datasheet hgarap001a - mouser electronics · 2018. 12. 5. · 1.1 overview 概要 alps product no....
Post on 24-Aug-2020
0 Views
Preview:
TRANSCRIPT
Precautions when handling our products
Cautions regarding this document
DSGD.
CHKD.
APPD. DOCUMENT No.SYMB. APPD. CHKD. DSGD. ( 1/19 )
DATASHEET
~ Revision 01 ~
1) For the export of products which are controlled items subject to foreign and domestic export lawsand regulations, you must obtain approval and/or follow the formalities of such laws and regulations.
2) Products must not be used for military and/or antisocial purposes such as terrorism, and shall notbe supplied to any party intending to use the products for such purposes.
3) Unless provided for otherwise, the products have been designed and manufactured forapplication in equipment and devices which are sold to end users in the market, including audio-visual (AV) equipment, electrical home appliances, office machines, information and communicationequipment, and amusement equipment. The products are not intended for use in, and must not beused for, any application for nuclear equipment, driving equipment for aerospace or any otherunauthorized use. With the exception of the abovementioned prohibited applications, please contact an Alps salesrepresentative and/or evaluate the total system regarding applicability for applications involving highlevels of safety and liability such as medical equipment, burglar alarm equipment, disasterprevention equipment and undersea equipment. Please also incorporate fail-safe design, protectionand redundant circuitry, malfunction protection, and/or fire protection into the complete system toensure safety and reliability of the total system.
4) Before using products which were not specifically designed for use in automotive applications,please contact an Alps sales representative.
1) The specifications herein are an overview of the specifications. Obtain official specificationsbefore use.
2) The external appearance, functions and other specifications herein may be discontinued withoutprior notice.
DATASHEETHGARAP001A
ALPS P/N: HGARAP001A
2015-08-21
DATE K.SEJIMO SBD GA-080
Y.SUDA2015-08-21T.NAKAMURA2015-08-21
ALPS ELECTRIC CO.,LTD.
( 2/19 )
List of Contents
1 Product Description 製品説明 31.1 Overview 概要 31.2 Target Appliations ターゲットアプリケーション 3
2 Functional Description 機能説明 42.1 Pin Configuration ピン配置 42.2 Pin Description ピン機能 4
3 Specifications 仕様 53.1 Absolute Maximum Ratings 絶対最大定格 53.2 Operating Conditions 動作条件 53.3 Basic Characteristics 基本特性 63.4 Electric Characteristics 電気特性 6
4 Package Information パッケージ情報 104.1 Appearance 外観 104.2 Package Outline 外形図 104.3 Footprint フットプリント 114.4 Package Marking 捺印 114.5 Structure 構造 12
5 Packing Specifications 梱包仕様 135.1 Packing Information 梱包情報 135.2 Packing Specifications 梱包仕様 14
6 Reliability Test Conditions 信頼性試験条件 166.1 Preconditioning for Reliability Test 信頼性試験の前処理 166.2 Reliability Test Items 信頼性試験項目 16
7 Precautions When Handling Magnetic Sensor 製品お取り扱い時の注意 177.1 Storage Environment 保管環境 177.2 Long-term Storage 長期保管 177.3 ESD 静電気ESD 177.4 External Magnetic Field 外乱磁場 17
AppendixA1 List of Figures 図のリスト 18A2 List of Tables 表のリスト 18A3 Revision History 改定履歴 19
DATASHEETALPS P/N: HGARAP001A
SBD GA-080
( 3/19 )
1 Product Description 製品説明
1.1 Overview 概要
ALPS Product No. HGARAP001ACharacteristic Angle SensorPackage type MSOP-8pinSupply Voltage max. 5.5VOperating Magnetic Field 20 ~ 60 mTOperating Temperature -40 ~ 105 deg.CInterface Analog Output
Figure 1-1 Image of HGARAP001A in the MSOP-8pin Package
1.2 Target Appliations ターゲットアプリケーション
AutomotiveIndustrialBuilding AutomationOffice AutomationHome Appliance
SBD GA-080DATASHEETALPS P/N: HGARAP001A
( 4/19 )
2 Functional Description 機能説明
2.1 Pin Configuration ピン配置
Figure 2-1 Pin Configuration
2.2 Pin Description ピン機能
Table 2-1 Pin Description
[note]Pin 2 and pin 6(VDD) must be connected on external circuit. Disconnected internally.Pin 4 and pin 8(GND) must be connected on external circuit. Disconnected internally.pin-2とpin-6, 及び pin-4とpin-8はPKG外部で接続してお使い下さい。(内部ではつながっておりません)
SBD GA-080
VDD 7 -sin out3 +sin out 62
VDD
Pin No.
DATASHEETALPS P/N: HGARAP001A
-cos out 8
4 GND 5 +cos out
GNDFunction Pin No. Function
1
1 4
58
( 5/19 )
3 Specifications 仕様
3.1 Absolute Maximum Ratings 絶対最大定格
Table 3-1 Absolute Maximum Rating Parameters
[note]
3.2 Operating Conditions 動作条件
Table 3-2 Operating Conditions
* the applied horizontal magnetic field rotated above the sensor
Magnetic Field Strength Hext*20 - 60 mT16 - 48 kA/m
Parameter Symbol
Even if it is use within the maximum rating, continuous use on a high stress (high temperature and highsuperimposed voltage/large current drive, etc.) might spoil the product reliability.最大定格内の使用であっても高負荷(高温および高電圧印加/大電流駆動etc.での連続使用は製品の信頼性を低下させる恐れがあります。
SBD GA-080
Max.
The maximum rating is the value that must not be exceeded it even if it is momentary. There is a possibility ofthe breakdown and/or destruction when this value is exceeded.
Magnetic Field Strength
最大定格とは、たとえ瞬間的であっても超えてはならない値であり、この値を超えた場合、故障・破壊の可能性があります。
deg.C
NoteMin. Typ.
ValuesUnit
Note
Operating Temperature Top -40 - 105
Storage Temperature TstgVDD -
Hext- - 200 mT
- 5.5 V
at Room Temp.- - 160 kA/m
-40 -Supply Voltage
DATASHEETALPS P/N: HGARAP001A
Min. Typ. Max.Parameter Symbol
ValuesUnit
105 deg.C
( 6/19 )
3.3 Basic Characteristics 基本特性
Table 3-3 Basic Characteristics
3.4 Electric Characteristics 電気特性
Table 3-4 Electric Characteristics @25deg.C
[note]
SBD GA-080
(6)
Unless otherwise specified, measurement condition is as follows.VDD=5V, Hext=30mT, Top=25deg.C on the circuit described in Figure3-1特に注記ない限り、測定条件は下記の通り測定回路(Figure3-1), VDD=5V, Hext=30mT, Top=25deg.C .
Waveform Distortion Wd -
- - 1.0Angular Accuracy ∆α deg.
mV (5)
(3)Phase Difference Pdiff 87.5 90 92.5 deg.
Center Voltage Vcenter 2.45 2.5 2.55
(4)Peak to Peak Voltage Vpeak 490 550 610 mVp-p
V (2)
3.5 3.85 kOhm at Room Temp.
Bridge Resistance Rtotal 1.575 1.75 1.925 kOhmTemperature Coefficientof Bridge Resistance TcR - - 1600 ppm/deg.C
Parameter SymbolValues
- 7
Unit NoteTyp. Max.
Tc⊿R -3900 - - ppm/deg.C
at Room Temp.
-40 ~105deg.C
-40 ~105deg.C
SymbolValues
Unit Note
DATASHEETALPS P/N: HGARAP001A
Min.
Rel 3.15
Min. Typ. Max.
Temperature Coefficientof Change Rate ofMagnetoresistance
Offset Voltage Voffset -12.5 0 12.5 mV
Parameter
(1)
Each ElementResistance
( 7/19 )
Definition of Parameter パラメータの定義
(1) Voffset =
* The same calculation is applied to “+cos out” and “-cos out”.
(2) Vcenter =
* The same calculation is applied to “-sin out”,“+cos out” and “-cos out”.
(3) Vpeak = (+sin out.max.) - (+sin out.min.) + (-sin out.max.) - (-sin out.min.)
* The same calculation is applied to “cos out”.* Vpeak ratio is defined as ratio of Vpeak_sin and Vpeak_cos.
(4) Pdiff = SinPhase - CosPhase* SinPhase: Phase of Vsin* CosPhase: Phase of Vcos* Vsin and Vcos are ideal curve.
(5) Wd = Max. | Vmeas – Videal |* Vmeas: measured value* Videal: ideal curve
(6) ∆α:= Max.| αmeas – αideal |* αmeas : caluculated angle from measured value* αideal: ideal angle caluculated from Vsin and Vcos* Vsin and Vcos are ideal curve.
DATASHEETALPS P/N: HGARAP001A
SBD GA-080
2.)minsin(.)maxsin(
2.)minsin(.)maxsin( outoutoutout −+−−
+++
2.)minsin(.)maxsin( outout +++
( 8/19 )
+ Direction
- Direction
Figure 3-1 Evaluation Circuit and Definition of Magnetic Field Direction
Figure 3-2 Equivalent Circuit
DATASHEETALPS P/N: HGARAP001A
SBD GA-080
GNDVDD
0deg.
VDD
( 9/19 )
a) Definition of Vsin
b) Definition of Vcos
c) Definition of PdiffFigure 3-3 Definition of Vsin, Vcos, and Pdiff
SBD GA-080DATASHEETALPS P/N: HGARAP001A
-0.6-0.4-0.2-1E-150.20.40.6
2.352.4
2.452.5
2.552.6
2.65
0
45
90
135
180
225
270
315
360
Vsin
[V]
Out
put V
olta
ge [V
]
Rotation Angle [deg.]
+sin -sin Vsin
-0.6-0.4-0.2-1E-150.20.40.6
2.352.4
2.452.5
2.552.6
2.65
0
45
90
135
180
225
270
315
360
Vcos
[V]
Out
put V
olta
ge [V
]
Rotation Angle [deg.]
+cos -cos Vcos
-0.3-0.2-0.1
00.10.20.3
0
45
90
135
180
225
270
315
360
Vsin
, Vco
s [V
]
Rotation Angle [deg.]
Vsin Vcos
Pdiff
( 10/19 )
4 Package Information パッケージ情報
4.1 Appearance 外観
各部の仕上げは良好で機能上有害な錆、傷、割れが有ってはならない。
4.2 Package Outline 外形図
Figure 4-1 Package Outline (All dimensions in mm)
The sensor shall be in good appearance, and have no functional failure or excessive damage suchas rust, cracks, and split in any part.
DATASHEETALPS P/N: HGARAP001A
SBD GA-080
Center of Sensitivity
(0.46)
Center of Sensitivity
1.475±0.2
1.4
±0.2
( 11/19 )
4.3 Footprint フットプリント
Figure 4-2 Recommended Footprint (Reference)
4.4 Package Marking 捺印
①②③④⑤: Wafer No.
⑥: Product ID
Figure 4-3 Marking of HGARAP001A
SBD GA-080DATASHEETALPS P/N: HGARAP001A
Combination of numbers, 1 to 9, andalphabets, A to Z.
”Y" for HGARAP001A
( 12/19 )
4.4 Structure 構造
Figure 4-4 Internal Structure
Table 4-1 Components
DATASHEET SBD GA-080
Au
Molding Mold Resin Epoxy Resin
ALPS P/N: HGARAP001A
Si
Process Parts Name Materials
Lead Frame Cu, Ag-Plating
Wire Bonding Wire
Die Mount
Sensor Chip
Adhesive for Die Bonding Silver Paste
Terminal Plating Outer Terminal Plating Sn-Bi
Wire
Lead Frame
Adhesive
Sensor Chip
Mold Resin
Outer Terminal Plating
( 13/19 )
5 Packing Specifications 梱包仕様
5.1 Packing Information 梱包情報
Figure 5-1 Emboss Tape Dimensions
Figure 5-2 Reel Dimensions
SBD GA-080DATASHEETALPS P/N: HGARAP001A
Table Side Cross Section
Enlarged Pictureof Center Part
( 14/19 )
5.2 Packing Specifications 梱包仕様
Figure 5-3 Orientation of Product Storing
Figure 5-4 Feeding Direction
Figure 5-5 Taping Specification
SBD GA-080DATASHEETALPS P/N: HGARAP001A
Emboss Tape
Product
Feeding Direction
Bar Code Label
Feeding Direction
160~200mm 160~200mm 600~800mm3,000PCS
( 15/19 )
Peel strength of cover tape shall be 0.1N(10g)~0.7N(70g) for 300mm/min.
エンボステープとトップカバーテープの剥離強度は、300mm/min において、0.1N(10g)~0.7N(70g)とする。
Figure 5-6 Peel Strength
A = MAX 1/2φ B = MAX 0.5mm
Figure 5-7 Top cover Tape Offset
SBD GA-080DATASHEETALPS P/N: HGARAP001A
The emboss tape is fixed.
Emboss tape Emboss tape
Top cover tape
φ
( 16/19 )
6 Reliability Test Conditions 信頼性試験条件
6.1 Preconditioning for Reliability Test 信頼性試験の前処理
Baking 【125×24Hr】 + Moisture Absorption【85±585±5%×168Hr】 + Reflow 2times
Figure 6-1 Reflow Profile for Pre-Conditioning
6.2 Reliability Test Items 信頼性試験項目
Table 6-1 Package Reliability Test Items
Thermal Cycle Applied
Low Temp.Storage N/A
High Temp. HighHumidity Bias
-40±5deg.C
+85±5deg.C, 85±5%RH, VDD=5±0.5V Bias
+125±5degC, VDD=5±0.5V Bias
1cycle: -40±3degC(30min)→+125±3degC(30min)
±350V, 150pF, 330Ω, interval 10sec.ESD N/A3 times
per eachterminal
Pre-Conditioning
Applied
Testing Time
500Hr
500Hr
500Hr
300cycle
High Temp. Bias Applied
SBD GA-080 DATASHEETALPS P/N: HGARAP001A
Test Items Testing Methods / Conditions
60~180s
150
200
60~150s220
260 max
time (s)
Tem
pera
ture
Heating
Pre-Heat
( 17/19 )
7 Precautions When Handling Magnetic Sensor 製品お取り扱い時の注意
7.1 Storage Environment 保管環境
7.2 Long-term Storage 長期保管
7.3 ESD 静電気ESD
7.4 External Magnetic Field 外乱磁場
Figure 7-1 Influence on Detection Angle by External Magnetic Field
Long-term storage may result in poor lead solder ability and degraded electrical performance evenunder proper conditions. For those part that stored more than 1 year, solder ability should bechecked before use. For storage longer than 1 year, it is recommended to store in nitrogenatmosphere. Oxygen in atmosphere oxidant leads of products and lead solder ability get worse.
適切な保管環境でも長期に保管した場合は、リ-ド端子の半田付け性が悪くなったり、電気特性が不良になる場合がありますので、長期保管した場合は、半田付け性や電気特性をご確認の上、ご使用下さい。保管が長期(1年以上)に及ぶ場合は、窒素雰囲気中での保管をお勧めします。大気中で保管されますと、大気中の酸素により素子のリ-ド部分が酸化され、リ-ド端子の半田付け性が悪くなります。
This products does NOT have built in ESD protect circuit, so it may break if over ESD applied to thiscircuit. Please take measure for ESD when handle the products. Conducted container isrecommended for product conveyance and packing instead of plastic container. Please connectground line and use non high voltage leakage, when using soldering iron or external measurementcircuit.
本製品は静電気保護回路を内蔵していません。その能力を超える静電気が加わった場合には破壊されることがありますので、製品を取り扱う場合には充分な静電気対策を実施してください。包装・運搬容器はプラスチック製を極力避け、導電容器をご使用ください。また製品のハンドリングについても充分に考慮してください。(リストストラップの使用等)はんだごてや測定回路などは高電圧リークのないものを、必ずアースを取ってご使用ください。
This sensor has detects the direction of the magnetic field that the installed magnet on themeasurement device makes. Therefore, please note that an external magnetic field in the systemenvironment influences the angle detection of the sensor. (see Figure 7-1)
本製品は、被測定物に取付けた磁石が作る磁界の方向を検出しています。従って、使用環境における外部磁界が、センサの角度検出に影響を及ぼしますので、ご注意下さい。(Figure 7-1参照)
DATASHEETALPS P/N: HGARAP001A
SBD GA-080
Products should be stored at an appropriate temperature and humidity (Recommended storagecondition). Keep products away from chlorine and corrosive gas. There is a thing that influencesproduct features when keeping it in an improper environment.
適切な温度・湿度環境(推奨保管条件)で保管していただけるようお願いします。また、塩素や腐食性のあるガスも避けるようお願いします。不適切な環境で保管した場合は、製品特性に影響する事があります。
Magnetic field with magnetinstalled on measurement device:v
External magnetic field:u
Direction of magnetic fieldthat sensor detects:wAngle error:θ
( 18/19 )
Appendix
A1 List of Figures 図のリスト
Figure 1-1 Image of HGARAP001A in the MSOP-8pin Package 3Figure 2-1 Pin Configuration 4Figure 3-1 Evaluation Circuit and Definition of Magnetic Field Direction 8Figure 3-2 Equivalent Circuit 8Figure 3-3 Definition of Vsin, Vcos, and Pdiff 9Figure 4-1 Package Outline (All dimensions in mm) 10Figure 4-2 Recommended Footprint (Reference) 11Figure 4-3 Marking of HGARAP001A 11Figure 4-4 Internal Structure 12Figure 5-1 Emboss Tape Dimensions 13Figure 5-2 Reel Dimensions 13Figure 5-3 Orientation of Product Storing 14Figure 5-4 Feeding Direction 14Figure 5-5 Taping Specification 14Figure 5-6 Peel Strength 15Figure 5-7 Top cover Tape Offset 15Figure 6-1 Reflow Profile for Pre-Conditioning 16Figure 7-1 Influence on Detection Angle by External Magnetic Field 17
A2 List of Tables 表のリスト
Table 2-1 Pin Description 4Table 3-1 Absolute Maximum Rating Parameters 5Table 3-2 Operating Conditions 5Table 3-3 Basic Characteristics 6Table 3-4 Electric Characteristics @25deg.C 6Table 4-1 Components 12Table 6-1 Package Reliability Test Items 16
DATASHEETALPS P/N: HGARAP001A
SBD GA-080
( 19/19 )
Appendix
A3 Document Revision History 改定履歴
DescriptionFirst release
DATASHEETALPS P/N: HGARAP001A
SBD GA-080
Revision DateAug.21, 201501
top related