fire trailer please note the hose reel is designed to pull...

Fire trailer

The trailer requires a 2 inch ball so please know where yours is. Also the trailer is heavy so you might back up to or

measure the height of the trailer tongue and compare it to your hitch/ball height before you need it.

Please note the hose reel is designed to pull straight off the back so when pulling up to the needed area aim your

truck away from the target area so the back of the trailer is pointed at target area.

Please note all pictures are showing the position of the switches/valves in the operating position.

1) Turn the red valve located off the rear of the tank.

2)

3) Turn the fuel on(lower black lever) and the choke on(grey upper lever)

4)

5) Turn on the ignition.

6)

7) Pull the start cord.

8) Adjust the choke.

9) Pull hose to desired location.

10) The Red nozzle can be twisted and adjust from off to fan to pin stream.

11) Please watch your water consumption so you know when you are about out.

Fires are dangerous, Please be aware of what you are doing and those around you.