health & safety ring remover antiquax ring remover … · such as lacquers, varnishes and...

Antiquax Ring Remover removes water and heatmark damage from a range of polished surfaces

such as lacquers, varnishes and French Polish. RingRemover will also restore the gloss and remove

minor defects from finishes.

DIRECTIONS FOR USE Shake well before use.

Pour the Ring Remover onto a lint free cloth and rub with pressure over the mark in the direction of the grain until the mark is removed. If the mark does not disappear

apply more Ring Remover and repeat. Buff with Antiquax Polishing Cloth and then wax if required.

For deeper marks the Ring Remover can be applied with Fine Steel Wool (grade0000). For satin or matt finishes the same grade of steel wool may be used to matt thesurface down after the Ring Remover has been used

as it may produce a shiny surface.Test the product on an inconspicuous area to ensure that

it is compatible with the surface.

Ring RemoverRing RemoverHEALTH & SAFETYContains gum turpentine. May produce an allergicreaction. Keep out of reach of children. Do not get in eyes, on skin, or on clothing. IF SWALLOWED: Call a POISON CENTRE or doctor if youfeel unwell. IF ON SKIN: Wash with plenty of soap and water. IF IN EYES: Rinse cautiously with water for severalminutes. Remove contact lenses, if present and easy todo. Continue rinsing. Wear protective gloves/protective clothing/eyeprotection/face protection. If skin irritation occurs: Get medicaladvice/attention. Made in UK

RingRemover

RingRemover

20160826_LAB_0221646 Antiquax_Ring Remover_200ml_label_Layout 1 26/08/2016 12:13 Page 1