m.e.f. mechanical energy factory mechanical power converter & re-generator system
Post on 17-Jan-2016
230 Views
Preview:
TRANSCRIPT
M.E.F.Mechanical Energy Factory
Mechanical Power Converter & Re-Generator System
Mechanical Power Converter& Re-Generator System
Amusement Mechanical Rides
Concept
Mechanical Energy Factory30 Megawatt Facility
From left to right:Operator Center, Warehouse/storage, 5 System steel buildings, 3 Battery Storage, Transformer steel building and grid interconnection with transformers.
TYPE OF CONVERSIONS
AC – AC 460 V to 1,140 V, 2MW to 6MW
AC – DC 460 V to 1,140 V, 2MW to 6MW
DC – DC 460 V to 1,140 V, 2MW to 6MW
DC – AC 460 V to 1,140 V, 2MW to 6MW
POWER CONVERSIONS
MECHANICAL POWER CONVERTER & RE-GENERATOR SYSTEM
(MEF™) Consist of:
AC Drives
Transformers
Steel Frame
Motors
Driven - Rotor / Flywheel
Driver - Lower Wheel
Permanent Magnet Generator
Gearbox – Speed Reducers
Mounted Bearings
Radiator (cooling system)
Water Tank - Water pump
MEF SYSTEM DIMENSIONS
Dimensions: Length 46'-0” ft. x Width 15'-0” ft. x Height 19'-0” ft.
Components
The concept of force is one of the foundations of mechanics and is closely tied to the concept of motion
and the principle of inertia.
How it works?
By applying:
Torque,
Lever Arm,
Speed and Weight.
Uniform Acceleration
is accomplished by the
Driver Lower Wheel
that are driven by two
800 hp motors.
AC Drive provide support for multiple built-in safety functions including: - Safe Stop - Zero speed monitoring - Safe limited speed - Safe maximum speed - Safe direction monitoring - Door monitoring and control - Enabling switch control - Safe Max Accel monitoring- Torque control monitoring- Voltage control monitoring
Ethernet port allows to easily configure, control and collect drive data, can be programmed to monitor the run time hours for machine or motor bearings, giving an advanced notification to help prevent unplanned downtime
ELECTRICAL LAYOUT
POWER DUPLICATION
Power can be duplicated by adding additional MEF™.Power can be duplicated by adding additional MEF™ units.Re-Generate the electricity necessary to operate your business and help you increase productivity, reduce costs and improve reliability.
Key Points
The system is a real Mechanical Energy Factory!
Clean Power / No Fossil Fuel, Reduce Emissions Sustainable, Reliable Cost Effective Low Operating Cost Low Maintenance Cost Decouple generation and load Increase asset efficiency and utilization Provide versatile, continuous-use asset that generates revenue Ease transmission constraints Mitigate intermittency "Firming" of renewables Provide greater ramp rate control Supports Renewable Portfolio Standards (RPS) targets Provide ancillary services Improve fast-response frequency regulation and balance load at
alower cost
Mechanical Power Converter &
Re-Generator System
Battery Storage
COMPLETE MECHANICALENERGY STORAGE
SOLUTION
Thank You!
top related