modeling avo classes - cggrutherford and williams (1989) derived the following classification scheme...

Modeling AVO Classes

Feby Hapsari

2

Rutherford/Williams Classification

Rutherford and Williams (1989) derived the following classification scheme for AVO anomalies, with further modifications by Ross and Kinman (1995) and Castagna (1997): Class 1: High impedance sand with decreasing AVO Class 2: Near-zero impedance contrast Class 2p: Same as 2, with polarity change Class 3: Low impedance sand with increasing AVO Class 4: Low impedance sand with decreasing AVO

This document describes modeling of the gas sand AVO classes and the derived AVO attributes for both positive and reverse polarity wavelets.

3

This figure from Castagna et al (1998) illustrates all 5 of the gas sand AVO classes.

Gas Sand AVO Classes

4

Depth (m) P-wave (m/s) S-wave (m/s) Density (g/cc)0 2900 1330 2.29

1000 2900 1330 2.291010 3220 1620 2.352000 2900 1330 2.29

Class 1

Depth (m) P-wave (m/s) S-wave (m/s) Density (g/cc) Depth (m) P-wave (m/s) S-wave (m/s) Density (g/cc)0 2900 1330 2.29 0 2900 1330 2.29

1000 2900 1330 2.29 1000 2900 1330 2.291010 2800 1620 2.28 1010 3000 1620 2.32000 2900 1330 2.29 2000 2900 1330 2.29

Depth (m) P-wave (m/s) S-wave (m/s) Density (g/cc) Depth (m) P-wave (m/s) S-wave (m/s) Density (g/cc)0 2900 1330 2.29 0 2900 1330 2.29

1000 2900 1330 2.29 1000 2900 1330 2.291010 2540 1620 2.09 1010 2540 1120 2.392000 2900 1330 2.29 2000 2900 1330 2.29

Class 4

Class 2 Class 2p

Class 3

The model was a 10 m thick sand at 1000 m depth. The data used for creating simple 3-layer models is as shown:

Data

Class 1

5

Class 1

6

Class 2p

7

Class 2p

8

Class 3

9

Class 3

10

Class 4

11

Class 4

12

Positive Polarity A*B Product

13

Reverse Polarity A*B Product

14

Positive Polarity SPR

15

Reverse Polarity SPR

16

Positive Polarity Rs

17

Reverse Polarity Rs

18

Positive Polarity Fluid Factor

19

Reverse Polarity Fluid Factor

20

Support Offices

21