in-hole toolsimgusr.tradekey.com/images/uploadedimages/... · 10 latch compression spring 11 upper...
Post on 09-Aug-2020
2 Views
Preview:
TRANSCRIPT
JEOGES PRODUCT CATALOUGE 2012
IN-HOLE TOOLS
o Core Barrels
o Head Assemblies
DIAMOND PRODUCTS
o Impregnated Drill Bits
o Casing Shoe Bits
o Reaming Shells
OTHER EQUIPMENTS
o Water Swivel
o Hoisting Plugs
o Over-Shot
o Recovery Tools
SAMPLING ACCESSORIES
o Plastic Core Boxes
o Sample Bags
DRILLING ADDITIVIES
o Bentonite
o PHPA Polymer
o PAC-HV,R,LV
DIGITAL SURVEY AND TEST TOOLS
o Packer Test Tool
o Lugeon Test Tool
o Drill Rig Remote Monitoring
Tool
MUD PUMPS
o Diesel Mud Pumps with Pancar
Engine
o Service & Spare Parts
JEOGES PRODUCT CATALOUGE 2012
1. IN-HOLE TOOLS
NQ Core Barrel
ID# Part # Description
1 Head Assembly
2 Inner Tube 1,5 m.
İnner Tube 3,0 m.
3 Outer Tube 1,5 m.
Outer Tube 3,0 m.
4 Locking Coupling
5 Adaptor Coupling
6 Inner Tube Stabilizier
7 Landing Shoulder
8 Stop Ring
9 Core Lifter
10 Core Lifter Case
NQ Head Assembly
ID# Part # Description
1 Spearhead Point
2 Compression Spring
3 Detent Plunger
4 Spearhead Base
5 Spirol Pin 7/16” X 1”
6 Latch Retracting Case
7 Spring Pin ½” X 2”
8 Nylok Bolt 3/8” – 16 UNC X ¾”
9 Washer
10 Latch Compression Spring
11 Upper Latch Body
12 Latch
13 Link
14 Spring Pin ½” X 1-1/2”
15 Stainless Steel Ball, 22 mm
16 Indicator Bushing
17 Landing Shoulder
18 Lower Latch Body
19 Washer
20 Hex Nut
21 Spindle
22 Shut-Off Valve, Hard
23 Valve Adjusting Washer
24 Thrust Bearing
25 Spindle Bushing
26 Hanger Bearing
27 Compression Spring
28 Stover Lock Nut
29 Inner Tube Cap
30 Stainless Steel Ball, 22,0 mm
31 Check Valve Body
32 Grease Fitting
JEOGES PRODUCT CATALOUGE 2012
HQ Core Barrel
ID# Part # Description
1 Head Assembly
2 Inner Tube 1,5 m.
İnner Tube 3,0 m.
3 Outer Tube 1,5 m.
Outer Tube 3,0 m.
4 Locking Coupling
5 Adaptor Coupling
6 Inner Tube Stabilizier
7 Landing Shoulder
8 Stop Ring
9 Core Lifter
10 Core Lifter Case
HQ Head Assembly
ID# Part # Description
1 Spearhead Point
2 Compression Spring
3 Detent Plunger
4 Spearhead Base
5 Spirol Pin 7/16” X 1”
6 Latch Retracting Case
7 Spring Pin ½” X 2-3/4”
8 Nylok Bolt 3/8” – 16UNC X ¾ C/SCR
9 Washer
10 Compression Spring
11 Upper Latch Body
12 Latch
13 Link
14 Spring Pin ½” X 2”
15 Stainless Steel Ball, 22 mm
16 Indicator Bushing
17 Landing Shoulder
18 Lower Latch Body
19 Washer
20 Hex Nut
21 Spindle
22 Shut-Off Valve, Hard
23 Valve Adjusting Washer
24 Thrust Bearing
25 Spindle Bushing
26 Hanger Bearing
27 Compression Spring
28 Stover Lock nut
29 Inner Tube Cap
30 Stainless Steel Ball 22,0 mm
31 Check Valve Body
32 Grease Fitting
JEOGES PRODUCT CATALOUGE 2012
PQ Core Barrel
ID # PART # Description
1 Head Assembly
2 Inner Tube 1,5 m.
İnner Tube 3,0 m.
3 Outer Tube 1,5 m.
Outer Tube 3,0 m.
4 Locking Coupling
5 Adaptor Coupling
6 Inner Tube Stabilizier
7 Landing Shoulder
8 Stop Ring
9 Core Lifter
10 Core Lifter Case
PQ Gömlek Başlıkları
ID# PART # Description
1 Spearhead Point
2 Compression Spring
3 Detent Plunger
4 Spearhead Base
5 Spirol Pin 7/16” X 1”
6 Latch Retracting Case
7 Spring Pin ½” X 2-3/4”
8 C/SCR, HH 3/8 – 16 ¾” G8/Nylok
9 Washer
10 Compression Spring
11 Upper Latch Body
12 Latch
13 Link
14 Spring Pin ½” X 2”
15 Landing Shoulder
16 Piston Valve
17 Spirol Pin ¼ X 2 ¾” LG
18 Fluid Retention Bushing
19 Fluid Retention Light Spring
20 Lower Latch Body
21 Washer
22 Nut, Hex 1-1/2 UNC G8
23 Hollow Spindle
24 Shut-Off Valve, Hard
25 Shut-Off Valve Washer
26 Tapered Shut-Off Valve Washer
27 Ball Thrust Bearing
28 Spindle Bushing
29 Grease Fitting
30 Compression Spring
31 Washer
32 Nylok Nut
33 Check Valve Bocy
34 Stainless Steel Ball, 22 mm
35 Valve Bushing
36 Inner Tube Cap
JEOGES PRODUCT CATALOUGE 2012
2. DIAMOND PRODUCT
Impregnated Drill Bit
Jeoges produces diamonds in 4 different series and with 3
different (6mm, 9mm, 12mm) matrix heights
1) Economy Series (JE SERIE)
2) Standard Series (JS SERIE)
3) Extreme Series (JX SERIE)
4) Torque Serries (JT SERIE)
Casing Shoe
The W thread casing shoes are produced in 4 different diameters.
PW
HW
NW
BW
ROCK GROUP
FORMATION DESCRIPTION ROCK TYPE ECONOMY SERIES
STANDART SERIES
EXTREME SERIES
TORQUE SERIES
1-4 Soft to medium hard, Very abrasive to slightly abrasive, Very fractured to slightly broken
Unmetamorphosed or weakly metamorphosed shales, Sandstone and limestone
JE 1-5 JS 1-5
JX 1-4
JT 1 SERIE
5 Medium hard, Abrasive, Moderately fractured to slightly broken
Limestone and dolomite. Weathered granite and gneiss. Serpentinite and metaperidotite.
JX 5-9
JT 2 SERIE
6 Medium hard, Moderately abrasive, Moderataly fractured to slightly broken
Unmetamorphosed or weakly metamorphosed diorite. Gabrro, Peridotite and gneiss. Basalt, andesite.
JE 6-8
JS 6-7 JT 3 SERIE
7 Medium hard - hard, Moderately abrasive. Slightly fractured to competent
Metabasalt, amphibolite. Metamorphosed diorite and gabrro. Diabase
8 Hard, Slightly abrasive, Competent Quartz rich skarn. Granite and pegmatite.
JS 8-10
JT 4 SERIE
9 Very hard, Slightly abrasive, Very comptent
Metamorphosed granitic rock and quartz rich gneiss.
JE 9-10
JT 5 SERIE
JX 9-10 10
Extremly hard, Non-abrasive, Fine grained, Very competent
Chert and jasperite, Quartzite. Highly metamorphosed volcanic.
JT 6 SERIE
JEOGES PRODUCT CATALOUGE 2012
4. OTHER EQUİPMENTS
Over-Shot
ID# PART # Description
1 Cap Screw
2 Washer
3 Overshot Cap
4 Overshot Spring
5 Overshot Sleeve
6 Compression Spring
7 Steel Ball
8 Over-shot Head
9 Lifting Dog Compression Spring
10 Lifting Dog
11 Plain Pin ½” X 1-15/16”
12 Spring Pin ¼” X 1-3/4”
13 Lockin Pin
14 Nylok Set Screw
Recovery Tools
Recovery Taps
Recovery taps are produced in 3 different diameters:
o NQ / BW o HQ / NW o PQ / HW
Casing Cutters
Casing cutters are produced in 3 different diameters:
o NQ Casing cutter o HQ Casing cutter o PQ Casing cutter
JEOGES PRODUCT CATALOUGE 2012
4. PLASTIC CORE BOXES
Heavy duty type, light weight core boxes are designed for the storage and the carriage of core samples. The special core boxes are made of polypropylene. For the case of usage and storage under direct sunlight, boxes are strengthened against UV with special additives. They can be used in rough climate conditions between +50◦ C to - 35◦ C. Jeoges Core boxes are made in three different sizes. Movement of the core samples during transport is prevented with the rigid seperators. Drill hole and interval information is easily stamped or printed on the boxes. Jeoges core boxes can be used with or without lids. Lids lock the box by itself. Core boxes can be handled by one single person easily. It is ideal for the places where access is limited. The lid is common for all sizes.
PQ CORE BOX
HQ CORE BOX
NQ CORE BOX
DIMENSIONS & TECHINICAL DATA
PQ CORE BOXES Part #: 01030301P
Core Diameter (mm) 65 - 86
Core Capacity 3 x 1 m
Dimensions(cm) 107*34*10
Weight (kg) 2.2
Packing Type Unitself
HQ CORE BOXES Part #: 01030301H
Core Diameter (mm) 49 - 64
Core Capacity 4 x 1 m
Dimensions (cm) 107*34*8
Weight (kg) 2.1
Packing Type Unitself
NQ CORE BOXES Part #: 01030301N
Core Diameter (mm)
37 - 48
Core Capacity 5 x 1 m
Dimensions (cm) 107*34*6
Weight (kg) 2.0
Packing Type Unitself
PLASTIC LID (Standart) Part #: 01030302
Dimensions (cm) 107*34*2
Weight (kg) 0.9
Packing Type 25 pcs Carton Box
IC
PQ CORE BLOCKER
Part #: 01030303P
HQ CORE BLOCKER
Part #: 01030303H
NQ CORE BLOCKER
Part #: 01030303N
JEOGES PRODUCT CATALOUGE 2012
5. DRILLING ADDITIVIES
Drilling Bentonite
High quality sodium activated high yielding bentonite made for all types
of drilling specially deep hole core drilling, produced according to API
Spec 13 a Section 9 and ISO EN 13500 Sec 9.
PHYSICAL PROPERTIES
Color yellow
Methylene Blue Value 340 mg/gram
Montmorillonite Content > 85%
Moisture Content 11% (on base of dry product)
OCMA Yield 19,5 m³ per ton bentonite
API fluid loss 14 ml
pH (6,5% slurry ) 10,4
RESULTS OF MEASUREMENTS ON SLURRIES
TEST UNIT BENTONITE (GRAM/LITER)
30 40 50 60 70 80
Fan Viscosity
600 reading
12 22 31 43 49 70
300 reading
6 16 23 32 40 61
PV/YP (API) (plastic
viscosity/yield point)
3/6 10/6 8/15 11/21 9/31 9/52
PV/YP Ratio
2 1,7 1,9 1,9 3,4 5,8
Marshfunnel Viscosity
sec/liter
Fluid Loss ml/30
sec. 20 20 19 17 15 12
Density gr./liter 1013 1014 1016 1027 1029 1038
STORAGE On a dry location, avoid moisture
PACKING 35 kg polyproplylene bags, 1.200 kg big bags, bulk 25 ton silotrucks
PHPA (PARTIALLY HYDROLYZED POLYACRYLAMIDE)
APPLICATION
Shale stabilization Viscosifier Friction reduction Fluid loss control Lubrication
Specifications For PHPA:
POLYMER MIXING To obtain homogeneous solution, efficient dispersion is necessary. The
most convenient method of dispersing these products is with a polymer
eductor or a commercially available dry powder feeder unit. Solution
should be made up at 0.1-0.3% solid. Make-up water temperature
should be between 10℃ and 40℃ for optimum product performance.
Following dispersion into agitated water, stirring should continue for
about an hour to ensure complete dissolution. Stirring maybe carried out
by propeller type stirrer with a speed of 200-500 rpm. It is
recommended to have both a stock make-up tank and a solution holding
tank for dosage into the system. The above recommended anionic
solution concentration are stable for up to one week. Aluminum, zinc,
copper, or iron should be avoided in make-up system.
STORAGE On a dry location, avoid moisture
PACKING 25 kg carton bags.
Appearance off white powder
Degree of charge, % 15 - 45
Molecular weight, million 5 - 20
Solid content, % 89 min
JEOGES PRODUCT CATALOUGE 2012
Pac® HVPoly Anionic Cellulose
APPERANCE Free flowing off-white powder
APPLICATION PAC-HV is for water-based drilling fluids,which can effectively reduces
the filtration rate of many water-based oil and gas drilling fluids and may
also be used to increase and stabilize viscosity to improve hole cleaning
and suspension properties in a wide variety of fluid environments.
Physical & Chemical Specifications For PAC :
Performance In Mud:
Fluid loss
ml, Adding 0.57 % (2ppb) 20 max.
ml, Adding 0.86% (3ppb) 15 max.
ml, Adding 1.14% (4ppb) 10 max.
Yield Point
YP, Adding 0.57% (2ppb) 2.4Pa (5lb/100sq.ft) min.
YP, Adding 0.86% (3ppb) 9.6Pa (20lb/100sq.ft) min.
YP, Adding 1.14% (4ppb) 19.2Pa (40lb/100sq.ft)min.
Mud making volume
Item Distilled water 40g / l Salt water
Saturated water
Mud making volume, M3 / T
400 min. 230 min. 280 min.
STORAGE
On a dry location, avoid moisture
PACKING
25 kg carton bags.
Item Quality index
Purity,% (on dry base) 95.0 min.
Viscosity PAC-HV (Brookfield 1% 30rpm, 25 dry base)
1500 min.
Degree of Substitution 0.90 min.
Particle size,% (pass 80 mesh) 95.0 min.
pH 6.5 - 8.5
Moisture,% 10 max.
JEOGES PRODUCT CATALOUGE 2012
6. MUD PUMPS
Diesel Engine Mud Pump
PRODUCT Z108 PANCAR ENGINE
Number of Cylinder N. 2
Cylinder Bore / Stroke mm 108x110
Displacement cm³ 2014
Compression Ratio - 17
Max. Torque Nm / Rpm 112 / 1700
Lowest Idle Speed Rpm 850
Fuel Tank Capacity Lt 20
Oil Sump Capacity Lt 6
Dry Weight Kg 300
PerformanceTable DIN 70020 NF Vehicle Power
Rpm kw HP
3000 28.5 38.7
2600 26.9 36.6
2300 25.3 34.4
2000 23.0 31.3
1800 21.0 28.6
1500 17.5 23.8
Dimension (a x b x h) cm 50 x 55 x 74
PRODUCT W11 PISTON PUMP
Configuration Triplex Piston
Number of Pistons 3
Stroke Length 2.75 Inches
Frame Load Rating 6,000 lbs
Pump Weight (Average) 425 lbs
Direction of Rotation Top of shaft away from head
Internal Gear Ratio 3.6:1
Intermittent Duty Speed Rating 900 RPM
Continuous Duty Speed Rating 750 RPM
Ball Valve Max Speed Rating 635 RPM
Minimum Speed * 360 RPM
Mechanical Efficiency 85%
Lubrication System (Standard Splash, Gravity Return
Lube Oil Capacity 1 Gallon
Lube Oil Type SAE 30
Maximum Fluid Temperature 140 °F (250 °F Capability)
Minimum Fluid Temperature 0°F (-20 °F Capability)
Standard Suction Size 2.00 Inch NPT
Standard Discharge Size 1.25 Inch NPT
Fluid End Material Cast Iron
Valve Types Disc Valves, Ball Valves
Hydraulic Motor Mount SAE C - 2 Bolt with 1.25” -14T
SAE C - 4 Bolt with 1.25”- 14T
* Slower RPM can be achieved with the addition of a pressurized lubrication system
JEOGES PRODUCT CATALOUGE 2012
6. DIGITAL SURVEY AND
Drill Rig Remote Monitoring System
RIG REMOTE MONITORING SYSTEM (RRMS) - UZAKTAN
MAKİNA İZLEME SİSTEMİ is an electronic system which is
developed by Jeoges Makina Ve Sondaj Ekipmanları San. ve Tic. LTD
ŞTİ and Mikrodizayn Elektronik San.ve Tic. LTD ŞTİ, a company which is
active in remote monitoring system, tracking, telemetry and Scada
systems, and is also designing ve producing local electronical devices
since 2007. RRMS is tested thoroughly in the field and can be adjusted
for all kinds of drilling machines
It is a well known fact that, with regards to machine fuels, chemical oils
and other drilling equipmenti, time spent on other than the drilling and
sample gathering processes is not tracked adequately; and this causes
loss in profits. In order to minimize the time and expenditure costs and
also to track all these instantly, a real-time GPRS tracking line is going to
be established fort he drilling equipment located in the field. The dta
from the pas is going to be stored and detailed reports shall be
established.
SYSTEM SPECIFICATIONS
1. RIG REMOTE MONITORING SYSTEM (RRMS) is composed of various
sensors, server and tracking software.
2. with the GPS feature, the coordinates of the machines are tracked and
located on the map.
3. GPRS device is connected to the tracking software and sends the data
about the drilling equipments to the database with a specified
communication period (between 10 minutes and 24 hours).
4. With the WEB access service, it is possible to monitor all the data with
a cellphone or a personal computer, without the need to be present in
the office.
5. The system minimizes the risk of oil leakages, wrong equipment or
machine usage, personal mistakes and misprison.
6. As the daily, monthly and annual statistical consumption data is
stored, it is possible to determine the loss, leakage and annual
estimates.
The data which can be monitored by the system are as follows:
Fuel Level Main Pump Pressure
Rotation Pressure Main Pump Discharge
Askı Basıncı Baskı Basıncı
Water Pressure Rotation Discharge
Water Pump Discharge Hydrolic Oil Pressure
Motor Temperature Hydrolic Oil Temperature
Motor Oil Pressure Engine Speed
In addition to these values, other desired factors, that you may state to us, can also be monitored. OPTIONAL SELECTIONS
PRODUCT DECRİPTİON
EXPLANATIONS
Pressure sensor 0-400 bar
The sensor which measures the hydrolic pressure. It transmits the data taken from the clock on the panel. There is a different sensor used for every gauge
Pressure sensor 0-100 bar
The sensor which measures the water pressure. It transmits the data taken from the clock on the panel. There is a different sensor used for every gauge.
Discharge sensor (300 lt/dk)
It reads the hydrolic oil in liters/minute that runs through unit diameter and send the data to the monitoring center for the systems that has an oil transition up to 300 bars. There is a seperate discharge sensor used for every oil line.
Discharge sensor (100 lt/dk)
It reads the hydrolic oil in liters/minute that runs through unit diameter and send the data to the monitoring center for the systems that has an oil transition up to 100 bars. There is a seperate discharge sensor used for every oil line.
Motor Rotation sensor
It is the sensor that measures the motor rotation speed in RPM and transmits the data to the monitoring center. Normal values are identified; warning messages are transmitted whenever abnormal values occur.
Hyrodlic Oil Temperature Sensor (-50˚_+130˚)
It is placed inside the hydrolic tank. It measures the oil temperature and transmits is to the monitoring center. warning messages are transmitted whenever abnormal values occur
Motor Temperature Sensor
It reads the motor temperature and transmits is to the monitoring center as numerical or as a warning message. Warning messages are transmitted whenever abnormal values occur.
Motor Oil Pressure Sensor
It reads the motor oil pressure and transfers numeric or warning message to the monitoring center. Normal values for oil pressure are identified; when anormlies ocur, warning message is received
GPS Module Provides the monitoring of the coordinates and the locations of the machines on Google Earth
GSM
/
GPRS
JEOGES PRODUCT CATALOUGE 2012
JEOGES MAKINA VE SONDAJ EKIPMANLARI SAN TIC LTD STI Adres : Saglik-1 Sokak No: 10 / 2 Sihhiye
Ankara TURKIYE Tel : + (90) 312 4331510
Fax : + (90) 312 4331511 Email : mailto:jeoges@jeoges.com.tr
top related