M.E.F.Mechanical Energy Factory

Mechanical Power Converter & Re-Generator System

Mechanical Power Converter& Re-Generator System

Amusement Mechanical Rides

Concept

Mechanical Energy Factory30 Megawatt Facility

From left to right:Operator Center, Warehouse/storage, 5 System steel buildings, 3 Battery Storage, Transformer steel building and grid interconnection with transformers.

TYPE OF CONVERSIONS

AC – AC 460 V to 1,140 V, 2MW to 6MW

AC – DC 460 V to 1,140 V, 2MW to 6MW

DC – DC 460 V to 1,140 V, 2MW to 6MW

DC – AC 460 V to 1,140 V, 2MW to 6MW

POWER CONVERSIONS

MECHANICAL POWER CONVERTER & RE-GENERATOR SYSTEM

(MEF™) Consist of:

AC Drives

Transformers

Steel Frame

Motors

Driven - Rotor / Flywheel

Driver - Lower Wheel

Permanent Magnet Generator

Gearbox – Speed Reducers

Mounted Bearings

Radiator (cooling system)

Water Tank - Water pump

MEF SYSTEM DIMENSIONS

Dimensions: Length 46'-0” ft. x Width 15'-0” ft. x Height 19'-0” ft.

Components

The concept of force is one of the foundations of mechanics and is closely tied to the concept of motion

and the principle of inertia.

How it works?

By applying:

Torque,

Lever Arm,

Speed and Weight.

Uniform Acceleration

is accomplished by the

Driver Lower Wheel

that are driven by two

800 hp motors.

AC Drive provide support for multiple built-in safety functions including: - Safe Stop - Zero speed monitoring - Safe limited speed - Safe maximum speed - Safe direction monitoring - Door monitoring and control - Enabling switch control - Safe Max Accel monitoring- Torque control monitoring- Voltage control monitoring

Ethernet port allows to easily configure, control and collect drive data, can be programmed to monitor the run time hours for machine or motor bearings, giving an advanced notification to help prevent unplanned downtime

ELECTRICAL LAYOUT

POWER DUPLICATION

Power can be duplicated by adding additional MEF™.Power can be duplicated by adding additional MEF™ units.Re-Generate the electricity necessary to operate your business and help you increase productivity, reduce costs and improve reliability.

Key Points

The system is a real Mechanical Energy Factory!

Clean Power / No Fossil Fuel, Reduce Emissions Sustainable, Reliable Cost Effective Low Operating Cost Low Maintenance Cost Decouple generation and load Increase asset efficiency and utilization Provide versatile, continuous-use asset that generates revenue Ease transmission constraints Mitigate intermittency "Firming" of renewables Provide greater ramp rate control Supports Renewable Portfolio Standards (RPS) targets Provide ancillary services Improve fast-response frequency regulation and balance load at

alower cost

Mechanical Power Converter &

Re-Generator System

Battery Storage

COMPLETE MECHANICALENERGY STORAGE

SOLUTION

Thank You!