building skills and plumbing · 2017-09-11 · services training packages (cpc08) for the...
Post on 06-Jul-2020
5 Views
Preview:
TRANSCRIPT
BUILDING SKILLS AND PLUMBING
cengage.com
NEW AND BEST-SELLING FOR 2018
GLENN P. COSTIN
CONSTRUCTION SKILLS
2E
ADRIAN LAWS
SITE ESTABLISHMENT
FORMWORK & FRAMING
3E
GREG CHEETHAM
ADVANCED BUILDING
& JOINERY SKILLS
2E
TAFE NSW SOUTH WESTERN SYDNEY INSTITUTE
5E
Carpentry & Other General
Constructio
n Trades
BASIC BUILDING &
CONSTRUCTION SKILLS
OWEN SMITH
UPDATED TO SA HB 39:2015
BASIC PLUMBING
SERVICES SKILLS:
ROOF PLUMBING
PETER WENNING
BASIC PLUMBING
SERVICES SKILLS:
SANITARY & DRAINAGE
UPDATED TO THE AS/NZS 3500: 2015
UPDATED TO THE AS/NZS 3500: 2015
BASIC PLUMBING SERVICES SKILLS: WATER SUPPLY
3E
UPDATED TO THE AS/NZS 5601: 2013
BASIC PLUMBING
SERVICES SKILLS:
GAS SERVICES
OWEN SMITH
BASIC PLUMBING
SERVICES SKILLS
3E
TAFE NSW SOUTH WESTERN SYDNEY INSTITUTE
5E
Carpentry & Other General Construction Trades
BASIC BUILDING & CONSTRUCTION SKILLS
Basic Building and Construction Skills, 5e
Hawkins | TAFE NSW
ISBN: 9780170357944
344 pages | Print book | eBook |
LMS integration | modular units | ©2017
Provides learners with the underpinning knowledge, skills and awareness
necessary for a successful career in building and carpentry. Basic Building
and Construction Skills, 5e combines standard industry practice with the
newest industry technology, tools and benchmarks. Fully updated
to reflect present day building practices, standards and legislation,
with a strong focus on sustainability.
The bestselling Building Skills series addresses the key competencies of the Certificate III in Carpentry. Series titles are built for learning with colour photographs and illustrations, online tools, and concepts explored in context to help student understanding. Work Health and Safety (WHS) icons identify critical points for concern and student activities help them apply the knowledge and skills. The Worksheets at the end of each chapter are a resource for teachers and trainers to provide formative assessment and feedback on learner progression.
CPC10111 Cert I in Construction • CPC20112 Certificate II in Construction • CPC20211 Cert II in Construction Pathways
Covers:• CPCCCA2011A Handle carpentry materials
• CPCCCA2002B Use carpentry tools and equipment
• CPCCCM1012A Work effectively and sustainably in the construction industry
• CPCCCM1013A Plan and organise work
• CPCCCM1014A Conduct workplace communication
• CPCCCM1015A Carry out measurements and calculations
• CPCCCM2001A Read and interpret plans and specifications
• CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
• CPCCOHS1001A Work safely in the construction industry
VALUE-PACK:
GLENN P. COSTIN
CONSTRUCTION SKILLS
2E
ADRIAN LAWS
SITE ESTABLISHMENT FORMWORK & FRAMING
3E
GREG CHEETHAM
ADVANCED BUILDING
& JOINERY SKILLS
2E
TAFE NSW SOUTH WESTERN SYDNEY INSTITUTE
5E
Carpentry & Other General
Construction Trades
BASIC BUILDING &
CONSTRUCTION SKILLS
• All four Building Skills titles 9780170282383
CPC30211 Certificate III in Carpentry • CPC32011 Certificate III in Carpentry and Joinery
ADRIAN LAWS
SITE ESTABLISHMENT FORMWORK & FRAMING
3E
Site Establishment Formwork and Framing, 3e
Laws
ISBN: 9780170356152
456 pages | Print book |
eBook | LMS integration |
modular units | ©2017
Build the learning. Updated coverage of sustainability,
materials, tools and industry benchmarks make this text the
most up-to-date and comprehensive on the market.
Covers:• CPCCCA3001A Carry out general demolition of minor building
structures
• CPCCCA3002A Carry out setting out
• CPCCCA3023A Carry out levelling operations
• CPCCCM2002A Carry out excavation
• CPCCCO2013A Carry out concreting to simple forms
• CPCCCA3003A Install flooring systems
• CPCCCA3004A Construct wall frames
• CPCCCA3005B Construct ceiling frames
• CPCCCA3006B Erect roof trusses
• CPCCCA3007C Construct pitched roofs
• CPCCCA3008B Construct eaves
GREG CHEETHAM
ADVANCED BUILDING & JOINERY SKILLS
2E
Advanced Building and Joinery Skills, 2e
Cheetham | SWSI
ISBN: 9780170357951
416 pages | Print book |
eBook | LMS integration |
modular units | ©2017
Advance their careers in building. Advanced Building and Joinery
Skills 2e combines coverage of standard industry practice with
the newest technology and tools.
Covers:• CPCCCA3010A Install and replace windows and doors
• CPCCCA3012A Frame and fit wet area fixtures
• CPCCCA3013A Install lining, panelling and moulding
• CPCCCA3016A Construct timber external stairs
• CPCCCA3017B Install exterior cladding
• CPCCCA3019A Erect and dismantle formwork to suspended slabs, columns, beams and walls
• CPCCJN3003A Manufacture and assemble components for door and window frames and doors
• CPCCJN3004A Manufacture joinery components
• CPCCCA3009A Construct advanced roofs
• CPCCCA3018A Construct, erect and dismantle formwork for stairs and ramps
• CPCCJS3003A Assemble and install stairs
• CPCCJS3004A Manufacture and install continuous hand railing and special stair components
GLENN P. COSTIN
CONSTRUCTION SKILLS
2E
Construction Skills 2e
Costin
ISBN: 9780170376709
240 pages | Print book |
eBook | LMS integration |
modular units | ©2017
New tradies learn to stay safe with comprehensive coverage of the technical and regulatory
changes that students and teachers need to know about working safely at heights, on
scaffolding and elevated work platforms, and with powder-actuated tools. Construction Skills
2e is designed for easy student learning with explanations and definition of terms, coverage of regulation and codes, real-world
examples and practical demonstrations. The author covers core units and important safety areas from Certificate III in Carpentry
/ Carpentry and Joinery, Certificate III in Plumbing and across the trades.
NEW
Covers:• CPCCCM2010 Work safely on scaffolding higher than two metres
• CPCPCM2055A Work safely on roofs
• CPCCCM2007B Use explosive power tools
• CPCCCM3001 Operate elevated work platforms up to 11 metres
• CPCCCM2008B Erect and dismantle restricted height scaffolding
BASIC PLUMBING SERVICES SKILLS
3E
Basic Plumbing Services Skills, 3e
Carter
ISBN: 9780170361972
496 pages | Print book |
eBook | LMS integration |
modular units | ©2017
Provide students with the fundamental knowledge and skills
required for working in the plumbing industry. The text addresses AQF Level 3 competencies of the Construction, Plumbing and
Services Training Packages (CPC08) for the Certificate III in Plumbing. This new edition now reflects current plumbing practices,
tools and techniques, including the new AS/NZS Standards, WHS legislations and sustainability requirements. Topics include the
introductory phase of the plumbing course and information and issues that will be addressed over and over again in a plumber’s
career. The text lends itself perfectly to current workplace situations, and is the key to helping plumbing apprentices gain a better
understanding of the trade.
The Plumbing Skills series provides learners with the knowledge, skills and awareness they need to be successful in the plumbing industry. The series is structured to build step-by-step knowledge, working from general/foundation subjects towards more specific and technical detail as they progress. It develops problem-solving skills, combining safe work practices with professional skills and a thorough understanding of how and why things are done in a certain way.
• Work Health and Safety (WHS) boxes identify critical points for concern • Sustainability boxes contain on up-to-date environmental information• Employability boxes outline the responsibilities of employees, including skills they need to acquire and real-life challenges they
may face at work
References to AS/NZS 3500:2015, referred to in the Plumbing Code of Australia, prompts familiarity with the codes throughout their training.
CPC32413 Certificate III in Plumbing
Covers:• CPCPCM2043A Carry out WHS requirements
• CPCPCM2041A Work effectively in the plumbing and services sector
• CPCPCM2039A Carry out interactive workplace communication
• CPCPCM2040A Read plans and calculate plumbing quantities
• CPCPCM2045A Handle and store plumbing materials
• CPCPCM2046A Use plumbing hand and power tools
• CPCPCM2048A Cut and join sheet metal
• CPCPCM2050A Mark out materials
• CPCPCM2052A Weld using oxy-acetylene equipment
• CPCPCM2053A Weld using manual metal arc welding equipment
UPDATED TO THE AS/NZS 3500: 2015
BASIC PLUMBING SERVICES SKILLS: WATER SUPPLY
3E
Basic Plumbing Services Skills: Water Supply, 3e
Pingnam
ISBN: 9780170361989
288 pages | Print book |
eBook | LMS integration |
modular units | ©2017
Fully updated to current industry practices, this text covers both
‘common’ and ‘water’ stream competencies in the CPC08 Construction, Plumbing and Services Training Package. The knowledge
and skills derived from this text provides students with the tools for future learning and prepares new and existing apprentices for
a long and rewarding career in the industry.
Covers:• CPCPCM3023A Fabricate and install non-ferrous pressure piping
• CPCPWT3020A Connect and install storage tanks to a domestic water supply
• CPCPWT3021A Set out and install water services
• CPCPWT3022A Install and adjust water service controls and devices
• CPCPWT3023A Install and commission water heating systems
• CPCPWT3025A Install water pumpsets
• CPCPWT3026A Fit off and commission heated and cold water services
• CPCPWT3027A Connect irrigation systems from drinking water supply
• CPCPWT3028A Install water services
@CengageANZ @CengageANZ CengageANZ youtube.com/CengageLearningAU
PETER WENNING
BASIC PLUMBING SERVICES SKILLS: SANITARY & DRAINAGE
UPDATED TO THE AS/NZS 3500: 2015 Basic Plumbing Services Skills: Sanitary and Drainage, 2e
Wenning
ISBN: 9780170362009
432 pages | Print book |
eBook | LMS integration |
modular units | ©2017
Introduce students to the knowledge and fundamental skills
they need in the sanitary and drainage areas. Theoretical and
practical tasks enable students to demonstrate their
understanding of key topics and to engage in practical tasks
that underpin knowledge. Regular WHS references throughout
the text focus on important issues faced in the industry and
the workplace. Now updated to include industry best practice
and meet the requirements of the AS/NZS 3500:2015
standards and the training requirements from the CPC08
Training Package.
Covers:• CPCPCM2047A Carry out levelling
• CPCPSN3011B Plan layout of a residential sanitary plumbing system
• CPCPSN3022A Install discharge pipes
• CPCPSN3023A Fabricate and install sanitary stacks
• CPCPSN3024A Install and fit off sanitary fixtures
• CPCPSN3025A Install pre-treatment facilities
• CPCPSN3026A Install sewerage pumpsets
• CPCPDR2021A Locate and clear blockages
• CPCPDR2022A Install domestic treatment plants
• CPCPDR2024A Install stormwater and sub-soil drainage systems
• CPCPDR2025A Drain work site
• CPSPDR2026A Install prefabricated inspection openings and enclosures
• CPCPDR3021A Plan layout of a residential sanitary drainage system
• CPCPDR3022A Install below ground sanitary drainage system
• CPCPDR3023A Install on-site disposal systems
UPDATED TO THE AS/NZS 5601: 2013
BASIC PLUMBING SERVICES SKILLS: GAS SERVICES
OWEN SMITH
Basic Plumbing Services Skills: Gas Services, 2e
Smith
ISBN: 9780170361996
448 pages | Print book |
eBook | LMS integration |
modular units | ©2017
Train competent, knowledgeable gas plumbers. Employability
boxes outline the responsibilities of employees, including skills
they need to acquire and real-life challenges they may face
at work. Students learn better with help from the companion
website featuring additional study and revision tools, including
worksheets, weblinks, crosswords and more. Basic Plumbing
Services Skills: Gas Services addresses AQF Level 3
competencies of the Construction, Plumbing and Services
Training Package (CPC08), and covers new Australian Industry
Standard AS/NZS 5601:2013. The text addresses core and
elective units of competency more closely, aiding with
mapping and auditing requirements.
Covers:• CPCPGS3046A Install LPG systems in caravans, mobile homes and
mobile workplaces
• CPCPGS3047A Install LPG systems in marine craft
• CPCPGS3048A Install gas pressure control equipment
• CPCPGS3049A Install Type A gas appliance flues
• CPCPGS3051A Purge consumer piping
• CPCPGS3053A Disconnect and reconnect Type A gas appliances
• CPCPGS3054A Calculate and install natural ventilation for Type A gas appliances
• CPCPGS3056A Install gas piping systems
• CPCPGS3057A Size consumer gas piping systems
• CPCPGS3059A Install LPG storage of aggregate storage capacity up to 500 litres
• CPCPGS3061A Install and commission Type A gas appliances
• CPCPGS3050A Install Type B gas appliance flues
• CPCPGS3052A Maintain Type A gas appliances
• CPCPGS3055A Install gas sub-meters
• CPCPGS3060A Install LPG storage of aggregate storage capacity exceeding 500 litres and less than 8KL
BUILDING SKILLS AND PLUMBING
Need an inspection copy or tech demo?Find your Learning Consultant
cengage.com.au/contact-us
anz.vet@cengage.com
Inspection copy hotline +61 3 9685 4234
Discover eLearning
More than 5000 eBooks, digital-first content and online solutions that work with your LMS
cengage.com.au/university/learning-solutions
Place an order anz.customerservice@cengage.com
Cengage Australia Level 7, 80 Dorcas Street, South Melbourne, Victoria 3205
Customer Service 1300 790 853
@CengageANZ @CengageANZ CengageANZ youtube.com/CengageLearningAU
OWEN SMITH
UPDATED TO SA HB 39:2015
BASIC PLUMBING SERVICES SKILLS: ROOF PLUMBING
Basic Plumbing Services Skills: Roof Plumbing, 2e
Smith
ISBN: 9780170380393
442 pages | Print book |
eBook | LMS integration |
modular units | ©2018
Elevate their learning! For students addressing the roofing
stream in Certificate III in Plumbing, this text is completely
mapped to the CPC08 Construction, Plumbing and Services
training package, and is now updated to meet the SA HB39-
2015 ‘Installation Code for Metal Roof and Wall Cladding’
and AS/NZS 3500.3:2015 ‘Stormwater Drainage’ standards.
The new chapter on Design and Size Roof Drainage System
addresses the CPCPRF4011B unit (Chapter 19), particularly in
regard to the Certificate IV qualification.
Covers:• CPCPCM2043A Carry out WHS requirements
• CPCPCM2040A Read plans and calculate plumbing quantities
• CPCPRF3022A Fabricate and install roof drainage components
• CPCPRF3021A Receive roofing materials
• CPCPRF3026A Install composite roof systems
• CPCPRF2022A Select and install roof sheeting and wall cladding
• CPCPRF3023A Fabricate and install external flashings
• CPCPCM3021A Flash penetrations through roofs and walls
• CPCPRF3024A Install roof components
• CPCPRF3025A Install roof coverings to curved roof structures
• CPCPRF2023A Collect and store roof water
• CPCPRF4011B Design and size roof drainage systems
OWEN SMITH
UPDATED TO SA HB 39:2015
BASIC PLUMBING
SERVICES SKILLS:
ROOF PLUMBING
PETER WENNING
BASIC PLUMBING SERVICES SKILLS: SANITARY & DRAINAGE
UPDATED TO THE AS/NZS 3500: 2015
UPDATED TO THE AS/NZS 3500: 2015
BASIC PLUMBING
SERVICES SKILLS:
WATER SUPPLY
3E
UPDATED TO THE AS/NZS 5601: 2013
BASIC PLUMBING SERVICES SKILLS:
GAS SERVICES
OWEN SMITH
BASIC PLUMBING SERVICES SKILLS
3E
VALUE-PACK:• Sanitary Drainage + Gas Services 9780170277860
• BPSS + Water Supply 9780170277853
• BPSS + Water Supply + Sanitary & Drainage 9780170280433
• BPSS + Water Supply + Gas Services + Sanitary & Drainage 9780170277877
• Water Supply + Sanitary & Drainage + Gas Services 9780170278577
• All five titles: 9780170282802
Available with the Building and Plumbing Skills SeriesInstructor resources:
• Mapping Grid - downloadable Competency Mapping Grid demonstrates how the text aligns to the training package
• Solutions Manual - includes solutions to end-of-chapter worksheets
• Test Bank - specifically formatted for you to create, customise and deliver tests in minutes for both print and online applications
Student resources:
Student Companion website to reinforce learning, including:
• Printable PDF worksheets from the text
• Glossaries
• Crosswords
• Flashcards
NEW
top related