designing classroom language tests
Post on 06-May-2015
716 Views
Preview:
DESCRIPTION
TRANSCRIPT
DESIGNING CLASSROOM LANGUAGE TESTS
Lecturer: Yee Bee ChooIPGKTHO
YBC
Determining
Planning
Writing
Preparing
Reviewing
Pre-testing
Validating
Stages of Test Construction
YBC
Stages of Test Construction
1. DeterminingBe clear with the following: The objective of the test (what will it measure?) The need for the test (what advantages will it have?) The test population (who will take it?) The content (what will the test cover?) The style of administration (how will it be given) The item format (will it be forced choice? Multiple
choice?) The inclusion of alternate forms use (is it necessary for
this test?) The training requirements (what professionals are
allowed to give the test?)
YBC
Stages of Test Construction
2. Planning Prepare a table of specifications for the test. This will include information on:
◦ content◦ format and timing ◦ criteria◦ levels of performance◦ scoring procedures
YBC
Stages of Test Construction
3. WritingA good test item writer should: be experienced in test construction. know the subject matter well. know and understand the students being
tested. be thoroughly familiar with test formats have the capacity in using language clearly
and economically. be ready to sacrifice time and energy.
YBC
Stages of Test Construction
4. PreparingFactors in selecting the appropriate format: Purpose of the test Time available to prepare and score the test The number of students to be tested Physical facilities available for reproducing
the test Skill in writing the different types of items
YBC
Stages of Test Construction
5. ReviewingPrinciples for reviewing test items: The test should not be reviewed
immediately after its construction, but after some considerable time.
Other teachers or testers should review it. In a language test, it is preferable if native
speakers are available to review the test.
YBC
Stages of Test Construction
6. Pre-testing The tester should administer the newly-
developed test to a group of examinees similar to the target group and the purpose is to analyse every individual item as well as the whole test.
Numerical data (test results) should be collected to check the efficiency of the item, it should include item facility and discrimination.
YBC
Stages of Test Construction
7. Validating Item difficulty (or easiness)/Item Facility (IF)
– the extent to which an item is easy or difficult for the proposed group of test-takers
Item discrimination (ID) – the extent to which an item differentiates between high- and low-ability test-takers
YBC
Stages of Test Construction
7. Validating To measure the facility or easiness of the item, the following
formula is used:IF= (Σc) / (N)(Σc) - number of correct responses(N) - total number of candidates
The results of such equations range from 0 – 1. An item with a facility index of 0 is too difficult, and with 1 is
too easy. The ideal item is one with the value of (0.5) and the
acceptability range for item facility is between [0.37 → 0.63], i.e. less than 0.37 is difficult, and above 0.63 is easy.
Thus, tests which are too easy or too difficult for a given sample population, often show low reliability.
YBC
Test specs serve as a blueprint of the test in the following:
a description of its content item types (methods, such as multiple-
choice, cloze, etc.) tasks (e.g. written essay, reading a short
passage, etc.) skills to be included how the test will be scored how it will be reported to students
Preparing Test Blueprint/ Test Specification
YBC
According Brown (2005), test specification should include the following:
1. Outline of the test2. Skills to be included3. Item types and tasks
Preparing Test Blueprint/ Test Specification
YBC
1. Outline of the test (example)Section A. Vocabulary
Part 1 (5 items): match words and definitionsPart 2 (5 items): use the words in a sentence
Section B. Grammar(10 sentences): error detection (underline or circle the
error)
Section C. Reading comprehension(2 one-paragraph passages): four short-answer items for
each
Section D. WritingRespond to a two-paragraph article on Malaysian culture
Preparing Test Blueprint/ Test Specification
YBC
2. Skills to be included Sometimes due to time constraint, a 60-minute test
can only assess 3 or 4 language skills, e.g. listening, reading, writing and grammar.
Other skill such as speaking is done separately in another time as more time is needed if the teacher is assessing the students one-by-one.
Preparing Test Blueprint/ Test Specification
YBC
3. Item Types and Tasks There are a limited number of modes of
eliciting responses (i.e. prompting) and of responding on tests of any kind.
Consider: the test prompt can be oral (student listens) or written (student reads) and the student can respond orally or in writing.
Preparing Test Blueprint/ Test Specification
3. Item Types and Tasks (Elicitation mode)
Oral (student listens) Written (student reads)
•word, pair of words•sentence(s), question•directions•monologue, speech•Pre-recorded conversation;•interactive (live) dialogue
•word, set of words•sentence(s), question•directions•paragraph•essay, excerpt•short story, book
Preparing Test Blueprint/ Test Specification
3. Item Types and Tasks (Response mode)Oral Written
•repeat•read aloud•yes / no•short response•describe•role play•monologue (speech)•interactive dialogue
•mark multiple-choice option•fill in the blank•spell a word•define a term (with a phrase)•short answer (2-3 sentences)•essay
Preparing Test Blueprint/ Test Specification
3. Item Types and Tasks (example)Speaking (5 minute per person, previous day)
Format: oral interviewTask: teacher asks questions of students
Listening (10 minutes)Format: teacher makes audiotape in advance, with one other voice on itTask: a. 5 minimal pair items, MCQ
b. 5 interpretation items, MCQ
Reading (10 minutes)Format: cloze test items (10 total) in a story lineTask: fill-in the blanks
Writing (10 minutes)Format: prompt for a topic: why I like/ do not like footballTask: writing a short opinion paragraph
Preparing Test Blueprint/ Test Specification
YBC
Blooms’ Taxonomy (1956) is a systematic way of describing how a learner’s performance develops from simple to complex levels in their affective, psychomotor and cognitive domain of learning.
The original taxonomy provided carefully developed definitions for each of the six major categories in the cognitive domain and it was revised in 2001.
Bloom’s Taxonomy
YBC
Bloom’s Taxonomy
Anderson and Krathwohl
YBC
Bloom’s Taxonomy
YBC
SOLO (Biggs & Collis, 1982), which stands for the Structure of the Observed Learning Outcome, taxonomy is a systematic way of describing how a learner’s performance develops from simple to complex levels in their learning.
There are 5 stages, namely Prestructural, Unistructural, Multistructural, which are in a quantitative phrase and Relational and Extended Abstract, which are in a qualitative phrase.
Students find learning more complex as it advances.
SOLO Taxonomy
YBC
SOLO is a means of classifying learning outcomes in terms of their complexity, enabling teachers to assess students’ work in terms of its quality not of how many bits of this and of that they got right.
At first we pick up only one or few aspects of the task (unistructural), then several aspects but they are unrelated (multistructural), then we learn how to integrate them into a whole (relational), and finally, we are able to generalise that whole to as yet untaught applications (extended abstract).
SOLO Taxonomy
YBC
SOLO Taxonomy
YBC
SOLO Taxonomy
YBC
The SOLO taxonomy maps the complexity of a student’s work by linking it to one of five phases: little or no understanding (Prestructural), through a simple and then more developed grasp of the topic (Unistructural and Multistructural), to the ability to link the ideas and elements of a task together (Relational) and finally (Extended Abstract) to understand the topic for themselves, possibly going beyond the initial scope of the task (Biggs & Collis, 1982; Hattie & Brown, 2004).
In their later research into multimodal learning, Biggs & Collis noted that there was an ‘increase in the structural complexity of their (the students’) responses’ (1991:64).
SOLO Taxonomy
YBC
Aim of the test: measure the objectives prescribed by the blueprint and meet quality
standards. Range of topics to be tested: measure the
test-takers’ ability or proficiency in applying the knowledge and principles on the topics that they have learnt.
Range of skills to be tested: measure higher levels of cognitive processing.
Guidelines for Constructing Test Items
YBC
Test format: follow a consistent design so that the questioning process in itself does not give unnecessary difficulty to answering questions.
Level of difficulty: plan number of questions at a level of difficulty and discrimination to best determine mastery and non-mastery performance states.
Internal and cultural considerations (biasness): refrain from the use of slang, geographic references, historical references or dates (holidays) that may not be understood by an international examinee.
Guidelines for Constructing Test Items
YBC
SPM 1119 English Paper 1 (Time: 1 hour 45 minutes) Section A. Directed Writing (35 marks) Section B. Continuous Writing (50 marks)
Paper 2 (Time: 2 hours 15 minutes) Section A. 15 MCQ questions (15 marks) Section B. Information Transfer (10 marks) Section C. (i) Reading Comprehension (10 marks) (ii) Summary (15 marks) Section D. Literature Component. (i) Poem. 1 poem with 4 short-answer questions (5 marks) (ii) Novel. 1 essay question (15 marks)
Test Format
YBC
Test FormatPMR (Penilaian
Menengah Rendah)
Written Test1. Bahasa Melayu
2. English 3. Mathematics
4. Science 5. Geography
6. History7. Living Skills
8. Islamic Education9. Native Language
PT3 (Pentaksiran Tingkatan 3)
Oral & Written Test
Bahasa MelayuEnglish
Written Test Mathematics
ScienceLiving Skills
Islamic EducationNative LanguageProject (Case
Study Instrument)
GeographyHistory
top related