die and mold - rochatools.com.br moldes e matrizes.pdf · mold – electrical industry plastic mold...
Post on 18-Aug-2018
246 Views
Preview:
TRANSCRIPT
Proven Solutions
Die and Mold
KENNAMETAL HEADQUARTERSEuropeKENNAMETAL GmbH & Co. KGWerkzeuge + HartstoffePostfach/P.O. Box 1751D-90707 FürthE-Mail: fuerth.information@kennametal.comPhone: + 49 / 911/ 9735-0Fax: + 49 / 911/ 9735-388
Asia PacificKennametal Singapore Pte. LtdNo. 11 Gul LinkJurongSingapore 629381E-Mail: sales@kennametal.com.sgPhone: + 65 / 6 / 2659222Fax: + 65 / 6 / 8610922
World HQKennametal Inc.P.O. Box 231Latrobe, PA-USA 15650-02311600 Technology WayLatrobe, PA-USA 15650E-Mail: info@kennametal.comPhone: + 01/ 724 /539-5000Fax: + 01/ 724 / 539-4942
Subsidiaries / Sales Offices
For other countries, please refer to our website www.kennametal.comor contact International Sales & Service
TURKEYKennametal Kesici Takımlar Sanayi ve Ticaret A.Ω.Hal Yolu, Sayar iµ Merkezi No: 11/581120 Içerenköy – IstanbulE-Mail: info.tr@kennametal.comPhone + 90 / 216 / 574 47 80Fax + 90 / 216 / 574 05 64
UNITED KINGDOM Kennametal UK limited PO Box 29The Pensnett EstateKingswinfordWest Midlands DY6 7NPE-Mail: kingswinford.service@kennametal.com Phone + 44 /13 84 / 4010 00Fax + 44 /13 84 / 40 8015
KENNAMETAL GmbH & Co. KGWerkzeuge + Hartstoffe Postfach/P.O. Box 175190707 Fürth E-Mail: fuerth.sales@kennametal.comPhone + 49 / 911 / 97 35-214Fax + 49 / 911 / 97 35-606
International Sales & Service
ITALYKennametal Italia S.p.A. Via Morivione, 520141 Milano E-Mail: milano.vendite@kennametal.comPhone + 39 / 02 / 89 59 61Fax + 39 / 02 / 89 50 06 72
NETHERLANDSKennametal Nederland B.V.Postbus 1596800 AD ArnhemE-Mail: arnhem.information@kennametal.comPhone + 31 / 26 / 3 69 96 11Fax + 31 / 26 / 3 6153 09
POLANDKennametal Polska, Sp. z o.o.ul. Teatralna 941-200 SosnowiecE-Mail : sosnowiec.sales@kennametal.comPhone + 48 / 32 / 2 96 30 63Fax + 48 / 32 / 2 93 44 53
PORTUGALKENCI, Lda. Rua do NegralCampo4440-115-Valongo (Portugal)E-Mail: portugal@kenci.comPhone + 351/ 22 4119 400Fax + 351/ 22 4119 405
SLOVAKIAKennametal, GmbH & Co. KGSales OfficeBratislavská 439/18018 41 Dubnica nad VáhomE-Mail : dubnica.sales@kennametal.comPhone + 421/ 4 24 42 85 22Fax + 421/ 4 24 44 07 91
SPAINKENCI S.A. Poligono Ind. Rubi SurAvda. Antonio Gaudi, s/n08191 Rubi (Barcelona)E-Mail: kenci@kenci.com Phone + 34 / 93 / 5 86 03 50Fax + 34 / 93 / 6 97 46 00
AUSTRIAKennametal Österreich GmbHA 2345 Brunn am GebirgeCampus 21 Businesspark Wien Süd,Europaring F12 301E-Mail: brunn.sales@kennametal.comPhone + 43 /22 36 / 37 98 98 Fax + 43 /22 36 / 37 98 98-40
BELGIUM/LUXEMBOURGKennametal Belgium S.A. Parc Industriel des Hauts-SartsRue de Hermee 177A 4040 HerstalE-Mail: liege.sales@kennametal.comPhone + 32 / 4 / 248 48 48Fax + 32 / 4 / 248 28 14
CZECH REPUBLIC Kennametal GmbH & Co. KGSales OfficeNad Olsinami 12100 00 PRAHA 10E-Mail: praha.sales@kennametal.comPhone + 42 / 02 / 74 82 21 51Fax + 42 / 02 / 74 82 22 96
FRANCE Kennametal France S.A.S.B.P. 20191007 Evry CedexE-Mail: info.fr@kennametal.comPhone + 33 /1/ 69 77 83 83Fax + 33 /1/ 69 77 83 90
GERMANYKennametal Deutschland GmbH Postfach/P.O. Box 1347 61364 Friedrichsdorf E-Mail:friedrichsdorf.salesoffice@kennametal.com Phone + 49 / 61 72 / 737-0 Fax + 49 / 61 72 / 784 90
HUNGARYKennametal Hungaria KftH-9021 Györ Szent István út 10/AE-Mail: office@kennametal.gyor.huPHONE + 36 / 96 / 618 158Fax + 36 / 96 / 618 152
ENGINEERING YOUR COMPETITIVE EDGE
ENGINEERING YOUR COMPETITIVE EDGE
DM.04GB
Mo
ld –
Ele
ctr
ica
l in
du
str
y
Mo
ld –
To
y i
nd
ustr
y a
nd
Ge
ne
ral
En
gin
ee
rin
g
Mo
ld –
Au
tom
oti
ve
Die
– A
uto
mo
tive
an
d G
en
era
l E
ng
ine
eri
ng
To
ol
ove
rvie
w
Die
– A
uto
mo
tive
To
ol
ove
rvie
w
Se
rvic
e
Why not put us to the test…
Our customers define the tasks and goals – specialists
from the Advanced Engineering division analyse the existing
production processes and plan new methods to meet
even the most challenging of customer requirements.
Using, of course, the latest technologies for our cutting
materials and tooling systems. And you too can use
the Kennametal Group's expertise in the field of
complete machining.
One particular challenge is the complete machining
of workpieces with defined cutting edges. More
so than ever, Kennametal is the ideal partner for
providing solutions to a wide variety of
tasks in this field.
Committed to your requirements
Expertise and excellence: your complete supplier
for tooling solutions
... ENGINEERING YOUR COMPETITIVE EDGEWith a comprehensive range of products, conveniently
located to serve customers, excellent service and with
the successful merger of Kennametal Hertel and Widia.
Kennametal is consolidating its leading position as the
complete supplier for high quality, tailor-made tooling
solutions – to give you the competitive edge!
Tried and trusted partner for optimised production
The Kennametal Group has many years' experience
and expertise on an international level, highly developed
engineering skills and a global sales network. Both now
and in the future, we will be able to bring innovative,
high-performance products to market even more quickly
thanks to our research and development excellence.
Certification to ISO 9001, QS 9000 TES and VDA 6.4
guarantees the highest possible quality standards.
Mo
ld –
Ele
ctr
ica
l in
du
str
y
Plastic mold
ENGINEERING YOUR COMPETITIVE EDGE
F2AL, Solid carbide ball nose end milldiameter 10 mm, KC637MBT40 shrinkfit adaptorroughing
KMM– modular screw-on mill
diameter 25 mmRDHX1003.., KC510M
BT40 screw-on adaptorpre-roughing
F2AL, Solid carbide ball nose end mill
diameter 4 mm, KC637MBT40 shrinkfit adaptor
finishing + rest material
F2AL, Solid carbide ball nose end mill
diameter 6 mm, KC637MBT40 shrinkfit adaptor
pre-finishing + rest material
F2AL, Solid carbide ball nose end mill
diameter 2 mm, KC637MBT40 shrinkfit adaptorfinishing, fine finishing
Material/hardness:1.2379, 54HRC
Mo
ld –
To
y i
nd
ustr
y a
nd
Ge
ne
ral
En
gin
ee
rin
g
ENGINEERING YOUR COMPETITIVE EDGE
Plastic mold
KSWM, KenFEED Screw-on headdiameter 42 mm, 42Y03R045M16SWP08,WPMT080615ZSRHN KC522Mpre-roughing, ap = 1 mmvf = 7600 mm/min, n = 1150 min-1
KMM RD07, Screw-on headdiameter 15 mm, 15E02R023M08SRD07
RDHX07T1M0SLN KC522M finishing, ap = 0,5 mm,
vf = 2750 mm/min, n = 3820 min-1
Material/hardness:1.2738, 50HRC, Machining time: 75 min
3-Dimensional contour
ENGINEERING YOUR COMPETITIVE EDGE
KTC, End milldiameter 16 mm, KC515MHSK63A shrinkfit adaptorroughing, ap= 0,5 mm, ae = 8 mmvc = 350 m/min, fz = 0,2 mm
F2AL, Solid carbide ball nose end milldiameter 12 mm, KC637MHSK63A shrinkfit adaptorpre-finishing, ap = 0,1 - 0,3 mm, ae = 0,1 - 0,3 mm, fz = 0,05 - 0,15 mm,n = 8000 min-1
F2AL, Solid carbide ball nose end mill
diameter 2 mm, KC637MHSK63A shrinkfit adaptor
finishing + engraving, ap = 0,05 mm,ae = 0,05 mm, fz = 0,04 mm,
n = 28000 min-1
F2AL, Solid carbide ball nose end mill
diameter 4 mm, KC637MHSK63A shrinkfit adaptor
rest material ap = 0,1 - 0,3 mm, ae = 0,1 - 0,3 mmfz = 0,05 - 0,15 mm, n = 24000 min-1
KMM RD12.. Screw-on headdiameter 24 mm, 24E02R035M12SRD12;RDHX12T3M0SGN KC522M roughing, ap = 1 mmvf = 2200 - 3000 mm/min, n = 2400 min-1
F4AT, Solid carbide button headdiameter 10 mm, F4AT1000ABT30R030
KC637M, finishing,rest material, ap = 0,3 mm
vf = 2900 - 3300 mm/min, n = 5750 - 7650 min-1
Mo
ld –
Au
tom
oti
ve
ENGINEERING YOUR COMPETITIVE EDGE
Mold for aluminium casting
F2AL, Solid carbide ball nose end mill
diameter 4 mm, KC637M HSK63A shrinkfit adaptor
finishingap= 0,05 - 0,3 mm, ae = 0,05 mm
vf = 2000 - 2200 mm/min, n = 25000 min-1
M 680 Milling cutterdiameter 40 mm,
XDHT09.., TN7525HSK63A shell mill adaptor
roughing, ap = 0,5 mm, ae = 8 mm, vc = 180 m/min,
vf = 1000 mm/min
F2AL, Solid carbide ball nose end milldiameter 12 mm, KC637MHSK63A shrinkfit adaptorroughing/finishingap = 0,1 - 0,3 mm, ae = 0,1 - 0,3 mm vf = 2200 mm/min, n = 8800 min-1
F2AL, Solid carbide ball nose end mill diameter 3 mm, KC637M HSK63A shrinkfit adaptorfinishing, rest materialap = 0,05 - 0,3 mm, ae = 0,05 mm vf = 2300 - 2500 mm/min, n = 28000 min-1
F2AL, Solid carbide ball nose end milldiameter 6 mm, KC637M HSK63A shrinkfit adaptorpre-finishing – finishingap = 0,05 - 0,3 mm, ae = 0,05 mm vf = 2300 - 2500 mm/min, n = 15000 min-1
F2AL, Solid carbide ball nose end mill
diameter 8 mm, KC637M HSK63A shrinkfit adaptor
roughing/finishingap= 0,1 - 0,3 mm, ae = 0,1 - 0,3 mm vf = 2200 mm/min, n = 10500 min-1
Material:42CrMo4, temperedMachining time: 4h30min
Die
– A
uto
mo
tive
Forging die
ENGINEERING YOUR COMPETITIVE EDGE
F2AL, Solid carbide ballnose end milldiameter 2 mm, KC637MHSK63A shrinkfit adaptorpre-finishingap = ae = 0,2 mm vc = 90 m/min, fz = 0,04 mm
F2AL, Solid carbide ball nose end mill
diameter 4 mm, KC637M HSK63A shrinkfit adaptor
pre-finishingap = ae = 0,2 mm, vc = 120 m/min,
fz = 0,055 mm (four axes)
F6AV, Solid carbide end milldiameter 8 mm, KC637MHSK63A shrinkfit adaptorroughingap = ae = 0,2 mm, vc = 80 m/min, fz = 0,04 mm, (three axes)
F6AV, Solid carbide end milldiameter 10 mm, KC637MHSK63A shrinkfit adaptor
pre-roughingap = 3,0 mm, ae = 0,2 mm
vc = 80 m/min, fz = 0,05 mm
F2AL, Solid carbide ball nose end mill
diameter 1,5 mm, KC637M HSK63A shrinkfit adaptor
profile finishingap = ae = 0,07 mm, vc = 113 m/min,
fz = 0,05 mm, (four axes)
Material:1.3551 hardened to 62HRCMachining time: 136 min
Die
– A
uto
mo
tive
an
d G
en
era
l E
ng
ine
eri
ng
Forming punch
ENGINEERING YOUR COMPETITIVE EDGE
Forging die
ENGINEERING YOUR COMPETITIVE EDGE
F2AL, Solid carbide ball nose end mill
diameter 3 mm, KC637M finishing
vc = 140 m/min, fz = 0,02 mm
F4AL, Solid carbide ballnose end milldiameter 6 mm, KC637Mpre-finishingap = ae = 0,2 mm vc = 70 m/min, fz = 0,02 mm
F2AT, Solid carbide radiused end milldiameter 12 mm, r = 3 mm, KC637Mroughingvc = 70 m/min, fz = 0,02 - 0,2 mm
Tool holder PCLNPCLN2525M12, CNMG120408MP,KC9215, facing
KTC, End millwith carbide shank
KTC16BD, diameter 16 mm; r = 3 mm; KC515M
HSK63A shrinkfit adaptorroughing
Boring bar – SCLP95,carbide shankE20S-SCLPL09,CPMT09T304LF, KT315,fine boring
KTC, End millwith carbide shank
KTC16GN, diameter 16 mm; r = 1,3 mm; KC515M
HSK63A shrinkfit adaptorroughing
F2AL, Solid carbide ball nose end mill
diameter 2 mm, KC637M finishing + rest material
vc = 140 m/min, fz = 0,02 mm
Drill-Fix DFTdiameter 35 mm,DFT350R4WD40MDFT06T308MD, KC7215
Material: 1.2379, 62HRC, Machining time: 315 min
To
ol
ove
rvie
w
ENGINEERING YOUR COMPETITIVE EDGE
Demonstration Component
Top Cut Plus Insert drill diameter 24 mm HSK63A Whistle Notch adaptor1 222 00 331 85, TPC35vc = 300 m/min, f = 0,2 mm
M 680 Face milldiameter 63 mm, z = 6
HSK63A shell mill adaptorSNKT1205AZR-21, TN7525ap = 3,5 mm, ae = 25 mm
vc = 250 m/min, fz = 0,5 mm
KenTIP Drilling tooldiameter 15 mm
HSK63A hydraulic chuckvc = 120 m/min, f = 0,2 mm
M 680 Plus Shoulder milldiameter 50 mm, z = 5HSK63A shell mill adaptorAONT10T308-ML, TN450ap = 9,9 mm, ae = 5 mmvc = 400 m/min, fz = 0,12 - 0,2 mm
KSWM – KenFEED diameter 35 mm, z = 2HSK63A screw-on adaptorWPMT080615ZSRHN, KC522Map = 0,7 mm, ae = 42 mm, depth 9,9 mmvc = 250 m/min, fz = 1 mm
M 100 Face milldiameter 24 mm, z = 2
HSK63A screw-on adaptorRDMT1204MOT-X, TN450
vc = 300 m/min, fz = 0,2 mm
➊
➊➋
➋
➋
➋
➌
➌
➍
➍
➎
➎
➏
➏
➏
To
ol
ove
rvie
w
ENGINEERING YOUR COMPETITIVE EDGE
Demonstration Component
KMM-XD06 diameter 24 mm, z = 3HSK63A screw-on adaptorXDHX060210EGC, KC522M ap = 1,5 mm, ae = 10 mmvc = 300 m/min, fz = 0,12 mm
M 100 Face milldiameter 50 mm, z = 4
HSK63A shell mill adaptorRDMT1204MOT-X, TN450
ap = 2 mm, ae = 20 - 40 mm vc = 280 m/min, fz = 0,3 mm
M 100 Face milldiameter 66 mm, z = 5
HSK63A shell mill adaptorRCMT1606MOT-X, TN450
ap = 7 mm, ae = 25 mmvc = 250 m/min, fz = 0,3 mm
KSHM Face milldiameter 63 mm, z = 6
HSK63A shell mill adaptorHPGT06T3DZERLD, TN7525
ap = 0,3 mm, ae = 50 mmvc = 450 m/min, fz = 0,12 mm
KSWM KenFEED diameter 66 mm, z = 4HSK63A shell mill adaptorWPMT08615ZSRHN, KC522Map = 0,7 mm, ae = 50 mmvc = 400 m/min, fz = 2 mm
➊
➊ ➋
➋
➌
➌
➍
➍
➎
➎
Service and tool management:
more than just tools
Solutions – and much moreFrom the tender phase right through to commissioning,
the Kennametal team is with the customer every step
of the way. As a result, planning and implementation time,
and thereby also preliminary costs are reduced considerably.
Our outstanding solutions for highly-specialised applications
are trusted by a wide range of customers.
But we can do much much more…
We are always flexible!
Our tooling solutions and service options are
geared towards the individual requirements
of your production and management processes.
Our high-performing project and engineering team
is ready and willing to take up the challenge posed
by your tasks.
ENGINEERING YOUR COMPETITIVE EDGE
With Kennametal you are engaging a partner for all cutting tools
who'll take technical and commercial responsibility for logistics,
operation and inspection of your entire tooling operations
and related sub-processes.
The expert all-round service guarantees continuous process
optimisation, defined annual cost reductions, the latest
technology through ”best-in-class“ tools, on-time delivery and
reliable availability, smooth-running production operations
and optimum process control as well as a calculable increase
in productivity and profitability. In short: your competitive edge
in the market.
Engineered Tooling Services
Your peace-of-mind –service by Kennametal
In our range you will find a host of additional services such as
full design planning, process planning, machining follow-up,
cutting data, case studies, tool plans, cost-effectiveness
studies or CAD documents in various programs.
In addition you can get assistance when needed from our
technical application support.
Our Test & Demo Center gives you the opportunity
to try out products before placing any orders.
Se
rvic
e
top related