hro 3.5 series reverse osmosis systems...engineered water treatment solutions hro 3.5 series reverse...
Post on 29-Mar-2020
4 Views
Preview:
TRANSCRIPT
Engineered Water Treatment Solutions
HRO 3.5 Series Reverse Osmosis Systems
HRO 3.5-300Wall Mount
Reverse Osmosis System
HRO 3.5-300Reverse Osmosis Systemwith Optional 20” Standand 20” Filter Housings
HRO 3.5-Series Reverse Osmosis Systems are manufactured for light commercial applications and feature a compact wall mount space-saving design. The HRO 3.5-Series come pre-assembled and ready for immediate on-line service with minimal set up and simple utility connections.
HRO 3.5-Series Reverse Osmosis Systems have been engineered for capacities of 200 and 300 gallons per day and feature a single pump design for enhanced performance.
Features5 Micron Sediment Pre-Filter10 Micron Carbon Block Pre-Filter and Post-FilterPentek® 10” Filter HousingsHF4 Extra Low Energy MembraneFiberglass Membrane Housing0 – 300 psi Glycerin-Filled Pump Pressure Gauge0 – 100 psi Glycerin-Filled Pre-Filter Pressure Gauge0 – 100 psi Glycerin-Filled Permeate Pressure GaugeJohn Guest® Push/Pull Fittings with Locking Safety ClipsAquatec® High Flow Booster PumpAquatec® Tank Pressure SwitchAquatec® Feed Solenoid ValveAquatec® Auto Flush Timer Valve
Options and Upgrades10” and 20“ Floor StandsProduct Water Storage TanksHF5 Ultra Low Energy Membrane (For Cold Water Applications)Stainless Steel Membrane HousingHM Digital® DM-2 TDS MeterPentek® 20” Filter Housings
HRO 3.5-300
HRO 3.5-200
Single PassTDS <1000
40%
98.5%0.14 / 0.530.21 / 0.79
3/8 Tube3/8 Tube3/8 Tube
11
2514
11
Aquatec 8800
110V, 60Hz, 1Ph, 1.0A220V, 50Hz, 1Ph, 0.5A
9 x 20 x 19 / 22.9 x 50.8 x 48.342 / 19.1
HRO 3.5-300
Single PassTDS <1000
50%
98.5%0.21 / 0.790.21 / 0.79
3/8 Tube3/8 Tube3/8 Tube
11
2521
11
Aquatec 5800
110V, 60Hz, 1Ph 1.0A220V, 50Hz, 1Ph, 0.5A
9 x 27 x 19 / 22.9 x 68.6 x 48.350 / 22.7
*
77°F 185°F 040°F 1,000
120°F 140°F 1185 345 12
120 2<3
Operating Limits
Product flow and recovery rates are based on feedwater conditions of 550 TDS at 77°F at 100 psi. Treatment ability of the RO system is dependent on feedwater quality. Higher TDS and/or lower temperatures will reduce product flow. Performance projections should be run for each installation.
DesignConfigurationFeed Water Source (ppm)Standard Recovery*Rejection and Flow RatesNominal Salt RejectionPermeate Flow* (gpm / lpm)Concentrate Flow (gpm / lpm)ConnectionsFeed (in)Permeate (in)Concentrate (in)MembranesMembrane Per VesselMembrane QuantityMembrane SizeVesselsVessel ArrayVessel QuantityPumpsPump TypeElectricalStandard VoltageVoltage OptionsSystem DimensionsL x W x H (in / cm)Weight (lb / kg)
HRO 3.5 Series Reverse Osmosis Systems
PRODUCT SPECIFICATIONS
Max. Turbidity NTU ^Max. Free Chlorine ppmMax. TDS ppmMax. Hardness GPG ^^Max. pH (Continous)Min. pH (Continuous)Max. pH (Cleaning 30 Min.)Min. pH (Cleaning 30 Min.)
Design TemperatureMax. Feed TemperatureMin. Feed TemperatureMax. Ambient TemperatureMin. Ambient TemperatureMax. Feed Pressure psiMin. Feed Pressure psiMax. Operating Pressure psiMax. SDI Rating
Test Parameters: Static pressure tested.^Appropriate filtration must be installed in order to prevent premature membrane fouling.^^Scale prevention measures must be taken to prolong membrane life.
Hellenbrand, Inc.404 Moravian Valley Road Waunakee, WI 53597 www.hellenbrand.com
Hellenbrand products are not for sale or distribution into the State of California effective 8/31/18.
top related