chemicalfumes and extraction system model ......chemicalfumes and extraction system model...
Post on 30-Mar-2020
4 Views
Preview:
TRANSCRIPT
Chemical Fumes Laser Dust and Extraction System Model LCFE1704
Main Fume Extraction
ControlUnit
A ldjustable ength Gooseneckhigh temperature Fume Hosesupplied with 1.5 meter length.Customized more length ofsame available as per requiredpositioning.
• 1xMain Extraction unit
Extraction Arm• 1x (75mm dia, 1. meter long)5
Hood Square Metallic (180x180mm)• 1xSpeed Control Regulator• 1x
• 5 Spare Pre-Filtersx
Scope of Supply
Speed Control Regulator
On/Off witchS
Speed Control
Increase speed
Decrease speed
• Input Power SupplyNo of Workplaces • Stationary Pressure • • Maximum Airflow RateFiltering Efficiency (0.3um)• Noise Level• Dimension (LxWxH) (approx)•
: 230V/50Hz, 250W: 1: 3000 Pa: 25 m /h0 3
: 99.97%: <65dB: 470 x 230 x 350mm
Specifications
reliable & caring since 1976
AirflowSettingSwitches
Speed ControlRegulator Connector
powerful urbineT supplied with all accessoriesmaintenance-free Brushless ●
System Choke Alarm:When display shows
circular movement clockwise plus OFF
and system beeps,it means Filtersany of
needs replacement.
Digital Display Indicator
Air Flow Controlling Knob to control the Air FlowVarious types of Chemical Fumes Extraction possibilities
Metallic Square 180x180 m mAir Purifier Fume Hood has
A Fmechanical ir low Controller
Mechanical Air Flow
Controller
Air Flow Controller positionfully open
Air Flow Controller positionfully closed
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
Website: www.indeonline.in Landline: 0172-4614415 Email: info@indeonline.inCell Phones: 8283820745 & 9316134502
Features
reliable & caring since 1976
1. Normally Pre-Filter need periodic replacement when there is less suction of fumes.low cost s
2. hese Filters should be washed nor should be cleaned with compressed air .None of t at all
Details of -Stage Filters used in this Extraction System4 Chemical & Laser Dust Fumes
● Metal Framed Main Filter: This Metal Framed Filter,Stage IV besides absorbing very fine particles thru its HEPA Filter, also absorbs obnoxious chemical fumes because of its Charcoal & Alkalined based other stages.
● Pre-Filter: The Pre-Filter filters the bigger size particles Stage I for prolonging the life of both Middle and Main Filters.
● Metal Framed Middle Filter: It filters coarse size fume Stage II particles to prolong life of expensive Metal Framed Main Filter.
Stage I ● Pre-Filter: This Pre-Filter prolongs life of expensive II Metal Framed Main Filter so as to minimize its replacement.
Stage IV Metal Framed
, Charcoal &HEPAAlkaline combined
Main Filter
Stage I Pre-Filter
Stage IIMetal FramedMiddle Filter
Stage I IIPre-Filter
• Hassle-free easy-to-start operation with all inclusive kit supplied
• Easy-to-manoeuver positioning of Fume Extraction Arm
• Reliable & virtually maintenance-free Brushless DC Turbine
• Has low noise (< 65 dBA) in continuous running operation
• Special Main Filter with its last stage of Alkaline type, makes sure to remove obnoxious harmful chemical fumes
• Low running cost as normally low cost Pre-Filter mainlyneed replacement periodically as and when there is choking of fumes extraction.
• Middle Filter and Main Filter are in Metal Frames
• Ready availability of all spare parts from stock
Length of the Extraction Arm is easily adjustable,as this is made from press-fit type small sections which easily adjustable in length by selectionare
per length.of these sections as required
This is hi-end volume extraction type and ready-to-use Chemical Fume & Laser Dust Extraction System. It is designed for continuous working reliably on main production line. It has very powerful and maintenance-free Brushless Turbine and Electronic Speed Control Unit. Its metal framed special Middle Filter and Main Filterprovide clean working environment. The electronic Speed Controller regulates air-flow volume.
Ready-to-use Chemical Fume and Laser Dust
Extraction System Model LCFE1704 is fitted with
4-stage Filters: Pre-Filter, Metal Framed
Middle Filter, another Pre-Filter, Metal Framed
special Main Filter with last alkaline stage.
Combination of all these Filters cleans chemically
polluted air by absorbing these obnoxious fumes.
This System is designed for use both in industrial
and in laboratory environment. All it needs is merely
mains input Power Supply.
Pre-FilterP/N:PF-LCFE1704
Pre-FilterP/N:PF-LCFE1704
Metal FramedHEPA, Charcoal & Alkaline Main FilterP/N:CMF-LCFE1704
Metal FramedMiddle FilterP/N:MF-LCFE1704
Chemical Fumes Laser Dust and Extraction System Model LCFE1704
powerful urbineT supplied with all accessoriesmaintenance-free Brushless ●
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
Website: www.indeonline.in Landline: 0172-4614415 Email: info@indeonline.inCell Phones: 8283820745 & 9316134502
reliable & caring since 1976
2-Operators Solder Fumes Extraction System FES2-75ESDLCpowerful
Couple of 100's (in repeat orders) working reliably all over India for the last many years
Main Extraction Control Unit
Rigid Gooseneck Arms can be positioned anywhere on table and will stay in same place
No Plumbing requiredust position onj or
under the Table as needed
Metallic type Square Hoods
• 1xESD Safe Black Colour Main unit
ESD Safe Extraction Arms• 2x ( mm dia, 5 meter long)75 1.
Hoods• 2xMetallic Square Speed Control Regulator• 1x
pare Pre-FiltersS• 2x
Scope of Supply• Input Power Supply
No of Workplaces • Stationary Pressure •
• Maximum Airflow RateFiltering Efficiency (0.3um)• Noise Level• Dimension (LxWxH) (approx)•
: 230V/50Hz, W250: 2: 00 Pa30: m /h240 3
: 99.97%: <6 dB0: 470x230x500mm
Specifications
Ready-to-useCompletePackage
Caster wheels for easy mobility
Speed Control Regulator
On/Off switch
Speed Control
Increase speed
Decrease speed
AirflowSettingSwitches
Digital Display Indicator
Speed ControlRegulator Connector
Solder fumes extraction during hand soldering on PCB & Solder Pot tinning
System Choke Alarm:When display shows
circular movement clockwise plus OFF
and system beeps,it means Filtersany of
needs replacement.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
Website: www.indeonline.in Landline: 0172-4614415 Email: info@indeonline.inCell Phones: 8283820745 & 9316134502
reliable & caring since 1976
Stage III HEPA Filter
Stage I Pre-Filter
Unique Pre-CutMetal Plate
2- perators ready-to-use Solder oFumes Extraction System Model
is fitted with FES2-75ESD3-stage Filters: Pre-Filter, Middle Filter and HEPA Filter. /CharcoalCombination of these Filters cleans polluted air by separating 99.9% contaminated solder fumes. This System is designed for use both in industrial and laboratory environment. All it needs is
ains nput Power Supply only.m i
Stage IIMiddle Filter
Details of 3-Stage Filters used in this Fume Extraction System
1. Normally Pre-Filter only needs periodic replacement when there is less suction of fumes.
2. hese 3 Filters should never be washed nor should be cleaned with compressed air at all.T
Couple of 100's (in repeat orders) working reliably all over India for the last many years
Pre-FilterP/N:PF-PRO201
Metal Plate
Middle FilterP/N:MF-PRO201
Main Filter HEPA/CharcoalP/N:HF-PRO201
● Pre-Filter: The Pre-Filter filters the bigger size Stage I particles for prolonging the life of both Middle and Main Filters.
● Metal Plate: Metal Plate on top to increase the life of Filters
● Middle Filter: It filters coarse size fume particles Stage II to prolong life of expensive HEPA/Charcoal Filter
Features
Length of the Extraction Arm is easily adjustable,as this is made from press-fit type small sections which easily adjustable in length by selectionare
per length.of these sections as required
• Hassle free easy-to-start operation with all inclusive kit- supplied
• Easy-to-manoeuver Extraction Armspositioning of Fumes
• Reliable & virtually maintenance-free Brushless DC Turbine
• Has low noise (< 60 dBA) in operation continuous running
• Filters design removes hazardous gaseous/adhesive substances from fumes.
• Low running cost as normally low cost Pre-Filter mainlyneed replacement periodically as and when there is choking of fumes extraction.
• Readily availability of all spare parts from stock
FES2-75ESD reliable and really effective o is a volume extraction type 2- perators ready-to-use Solder Fume Extraction System. It is designed for continuous and reliable working on production line. Its powerful and maintenance-free brushless turbine combined with electronic speed control, provides clean working environment at low maintenance cost. The electronic Speed Controller regulates air-flow volume continuously.
● Main HEPA Filter:/Charcoal This Filter is a Stage III combination of HEPA (filters fine size fume particles) and A C ( )ctivated harcoal absorbs harmful gas substances Filters to provide clean air finally.
2-Operators Solder Fumes Extraction System FES2-75ESDLCpowerful
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
Website: www.indeonline.in Landline: 0172-4614415 Email: info@indeonline.inCell Phones: 8283820745 & 9316134502
reliable & caring since 1976
2-Operators Solder Fumes Extraction System FES2-75ESDTCpowerful
Couple of 100's (in repeat orders) working reliably all over India for the last many years
Main Extraction Control Unit
Rigid Gooseneck Arms can be positioned anywhere on table and will stay in same place
No extra Plumbing required
j connect ust supplied hoses thru Table Clamps
Metallic type Square Hoods
• 1xESD Safe Black Colour Main unit
ESD Safe Extraction Arms • 2x ( mm dia, 0.8 meter long)75 • 2xBench Clamps
2xSoft Connection Hose • 2xMetallic Square • Hoods
Speed Control Regulator• 1xpare Pre-FiltersS• 2x
Scope of Supply
• Input Power SupplyNo of Workplaces • Stationary Pressure •
• Maximum Airflow RateFiltering Efficiency (0.3um)• Noise Level• Dimension (LxWxH) (approx)•
: 230V/50Hz, W250: 2: 00 Pa30: m /h240 3
: 99.97%: <6 dB0: 470x230x500mm
Specifications
Ready-to-useCompletePackage
Caster wheels for easy mobility
Speed Control Regulator
On/Off switch
Speed Control
Increase speed
Decrease speed
AirflowSettingSwitches
Digital Display Indicator
Speed ControlRegulator Connector
Solder fumes extraction during hand soldering on PCB & Solder Pot tinning
System Choke Alarm:When display shows
circular movement clockwise plus OFF
and system beeps,it means Filtersany of
needs replacement.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
Website: www.indeonline.in Landline: 0172-4614415 Email: info@indeonline.inCell Phones: 8283820745 & 9316134502
reliable & caring since 1976
Stage III HEPA Filter
Stage I Pre-Filter
Unique Pre-CutMetal Plate
2- perators ready-to-use Solder oFumes Extraction System Model
is fitted with FES2-75ESD3-stage Filters: Pre-Filter, Middle Filter and HEPA Filter. /CharcoalCombination of these Filters cleans polluted air by separating 99.9% contaminated solder fumes. This System is designed for use both in industrial and laboratory environment. All it needs is
ains nput Power Supply only.m i
Stage IIMiddle Filter
Details of 3-Stage Filters used in this Fume Extraction System
1. Normally Pre-Filter only needs periodic replacement when there is less suction of fumes.
2. hese 3 Filters should never be washed nor should be cleaned with compressed air at all.T
Couple of 100's (in repeat orders) working reliably all over India for the last many years
Pre-FilterP/N:PF-PRO201
Metal Plate
Middle FilterP/N:MF-PRO201
Main Filter HEPA/CharcoalP/N:HF-PRO201
● Pre-Filter: The Pre-Filter filters the bigger size Stage I particles for prolonging the life of both Middle and Main Filters.
● Metal Plate: Metal Plate on top to increase the life of Filters
● Middle Filter: It filters coarse size fume particles Stage II to prolong life of expensive HEPA/Charcoal Filter
Features
Length of the Extraction Arm is easily adjustable,as this is made from press-fit type small sections which easily adjustable in length by selectionare
per length.of these sections as required
• Hassle free easy-to-start operation with all inclusive kit- supplied
• Easy-to-manoeuver Extraction Armspositioning of Fumes
• Reliable & virtually maintenance-free Brushless DC Turbine
• Has low noise (< 60 dBA) in operation continuous running
• Filters design removes hazardous gaseous/adhesive substances from fumes.
• Low running cost as normally low cost Pre-Filter mainlyneed replacement periodically as and when there is choking of fumes extraction.
• Readily availability of all spare parts from stock
FES2-75ESD reliable and really effective o is a volume extraction type 2- perators ready-to-use Solder Fume Extraction System. It is designed for continuous and reliable working on production line. Its powerful and maintenance-free brushless turbine combined with electronic speed control, provides clean working environment at low maintenance cost. The electronic Speed Controller regulates air-flow volume continuously.
● Main HEPA Filter:/Charcoal This Filter is a Stage III combination of HEPA (filters fine size fume particles) and A C ( )ctivated harcoal absorbs harmful gas substances Filters to provide clean air finally.
2-Operators Solder Fumes Extraction System FES2-75ESDTCpowerful
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
Website: www.indeonline.in Landline: 0172-4614415 Email: info@indeonline.inCell Phones: 8283820745 & 9316134502
reliable & caring since 1976
2-Operators Solder Fumes Extraction System FES2-50ESDpowerful
over 1000 units (in repeat orders) working reliably all over India for the last many years
• 1xESD Safe Black Colour Main unitESD Safe Extraction Arms• 2x
(50mm dia, 1.2 meter long) ESD Safe Round Hoods• 2xSpeed Control Regulator• 1x
pare Pre-FiltersS• 2x
Scope of Supply includes all offollowing to make it ready-to-use
• Input Power SupplyNo of Workplaces • Stationary Pressure •
• Maximum Airflow RateFiltering Efficiency (0.3um)• Noise Level• Dimension (LxWxH) (approx)•
: 230V/50Hz, W250: 2: 00 Pa30: m /h240 3
: 99.97%: <6 dB0: 470x230x500mm
Specifications
Speed Control Regulator
On/Off switch
Speed Control
Increase speed
Decrease speed
AirflowSettingSwitches
Digital Display Indicator
Speed ControlRegulator Connector
Solder fumes extraction during hand soldering on PCB & Solder Pot tinning
System Choke Alarm:When display shows
circular movement clockwise plus OFF
and system beeps,it means Filtersany of
needs replacement.
Burn-proof Round Hoods
Casterwheels
foreasy
mobility
2 Lockablewheels
Ready-to-useCompletePackage
No Plumbing requiredust position onj or
under the Table as needed
Rigid Gooseneck Arms can be
positioned anywhere on
table and will stay in same place
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
Website: www.indeonline.in Landline: 0172-4614415 Email: info@indeonline.inCell Phones: 8283820745 & 9316134502
reliable & caring since 1976
Stage III HEPA Filter
Stage I Pre-Filter
Unique Pre-CutMetal Plate
Uniquely designed top Metal Plate toextend life of all 3-Filters
2- perators ready-to-use Solder oFumes Extraction System Model
is fitted withFES2-50ESD topmetal plate and 3-stage Filters:Pre-Filter, Middle Filter and
/Charcoal HEPA Filter. Combinationof these Filters cleans polluted air byseparating 99.9% contaminated solderfumes. This System is designed for useboth in industrial and laboratory environment.
m iAll it needs is ains nput Power Supply only.
Stage IIMiddle Filter
Details of 3-Stage Filters used in this Fume Extraction Systemtop Metal Plate and
1. Normally Pre-Filter only needs periodic replacement when there is less suction of fumes.
2. hese 3 Filters should never be washed nor should be cleaned with compressed air at all.T
Pre-FilterP/N:PF-PRO201
Metal Plate
Middle FilterP/N:MF-PRO201
Main Filter HEPA/CharcoalP/N:HF-PRO201
● Pre-Filter: The Pre-Filter filters the bigger size Stage I particles for prolonging the life of both Middle and Main Filters.
● Metal Plate: Metal Plate on top to increase the life of Filters
● Middle Filter: It filters coarse size fume particles Stage II to prolong life of expensive HEPA/Charcoal Filter
Features
• Hassle free easy-to-start operation with all inclusive kit- supplied
• Easy-to-manoeuver Extraction Armspositioning of Fumes
• Reliable & virtually maintenance-free Brushless DC Turbine
• Has low noise (< 60 dBA) in operation continuous running
• Filters design removes hazardous gaseous/adhesive substances from fumes.
• Low running cost as normally low cost Pre-Filter mainlyneed replacement periodically as and when there is choking of fumes extraction.
• Readily availability of all spare parts from stock
FES2-50ESD reliable and really effective o is a volume extraction type 2- perators ready-to-use Solder Fume Extraction System. It is designed for continuous and reliable working on production line. Its powerful and maintenance-free brushless turbine combined with electronic speed control, provides clean working environment at low maintenance cost. The electronic Speed Controller regulates air-flow volume continuously.
● Main HEPA Filter:/Charcoal This Filter is a Stage III combination of HEPA (filters fine size fume particles) and A C ( )ctivated harcoal absorbs harmful gas substances Filters to provide clean air finally.
2-Operators Solder Fumes Extraction System FES2-50ESDpowerful
over 1000 units (in repeat orders) working reliably all over India for the last many years
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
Website: www.indeonline.in Landline: 0172-4614415 Email: info@indeonline.inCell Phones: 8283820745 & 9316134502
reliable & caring since 1976
2-Operators Solder Fumes Extraction System FumePRO201-75LCpowerful
Couple of 100's (in repeat orders) working reliably all over India for the last many years
FumePRO 201Main
ExtractionControl
Unit
Rigid Gooseneck Arms can be positioned anywhere on table and will stay in same place
No Plumbing requiredust position onj or
under the Table as needed
Burn-proof Metallic type Square Hoods(180x180mm)
• 1xFumePro201 Main Extraction unit
Extraction Arms• 2x ( mm dia, meter long)75 1.2
Metallic Square Hoods (180x180mm)• 2xSpeed Control Regulator• 1x
pare Pre-FiltersS• 2x
Scope of Supply• Input Power Supply
No of Workplaces • Stationary Pressure •
• Maximum Airflow RateFiltering Efficiency (0.3um)• Noise Level• Dimension (LxWxH) (approx)•
: 230V/50Hz, W250: 2: 00 Pa30: m /h240 3
: 99.97%: <6 dB0: 470x230x500mm
Specifications
Ready-to-useCompletePackage
Speed Control Regulator
On/Off switch
Speed Control
Increase speed
Decrease speed
AirflowSettingSwitches
Digital Display Indicator
Speed ControlRegulator Connector
Solder fumes extraction during hand soldering on PCB & Solder Pot tinning
System Choke Alarm:When display shows
circular movement clockwise plus OFF
and system beeps,it means Filtersany of
needs replacement.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
Website: www.indeonline.in Landline: 0172-4614415 Email: info@indeonline.inCell Phones: 8283820745 & 9316134502
reliable & caring since 1976
Stage III HEPA Filter
Stage I Pre-Filter
2- perators ready-to-use Solder oFumes Extraction System Model FumePRO201-75 is fitted with LC3-stage Filters: Pre-Filter, Middle Filter and HEPA Filter. /CharcoalCombination of these Filters cleans polluted air by separating 99.9% contaminated solder fumes. This System is designed for use both in industrial and laboratory environment. All it needs is
ains nput Power Supply only.m i
Stage IIMiddle Filter
Details of 3-Stage Filters used in this Fume Extraction System
1. Normally Pre-Filter only needs periodic replacement when there is less suction of fumes.
2. hese 3 Filters should never be washed nor should be cleaned with compressed air at all.T
2-Operators Solder Fumes Extraction System FumePRO201-75LCpowerful
Couple of 100's (in repeat orders) working reliably all over India for the last many years
Pre-FilterP/N:PF-PRO201
Middle FilterP/N:MF-PRO201
Main Filter HEPA/CharcoalP/N:HF-PRO201
● Pre-Filter: The Pre-Filter filters the bigger size Stage I particles for prolonging the life of both Middle and Main Filters.
● Middle Filter: It filters coarse size fume particles Stage II to prolong life of expensive HEPA/Charcoal Filter
Features
Length of the Extraction Arm is easily adjustable,as this is made from press-fit type small sections which easily adjustable in length by selectionare
per length.of these sections as required
• Hassle free easy-to-start operation with all inclusive kit- supplied
• Easy-to-manoeuver Extraction Armspositioning of Fumes
• Reliable & virtually maintenance-free Brushless DC Turbine
• Has low noise (< 60 dBA) in operation continuous running
• Filters design removes hazardous gaseous/adhesive substances from fumes.
• Low running cost as normally low cost Pre-Filter mainlyneed replacement periodically as and when there is choking of fumes extraction.
• Readily availability of all spare parts from stock
FumePRO201-75 is a volume extraction type 2- perators ready-to-use Solder LC reliable and really effective oFume Extraction System. It is designed for continuous and reliable working on production line. Its powerful and maintenance-free brushless turbine combined with electronic speed control, provides clean working environment at low maintenance cost. The electronic Speed Controller regulates air-flow volume continuously.
● Main HEPA Filter:/Charcoal This Filter is a Stage III combination of HEPA (filters fine size fume particles) and A C ( )ctivated harcoal absorbs harmful gas substances Filters to provide clean air finally.
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
Website: www.indeonline.in Landline: 0172-4614415 Email: info@indeonline.inCell Phones: 8283820745 & 9316134502
HEPA (High-efficient filter paper: Material - fiberglass) Filter
Middle ilter (Middle filter paper: Material - fiberglass)F
Pre-Filter (Filter Material - polypropylene)
Item
1
2
3
4
5
6
7
Refers to Q/320000BXS16-2006Efficiency and resistance tested by sodium flame
Test results
White and even
0.33
75.8
1.33
0.724
99.97 (0.3um)
196
1.55
Test
Appearance
Thickness: mm
Gram weight: g/m 2
Strength: KN/m
Efficiency:0.321/min.c m 2
Resistance:0.321/min.c m 2
Stiffness: Mn.m
Specification
White and even
0.32-0.34
/
≥1.2 (Portrait)
≥0.5 (Lateral)
≥98 (0.3um)
≤220
≥1.2
Item
1
2
3
4
5
6
7
Refers to Q/320000BXS16-2006Efficiency and resistance tested by sodium flame
Test results
White and even
0.34
69.7
1.44
0.733
66.67
36
1.75
Test
Appearance
Thickness: mm
Gram weight: g/m 2
Strength: KN/m
Efficiency:0.321/min.c m 2
Resistance:0.321/min.c m 2
Stiffness: Mn.m
Specification
White and even
0.32-0.34
/
≥1.2 (Portrait)
≥0.5 (Lateral)
≥60
30-40
≥1.2
Item
1 350 5-6 1 323 78 110
Gram persquare meter:
g/m2
Dustcapacity:
g/m2
Free statethickness:
mm
Filterspeed:
m/s
Initialresistance:
Pa
Artificialdust
efficiency:%
Specifications/Test Report of Filters used in FES2 & FumePRO201-Series
While the information contained herein in, has been carefully compiled to the best of our knowledge, nothing is intended as representation and warranty on our part; and no statement shall be construed as recommendation to infringe any of existing patents. We accept no liability of whatsoever for any faults and errors in the information contained herein. Contents of this catalogue and specifications of the products, are subject to change without notice due to continuous improvements.
shown trademarks are property of their respective owners.
Warranty is 12 months from the date of invoice. It excludes all consumable parts as Filters, Extraction Arms and Hoods
Website: www.indeonline.in Landline: 0172-4614415 Email: info@indeonline.inCell Phones: 8283820745 & 9316134502
reliable & caring since 1976
top related