mac - may 2015
Post on 22-Jul-2016
229 Views
Preview:
DESCRIPTION
TRANSCRIPT
LEARNING WITH GREAT
PASSIONBy Lim Tian Hock
C A DMay 2015 Issue
M A D ABOUT
10 M&E HACKS
YOU NEED TO KNOW!By AcePLP Daily Practitioners
FEATURES
THE OTHER ANG BROTHERBy Alumni, Kendrick Ang
We shape our
buildings and
afterwards,
our buildings
shape us.
Winston Churchill’s epic statement, is a fantastic observation of thearchitectural phenomenon, illuminating the fact that physical architecture isa static artefact and continues to transform us long after construction.
2MAD About CAD
ACEPLP BULLETINBEAT THE HEAT
EMPLOYEES’ CORNER
THE OTHER ANG BROTHERBY KENDRICK ANG
EVERY PROJECT IS A NEW GAINING EXPERIENCEBY SITI RAUDAH
DISCOVER INNOVATIVE DESIGNS BY ACEPLP BIM/ CAD ENGINEERS
MAY 2015
EDITOR’S NOTE 4
LEARN WITH GREAT PASSIONBY LIM TIAN HOCK
5
17
6 ESSENTIAL TIPS & TRICKSBY ZULKIFLI B MOHD AIN & KEE KAY LOKE
10
12
46
48
52
THE FEATURES
PEOPLE
10 M&E HACKS YOU NEED TO KNOW BY ABDUL FATAH & MUHAMMAD RIDHWAN
28
POPULAR ROLES IN AEC INDUSTRIES
43
TIPS & TRICKS
24
CAD RESOURCES 41
About 700 BC ago, the romans gave this month in which we write this issue, the Latin name – Aprillis. The traditional etymology is from the verb “aperire”, meaning “to open”, in allusion to the season when trees and flowers starts to blossom.
In part, that was our inspiration when we were assembling this issue. You would see a similar positive trait celebrated in our featured writers’ stories – developing a positive learning attitude and in other words, maintaining a quality of openness. Just like motivation, a positive learning attitude can be difficult to develop and maintain. However, it is possible if you commit yourself to think and act positively. One common principle we can see from a lot of management success books is – performance is a function of ability and attitude.
Speaking of learning, more contents are packed into this month’s Tips & Tricks and Resources columns to help you with refining your drafting skill: 6 Essential Tips & Tricks, 10 M&E Hacks You Need to Know and 5 BIM/CAD useful sites you can refer for SOS.
In months to come, we’ll be upping our content with more information for your learning as well, from tipping you with LTA text style standards to sharing engineers’ experiences and concerns that matter to you. Be sure to update yourself by visiting our employee’s blog, cadpro.sg and AcePLP’s Facebook page more often.
Finally, flip over to People’s column (Page 43 onwards) for part II on some of the popular roles in the industry and ways to survive this hot season.
In the meantime, we hope you will enjoy this issue; tips from our daily practitioners and much more about the life and craft of our featured engineers. Sometimes I find myself turning to our employees and engineers for inspiration. I leave you with lines from Tian Hock’s article “Having a goal is not enough, you need to have a learning attitude to work towards it”.
Here’s wishing you a May full of light and joy!
Shareen Tam
Shareen TamMAC Editor
4MAD About CAD
DISCOVER
innovative designsBY ACEPLP BIM/CAD ENGINEERS
5MAD About CAD
Rendering of a library café created using Autodesk Revit software.
Image courtesy of Nur Athirah Binte Razali (Batch 112).
RENDERING BY ACEPLP ENGINEERS
6MAD About CAD
Rendering of a 2-storey terrace created using Autodesk Revit software.
Image courtesy of Jonathan Lim (Batch 93).
RENDERING BY ACEPLP ENGINEERS
7MAD About CAD
Rendering of an office space created using Autodesk Revit software..
Image courtesy of Jeremy Loo (Batch 116)..
RENDERING BY ACEPLP ENGINEERS
8MAD About CAD
Rendering of a patio bar created using Autodesk Revit software.
Image courtesy of Tham Cheryl (Batch 117).
RENDERING BY ACEPLP ENGINEERS
9MAD About CAD
Ten years ago when I was studying in Temasek Polytechnic, CAD modelling was something that I always wanted to
explore. I graduated in year 2001 with a Diploma in Product Design Engineering.
During a career switch somewhere in year 2012, I ended up in landscaping industry. My duties ranged from handling
different types of projects with multiple time-frames and guidelines, to going through audits and inspections from
government bodies. Half a year later, AcePLP’s variety of advertisements caught my attention and this started me on my
current journey.
I went through six weeks of intensive in-house training and some of the classes were scheduled in the evening. The
training was divided into two weeks for AutoCAD, two weeks for MicroStation and another two for Revit. It was
strenuous to attend evening classes and in a blink of an eye, my batch mates and I are ready for our onsite attachments.
While waiting for my first attachment, I was roped into various in-house projects which involved the applications of
AutoCAD and Revit. I also had the opportunity to go for weekly BIM coordination meetings with BIM Coordinators,
Project Managers and external Engineers at client’s site office; mainly to discuss on how to resolve clashes between the
Plumbing and Sanitary (P&S) Services and other disciplines and at the same time, to understand the project requirements
and deliverables. As a new Engineer, it was an eye opening experience and because each project has its unique
challenges to overcome, I was able to hone my CAD drafting skills and knowledge. Getting to work alongside with our in-
house project coordinators and trainers has given me insights of what it is like working with the team.
Two months later, I went on my first onsite attachment as a BIM Modeller at Nylect Engineering Pte Ltd. I was working on
an international school building project and the BIM coordination had just began. On my first day, I was asked to produce
a model layout for the following day’s BIM coordination meeting. As the only BIM Modeller, there was no one there to
guide me at the client’s office and I was left to my own devices. Nevertheless, I managed to complete the work with the
skills and knowledge that I have acquired from my in-house project experience. Thereafter, I started to liaise with sub-
contractors and on some days, I would visit the actual site to check on the installation works and return back to office to
rectify discrepancies on the shop drawings. When I was four months into this assignment, I was approached by my Line
Manager to see if I am keen to take on a secondary BIM attachment which would run concurrently with my first. I was
eager to explore and therefore decided to take up this challenge.
Following that, my second attachment was a BIM assignment for Mixed Development project at Cyclet Electrical
Engineering Pte Ltd. I was mainly involved in CSD/SEM (Combined Services Drawing/ Structural Electrical and Mechanical)
submission, BIM modelling and coordination for M&E services for the respective levels.
FEATURED STORIES
“Having a goal is not enough, you need to have a learning attitude so that you can work towards it”.
by Lim Tian Hock
MAD About CAD
10
Page | 4MAD About CAD
In September 2014, I was given an opportunity to be promoted to the position of Assistant BIM/CAD Trainer. Being unsure of myself, I sought career advice from the HR team, my seniors, Trainers and the Line Managers and eventually, I decided to take on this challenging role in order to pursue my interest in Project Management. I started off with preparing training materials, conducting day and evening classes. Subsequently, I was also roped in to work on the in-house BIM Pilot projects.
I believe learning and teaching are inseparable. I found that even as I was mentoring the new Engineers, I was also learning new things. I also believe that there is a constant need for learning, so that we can continuously grow and become better. Even now as a Trainer, I seek for continuous learning and I am passionate to share the skills, knowledge and experiences that I have acquired with the next generation of Engineers.
The AEC industry remain as one of the most challenging industries to work in because of its constant technological advancements. However, it is an amazing and meaningful industry to be in as this industry touches and involves the lives of many people. We also work with people from all walks of life and together, we build a better place for everyone to live in.
Lastly, my advice for juniors is to have career goals so that you have something to work towards. But having a goal is not enough, you need to have a learning attitude so that you can work towards it. For me, I always feel that there is a learning experience that we can take away from each attachment, be it good or bad.
Picture of 4D BIM Pilot Team MembersFrom left: Lim Yong Shen, Lim Tian Hock, Low Ying Hui, Ng Yik Fei, Muhammad Ridhwan, Gan Jun Long
FEATURED STORIES
11
ESSENTIAL TIPS & TRICKS
BY ZUKIFLI BIN MOHD AIN & KEE KAY LOKE
MAD About CAD
12
1. Importing Layers
Do not re-use a CAD file to duplicate layers that you need.
Instead, convert the file to .lasfile format and import into your CAD file.
By doing so, you can prevent any file lagging or corruption.
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
MAD About CAD
TIPS & TRICKS - AUTOCAD
2. Block Layers and Editors
Always ensure to set your block to the default layer zero (0) in block editor, to avoid facing difficulty to assign your block to the required layering and colour.
13
3. ‘Divide’ Command
TIPS & TRICKS - AUTOCAD
Use command ‘Divide’ to section the object equally in a split of a second. Drop the traditional way of doing geometrical or lines calculation and follow these simple and fast steps:
1. Select the line object you want to divide.2. Type in the no. of segments for division. 3. Indicators will appear on your object for your selection (Ref to Fig. 1.0).
Fig. 1.0 Before applying command
Fig. 1.1 After applying command
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
14MAD About CAD
4. Setting Levels
TIPS & TRICKS - MICROSTATION
Having difficulties to assign your level to the respective objects? Follow these simple steps:
1. Go to Level Manager, check that your level is set to ‘By Level’ instead of ‘Overrides’ (Ref to Fig. 2.0).
2. Go to View Attributes and if your icon appears to be orange as shown in Fig.2.1, it means that Level Overrides is still active. Turn off the option in View Attributes and you will be able to assign desired levels to your respective objects.
Fig. 2.0 Level Manager
Fig. 2.1 View Attributes
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
MAD About CAD
15
5. Setting Wall Constraints
When placing a wall, always remember to input the upper limit of the wall. Otherwise the wall height will end up higher than the next storey.
TIPS & TRICKS - REVIT
6. Floor Plans Insertion
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
MAD About CAD
AutoCAD floor plans should be inserted to the Storey Plans instead of Site Plans.
A typical mistake of a wrong plan insertion is illustrated from the picture on the left.
Correct insertion of the AutoCAD floor plans to the respective levels will ease modelling process as the respective floors are segregated apart.
Wrong
Correct
16
I did Electronics (Computer & Networking) when I was still
studying in ITE. As the days went by, my enthusiasm in
engineering sector grew. Unlike other girls, I preferred to
craft, design, create and take on challenging tasks as my
hobbies. I would rather be repairing bicycles than playing
Barbie dolls. Don’t ask me why because I don’t have an
answer to your question.
After my ITE studies, I wanted to switch my interest but
was not willing to waste another 2 years just for another
NITEC certificate. I had a long break to consider if I wanted
to continue schooling or try my luck instead at searching
for a job with just a NITEC cert.
One morning, I tried my luck by sending my resume to a
Chinese company as a QC Technician, and was glad that I
made it. My QA Manager then told me that I was the
youngest and the only QC Technician with Electronics
background. It was okay for me though because I really
wanted to change my field of interest. From there on, I
have learnt about the Mechanical Industry’s expectation
and their standards. I was keen to learn anything as long as
it was not Electronics, and as per my expectations, this was
nothing like Electronics at all.
Not long after that, ITE called me and asked whether I was
interested in Higher Nitec. My mind-set totally changed at
that moment. I knew that education was important for my
future, especially because I was just only 18 years old.
I was given 2 days to think about it before they cancelled off my name from the list, in the end, I decided to pursue Higher NITEC.
Again, I had to serve 1½ years for my Higher NITEC for an Electronics Engineering certificate. I couldn’t switch to any other courses as the higher NITEC course was offered to me based on my current one. What I had to go through was much more complex than to my NITEC course. My practical examinations were no longer on just soldering a Printed Circuit Board (PCB), but more on protocols, cables for telephones/computers, IP addresses, WIFI as well as LAN & WAN networks through programming in the C# and C++ language.
Realising that my interest was not in Electronics, I knew I had to find a job which was not too dependent on Electronics, but could still make use of the basics. So while waiting for my Higher NITEC certificate, I looked for job opportunities. I did consider pursuing a part-time Diploma as well but eventually I gave it a miss.
As I browsed through JobStreet portal, I chanced upon AcePLP. I was quite curious about the job scope. I asked my friends studying Mechanics and they briefly explained to me what it was all about. I found it interesting and thus, I immediately sent my resume to them. I was then called up for an interview and made it through. Honestly, I didn’t have any knowledge in AutoCAD but when I saw the ribbons with icons, I felt kind of relieved because during my Secondary School years, I did a hands-on on CorelDraw so the icon just about saved my life! Thank God!
Every Project Is A New Gaining ExperienceSITI RAUDAH TALKS ABOUT HOW SHE MANAGED TO GO ON 3 DIFFERENT
PROJECTS, ALL DIFFERENT ASPECTS OF A BUILDING.
FEATURED STORIES
17MAD About CAD
How it all started…
On my first day, there were only 4 of us from Batch 96.
We had to learn AutoCAD 2D/3D, MicroStation 2D/3D and
Revit Architectural/Structural within 3 months. During
those 2 months or so, our schedule was so tight, with
assignments, homework and tests at the end of every 2
weeks.
If you were wondering what the difference is between
AutoCAD and MicroStation, it lies in the commands.
MicroStation uses numbering whereas AutoCAD uses
alphabetic. For 2D-wise, AutoCAD is more user-friendly
but MicroStation is more recommended for 3D modelling
as the graphics are better and the axis is easier to set. As
for Revit, it’s the best for 3D. It’s user-friendly and straight-
forward software where you don’t have to do 2D sections
based on the 3D drawings. Revit does it for you.
Ever heard about the night classes? Yes, I went through
that too. I picked up Tips & Tricks for AutoCAD &
MicroStation from Dave, CSD from Jack, Triforma from
Gregory, as well as Project Planning from Low Pak Sing.
They were generally really good in making the lessons
interesting although it may seem boring at times. You
won’t understand why you need it when you’re
undergoing In-House training but when you are doing your
on-the-job training, you’ll then realise the usefulness. Pay
attention during lessons because if not, I can ensure that
you’ll reap the benefits. You’ll appreciate that quality, time
& speed will make us stand-out from other drafters.
Experience at Honeywell Assignment
My first attachment was with Honeywell located at Changi Business Park. I was assigned as to draft schematic drawings for the Distribution Control System.
Distributed Control System (DCS) refers to a control system where its elements are not centrally located, but are distributed throughout the system with each component sub-system controlled by one or more controllers. The entire system of controllers is connected by networks for communication and monitoring. Generally, DCS is a very broad term used in variety of industries to monitor and control distributed equipment.
A DCS typically uses custom designed processors as controllers, also it uses both proprietary interconnections and communications protocol for communication. Input and output modules form component parts of the DCS. The processor receives information from input modules and sends information to output modules. The input modules receive information from input instruments in the process (or field) and transmit instructions to the output instruments in the field. Computer buses or electrical buses connect the processor and modules through multiplexer or de-multiplexers. Buses also connect the distributed controllers with the central controller and finally to the Human–machine interface (HMI) or control consoles.
The first drawings that I had to amend were the Electrical Components’ schematics in the As-Built drawings. I had 2 projects going on at the same time then. One was the SERAYA2 and the other was the Exxon Mobil. T, in which the drawings that I needed to amend and draw from scratch were the DCS board itself and also the component that had to be fixed inside it. Aside from this, I was also given a chance to draw a toggle/button switch based on the actual product. It was quite challenging but I managed to pull it through.
FEATURED STORIES
18MAD About CAD
Picture of Siti Raudah with AcePLP colleagues, Isa (Batch 94)and Qaiyum (Batch 95) at AcePLP Movie Night Event 2014!
Experience with SAA Architects Assignment
In SAA Architects, I was assigned as an Architect
Consultant, and worked closely with my Senior Technical
Manager. I was involved in one of their projects –
Northpoint City (Yishun Mixed Development) Project.
My first task was to draw a layout plan for the
Male/Female/Handicap Toilets, Pantry, Janitor and Family
Room for every level of the shopping centre. This was
totally different from the services which I’d seen in the
previous company I was attached to.
My senior technical manager (STM) provided me with
toilet drawings based on what he sketched on tracing
paper. From there, he guided me with the Architectural
drawings on how to understand it and I amended them
accordingly.
I considered myself very lucky because Harmeet – one of
my seniors at acePLP – was there too, to assist me with the
understanding of the drawings. He gave me tips so that I
wouldn’t make a lot of mistakes and to minimize the time
consumed drafting. Usually Architectural drawings are very
tedious and complicated to understand.
The drawings that I did were Tender Addendum 2 &
Tender Addendum 3. While waiting for Tender Addendum
3, I would help the technical manager out on the same
project but in a different sector, namely the roofing for the
boundary of the layout, section & elevation. That was for
URA submission.
It was such a nice experience working with them. The
environment is good and everyone is so friendly and
helpful. I even made friends with the drafters, architect,
assistant architect and receptionist.
. Here are some tips that I can share regarding the dimensions of objects:
• Entrance of the toilet (min. 1400mm)• Plaster thickness (25mm)• Wall thickness (100mm)• Center of cubicle to the other center of cubicle (900mm)• Handicap room area (2100mm x 2000mm)• Tiles (600mm x 600mm)• Center of wash hand basin to the other center of wash hand basin (750mm)• Wall from center of wash hand basin (400mm)
My workstation @
SAA Assignment!
FEATURED STORIES
19MAD About CAD
Experience with Active Fire Assignment
I did Fire Protection Services at Terminal 4, Changi Airport
Project for Active Fire. This project was on-site unlike the
previous ones. Everything was still raw and the building
was still being cast.
As usual, I took on yet a new service again. This time
round, I had to concentrate more on the Fire Protection
Services. My coordinator let me start off with one of the
Detail drawings for Hose reel & Dry Riser. I had 30mins to
complete it and managed to submit on time.
It was quite hard at first. They were so busy that even to
the extent that they cannot entertain my queries.
Therefore, I had to do my own homework and research for
the Fire Protection System and whatever else I was
handling. I didn’t understand it in the beginning because it
was quite complicated.
So for me to dig up more information, I asked the nearest
drafter. He told me about most of the services that we’re
handling, such as hose reel & dry riser, sprinkler, pipe
sleeve and water tank. There’s more to it, but they weren’t
the main services so I didn’t focus much on them.
It took me some time to remember the sizes of hose reel,
dry riser pipes and sleeves. I also did as-built, shop
drawings, concrete body plan and main terminal building
drawings – which is the most challenging part as it requires
sprinkler drawings. For shop drawings and concrete body
plan, I just did hose reel, dry riser penetration and sleeves.
These are a few tips I have for Fire Protection:• The center of Dry Riser pipe should be a minimum of 150mm away from the wall.• The center of Hosereel pipe should be a minimum of 100mm away from the wall.• Pipe size – Sprinkler Running Ratio should be as such:
3 - 326 - 409 - 50
18 - 65• The center of Dry Riser pipe should be a minimum of 150mm away from the wall.• Sprinkler Coverage has a radius of 1500mm from the center point of the Sprinkler.• Sprinkler to Sprinkler distance:Min. of 2000mm away for horizontal wallMin. of 1300mm away for vertical wallMin. of 2000mm for Sprinkler to Sprinkler OR average distance is 3000mm
Useful and advice for juniors•Do not forget to bring your thumb-drive or hard-drive with you and make sure to save a back-up copy of everything before you start amending any drawings.•Remember to change the LAYER, LINEWEIGHT and COLOUR accordingly•Do not forget to SAVE (if possible every 20mins) because when you are attached to a site area, you’ll frequently encounter power outages.•Double check your Titleblock as make sure that it is labelled as such: REVISION, DATE, NAME, DESCRIPTION, KEYPLAN/HATCH, DRAWING NO., PROJECT TITLE•Place GRIDLINEs, preferably one horizontal gridline and one vertical gridline per side•Avoid using YELLOW, CYAN or GREEN for texts.•Do your own checking before submitting•Ask your in-charge if you’re not sure BEFORE YOU PRINT
I’m Here!
Picture of Siti Raudah with clients from Active Fire, having Christmas dinner
FEATURED STORIES
20MAD About CAD
Rendering of Sports and Recreational Centre in Autodesk 360.
Image courtesy of Giuseppe Semprini and Autodesk.
RENDERING BY INDUSTRY PROFESSIONALS
21MAD About CAD
Rendering of a spine bridge in Autodesk 360.
Image courtesy of Trev G. and Autodesk
RENDERING BY INDUSTRY PROFESSIONALS
22MAD About CAD
Rendering of a chamber de vannes in Autodesk 360.
Image courtesy of Ludovic Malet and Autodesk.
RENDERING BY INDUSTRY PROFESSIONALS
23MAD About CAD
FEATURED STORIES
Before I joined AcePLP’s Apprenticeship Programme, I
worked as a free-lancer at NTU Alumni Affairs Office, with
ST Kinetics and UPS Pte Ltd helping to fund my part-time
diploma programme. After juggling between work and
studies for some time, I graduated in March 2012 with a
Diploma in Electrical and Electronics Engineering.
Job searching was a tough process and I had gotten several
rejected applications because I was just a fresh graduate
who did not have any relevant hands-on experience yet.
That was before I came to know about the AcePLP’s
Apprenticeship Programme on JobStreet.com. I was
enticed to apply for the Trainee CAD Engineer position as I
was already familiar with AutoCAD software, having scored
distinction for it during my poly days. At the same time,
this position will provide the opportunity for me to enter
the AEC industry.
Eventually I was selected for the position and I began my
career in the AEC industry.
I joined batch 76 and together with the rest of my three
batch mates (Daryl, Teck Seng and Firdaus) we started our
in-house training in December 2012. The training was
intensive but the in-house trainers were well-versed in
their respective areas and readily available to provide
guidance to us. Within two months, they had equipped us
with drafting techniques, conventions and technicalities in
AutoCAD, MicroStation and Revit.
My first onsite assignment was at Johnson Control(s) Pte
Ltd where I was assigned to assist Hisham, a senior AcePLP
CAD Engineer from batch 32.
My scope involved the drafting of Air Conditioning and
Mechanical Ventilation (ACMV) ducting on an architectural
layout based on the hand-drawn hardcopies using
AutoCAD software. As a new trainee, I had limited hands-
on knowledge on ACMV ducting and at the same time, we
were given very tight deadlines to complete the drawings.
Luckily for me, I was able to seek help from Hisham and we
made internal arrangements to split up the workload in
order to meet the requirement.
After the assignment at Johnson Control ended, I came
back to AcePLP headquarter and happened to meet
Hisham when he dropped by the office to print some
drawings. I was really happy and relieved when he told me
that my submitted drawings were approved with minor
comments. It meant a lot to me as I had put in so much
effort for its completion. Being in an unfamiliar
environment, I was really glad to see my senior and
thankful for all the guidance he has given to me.
My second assignment was an eye opening experience. I
was assigned to assist the Project Engineer of Deluge E&C
Pte Ltd (formerly known as Zenith E&C) on the ACMV
drawings for the “V on Shenton” project; a big mix-used
development situated in Shenton Way, formerly named as
the UIC Building but was later redeveloped to meet market
demands. This is where my on-the-job training really
began. During the first three months, I was working from
the client’s headquarter at Chin Bee Drive. Although I had
limited knowledge on ACMV and Chilled Water System
(CHW), the Project Engineer (PE) was very patient in
assisting me.
THE OTHER ANG BROTHERKENDRICK IS THE YOUNGER BROTHER OF ALUMNI, ANG HUAT BOON (BATCH 39) SPEAKS ABOUT
HIS LEARNING JOURNEY AT ACEPLP.
24MAD About CAD
Shenton on V
25MAD About CAD
FEATURED STORIES
In July 2013, the project team was shifted to the site office
at Shenton Way and I was given the opportunity to
experience what it is like being on the field.
The project was not without its adversity; there was an
internal communication breakdown which made the
process more complicated. It started when the ACMV
drawings I produced were constantly rejected. The
feedback given was that the architectural plan I made was
not from the most updated version. I reckoned something
was amiss and initiated to compare the drawings in my
folder against the drawings that were rejected by the main
contractor. To my surprise, it was a different set of
drawings; the architectural layout, ducting layout and
ACMV equipment were changed without my knowledge.
Upon learning of this, I immediately informed the Project
Engineer of my findings and not long after, the project
team was relocated to Bestway Building to resolve the
issue. Miscommunication would be the most common
difficulty a person will encounter especially being in a
diverse industry.
Besides acquiring technical knowledge on M&E, ACMV and
CHW systems from this assignment, I have also learnt
many other things from on-the-job such as the preparation
of transmittal forms for submission to the Main
Contractor, troubleshooting and understanding how
different plotter machines work, how the wireless and
fibre broadband runs for the whole site office as well as
new AutoCAD commands exchanged with Deluge’s
permanent drafter.
My next assignment was at Wah Loon Engineering Pte Ltd.
I was tasked to assist with the Equinix SG3 IBX Data Centre
project on the ACMV system. Everything went on quite
smoothly except that I was facing difficulties managing my
workload efficiently; engineers from different projects
would approach me for multiple amendments on the same
drawings throughout the day, which caused disruptions to
the current projects I was handling. I provided my
feedback to the Drafting Manager and was relieved from
the heavy workload. A few months later, I was relocated
from the Wah Loon headquarters to the project site at
Ayer Rajah Crescent. As I was able to leverage on the
experience acquired from the previous assignment, I knew
what needed to be done on the drawings for submissions
and initiated to print the drawings for their Engineers for
site inspection.
The Engineers were very satisfied with my drawings as it’s
handy for them during site inspection. During my
assignment at Wah Loon, I also participated on minor
amendment works for Electrical, Fire Protection and
Plumbing and Sanitary systems.
From my assignments, I observed that drafting is an
essential skill that one needs to acquire especially in the
AEC Industries. There is always a demand for drafting work
as they are many on-going projects; new lands will be
developed and old buildings / lands will be redeveloped.
Besides acquiring drafting skills, the assignments also build
up my technical knowledge which will help me to advance
to a professional Engineer in the future.
Kendrick Ang at Site Office
26MAD About CAD
FEATURED STORIES
Here are a few advices I wish to provide for my juniors whom are preparing to embark on their onsite assignments:
1. Be humble and honest.
2. Always possess a positive learning attitude
3. Every company has their unique drafting standards. Always be flexible and adaptive to the client’s requirements, be it
individual drafting standards or company’s standards.
4. Don’t be afraid to clarify when in doubt. However, also inject some initiatives to find answers to your questions such
researching through the internet or reference books, seeking help from in-house trainers etc.
5. Practice makes perfect. In your spare time, try to practice your drafting skills on various CAD platforms such as
AutoCAD, MicroStation and Revit. For me, I’ve injected a little fun in my practice. I like to collect Gundam plastic model
kits and hence, I will insert pictures of the kits into the CAD platform to trace them out and then hatch the colours that
I like to the drawings. By doing so, I can improve on my drafting speed, practice my skills and shortcuts and have fun at
the same time.
Lastly, I would like to thank AcePLP and my colleagues for the help and opportunities that they have given to me during my
apprenticeship. It was an enriching experience.
Construction Site
Have friends or relatives youwish to refer to join ourapprenticeship programme?Check on page 48 on AcePLPEmployee Referral Programmeand the attractive rewardsavailable!
The Ang Brothers!
The Ang Brothers: AcePLP Alumni Ang Huat Boon (left) and Kendrick Ang.
27MAD About CAD
M&E HACKSYOU NEED TO KNOW
BY ABDUL FATAH BIN ABDUL JAMAL AND MUHAMMAD RIDHWAN BIN RAHIM
TIPS & TRICKS
28MAD About CAD
10 M&E HACKS YOU NEED TO KNOW
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
29MAD About CAD
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
The Manual call point, Alarm bell and Hose reel will always be near each other.
10 M&E HACKS YOU NEED TO KNOW
30MAD About CAD
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
• There are some of the sprinklers that are frequently used in projects Exposed sprinklers head (can be seen easily from the drawing) Concealed sprinkler head (cannot be seen easily as its placed between
the false ceiling and the slab) Flush type sprinkler head Side-wall sprinkler Dry pendant sprinkler
10 M&E HACKS YOU NEED TO KNOW
31MAD About CAD
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
• The pipe size will increase as the number of sprinkler increases (ref to diagram above)
0 < 3 = Ø32 4 < 6 = Ø40 7 < 9 = Ø50 10 < 18 = Ø65 19 ~ = Ø80/100/150
10 M&E HACKS YOU NEED TO KNOW
32MAD About CAD
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
• At times, the same location may have 2 to 3 different type of sprinklers. Ensure that you know what type of sprinkler is being used in that particular area.
• Most sprinklers does not share a same branch out pipe as they each have different pressure.
• There will always be duct sprinklers are ducting areas.
10 M&E HACKS YOU NEED TO KNOW
33MAD About CAD
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
Fig 1. Worksets for a typical host file
Fig 2. Current Active Workset
Fig 3. Electrical Cable Tray in Sanitary Layout
10 M&E HACKS YOU NEED TO KNOW
34MAD About CAD
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
Fig 4. Create/ Apply/ Manage View Template
View TemplatesMake use of View Templates for Quick Setup of Layouts/Sections/3D Views.
Reduce the hassle of going through Visibility/Graphic options for each layout for the same Service Drawing. When you are dealing with tens of drawings and you forget to off a certain element layer, View templates will save all the troubles.
Step1: Apply a template to a layout and click ok.
Step 2: Select the Layout View Template in Properties Tab and select “None” and click ok.This allows a layout to absorb a templates property and edited according to your wish, without adjusting the main template.
Fig 5. Select View Template to use
10 M&E HACKS YOU NEED TO KNOW
35MAD About CAD
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
Fig. 6 Control Panel Family Symbols
Symbol Visibility Parameters For FamilyVisibility parameters is very useful and can be used for many different
applications. Using 1 Family to manipulate different symbols for an element.
10 M&E HACKS YOU NEED TO KNOW
36MAD About CAD
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
10 M&E HACKS YOU NEED TO KNOW
37MAD About CAD
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
10 M&E HACKS YOU NEED TO KNOW
38MAD About CAD
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
10 M&E HACKS YOU NEED TO KNOW
39MAD About CAD
Eager to share your Tips & Tricks? Send in your contributions to media@aceplp.com.sg.
Read page 50 on how you stand to win Starbucks vouchers!
10 M&E HACKS YOU NEED TO KNOW
40MAD About CAD
CAD FORUM
Free tips & tricks, blocks anddiscussion to AutoCAD, LT, Inventor,Revit, 3Ds Max and other… Ten LinksNo. 1 Tips Site and Site of the Weekaward.
http://www.cadforum.cz
http://www.cadtutor.net/
CAD TUTOR
CAD Tutor delivers the best freetutorials and articles for AutoCAD,3Ds Max and … it’s monthly articlebrings you the best up-to-dateAutoCAD tips and tricks. In additionto the text-based tutorials, videotutorials are also made available.
THE ARCHITECTURE STUDENT
A one stop information sharing hubfor Architectural services, rangingfrom AutoCAD tips to photoshop tips,rendering tips and even urban designtips!
http://192.168.1.150/wordpress/wp-content/uploads/2015/03/thearchistudent.png
CAD online41
MAD About CAD
TIPS & TRICKS - RESOURCES
CAD online
AEC DEVBLOG
Maintained by Autodesk’s developertechnical services (DevTech) team,the site offers good resource formanagers and developers using Revit,Navisworks and other Autodeskproducts. Where else do you think, isa better place to obtain accuratetechnical information from? http://adndevblog.typepad.com
/aec/about-this-blog.html
http://beyonddesign.typepad.com/posts/
BEYOND DESIGN
Beyond Design has been a key assetfor BIM managers since 2009. Thesite is maintained and updated byAutodesk’s Naviswork team andcovers an array of tips and tricks, bestpractices and insider knowledge foryou to have a better grasp of the BIMsoftware functionality andmanagement.
More CAD and BIM resources
in the next publication of MAC newsletter!
Visit Cadpro.sg for more resources.
42MAD About CAD
TIPS & TRICKS - RESOURCES
Responsibilities• Provide technical support in various stages of
project, including conceptual design, design development, contract documentation, authority submissions, contract administration, site meetings and etc.
• Prepare schematic design, layout, calculations, technical reports and specifications and etc.
• Liaise with external consultant teams, architects, contractors and suppliers to resolve project issues
• Supervise and review the work of Assistant Engineers, Designers and/or Drafters in the project team
• Discuss and propose solutions to technical issues and improvement on design standards
• Develop technical knowledge and competency
Requirements• Degree or Diploma in any discipline - Architectural/
Structural/ Mechanical/ Electrical • 2-3 years related work experience• Ability to deliver ideas and conceptualise system
design• Proficient in the use of AutoCAD and MicroStation
Popular roles in AEC Industries
DESIGN ENGINEER
43MAD About CAD
BIM MANAGER (PROJECT)
Responsibilities• Prepare and implement BIM execution Plan for
projects/tender• Examine and evaluate BIM goal and Uses• Integrate information from different stakeholders
of the construction and ensure no dilution of responsibility between the project design team and the contractor
• Responsibility Matrix• BIM Deliverables• Delivery Schedules• BIM Modelling quality Control• BIM Coordination• Responsible for BIM standards development,
implementation, and enforcement• Assist project teams in BIM project setup
Requirements• Diploma/Degree in Architecture/ Civil Structure/
Construction/ MEP related • Experience in BIM software • Knowledgeable in local MEP BIM e-submission
process, requirements and guidelines• Completed BCA Academy’s BIM Modelling and/ or
BIM Management or similar courses
PROJECT COORDINATOR
Responsibilities• Attend client meetings and assist with
determination of project requirements • Prepare project organization and communication
charts • Use project scheduling and control tools to monitor
projects plans, work hours, budgets and expenditures
• Track project milestones, develop and deliver progress reports with requirements documentations and presentations.
• Preparation of quotations, specs, schedules, progress & delivery reports
• Review field inspection reports from Consultants throughout the lifecycle of the project
• Issue Contracts, Letters of Intent, Purchase Orders, etc.
• Maintain Contract Execution Tracking Log
Requirements• Diploma/Degree in Architectural Technology,
Quantity Survey, Civil Engineering, Project/Construction Management, M&E related discipline
• At least 2 years of working experience in the related field
• Knowledge in AutoCAD, MS Project and/or Primavera
• Proficient in Microsoft Office• Resourceful and able to work independently with
minimal supervision• Able to read Architectural/ Structure/ M&E
drawings
Photo: Randi Silberman Klett
44MAD About CAD
MECHANICAL AND ELECTRICAL
COORDINATORResponsibilities• To develop a schedule program for the
commencement and completion of all M&E works to meet the master schedule
• To coordinate, monitor, and control M&E sub-contractors’ progress and quality of works
• To coordinate sub-contractors work so that there are no conflicts amongst sub-contractors
• To liaise with suppliers on the product needed for the projects and delivery schedule
• To carry out submission to consultants for materials, drawings and method statements approvals before commencement at work
• To incorporate structural and M&E elements in preparation and production of coordination drawings
• Assist in the deployment and storage of M&E materials, plant and equipment delivered by the M&E subcontractors
• To arrange for testing of M&E materials and equipment function test
• Assist Quantity Surveyor to carry out verifications for various claims
• Contract administration of M&E subcontracts • Updating M&E drawings
Requirements• Degree or Diploma in Mechanical, Electrical, or
Construction Building Services • Minimum 3-5 years of relevant experience in the
construction supervision of M&E building services• Capable of leading the CSD coordination, managing
design interface, coordination for construction project, chairing coordination meeting
• Experience in HDB/ Condo/ Transit/ MRT/ Tunnel will be an advantage
• Knowledge of AutoCAD would be an advantage • Proficient in using Microsoft Office • Must have local contractor experience • Familiar with our local building standard quality
implementation, BCA CONQUAS and Quality Marks Assessment and Safety aspects in the construction industry
45MAD About CAD
Follow us and learn more
about other POPULAR ROLES
in the next publication of
Mad About CAD!
HOT WEATHER HEALTH
SURVIVAL GUIDE!
You might have noticed that March has
been a good month for outdoor
activities, with very little rain to put a
damper on that picnic or cycling
expedition even as grass in parks turn
brown. However, this dry spell is
expected to continue till April and May.
Here are some tips on how you can stay
healthy, even in warmer and dryer
season…
Fans can complement air-conditioners and
help them run more efficiently which is better
for the environment, and significantly reduces
electricity bills. Run a fan to remove humidity
and removes heat away from your body.
1. “VENT” A LOT
Swig often. To replace the moisture that you
lose as you perspire, be sure to drink. As you
lose water to dehydration, your body
temperature rises, so replacing fluids is
essential to keeping cool. Avoid beverages
that contain alcohol, caffeine, or lots of sugar,
which are dehydrating. “Also opt for hydrating
foods," says Deena Kastor, a marathon runner
and an Olympic bronze medallist. "Try a
smoothie for lunch, and add more fruits and
vegetables to all your meals. Watermelon has
the greatest water content of any food out
there."
2. STAY HYDRATED
There's a reason we reach for salads in the
summer. They're easier to digest than, say, a
fatty hamburger, which leaves you feeling
sluggish in the high heat. Instead, go for fruits
and vegetables, which are watery and help
keep you hydrated (and cooler).
3. EAT LIGHT
46MAD About CAD
Maintain a healthy lifestyle by bringing your
exercise routine indoor. Head to the nearest
gym or take up an aerobic activity to keep
your heart pumping strong and healthy. On
warmer days, limit your outdoor refreshing
activities to biking, swimming and evening
hikes. Reconnecting with these activities will
help keep your body and mind aligned.
4. KEEP YOUR BODY TEMPERATURE DOWN
4. INDOOR EXERCISE
Fill buckets or basins and soak your feet. Wet
towels and bandannas can have a cooling
effect when worn on the shoulders or head.
Take cool showers or baths, and consider using
a spray bottle filled with cold water for
refreshing spritzes throughout the day. If you
are planning on when to do your Ice Bucket
Challenge, how about doing it now?
Staff shall receive a healthy
lifestyle bonus for every
continuous 12 months period
if there are no medical
claims made.
47MAD About CAD
48MAD About CAD
FANCY OR NOT, HERE’S
WHAT WE’VE BEEN UP
TO LATELY…By tagging or participating on @AcePLP, #Aceplp, #AcePLP_sg, #AcePLPSNAPS! Or any topics or groups started by AcePLP on Facebook, Twitter and/orInstagram, you grant us permission to use or reproduce your contributing post, tag, image and handle on Facebook, Twitter or Instagram in relation to any media.
HUAT AH!
49MAD About CAD
Had a blast at your latest assignment?
Got some useful tips & tricks?
Share your on-site experience with the
MAD about CAD team! If your
contribution is featured in our
magazine or CADPRO, you will
receive a loaded Starbucks card!
Send in your contributions to media@aceplp.com.sg. Our team will be in touch shortly!
Receive a LOADED Starbucks Card
Other than the promise of free coffee, you get: -
• Your article professionally presented with
copy-editing by the MAC team
• To enhance your professionalism by featuring
article on your LinkedIN page
• A link-back from the article on CADPRO to
your LinkedIN page
50MAD About CAD
Happy Birthday
So we heard there’s some birthday boys and girls in the house.
Mar
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31
• 1 Noor Erdyani• 4 Pilapil James C
Wang Feng• 5 Yin Tao • 6 Kee Kay Loke• 8 Yu Haining• 10 Chong Swee Kuan• 13 Abdul Qaiyum B Abdul Rahman• 15 Syed Nazri B Syed Shamshudin
Chong Meng KiangNur Muhammad
• 16 Allan Chris • 21 Muhammad ‘Izzat• 25 Tan Han Kiong• 27 Mariam • 28 Shen Jiayu
• 1 Muhammad Fadhil B Merlan• 2 Jacqueline Tang • 6 Song Zhuang • 11 Gladymaire• 16 Siti Nurshahrain• 19 James Tang
Ashley Arvind• 21 Muhammad Izdihar• 25 Kamaraj S/O Sellah• 28 Dy Francis Jiehan• 29 Hannah Leah
• 1 Nur Hazwanny• 3 Yang Kaisheng• 7 Nor Hafizah• 8 Liu Huan Huan• 9 Yeo Si Wei • 10 Tan Gan Sen • 11 Tan Yong Jian • 15 Rusydiah BT Mohamed Noor• 16 Lee Xihui• 19 Tan Sze Hong, Eric • 21 Mai Xiangjie• 23 Chan Tsz Kin • 26 Liu Zhi Yang
Muhammad RidhwanSiti Raudah
• 30 Julie Ann
In celebration of this joyous occasion, we have prepared a little gift for you.
Write in to hr@aceplp.com.sg to confirm your collection appointment.
Feb
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
Apr
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30
51MAD About CAD
CORPORATE HEADQUARTERS159 Sin Ming Road #05-03/04 (Lobby 1), Amtech Building Singapore 575625
BRANCH OFFICE26 Boon Lay Way #01-78 Tradehub 21 Singapore 609970
T: +65 6455 9938 F: +65 6455 2232
Website: http://www.aceplp.com.sgE-mail: enquiry@aceplp.com.sg
LATEST ADDITIONS TO THE FAMILY
We welcome eighteen new faces to the team!
Finance Aerikah Binti Jaafar
Human ResourceJoshua Yong
ITLee Kok Hui
AdminMarianne Mirambel
Line Manager Gretchel Gupit
DROP BY & SAY HI
BIM/CAD Trainees Mark Tan KuganeswariPoovanJiang Yuan Jie Seah Yew Hock Nur AsarinNoor Hafiz Muhammad ZakieMuhammad FarheenDong ZiliangMohamed ZuhairiRazmi HarizLouise Anne
top related