copyright 2009 tecnosteel srl – all rights...
Post on 09-Oct-2019
1 Views
Preview:
TRANSCRIPT
Copyright 2009 Tecnosteel SRL – All rights reserved
2
p a g e
ActiPower
Actipower è un’unità evoluta per la distribuzione e il controllo dell’alimentazione di server installati in armadi rack. Actipower, inoltre, è l’unica unità di distribuzione dell’alimentazione che permette il controllo sia delle variabili elettriche che di quelle micro ambientali.A seconda della versione, ActiPower permette il controllo del carico elettrico totale e per singola presa nei modelli “switched”; la possibilità di accensione e spegnimento per singola presa in remoto; la possibilità di programmare l’accensione sequen-ziale delle prese per evitare picchi di assorbimento dei singoli apparati. La vera novità è rappresentata dall’unità di controllo ambientale integrata nella ActiPower, che permette il monito-raggio di temperatura, umidità, presenza fumi e presenza ac-qua, apertura porte. Questo permette di ridurre sensibilmente i fermo macchina. Un display alfanumerico permette la lettura in locale degli assorbimenti dei singoli apparati connessi e la lettura degli altri parametri gestiti.ActiPower è dotata di un server web “on board” che permette di controllare i parametri citati tramite un internet browser. L’invio degli allarmi può avvenire tramite e-mail o tramite l’invio di Trap SNMP standard.
ActiPower is an advanced power distribution and control unit for servers mounted into racks. In addition, ActiPower is the only PDU which allows the monitoring both of the electrical and environmental parameters.According to the version, ActiPower allows to monitor the total electrical load and for single socket in the “switched” version; the possibility to switch on/off each single socket in remote control, the possibility to set the sequential switch on of each socket in order to prevent single server electrical input peaks. The main and new features is the integration of an environ-ment control unit in the ActiPower. This feature allows to moni-tor temperature, humidity, presence of smoke and water, open door status and improve the reduction of the servers stop. An alphanumerical display allow to read the electrical input of the connected machines and the reading of the other parameters.ActiPower is equipped with a server web which allows the mon-itoring of the above parameters through an internet browser. Alarms can be sent through an e-mail or through the sending of standard SNMP trap.
Monitoraggio/Monitoring• Totale corrente assorbita Total input current• Corrente assorbita per singola presa Single socket input current• Stato singola presa Single socket status• Stato ActiPower ActiPower status• Controllo in tempo reale della temperatura e
dell’umidità ActiPower status• Temperatura e umidità Temeperature and humidity• Presenza fumi Smoke presence• Presenza acqua o liquidi Water or liquid presence• Stato di aperture porte Door opening status
Controllo (secondo versione)
Check (depending on the version)
• Accensione/spegnimento del totale delle prese Switch on /off of all the sockets• Riaccensione sequenziale programmabile del-
le prese Programmable sequential switch on of the so-
ckets• Accensione/spegnimento singola presa Single socket switch on/off
Allarmi/Alarms• Settaggio carico totale minimo e Massimo Minimum and maximum total load setting• Settaggio carico mini/max per singola presa Single socket minimum and maximun load set-
ting• Settaggio temperatura e umidità mini/max Minimum and maximum temperatur and humi-
dity setting• Allarme sonoro programmabile Programmable loud alarm• Invio programmabile di e-mail di allarme Programmable sending of alarm e-mail• Protocollo SNMP standard per invio di allarmi Standard SNMP protocol to send alarms• Allarme sovraccarico Overload alarm• Allarme presenza fumi Smoke alarm• Allarme presenza acqua Water alarm• Allarme apertura porte o pannelli Open doors (or side) alarm• Log degli allarmi Alarms log
Interfaccia WEB/WEB iterface
Copyright 2009 Tecnosteel SRL – All rights reserved
3
p a g e
Copyright 2009 Tecnosteel SRL – All rights reserved
3
p a g e
Product Picture & Description1. Circuit Breaker2. Display3. RUN: operation indicator;
M/S: master/slave ActiPower indicator 4. OUTLET No.1: select outlet address (1-8way) 5. OUTLET No.2: Work with OUTLET No.1 to select the outlet address
(adds 8 ports or reduce 8 ports) 6. RESET: master or slave ActiPower selection; reset button 7. Water: for connecting with water logging sensor 8. Smoke: for connecting with smoke sensor 9. Port2: RS485 spare port 10. NET: if you want to control ActiPower through network, this port is used
to connect with the RJ45 port of the PC, HUB, router or exchanger 11. SER: input for daisy-chain configuration12. LINK: output for daisy-chain configuration 13. Port1: software upgrading port14. Door1, Door2: for connecting with door opening sensor15. T/H1&T/H2&T/H3: temperature/humidity sensor 16. Socket (max 24)17. Input cable18. Mounting hole
Immagini & Descrizioni del Prodotto1. Interruttore magnetotermico2. Display3. RUN: LED funzionamento;
M/S: LED indicatore master/slave 4. Selettore presa di uscita5. Selettore supplementare prese di uscita6. RESET: selezione master or slave e tasto reset7. Water: porta sensore presenza acqua/liquidi8. Smoke: porta sensore presenza fumo9. Port2: porta supplementare RS48510. NET: porta RJ45 per connessione al PC/HUB/router11. SER: porta entrata per configurazione daisy-chain12. LINK: porta uscita per configurazione daisy-chain 13. Port1: ingresso aggiornamento software 14. Door1, Door2: sensore apertura porte15. T/H1&T/H2&T/H3: sensori temperatura e umidità16. Prese (massimo 24) 17. Cavo di alimentazione18. Fori per il montaggio
16
1
18
2
17
18
3
7
4
5
6
8
9
15
14
12
13
11
10
F3501 - F3502 - F3504
Product Picture & Description1. Display the address and value of outlets2. RUN: operation indicator;
M/S: master/slave ActiPower indicator 3. OUTLET: select outlet address (1-8way) 4. RESET: master or slave ActiPower selection; reset button 5. Water: with water logging sensor connecting6. Smoke: with smoke sensor connecting 7. Port2: RS485 spare port 8. NET: if you want to control ActiPower through network,
this port is used to connect with the RJ45 port of the PC, HUB, router or exchanger
9. SER: input for daisy-chain configuration10. LINK: output for daisy-chain configuration 11. Port1: the software upgrading port in hardware 12. Door1, Door2: door opening sensor 13. T/H1&T/H2&T/H3: temperature/humidity sensor 14. Socket (max 8)15. Input cable16. Mounting hole
Immagini & Descrizioni del Prodotto1. Display2. RUN: LED funzionamento;
M/S: LED indicatore master/slave 3. Selettore presa di uscita4. RESET: selezione master or slave e tasto reset5. Water: porta sensore presenza acqua/liquidi6. Smoke: porta sensore presenza fumo7. Port2: porta supplementare RS4858. NET: porta RJ45 per connessione al PC/HUB/router9. SER: porta entrata per configurazione daisy-chain10. LINK: porta uscita per configurazione daisy-chain 11. Port1: ingresso aggiornamento software 12. Door1, Door2: sensore apertura porte13. T/H1&T/H2&T/H3: connessioni per
sensori temperatura e umidità14. Prese (massimo 8)15. Cavo di alimentazione16. Fori per il montaggio
Copyright 2009 Tecnosteel SRL – All rights reserved
4
p a g e
4
p a g e
14
16
16
15
1
12
2 3
9 81011
65
4
7
13
F3520
Copyright 2009 Tecnosteel SRL – All rights reserved
5
p a g e
Copyright 2009 Tecnosteel SRL – All rights reserved
5
p a g e
Caratteristiche tecniche/Technical datasheet
No. /Performance parameter Parametri tecnici/Technical parameter
1 IngressiInput
tensionediingresso/ratedinputvoltage 125/250VAC50/60Hz•380VAC50/60Hz
tipoconnettore/Iinputterminaltype IEC60309industrialstandardplug/IP44
specificacavo/cablespecification 3x2.5mm23x6.0mm2
lunghezzacavo/cablelength 3m
Massimacorrentediingresso/Maxinputcurrent 16A-32A•2x16A-32A•3x16A-32A
2 UsciteOutlet
presestandard/socketstandard IEC320C13,C19
numerodiprese/numberofsockets8versioneorizzontale19”/8(19”horizzontalversion)
massimo24montaggioverticale/max24(verticalinstallation)
accensione/spegnimentosingolapresapoweron/offstateofindividualoutlet
X1LEDdisplay
accessorioopzionalesostituzionefusibilereplaceablefusefitting(optional)
Protezionedisicurezza/Outletsafetyprotection Protezioneanti-cadutaAnti-fallprotectionfitting
TensionediuscitaIRatedoutletvoltage 125/250VAC•250VAC
Caricomassimodicorrente/Maxtotalloadcurrent 16A-32A•2x16A,32A•3x16A-32A
3 PortedicontrolloControlport
Portadicomunicazione/Networkport 1RJ45port
porta232-485232/485port 1RJ45port
portadaisy-chain/daisy-chainport 1RJ45port
portadiingressoperaggiornamentosoftwaresoftwareupgradeport 1RJ45port
PortasenxsoritemperaturaeumiditàTemperature/humiditysensorport 3RJ11port
Portasensorepresenzafumo/Smokesensorport 1RJ11port
Portasensorepresenzaacqua/Waterloggingsensorport 1RJ11port
Portasensoreaperturaporte/Dooropensensorport 2RJ11port
Portasupplementare/Sparesensorport 1RJ11port
4 Display
Indicatoredifunzionamento/Workingstate 1LED
Configurazionemaster/slaveMaster/slavestate 1LED
Letturauscitatemperatura/umiditàOutputtemperature/humidityaddress 3LED
Valorecaricocorrente,temperatura/umiditàLoadcurrent,temperature/humidityvalue 3LED
5
Letturacorrentedicarico
Loadcurrentdisplay
Correntetotale/Totalcurrent Full-scale:32A/16A•Accuracy:±1%+2Resolution:200mA•Responsetime:400s
Correntesingolapresa/Individualloadcurrent Full-scale:10A•Accuracy:±1%+1Resolution:100mA•Responsetime:400s
6
Temperaturaeumidità
Temperatureandhumidity
Temperatura/Temperature Workingrange-40°C+124°C-Accuracy:±1%+1
Umidità/Humidity Accuracy±5RHResponsetime4s
7 MontaggioMounting
1U19”
0U
8 Colore/Casecolor Nero/Black
9 AccessoriFittings
Staffepermontaggio/Installationbracket 1set
Cavodiconnessioneallarete/Networkconnectionwire 2M,blue
CavodiconnessioneDaisy-chainDaisy-chainconnectionwire 2M,yellow
Manualed’uso/Usermanual 1setCD(Optional)
10Accessoriopzopnali
Optionalfittings
SensoriSensors
Temperature/humiditysensor(Orderapart)
Smokesensor(Orderapart)
Doorsensor(Orderapart)
Waterloggingsensor(Orderapart)
11Parametri
ambientaliEnvironment
Temperaturad’esercizio/Workingtemperature 0C°~55C°
Umiditàrelativa/Relativehumidity 10~90%
12 ROHS compliance
Dispositivo permontaggio rapido
Device for quick mounting
Montaggio verticale Vertical assembly
Caratteristiche speciali Special features
Copyright 2009 Tecnosteel SRL – All rights reserved
6
p a g e
6
p a g e
Codice/-
Code
Tipo-
Type
Carico elettrico
totale-
Total load
Carico elettrico singola presa
-Single socket
load
ON/OFF singola presa
-Single
socket ON/OFF
Accensione sequenziale
-Sequential
reboot
Monitoraggio parametri ambientali
-Environmental
parameters monitoring
WEB
E-mail e allarmi SNMP
and SNMP alarms
Montaggio-
Mounting
F3502 Metered • • • 0U
F3501 Switched • • • • • • 0U
F3504 Full Option • • • • • • • 0U
F3520 Full Option • • • • • • • 1U
Tecnosteel s.r.l.ViaPret12-21020Brunello(Va)-Italytel.+390332462604fax:+390332462609commerciale@tecnosteel.itwww.tecnosteel.it
Tecnosteel FranceZIdesDévodes-9AlléedesDévodesF-91160SaulxlesChartreuxtel.+33(0)169741735•fax+33(0)164483185info@tecnosteel.frwww.tecnosteel.fr
Head quarter France Tecnosteel Sp. z.o.oul.Kosciuszki6,PL-97500Radomskotel.+48(0)446823300fax:+48(0)446823300e-mail:info@tecnosteel.pl•www.tecnosteel.pl
Polska
7
p a g e
Sensore presenza acquaWater sensor
Temperatura e umiditàTemperatur/Humidity
Presenza fumoSmoke
Stato porteDoors opening
Sensori sensors
Le informazioni contenute nel presente documento sono corret-te al momento dell’emissione e possono subire modifiche senza preavviso. Le immagini hanno il solo scopo di illustrare il prodotto e sono soggette a cambiamenti a discrezione del produttore.
The information herein contained are correct at the time of issue and are subjected to changes without any notice. The images are only intended to illustrate the product and can change at the manufacturer’s discretion.
Montaggio orizzontale Horizontal assembly
top related