heavy duty plough with successful track...
Post on 20-Mar-2018
213 Views
Preview:
TRANSCRIPT
Available for delivery is a second-user SMD designed and manufactured heavy duty plough. This 500m rated plough with 80Te bollard pull comes complete with surface control system, umbilical winch, cable and spares.
The plough is based upon the successful and proven MD-3 plough and utilises the most recent trenching technology in the market place.
The asset is in good working condition and available with the control system, umbilical winch and cable in excellent condition. Unlike other second-hand user systems, the asset will come with SMD’s original equipment manufacturers warranty and will be supplied after a full workshop test programme. A full spares package will be included as standard.
The equipment is available Ex-Works, Newcastle upon Tyne, UK (Incoterms® 2010) on flexible terms with operational and maintenance staff, if required.
HEAVY DUTY PLOUGH WITH SUCCESSFUL TRACK RECORD
DO YOU WANT TO STRENGTHEN YOUR TRENCHING FLEET...?
• For use with telecoms cables and small power cables
• Cost-effective way to broaden burial capability
MOVING IN TO OFFSHORE WIND?
• Low-cost entry to market
• Utilise experience by acquiring focussed market asset
80Te bollard pull Diverless unloading
Optional repeater handlingTrue zero to 3m trench depth
A 500m rated plough with 80te bollard pull, surface control system and umbilical winch and cable. It can handle a range of flexible products up to 200mm diameter with a 3.0m MBR.The plough is available in it’s original configuration with options available to repurpose the equipment for protection of either submarine telecommunication cables or small power cables or umbilicals.
General
Depth rating 500msw
Dimensions L x W x H 9.1 x 5.1 x 4.4m
Weight in air (approx.) 38Te
Max bollard pull 150Te
For more information please contact:
JEFF TAYLOR: SALES MANAGER Email: jeff.taylor@smd.co.uk Tel: +44 (0)191 234 2222
Subsea Instrumentation
Heading Gyro
Altitude Echosounder
Trench and product sensing 20-200mm
Pitch and roll Inclinometer
Load Shear pin loaded cell
Displacement In-cylinder transducer
Distance Rotary encoder
Pressure transducers Hydraulic system pressure Water jet pressure
Hydrophone Benthos
Umbilical winch (0-500m depth) 5Te pull / 4Te render
Performance
Trench depth Variable 0-3m
Cable diameter range 30-200mm
Cable min bend radius (MBR) 3m
Jetting
Plough share and knife tip jetting
Pump 1 x 265kW
Flow rate 800m3/hr
Pressure 6 bar
Hydraulic System
Installed power 15kW
Cylinders Smart heavy duty marine
Valves Directional/counterbalance
Valve packs Stainless steel Oil compensated
Manifolds, pipes and fittings Stainless steel
Hoses Multi-spiral flexible
Diverless Subsea Loading and Unloading Options/Upgrades
Crane Up to 14.5 Tem (tonne metres) knuckle boom
(UPGRADE)
Slewing depressor To assist cable in to share(UPGRADE)
Front bellmouth tines Load cable in to front bellmouth
Jetting thruster To assist landing over
Tipping trough To assist cable unloading
ROV intervention panel Provide emergency ejection
CAPABILITIES•80Te bollard pull •True 0 to 3m max trench depth capability with 3.0 MBR cable path•Jetting system for enhanched burial in sands up to 256kW
•Cable and flexible joint burial up to 200mm diameter, 3.0MBR•Currently setup for diverless unloading and emergency ops recovery•Optional diverless subsea loading
•Optional repeater handling
top related