for excavators e-mail: sales@ghedini.com t: ...€¦ · ghedini ing. fabio & c. snc – via...

Internet: www.ghedini.it

e-mail: sales@ghedini.com

tel. +39 0532 857373

fax +39 0532 857873

HHyyddrraauulliicc bbuusshh ccuutttteerrss

DDKK sseerriieess

ffoorr eexxccaavvaattoorrss

ffrroomm 77 ttoo 2200 ttoonnss

GHEDINI ing. FABIO

Catalogue nr.99810

Ghedini ing. Fabio & C. snc – Via Canne, 47 – I 44048 S. M. Codifiume (Ferrara) Italy

tel. +39 0532 857373 – fax. +39 0532 587373 – e-mail: sales@ghedini.com

The hydraulic bush cutters DK series have been engineered to be used on excavators with a maximum operational weight ranging from around 7 t to 20 t. Three models with an operational width of 130, 160 and 190 cm are available. The brackets are interchangeable.

The bidirectionality of the rotor and the absence of the support roller let it work in both directions. Both entries of the hydraulic engine should be connected to an hydraulic power plug like a “double acting”. In the meantime the ¼ G drain tube should be directly connected to the tank.

Technical specifications table of the bush cutter DK series

Model

Minimum oil

flow rate

required

Max.

pressure

Operational

width

L

Weight

Weight of the excavator

[L/min] [bar] [mm] [kg] [tons]

DK 13 75 250 1.300 500 7 – 11

DK 16 90 250 1.600 600 10 – 15

DK 19 100 250 1.900 700 14 – 20

The hydraulic bush cutter DK series is equipped with a couple of “Y” shaped blades and a third one located in the middle, which allows it to reduce all the treated material to fine grains.