castors wheels - find the needlepdfs.findtheneedle.co.uk/108419-1185.pdf · 2014. 10. 1. · 4 ross...
Post on 18-Aug-2021
11 Views
Preview:
TRANSCRIPT
CA S T O R S W H E E L S&
Soft Tread WheelsSoft tread means more resistance, which may result in being harder to push. They are however, quieter and kinder to the floors. Rubber, Non Marking Rubber, Polyurethane, High Temperature Rubber and Pneumatic wheels.
A Quick Guide to Selecting Castors & Wheels
CASTORSIn order to select the appropriate castors you must consider the following; load capacity, castor fittings and environmental conditions. Load CapacityFor the castor to be effective, you must consider the total load of the unit you wish to manoeuvre. You can use the following equation to determine your load capacity per castor.
Load Capacity ofCastor
Unit Load + Weight of Equipment
3
= 1
TON
For example a trolley requiring 4 castors, you take the total weight of the trolley, plus the maximum weight the trolley is to carry, and divide by 3. This will give you the load capacity requirement for each castor, allowing for a margin of safety. The margin of safety is built in to allow for different working conditions and uneven floor surfaces. Once you have your maximum load requirement, the next decision is to choose a castor fitting.
This guide is to help you identify the correct castors or wheels for your requirements.
Castor Fittings - Bolt Hole FittingA single central bolt hole fixing, with a swivelling castor housing and a bolt hole diameter of either M12 or M10. Can be fitted with a tubular expander to fit either round or square tubing. Swivel with brake is available.
Castor Fittings - Top Plate FittingA rectangular or square plate with 4 fixing bolts. The 4 bolts provide a strong fixing and distribute the weight evenly. Can be either swivelling castor, fixed or swivel with a brake.
WHEELSIn general the larger the wheel the more weight it can carry and the easier it is to move. Bearings in wheels will help to reduce friction and ease movement. Wheels can be divided into two categories. Hard Tread WheelsEasiest to push, least resistance, but can be noisy and damage certain floors. Available in Cast Iron and Steel, Nylon, Polypropylene and Phenolic ( High Temp ).
BEARINGSThere are 4 types of bearings which can help reduce rolling resistance. The choice, like the wheels, depends upon the application, working environment, load capacities and the amount of movement required. Plain Bearings - for light loads moving over short distances Roller Bearings- reduces resistance for heavy loads on short distances Ball Journal – precision bearings for heavy loads with constant movement Tapered Roller Bearing – for the largest loads.
SPECIAL APPLICATIONSWe also offer a range of special application castors and wheels, such as heat resistant, stainless steel, aluminium castors, scene shifters and low level castors, jacking and gate castors. For special application wheels we can offer antistatic, high temperature, wheelchair wheels, trolley wheels, v- grooved and flanged steel wheels. For more information please call: 0116 276 4987
Ross Handling Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
Twin Wheel Castors
Display & PoS Castors
Furniture Castors
Designer Castors
Bolt Hole Castors
Institutional Castors
Light Industrial Castors
Medium Industrial Castors
Medium/Heavy Duty Castors
Anti-Static & High Temp Castors
Stainless Steel Castors
Extra Heavy Duty Castors
Fabricated Castors
Jacking Castors
Gate & Low Level Castors
Special Application Castors
Assorted Wheels
Special Application Wheels
Terms & Conditions
TELEPHONE ORDER LINE 0116 276 4987FAX ORDER LINE 0116 274 1751
Index
World Class Supplier of Castors & Wheels
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20 - 25
26
27
71 Cannock Street Leicester LE4 9HRE-mail: sales@rosshandling.co.uk
www.rosshandling.co.uk
ROSS HANDLING LIMITED
Ross Handling Tel: 01162764987 or Email: sales@rosshandling.co.uk
4 Ross Handling Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
Twin Wheel Castors
TW SeriesAn inexpensive range of black plastic 40mm and 50mm hooded twin wheeled castors. Available with M8 & M10 threaded stems and plate fixings. Suitable for use on light domestic equipment, video stands, office furniture, point of sale and display equipment. All sizes can be supplied with or without footbrakes. The 75mm heavy duty version is unhooded and can be supplied with M10 stems (2 lengths) or with flat top plates.
Wheel Diam.
Threaded Stems Castor Height Load
CapacityUnbraked Reference Braked Reference
40mm M8 x 15mm 52mm 40kg TW4001 M8 x 15 TW4001 M8 x 15/B
40mm M10 x 15mm 52mm 40kg TW4001 M10 x 15 TW4001 M10 x 15/B
50mm M8 x 15mm 64mm 50kg TW5001 M8 x 15 TW5001 M8 x 15/B
50mm M10 x 15mm 64mm 50kg TW5001 M10 x 15 TW5001 M10 x 15/B
75mm M10 x 15mm 81mm 75kg TW7501 M10 x 15 TW7501 M10 x 15/B
75mm M10 x 25mm 81mm 75kg TW7501 M10 x 25 TW7501 M10 x 25/B
Wheel Diam. Plate Size Bolt
Diam.Castor Height
Load Capacity
Unbraked Reference Braked Reference
40mm 38mm x 38mm27mm x 27mm 5mm 54mm 40kg TW4004 TW4004/B
50mm 38mm x 38mm27mm x 27mm 5mm 66mm 50kg TW5004 TW5004/B
75mm 38mm x 38mm27mm x 27mm 5mm 88mm 75kg TW7504 TW7504/B
Wheel Diam. Fixings Castor
HeightLoad
CapacityNylon Wheel Reference
Rubber Wheel Reference
50mm M10 x 30mm 54mm 50kg TW500 M10 CIRCLIP -
50mm M11 x 22mm 57mm 50kg TW500 M11 CIRCLIP -
50mm M10 x 30mm 54mm 50kg - TWR500 M10 CIRCLIP
50mm M11 x 22mm 57mm 50kg - TWR500 M11 CIRCLIP
TW Series (Circlip)
Ideal for office chairs. Available in black nylon or soft grey rubber wheels.
The twin wheeled castors can be supplied complete (as shown) or with loose top plates for ease of fitting.
The twin wheeled castors can be supplied complete (as shown) or with loose threaded stems for ease of fitting. Wood Inserts, Tee-Nuts, Weld-on-Nuts also available as optional extras.
Threaded Stem Fittings
Plate Fitting
5Ross Handling
Display & PoS Castors
FS SeriesA range of light/medium pressed steel swivel castors for use on point of sale, display racks, etc., available with 8mm bolt hole fitting. Can be supplied with black plastic or grey rubber tyred wheels. 10mm bolt hole available to special order. Braked or unbraked.
Wheel Diam. Wheels Overall
HeightLoad
CapacityUnbraked Reference
Braked Reference
50mm Black plastic 70mm 55kg FS-N2013 FS-N2013/BR
50mm *Grey rubber 70mm 50kg FS-P2013 FS-P2013/BR
*The rubber tyred wheels are fitted with threadguards.
FS SeriesSome range as above but fitted with flat top plates. Avaliable with 50mm black plastic or grey rubber wheels. Braked or unbraked.
Wheel Diam. Wheels Overall
HeightLoad Capc.
Plate size / Hole centres
Unbraked Ref. Braked Ref
50mm Black plastic 72mm 55kg 50mm x 50mm
36mm x 36mm FS-N2014 FS-N2014/BR
50mm *Grey rubber 72mm 50kg 50mm x 50mm
36mm x 36mm FS-P2014 FS-P2014/BR
*The rubber tyred wheels are fitted with threadguards. Bolt size: 6mm.
Plate Fitting
360 SeriesSize: 50mm & 75mm
Twin wheeled castors suitable for a wide range of light duty applications. Available with M10 single bolt hole fixings. Braked or unbraked can be fitted with Black Polypropylene or Grey Rubber tyred wheels.
Wheel Diam. Wheels Overall
HeightLoad Capc.
Unbraked Reference
Braked Reference
50mm Black plastic 72mm 60kg 50-360-P-BH10 50-360-P-BH10/SWB
50mm Grey rubber 72mm 60kg 50-360-R-BH10 50-360-R-BH10/SWB
75mm Black plastic 98mm 90kg 75-360-P-BH10 75-360-P-BH10/SWB
75mm Grey rubber 100mm 90kg 75-360-R-BH10 75-360-R-BH10/SWB
Bolt Hole Fitting
360 SeriesSize: 50mm & 75mm
Twin wheeled castors suitable for a wide range of light duty applications. Available with flat top plate fixings. Braked or unbraked can be fitted with Black Polypropylene or Grey Rubber tyred wheels.
Plate size: 60mm x 60mm, centres (48/38mm x 48/38mm)
Wheel Diam. Wheels Overall
HeightLoad Cap.
Unbraked Reference
Braked Reference
50mm Black plastic 72mm 60kg 50-360-P-FP 50-360-P-FP/SWB
50mm Grey rubber 72mm 60kg 50-360-R-FP 50-360-R-FP/SWB
75mm Black plastic 98mm 90kg 75-360-P-FP 75-360-P-FP/SWB
75mm Grey rubber 100mm 90kg 75-360-R-FP 75-360-R-FP/SWB
Plate Fitting
Threadgaurds only to special order, not fitted as standard.
Bolt Hole Fitting
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
6 Ross Handling
Furniture Castors
Type Wheel Diam. Wheels Fittings Overall
Height Capacity Reference
FF 41mm Black Plastic
Wood Socket 52mm 50kg FFK-41
FF 41mm Black Plastic
Round Plastic Sockets for 5/8” 3/4” 1” TubingSquare Plastic Sockets for 3/4/” 1” Tubing
SHEPHERD Series Shepherd Metal ball castors with and without rubber tyres. Available in 50mm and 63mm diameters. The 50mm is suitable for furniture, medium duty office equipment, small trolleys etc. The 63mm is a heavy duty version suitable for display racking, merchandisers, materials handling equipment etc
Wheel Diam.
Threaded Stems
Peg & Socket Top Plates Load
Capc.Peg & Socket Top Plates Threaded
Stems
50mm M-8 9.5 38 x 38(25.4 x 25.4) 50kg No. 46 No. 41 No. 44
63mm M-10 - 38 x 38(25.4 x 25.4) 75kg - No. 52 No. 54
Available in Beige colour. Alternatively in Dark Brown or Bright Nickel to special order.
OVERALL HEIGHTS: 50mm Castors 63mm to 82mm 63mm Castors 75mm to 90mm
Range of Fittings available Castor Reference
No. 1000 3/4” & 1” diameter
No. 1007 1” diameter
No. 1009 3/4” & 1” diameter
Flange fitting where height is restricted. Used for conveyor and transfer tables etc. Self cleaning hole standard. Method of attachment - self tapping screws, pop rivets, nuts and bolts.
Used for conveyor, transfer tables etc. Ball upwards only. Self cleaning hole standard.
Bolt fixing M8 thread. Stock lengths 25mm.
LOAD CAPACITY Diagrams are shown with 1” balls UPWARDS: 3/4” = 23kg 1” = 55kg DOWNWARDS: 3/4” = 10kg 1” = 25kg
Light duty swivel castors suitable for use on point of sale and display equipment. Can be supplied with metal sockets for wood fitting, and round or square plastic sockets for metal tubing.
FF Series
BALL TRANSFERSBall transfer units consist of a large ball seated in a quantity of small bearings in a hemispherical cup. The design allows the ball to rotate freely in any direction. Available in ¾” and 1” diameters.
NOVELTY CASTORSNew range of brightly coloured, novelty swivel castors in 50mm diameters. Ideal for use on playschool equipment. childrens furniture and fun applications. 4 colours are available with or without footbrakes. Can be fitted with threaded stems, circlip or plate fittings. Available to special order only.
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
7Ross Handling
Designer Castors
DS SeriesContemporary range of twin wheeled castors. Silver body with dark grey rubber tyres. Ideal for furniture and point of sale. Available with M.10 stems or Flat Top Plates, with or without footbrakes.
Wheel Diam. Fixings Overall Height Load Capacity
Unbraked Reference Braked Reference
65mm M10 x 15mm 74mm 60kg DS65M10x15 DS65M10x15/B
65mm M10 x 25mm 74mm 60kg DS65M10x25 DS65M10x25/B
65mm 38 x 38mm (27 x 27mm) 79mm 60kg DS654 DS654/B
75mm M10 x 15mm 81mm 75kg DS7501M10x15 DS7501M10x15/B
75mm M10 x 25mm 81mm 75kg DS7501M10x25 DS7501M10x25/B
75mm 38 x 38mm(27 x 27mm) 88mm 75kg DS7504 DS7504/B
BS SeriesElegant modern design castors with metallic silver finish and light grey rubber wheels. Available with M.10 stems or Flat Top Plates, with or without footbrakes.
Wheel Diam. Fixings Overall Height Load Capacity
Unbraked Reference Braked Reference
75mm M10 x 15mm 92mm 100kg BS75M10x15 BS75M10x15/B
75mm M10 x 25mm 92mm 100kg BS75M10x25 BS75M10x25/B
75mm 65 x 65mm(47 x 47mm) 100mm 100kg BS754 BS754/B
ES SeriesNew slimline design castors. Ideal for display and furniture applications. Light grey body with dark grey rubber tyres. Available with M.10 stems or Flat Top Plates, with or without footbrakes.
Wheel Diam. Fixings Overall Height Load Capacity
Unbraked Reference Braked Reference
80mm M10 x 15mm 110mm 60kg ES80M10x15 ES80M10x15/B
80mm M10 x 25mm 110mm 60kg ES80M10x25 ES80M10x25/B
80mm 65 x 65mm(47 x 47mm) 114mm 60kg ES804 ES804/B
100mm M10 x 15mm 126mm 70kg ES100M10x15 ES100M10x15/B
100mm M10 x 25mm 126mm 70kg ES100M10x25 ES100M10x25/B
100mm 65 x 65mm(47 x 47mm) 131mm 70kg ES1004 ES1004/B
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
GS SeriesSynthetic castor, ideal for use as a wheelchair castor or on medical equipment . Light grey body with dark grey non-marking tyres. Available in a 100,125 and 150mm diameter wheel. With either a 12mm bolt hole or plate fitting. With or without footbrakes
Wheel Diam. Fixings Overall Height Load Capacity
Unbraked Reference Braked Reference
100mm M12 B/H 135mm 80Kg GS100M12 GS100M12/BR
100mm 90 X 70mm (70x50mm) 138mm 80Kg GS1004 GS1004/BR
125mm M12 B/H 161mm 100Kg GS125M12 GS125M12
125mm 90 X 70mm (70x50mm) 164mm 100Kg GS1254 GS1254/BR
150mm M12 B/H 189mm 100Kg GS150M12 GS150M12/BR
150mm 90 X 70mm (70x50mm) 192mm 100Kg GS1504 GS1504/BR
8 Ross Handling
Bolt Hole Castors
310 SeriesSize: 50mm, 75mm & 100mm
Light duty pressed steel swivel castors with 10mm bolt holes. Can be fitted with grey non-marking Rubber Tyred or Black Polypropylene wheels. Suitable for a wide range of light duty applications.
Wheel Diam. Tread Width Plated Finish Castor Height Swivel
RadiusSwivel Race
Diam.Bolt
Diameter Grey Rubber Black Polypropylene
2”50mm 22mm Zinc 73mm 45mm 41mm *10mm 50-310-R
60kg50-310-P
65kg
3”75mm **23mm Zinc 101mm 68mm 41mm *10mm 75-310-R
70kg75-310-P
75kg
4”100mm **26mm Zinc 124mm 75mm 41mm *10mm 100-310-R
80kg100-310-P
85kg
An alternative 100mm and 125mm castor is available in a chrome plated finish. Details on request.
* Bolt hole fitting requires a 20mm washer and a 10mm bolt. ** The 3” and 4” Polypropylene wheels have 22mm tread widths.
3” ANTI-STATIC WHEELS AVAILABLE TO SPECIAL ORDER
Castor Reference and Load Capacity
OPTIONAL EXTRASRound Expanding Tubular Adaptor
Expanding adaptors available for round tubing in the following sizes: Overall height of castors increased by 3mm. To order add suffix detailed in table to swivel castor reference.
Square Expanding Tubular Adaptor
Expanding adaptors available for square tubing in the following sizes: Overall height of castors increased by 3mm. To order add suffix detailed in table to swivel castor reference.
Combined Swivel and Wheel Brake (all sizes)
Simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix ‘SWB’ to castor reference. Swivel Radius The swivel radius is increased when brakes are fitted. 50mm wheels: increased by 40mm 75mm wheels: increased by 32mm 100mm wheels: increased by 25mm
Spring Loaded Castors (For Mobile Steps)
Spring fitting for use with a 75mm castor. The standard spring compresses with a load of 26Kg.
Alternative spring strengths can be fitted but the maximum load capacity of the castor is 70Kg.
Expander Range Ref.
18 - 19.5mm R-18
19.5 - 21.7mm R-20
21.7 - 24.5mm R-22
24.5 - 27mm R-25
27mm - 29.5mm R-27
29.5 - 32mm R-30
Expander Range Ref.
20 - 22mm S-20
22 - 25mm S-22
25 - 28mm S-25
29 - 32mm S-29
36 - 38mm S-36
85mm
35mm
29mm
223mm
75mm
21mmtread
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
9Ross Handling
Institutional Castors
314 Seriesize: 50mm, 75mm & 100mm
Light duty pressed steel swivel castors with flat top plates. Available in grey non-marking Rubber Tyred or Black Polypropylene wheels. Suitable for a wide range of light duty applications.
Wheel Diam. Tread Width Plated Finish Castor Height Swivel
Radius Plate Size Bolt Diam. Grey Rubber Black Polypropylene
2”50mm 22mm Zinc 72mm 45mm 60mm x 60mm
48/38 x 48/38 6mm 50-314-R60kg
50-314-P65kg
3”75mm *23mm Zinc 101mm 68mm 60mm x 60mm
48/38 x 48/38 6mm 75-314-R70kg
75-314-P75kg
4”100mm *26mm Zinc 124mm 75mm 60mm x 60mm
48/38 x 48/38 6mm 100-314-R80kg
100-314-P85kg
* The 3” and 4” Polypropylene wheels have 22mm tread widths
3” ANTI-STATIC WHEELS AVAILABLE TO SPECIAL ORDER
Castor Reference and Load Capacity
OPTIONAL EXTRA
Combined Swivel and Wheel Brake (all sizes)
Foot operated wheel brake simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix ‘ SWB ’ to the swivel castor reference.
Swivel Radius
The swivel radius is increased when brakes are fitted.
50mm wheels: increased by 40mm
75mm wheels: increased by 32mm
100mm wheels: increased by 25mm
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
10 Ross Handling
Light Industrial Castors
2260 Series Size: 80mm, 100mm & 125mm.
Double ball bearing swivel castors. Double ball race castors suitable for a wide range of light duty applications.Available with white nylon, grey non marking or black rubber tyred wheels.
Wheel Diam.
Tread Width Type Castor
Height Plate size Bolt hole spacing
Bolt Diam
Swivel Rad. White Nylon Grey Rubber Black Rubber
3" + 80mm *30mm Swivel 107mm 99 x 80mm 80 x 60mm 8mm 70mm 80-2260-NV
100kg80-2260-GV
50kg80-2260-PV
50kg
4”100mm *30mm Swivel 127mm 99 x 80mm 80 x 60mm 8mm 80mm 100-2260-NV
120kg100-2260-GV
70kg100-2260-PV
70kg
5” 125mm *39mm Swivel 155mm 99 x 80mm 80 x 60mm 8mm 100mm 125-2260-NV
150kg125-2260-GV
100kg125-2260-PV
100kg
*The tread shown is for nylon wheels. Rubber tyred wheels will be narrower as follows: 80mm = 23mm, 100mm = 23mm, 125mm = 26mm
Castor Reference and Load Capacity
2268 Series Size: 80mm, 100mm & 125mm.
Fixed castors suitable for a wide range of light duty applications. Available with white nylon, grey non marking or black rubber tyred wheels.
Wheel Diam.
Tread Width
Castor Type
Castor Height Plate size Bolt hole
spacingBolt
Diam White Nylon Grey Rubber Black Rubber
3" + 80mm *30mm Fixed 107mm 100 x 84mm 80 x 60mm 8mm 80-2268-NV
100kg80-2268-GV
50kg80-2268-PV
50kg
4”100mm *30mm Fixed 127mm 100 x 84mm 80 x 60mm 8mm 100-2268-NV
120kg100-2268-GV
70kg100-2268-PV
70kg
5” 125mm *39mm Fixed 155mm 100 x 84mm 80 x 60mm 8mm 125-2268-NV
150kg125-2268-GV
100kg125-2268-PV
100kg
*The thread shown is for nylon wheels. Rubber tyred wheels will be narrower as follows: 80mm = 23mm, 100mm = 23mm, 125mm = 26mm
Castor Reference and Load Capacity
OPTIONAL EXTRA
Combined Swivel and Wheel Brake (all sizes)
Foot operated wheel brake simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix ‘ SWB ’ to the swivel castor reference.
Swivel Radius
The swivel radius is increased when brakes are fitted.
80mm wheels: increased by 45mm
100mm wheels: increased by 40mm
125mm wheels: increased by 30mm
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
11Ross Handling
Medium Industrial Castors
4000 SeriesSize: 80mm, 100mm, 125mm & 160mm
Double Ball Bearing Swivel Castors.
The latest addition to the pressed steel range. The castors are suitable for use on trolleys, roll pallets, display racks and general purpose equipment. Available with rubber, polyurethane or nylon wheels.
Wheel Diam.
Tread Width
Castor Height
Sw'l Race Diam.
Bolt Diam.
Swivel Radius
Blue Rubber
Black Rubber
Grey Rubber
Polyure -thane White Nylon Anti Static
3” + 80mm
RN=36mmPV=22mmGV=22mmPN=38mmNY=30mm
108mm 65mm *12mm 70mm 80-4000-RNB100kg
80-4000-PV70kg
80-4000-GV70kg
80-4000-PNB100kg
**
80-4000-NY100kg -
4”100mm
RN=29mmPV=22mmGV=22mmPN=30mmNY=30mmAS=22mm
128mm 65mm *12mm 80mm 100-4000-RNB120kg
100-4000-PV80kg
100-4000-GV80kg
100-4000-PNB120kg
100-4000-NY120kg
100-4000-ASR70kg
5”125mm
RN=34mmPV=27mmGV=27mmPN=30mmNY=38mmAS=27mm
157mm 73mm *12mm 100mm 125-4000-RNB150kg
125-4000-PV100kg
125-4000-GV100kg
125-4000-PNB150kg
125-4000-NY150kg
125-4000-ASR100kg
6” + 160mm
RN=40mmPV=25mmGV=25mmPN=40mmNY=40mmAS=24mm
195mm - *12mm 135mm 160-4000-RNB200kg
160-4000-PVR135kg
160-4000-GVR135kg
160-4000-PNB200kg
160-4000-NYB200kg
160-4000-ASR135kg
*We also offer loose fitted reducing bushes to give a 10mm bolt diameter. **80mm wheel is grey on grey
Castor Reference and Load Capacity
OPTIONAL EXTRASRound Expanding Tubular Adaptor
Expanding adaptors available for round tubing in the following sizes: Overall height of castors increased by 3mm. To order add suffix detailed in table to castor references.
Square Expanding Tubular Adaptor
Expanding adaptors available for square tubing in the following sizes: Overall height of castors increased by 3mm. To order add suffix detailed in table to castor references.
Combined Swivel and Wheel Brake (all sizes)Simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix ‘SWB’ to castor reference. Swivel Radius The swivel radius is increased when brakes are fitted. 80mm wheels: increased by 45mm 100mm wheels: increased by 40mm 125mm wheels: increased by 30mm 160mm wheels: increased by 32mm
Expander Range Ref.
18 - 19.5mm R-18
19.5 - 21.7mm R-20
21.7 - 24.5mm R-22
24.5 - 27mm R-25
27 - 29.5mm R-27
29.5 - 32mm R-30
Expander Range Ref.
20 - 22mm S-20
22 - 25mm S-22
25 - 28mm S-25
29 - 32mm S-29
36 - 38mm S-36
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
12 Ross Handling
Medium/Heavy Duty Castors
3360 Series (Swivel)Size: 80mm, 100mm, 125mm, 160mm & 200mm
Wheel Diam.
Tread width(mm)
Castor Type
Castor Height
Plate size
Bolt Hole
spacin'Swiv. Rad.
Blue Rubber
Grey Rubber
Black Rubber
Polyure -thane
PB WhiteNylon
RB WhiteNylon
3” + 80mm
RN=36GV=27PV=27PN=38NY=34
Swivel 108mm 105 x85mm
80 x60mm 75mm 80-3360-RNB
90kg80-3360-GVR
70kg80-3360-PVR
70kg*80-3360-PNB
150kg80-3360-NY
150kg -
Fixed 108mm 99 x85mm
80 x60mm - 80-3368-RNB
90kg80-3368-GVR
70kg80-3368-PVR
70kg*80-3368-PNB
150kg80-3368-NY
150kg -
4” 100mm
RN=29GV=23PV=23PN=30NY=34
Swivel 128mm 105 x85mm
80 x60mm 85mm 100-3360-RNB
160kg100-3360-GVR
80kg100-3360-PVR
80kg100-3360-PNB
200kg - 100-3360-NYB 200kg
Fixed 128mm 101 x85mm
80 x60mm - 100-3368-RNB
160kg100-3368-GVR
80kg100-3368-PVR
80kg100-3368-PNB
200kg - 100-3368-NYB 200kg
5” 125mm
RN=34GV=23PV=23PN=30NY=38
Swivel 155mm 105 x85mm
80 x60mm 105mm 125-3360-RNB
180kg125-3360-GVR
100kg125-3360-PVR
100kg125-3360-PNB
250kg - 125-3360-NYB 300kg
Fixed 155mm 101 x85mm
80 x60mm - 125-3368-RNB
180kg125-3368-GVR
100kg125-3368-PVR
100kg125-3368-PNB
250kg - 125-3368-NYB 300kg
6” + 160mm
RN=40GV=25PV=25PN=40NY=40
Swivel 200mm 137 x105mm
105 x80mm 140mm 160-3360-RNB
300kg160-3360-GVR
150kg160-3360-PVR
150kg160-3360-PNB
300kg160-3360-NY
350kg160-3360-NYB
350kg
Fixed 200mm 137 x115mm
105x80mm - 160-3368-RNB
300kg160-3368-GVR
150kg160-3368-PVR
150kg160-3368-PNB
300kg160-3368-NY
350kg160-3368-NYB
350kg
8” 200mm
RN=40GV=33PV=33PN=50NY=46
Swivel 240mm 137 x105mm
105x80mm 165mm 200-3360-RNB
400kg200-3360-GVR
200kg200-3360-PVR
200kg200-3360-PNB
400kg200-3360-NY
400kg200-3360-NYB
400kg
Fixed 240mm 137 x115mm
105 x80mm - 200-3368-RNB
400kg200-3368-GVR
200kg200-3368-PVR
200kg200-3368-PNB
400kg200-3368-NY
400kg200-3368-NYB
400kg
*The 80mm Polyurethane wheel is grey on grey.
Castor Reference and Load Capacity
3368 Series (Fixed)Size: 80mm, 100mm, 125mm, 160mm & 200mm
Double Ball Bearing Swivel & Fixed Castors. The castors are suitable for use on trolleys, roll pallets, display racks and general purpose equipment where good manoeuvrability and easy rolling is required together with high strength. Available with rubber, polyurethane or nylon wheels. 8mm bolt diameter for 3”, 4” and 5” castors. The 6” and 8” castors have 10mm bolt diameters
OPTIONAL EXTRAS
Combined Swivel and Wheel Brake (all sizes)
Foot operated wheel brake simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix SWB’ to the swivel castor reference. Swivel Radius The swivel radius is increased when brakes are fitted. 80mm wheels: increased by 45mm 100mm wheels: increased by 40mm 125mm wheels: increased by 30mm 160mm wheels: increased by 30mm 200mm wheels: increased by 20mm
Directional Swivel Locks
Loose fitted (unassembled) directional swivel locks available on 6” and 8” castors.
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
13Ross Handling
Anti-Static & High Temp. Castors
Wheel Diam.
Tread Width
Castor Type
Castor Height Plate Size Bolt Hole
SpacingBolt
Diam. Swiv. Rad. Anti Static Rubber
High Temp. Phenolic
High Temp.Rubber
3” + 80mm TH=35mm
Swivel 108mm 105 x 85mm 80 x 60mm 8mm 75mm - 80-3360-TH100kg -
Fixed 108mm 99 x 85mm 80 x 60mm 8mm - - 80-3368-TH100kg -
4” 100mm
AS=22mmTH=35mmHT=34mm
Swivel 128mm 105 x 85mm 80 x 60mm 8mm 85mm 100-3360-ASR70kg
100-3360-TH125kg
100-3360-HT60kg
Fixed 128mm 101 x 85mm 80 x 60mm 8mm - 100-3368-ASR70kg
100-3368-TH125kg
100-3368-HT60kg
5” 125mm
AS=27mm TH=35mm
Swivel 155mm 105 x 85mm 80 x 60mm 8mm 105mm 125-3360-ASR100kg
125-3360-TH150kg -
Fixed 155mm 101 x 85mm 80 x 60mm 8mm - 125-3368-ASR100kg
125-3368-TH150kg -
6” + 160mm
AS=24mmTH=40mm
Swivel 200mm 137 x 105mm 105 x 80mm 10mm 140mm 160-3360-ASR135kg
160-3360-TH250kg -
Fixed 200mm 137 x 115mm 105 x 80mm 10mm - 160-3368-ASR135kg
160-3368-TH250kg -
8” 200mm
AS=30mmTH=50mm
Swivel 240mm 137 x 105mm 105 x 80mm 10mm 165mm 200-3360-ASR205kg
200-3360-TH300kg -
Fixed 240mm 137 x 115mm 105 x 80mm 10mm - 200-3368-ASR205kg
200-3368-TH300kg -
Castor Reference and Load Capacity
Anti-Static Castors & High temperature CastorsA range of anti-static (electrically conductive) and high temperature castors. The anti-static wheels are pressed steel centres with black rubber tyres. The wheels are phenolic resin and high temperature rubber and have a range from -40°C to +280°C. Both ranges are available with and without brakes.
OPTIONAL EXTRACombined Swivel and Wheel Brake (all sizes)Foot operated wheel brake simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix ‘SWB’ to the swivel castor reference.
Swivel Radius The swivel radius is increased when brakes are fitted. 80mm wheels: increased by 45mm 100mm wheels: increased by 40mm 125mm wheels: increased by 30mm 160mm wheels: increased by 30mm 200mm wheels: increased by 20mm
Pneumatic Tyred Swivel CastorsSwivel and Fixed Pneumatic tyred castors. Availabe in 8” and 10” diameters. Ideal for cushioning sensitive loads. The 10” wheel is used on cricket wicket covers as the wide tread prevents damage to the playing surface. Black tyres on grey metal centres.
Wheel Diam.
Tread Width
Castor Type
Castor Height Plate Size Bolt Hole
SpacingBolt
Diam.Swiv. Rad. 8" Ref. 10" Ref.
8” 200mm48mm
Swivel 240mm 137 x 105mm 105 x 80mm 10mm 165mm 200-3360-PWR75kg -
8” 200mm Fixed 240mm 140 x 115mm 105 x 80mm 10mm - 200-3368-PWR75kg -
10” 260mm85mm
Swivel 302mm 200 x 160mm 105 x 115mm 12mm 215mm - 260-3360-PWR200kg
10” 260mm Fixed 302mm 200 x 160mm 105 x 115mm 12mm - - 260-3368-PWR200kg
Castor Reference and Load Capacity
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
14 Ross Handling
Stainless Steel Castors
SS Series Stainless Steel Swivel Castors
Size: 80mm, 100mm, 125mm, 160mm & 200mm
Wheel Diam.
Tread width(mm)
Castor Type
Castor Height
Plate size
(mm)
Bolt Hole spacing
(mm)Bolt
Diam.Swiv. Rad.
Grey Rubber
Polyur-ethane
WhiteNylon
High Temp Termotex
High Temp Rubber
3” + 80mm
GV=27PN=38NY=34TH=35
Swivel 108mm 105 x 85 80 x 60 8mm 75mm SS-80-GVR 70kg
*SS-80-PNB 100kg
SS-80-NY 100kg
SS-80-TH 100kg -
Fixed 108mm 99 x 85 80 x 60 8mm - SF-80-GVR 70kg
*SF-80-PNB 100kg
SF-80-NY 100kg
SF-80-TH 100kg -
4” 100mm
GV=23PN=30NY=34TH=35HT=34
Swivel 128mm 105 x 85 80 x 60 8mm 85mm SS-100-GVR 80kg
SS-100-PNB 150kg
SS-100-NY 150kg
SS-100-TH 125kg
SS-100-HT 60kg
Fixed 128mm 101 x 85 80 x 60 8mm - SF-100-GVR 80kg
SF-100-PNB 150kg
SF-100-NY 150kg
SF-100-TH 125kg
SF-100-HT 60kg
5” 125mm
GV=23PN=30NY=38TH=35
Swivel 155mm 105 x 85 80 x 60 8mm 105mm SS-125-GVR 100kg
SS-125-PNB 300kg
SS-125-NY 300kg
SS-125-TH 150kg -
Fixed 155mm 101 x 85 80 x 60 8mm - SF-125-GVR 100kg
SF-125-PNB 300kg
SF-125-NY 300kg
SF-125-TH 150kg -
6” + 160mm
PN=40NY=40TH=40
Swivel 196mm 140 x 110 105 x 80/75 10mm 140mm - SS-160-PNB 350kg
SS-160-NY 350kg
SS-160-TH 250kg -
Fixed 196mm 140 x 110 105 x 80/75 10mm - - SF-160-PNB 350kg
SF-160-NY 350kg
SF-160-TH 250kg -
8” 200mm
PN=50NY=46TH=40
Swivel 236mm 140 x 110 105 x 80/75 10mm 165mm - SS-200-PNB 400kg
SS-200-NY 400kg
SS-200-TH 300kg -
Fixed 236mm 140 x 110 105 x 80/75 10mm - - SF-200-PNB 400kg
SF-200-NY 400kg
SF-200-TH 300kg -
*The 80mm Polyurethane wheel is grey on grey.
Castor Reference and Load Capacity
SF Series Stainless Steel Fixed Castors
Size: 80mm, 100mm, 125mm, 160mm & 200mm
STAINLESS STEEL SWIVEL & FIXED CASTORS have been introduced to cater for the increased demand in the food processing, institutional and hospital equipment industries. Bolt hole fitting also available on 80mm, 100mm, 125mm and 160mm wheel diameters.
OPTIONAL EXTRACombined Swivel and Wheel Brake (all sizes)
Foot operated wheel brake simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix ‘SWB’ to the swivel castor reference. Swivel Radius The swivel radius is increased when brakes are fitted. 80mm wheels: increased by 45mm 100mm wheels: increased by 40mm 125mm wheels: increased by 30mm 160mm wheels: increased by 30mm 200mm wheels: increased by 30mm Bolt hole fitting M12 bolt hole fitting also available in 80mm, 100mm, 125mm and 160mm wheel diameters.
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
Size: 80mm, 100mm, 125mm, 160mm & 200mm
15Ross Handling
Extra Heavy Duty Castors
5000 Series (Swivel)Size: 160mm & 200mm
Wheel Diam.
Tread width(mm)
Castor Type
Castor Height
Plate size
(mm)
Bolt Hole spacin' (mm)
Bolt Diam.
Swiv. Rad. Rubber Polyur-
ethaneWhiteNylon Cast Iron
5” 125mm
HRT=50SUB=50NYB=50
Swivel 164mm 140 x 110 105 x 80/75 10mm 118mm 125-5000- HRT 300kg
125-5000-SUB 550kg
125-5000-NYB 700kg -
Fixed 164mm 140 x 110 105 x 80/75 10mm - 125-5050- HRT 300kg
125-5050-SUB 550kg
125-5050-NYB 700kg -
6” + 160mm
HRT=50SUB=50
NYB=50CIB=45
Swivel *200mm 140 x 110 105 x 80/75 10mm 135mm 160-5000- HRT 400kg
160-5000-SUB 700kg
160-5000-NYB 700kg
150-5000-CIB 700kg
Fixed *200mm 140 x 110 105 x 80/75 10mm - 160-5050- HRT 400kg
160-5050-SUB 700kg
160-5050-NYB 700kg
150-5050-CIB 700kg
8” 200mm
HRT=50SUB=50
NYB=50CIB=45
Swivel 240mm 140x 110 105 x 80/75 10mm 155mm 200-5000- HRT 500kg
200-5000-SUB 800kg
200-5000-NYB 800kg
200-5000-CIB 800kg
Fixed 240mm 140 x 110 105 x 80/75 10mm - 200-5050- HRT 500kg
200-5050-SUB 800kg
200-5050-NYB 800kg
200-5050-CIB 800kg
*When the 6” cast iron wheels are used, the castor height is reduced by 10mm.
Castor Reference and Load Capacity
5050 Series (Fixed)Size: 160mm & 200mm Very heavy duty swivel and fixed castors. Suitable for a wide range of industrial applications. Available with rubber, polyurethane, nylon and cast iron wheels.
OPTIONAL EXTRAS
Combined Swivel and Wheel Brake
Foot operated wheel brake simultaneously brakes both the swivel head and wheel. Release is affected by the trip pedal. To order add suffix ‘SWB’ to the swivel castor reference. Swivel Radius The swivel radius is increased when brakes are fitted. 125mm wheels: increased by 30mm 160mm wheels: increased by 15mm The 6” cast iron wheels are not available with brakes.
TLCH Truck Locks
Top plate fittingThe TLCH truck lock is designed to bolt to the underside of the truck and should be mounted with its top face 200mm above the ground surface.
Plate size Bolt Hole Spacing
Bolt Diam.
Overall height - free position
Overall height - pad extended
152 x 114mm 127 x 63.5mm 12mm 163.5mm 208mm
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
16 Ross Handling
Fabricated Castors
6000 Series (Swivel)Size: 100mm, 125mm, 160mm, 200mm & 250mm
Wheel Diam.
Tread width(mm)
Castor Type
Castor Height Plate size
Bolt Hole spacin' (mm)
Bolt Diam. Swiv. Rad. Cast Iron Polyurethane
4”100mm
CI=45SUB=50
Swivel 145mm 135 x 110mm 105 x 80/75mm 10mm 92mm TSH-100-CI1H320kg
100-6000-SUB450kg
Fixed 145mm 135 x 110mm 105 x 80/75mm 10mm - TFH-100-CI1H320kg
100-6050-SUB450kg
5”125mm
CI=45SUB=50
Swivel 170mm 135 x 110mm 105 x 80/75mm 10mm 110mm TSH-125-CI1H630kg
125-6000-SUB550kg
Fixed 170mm 135 x 110mm 105 x 80/75mm 10mm - TFH-125-CI1H630kg
125-6050-SUB550kg
6”160mm 60mm
Swivel 205mm 135 x 110mm 105 x 80/75mm 11mm 137mm - 160-6000-SUB860kg
Fixed 205mm 135 x 110mm 105 x 80/75mm 11mm - - 160-6050-SUB860kg
8”200mm 60mm
Swivel 245mm 135 x 110mm 105 x 80/75mm 11mm 166mm - 200-6000-SUB1200kg
Fixed 245mm 135 x 110mm 105 x 80/75mm 11mm - - 200-6050-SUB1200kg
10”250mm 80mm
Swivel 305mm 200 x 160mm 160 x 120mm 14mm 199mm - 250-6000-SUB1700kg
Fixed 305mm 200 x 160mm 160 x 120mm 14mm - - 250-6050-SUB170kg
Castor Reference and Load Capacity
6050 Series (Fixed)Size: 100mm, 125mm, 160mm, 200mm & 250mm Extremely heavy duty fabricated swivel & fixed castors. Precision bearings in swivel head and wheel on 160mm, 200mm and 250mm diameters. Available with cast iron or polyurethane wheels.
OPTIONAL EXTRA
Combined Swivel and Wheel Brake
Available on 125mm, 160mm, 200mm and 250mm sizes.Foot operated brake simultaneously brakes both wheel and swivel head. To order add suffix ‘SWB’ to castor reference. Swivel Radius The swivel radius is increased when brakes are fitted. 125mm wheels: increased by 40mm 160mm wheels: increased by 20mm 200mm wheels: increased by 20mm 250mm wheels: increased by 20mm
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
Size: 100mm, 125mm, 160mm, 200mm & 250mm
Size: 100mm, 125mm, 160mm, 200mm & 250mm Extremely heavy duty fabricated swivel & fixed castors. Precision bearings in swivel head and wheel on 160mm, 200mm and 250mm diameters. Available with cast iron or polyurethane wheels.
17Ross Handling
Jacking Castors
Wheel Diam.
Swiv.Rad.
Tread Width
Load Capacity Wheel Type Bearing
Type Castor Ref
4”100 mm 91 mm
35mm29mm35mm38mm
135kg225kg225kg225kg
Rubber TyredPolyurethane
NylonCast Iron
Plain Plain Plain Plain
JA4-100-RU04JA4-100-PT04JA4-100-NY04JA4-100-CI04
5”125 mm 105 mm
38mm32mm35mm38mm
160kg225kg225kg225kg
Rubber TyredPolyurethane
NylonCast Iron
Plain Plain Plain Plain
JA5-125-RU04JA5-125-PT04JA5-125-NY04JA5-125-CI04
Medium Duty Jacking Castors with 76mm liftAvailable with 4” and 5” wheels in nylon, rubber, cast iron and polyurethane.
Optional extras: Wheel and swivel lock. The foot pedal clamps a spring across the wheel and swivel and effectively locks them both. To order add suffix ‘L’ to reference (swivel radius increased by 40mm).
6”150 45mm 556mm 291mm 135mm Roller JA-6RTB
400/370kgJA-6SUB
725/630kgJA-6CIB
1020/680kg
8”200
51mmCI=45
mm607mm 342mm 160mm Roller JA-8RTB
585/535kgJA-8SUB
1045/725kgJA-8CIB
1090/725kg
Heavy Duty Jacking Castors with 76mm lift
Wheel Diam.
Tread Width
Swivel Radius
Wheel Bearing
Type Rubber Polyurethane Cast Iron
Castor Reference and Load Capacity
Footmaster CastorFootmaster multifunctional castors allow users to move and position large equipment single handedly. Light, Medium and heavy duty versions available.
Load capacity from 50kg to 1500kg.
Ask our sales office for details.
C D
Available with 6” and 8” rubber tyred, polyurethane and cast iron wheels.
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
18 Ross Handling
Gate & Low Level Castors
Gate CastorsHeavy duty 4” fixed castor is designed to help support a gate where either end of a gate needs support and/or there is some variation in level of ground (3” maximum compression of spring with 70kg force). Consideration therefore needs to be given as to the location of this castor on the gate. Fixing via 2 x 10mm holes. Fitted with rubber tyred, roller bearing wheels.
Heavy Duty Light Duty The light duty swivel version is 280mm overall height with a 100mm fixing plate and 60mm centres. Fitted with 4” rubber tyred wheels
having a load capacity of 60kg.
Scene Shifter - Industrial SkatesRange of scene shifters and industrial skates for low level movement. Available from 35mm to 125mm wheel diameters. Ideal for moving scenery. Load capacity 300kg to 500kg.
Appliance RollersEasily move refrigerators, and other heavy domestic appliances. Not recommended for cushioned vinyl floors and hardwood floors. 420mm x 80mm extendable to 640mm. Overall height: 38mm Load capacity: 200kg (Per pair)
Wheel Diam.
Overall Height
Swivel Radius
Tread Width
Load Capacity Wheel Type Castor Ref
2”50mm 64mm 50mm 14mm
160kg270kg160kg
Twin PolyurethaneTwiin SteelTwin Nylon
2SL 050 PTOL2SL 050 STOL2SL 050 NYOL
50mm Twin Low Level CastorsTwin wheel castors are only 64mm overall height with twin 50mm wheels. On a smooth hard floor these castors are able to carry up to 270kg per castor. Suitable for use on concert grand piano-fortes, fire proof filing cabinets, safes and other such heavy equipment. Available with twin steel, polyurethane or nylon wheels.
100
85
40
375
41
885 159
8
Type A Elevation
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
19Ross Handling
Special Application Castors
Glass Handling Scaffolding Stair Climber
Twin Wheeled Puncture Proof Shock Absorbing
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
20 Ross Handling
Pneumatic & Trolley Wheels
Wheel Diameter
Tread Width
Load Cap.
Hub Length
Hub Bore
Reference Plain
6" (150mm) 39mm 30kg 38mm 1/2" PD-6
7" (180mm) 45mm 50kg 38mm 1/2" PD-7
8" (200mm) 45mm 50kg 38mm 1/2" PD-8
“Light duty wheels - tough moulded polypropylene centres fitted with ribbed tyres. PD range is specially designed for grass cutting machines and other light horticultural applications.”
PD Series
Wheel Diameter
Tread Width
Load Cap.
Hub Length
Hub Bore
Reference Plain
80mm 21mm 30kg 37mm 8mm A-80100mm 24mm 35kg 35mm 10mm A-100125mm 31mm 50kg 44mm 15mm A-125160mm 40mm 100kg 44mm 20mm AB-160200mm 33mm 130kg 44mm 20mm AB-200L
“Traditional light industrial range of wheels. The centres are black polypropylene with black rubber tyres.”
ABC Series
Wheel Diameter
Tread Width
Load Cap.
Hub Length
Hub Bore
Reference Plain
6" (160mm) 30mm 150kg 51mm 3/4" EPR-6 (3/4")
6" (160mm) 30mm 150kg 51mm 1" EPR-6 (1")
8" (200mm) 30mm 200kg 51mm 3/4" EPR-8 (3/4")
8" (200mm) 30mm 200kg 51mm 1" EPR-8 (1")
10" (250mm) 60mm 275kg 51mm 1" EPR-10 (1")
11" (270mm) 60mm 150kg 59mm 1" EPR-11 (1")
“Light industrial range of cushion tyred wheels having red centres with black tyres. Ideally suited for sack trucks and trolleys etc. Alternative diameters and hub bores available.” We can produce bushes for the hub bore, which will reduce the bore size to: 1/2” or 20mm. The hub lengths will then be increased by 8mm and the load capacity reduced by 50%.
EPR Series
Wheel Diameter
Tread Width
Load Cap.
Hub Length
Hub Bore
Reference Plain
10 5/8" (270mm) 98mm 125kg 56mm 1" GB-270 (1")
GB Series (Sandhopper)“Extra wide tread wheels.Suitable for barrows, launching trolleys and any outdoor application.” We can produce bushes for the hub bore, which will reduce the bore size to: 1/2” or 20mm. The hub lengths will then be increased by 8mm and the load capacity reduced by 50%.
Wheel Diameter
Tread Width
Load Cap.
Hub Length
Hub Bore Wheel Reference
8 3/4" (220mm) 65mm 100kg 76mm 1"PB PW-250-4-25.4-76
10 1/4" (260mm) 85mm 120kg 76mm 1"PB PW-300-4-25.4-76
10 1/4" (260mm) 85mm 120kg 76mm 1"RB PWR-300-4-25.4-76
16" (400mm) 100mm 150kg 68mm 1"PB PW-400-8-25.4-68
16" (400mm) 100mm 150kg 75mm 1"RB PWR-400-8-25.4-75
PW Series (Plastic Centres) “Pneumatic tyred wheels suitable for low speed applications. Red centres with black tyres 4 ply rating.” We can produce bushes for the hub bore, which will reduce the bore size to: 1/2” or 20mm. The hub lengths will then be increased by 8mm and the load capacity reduced by 50%.“Puncture proof” tyres available to special order with and
without roller bearing centres.
Wheel Diameter
Tread Width
Load Cap.
Hub Length
Hub Bore
Reference Plain
8" (200mm) 48mm 75kg 60mm 20mm WAT-8RBM20
10 1/4" (260mm) 85mm 200kg 76mm 20mm PWMR-300-4-20-76
10 1/4" (260mm) 85mm 200kg 76mm 1"RB PWMR-300-4-25.4-76
*16" (400mm) 100mm 250kg 76mm 1"RB PWMR-400-8-25.4-76
PW Series (Metal Centres)
* The 16” diameter wheel has a red metal centre and is also available in black to special order.
“Pneumatic tyred wheels suitable for low speed applications. Grey Metal centres with black tyres 4 ply rating.”
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
Pneumatic & Trolley Wheels
21Ross Handling
Plastic & Nylon Wheels
Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Reference
Plain
2" 50mm 22mm 70kg 28mm 8mm 50-PL
3" 75mm 22mm 80kg 29mm 8mm 75-PL
4" 100mm 22mm 90kg 30mm 8mm 100-PL
PL Series Light Duty Plastic Wheels Finish: Black
Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Reference
Plain
2" 50mm 22mm 60kg 27.5mm 8mm 50-RP
3" 75mm 23mm 70kg 28mm 8mm 75-RP
4" 100mm 26mm 80kg 30mm 8mm 100-RP
RP Series Light Duty Grey Rubber Tyred Wheels Finish: Grey/Grey
Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Reference
Plain
3" + 80mm 30mm 100kg 39mm 12mm 80-NV
4" 100mm 30mm 130kg 39mm 12mm 100-NV
5" 125mm 38mm 200kg 44mm 15mm 125-NV
NV Series Medium Duty Nylon Wheels Finish: White
Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Reference
Plain
3" + 80mm 22mm 70kg 39mm 12mm 80-PV
4" 100mm 22mm 80kg 39mm 12mm 100-PV
5" 125mm 27mm 100kg 44mm 15mm 125-PV
PV Series Medium Duty Rubber Tyred Wheels Finish: Black/Black
Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Reference
Plain
3" + 80mm 22mm 70kg 39mm 12mm 80-GV
4" 100mm 22mm 80kg 39mm 12mm 100-GV
5" 125mm 27mm 100kg 44mm 15mm 125-GV
GV Series Medium Duty (non-marking) Rubber Tyred Wheels Finish: Grey/Black
Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Wheel
Reference
6" 150mm 30mm 60kg 36mm 8mm RJP-150
8" 200mm 30mm 70kg 53mm 8mm RJP-200
24" 610mm 28mm 50kg 56mm 12mm RQP-610
RJ SeriesMedium Duty (non-marking) Rubber Tyred Wheelchair Wheels fitted with ball journal bearings. The 24” is also available with synthetic or polyurethane tyres.
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
22 Ross Handling
Rubber & High Temp. Wheels
Wheel Diam.
Tread Width
Load Cap.
Hub Length Hub Bore Ref. Plain Ref. Roller
3" + 80mm 27mm 70kg 45mm 12-20mm 80-PVP-20mm 80-PVR-12mm
4" 100mm 23mm 80kg 45mm 12-20mm 100-PVP-20mm 100-PVR-12mm
5" 125mm 23mm 100kg 45mm 12-20mm 125-PVP-20mm 125-PVR-12mm
6" + 160mm 25mm 150kg 58mm 15-23mm 160-PVP-23mm 160-PVR-15mm
8" 200mm 33mm 200kg 58mm 15-23mm 200-PVP-23mm 200-PVR-15mm
PVR Series Medium/Heavy Duty Rubber Tyred Wheels Finish: Black/Black, Red centres on 6” and 8”
Wheel Diam.
Tread Width
Load Cap.
Hub Length Hub Bore Ref. Plain Ref. Roller
3" + 80mm 27mm 70kg 45mm 12-20mm 80-GVP-20mm 80-GVR-12mm
4" 100mm 23mm 80kg 45mm 12-20mm 100-GVP-20mm 100-GVR-12mm
5" 125mm 23mm 100kg 45mm 12-20mm 125-GVP-20mm 125-GVR-12mm
6" + 160mm 25mm 150kg 58mm 15-23mm 160-GVP-23mm 160-GVR-15mm
8" 200mm 33mm 200kg 58mm 15-23mm 200-GVP-23mm 200-GVR-15mm
GVR Series Medium/Heavy Duty (non-marking) Rubber Tyred wheels Finish: Grey/Black
Wheel Diam.
Tread Width
Load Cap.
Hub Length Hub Bore Ref. Plain Ref. Roller
3" + 80mm 36mm 150kg 40mm 12mm - 80-RNB
4" 100mm 29mm 200kg 44mm 12mm - 100 RNB
5" 125mm 34mm 250kg 44mm 12mm - 125 RNB
6" + 160mm 40mm 350kg 60mm 20mm - 160 RNB
8" 200mm 40mm 400kg 60mm 20mm - *200 RNB
RN Series Heavy Duty Blue Elastic Rubber Tyred Wheels Finish: Blue/Black
Wheel Diam. Tread Width Load Cap. Hub Length Hub Bore Ref. Plain
3" + 80mm 35mm 100kg 40mm 12mm 80-TH
4" 100mm 35mm 125kg 40mm 12mm 100-TH
5" 125mm 35mm 150kg 40mm 12mm 125-TH
6" + 160mm 40mm 250kg 58mm 20mm 160-TH
8" 200mm 50mm 300kg 58mm 20mm 200-TH
TH Series Heavy Duty phenolic resin, high temperature wheels. Temp range from: -40°C + 280°C Finish: Black
Wheel Diam. Tread Width Load Cap. Hub Length Hub Bore BallBearing
4" 100mm 34mm 60kg 38mm 12mm 100-HT
HT Series Heat Resisting Rubber Wheel. Fitted with precision ball bearings. Temp range from: -30°C + 260°C Finish: Red/Silver
The 8” diameter wheels are fitted with ball journals
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
Rubber & High Temp. Wheels
23Ross Handling
Polyurethane Wheels
Wheel Diam.
Tread Width
Load Cap.
Hub Length Hub Bore Ref. Plain Ref. Roller
3" + 80mm 34mm 150kg 44mm 12mm 80-NY-12mm 80-NYB-12mm
4" 100mm 34mm 200kg 44mm 12-20mm 100-NY-20mm 100-NYB-12mm
5" 125mm 38mm 300kg 44mm 12-20mm 125-NY-20mm 125-NYB-12mm
6" + 160mm 40mm 350kg 58mm 20mm 160-NY-20mm 160-NYB-20mm
8" 200mm 46mm 400kg 58mm 15-20mm 200-NY-20mm 200-NYB-15mm
8" 200mm 38mm 450kg 60mm 25.4mm (1") WNY-8L -
NY Series Heavy Duty Nylon Wheels Finish: White
Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Ref. Ball
Journal
5" 125mm 50mm 700kg 60mm 20mm 125-HNYB
6" + 160mm 50mm 700kg 60mm 20mm 160-HNYB
8" 200mm 50mm 800kg 60mm 20mm 200-HNYB
HNY Series Extra Heavy Duty Nylon Wheels Finish: White
Wheel Diam.
Tread Width
Load Cap.
Hub Length Hub Bore Ref. Plain Ref. Roller
3" + 80mm 38mm 150kg 44mm 12mm-20mm 80-PN-20mm 80-PNB-12mm
4" 100mm 30mm 150kg 44mm 12mm-20mm 100-PN-20mm 100-PNB-12mm
5" 125mm 30mm 200kg 44mm 12mm-20mm 125-PN-20mm 125-PNB-12mm
6" + 160mm 40mm 400kg 59mm 20mm - 160-PNB-20mm
8" 200mm 50mm 500kg 59mm 20mm - 200-PNB-20mm
PN SeriesHeavy Duty Polyurethane Tyred Wheels on nylon centres Finish: Maroon/White (3” Grey on Grey)
Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Ref. Ball
Journal
4" 100mm 50mm 450kg 60mm 20mm 100-HSUB
5" 125mm 50mm 550kg 60mm 20mm 125-HSUB
6" + 160mm 50mm 770kg 60mm 20mm 160-HSUB-50
6" + 160mm 60mm 850kg 60mm 20mm 160-HSUB-60
8" 200mm 50mm 1000kg 60mm 20mm 200-HSUB
8" 200mm 60mm 1200kg 60mm 20mm 200-HSUB-60
10" 250mm 80mm 1800kg 90mm 25mm 250-HSUB-80
HSU SeriesExtra Heavy Duty Polyurethane Tyred Wheels on cast iron centres Finish: Yellow/Black
Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Ref. Ball
Journal
5" 125mm 50mm 300kg 60mm 20mm 125-HRT
6" + 160mm 50mm 400kg 60mm 20mm 160-HRT
8" 200mm 50mm 500kg 60mm 20mm 200-HRT
HRT Series Extra Heavy Duty Rubber Tyred Wheels on aluminium centres. Finish: Black/Silver
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
24 Ross Handling
Anti-Static Wheels & Pallet Rollers
Wheel Diam.
Tread Width
Load Cap.
Hub Length Hub Bore Ref. Plain Ref. Roller
*3" + 75mm 25mm 75kg 26mm 8mm *75-ASPR -4" 100mm 22mm 70kg 45mm 12mm - 100-ASR5" 125mm 27mm 100kg 45mm 12mm - 125-ASR
6" + 160mm 24mm 135kg 58mm 20mm - 160-ASR8" 200mm 30mm 205kg 58mm 20mm - 200-ASR
ASR Series Heavy Duty Anti-static (Electrically conductive) Rubber Wheels on Metal Centres. Finish: Black/Zinc
* The 3” is plastic centred with a plain bore.
Type of Roller Roller Diam. Roller Width Hub Bore Load Capacity
Ref.Ball Journal
Polyurethane82mm 100mm *20mm 600kg 82-PR200mm 50mm 20mm 500kg 200-PR
PR Series Polyurethane Pallet Rollers on nylon centres Finish: Brown/White
* 25mm hub bores also available. Extra heavy duty rollers on cast iron centres available to special order
Type of Roller Roller Diam. Roller Width Hub Bore Load Capacity
Ref.Ball Journal
Nylon
82mm 60mm *20mm 700kg 60-NP82mm 75mm *20mm 800kg 75-NP82mm 100mm *20mm 1500kg 82-NP82mm 50mm *20mm 1200kg 200-NP
NP Series Nylon Pallet Rollers Finish: White
* 25mm hub bores also available.
Wheel Diam.
Tread Width
Load Cap.
Hub Length Hub Bore Ref. Plain Ref. Roller
6" 150mm 35mm 150kg 51mm 25.4mm NSS-6(Z) NSS-6R(Z)
7" 175mm 40mm 225kg 51mm 25.4mm NSS-7(Z) NSS-7R(Z)
8" 200mm 50mm 250kg 51mm 25.4mm NSS-8(Z) NSS-8R(Z)
10" 250mm 50mm 350kg 51mm 25.4mm NSS-10(Z) NSS-10R(Z)
12" 300mm 50mm 400kg 51mm 25.4mm NSS-12(Z) NSS-12R(Z)
NSS Series Cushioned Tyred Wheels with Pressed Steel Centres Finish: Black/Zinc
Wheel Diam. Tread Width Load Cap. Hub Length Hub Bore Ref.Plain
13" 330mm 70mm 250kg 66mm 25.4mm PBW-330RIB14" 350mm 52mm 300kg 66mm 25.4mm PBW-350RIB16" 400mm 90mm 350kg 66mm 25.4mm PBW-400RIB
PB Series Solid Rubber Tyred Wheels with Plastic Centres Finish: Black/Red
Wheel Diam.
Tread Width
Load Cap.
Hub Length Hub Bore Ref. Plain Ref. Roller
13" 3330mm 70mm 300kg 66mm 25.4mm BWG-330RIB -
*14" 350mm 75mm 400kg 66mm 25.4mm BWG-350RIB BWR-350RIB
*16" 400mm 100mm 500kg 66mm 25.4mm BWG-400RIB BWR-400RIB
18" 450mm 115mm 750kg 100mm 1 1/4" - BWR-450RIB
BW Series Heavy Duty Rubber Wheels on Metal Centres. Alternative red centres to special order Finish: Black/Black
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
Anti-Static Wheels & Pallet Rollers
25Ross Handling
Cast Iron, Grooved & Flanged Rail Wheels
Wheel Diam.
Tread Width
Load Cap.
Hub Length Hub Bore Ref. Plain Ref. Roller
3" 75mm 32mm 170kg 39mm 12mm 75-CI -
4" 100mm 38mm 400kg 48mm 15mm 100-CI 100-CIB
5" 125mm 41mm 500kg 48mm 15mm 125-CI 125-CIB
6" 150mm 45mm 900kg 60mm 20mm 150-CI 150-CIB
8" 200mm 45mm 1000kg 60mm 20mm 200-CI 200-CIB
10" 250mm 51mm 1360kg 60mm 25mm - 250-CIB
CI Series Heavy Duty Cast Iron Wheels Finish: Black
Wheel Diam. Tread Width Load Cap. Hub Length Hub Bore Ref. Taper Roller
6" 150mm 70mm 3000kg 92mm 31.8mm WHC-306 TM10” 250mm 76mm 3270kg 92mm 31.8mm WHC-310 TM10" 250mm 102mm 5500kg 148mm 34.9mm WHC-510 TM
HC Series Extra Heavy Duty Cast Iron Wheels fitted with Taper Roller Bearings Finish: Black
Wheel Diam. Tread Width Hub Length Hub Bore Load Capacity
Ref.Roller
3" 75mm 37mm 60mm 20mm 225kg 075-CVIB4" 100mm 46mm 60mm 20mm 250kg 100-CVIH5" 125mm 38mm 60mm 20mm 265kg 125-CVIH6" 150mm 45mm 60mm 25mm 910kg 150-CVIH*6" 150mm 48mm 60mm 20mm 1020kg WGR-6RBM208" 200mm 45mm 60mm 25mm 910kg 200-CVIH
GR SeriesV-Grooved Cast Iron Wheels Finish: Silver Additional sizes of Grooved Wheels are also available to special order.
*Black finish on WGR-6RBM20.
Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Ref. Roller &
Ball Bearing
4" 100mm 33mm 250kg 60mm 20mm 100-CFIH
5" 125mm 50mm 900kg 50mm 20mm 125-CFIH
6" 150mm 35mm 910kg 57mm 20mm 150-CF2H
8" 200mm 58mm 1500kg 58mm 25mm 200-CF2H
CF SeriesCast Iron Single Flanged Rail Wheels Finish: Silver, Black also available on some versions. Additional sizes of single flanged wheels are also available to special order.
Wheel Diameter Tread Width Load Cap. Hub Length Hub Bore Ref. Ball
& Taper
2" 50mm 14mm 135kg 17mm 12mm 050-STOL-PLAIN
6" 150mm 50mm 1130kg 48.3mm 20mm 150-ST2H
8” 200mm55mm 2500kg 53mm 31.7mm 200-STTP
85mm 5080kg 81mm 50mm 200-ST3T
10" 250mm 100mm 5450kg 108mm 30mm 250-STT
12" 300mm 100mm 5500kg 108mm 30mm 300-STT
ST Series Extra Heavy Duty Steel Wheels Finish: Black (Silver on some sizes). Solid steel wheels fitted with ball and taper roller bearings.
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
26 Ross Handling
Special Application Wheels
Steel Flat Tread Heavy Duty Antistatic
Twin Wheels
Keyway Polyurethane
Double FlangedFlanged Beam
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
Wheelie Bin Wheels
Wheelie Bin Wheels
27Ross Handling
Terms & Conditions of Sale
1. DEFINITIONSThe following definitions shall apply to the following phrases when used in these conditions:
• ‘’The Company’’ means Ross Handling Ltd
• ‘’ The Goods ‘’ means any standard goods supplied by the company to the purchaser under contract subject to these conditions
• ‘’ The Purchaser’’ means the person(s), firm or company (including the consumer) –whose order for the Goods is accepted by the Company.
• ‘’The Consumer’’ means an individual who enters into a contract for purpose which is outside its trade, business or profession. The consumers will be governed by Distance Selling Regulations ( DSR’s )
The purchaser, to whom the goods are to be supplied, are subject to these conditions:
Our Terms and Conditions apply to all contracts for the sale of Goods by the Company, any deviations are not accepted unless we expressly agreed to them in writing. They are Governed by English Law. The placing of the order will be deemed to constitute acceptance of these terms. These conditions will apply to all future contracts, written or verbal for the supply of goods.
2. QUOTES AND ORDERSQuotes are valid for 30 days from the date of the quote. Quotations are subject to alteration and withdrawal without notice by the Company. Whilst we will make every effort to maintain prices quoted, often unexpected rises in material costs or changes in quantities ordered by the purchaser my affect prices quoted. Orders or acceptance of a quotation, are accepted by the Company, with either a written purchase order , fax or e mail and / or verbal confirmation of the order. Minimum order values are £10 ( exc. Carriage and VAT )Acceptance of the order by the Company is deemed as the Purchaser or Consumer accepting the Terms and Conditions of Sale.
3. PRICEThe price quoted upon application to the Company is exclusive of VAT. All prices quoted are subject to carriage unless the Goods are collected by the Purchaser, or Purchasers courier. The Company reserves the right to alter any of its prices at any time and Goods despatched after the date of such alteration shall be invoiced at the rate then prevailing. Where quantities ordered vary from those quoted for, the Company reserves the right to requote.
4. DESCRIPTIONS, SAMPLES AND LITERATUREAll descriptions, drawings, sizes, specifications issued by the Company or published in Company literature must not be relied upon by the Buyer, as they are issued to give an approximate idea.
5. PAYMENTWhere no credit account has been opened, the Purchaser is required to pay in advance for the Goods. In order to set up a credit account the Purchaser would need to apply to the Company directly for more information.
Where a credit account has been opened the invoice for the Goods will become due 30 days from the date of the invoice. In the event that the purchaser fails to make payment by that date the Company may without prejudice to any other rights which it may have:
a) Suspend all further deliveries to the Purchaser under the contract in question or any other contract.
b) Require payment in advance for any future deliveries
c) Require payment of interest on the amount due at a compound annual rate of 3% per annum above the Bank of England Base Rate for the time prevailing from the date when payment becomes due to the actual date of payment
d) Withdraw the credit account at any time and make credit reference searches in relation to the buyer.
e) Reduce and or remove the credit limit and review on a quarterly basis.
5. DELIVERYUnless otherwise agreed the Goods will be sent to the Purchaser by courier service and unless contrary instructions are received, the Goods will be delivered to the Purchasers place of business and or Invoice address. Therefore transport of the Goods will be subject to the couriers conditions, which are available upon request.
Any period of time or dates quoted for delivery of the Goods are approximate and will not be the essence of the contract. The Company will not be liable for any claim for any shortages, pilferage or damage to Goods unless the Company is advised within 3 working days of delivery. This is in addition to and does not affect a Consumers rights in relation to defective goods given to consumers by law. Should the Goods be returned due to incorrect ordering on the part of the Purchaser, the Company reserves the right to charge 20% restocking charge and will not refund carriage. Should the Purchaser fail to take delivery, or fail to give the Company adequate delivery instructions in advance then the Company will have deemed to have delivered the Goods, and carriage will not be refunded. The Company will not be liable for any claim for non delivery unless advised by the Purchaser within 7 days of the relevant Invoice Date. Any delay in delivery does not entitle the Purchaser to terminate the contract, unless and until the Purchaser has given a specific amount days written notice to the Company requiring delivery to be made and the Company has not fulfilled the delivery.
6. TITLE AND RISKThe Goods remain the sole and absolute property of the Company until the Purchaser has paid for the Goods in full. The Goods are insured by and at the risk of the Company until they are off loaded at the Purchases delivery address, place of business or otherwise specified address. It is then the purchaser’s responsibility to insure the Goods. Purchasers right to possession of the Goods terminates if the Purchaser has failed to pay for the Goods in full or has a Bankruptcy order made against them.
7. WARANTEES AND CONDITIONSThe warrantees and conditions contained in the Sale of Goods Act 1979 shall apply to this contract and all other warrantees and conditions wether express or implied are hereby excluded provided that:
a) The Company may very designs and specifications or modift the Goods supplied without prior notice, provided such modifications do not adversely effect the performance of the Goods.
b)The Company shall be under no liability to the Purchaser or any third party for any consequential or economic loss or expenses.
c) The Company shall be under no liability for breach of any of the said conditions and warrantees arising from defects in the Goods unless a claim has been notified within 6 months form the date the Goods were delivered.
d) The Company may at its option either repair or replace any Goods which may be found to be defective.
e) The Company’s liability for any loss or damage caused by any defect in the Goods shall be limited to the amount paid or payable by the Purchaser to the Company for the Goods.
f) Third Parties , unless the right of enforcement is expressly provided, it is not intended that a third party should have the right to any part of this contract pursuant to the Contract.( Rights of Third Parties 1999)
8. DAMAGES AND SHORTAGESThe Company will credit or replace any products that we agree are defective or damaged, free of charge and carriage free. Providing such Goods are not defective due to misuse and the Purchaser informs the Company within 3 working days of receipt. The Company does not accept liability for expenses incurred by Purchaser on such defective products or for any direct or consequential damage arising from such a defect. Misuse, can refer to using the Goods for a purpose other than specified and intended. For example using higher loads than specified in the Company literature or web site. Using on uneven floors, in extremes of temperatures, using around hazardous chemicals, rough use, impacts, foreign matter intrusions, excessive speeds or any modifications made. Shortages must also be advised to the Company within 3 working days otherwise we cannot accept claims. The Company will not be liable for any failure or delay or for the consequential loss of any failure or delay in performance of the contract if it is due to any event or force majeure, beyond the reasonable control of the company.
9. TERMINATIONThe Company does not accept termination of special orders (which are defined as non standard stock items). These goods are non refundable. The Company reserves the right to terminate the contract to supply Goods should the Purchaser enter into insolvency, bankruptcy, or any arrangements with its creditors, or breach the contract.
10. LIMITATION OF LIABILITYIf the Goods are or any part thereof are defective solely as a result of faulty materials or workmanship of the Company, the Company’s liability shall be limited, at its discretion, either by replacing such goods or the defective part, or by giving the Purchaser credit for the value. No such liability shall arise unless notification of any defect is received by the Company within 3working days
11. INDEMNITYThe Purchaser agrees to indemnify the Company against liabilities incurred by the Company ( including damages, losses and expenses) awarded against or incurred by the Company by reason of any proceedings, claims or demand which may be made or brought against the Company: either
a) Alleging infringement of any patent copyright or other rights of third parties by reason of anything done by the seller in accordance with the Purchaser designs, specifications or instructions express or implied or
b) Alleging injury, death, loss or damage to any third party or property of third party by reason of any defect in any of the goods when the same have been supplied by the Company in accordance with the Purchasers designs, specifications or instructions express or implied
12. CONSUMERS – GOVERNED BY DSR (Distance Selling Regulation) details upon application to the Company
13. EXPORT – Details upon application to the Company
14. LAWThe formation, existence and construction of this contract of terms and conditions is Governed by English Law and shall be subject to the jurisdiction of English Courts
Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk Tel: 0116 2764 987 or Email: sales@rosshandling.co.uk
71 Cannock Street Leicester LE4 9HR Tel: 0116 276 4987 Fax: 0116 274 1751
E-mail: sales@rosshandling.co.uk www.rosshandling.co.uk
top related