install & set 3m qs1000 - mk2 at9000 passport … install & set 3m qs1000 - mk2 at9000...
Post on 25-Apr-2019
237 Views
Preview:
TRANSCRIPT
1
Install & Set 3M QS1000 - MK2 AT9000 Passport Reader Driver
Virgo Technical Support team welcomes all inquiries and is ready to
provide free technical support to install and set the reader, through
direct access to technical support:
https://goo.gl/LHzPd2
Define the electronic reader within the computer:
Download the file from the link below if windows 64bit
http://downloads.idscan.net/3M%20Page%20Reader%20SDK%20x64%203.3.3.10%20Setup.exe
Or download the file from the link below if windows 32bit
http://downloads.idscan.net/3M%20Page%20Reader%20SDK%203.3.3.10%20Setup.exe
then the application Run as administrator
13
From tap Security choose your user and click Edit, give your user the permission for authenticated user is Full control and click OK
14
From 3M Reader Expo screen choose Change Save Directory from Image menu, and choose folder Data then click Open
16
From Scheme menu we choose for example QS1000 then click Select
then from tap Selected Panels we need to following options:
- Document Summary
- ePassport : when exist RFID but in QS1000 not exist, so not check option.
- IR Image
- Machine Readable Zone
- Visible Image
17
Then click Save Changes and click Select
When this becomes the reader state is Enabled as shown below screen
19
Note: If the RFID chip image isn't read, we make sure the Capture minimal RF data, using DG1 and DG2 option is activated on tap Scheme Options.
21
Finally, we go to the System settings Virgo Offline from Other menu
from tap General choose Reader Path D:\Virgo\VirgoOffline1438\Data and Passport Reader type is 3M Full Page also, we choose External Reader Application then click OK
top related