epoxy & urethane floor maintenance

EPOXY & URETHANE FLOOR MAINTENANCE

Dust Mop Daily

(It’s important to remove abrasives that can scratch and degrade the conductivity by dry mopping).

Typical Floor Maintenance (urethane top coated systems)

Once a week,

wet mop the floor with a diluted mixture of alkaline (non-residue) floor cleaner and water and allow to dry.

Auto Scrub every 2 weeks,

or as needed (with a diluted mixture of alkaline non-residue floor cleaner) to remove ground in dirt and contaminants.

Use soft nylon bristle pads (or red buffer pads).

With EP floor’s

Maintain the highest aesthetics possible in epoxy topcoated floors, it may be waxed, using the procedures below:

Additional option – waxing (epoxy topcoat systems)

STEP ONE:

Remove old wax and ground in dirt, using floor stripping liquid.

STEP TWO:

Wax the Floor

STEP THREE: Routine maintenance

Once a week, wet mop the floor with a diluted mixture of floor cleaner and water and allow to dry. Power scrubbing equipment

STEP FOUR: Mirror Like Shine.

Buff dry using a spray-buff pad on your floor polishing machine.

From EP Floors Corp.

Clients receive years worth of service from the initial installation (and routine maintenance)

RESTORATION

www.epfloors.com

Join EP Floors Corp

THANK YOU

Engineering