoveringthegapthatwouldotherwiseappearbetweenthedoorandthejambs.
ABattenisanarrowstripofwoodusedtocoverjointsorasdecorativeverticalmembersoverplywoodorwideboards.
Averyversatileprofile;ScreenMouldfitsawidevarietyofneedsanduses.Traditionallyusedtoholdmeshscreeningintowoodscreens,italsoworkswellasedgetrimonvariousshelvingorwoodtrimforwallfinishes.
ALL SIZES NOMINAL
3422 BDL3/8˝x1-3/16˝-RL Hemlock 30
0010 BDL3/8˝x1-5/8˝-RL Hemlock 20
0001 BDL7/16˝x2-1/4˝-RL Hemlock 10
Handrailsprovidesafetyandsupport.
ALL SIZES NOMINAL
3510 BDL1-1/2˝x1-1/2˝-RL Hemlock 6
3507 BDL1-3/16˝x2-1/4˝-RL Hemlock 4
Handrails
303 BDL1-1/4˝x1-1/2˝-RL Hemlock 6
3322 BDL1-3/16 ̋x1-15/16 ̋-RL Hemlock 4
ABrickmouldisusedasexteriorcasingarounddoors.2inchesisthemostcommonsize,however,1-1/2and1-1/4inchsizesareavailable.
ALL SIZES NOMINAL
Brickmoulds Finish Lumber (S4S)
1X2
1X3
1X4
1X5
1X6
1X7
1X8
1X10
1X12
2X2
2X3
2X4
2X6
2X8
2X10
2X12
4X4
1/2X2
1/2X3
1/2X4
1/2X5
1/2X6
1/2X8
VG
HE
MLO
CK
Pacific Coast HemlockYournaturalchoice.Acceptspaints,stains&naturalfinishesverywell.CombinedwithHemlockmouldingsforagreatdecoratingchoice.
3274 BDL1/4˝x3/4˝-RL Hemlock 50
HEMLOCKMOULDInGSHEMLOCKMOULDInGS
OAKMOULDInGS
OA
Kwww.mouldingandmillwork.com
OAK MOULDInGS• ResistsAbrasion
• Distinct,BeautifulGrain
• SubtleColourthatisEnhancedwithaLightStain
• AttractiveinBothTraditionalandContemporaryDecor
The differences are immediatelynoticeable when you look at Moulding & Millworks Pacific Coast Hemlock S4S Boards • Our boards are moulded on all 4 sides in our state of the art factories to the same quality and consistency of our hemlock mouldings. • The vertical grain orientation offers an attractive look and smooth texture while providing maximum durability. • The long length structure surpasses what is available in most other species of wood.These fine qualities have helped Pacific Coast Hemlock achievea reputation of excellencethroughout the world.
Moulding & Millwork S4S boards offer a complete interior trim decorating solution, our S4S boards: • Deliver the natural beauty and warmth of real wood to any room. • Accentuate the beauty of entryways with the distinguished classic look of stained wood. • Update the look of any home to match with the modern craftsman style of simple clean lines.
Fine grain Pacific Coast Hemlock is known to craftsmen for its superior characteristics such as accepting stains with consistency and ease, superb texture that offers durability, and a remarkablelook that will last a lifetime.
With Moulding & Millwork S4S boards the possibilities are endless:
• Be your own designer, coordinate with any of our high quality hemlock mouldings to create styles that will be unique to your home.• Pacific Coast Hemlock’s exceptional ability to accept a variety of stains allows you to match a number of different wood looks with one product.
79 80
653 BDL1/2˝x3-1/4˝-RL Oak 10
356 BDL1/2˝x2-1/8˝-RL Oak 10
CasingsCasingsdefinetheoverallcharacterofaroomandareoftenthemostvisiblepartofthetrim.Theyareusedprimarilytocoverthegapbetweendrywallandthedoororwindowframe.Casingsaregenerallythickerthanthebasemouldings.
ALL SIZES NOMINAL
1208 BDL3/4˝x2-5/8˝-RL Oak 6
Baseboardsareplacedalongthewallatthefloor.Theyshouldbechosentoworkinharmonywithyourcasingstofinishandtietheroomtogether.Baseboardsareusuallythinnerthanthecasing.
ALL SIZES NOMINAL
BaseboardsCornersareusedtoprotecttheoutsideedgesofthewallfromdamageandabrasion.Cornerscomeinawidevarietyofsizesanddetailing.
ALL SIZES NOMINAL
3282 BDL3/4˝x3/4˝-8´ Oak 20
3280 BDL1-1/16 ̋x1-1/16 ̋-8´ Oak 20
202 BDL1-1/8˝x1-1/8˝-8´ Oak 20
Corners
Battens & Screen MouldsABattenisanarrowstripofwoodusedtocoverjointsorasdecorativeverticalmembersoverplywoodorwideboards.
Averyversatileprofile;ScreenMouldfitsawidevarietyofneedsanduses.Traditionallyusedtoholdmeshscreeningintowoodscreens,italsoworkswellasedgetrimonvariousshelvingorwoodtrimforwallfinishes.
ALL SIZES NOMINAL
3422 BDL3/8˝x1-3/16˝-RL Oak 20
3296 BDL5/16˝x2-1/4˝-RL Oak 10
OAKMOULDInGSOAKMOULDInGS
82
Moulding Selection GuideSHEETGOODS S4S & WAINSCOT
SHEE
T G
OO
DS
S4S
& W
AIN
SCO
T
81
Ultralite Supercoat1/3lessweightthanregularMDF,asupersmoothprimerandeasytonail;Ultraliteistheidealchoiceformostpaintgradeprojects.
Finish Lumber (S4S)
1X2
1X3
1X4
1X5
1X6
1X7
1X8
1X10
1X12
2X2
2X3
2X4
2X6
2X8
2X10
2X12
4X4
1/2X2
1/2X3
1/2X4
1/2X5
1/2X6
1/2X8
OA
K
QuarterRoundscomeinseveralsizesandserveavarietyoffunctions.Theyaremostoftenusedtofinishinsidecorners.
ALL SIZES NOMINAL
3206 BDL11/16˝x11/16˝-RL Oak 20
Quarter Rounds
3264 BDL11/16˝x11/16˝-RL Oak 20
Covesarecommonlyusedtosoftenthetransitiononinsidecornersbutmaybeusedforawiderangeofapplications.
ALL SIZES NOMINAL
Coves
OAKMOULDInGS
SHEET GOODS S4S & WAINSCOT• Perfectfor“CraftsmanStyleDecor”
• Smoothattractivefinishwhenpainted
• Excellentforamultitudeofapplications
DOUGLAS FIR HEMLOCK
KNOTTY PINE RED OAK
FJ PRIMEDSPERO ECO MDFULTRALITE MDF
MAPLEPOPLAR
8483
DESCRIPTION Code Lift SizeRC Birch B-4 VC 1/8 x 4 x 8 PB18B4I 220RC Birch B-4 VC 1/4 x 4 x 8 PB14B4I 150RC Birch C-2 VC 1/2 x 4 x 8 PB12B2I 60RC Birch C-2 VC 3/4 x 4 x 8 PB34C21I 50RC Birch Domestic C2 1/2 PB12C2D 60RC Birch VC C2 Domestic 3/4 PB34C2D 40
BIRCH
DESCRIPTION Code Lift SizeULTRAPLY 1/2 x 4 x 8 FFUL12 60ULTRAPLY 5/8 x 4 x 8 FFUL58 50ULTRAPLY 3/4 x 4 x 8 FFUL34 40
ULTRALITE
DESCRIPTION Code Lift SizeFS Oak A-4 VC 1/8 x 4 x 8 PRO18A4I 220FS Oak A-4 VC 1/4 x 4 x 8 PRO14A4I 150FS Oak B-2 VC 1/2 x 4 x 8 PRO12B2I 60FS Oak B-2 VC 3/4 x 4 x 8 PRO34B2I 45
OAK
DESCRIPTION Code Lift SizeRC Maple AW-4 VC Import 1/8 PMAP18AW41 200RC Maple AW-4 VC Import 1/4 PMAP14AW41 100RC Maple C-2 VC Import 1/2 PMAP12AW21 60RC Maple BW-2 VC 3/4 PMAP34AW21 46RC Maple C-2 VC DOMESTIC 3/4 PMAP34C2D 40
MAPLE
DESCRIPTION Code Lift SizeRC Mahogany VC 1/8 x 3 x 7 PM1837 220RC Mahogany VC 1/8 x 4 x 8 PM18 220RC Mahogany VC 1/4 x 4 x 8 PM14 220
MAHOGANY
DESCRIPTION Code Lift SizeRC Poplar VC Plywood CD 3/4 PPO34CDE 50
POPLAR
DESCRIPTION Code Lift SizeStandard Hardboard 4 x 8 x 1/8 FSH18 200Standard Pegboard 4 x 8 x 1/8 FSP18 200Stand Hardboard 4 x 8 x 1/4 FSH14 150Stand Pegboard 4 x 8 x 1/4 FSP14 150White Hardboard 4 x 8 x 1/8 FWH18 200White Hardboard 4 x 8 x 1/4 FWH14 150White Pegboard 4mm x 4 x 8 x 1/4 FWP14 150
HARRDBOARDS & PEGBOARDS
DESCRIPTION Code Lift SizePrem Pine Ply 1/4 x 4 x 8 Ft A/C PPN14 140Prem Pine Ply 11/32 x 4 x 8 Ft A/C PPN38 108Prem Pine Ply 15/32 x 4 x 8 Ft A/C PPN12 80Prem Pine Ply 19/32 x 4 x 8 Ft A/C PPN58 65Prem Pine Ply 23/32 x 4 x 8 Ft A/C PPN34 52Prem Pine Ply 31/32 x 4 x 8 Ft A/C PPN1 39Beaded Pine Panel 11/32 x 48 x 96 PPNB38 108
GIS SANDED PINE PLYWOOD
DESCRIPTION Code Lift SizeMelamine 1/2 White Moulding & Millwork FWS12 60Melamine 5/8 White Moulding & Millwork FWS58 50Melamine 3/4 White Moulding & Millwork FWS34 40Melamine Shelving 12 x 96 FWS581296 100Melamie Shelving 16 x 96 FWS581696 75Melamine Shelving 5/8 x 12 x 120 FWS5812120 100Melamine Shelving 5/8 x 16 x 120 FWS5816120 25
MELAMINE
DESCRIPTION Code Lift SizeFiberboard 1/8 x 4 x 8 48lb FF18 212Fiberboard 4 x 8 x 1/4 48lb FF14 112Fiberboard 4 x 8 x 3/8 48lb FF38 88Fiberboard 4 x 8 x 1/2 48lb FF12 66Fiberboard 4 x 8 x 5/8 48lb FF58 53Fiberboard 4 x 8 x 3/4 48lb FF34 44Fiberboard 4 x 8 x 1 48lb FF1 34
MDF
DESCRIPTION Code Lift SizeSlotwall 3/4 x 4 x 8 FFS 40White Slotwall 3/4 x 4 x 8 FSW34 40
SLOTWALL
*Please Call For Pricing**Full lifts and less than lift on all in stock Plywood.*Other species / sizes / thickness available upon request - please enquire.
PLYWOOD & SHEET GOODS
1X2
1X3
1X4
1X5
1X6
1X7
1X8
1X10
1X12
2X2
2X3
2X4
2X6
2X8
2X10
2X12
4X4
1/2X2
1/2X3
1/2X4
1/2X5
1/2X6
1/2X8
VGFIR VGHEMLOCK KnOTTYPInE OAK FJPRIMED SPEROECOMDF ULTRALITE MAPLE MGFIR POPLAR
DOUGLAS FIR PACIFIC COAST HEMLOCK KNOTTY PINEForthenorthwestfeel.DouglasFirmakesabeautifulprojectwhenfinishedwithaclearfinishcoat.
Yournaturalchoice.Acceptspaints,stains&naturalfinishesverywell.CombinedwithHemlockmouldingsforagreatdecoratingchoice.
Forarusticlook.Stainsandfinisheseasily.KnottyPinemouldingsarealsoavailableonaspecialorderbasis.
RED OAK PRIMED FINGERJOINT SPERO ECO MDFTraditional,durablehardwood.Easytoworkwithandfinish.
Shortpiecesofwoodjoinedtogethertomakelongpiecesthatareprimedandreadytotopcoat.Idealchoiceforthosethatliketoworkwithsolidwood.
Containsnourea-formaldehyde;meetsCARBPhaseIIrequirements;qualifiesforLEED™credits;100%recycledwoodfiberharvestedfromresponsiblymanagedforests.
ULTRALITE SUPERCOAT MAPLE POPLAR1/3lessweightthanregularMDF,asupersmoothprimerandeasytonail;Ultraliteistheidealchoiceformostpaintgradeprojects.
Foramodernlook.WhiteMapleisanextremelyhardwoodandwearsverywell.Canbepaintedorstained.
Averyversatileandaffordablehardwood.Poplarcanbepainted,aswellasstainedtomatchotherHardwoods.
Finish Lumber (S4S)
S4S LUMBERPLYWOOD & SHEET GOODS
85 86
Wainscot & PanellingTrimworkinstalledintheareabelowachairrail.Optionsinclude:raisedpanel,shadowbox&beaded.Combinedwithachairrail&baseboard,Wainscotingaddsadynamiclooktoanyroom.
ALL SIZES NOMINAL
MDF Wainscot BDLMFP718-32 1/4˝x7-1/8˝-32˝ 20
MFP718-96 1/4˝x7-1/8˝-96˝ 3
MDF Wainscot BDLMFP720-32 1/4˝x7-1/8˝-32˝ 20
MFP720-96 1/4˝x7-1/8˝-96˝ 3
MDF Wainscot BDLMFP722-32 1/4˝x5-1/4˝-32˝ 20
MFP722-96 1/4˝x5-1/4˝-96˝ 3
MDF Wainscot Cap BDLMFP850 1-1/8˝x1-3/4˝-8´ 4
Knotty Pine Wainscot Bead BDLMKP823B-32 5/16˝x3-9/16˝-32˝ 10
MKP823B-48 5/16˝x3-9/16˝-48˝ 6
MKP823B-96 5/16˝x3-9/16˝-96˝˝ 6
MDF Wainscot Set BDL
MFPWAInSET-965/8˝x2-5/8˝(Cap)
185/8˝x2-5/8˝-8´(Base)
Knotty Pine Wainscot Set BDL
MKPWAInSET-965/8˝x2-5/8˝(Cap)
25/8˝x2-5/8˝-8´(Base)
Wainscot & PanellingTrimworkinstalledintheareabelowachairrail.Optionsinclude:raisedpanel,shadowbox&beaded.Combinedwithachairrail&baseboard,Wainscotingaddsadynamiclooktoanyroom.
ALL SIZES NOMINAL
KCD V-Joint Wainscot BDLMKC823-96 5/16˝x3-9/16˝-8´ 1
MDF Wainscot BDLMFP2222 3/8˝x5-3/4˝-8´ 5
MFP222 3/8˝x5-3/4˝-10´ 5
Knotty Pine V-Joint Panelling BDLMKP823V-96 5/16˝x3-9/16-96˝ 6
WAINSCOT & PANELLINGWAINSCOT & PANELLING
STORAGE, HANDLING AND PREPARATION OF ALL MOULDINGS AND S4S BOARDSUntilthetimethisproducthasbeencorrectlyfinal coated (after painting or staining)andinstalled,inconformancewithall paint manufacturer recommendations as well as the highest and best building practices, respectively, for intendeduse, it must be continuously and effectively protected from exposure to direct sunlight, ground contact and the elements. It shouldbestored only in a dry, clean location and transported only if fully protected from water.Asa finalpreparationbefore installation: (a) indoors, theproductmust be “acclimated” to the environment by storing it in the installation space for at least 3 days (withbothfacesexposedtotheair inthatspace); (b) outdoors, every surface lacking both primer and final coat must be effectively coatedtoachieveprotectionrecommendedbythepaintmanufacturerrespectingintendeduse.
making interiors spectacular
Manufacturing Distribution Locations
CanadianDivisions
U.S.-RockyMountains
U.S.-Pacificnorthwest
U.S.-Southeast
U.S.-northeast
U.S.-Texas
U.S.-MidAtlantic
U.S.-Midwest
ManufacturingLocations
Vancouver (2)
Edmonton
Calgary
Saskatoon
Regina
Winnipeg
Toronto (2)
Montréal
Dartmouth
Anchorage
Seattle
Portland
Spokane
Chicago Baltimore Pittsburgh
Detroit
Atlanta
Charlotte
Orlando
Denver
Phoenix
Salt Lake City
Newark
Rochester
Boston
DallasSurrey
Maple Ridge
Calgary
Seattle
Ferndale
Richmond
Toronto
Lexington
88
AraucoPly Sanded ACX Pine Panel Offer:
Good 1 Side (G1S)Low Resin ContentUniform in Colour
Lightweight
High Quality FacesExterior Grade
Composed CoreFrom Sustainable
Plantation ForestsMinimal Core Voids
www.mouldingandmillwork.com
Moulding & Millwork is North America’s leading supplier of mouldings. We offer the largest and most innovative selection of quality products. Take advantage of virtually endless possibilities.
Making Interiors Spectacular
MOULDING & MILLWORK INC.19950 – 101 Avenue
Langley, B.C. V1M 3G6t. 604.882.5500f. 604.888.5242
top related