budgit hoist pricebook - grúa viajera
Post on 21-May-2022
7 Views
Preview:
TRANSCRIPT
Price & SPecification Book
©2010 Budgit Hoists and Tugit, Divisions of Columbus McKinnon Corporation
Phone: 800.477.5003
Fax: 800.374.6853
www.cmworks.com
Schedule # 15025 Prices effective July 1, 2010
CONSUMER PRICE LIST
TUGIT®
Table of Contents
Returns Policy Operation Service & Parts Manual OSHA Compliance WarrantyRETURNSCMCO will not accept returned goods without prior written consent and accompaniment of returned goods tags.
In the event of return of material, agreement will be necessary with CMCO as to the basis for the return charges involved, and issuance of return authorization tags and forms, which must accompany all returns.
Any deviation from the above shall not be acceptable to CMCO, except in writing by authorized CMCO personnel.
OPERATION, SERVICE AND PARTS MANUALOne copy of the operation, service and parts manual of each line item will be supplied and included in the shipment of each item, without charge, as standard policy for each item of equipment covered by the buyer's purchase order.
Additional copies of the manuals are available at extra cost.
OSHAEach BUDGIT and TUGIT product at the time of manufacture is built in accordance with our interpretation of the applicable sections of the American National Standards Institute Safety Standard B30.16, "Overhead Hoists," B30.21 "Manually Lever Operated Hoists," the Federal Occupational Safety and Health Act – 1970 and the National Electric Code ANSI/NFPA 70.
The National Electric Code requires additional protection on units used in certain applications. It is the owner and user's responsibility to determine the suitability of a product for a particular application. Electric hoists must be installed in accordance with the National Electric code as well as other state and local codes and regulations.
Product .............................................................PageElectric Hoists Hoists (BEHC) ..............................................................3-5 Motor Driven Trolleys ...................................................... 6 Options ......................................................................7-11 ShopHoist ................................................................12-13
Manual Trolleys ..........................................................14-17
Cast Iron Wheel Trolleys ................................................ 18
Standard Beam Sizes ..................................................... 19
Air Hoists 600 Series .................................................................... 20 Air Wire Rope Manipulator ........................................... 20 2200 Series .............................................................21-22 6000 Series .............................................................23-24 Motor Driven Trolleys .................................................... 25 Accessories .............................................................25-27
Crane Kits Push Type Underhung & Top-Running ......................... 28 Handgeared Underhung ............................................... 29 Handgeared Top-Running ............................................ 30 Motorized Underhung .............................................31-32 Motorized Top-Running ................................................ 33 Options ....................................................................34-36
Tractor Drives ................................................................. 37
Hand Chain Hoists Series USA Hoists ...................................................38-42 Loadlifter Series 622 .................................................... 43 Model AM Army Type Trolley Hoist .............................. 43
Lever Operated Hoists Series 653 ................................................................... 44 Series 602 & 603 ......................................................... 44
Z Hoist Program ........................................................45-50
Budgit Test Stand ........................................................... 49
Clearance Diagrams ....................................................... 51
Hoist & Component Check List ................................52-53
Specification Sheet ...................................................54-55
3
IMPORTANTThis Price List supersedes all pricing information of earlier dates.
All prices are F.O.B. Wadesboro, NC unless otherwise noted and are subject to change without notice. Net prices are furnished as trade information only and not as a restriction on resale pricing.
Orders subject to final acceptance at our General Offices, Wadesboro, NC. All prices herein are List Consumer Prices.
All inquiries regarding Customer Service and Order Entry Should be directed to the CMCO Customer Service Department.
Electric Chain Hoist Ordering Information
SPECIFY THE FOLLOWING
• Hoist Model • Voltage • Chain Container • Single, Two Speed or Variable Frequency • Phase • Beam Size/Flange Width • Lift • P.B. Drop • Options • Suspension • Power Cord • Accessories
VOLTAGE OPTIONS
Single Speed Two Speed Variable Frequency 115/230-1-60 200/208-3-60 230-3-60 200/208-3-60 230-3-60 460-3-60 230/460-3-60 460-3-60 575-3-60 575-3-60
NOTE: 50 Hertz available, see page 8 Non-Neutral 230v single phase source voltage must be specified at time of order.
Consult factory for Voltages not listed
How To Specify Electric Chain Hoist Model Numbers
BEHC 01 16 - 10 HK - 1
BEHC 01 16 10 HK 1BudgitElectric
Hoist
Capacity
25 = ¼ ton50 = ½ ton01 = 1 ton02 = 2 ton03 = 3 ton
Speeds (fpm)04 = 408 = 8
16 = 1632 = 3264 = 64
Hoist Voltage& Speeds
1 = 115/230 V (1-spd)*†2 = 230 V (2-spd)3 = 230/460 V (1-spd)*4 = 460 V (2-spd)5 = 575 V (1-spd)6 = 575 V (2-spd)7 = 200/208 V (1-spd)8 = 200/208 V (2-spd)9 = 230 V (VFC) - Hoist Only10 = 460 V (VFC) - Hoist Only
Lift (ft)
10 = 1015 = 1520 = 2025 = 25
Etc.
SuspensionHK = Hook Mount Link ChainLG = Lug mounted onlyP = Lug mounted with Push TrolleyHG = Lug mounted with Hand Geared TrolleyMT = Lug mounted with Motorized TrolleyM = Lug mounted for use with Motorized TrolleyRH = Rigid Top Hook Link Chain Only
MAN GUARD ™ Electric Chain Hoists Ordering Information
*Set at factory for higher voltage unless specified
† not available in 2½ hp
BUDGIT®
4
Description Price
Reduce Control 24 Volt on 115 volt single phase add..... 121
CatalogNumber For Portable Electric Hoists Price
905441Do not use on hoist having fan-cooled motors.
78
Bullard Hook For:
Price Add
Upper Lower
BUDGIT Electric and Air Hoist
1/4 and 1/2 Ton...............................1 Ton...............................................2 Ton...............................................3 Ton*..............................................
167182264472
127141182472
*Normally Not Stocked
Model Std. LiftStd.
Speed
Motorhp1
phase
Motorhp3
phase
Hook/Lug Lug Mounted Hoists with Trolleys - Link Chain
Link Chain Push†† Hand Geared†† Motor DrivenNetWt. Price
NetWt. Price
NetWt. Price
NetWt. Price
¼ Ton CapacityBEHC2516-10*-†
1016 1/4** 1/4** 77 1860 94 2047 119 2590 162 4287
BEHC2532-10*-† 32 1/2 1/2 80 1957 97 2144 122 2687 165 4384BEHC2564-10*-† 64 1 1 77 2214 94 2401 119 2944 164 4641
½ Ton CapacityBEHC5016-10*-†
1016 1/2 1/2 80 2126 97 2313 122 2856 165 4553
BEHC5032-10*-† 32 1 1 81 2300 98 2487 123 3030 166 47271 Ton Capacity
BEHC0108-10*-†10
8 1/2 1/2 88 2235 105 2465 130 2965 173 4662BEHC0116-10*-† 16 1 1 89 2347 106 2577 131 3077 174 4774BEHC0132-10*-† 32 N/A 2 1/2 95 2738 112 2968 137 3468 182 5156
* Suspension Type **For 2 speed HP is .5/.16 IMPORTANT: See notes on page 5.† Voltage & Speed Contact customer service for Maximum liftsPolyethylene Chain containers are standard on all BEHC chain hoists 1/4-1 Ton for 28' lift or less, 2 Ton for 20' of lift or less and 3 Ton for 16' of lift or less except for spark resistant models which are not included. To price hoists with chain containers for lifts greater than the standard lifts mentioned, deduct $87 for 1/4 - 1 Ton, $141 for 2 Ton or $159 for 3 Ton from standard 10' list price, then add the appropriate fabric or metal chain container listed on page 10 or 11. On 1/4 to 1 Ton Hoists with lifts 18' or less, we will provide the #922440 chain container. Until January, 2009 a fabric chain container may be shipped in lieu of the Polyethylene at our discretion. Polyethylene Chain containers are designed to fit BEHC or newer models. For BEH models, a fabric or metal chain container must be used.
Suspension
Reduced Voltage
MAN GUARD ™ Electric Chain Hoists ¼ - 1 Ton Capacities
For Standard & Heavy-Duty Service
Hoist Options
Waterproof Covers
Bullard Hook Options
BUDGIT®
DescriptionPriceAdd
Rigid Top Hook (BEHC and 6000 Series BAHC)
1/4 Through 1 Ton.....................................................2 Ton..........................................................................3 Ton..........................................................................
2626126
CatalogNumber
Lug Suspension Bracketsfor use on Price
23456904**905422905424
¼ thru 1 ton capacity hoists.....................2 ton capacity hoists................................3 ton capacity hoists................................
217217349
Eye Bolt Suspension - 1/4 through 1 ton....................... 129
Rigid Mount To Hook Suspension Adapter, for Attachment of Hook Suspension Hoist to Rigid Mount Trolley
1 Ton, Catalog No. 32900901, 4-1/3" Headroom*2 Ton, Catalog No. 32901001, 4-3/4" Headroom*3 Ton, Catalog No. 32901101, 5-3/8" Headroom*Suspension Tool #23470601
26632034746
*Headroom measurement is from bottom of Beam to Saddle of Hook**Use Lug Suspension Bracket 23456902 ($217 list) for hoists between 12/1/06 and 1/7/08 and 905421 ($217 list) for hoists sold prior to 12/1/06.
5
Hoist Options
DescriptionCapacity
(tons)
PricePer ft.of Lift
Plated Link Chain
Load Chain
1/4 & 1/2 14.45 14.45
1 18.40 18.40
2 36.80 36.80
3 55.20 55.20
P.B. CordAll
5.08 5.08
Hand Chain 8.78 8.78
Power Cord All 5.08 5.08
ModelStd. Lift
Std. Speed
Motor hp1
phase
Motorhp3
phase
Hook/Lug Lug Mounted Hoist with Trolleys - Link Chain
Link Chain Push†† Hand Geared†† Motor Driven
Net Wt. Price Net Wt. Price Net Wt. Price Net Wt. Price
2 Ton Capacity
BEHC0204-10*-†
10
4 1/2 1/2 110 2741 158 3130 172 3599 207 5218
BEHC0208-10*-† 8 1 1 111 2882 159 3271 173 3740 209 5359
BEHC0216-10*-† 16 N/A 2 1/2 112 3241 158 3630 172 4099 210 5718
3 Ton Capacity
BEHC0305-10*-†10
5 1 1 136 3604 231 4140 248 4697 296 6636
BEHC0310-10*-† 10 N/A 2 1/2 146 3995 241 4531 258 5088 304 7027
MAN GUARD ™ Electric Chain Hoists 2 - 3 Ton Capacities
For Standard & Heavy-Duty ServiceStandard lifts are 10' 15' and 20' with pushbutton control cable lengths of 6', 11' and 16' respectively for Hook and Lug Mount Hoists with Push or Hand Geared Trolley. Power inlet cable is 5' long (MDT is 3' long). For hoists with Motor Driven Trolley, the Pushbutton control cable lengths are 7', 12', and 17' respectively.
Add-on Prices for special lifts (Add to 10 ft. lift price)
Note: Rigid lug hoist (LG), same price as Hook mount hoists (HK). Standard control voltage is 115 volts, 24 volts is optional, at no charge, except for single phase hoist (see page 4). Hoist & Trolley when ordered together will be shipped separate. * Suspension Type - † Voltage & Speed. Trolleys priced with hoists are for standard flange widths only. Wider widths are available at an additional price, (pick appropriate hoist - "hook/lug" and select trolley from pages 15 thru 19). See page 6 & 7 for motor driven trolley options. Load brake is not standard.
Standard Flange Widths
BUDGIT®
Polyethylene Chain containers are standard on all BEHC chain hoists 1/4-1 Ton for 28' lift or less, 2 Ton for 20' of lift or less and 3 Ton for 16' of lift or less except for spark resistant models which are not included. To price hoists with chain containers for lifts greater than the standard lifts mentioned, deduct $84 for 1/4 - 1 Ton, $136 for 2 Ton or $153 for 3 Ton from standard 10' list price, then add the appropriate fabric or metal chain container listed on page 10 or 11. On 1/4 to 1 Ton Hoists with lifts 18' or less, we will provide the #922440 chain container. Until January, 2009 a fabric chain container may be shipped in lieu of the Polyethylene at our discretion. Polyethylene Chain containers are designed to fit BEHC or newer models. For BEH models, a fabric or metal chain container must be used.
††Trolleys included do not have drop stops as an option. To price for drop stops, use lug mounted hoist price & add price of heavy duty rigid mount trolleys listed on page 18 & include drop stop adder.
Two speed hoists 3:1 3 phase only, Not available on 2 ton 4 fpmAdd to 1 speed base price for ¼ & ½ hp hoist...................................Add to 1 speed base price for 1 hp hoist...........................................Add to 1 speed base price for 2½ hp hoist........................................
406782985
Weatherproofing - Weatherproofing cord grips on electrical cables, sealing all electrical joints, zinc plated load chain (link chain).............. 77
Corrosion resistant featuresOptions include; zinc plated load chain and hooks - zinc plated or anodized lower blocks -sealing of motor shaft sealing and sealing of electrical compartments¼ & 1 Ton..............................................................................................2 & 3 Ton...............................................................................................
205251
Electronic upper & lower limit switch only (installed in hoist)............... 109
Dual Limit Switch (Electronic with Paddle Limit) 115v control only1 Speed - Add.......................................................................................2 Speed - Add.......................................................................................
712792
Lug Suspension Tool #23470601......................................................... 46
Push Button Deduct - 2 button pushbutton station only.................... -(36)
Load Brake (installed in hoist)............................................................. 164
Capacity(tons) Push
HandGeared Motorized
1/4 & 1/2 2-5/8" - 4-5/8"3" - 5" 3" - 5"
1 3" - 5"
23-3/8" - 6" 3-3/8" - 6"
3-5/8" - 6"
3 4" - 6-1/4"
6
Optional Speeds Optional Beam Flange Width Adjustment
Capacity(tons)
StandardNo Charge
Speeds(fpm)
Special Speeds
Capacity(tons)
StandardFlange
Adjustment(in)
Extended Adjustment — with price add to standard
(fpm) Price
1st ExtensionFlange
Adjustment(in) Price
2nd ExtensionFlange
Adjustment(in) Price
1/4 – 1 50, 75, 100 25, 150 60 1/4 – 1 3 – 5 5-1/8 – 7-1/4 86 7-1/2 – 9-1/8 111
2 40, 60, 80 30, 120 120 2 3-5/8 – 6 6-1/4 – 8-5/8 86 8-7/8 – 11-1/4 111
3 40, 50, 75, 100 25, 125 300 3 4 – 6-1/4 6-3/8 – 8-5/8 109 8-3/4 – 11 146
5 - 6 50, 80 25 300 5 - 6 4 – 6-1/4 6-3/8 – 8-5/8 109 8-3/4 – 11 146
7½ 50, 80 25 3000 7½ 4 – 6-1/4 6-3/8 – 8-5/8 109 8-3/4 – 11 146
CatalogNumber
NetWt.(lbs)
StandardFlange WidthAdjustment
(in)
MaximumFlange
Thickness(in)
Min.BeamDepth
(in)
Min.RadiusCurve H.P.
TrolleySpeed(fpm) Price
¼ to 1 - Ton Capacity
MDT01-* 85 3 – 5 15/16 6 3' 1/4 75 2427
2 - Ton Capacity
MDT02-* 95 3-5/8 – 6 1 6 5' 1/4 60 2477
3 - Ton Capacity
MDT03-* 140 4 – 6-1/4 1 6 5' 1/4 50 3032
5 - 6 - Ton Capacity
MDT06-* 190 4 – 6-1/4 1-1/8 8 6' 1/2 50 3406
7½ - Ton Capacity
MDT07-* 190 4 – 6-1/4 1-1/8 8 6' 1/2 50 3406
Electric Chain HoistsMotor Driven Trolleys
1-Speed Motor Driven Trolleys
For 1 or 2 Speed Hoists
Single Speed Trolley
Standard pendant drop is 7'-0", specify if longer length is required.Specify 1 or 2 speed hoist when ordering.Specify nonstandard requirements.
*Trolley Primary Voltage1 = 115/230 V (1-spd)2 = 230 V (2-spd)3 = 230/460 V (1-spd)4 = 460 V (2-spd)5 = 575 V (1-spd)6 = 575 V (2-spd)7 = 200/208 V (1-spd)8 = 200/208 V (2-spd)9 = 230 V (VFC)10 = 460 V (VFC)
Trolley Control Voltage
115 V - standard 24 V - no-charge Option on 3 phase units
BUDGIT®
Three Phase Only
7
Conductor Cord Trolleys
Electric Chain Hoist & TrolleyOptions & Accessories
Food Service OptionsStainless steel load chain and hooks available - Consult factory
*Price includes resetting of the clutch and relabeling. Capacities available are 1½ and 2½ ton and standard capacities listed in our literature. Consult factory for capacities not listed above.
Cord Reels
Special Hoist Options
P/N 234781-99 340º Pivot Base (Optional) - $107 .00 ListNote: Reel Ampacity is based on using reels with short-time rated crane & hoist motors
BUDGIT®
Retractile CordRetractile power cords keep power cable from dragging. Neoprene jacketed. Retracted length 4' - 0"; extended length 20' - 0".
Description Price
Food Grade Lubrication..................................................... Navastane 220 food grade
107
Clean Hoist, No Paint............................................................ 57
Yellow Epoxy Enamel Paint................................................... Lead free white available at no extra charge, for Hoist, Trolley and Chain Container
606
FDA Approved Epoxy Enamel Paint (white only) 1423
CatalogNumber Description
PriceEach
252Installed on same track as hoist................... 2-5/8" - 6" flange
30
CatalogNumber Description Price903999904000
3 Conductor #14AWG...................................4 Conductor #14AWG...................................
209290
Patented Track - 3¼" PriceNarrow flat tread steel wheels.Note: Trolley will not negotiate switches.Trolley Capacity: ¼ thru 7½ Ton, add................................ 366
Stainless Steel Wheels
Motorized Trolley Capacity ¼ thru 3 ton, add.................... 1047
Two Speed Trolleys
Available on all 3-phase models, all speeds, 3 to 1 speed ratio, add............................................................................ 380
Trolley Brake
Motor Mounted.................................................................. 464
Push Button Cable
For longer than standard 7' drop, add............................... 5.18/ft.
Power Supply Cable
For longer than standard 3' length, add............................ 5.18/ft.
Weatherproofing (trolley)
NEMA 4 — Watertight and dusttight enclosures for indoor and outdoor services, add..................................................NEMA 4X Stainless Steel, add...........................................
348590
Electronic Acceleration Control for Soft Start (230/460 3 phase only)
Single Speed.....................................................................Two Speed.........................................................................
400504
Drop Stops (safety lugs) and bumpers
Drop Stops (steel only)......................................................Drop Stops with Rubber Bumpers.....................................
290582
Mounting Hoist to Motor Driven Trolley.............................. 278
CatalogNumber
No ofCollector
RingsNo. & Sizeof Wires
Length(ft)
AMPRating @ 600 VAC
Std.GuideRollers
Std.PivotBase
Crane & Hoist Motors
NetWt.(lbs)
ListPrice
115-1-60Max hpRating
203-1-60Max hpRating
230-3-60Max hpRating
440-2 or3-60 Maxhp Rating
234781-22 4 4 - #16 20' 8 yes no 1/2 1 3 5 33.5 841234781-23 4 4 - #16 30' 8 yes no 1/2 1 3 5 35 853234781-25 4 4 - #16 50' 8 yes no 1/2 1 3 5 38 896234781-42 4 4 - #14 20' 12 yes no 1 1/2 3 5 10 34.9 847234781-43 4 4 - #14 30' 12 yes no 1 1/2 3 5 10 37.1 872234781-45 4 4 - #14 45' 12 yes no 1 1/2 3 5 10 41.5 929
Description PriceZinc Plated Upper or Lower Hook¼ - 1 Ton..............................................................................2 & 3 Ton..............................................................................
62110
Derating of Hoist Capacity*.................................................. 222
Stainless Steel I.D. Tags...................................................... 129
Mag Particle (per hook)........................................................ 230
Explosion Proof or Spark Resistant Applications................Contact Factory
Push Button Stations (trolley) PriceTwo extra single speed buttons, add.........................................Two extra two speed buttons, add.............................................Stop-start buttons, add..............................................................Stop-start buttons - maintained, add........................................To delete 4-button push button station and cable assembly, deduct........................................................................................
40554055
-(40)
Fuse Panel
A fuse panel with both hoist and trolley power circuit fuses for overcurrent protection................................................................ 293
Mainline Disconnect Panel
A mainline contactor panel for applications requiring disconnect to be mounted on trolley. Controlled by STOP-START buttons included in push button station. Panel includes hoist and trolley fusing, add........................................ 671
Electrical Adapter Kits
The following field conversion electrical adaptor kits are required when it is desired to modify existing lug mount push button hoists to lug mount for motor driven trolleys.
Catalog Electrical Power Price
901821901823
115/230 volt, 1 phase, 60 Hertz AC........................All voltages, 3 phase, 60 Hertz AC S.S, 2 speed....
5669
8
Electric Chain Hoist & Trolley Options & Accessories
*For ¼ and ½ ton units, use 1 ton Rigid Mount Trolleys when mounting enclosures on trolleys.
Electrical Options
BUDGIT®
Thermal Overload Relays, 3 Phase Power Price
Single Speed Hoist Only - Hoist Mounted,...............................................................................................Rigid Mount Trolley*, Single or Two Speed Hoist - Mounted on Manual Trolley .....................................Motorized Hoist and Trolley - Mounted on Trolley ...................................................................................
322322423
Branch Circuit Motor Fusing, Trolley Mounted
Hoist only on Rigid Mount Trolley*...........................................................................................................Hoist and Motorized Trolley......................................................................................................................
289293
Mainline Disconnect
Hoist Mounted, Single Speed Only (Includes, Start-Stop Buttons)..........................................................Manual Trolley Mounted on Rigid Mount* (Trolley Includes Hoist Fusing & Start-Stop Buttons).............Motorized Trolley Mounted (Includes Hoist & Trolley Fusing & Start-Stop Buttons)................................
544671671
Special Pushbutton Stations (factory installed) Apply to Factory
Three Position Selector Switch
Two Hoists Only........................................................................................................................................Two Hoists & Motorized Trolleys...............................................................................................................
Apply to Factory
50 Hertz Power Supply, Hoist and Motorized Trolley, Add Per Motor (single speed only)
115/230 Volts, Single Phase Power (Hoists Only) 117001-54.................................................................115/230 Volts, Single Phase Power (Trolley)............................................................................................
Apply to Factory
Three Phase Power
190/380 Volts (50 Hz)..............................................................................................................................200/400 Volts (50 Hz)..............................................................................................................................207/415 Volts (50 Hz)..............................................................................................................................220/440 Volts (50 Hz)..............................................................................................................................230/460 Volts (50 Hz)..............................................................................................................................240/480 Volts (50 Hz)..............................................................................................................................Two Speed (all power supplies)................................................................................................................
No chargeP.O.A.P.O.A.P.O.A.P.O.A.P.O.A.P.O.A.
9
Electric Chain Hoist & Trolleys Options & Accessories
* Add to single speed hoist and/or trolley list price.
Note: Model BEHC hoists must have load brake option for VFD control.
Under the Cover Variable Frequency DrivesFor Electric Chain Hoist and Motor Driven Trolleys
Standard Features Speed range of 10:1
2 - step infinitely variable as standard
Thermal overload protection
Fault recorder
CURRENT COLLECTOR ARRANGEMENT
When slide-type current collectors for insulated conductors are to be used to supply power to the trolley, the following collector components may be ordered with the trolley at extra cost.
Determine number of collectors required and location of conductors, whether one side of beam or both sides of beam. Collector poles and brackets shown below indicate beam sizes with conductor support on top of beam. If beams are larger, the conductor support must be welded into web of beam. Pressed steel trolleys require a collector mounting plate.
Note: Not available in 575 volt.*Not CSA Approved
BUDGIT®
Add Option - 3 step buttons (hoist or trolley) $178
Catalog Number Price
901590Collector Pole and Bracket..................................Suitable for a maximum of 6 collectors.Adjustable for beam depth sizes 8" thru 12"
62
For collector mounting plate, pressed steel wheels trolleys
901584901585
Trolleys with bumpers...........................................Trolleys without bumpers.....................................
4141
Electric Hoists
Max Horsepower 3 Phase Power Supply List Add Price*
¼ - ½ 230/460 P.O.A.
1 230/460 P.O.A.
2½ 230/460 P.O.A.
Motor Driven Trolleys
½ 230 1232
½ 460 1232
10
Note: Polyethylene chain containers are standard on all BEHC models with standard lifts as noted on page 4 & 5 except for spark resistent or chain models which is not included.
For containers having greater capacities, see page 11.Catalog Numbers 905494 thru 905497 Chain Containers are Low Headroom design and are supported from trolley suspension pins. To use these containers, Hoist must be in Lug Suspension, Cross Mounted.
Electric Chain HoistsOptions & Accessories
Hoist Load Point ControlAn ergonomically designed handle located on the bottom block permits the hoist operating hand to position, load and operate the hoist, leaving the other hand free to position the load. Hoist point control will be shipped loose unless specified on order.
Metal Chain Containers - For BUDGIT Electric Hoists
Catalog Number 905435
For Link Chain
For fabric containers see page 12
BUDGIT®
Catalog Number
Hoist LoadRating(tons)
Hoist RatedLift(ft)
ShippingWt.(lbs) Price
901931
1/8
10
14
997
901932 15 1043
901933 20 1082
901934
1/4
10 997
901935 15 1043
901936 20 1082
901937
1/2
10 997
901938 15 1043
901939 20 1082
CatalogNumber
Type Hoist Chain
NetWt.
Maximum Lift in Feet
Dimension
Price
Hoist Cap.1/4 - 1/2
TonHoist Cap.
1 TonHoist Cap.
2 TonHoist Cap.
3 Ton R S
905434
Link
4 15 15 do not use do not use
4-1/2
10 108
905435 8 30 30 15 10 15 111
905436 10 45 45 22 15 19 167
905437 14 60 60 30 20 23 189
905438 15 75 75 37 25 28 305
905439 16 90 90 45 30 33 342
905494
Link
16
do not use do not use do not use
20
10-1/4
15 519
905495 20 30 19 548
905496 28 40 23 576
905497 30 50 28 582
11
* ¼ - 1 ton insert number 6 2 ton insert number 7 3 ton insert number 8
Link chain hoists using these long lift containers must be lug suspended, cross mounted.Chain containers are supported from the trolley suspension pins.Chain containers are low headroom design, 10½ inches wide.S Dimension = bottom of hoist to bottom of chain container.
Electric Chain Hoists Options & Accessories
Metal Long Lift Link Chain Containers
BUDGIT®
Cloth Chain Containers (BEHC or BEH)
Note: Polyethylene chain containers are standard on all BEHC models with standard lifts as noted on page 4 & 5 except for spark resistent or chain models which is not included.
S Dimension = bottom of hoist to bottom of chain container.
Link Chain
Standard Chain Container Catalog Number
Chain Container
Depth(S Dim.)
Maximum Lift in feet
ListPrice¼ & ½ Ton 1 Ton 2 Ton 3 Ton
439425-*1 15 65 60 30 20 519
439425-*2 19 100 90 45 30 548
439425-*3 23 130 120 60 40 576
439425-*4 27 165 150 75 50 607
439425-*5 31 200 180 90 60 645
439425-*6 35 230 210 105 70 675
Cloth Chain Containers
Standard Chain Container Catalog Number
Chain Container
Depth(S Dim.)
Maximum Lift in feet
ListPrice¼ & ½ Ton 1 Ton 2 Ton 3 Ton
805435 17 30 30 15 10 132
805436 19 45 45 22 15 174
805437 25 60 60 30 20 226
Polyethylene Chain Containers
CatalogNumber
ChainContainer Depth
Maximum Lift in ft. ListPrice1 ton 2 ton 3 ton
922440922441922442922443
10-3/1612-5/1615-13/1620-1/16
18284050
9142025
691316
8787141159
Polyethylene Chain Containers
12
Shophoist Electric Chain Hoists250 - 1000 lbs
Top Hook onlyFor lifts other than standard 10 ft. (add extra charges)Extra push button cord (standard drop 4 ft. shorter than lift) $5.68/ft.Extra power cord (standard length 6 ft.) $5.68/ft.Extra chain per ft. lift: $10.14 - 250/300/500 lbs., $20.28 - 600/1000 lbs.*Contactor in pendant station
Prices are FOB Damascus, Virginia
ShopHoist
BUDGIT®
250 lb. CapacityCatalogNumber
StandardLift Speed Voltage
Parts ofChain
NetWeight Price
931769
10
16
115-1-60
1 28
1260931770 115-1-60* 1126931771 230-3-60 1260931772 460-3-60 1260931774
24230-3-60 1290
931775 460-3-60 1290931777
40230-3-60 1321
931778 460-3-60 1321
300 lb. Capacity931780
10
16
115-1-60
1 28
1260931781 115-1-60* 1126931783 230-3-60 1260931784 460-3-60 1260931786
24230-3-60 1290
931787 460-3-60 1290931806
40230-3-60 1321
931807 460-3-60 1321
500 lb. Capacity931837
10
12
115-1-60
1
26 1517931838 115-1-60*
281380
931839 230-3-60 1517931840 460-3-60 1517931842
8
115-1-60
2
32 1454931843 115-1-60*
34
1322931844 230-3-60 1454931845 460-3-60 1454931847
20230-3-60 1513
931848 460-3-60 1513931862
24230-3-60
1 281576
931863 460-3-60 1576
600 lb. Capacity931790
10
8
115-1-60
2
34 1454931791 115-1-60* 32 1322931793 230-3-60
34
1454931794 460-3-60 1454931796
12230-3-60 1484
931797 460-3-60 1484931880
20230-3-60 1513
931881 460-3-60 1513
1000 lb. Capacity931865
10
6
115-1-60
2
34 1649931866 115-1-60* 32 1577931867 230-3-60
341649
931868 460-3-60 1649931870
8230-3-60
32
1662931871 460-3-60 1662931873
12230-3-60 1678
931874 460-3-60 1678
13
ShopHoist Chain Container*
ShopHoist Bulk Load Chain*
* Prices are FOB Damascus, Virginia
Shophoist Electric Chain HoistsAccessoriesBUDGIT®
Beam Clamps
Note: Beam clamps are shipped FOB, Wadesboro, NC.
modelmodel
number cap.part
numberuserprice
allowableflange width net
wt.(lbs)min. max.
BCYFBeam
Clamps
BCYF-1 1 840-05000 78 3.00 9.00 8.40
BCYF-2 2 840-07000 87 3.00 9.00 10.60
BCYF-3 3 840-09000 134 4.00 9.00 20.20
BCYF-5 5 840-13000 168 4.00 10.25 24.20
BCYF-10 10 840-17000 268 3.50 12.50 34.10
CatalogNumber
NetWeight
Hoist Cap.250/300/500
lbs.Hoist Cap.
600/1000 lbs. Price
2063 4 10 5 48
2064
5
20 10 54
2065 40 20 63
2066 80 40 69
2067 6 120 60 118
Hoist Catalog Number & Capacity Description
Feet of Chain in Package
NetWeight
CatalogNumber Price
250, 300, 500, 600 & 1000 lb.
Shop Hoist
.157 BarDiameter
250 66 85018 2537.50
500 126 85019 5075.00
1000 244 85020 10150.00
14
I-Beam Trolleys
Push Type & Hand Geared Trolleys
Hook Suspension TrolleysCapacities 550 to 11000 PoundsCapacities ¼ thru 5-tonTrolleys are Metric rated
*Spark and corrosion resistant models - Equipped with bronze wheels and vinyl covered bumpers. The hand chain is Aluminum alloy, anti-tilt roller is bronze and wheel gears are aluminum bronze.
**When used on smallest I-Beam Size, beam must be free of obstructions such as clips, suspension bolts and nuts.
Push-Type Patented Track TrolleysCapacities ¼ thru 2 Tons
Trolley Adapter Links - For use with Hook Suspension Trolleys
BUDGIT®
Hook Suspension TrolleysCapacities 550 to 6000 PoundsFor hook-type hoists¼ thru 2-ton capacity trolleys are Metric rated3-ton capacity trolleys are not metric rated
Catalog Number Price
281282283
For ¼ & ½ Ton Trolleys.......................................For 1 Ton Trolleys...............................................For 1½, 2 & 3 Ton Trolleys..................................
404042
Spark & Corrosion Resistant Models*
CatalogNumber
Capacity(tons)
NetWt
(lbs)
Adjustable to Fit These Beam Sizes (inches)
Price**
Min DepthMin Flange
WidthMax Flange
Width80SR 1/4 13 4 2-5/8 4-5/8 1660
80WFASR 1/4 14 4 5 7 172181SR 1/2 13 4 2-5/8 4-5/8 1660
81WFASR 1/2 14 4 5 7 172182SR 1 25 5 3 5 1843
82WFASR 1 27 5 5 7 189782WFBSR 1 28 5 7 9 1933
79SR 1-1/2 36 6 3-3/8 6 214879WFASR 1-1/2 39 6 6 8 223379WFBSR 1-1/2 40 6 8 10 2281
83SR 2 36 6 3-3/8 6 214883WFASR 2 39 6 6 8 223383WFBSR 2 40 6 8 10 2281
Standard Flange I-Beam
Catalog*Number
Capacity(tons)
Std. Beam Height
(in)
I-BeamWidth
(in)
Min. Radius Curve
(in)
Wheel TreadDiameter
(in)Net Wt.
(lbs) Price
CBTP-0025 ¼ 4-24 2.0 - 8.7 27 2.36 19 148
CBTP-0050 ½ 4-24 2.0 - 8.7 27 2.36 19 148
CBTP-0100 1 5-24 2.3 - 8.7 36 2.36 26 178
CBTP-0150 1½ 6-24 2.3 - 8.7 45 3.15 46 290
CBTP-0200 2 6-24 2.3 - 8.7 45 3.15 46 290
CBTP-0300 3 8-24 3.0 - 8.7 55 4.41 86 503
CBTP-0500 5 10-24 3.5 - 8.7 70 4.92 130 699
I-Beam TrolleyFor Hook-Type Hoists
Capacity(tons)
Catalog Number
Wheel Diameter
(in) Price
1 900382 4 518
2 900383 5 680
15
Push Type & Hand Geared Trol-leys
Hand Geared I-Beam Trolleys
Hook Suspension TrolleysCapacities 2200 to 11000 PoundsFor hook-type hoists - 1 thru 5-ton capacity trolleys are Metric rated
For longer than standard 9'-6" hand chain drop, add:
Standard Models ............................................................... per ft. $8.83 Spark & Corrosion Resistant Models Aluminum Chain ... per ft. $20.05
** When used on smallest I-beam size, beam must be free of obstructions such as clips, suspension bolts and nuts.
*Spark and corrosion resistant models - Equipped with bronze wheels and vinyl covered bumpers. The hand chain is Aluminum alloy, anti-tilt roller is bronze, and wheel gears are aluminum bronze.
Load Lifter Trolley SERIES 633 (Bulletin #LT/BC-C5007-0202)*
*Prices are FOB Wadesboro, NC
BUDGIT®
Hook Suspension TrolleysCapacities 2200 to 6000 PoundsFor hook-type hoists - 1 thru 2-ton capacity trolleys are Metric rated
Hand Chain Drop ............................................................... per ft. $9.51Standard Hand Chain Drop = 15'
Geared Trolley
Catalog*Number
Capacity(tons)
Std. Beam Height
(in)
I-BeamWidth
(in)
Min. Radius Curve
(in)
Wheel TreadDiameter
(in)Net Wt.
(lbs) Price
CBTG-0100 1 5-24 2.3 - 8.7 36 2.36 26 606
CBTG-0150 1½ 6-24 2.3 - 8.7 45 3.15 46 807
CBTG-0200 2 6-24 2.3 - 8.7 45 3.15 46 807
CBTG-0300 3 8-24 3.0 - 8.7 55 4.41 86 1097
CBTG-0500 5 10-24 3.5 - 8.7 70 4.92 130 1538
Spark & Corrosion Resistant Models *
CatalogNumber
Capacity(tons)
Net Wt.(lbs)
Adjust to Fit These Beam Sizes
Price** Min Beam
DepthMin Flange
WidthMax Flange
Width
82GSR 1 41 6 3 5 2813
82GWFASR 1 43 6 5 7 2984
82GWFBSR 1 44 6 7 9 3000
79GSR 1-1/2 52 7 3-3/8 6 3194
79GWFASR 1-1/2 54 7 6 8 3295
79GWFBSR 1-1/2 55 7 8 10 3343
83GSR 2 52 7 3-3/8 6 3194
83GWFASR 2 54 7 6 8 3295
83GWFBSR 2 55 7 8 10 3343
CatalogNumber
Capacity(tons)
Weight(lbs)
Adjustable to Fit Standard S-Beams
PriceDepth
(in)
Flange Width
Min.(in)
Max.(in)
922085 1/2 18 3-15 2 - 1/2 5 - 5/8 155
922086 1 34 5-24 3
8
183
922087 2 54 6-24 3 - 5/8 305
922088 3 100 8-24 4 518
922089 5 168 10-24 4 - 5/8 783
16
Push Type & Hand Geared Trol-leys
Push-Type ModelsCapacities 500 to 6000 Pounds
‡ Equipped with anti-tip roller for use with the Series USA lug mount hoist.* Equipped with bumpers
Hand-GearedCapacities 2000, 4000 & 6000 Pounds
* Equipped with bumpers. Hand Chain Drop is 9'-6"
** For flange widths not shown, apply to factory. Smallest radius curves that these trolleys will negotiate are same as push-type trolleys. Spark and corrosion models — Equipped with bronze wheels and vinyl covered bumpers.
For longer than standard 9'-6" hand chain drop, add $8.83 per foot, spark and corrosion resistant models, add $20.05 per foot for aluminum hand chain.
Note: Drop stops are not available on these models.
Electric, Manual and Air Hoist Lug Mounted Trolleys
Prices apply to standard flange adjustments. Apply for prices on other than Standard.*Prices are FOB Damascus, Virginia
Close Radius Series 632 Plain Ball Bearing Trolley (Hook Mounted)*
* Bumpers included‡ Equipped with anti-tip roller for use with the Series USA lug mount hoist.
BUDGIT®
Push-Type Patented Track TrolleysCapacities ¼ thru 2 Tons
Trolleys for Standard Flange I-Beams
CatalogNumber
Capacity(tons)
Net Wt.(lbs)
Adj. to Fit These Beam Sizes**
Price
Min. BeamDepth
(in)
FlangeWidth
(in)
905401*504555-5
‡*504554-15905402
*504554-13‡ 905409* 905403* 905404
¼ & ½¼ & ½
111123
1516242324244375
44555566
2-5/8 - 4-5/82-5/8 - 4-5/8
3 - 53 - 53 - 53 - 5
3-3/8 - 63-3/8 - 6
187264357230308281389536
Spark Resistant Models (For Manual Hoists)
905461905462
905462W1‡ 905465* 905463
½1
3/8, ½, & ¾12
1523242445
45556
2-5/8 - 4-5/83 - 5
5-1/4 - 7-3/83 - 5
3-3/8 - 6
17451886198619872192
Spark Resistant Models (For Air Hoists)
905461905462905463
3/8
½ & ¾1
152345
456
2-5/8 - 4-5/83 - 5
3-3/8 - 6
174518862192
Trolleys for Wider Flange I-Beams
905405*505322-6905405W1‡ 905410* 905406* 905407* 905408
1111233
24252625445278
5555666
5-1/4 - 7-3/85-1/4 - 7-3/8
7-1/2 - 95-1/4 - 7-3/86-1/4 - 8-7/86-1/8 - 8-7/8
9 - 11
314354409381448713771
Trolleys for Standard Flange I-Beams
CatalogNumber
Capacity(tons)
Net Wt.(lbs)
Adj. to Fit TheseBeam Sizes**
Price
Min. BeamDepth
(in)
FlangeWidth
(in)
*905411 1 40 6 3 – 5 730
*905412 2 57 7 3-3/8 – 6 858
*905417 3 92 7 3-3/8 – 6 1093
Spark Resistant Models (For Air Hoists)
*905471 1/2 & 3/41
40 6 3 – 5 2945
*905472 57 7 3-3/8 – 6 3223
Trolleys for Wider Flange I-Beams
*905413 1 41 5 5-1/4 – 7-3/8 832
*905414 2 58 6 6-1/4 – 8-7/8 947
*905418 3 100 6 6-1/8 – 8-7/8 1174
*905419 3 102 6 9 – 11 1218
CatalogNumber
MaximumCapacity
(tons)
Approx.Shipping
Wt.(lbs)
StandardBeam Height
(in)
StandardFlange Width
(in)
MinimumRadius Curve
(in) Price
B3222 1/4 & 1/2 104 - 12 2-5/8 - 5-1/16 7
158
B3224 1 12 193
B3226 1-1/2 & 2 25 6 - 15 3-3/8 - 5-5/810
316
B3230 3 33 8 - 18 4 - 6-1/4 555
I-Beam TrolleyFor Lug Mounted Hoists
*1 900385 4 547
‡ 1 900387 4 563
2 900386 5 580
17
For longer than standard 9'-6" hand chain drop, add $8.83 per ft, spark and corrosion resistant models add $20.05 per ft for aluminum hand chain.¥ For use on "6000" series only.
For drop stops add: Steel only ......................... $290 With rubber bumpers ........ 582
Heavy Duty Rigid Mount Trolleys
Wider Flange Beams - Add Prices Apply to Push or Hand Geared, Standard or Spark Resistant
Patented Track (price for complete trol-ley)
Push Type & Hand Geared Trolleys
Note: For 7½ ton consult factory.
BUDGIT®
Push Type TrolleysTrolleys for Standard Flange I-Beams
Hand Geared TrolleysTrolleys for Standard Flange I-Beams
CatalogNumber
Capacity(tons)
Net Wt.(lbs)
Adjust to Fit TheseBeam Sizes
PriceCatalogNumber
Capacity(tons)
Net Wt.(lbs)
Adjust to Fit TheseBeam Sizes
Price
Minimum Beam Depth
(in)
FlangeWidth
(in)
Minimum Beam Depth
(in)
FlangeWidth
(in)
900211900221900231900241PUT07
12
3 & 45 & 67½
405085150150
66688
3 – 53-5/8 – 64 – 6-1/44 – 6-1/44 – 6-1/4
48654180111061106
900261900271900281900291HGT07
12
3 & 45 & 67½
5565100165165
66688
3 – 53-5/8 – 64 – 6-1/44 – 6-1/44 – 6-1/4
912997134818771877
Spark Resistant Models (For Manual Hoists) Spark Resistant Models (For Manual Hoists)
900216900226900236900246
12
3 & 45 & 6
405085150
6668
3 – 53-5/8 – 64 – 6-1/44 – 6-1/4
1304144418392585
900266900276900286900296
12
3 & 45 & 6
5565100165
6668
3 – 53-5/8 – 64 – 6-1/44 – 6-1/4
1891197024263415
Spark Resistant Models (For Air Hoists) Spark Resistant Models (For Air Hoists)
¥ 900216¥ 900226 900236
1/2-3/412
405085
666
3 – 53-5/8 – 6-1/4
4 – 6
130414441839
¥ 900266¥ 900276 900286
1/2-3/412
5565100
666
3 – 53-5/8 – 6-1/4
4 – 6
189119702426
TrolleyCapacity
(tons)
FlangeRange
Std.
Extended Flange Range
1st ExtensionFlange Range
PriceAdd
2nd ExtensionFlange Range
PriceAdd
12
3, 45, 6
7-1/2
3 – 53-5/8 – 64 – 6-1/44 – 6-1/44 – 6-1/4
5-1/8 – 7-1/46-1/4 – 8-5/86-3/8 – 8-5/86-3/8 – 8-5/86-3/8 – 8-5/8
9090114114114
7-1/2 – 9-1/88-7/8 – 11-1/4
8-3/4 – 118-3/4 – 118-3/4 – 11
129129161161161
Capacity(tons)
Push Type Hand Geared
Standard Spark Resistant Standard Spark Resistant
Catalog Price Catalog Price Catalog Price Catalog Price
12
3, 45, 6
900215900225900235900245
69476310381504
900220900230900240900250
1418148318772541
900265900275900285900295
1137123616082162
900270900280900290900300
1905200524593220
18
Cast Iron Wheel Trolleys
For beam flange widths larger than listed, apply to factory.
*For Spark Resistant models, add SR at the end of the catalog number.Model P trolleys for wide flange beam adaptation, or beams larger than standard add 25% of trolley price, see maximum flange widths listed below.Additional hand chain, add $8.30 per foot of drop for standard models and add $10.10 per foot of drop for spark resistant models. Not metric rated.
**1/4 - 12 ton units are supplied straight sided plates with universal wheels for operation on flat or tapered beams. 16 - 25 ton units are supplied with canted side plates for operation on Standard American tapered I-beams. For other beams or patented track applications, consult factory.
Push and Hand-Geared TypeCapacities ¼ to 25 Tons
Prices are FOB Lisbon, Ohio
BUDGIT®
Model P Push Type
Catalog*Number
Capacity(tons)
Net Wt.(lbs)
Beam Adjustment
Range**
SmallestRadius Curve
(in) Price
SparkResistant
Price
1641-0025 ¼ 23 23/4" - 5" 20 356 756
1641-0050 ½ 23 23/4" - 5" 20 356 756
1641-0100 1 43 3" - 6" 24 404 756
1641-0150 1½ 45 3" - 6" 24 456 1125
1641-0200 2 67 33/8" - 61/4 30 498 1125
1641-0300 3 70 33/8" - 61/4 30 657 1767
1641-0400 4 155 4" - 7" 36 792 2060
1641-0500 5 160 4" - 7" 36 1075 2084
1641-0600 6 160 4" - 7" 36 1075 2084
1641-0800 8 300 45/8" - 8" 60 1672 3525
1641-1000 10 310 45/8" - 8" 60 2139 4620
1641-1200 12 310 45/8" - 8" 60 2139 4727
1641-1600 16 800 6" - 8" 96 4160 9349
1641-2000 20 845 6" - 8" 96 4557 9835
1631-2500 25 1045 6" - 8" 120 5047 10291
Model P Hand-Geared Type
Catalog*Number
Capacity(tons)
Net Wt.(lbs)
Beam Adjustment
Range**
HandChain Drop
(ft) Price
SparkResistant
Price
1642-0100 1 62 3" - 6"
8
686 1328
1642-0150 1½ 65 3" - 6" 743 1446
1642-0200 2 90 33/8" - 61/4 796 1548
1642-0300 3 93 33/8" - 61/4 1052 1934
1642-0400 4 184 4" - 7" 1175 2421
1642-0500 5 188 4" - 7" 1517 2617
1642-0600 6 188 4" - 7" 1517 2617
1642-0800 8 347 45/8" - 8" 2149 3880
1642-1000 10 360 45/8" - 8" 3001 5495
1642-1200 12 360 45/8" - 8" 3001 5528
1642-1600 16 895 6" - 8" 5262 11718
1642-2000 20 955 6" - 8" 5959 12867
1632-2500 25 1200 6" - 8" 6717 13274
Maximum Acceptable Flange Widths of Wide Flange Beams
Capacity(tons)
Flange Width(in)
1/4, 1/2, & 11-1/2 & 2
3 & 45, 6, 8, 10 & 12
66 - 5/87 - 1/48 - 1/4
19
Standard Beam Sizes
Standard Beam SizesThese charts show common standard beam sizes, weights and nominal flange widths for both American Standard Section "S" Shapes and Wide Flange Shapes (as listed by American Institute of Steel Construction). Wide Flange Shapes are W Shapes effective approximately September 1, 1978.
Always include beam sizes when ordering BUDGIT Trolleys and Trolley Hoists.
BUDGIT®
American StandardSections ("S" Beams) Wide Flange Sections ("W" Beams)
Designation(in & lbs)
Flange Width
(in)Designation
(in & lbs)
Flange Width
(in)Designation
(in & lbs)
Flange Width
(in)Designation
(in & lbs)
Flange Width
(in)
S4 X 7.7 2 5/8 W6 X 94
W12 X 14
4
W18 X 35
6S4 X 9.5 2 3/4 W6 X 12 W12 X 16 W18 X 40
S5 X 10 3 W6 X 15 6 W12 X 19 W18 X 46
S5 X 14.75 3 1/4 W6 X 16 4 W12 X 22 W18 X 50
7 1/2S6 X 12.5 3 3/8 W6 X 20
6W12 X 26
6 1/2
W18 X 55
S6 X 17.25 3 9/16 W6 X 25 W12 X 30 W18 X 60
S7 X 15.3 3 5/8 W8 X 10
4
W12 X 35 W18 X 65
S7 X 20 3 7/8 W8 X 13 W12 X 40
8
W18 X 71 7 5/8
S8 X 18.4 4 W8 X 15 W12 X 45 W18 X 7611
S8 X 23 4 1/8 W8 X 185 1/4
W12 X 50 W18 X 86
S10 X 25.4 4 5/8 W8 X 21 W12 X 5310
W18 X 97 11 1/8
S10 X 355
W8 X 246 1/2
W12 X 58 W18 X 10611 1/4
S 12 X 31.8 W8 X 28 W14 X 225
W18 X 119
S12 X 35 5 1/8 W8 X 31
8
W14 X 26 W21 X 44
6 1/2S12 X 40.8 5 1/4 W8 X 35 W14 X 30
6 3/4
W21 X 50
S12 X 505 1/2
W8 X 40 W14 X 34 W21 X 57
S15 X 42.9 W8 X 48 8 1/8 W14 X 38 W21 X 62
8 1/4S15 X 50 5 5/8 W8 X 58
8 1/4W14 X 43
8
W21 X 68
S18 X 54.7 6 W8 X 67 W14 X 48 W21 X 73
S18 X 706 1/4
W10 X 12
4
W14 X 53 W21 X 83
S20 X 66 W10 X 15 W14 X 61
10
W24 X 557
S20 X 75 6 3/8 W10 X 17 W14 X 68 W24 X 62
S20 X 85 7 W10 X 19 W14 X 74 W24 X 68
9S20 X 95 7 1/4 W10 X 22
5 3/4W14 X 82 10 1/8 W24 X 76
S24 X 80 7 W10 X 26 W16 X 265 1/2
W24 X 84
S24 X 90 7 1/8 W10 X 30 5 7/8 W16 X 31 W24 X 94
S24 X 100 7 1/4 W10 X 33
8
W16 X 36
7
W27 X 84
10S24 X 106 7 7/8 W10 X 39 W16 X 40 W27 X 94
S24 X 120 8 W10 X 45 W16 X 45 W27 X 102
W10 X 5410
W16 X 50 W27 X 114
W10 X 60 W16 X 57 7 1/8 W30 X 108
10 1/2W10 X 68 10 1/8 W16 X 67
10 1/4W30 X 116
W10 X 7710 1/4
W16 X 77 W30 X 124
W10 X 88 W16 X 89 10 3/8 W30 X 132
W10 X 100 10 3/8 W16 X 100 10 3/4 — —
W10 X 112 10 1/2 — — — —
20
*Prices are FOB Damascus, Virginiaquantity discounts apply
600 Series Air HoistCapacities up to 600 lbs.*Pendant Throttle ControlHook Suspension Only
Top Hook Onlyfor lifts other than standard 10 ft. (add extra charges)Extra pendant hose (standard 6 ft.) $6/ft.Extra chain per ft. of lift $10.15 250/300 lbs. - $20.30 500/600 lbs.Maximum pendant drop is 36 ft.
600 Series Chain Container*
600 Series Bulk Load Chain*
600 Series Air HoistBUDGIT®
Air Wire Rope Manipulator *
* Prices are FOB Wadesboro, North Carolina
Hose Reels - See Crane Source Catalog
Capacity(lbs.)
CatalogNumber
NetWeight(lbs.)
Full LoadHoist Speed
(fpm)
Full LoadLowering Speed
(fpm)Parts of
Load Chain Price
250 931889
3031 83
1
1689
300 931890 1689
500 931892 21 55 1824
500 931894
3416 42
2
1878
600 931895 1878
1000 931897 11 29 2016
Catalog Number
NetWeight
Hoist Capacity250 & 300 lbs.
Hoist Capacity500, 600 & 1000 lbs. Price
2063 4 10 5 48
2064
5
20 10 54
2065 40 20 63
2066 80 40 69
2067 6 120 60 118
Capacitylbs. Description
Feet of Chainin Package
NetWeight
CatalogNumber Price
250, 300,500, 600& 1000
.157 BarDiameter
250 66 85018 2537.50
500 126 85019 5075.00
1000 244 85020 10150.00
ModelNumber
RatedProduct
Code
StandardCapacity
(lbs)
LiftingLift(ft)
AirSpeed(fpm)
Top HookConsump.
(cfm)
ShippingA
Dim.Weight
(lbs)UserPrice
TMM-140 17050 300 6.5 36 21.2 22¾ 20 2226
21
2200 Series Air Chain Hoists
Recommended options: Filter & Lubricator Regulator (if line pressure is over 110 PSI) Chain Container
If any 2200 series air hoist is ordered other than the standard above, the following model numbers will appear on the hoist and box.
2200 Series Air Hoist
Catalog Number Modifications
BAHC 2565 BAHC 25 65 Budgit Capacity Speeds (Lifting)
Air 25 = 1/4 ton (fpm)
Hoist 50 = 1/2 ton 65
01 = 1 ton 45
38 = 3/8 ton (SR) 23
75 = 3/4 ton (SR) 60
29
BUDGIT®
The following list of 2200 series catalog numbers are Budgit standard models, all with 10' lifts only.
2204 2216 2255 2251
2211 2219 2256
2212 2220 2259
2215 2243 2260
22
2200 Series Air Chain Hoists¼ - 1 Ton Capacities
Capacities 500 to 2000 PoundsPull Cord Control
* Price add-on for additional lift includes pull cords.
**Speeds based on 90 psi line pressure and with full rated hoist load. Hoist speeds are adjustable and can be reduced to 50% of full rated speed. Shipped from factory with hoisting speed set at maximum rated speed, lowering speed set at reduced speed.
Capacities 500 to 2000 PoundsPendant Throttle Control
Equipped with 6' pendant control hose assembly.Maximum pendant drop is 72 ft.
Add-on Prices For Other Than 10 Feet Lifts* Note: 10' lifts are standard, longer lifts available. Equipped with 6' pendant control hose. Speeds based on 90 psi line pressure with full rated hoist load. Rated air supply is 48 cfm (full load – full speed). Always install a filter and lubricator in air line for each hoist.
Add-on Prices for Other Than Standard 10' LiftsTo compute total price of hoist with other than standard 10' lift, add to the price of desired 10' lift hoist the additional charges as instructed below:
1. If control hose is to be lengthened, add the charge for each additional foot of hose over 6 feet.
2. If load chain is to be lengthened add the charge for each additional foot of lift over 10 feet.
Series 2200 Air Chain Hoists are Metric Rated except the Spark Resistant models.
Series 2200 Air
Hoists
When ordering always specify the following: Lift Pendant/pull cord drop
BUDGIT®
Metal chain containers are standard on all standard models for lifts up to 25' (1-part chain) and 22' (2-part chain) except for spark resistant or roller chain models which is not included. To price hoists with chain containers above standard lifts, deduct $97 for 1 part chain and $191 for 2 part chain from standard hoist list price and add the appropriate chain container on page 25.
Hook Suspension Lug Suspension
TypeCapacity
(tons)
Pull CordControl
**LiftingSpeedMax(fpm)
**Lowering
SpeedMax(fpm) Price Type
Capacity(tons)
Pull CordControl
**LiftingSpeedMax(fpm)
**Lowering
SpeedMax(fpm) Price
CatalogNumber
NetWt
(lbs)CatalogNumber
NetWt
(lbs)
Link ChainStandard
Model
1/41/21
221122152219
363649
654523
9512060
275427603394
Link ChainStandard
Model
1/41/21
225122552259
363649
654523
9512060
275427603394
Link ChainSpark and CorrosionResistant
3/83/4
22412243
3649
6029
10052
33984307
Link ChainSpark and CorrosionResistant
3/83/4
22812283
3649
6029
10052
33984307
RollerChain
1/41/21
220122032205
373751
654523
9512060
289128913548
Hook Suspension Lug Suspension
TypeCapacity
(tons)CatalogNumber
NetWt
(lbs)
**LiftingSpeedMax(fpm)
**Lowering
SpeedMax(fpm) Price Type
Capacity(tons)
CatalogNumber
NetWt
(lbs)
**LiftingSpeedMax(fpm)
**Lowering
SpeedMax(fpm) Price
Link ChainStandard
Model
1/41/21
221222162220
464659
654523
9512060
327032743908
Link ChainStandard
Model
1/41/21
225222562260
464659
654523
9512060
327032743908
Link ChainSpark and CorrosionResistant
3/83/4
22422244
4659
6029
10052
39224827
Link ChainSpark and CorrosionResistant
3/83/4
22822284
4659
6029
10052
39224827
RollerChain
1/41/21
220222042206
474761
654523
9512060
341534154073
Capacity(tons)
Standard ChainPlated Link
Chain
PendantHoseDrop(ft)
RollerChain
Models
LinkChain
Models
Add For Each
Additional Foot of Lift
1/4, 1/21
* 3/8 Spark Resistant* 3/4 Spark Resistant
28.9357.89
— —
13.9227.8252.61105.25
13.9227.8252.61105.25
5.87
23
6000 Series Air Chain Hoists
Recommended options: Filter & Lubricator Regulator (if line pressure is over 110 PSI)
If any 6000 series air hoist is ordered other than the standard above, the following model numbers will appear on the hoist and box.
EXAMPLE
6000 Series Air Hoist
Catalog Number Modifications
BAHC 0113 BAHC 01 13 Budgit Capacity Speeds (Lifting)
Air 50 = 1/2 ton (SR only) (fpm)
Hoist 01 = 1 ton 13
02 = 2 ton 30
03 = 3 ton 06
15
04
10
16 (SR)
08 (SR)
05 (SR)
BUDGIT®
The following list of 6000 series catalog numbers are Budgit standard models, all with 10' lifts only.
911641C 911651C
911642C 911652C
911644C 911694C
24
When ordering always specify the following: Lift Pendant dropStandard Pendant Control Drop is 6'.* Maximum pendant control drop is 36 ft.
6000 Series Air Chain Hoists½ - 3 Ton Capacities
Capacities 1 to 3 TonsPendant Throttle Control
Note: All 6000 Series hoists include a load brake.
Note: 10' lifts are standard, longer lifts available. Equipped with 6' pendant control hose. Speeds based on 90 psi line pressure with full rated hoist load. Rated air supply is 80 cfm (full load – full speed). Always install a filter and lubricator in air line for each hoist.
Add-on Prices for Other Than Standard 10' LiftsTo compute total price of hoist with other than standard 10' lift, add to the price of desired 10' lift hoist the additional charges as instructed below:
*1. If control hose is to be lengthened, add the charge for each additional foot of hose over 6 feet.
2. If load chain is to be lengthened add the charge for each additional foot of lift over 10 feet.
Series 6000 Air Chain Hoists are Metric RatedPolyethylene Chain containers are standard on all 6000 Series chain hoists (BAHC) 1 Ton for 28' lift or less, 2 Ton for 20' of lift or less and 3 Ton for 16' of lift or less except for spark resistant models which are not included. To price hoists with chain containers for lifts greater than the standard lifts mentioned, deduct $87 for 1 Ton, $141 for 2 Ton or $159 for 3 Ton from standard 10' list price, then add the appropriate fabric or metal chain container listed on page 10 or 11. On 1 Ton Hoists with lifts 18' or less, we will provide the #922440 chain container. Until January, 2009 a fabric chain container may be shipped in lieu of the Polyethylene at our discretion. Polyethylene Chain containers are designed to fit current 6000 series (BAHC) or newer models. For older 6000 series (BAH) models, a fabric or metal chain container must be used.
Add-on Prices for Other Than Standard 10' Lifts
Series 6000 Air
Hoists
BUDGIT®
Standard Models
Capacity(tons)
Load ChainPer Foot Lift
Plated Load Chain
Pendant Hose*Per Foot Lift
Each Additional Foot of Lift
HoistOnly
Hoist & AMDT
123
17.6635.3353.00
17.6635.3353.00
9.44 15.80
Spark and Corrosion Resistant Models
½12
77.86155.73233.59
---
9.44 15.80
Hook Suspension — Standard Models
Capacity(tons)
CatalogNumber
NetWt.
Full LoadHoist Speed
(fpm)
Full LoadLowering Speed
(fpm)
Parts ofLoad Chain Price
1911644C911641C
9799
1330
1842
142724379
2911645C911642C
114116
615
921
252595365
3911646C911643C
148150
410
614
361066212
Hook Suspension — Spark and Corrosion Resistant Models
½ 911683C 99 16 22 1 5419
1 911684C 116 8 11 2 6234
2 911685C 150 5 7 3 7624
Lug Suspension — Standard Models
Capacity(tons)
CatalogNumber
NetWt.
Full LoadHoist Speed
(fpm)
Full LoadLowering Speed
(fpm)
Parts ofLoad Chain Price
1911654C911651C
110112
1330
1842
142724379
2911655C911652C
120122
615
921
252595365
3911656C911653C
168170
410
614
361066212
Lug Suspension — Spark and Corrosion Resistant Models
½ 911693C 114 16 22 1 5419
1 911694C 124 8 11 2 6234
2 911695C 174 5 7 3 7624
25
Air Hoist Accessories
Air Motor-Driven Trolleys *Equipped with 7-foot pendant control hose.For longer than 7-foot control add $9.58/ft. (trolley only).Always specify the Hoist Catalog Number that will operate with the trolley.Models for Patented Track with narrow flat tread steel wheels are available.Models with extended Beam Flange Adjustment are available.Use the electric trolley beam flange adjustment pricing on page 6.Maximum pendant control drop is 36 ft.
Chain Containers for Air Hoists
Longer Lift Chain ContainersSeries 2200 Air Chain Hoists
*½ ton insert number 11 ton insert number 22 ton insert number 3
Link chain hoists using these long lift containers must be lug suspended, cross mounted.Chain containers are supported from the trolley suspension pins.Chain containers are low headroom design, 10½ inches wide.Chain container depth (S Dim.) for 6000 series chain hoist is the same as the electrics on page 10 & 11.
4 lever pendant throttle control is standard with all trolleys ordered with a 6000 series Air Hoist
For cloth chain container see pages 11For standard metal chain containers see pages 10 & 11
BUDGIT®
Standard
TrolleyCatalogNumber
Capacity(tons)
StandardFlange
Width Adj.
NetWt.(lbs)
TraverseSpeed(fpm) Price
911706911707911708
1/4, 1/2 &123
3 - 5"3-5/8" - 6-
1/4"4 - 6-1/4"
95105150
506060
328233473946
Spark and Corrosion Resistant
911710911711911712
3/8, 1/2, & 3/412
3 - 5"3-5/8" - 6-
1/4"4 - 6-1/4"
95105150
506060
414242094807
Standard Metal Chain Container for Series 2200 Air Hoists
CatalogNumber
ChainType
Maximum Lift in Feet
Wt.(lbs) Price
1/4, 3/8, 1/2 Ton
3/4, 1Ton
902631902635902632902633
LinkLink
RollerRoller
25451530
1222—15
4 1/29
6 1/211
97199155199
Spark and Corrosion Resistant Chain Containerfor Series 2200 Air Hoists
902634902636
Link2545
1222
510
415452
Cloth Chain Containers
702635 Link 45 22 9 137
Standard Link Chain
Part Number Suspension
Depth(S Dim.)
Maximum Lift
Price¼ & ½
Ton 1 Ton
444620-21 Hook or Lug 22 ½ 60 30 173
444620-26
Lug
28 ½ 75 37 248
444620-31 33 ½ 90 45 321
444620-35 37 ½ 105 52 350
Spark and Corrosion Resistant Link Chain
Part Number Suspension
Depth(S Dim.)
Maximum Lift
Price3/8 Ton 3/4 Ton
444551-21 Hook or Lug 22 ½ 60 30 602
444551-26
Lug
28 ½ 75 37 626
444551-31 33 ½ 90 45 657
444551-35 37 ½ 105 52 683
Spark & Corrosion Resistant Container for Series 6000 Air Hoists
CatalogNumber
Maximum Lift in FeetWt.(lbs)
userprice1/2 Ton 1 Ton 2 Ton
905444905445905446905447905448905449
153045607590
do not use1522303745
do not use1015202530
4810141516
379396482571624658
Spark and Corrosion ResistantLonger Lift Chain Containers for Series 6000
Chain Container Catalog Number
Maximum Lift In Feet
Price½ Ton 1 Ton 2 Ton
439425-*1SR 60 30 20 746
439425-*2SR 90 45 30 773
439425-*3SR 120 60 40 798
439425-*4SR 150 75 50 815
439425-*5SR 180 90 60 841
439425-*6SR 210 105 70 874
* Specify whether air motor trolley will be used with either 2200 series or 6000 series model at time of order
Polyethylene Chain Containers
CatalogNumber
ChainContainer Depth
Maximum Lift in ft. ListPrice1 ton 2 ton 3 ton
922440922441922442922443
10-3/1612-5/1615-13/1620-1/16
18284050
9142025
691316
8787141159
26
Catalog Number For Hose SizePriceEach
254 5/8" - 1½" Hose 31
Wire Rope Festoon SystemsFor Air supply hose ½" to 1" ID hose
CatalogSystemNumber
WorkingTravel
(ft)
LoopDepth
(ft)
OverallLength
(ft)Shipping
Wt. Price
90160116 3 18.5
11 292
21 4 23.5
90160228 3 31.1
13 43237 4 40.1
90160340 3 43.6
15 59352 4 55.6
Catalog Number Price
2268 80
Pendant Throttle Conversion KitKit for converting the pull cord Series 2200 BUDGIT Air Hoist to pendant throttle operation.
Catalog Number Price
2269 839
CatalogNumber
ID(in)
OD(in) Braid
Max.PSI
Wt./Ft.
Price(ft)
901610901611901612
1/23/41
15/161 1/41 1/2
122
200225200
0.330.520.65
2.883.345.18
FittingsMale swivel at each end
CatalogNumber
Hose ID(in)
Thread SizeM-NPT
Price(pair)
901614901615901616
1/23/41
3/81/23/4
374062
Fittings With Quick DisconnectQuick disconnect on one end-standard male swivel on opposite end
CatalogNumber
Hose ID(in)
Thread SizeM-NPT
Price(pair)
901618901619901620
1/23/41
3/81/23/4
5980
137
Air Hoist Accessories
Air Hose AssemblyAssembly requires Catalog Number for both hose and fittings.
Air Hose Trolleys - 2-5/8" - 6" flange
Filter-Lubricator Units
For longer than 6" ft. pendant hose, add $5.98 per foot.
Recoil Air HoseSelf-Storing Air Hose with Fittings
Redundant SupportHoist Suspension redundant support for Series 2200 Hoist
System Includes: End clamp assemblies, Hardware Kit, Intermediate carriers (quantities based upon overall length). Nylon covered wire rope per required length.
2200 Series Lug KitConverts hook mount to lug
* Not for use with 6000 Series Air Hoist.
BUDGIT®
CatalogNumber
HoseSize
(ID in) X
WorkingLength
(ft) Fittings Each End Price
901621901622
1/21/2
xx
1525
3/8 NPTF MaleSwivel Fittings
110137
901624901625901626
3/43/43/4
xxx
152550
3/4 NPTF MaleSwivel Fittings
220274440
Nylon coated cable with eyebolt fittings each end for supporting recoil air hose (supports by others).
CatalogNumber
Length(ft) Price
901629901630
2550
5997
Filter-Lubricator Units
CatalogNumber
Inlet/Outlet Size (in) Bowl Size
ShippingWt. Price
* 902960* 902961 902962 902963
3/8 (2200 Series)1/2 (AMDT)
3/4 (6000 Series)1
11 oz.11 oz.24 oz.24 oz.
671115
199237440440
Filter-Regulator-Lubricator Units
CatalogNumber
Inlet/Outlet Size (in) Bowl Size
ShippingWt. Price
* 902966* 902967 902968 902969
3/8 (2200 Series)1/2 (AMDT)
3/4 (6000 Series)1
11 oz.11 oz.24 oz.24 oz.
14152020
292358605605
Catalog NumberCapacity
(tons) Price
22185610 1/4, 1/2 and 3/8 77
22412301 3/4 and 1 137
27
Air Hoist AccessoriesBUDGIT®
Supplemental, External Muffler, In addition to our standard internal mufflers Price
Series 2200 Air Chain Hoist.................................................................................................................................................................Series 6000 Air Chain Hoist or Air Motor Driven Trolley..............................................................................................................each
170438
Deduct Two Lever Pendant Throttle Control, pendant by others
Series 2200 Air Chain Hoist.................................................................................................................................................................Series 6000 Air Chain Hoist or Air Motor Driven Trolley..............................................................................................................each
-(190)-(193)
Add Six Lever Pendant to Trolley & Hoist............................................................................................................................................Add Four Lever Pendant to Trolley without hoist.................................................................................................................................Add Four Lever Pendant to 2200 with Motor Driven Trolley.................................................................................................................
1588667548
Zinc Plated Hooks
2200 Series - Add per hook.................................................................................................................................................................6000 Series - Add per hook.................................................................................................................................................................
6043
Drop Stops (safety lugs) and bumpers for AMDT & Heavy Duty Rigid Mount Trolleys
Drop Stops (steel only)........................................................................................................................................................................Drop Stops with Rubber Bumpers.......................................................................................................................................................
290582
Patented Track Wheels Air Motor Driven Trolleys, 3¼ inch minimum flange width
Standard Trolley...................................................................................................................................................................................Spark Resistant Trolley.........................................................................................................................................................................
366765
Food Grade Lubrication Hoists
Series 2200 Air Chain Hoist.................................................................................................................................................................Series 6000 Air Chain Hoist.................................................................................................................................................................
N/C 107
Epoxy Enamel Paint, three coat system per data sheet
Each Hoist, Trolley & Chain Container combination............................................................................................................................ 606
Rigid Top Hook - not available on spark resistant units
Series 2200..........................................................................................................................................................................................Series 6000 1 & 2 Ton.........................................................................................................................................................................Series 6000 3 Ton................................................................................................................................................................................
3826128
Relabeling of 2200 series hoist capacity.............................................................................................................................................. 142
Derate and Reset Clutch - 6000 Series............................................................................................................................................... 222
Trolley Travel Limit Switch (trip dog by others).....................................................................................................................................
2416
28
Underhung & Top RunningPush Type Bridge Crane Kits
Push Type Underhung
Push Type Top Running*
End connection kit sold separately #51525050 $170 listFor complete specifications, see Bulletin # CS/L-1003-0206.
*Wheels are designed to be run on ASCE rail only, for square bar applications contact factory.
BUDGIT®
CatalogNumber
RunwayBeam Flange
Adjustment Range
MaximumCapacity
(tons)
MaximumSpan
(ft) Remarks
KitWeight
(lbs) Price
Angle Construction Trucks
905360
3" - 8"
1/2 30Pressed Steel Wheels
300
848
9053601 24
848
905360SR Spark Resistant Wheels 2396
9053613 3/8" - 8"
2 30
Pressed Steel Wheels 310 943
905362 Forged Steel Wheels
320
1442
905362PT 3 1/4" Patented Track Wheels 1825
905362SR 3 3/8" - 8" Spark Resistant Wheels 3226
Channel Construction Trucks
905368 3 3/8" - 5 1/2"
336
Forged Steel Wheels
380 1825
905368W1 5 1/2" - 8" 390 2006
905368W2 8" - 10 1/2" 400 2083
905368SR 3 3/8" - 5 1/2" Spark Resistant Wheels380
3574
905368PT 3 1/4" Patented Track Wheels 2234
905368S 3 3/8" - 5 1/2" 24 3' - 0" Short Wheelbase 330 2547
905524 4" - 6 1/4"
536
Forged Steel Wheels
550 3035
905524W1 6 3/8" - 9" 560 3243
905524W2 9" - 11 1/2" 570 3336
905524PT 3 1/4" Patented Track Wheels550
3606
905524SR4" - 6 1/4"
Spark Resistant Wheels 4897
905524S 24 3' - 0" Short Wheelbase 495 3758
CatalogNumber
Maximum Capacity(tons)
Maximum Span(ft) Remarks
ShippingWt. (lbs) Price
904535
5
368" Ductile Iron Wheels
4502440
904535SR 8" Spark Resistant Wheels 7693
904535S 248" Ductile Iron Wheels
3' - 0" Short Wheel Base405 3164
29
UnderhungHand Geared Bridge Crane Kits
Kit Consists of: 904550 Hand Chain Wheel 2 End Trucks - (1 pair) Components Detailed in Application Guide 36' Hand Chain Cross Shaft Support as noted above * For flange widths of 5-1/2" - 8" add $254 1 Hand Chain Link Cross Shaft Coupling as noted above * For flange widths of 8" - 10-1/2" add $325 * For patent track add $390 **For flange widths of 6-3/8" - 9" add $260 **For flange widths of 9" - 11-1/2" add $490 **For patent track add $673
Spark Resistant
Standard kit hand chain is zinc plated, 36' long. Additional hand chain per lineal ft. add $4.33. Spark resistant kit hand chain aluminum, 36' ft. long. Additional spark resistant hand chain per lineal ft. add $9.75 .
Hand Geared Underhung - For Runway Flange Widths of 3-3/8" - 5-1/2" for 3 Max Tons *
Standard For Runway Flange Widths of 4" - 6-1/4" for 5 Max Tons **
Note: Bridge Beam not Included in Kit
BUDGIT®
MaxCapacity
(tons)
MaxSpan
(ft)Kit
NumberList
Price Weight
End TruckCatalogNumber
Kit Consists of:
Cross Shaft Support Cross Shaft Coupling
QtyCatalogNumber Qty
CatalogNumber
3
15 B03/15UHG 3013 440
905369*4' - 6" WB
1
905373
2
905374
22 B03/22UHG 3106 442 2 2
29 B03/29UHG 3251 446 3 3
36 B03/36UHG 3342 448 4 3
5
15 B05/15UHG 3966 520
905525**4' - 6" WB
1 2
22 B05/22UHG 4057 522 2 2
29 B05/29UHG 4203 526 3 3
36 B05/36UHG 4295 528 4 3
MaxCapacity
(tons)
MaxSpan
(ft)Kit
NumberList
Price Weight
End TruckCatalogNumber
Kit Consists of:
Cross Shaft Support Cross Shaft Coupling
QtyCatalogNumber Qty
CatalogNumber
3
15 B03/15UHGSR 4534 480
905369SR4' - 6" WB
1
905373
2
905374
22 B03/22UHGSR 4626 482 2 2
29 B03/29UHGSR 4771 486 3 3
36 B03/36UHGSR 4863 488 4 3
5
15 B05/15UHGSR 6047 570
905525SR4' - 6" WB
1 2
22 B05/22UHGSR 6139 572 2 2
29 B05/29UHGSR 6283 576 3 3
36 B05/36UHGSR 6375 578 4 3
30
Hand Geared Top RunningStandard
Top-RunningHand Geared Bridge Crane Kits
Kit Consists of: 904550 Hand Chain Wheel 2 End Trucks - (1 pair) 36' Hand Chain Cross Shaft Support as noted above 1 Hand Chain Link Cross Shaft Coupling as noted above
Spark Resistant
End connection kit sold separately 51525050 $162 List
Standard kit hand chain is zinc plated, 36' long. Additional hand chain per lineal ft. add $4.33. Spark resistant kit hand chain aluminum, 36' ft. long. Additional spark resistant hand chain per lineal ft. add $9.75.
Wheels are designed to be run on ASCE rail only, for square bar applications contact factory.
BUDGIT®
MaxCapacity
(tons)
MaxSpan
(ft)Kit
NumberList
Price Weight
End TruckCatalogNumber
Kit Consists of:
Cross Shaft Support Cross Shaft Coupling
QtyCatalogNumber Qty
CatalogNumber
5
15 B05/15TH 3766 500
9045364' - 6" WB
1
904540
2
90537422 B05/22TH 3858 515 2 2
29 B05/29TH 4003 532 3 3
36 B05/36TH 4095 549 4 3
5
15 B05/15THSR 9299 550
904536SR4' - 6" WB
1
904540
2
90537422 B05/22THSR 8403 565 2 2
29 B05/29THSR 9536 582 3 3
36 B05/36THSR 9628 599 4 3
31
UnderhungMotorized Bridge Crane Kits
Motor Driven with Single Drive Underhung - For Runway Flange Width of 3-3/8" - 5-1/2" **
*Specify: 1=Single Speed Kit Consists of: 2 End Trucks - (1 pair) 1 Reducer 2=Two Speed 1 Motor 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1) Cross Shaft Support as noted above Cross Shaft Coupling as noted aboveSpecify Voltage when ordering - Add $302 to kit price for single phase onlyComponents Detailed in Application Guide**For flange widths of 5-1/2" - 8" add $254 **For flange widths of 8" - 10-1/2" add $325 **For Patented Track add $390
Motor Driven with Single Drive Underhung - For Runway Flange Width of 4" - 6-1/4" **
*Specify: 1=Single Speed Kit Consists of: 2 End Trucks - (1 pair) 1 Reducer 2=Two Speed 1 Motor 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1) Cross Shaft Support as noted above Cross Shaft Coupling as noted above
Specify Voltage when ordering - Add $302 to kit price for single phase onlyComponents Detailed in Application Guide**For flange widths of 6-3/8" - 9" add $260 **For flange widths of 9" - 11-1/2" add $490 **For Patented Track add $673
BUDGIT®
MaxCapacity
(tons)
MaxSpan
(ft)Speed(fpm)
KitNumber
List Price Weight
End TruckCatalog Number
Kit Consists Of:
1 Speed 2 Speed 1 Speed 2 Speed
Cross Shaft
Support
Cross Shaft
CouplingDrive(hp)
1/4thru
3
8
55 B03/08UC*55 4313 4585
524 544
9053694' - 6" WB
0
2
1/2
70 B03/08UC*70 4313 4585
110 B03/08UC*110 4313 4585
15
55 B03/15UC*55 4404 4673
544 564 170 B03/15UC*70 4404 4673
110 B03/15UC*110 4404 4673
22
55 B03/22UC*55 4496 4761
564 584 270 B03/22UC*70 4496 4761
110 B03/22UC*110 4496 4761
29
55 B03/29UC*55 4642 4901
586 606 3
3
70 B03/29UC*70 4642 4901
110 B03/29UC*110 4642 4901
36
55 B03/36UC*55 4734 4989
606 626 470 B03/36UC*70 4734 4989
110 B03/36UC*110 4734 4989
MaxCapacity
(tons)
MaxSpan
(ft)Speed(fpm)
KitNumber
List Price Weight
End Truck Catalog Number
Kit Consists Of:
1 Speed 2 Speed 1 Speed 2 SpeedCross Shaft
Support
Cross Shaft
CouplingDrive(hp)
5
8
50 B05/08UC*50 5265 5501
524 544
9055254' - 6" WB
0
2
1/2
65 B05/08UC*65 5265 5501
100 B05/08UC*100 5265 5501
15
50 B05/15UC*50 5357 5589
544 564 165 B05/15UC*65 5357 5589
100 B05/15UC*100 5357 5589
22
50 B05/22UC*50 5449 5677
564 584 265 B05/22UC*65 5449 5677
100 B05/22UC*100 5449 5677
29
50 B05/29UC*50 5594 5817
586 606 3
3
65 B05/29UC*65 5594 5817
100 B05/29UC*100 5594 5817
36
50 B05/36UC*50 5686 5905
606 626 465 B05/36UC*65 5686 5905
100 B05/36UC*100 5686 5905
32
UnderhungMotorized Bridge Crane Kits
Motor Driven with Dual Drive Underhung - 36' Span Kit - For Runway Flange Width of 3-3/8" - 5-1/2" ** 48' Span Kit for Runway Flange Width 4"-6¼" †
*Specify: 1=Single Speed Kit Consists of: 2 End Trucks - (1 pair) 2 Reducers 2=Two Speed 2 Motors 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1)
Specify Voltage when ordering - Single Phase not availableComponents Detailed in Application Guide** For flange widths of 5-1/2" - 8" add $254** For flange widths of 8" - 10-1/2" add 325** For Patented Track add 390† For Flange Widths of 6-3/8" - 9" add 260† For Flange Widths of 9" - 11-1/2" add 490
*Specify: 1=Single Speed Kit Consists of: 2 End Trucks - (1 pair) 2 Reducers 2=Two Speed 2 Motors 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1)
Specify Voltage when ordering - Single Phase not availableComponents Detailed in Application Guide**For flange widths of 6-3/8" - 9" add $260**For flange widths of 9" - 11-1/2" add $490**For Patented Track add $673
Motor Driven with Dual Drive Underhung With 4'-6" WB - For Runway Flange Width of 4" - 6-1/4" **
Control Panel Options
BUDGIT®
MaxCapacity
(tons)
MaxSpan
(ft)Speed(fpm)
KitNumber
List Price Weight End Truck Catalog Number
Drive(hp)1 Speed 2 Speed 1 Speed 2 Speed
1/4thru
3
36
55 B03/36UD*55 5181 5874
545 565905369
4'-6" WB(2) 1/270 B03/36UD*70 5181 5874
110 B03/36UD*110 5181 5874
48
55 Not Available
70 B03/48UD*70 6596 7288645 665
9053806'-0" WB
(2) 1/2110 B03/48UD*110 6596 7288
MaxCapacity
(tons)
MaxSpan
(ft)Speed(fpm)
KitNumber
List Price Weight End Truck Catalog Number
Drive(hp)1 Speed 2 Speed 1 Speed 2 Speed
5 36
50 B05/36UD*50 6133 6826
665 685 905525 (2) 1/265 B05/36UD*65 6133 6826
100 B05/36UD*100 6133 6826
To Eliminate Panel and Disconnect Deduct
1 Speed 2 Speed
-(919) -(1137)
To Upgrade to NEMA 4 - Add: 754
33
Top RunningMotorized Bridge Crane Kits
*Specify: 1=Single Speed Kit Consists of: 2 End Trucks - (1 pair) 1 Reducer 2=Two Speed 1 Motor 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1) Cross Shaft Support as noted above Cross Shaft Coupling as noted above
Motor Driven with Single Drive - Top Running
*Specify: 1=Single Speed Kit Consists of: 2 End Trucks - (1 pair) 2 Reducers 2=Two Speed 2 Motors 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1)
Motor Driven with Dual Drive - Top Running
End connection kit sold separately 51525050 $162 List
Specify Voltage when ordering - Add $302 to kit price for single phase onlyComponents Detailed in Application Guide
Wheels are designed to be run on ASCE rail only, square bar applications are available upon request.
Square bar requirements; width 40mm maximum (1½" maximum), height 40 mm minimum (1½" minimum).
End connection kit sold separately 51525050 $162 List
Specify Voltage when ordering - Single Phase not availableComponents Detailed in Application Guide
Wheelbase exceeding 54" - line shaft drive applicable on 36' span and below only
Control Panel Options
BUDGIT®
MaxCapacity
(tons)
MaxSpan
(ft)Speed(fpm)
KitNumber
List Price Weight
End Truck Catalog Number
Kit Consists Of:
1 Speed 2 Speed 1 Speed 2 Speed
Cross Shaft
SupportCross Shaft
CouplingDrive(hp)
1thru
5
8
50 B05/08TC*50 4884 5349
529 554
9045364' - 6" WB
0
2
1/2
70 B05/08TC*70 4884 5349
100 B05/08TC*100 4884 5349
15
50 B05/15TC*50 4975 5440
544 569 170 B05/15TC*70 4975 5440
100 B05/15TC*100 4975 5440
22
50 B05/22TC*50 5067 5532
559 584 270 B05/22TC*70 5067 5532
100 B05/22TC*100 5067 5532
29
50 B05/29TC*50 5213 5677
576 601 3
3
70 B05/29TC*70 5213 5677
100 B05/29TC*100 5213 5677
36
50 B05/36TC*50 5305 5769
591 616 470 B05/36TC*70 5305 5769
100 B05/36TC*100 5305 5769
MaxCapacity
(tons)
MaxSpan
(ft)Speed(fpm)
KitNumber
List Price Weight End Truck Catalog Number
Drive(hp)1 Speed 2 Speed 1 Speed 2 Speed
1thru
5
36
50 B05/36TD*50
5752 6453 575 615904536
4'-6" WB(2) 1/270 B05/36TD*70
100 B05/36TD*100
48
50 Not Available
70 B05/48TD*706591 7370 675 715
9045496'-0" WB
(2) 3/4100 B05/48TD*100
To Eliminate Panel and Disconnect Deduct
1 Speed 2 Speed
-(919) -(1137)
To Upgrade to NEMA 4 - Add: 754
34
Individual Crane Components& Options
Underhung
BUDGIT®
CatalogNumber Description
Wt.(lbs)
List Price
CatalogNumber
RunwayBeam Flange Remarks
Wt.(lbs)
List Price
Underhung End Trucks - (1 pair)
905369905369W1905369W2905369SR905369PT905369S905380905380W1905380W2
3-3/8" - 5-1/2"5-1/2 - 8"
8" - 10-1/2"3-3/8" - 5-1/2"
3-1/4"3-3/8" - 5-1/2"
4" - 6-1/4"6-3/8 - 9"
9" - 11-1/2"
Standard - 3 tonWider FlangeWider FlangeSpark ResistantPatented Track3'-0" Short Wheelbase6'-0" WheelbaseWider FlangeWider Flange
440450460440440390540550560
243427012776384328433156392342064299
905525905525W1905525W2905525SR905525PT905525S
4" - 6-1/4"6-3/8 - 9"
9" - 11-1/2"4" - 6-1/4"
3-1/4"4" - 6-1/4"
Standard - 5 tonWider FlangeWider FlangeSpark ResistantPatented Track3'-0" Short Wheelbase
560570580560560505
343637103952543541444297
Patented Track, Spark Resistant Underhung End Trucks - (1 pair)
905369PTSR905525PTSR
3 Ton Geared5 Ton Geared
434510383
Drive Components Wt. Price
9053749053739045508282
8282SR
Cross Shaft CouplingCross Shaft SupportHand Chain Wheel for Budgit TrucksHand Chain 36 lineal feetHand Chain 36 lineal ft. Spark Resistant
220101816
5697365164356
Gear Reducers
Catalog No.
Traverse Speed ShipWt. Price3 Ton 5 Ton
905376905377905378
110 fpm GR - 10:170 fpm GR - 15:155 fpm GR - 20:1
100 fpm GR - 10:165 fpm GR - 15:150 fpm GR - 20:1
20753
(each)
Electrical and Control Options Wt. Price
Warning HornNEMA 4 Travel Limit Switch (Trip Dogs by Others)
6831067
Electronic Acceleration Control (EAC) — 115 volt control
904596
904598
913186
Single Speed .75 HP Max 208-230 - 3 - 60 2 HP Max 460 - 3 - 60Two Speed .75 HP Max 208-230 - 3 - 60 2 HP Max 460 - 3 - 60Single Speed or Two Speed 2 HP Max 208-230-3-60
10
357
456
681
Bridge Brakes
904554904555904556
3 ft. lb.Adjustable Brake
120/240 - 1 - 60230/460 - 3-60575 - 3 - 60
15456
(each)
Motor Protection Wt. Price
TAS
TOL
Temperature Actuated Switch in Motor WindingThermal overload relays (3 phase) in enclosure
—
25
Std.
203
CatalogNumber Horse Power Power Supply
Wt.(lbs)
List Price
Motor - Single Speed328795-32328795-33
.5 HP-1800 RPM208-230/460-3-60575 - 3 - 60
2525
274
Motor - Half-Speed Single Speed (provides traverse speed 50% of that listed)
328795-26328795-27
.25 HP 900 RPM230/460-3-60575 - 3 - 60
30 436
Motor - Two Speed - slow speed is one third of listed speed328796-24328796-25328796-26328796-27
.5/.17 HP1800/600 RPM
200-208-3-60230 - 3 - 60460 - 3 - 60575 - 3 - 60
45 523
Motors - Single Phase - single motor - single speed only
328797-22.5 HP1800 RPM
115/230 - 1 - 60 30 554
CatalogNumber Description
Wt.(lbs)
List Price
Control Panels - Single Speed - (3 ph Underhung)
446003134460031444600311
460v - 3 ph - 60 Hz - 905386575v - 3 ph - 60 Hz - 905387208-230v - 3 ph - 60 Hz (1 hp) - I.D.
202050
673
Control Panels - Single Phase - (1 ph Underhung)
4460030544600315
115v - 1 ph - 60 Hz - 905364230v - 1 ph - 60 Hz - 905365
20 724
Control Panels - Two Speed - (3 ph Underhung)
446003434460034444600351
460v - 3 ph - 60 Hz - 905398575v - 3 ph - 60 Hz - 905399208-230v - 3 ph - 60 Hz (1 hp) - I.D.
252550
903
Fused Disconnect Switch - Standard Wt. Price
905388905389
208-230v - 3 ph - 60 Hz460-575v - 3 ph - 60 Hz
10203294
Fused Disconnect Switch - Single Phase
905366905367
115v - 1 ph - 60 Hz230v - 1 ph - 60 Hz
10 240
Weatherproofing (add for each enclosure) Wt. Price
NEMA 4/12
NEMA 7 or 9
Watertight and dust-tight for indoor and outdoor service............Apply to factory
20—
343—
Bridge Bumpers Wt. Price
932000 Rubber Bumpers - Underhung 20 78
Air Motor Drive Package Wt. Price
904558
Includes air motor, gear reducer, control head with pendant throttle and hose assembly with 8 ft. hose drop. Traverse speed approx. 70 fpm. Requires catalog 902967 filter- regulator-lubricator mounted near air motor. For additional pendant hose over 8' - 0" Add per foot ...................
1153556
9.48
35
Individual Crane Components& Options
Top Running
BUDGIT®
CatalogNumber Description
Wt.(lbs)
List Price
Top Running End Trucks - (1 pair)
904536904536SR904536S904549904549SR
StandardSpark Resistant Wheels3' - 0" Short Wheelbase6' - 0" WheelbaseSpark Resistant Wheels
450450395550550
30358859375835199071
Drive Components
90454090537490455082828282SR
Cross Shaft SupportCross Shaft CouplingHand Chain WheelHand ChainSpark Resistant Hand Chain
202101816
9756365164356
Gear Reducers
905376905377905378
Traverse Speed 100 fpm GR - 10:1Traverse Speed 70 fpm GR - 15:1Traverse Speed 50 fpm GR - 20:1
20753
(each)
Ballast Resistors (single drive only)
905391905392905393
SS and 2S 208-230 - 3 - 60SS and 2S 460 - 3 - 60SS and 2S 575 - 3 - 60
10 300
CatalogNumber Horse Power Power Supply
Wt.(lbs)
List Price
Motors - Single Speed
328795-32328795-33
.5 HP-1800 RPM208-230/460-3-60575 - 3 - 60
25 274
328795-42328795-43
.75 HP-1800 RPM208/230/460-3-60575-3-60
25 324
Motors - Half-Speed Single Speed (provides traverse speed 50% of that listed)328795-26328795-27
.25 HP 900 RPM208-230/460-3-60575 - 3 - 60
30 436
Motors - Two Speed - slow speed is one third of listed speed
328796-24328796-25328796-26328796-27
.5/.17 HP1800/600 RPM
200-208-3-60230 - 3 - 60460 - 3 - 60575 - 3 - 60
45 523
328796-34328796-35328796-36328796-37
.75 HP-1800/600 RPM
200-208-3-60230-3-60460-3-60575-3-60
45 616
Motors - Single Phase - single motor - single speed only
328797-22.5 HP1800 RPM
115/230 - 1 - 60 30 554
CatalogNumber Description
Wt.(lbs)
List Price
Control Panel -Single Speed (3 ph Top-Run)446003264460038344600384
208-230v - 3 ph - 60 Hz - 904541460v - 3 ph - 60 Hz - 904542575v - 3 ph - 60 Hz - 904543
20
673
446003294460032744600328
208-230v - 3 ph - 60 Hz - 3/4 hp motor460v - 3 ph - 60 Hz - 3/4 hp motor575v - 3 ph - 60 Hz - 3/4 hp motor
731
Control Panel - Two Speed (3 ph Top-Run)
446003364460039344600394
208-230v - 3 ph - 60 Hz - 904546460v - 3 ph - 60 Hz - 904547575v - 3 ph - 60 Hz - 904548
25
912
446003394460033744600338
208-230v - 3 ph - 60 Hz - 3/4 hp motor460v - 3 ph - 60 Hz - 3/4 hp motor575v - 3 ph - 60 Hz - 3/4 hp motor
969
Control Panel - Single Phase Single Speed (1 ph Top-Run)
4460030544600315
115v - 1 ph - 60 Hz - 904544230v - 1 ph - 60 Hz - 904545
20 724
Fused Disconnected Switch
Standard
905388905389
208-230v - 3 ph - 60 Hz460-575v - 3 ph - 60 Hz
1010
203294
Single Phase
905366905367
115v - 1 ph - 60 Hz2304v - 1 ph - 60 Hz 10 240
Weatherproofing (add for each enclosure) Wt. Price
NEMA 4/12
NEMA 7 or 9
Watertight and dust-tight for in-door and outdoor service...............Apply to factory
20—
343—
Bridge Bumpers Wt. Price
932000 Rubber Bumpers - Underhung 20 78
Electrical and Control Options Wt. Price
Warning HornNEMA 4 Travel Limit Switch (Trip Dogs by Others)
6831067
Electronic Acceleration Control (EAC) — 115 volt control
904596
904598
913186
Single Speed .75 HP Max 208-230 - 3 - 60 2 HP Max 460 - 3 - 60Two Speed .75 HP Max 208-230 - 3 - 60 2 HP Max 460 - 3 - 60Single Speed or Two Speed 2 HP Max 208-230-3-60
10
357
456
681
Bridge Brakes
904554904555904556
3 ft. lb.Adjustable Brake
120/240 - 1 - 60230/460 - 3-60575 - 3 - 60
15456
(each)
Motor Protection Wt. Price
TAS
TOL
Temperature Actuated Switch in Motor WindingThermal overload relays (3 phase) in enclosure
—
25
Std.
203
Air Motor Drive Package Wt. Price
904558
Includes air motor, gear reducer, control head with pendant throttle and hose assembly with 8 ft. hose drop. Traverse speed approx. 70 fpm. Requires catalog 902967 filter- regulator-lubricator mounted near air motor. For additional pendant hose over 8' - 0" Add per foot ...................
1153556
9.48
36
Crane Component OptionsNEMA 4/12 Control Panels
Variable Frequency NEMA 4/12 Panel with Built In DisconnectFor Bridge Traverse Motions
Speed range up to 20:1 (in F.P.M.)
Price Includes;
Feature 1 h.p. Electromotive P3 CMAA Service Class C NEMA 4/12 Panel 20 X 16 X 8.5 Control Steps 2-step or 3-step infinitely variable Mainline Contactor 30 Amp Control Transformer 75VA Disconnect with Panel Mounted Handle 30 Amp External Dynamic Braking Resistor Yes Fuses Yes Hinge Point Horizontal at bottom of panel
One & Two Speed NEMA 4/12 Panels with Built in Disconnect(Standard NEMA1 Panels & Disconnects are on pages 34 & 45)
For Bridge Traverse Motions
Price Includes;
Feature 1 h.p. NEMA 4/12 Panel 20 X 16 X 8.8" Mainline Contactor 30 Amp** Control Transformer 115V/75VA Disconnect with Panel Mounted Handle 30 Amp** Fuses Yes Hinge Point Horizontal at bottom of panel
** Please check the total amperage draw requirements for your crane application so the amperage limits of the mainline contactor and disconnect are not exceeded. Especially on 230 volt applications.
Not available in 575 voltConsult factory for ¾ hp dual drive end trucks
BUDGIT®
Power SupplyMaximumTotal H.P.
MaximumFull Load Amps
Wt.(lbs)
CatalogNumber
ListPrice
230 Volts 1 5.0
50
44855021 2350
460 Volts 1 3.4 44855041-41 2447
230 Volts 2 8.0 448550-22 2541
460 Volts 2 3.4 448550-42 2447
MaximumTotal H.P.
List Prices For:
1 - Speed Panels
230 volts Catalog Number 460 volts Catalog Number 575 volts Catalog Number Weight (lbs)
1 1466 444231-21 1466 444231-41 1466 444231-51 75
MaximumTotal H.P.
2 - Speed Panels
230 volts Catalog No. 460 volts Catalog No. 575 volts Catalog No. Weight (lbs.)
1 1519 444232-21 1519 444232-41 1519 444232-51 85
37
Tractors
Tractor & Accessories ** Single unit for Monorail HoistsCapacities to 5 Tons
Standard unit is adjustable for standard I-beams and flat flange beams from 3.38" to 8" wide.
Tractors to operate on curved beams (36" minimum radius or larger) requires flangless wheels and guides rollers. Add $437 to list price.
Standard Pricing Includes Transformer, Control Fuse, 2 Button Pushbutton Station, 10 ft. Drop Cable and Strain Relief Chain.
Note: Specify Required Voltage, Phase, Frequency and Beam Size when ordering.
Prices are for three phase, for single phase see Options & Accessories.
Standard voltage is 230/460/3/60
For options or accessories not listed, consult factory for pricing and availability* When ordering, add "T" in front of single unit catalog number.Example: TBTD-235
**Prices are FOB Lisbon, Ohio
Note: Not CSA Approved
Note: 575/3/60 not ULC listed
BUDGIT®
Capacity SpeedCatalog Number Price
2000
35 BTD-235
2248
55 BTD-255
70 BTD-270
105 BTD-2105
3000
35 BTD-335
55 BTD-355
70 BTD-370
105 BTD-3105
5000
35 BTD-535
55 BTD-555
70 BTD-570
600035 BTD-635
55 BTD-655
10000 35 BTD-1035
Tractor Options & Accessories Price
Motor Brake 563
24V Controls (inlieu of standard 115V) 153
Mainline Contactor (does not include button) 305
Motor Fuses, Holder, Enclosure 332
Soft-start With Enclosure 501
4-Button Push Assembly 379
6-Button Push Assembly 551
8-Button Push Assembly 663
Extra Pushbutton cable (includes strain relief) Per ft. 4.65
Delete 2-button pendant station, deduct -67
Delete single speed controls, deduct -198
Twin unit for Underhung Bridges* (3 phase power only) 4232
NEMA 4 Panel 279
Single Phase (not available on 35 fpm models) 332
2 Speed Adder (not on 35 fpm) 760
Patented Track (straight track only) 110
12" Tow Bar 107
Drop Lug 202
575/3/60 131
38
Series USA Hand Chain Hoists
If any USA Manual Chain hoist is ordered other than the standard above, the following model numbers will appear on the hoist and box.
USA Manual Chain Hoist
Catalog Number Modifications
USA 01 USA 01 USA Manual Capacity
Chain Hoist 25 = 1/4 ton
50 = 1/2 ton
01 = 1 ton
15 = 1½ ton
02 = 2 ton
03 = 3 ton
04 = 4 ton
05 = 5 ton
06 = 6 ton
BUDGIT®
The following list of USA Manual chain hoist catalog numbers are Budgit standard models.
8259 8261B 8262 8263B
8259E 8261C 8262B 8263SR
8259Z 8261D 8262D 8263Z
8260 8261G 8262SR 8264Z
8260Z 8261SR 8262Z 8266
8261 8261Z 8263 8307
39
Series USA Hand Chain Hoists
Capacities ¼ to 6 tons - Metric Rated Except for Spark Resistant ModelsEquipped with Hook Latches. Standard lift is 8 ft. Hand chain can drop approximately 1½ ft. above fully extended hook.
Lifts longer than Standard
Notice: MILITARY SPECIFICATIONS — BUDGIT Aluminum Chain Blocks and Track Clamps are on the Qualified Products List QPL-904 for military specifications. Contact factory for prices and delivery. FURNISH COMPLETE ORDERING DATA REQUIREMENTS.
Load Chain OptionSpecify for plated load chain in Hand Chain Hoists.
*Hand chain for ¼ and ½ ton spark resistant model units is everdur bronze, while the standard hand chain for spark resistant 1 - 6 ton models is aluminum. Standard hand chain drop is approximately 1½ feet above the full extended load hook.
BUDGIT®
Standard Models (Hook Suspended Models)
CatalogNum-ber
LiftingCapacity
(tons) Price
Extra for Each Additional Foot of Lift
NetWt.(lbs)
Lift(ft)
Load &Hand Chain
Load ChainOnly
Hand Chain OnlyPer Foot of
Drop
826082618262825982638264826582668267
¼½1
1½23456
733733861117713191823219425902609
18.6018.6021.7523.0523.0537.1937.1951.3451.34
10.2910.2912.8514.1514.1528.2928.2942.4442.44
8.318.318.908.908.908.908.908.908.90
25½25½33½505075
75½105106
8
Spark & Corrosion Resistant Models (Hook Suspended)
CatalogNum-ber
LiftingCapacity
(tons) Price
Extra for Each Additional Foot of Lift *
NetWt.(lbs)
Lift(ft)
Load & Hand Chain
Load ChainOnly
Hand Chain OnlyPer Foot of
Drop
8260SR8261SR8262SR8259SR8263SR8264SR8265SR8266SR8267SR
¼½1
1½23456
163516351769224323464224459762456275
79.4579.4568.1891.9091.90164.54164.54237.17237.17
48.9148.9148.9172.6372.63145.27145.27217.90217.90
30.5430.5419.2719.2719.2719.2719.2719.2719.27
25½25½33½505075
75½105106
8
CatalogNumber
Capacity(tons)
Lift(ft) Price
8260 B8260 C8260 D8260 E8260 F8260 G
¼
101215202530
77080786395610491142
8261 B8261 C8261 D8261 E8261 F8261 G
½
101215202530
77080786395610491142
8262 B8262 C8262 D8262 E8262 F8262 G
1
101215202530
9059481013112212311340
8259 B8259 C8259 D8259 E8259 F8259 G
1½
101215202530
122312691338145415691684
8263 B8263 C8263 D8263 E8263 F8263 G
2
101215202530
136514111480159617111826
8264 B8264 C8264 D8264 E8264 F8264 G
3
101215202530
189719722083226924552641
8265 B8265 C8265 D8265 E8265 F8265 G
4
101215202530
226823432454264028263012
8266 B8266 C8266 D8266 E8266 F8266 G
5
101215202530
269327952949320634633719
8267 B8267 C8267 D8267 E8267 F8267 G
6
101215202530
271228142968322534823738
40
Series USA andHand Chain Hoists
Series USA Lug Mounted Models (Hoist Only) - Metric Rated Except for Spark Resistant Models
Standard lift is 8'-0".Standard hand chain drop is approximately 1½ ft. above the fully extended load hook.
Notice: MILITARY SPECIFICATIONS BUDGIT Aluminum Chain Blocks and Track Clamps are on the Qualified Products List QPL-904 for military specifications. Contact factory for prices and delivery. Furnish complete ordering data requirements.
Note: If trolley drop stops are needed, please use pricing for heavy duty trolleys listed on page 18.
Series USA Army-Type Trolley Hoists - Metric Rated Except for Spark Resistant ModelsCapacities ¼ to 6 TonsStandard lift is 8'Standard hand chain drop is approximately 1½ ft. above the fully extended load hook.
Load Chain OptionSpecify for plated load chain in Hand Chain Hoists.
Hand chain for ¼ and ½ ton spark resistant model units is everdur bronze, while the standard hand chain for spark resistant 1-6 ton models is aluminum.Standard hand chain drop is approximately 1½ feet above the fully extended load hook. Trolley spark resistant hand chain is aluminum.
BUDGIT®
CatalogNumber
Capacity(tons)
Lug MountedHoist Price
Extra for Each Add'l Foot of Lift
Load &Hand Chain
Load ChainOnly
Hand Chain Only Per Foot
of Drop
Lug Mounted Models (Must add Rigid Mount Trolley)
830183028303830083048305830683078308
1/41/21
1-1/223456
9019011018120612851841201626762705
18.6018.6021.7523.0523.0537.1937.1951.3451.34
10.2910.2912.8514.1514.1528.2928.2942.4442.44
8.318.318.908.908.908.908.908.908.90
Spark & Corrosion Resistant Models (Must add Rigid Mount Trolley)
8301SR8302SR8303SR8300SR8304SR8305SR8306SR8307SR8308SR
1/41/21
1-1/223456
169716971936257126534284441757315771
79.4579.4568.1891.9091.90164.54164.54237.17237.17
48.9148.9148.9172.6372.63145.27145.27217.90217.90
30.5430.5419.2719.2719.2719.2719.2719.2719.27
Push Type – Standard Models
CatalogNumber
Capacity(tons)
NetWt.(lbs) Price
Extra for Each Additional Foot of Lift
Load & Hand Chain
Load ChainOnly
Hand Chain Only Per Foot
of Drop
831083118312831383148315831683178318
¼½1
1½23456
4242
60-1/298-1/298-1/2
150250-1/2
280281
111511151329163217132432287738623892
18.6018.6021.7523.0523.0537.1937.1951.3451.34
10.2910.2912.8514.1514.1528.2928.2942.4442.44
8.318.318.908.908.908.908.908.908.90
Push Type – Spark and Corrosion Resistant Models
CatalogNumber
Capacity(tons)
NetWt.(lbs) Price
Extra for Each Additional Foot of Lift
Load & Hand Chain
Load ChainOnly
Hand Chain Only Per Foot
of Drop
8310SR8311SR8312SR8313SR8314SR8315SR8316SR8317SR8318SR
¼½1
1½23456
4242
60-1/298-1/298-1/2
150250-1/2
280281
349334933982484049256251638884888529
79.4579.4568.1891.9091.90164.54164.54237.17237.17
48.9148.9148.9172.6372.63145.27145.27217.90217.90
30.5430.5419.2719.2719.2719.2719.2719.2719.27
41
Series USA Army TypeTrolley Hoists
Series USA Army-Type Trolley Hoists - Metric Rated Except for Spark Resistant ModelsCapacities ¼ to 6 Tons
Note: When ordering give catalog Number, capacity and length of lift for hoist that is to be used on. Apply to factory for longer lifts.* Trolley mounted hoists only.
Chain ContainersFor USA Hoists - Standard For USA Hoists - Spark Resistant
Series USA Army Type Trolley Hoists Only
Standard lift is 8'-0" standard hand chain drop is approximate 1½ ft. above fully extended load hook.
BUDGIT®
Note: If trolley drop stops are needed, please use pricing for heavy duty trolleys listed on page 18.
Trolleys included as standard for 1-3 ton capacities do not have drop stops as an option. To price for drop stops, use lug mounted hoist price and add price of heavy duty rigid mount trolleys listed on page 18 and include drop stop adder.
Hand-Geared Type – Standard Models
CatalogNumber
Capacity(tons)
NetWt.(lbs) Price
Extra for Each Additional Foot of Lift
Load & Hand Chain
Load ChainOnly
Hand Chain Only Per Foot of Drop
83218322832383248325832683278328
½1
1½23456
6776-1/2
112-1/2112-1/2
165265-1/2
295296
16581778210121822989342446334663
26.9130.6531.9531.9546.0946.0960.2460.24
10.2912.8514.1514.1528.2928.2942.4442.44
16.6217.8017.8017.8017.8017.8017.8017.80
Hand-Geared Type – Spark & Corrosion Resistant Models
CatalogNumber
Capacity(tons)
NetWt.(lbs) Price
Extra for Each Additional Foot of Lift
Load & Hand Chain
Load ChainOnly
Hand Chain Only Per Foot of Drop
8321SR8322SR8323SR8324SR8325SR8326SR8327SR8328SR
½1
1½23456
6776-1/2
112-1/2112-1/2
165265-1/2
295296
46945218461847036839697593189359
110.0087.45111.17111.17183.81183.81256.44256.44
48.9148.9172.6372.63145.27145.27217.90217.90
61.0938.5438.5438.5438.5438.5438.5438.54
CatalogNumber
Net.Wt.(lbs)
Max. Lift in ft. Container Will Accommodate
PriceCatalogNumber
Net.Wt.(lbs)
Max. Lift in ft. Container Will Accommodate
Price¼ & ½
Ton1
Ton1½ & 2
Ton3 & 4Ton
5 & 6Ton
¼ & ½Ton
1Ton
1½ & 2Ton
3 & 4Ton
5 & 6Ton
902741902742902743902744902745902750902751902752902753902754
58
1015209
14203640
1525405575–––––
1020304565–––––
–––––
1530406690
–––––815203345
––––––
10132330
104144176345523137146380400650
902759902760902761902765902766902767902768902762
444326-21
581091420222222
152540––––
55–
102030––––
45–
–––
15304065–
90
–––8152032–
45
––––
101321–
30
422427504427504605648597712
Beam Flange Adjustment
Capacity(tons)
Standard FlangeAdjustment
(in)
Extended Adjustment - With Add to Standard Patented Track Add to Stan-dard
1st ExtensionFlange Adjustment
(in) Price
2nd ExtensionFlange Adjustment
(in) PriceFlange Adjustment
(in) Price
1/4 — 1/21
1-1/2 — 234
5 — 6
2-5/8 — 4-5/83 — 5
3-3/8 — 63-3/8 — 64 — 6-1/44 — 6-1/4
5-1/4 — 7-3/85-1/4 — 7-3/86-1/4 — 8-7/86-1/8 — 8-7/86-3/8 — 8-5/86-3/8 — 8-5/8
133
——
9 — 119 — 11
8-3/4 — 118-3/4 — 11
——
197197197197
3-1/4 — 4-1/16
298312375375375375
42
Chain Hoist & TrolleyAccessories
Load Chain OptionSpecify for plated load chain in Hand Chain Hoists
Hand Chain OptionsThe hand chain on all BUDGIT products of standard design is zinc-plated hand chain. Plated hand chain provides a corrosion-resistant finish for outdoor and other corrosive applications and reduces friction against the walls of the chain guide. Less effort is required to raise and lower loads.The hand chain on the BUDGIT Series USA Spark Resistant "SR" ¼ and ½ ton models is Everdur Bronze while all other BUDGIT Spark Resistant "SR" hoists and geared trolleys have aluminum hand chain.Bronze hand chain is a spark and corrosion-resistant material providing greater protection for the more corrosive and hazardous atmospheres.It can be added to standard BUDGIT hand chain hoists and trolleys. Add to the hoist as follows:
When ordering longer than standard chain drop, include both price for standard drop and price for each additional foot of drop.For bronze or spark resistant hand chain on Steel Frame hoists and Low Headroom hoists as well as Cast Iron Wheel Model P geared trolleys, apply to factory.
Notice: MILITARY SPECIFICATIONS - BUDGIT Aluminum Chain Blocks and Track Clamps are on the Qualified Products List QPL-904 for military specifications. Contact factory for prices and delivery. FURNISH COMPLETE ORDERING DATA REQUIREMENTS.
Track ClampsNote: When ordering, give complete I-beam dimensions and include Trolley Hoist Catalog Number, capacity and length of lift.
*Above price for clamp with connecting bar for use with BUDGIT Aluminum Army Type Trolley Hoists. Apply to factory for other applications.For longer than standard 5' - 0" hand chain drop, add $8.34 per ft.
Hand Operated Hoists Bullard Hook Price Additions
Carrying Case for USA Hoists
Eye Bolt Suspension
Budgit USA
Only
BUDGIT®
DescriptionPriceAdd
Special Finish — Plating, Coating or Paint 655
Stainless Steel I.D. Tags 129
Rigid Mount To Hook Suspension Adapter, for Attachment of Hook Suspension Hoist to Rigid Mount Trolley
1 Ton, Catalog No. 900791, 4-1/3" Headroom*2 Ton, Catalog No. 900792, 4-3/4" Headroom*3 Ton, Catalog No. 900793, 5-3/8" Headroom*
266320347
Mag Partical Test - per hook 230
*Headroom measurement is from Beam to Saddle
DescriptionPriceAdd
BUDGIT Aluminum Hand Chain Hoist - 1/4 thru 2 Ton..BUDGIT Steel Frame Chain Hoist — 1/4 thru 2 Ton......
11592
Catalog No. Price
98................................................................... 106
Capacity(tons)
Bronze HandChain Adder
Price Per FtOf Drop
¼ & ½1 – 1½ & 21 Thru 12
add to plated steeladd to aluminum
add to plated steel
23.8223.8236.72
Bullard Hook For:
Price Add
Upper Lower
BUDGIT Hand Chain Hoist
1/4 and 1/2 Ton.......................................1 Ton.......................................................2 Ton.......................................................3 Ton.......................................................4 Ton.......................................................5 Ton.......................................................6 Ton.......................................................
184184200200524628712
127127172200524628712
BUDGIT Steel Frame Chain Hoist Apply to Factory
Catalog Number Description Price
51547201 For Aluminum Frame Chain Hoists*.............. 2461
Note: Spark resistant bullard hooks not available.
43
Steel Frame Hand Chain Hoists
Load Lifter Hand Chain Hoists SERIES 622 (Bulletin #LT/BC-H3004-0802)*
*Prices are FOB Wadesboro, North Carolina
BUDGIT®
Model AM Army Type Trolley Hoists Unit price each with lift shown*
Wide flange beam operation withinthe standard beam range .................... No Charge - the exact beam must be provided.
Wide flange operation beyond themaximum flange widths ............................................................ P.O.A.
Patented track operation within the standardbeam flange (straight track only) .........................Add:
Plain Geared 1/2 and 1 Ton $104.00 $137.30 2 Ton 149.80 197.60 3 Ton 186.20 236.10 5 Ton 260.00 267.30
Model AM Army Type Options
AM Army Types are designed for straight-track operation.
Chain Containers ....................................................................... P.O.A. (not available on all models)
Zinc plated load chain .............................................Add:
1/2 and 1 Ton............................................................ 1.40/foot of lift 2 Ton ......................................................................... 2.30/foot of lift 3 Ton ......................................................................... 3.30/foot of lift 5 Ton ......................................................................... 4.40/foot of lift
Zinc plated hand chain ............................................Add:
Plain Trolley ......................................................... 1.00/foot of drop Geared Trolley .......................................................1.70/foot of drop
Overload Limiter .......................................................................120.70
Drop Stops ....................................................................................200
Note: Maximum available lift is 30 feet. * Prices are FOB Lisbon, Ohio
PLAIN TROLLEY MODEL
CatalogNumber
Capacity(tons)
Standard Flange Width Range (in)
Unit Price Each
10' 15' 20' 25' 30'
913614 1/4 2-5/8 - 4-5/8 716.60 766.30 816.00 865.70 915.50
913615 1/2 2-5/8 - 4-5/8 716.60 766.30 816.00 865.70 915.50
913616 1 2-5/8 - 4-5/8 769.00 818.70 868.40 918.20 967.90
913617 2 3 - 5-1/2 1047.40 1110.40 1173.30 1236.20 1299.10
913618 3 3-3/8 - 6 1420.70 1489.30 1558.00 1626.60 1695.20
913619 5 4 - 6-1/4 2532.40 2622.90 2713.40 2803.90 2894.40
GEARED TROLLEY MODEL
913622 1/4 2-5/8 - 4-5/8 942.20 1030.90 1119.50 1208.20 1296.90
913623 1/2 2-5/8 - 4-5/8 942.20 1030.90 1119.50 1208.20 1296.90
913624 1 2-5/8 - 4-5/8 999.40 1088.10 1176.80 1264.90 1354.20
913625 2 3 - 5-1/2 1304.00 1372.10 1440.30 1508.00 1576.70
913626 3 3-3/8 - 6 1722.10 1788.80 1855.40 1922.10 1989.50
913627 5 4 - 6-1/4 2891.70 2991.70 3091.70 3191.60 3291.60
CatalogNumber
Capacity(tons)
Lift(ft)
Weight(lbs) Price
Extra Lift Per Foot #
Hand Chain Only
Hand and Load Chain
Load ChainOnly
9221101/2
8 15 96.40 10.80 5.41
5.40
922111 12 19 139.60 10.80 5.41
9221121
8 22 108.30 12.35 6.95
922113 12 26 157.70 12.35 6.95
9221142
8 53 231.90 19.55 14.14
922115 12 61 310.10 19.55 14.14
922116 3 8 69 263.60 33.70 28.28
922117 5 8 74 682.60 33.70 28.28
922118 10 8 139 1777.10 61.95 56.56
44
TUGIT® Lever Operated Hoists
Series 602 Lever Hoist
Nylon Carrying Bag Catalog Number 0217 .................... $18
Prices are FOB Wadesboro, North Carolina
Series 603 Lever Hoist
Nylon Carrying Bag Catalog Number 0212 .................... $17
Prices are FOB Wadesboro, North Carolina
Lever Operated Hoist Series 653 Shipyard Hooks for Series 653
MaximumCapacity
(tons)Upper Hook
PriceLower Hook
Price
1½ 75 75
3 99 99
CatalogNum-ber
Capacity(lbs)
MaxLift(ft)
Net Wt.(lbs) Price
0210 550 5 6 136
0214 550 10 7 173
CatalogNum-ber
Capacity(lbs)
MaxLift(ft)
Net Wt.(lbs) Price
0215 1100 5 7 181
0216 1100 10 8 226
CatalogNumber
Max.Cap
(tons)
Std.Lift(ft)
Ship Wt.(lbs) Price
ExtraLift
Per ft.
5310
3/4
5 19 231.00
6.95
5311 10 21 265.75
5312 15 26 300.50
5313 20 28 335.25
5328 1 5 19 260.00
5315
1-1/2
5 31 300.00
8.45
5316 10 36 342.25
5317 15 41 384.50
5318 20 45 426.75
5329 2 5 31 419.00
53203
5 51 482.0014.14
5321 10 59 552.70
5330 6 5 78 884.0028.28
5331 6 10 94 969.00
45
"Z" Hoist Program
GeneralFor the Prompt delivery of hoists with custom length lifts from distributor inventory, the "Z" hoist program offers the following:
1. The availability of BUDGIT Hand Chain Hoists without load chain.
2. The availability of load and hand chain in bulk lengths.
3. Eliminating the return of standard length load chain to the factory, saving the distributor the freight and handling expense.
ObjectiveThe objective of the program is to increase the flexibility of our distributor stocks and create added sales by providing off-the-shelf delivery by developing the capability of our distributors to provide long lift hoists. The "Z" hoist program is designed to supplement a responsible distributor's inventory by shipping the popular model BUDGIT electric chain hoists. The hand chain hoists have standard hand chains installed and the electric chain hoists will have the standard pendant drops installed. The BUDGIT hoists will be identified with the suffix "Z" when it is to be shipped less load chain.
How the "Z" Hoist helps the distributor1. The distributor can order one or more "Z" hoists in the popular capacity models, as listed on pages 57 through 58 and have an unchained hoist in stock ready for immediate installation of long length chains.
How the "Z" Hoist Program Works1. How to Order: All orders for prepackaged chain should be sent the normal way through the Customer Service Department. Order by catalog number as shown on pages 57-58.
A. Electric and Hand Chain Hoists: Use the regular catalog numbers, except add the final suffix "Z". The suffix "Z" will always indicate that the hoist has no load chain but will have the standard pendant drop or standard length hand chain drop installed.
2. What Hoists Should Distributors Stock:A. Standard BUDGIT Electric Chain Hoists in capacities 1/2 through 3 ton.
B. Standard BUDGIT Hand Chain Hoists in capacities 1/2 through 6 ton, hook suspension models only.
It is not the purpose of the program to have the distributor stock only one or two standard length hoists or only "Z" hoists. As in the past, based on historical sales records of hoists, various lengths should continue to be stocked, since the lowest cost to the distributor is to ship from the shelf without opening the box.
Different ways that long lift hoist can be obtained1. Hoists may continue to be ordered with long lifts from the factory.
2. Run bulk chain into stock or "Z" hoists to obtain desired chain lengths.
3. Distributors requiring long lifts, in short lead time situation and who do not have bulk packaged chain, may order chain in less than the package lengths from their local service station at the suggested discount of 10% for load chain and 15% for hand chain lengths.
Chain Reeving of "Z" Model HoistsRefer to reeving instruction manuals for proper information for preparing and cutting load chain and instructions for reeving load chain into various models and capacities of your "Z" Model hoists. The instructions for modifying load chain length on chain blocks are also provided. For reeving instructions, consult the following:
Instruction No. 113534-72 Reeving Instructions BUDGIT Hand Chain Hoists.
O & M Manual 113535-12 BUDGIT Manguard Electric Hoist
Testing the "Z" Model HoistThe various component parts of "Z" model hoists have all been pretested. The hoist was tested complete at factory before chain and lower block removal for shipment. All factory supplied chain has been proof tested. Therefore, proper assembly only need be checked and proper hoist operation observed after reeving by using a test load of 50 pounds or more per part of chain.
Direct any questions concerning this program to your local field representative, who is always available for help.
Hoists without Load ChainBudgit Electric Chain HoistsBudgit Hand Chain Hoists
BUDGIT®
46
Hoist Catalog NumberAnd Capacity Description
IdentifyingSymbols
Identifying Symbols
Effective 7/1/96
1/4 and 1/2 Ton BUDGIT Electric and all BUDGIT 2000 Series Air Hoists
Alloy Link Chain Natural Color 1/4" Bar Diameter or
1, 2 , 3 and 5 Ton BUDGIT Electric Hoists and Series 6000 Air Hoists
Alloy Link Chain Natural Color 5/16" Bar Diameter or
1/4 and 1/2 Ton BUDGIT Electric Hoists and 1/4, 1/2 and 1 Ton BUDGIT Air Hoists
5/8 Pitch, RC625 Riveted Hoist Roller Chain Including Four (4) Riveted Connecting Links
RC-625or
625
RC-625or
625
1 and 2 Ton BUDGIT Electric Hoists3/4 Pitch, H6 Riveted Hoist Roller Chain Including Four (4) Riveted Connecting Links
H-750or
H-6
H-750or
H-6
Budgit Hand Chain Hoists
Catalog 8260 (1/4 Ton), & 8261 (1/2 Ton) Alloy Link Chain Natural Color — 1/4" Bar Diameter
Catalog 8262 (1 Ton)Alloy Link Chain Natural Color — 9/32" Bar Diameter
or
Catalog 8259 (1-1/2 Ton), & 8263 (2 Ton) (Also fits 1-1/2 — 10 Ton Models)
Alloy Link Chain Natural Color — 3/8" Bar Diameter or
Tugit Lever Operated HoistsNOTE: Identification markings appear
on links (every 12-18 inches)as per example at right
Catalog 234 (3/4 Ton) Alloy Link Chain Natural Color — 1/4" Bar Diameter
Catalog 230 (1 Ton), 245 (1-1/2 Ton, & 240 (2 Ton)
Alloy Link Chain Natural Color — 9/32" Bar Diameter
or
Catalog 291 (1-1/2 Ton, 292 (3 Ton), 293 (1-1/2 — 3 Ton), (4-1/2 Ton) & 295 (6 Ton)
Alloy Link Chain Natural Color — 5/16" Bar Diameter
or
or
w
w
w
H
BUDGIT® "Z" Hoist Program Load Chain
Identification Markings
Electric Hoists and Air Hoists
H
H
LTI
LTI
LTI
LTI
LTI
LTI
LTI
LTI
LTI
47
Catalog Number
Capacity (tons)
Price"Z" Model
ChainSize Di-ameter
(in)
Standard Lifts Special Lifts
Lift(ft)
ExactChain Length
TotalChain Price
Multiply
Length of ChainChain PricePer Lineal ft
USA
8260Z 1/4 654.741/4
8
9' - 0"
101.48
Lift + 1'
10.73
8261Z 1/2 654.74 101.48 10.73
8262Z 1 767.51 9/32 126.83 13.44
8259Z 1-1/2 1066.52
3/8
9' - 1-1/2"141.48
Lift + 1' - 1-1/2" *14.77
8263Z 2 1210.55 141.48 14.77
8264Z 3 1597.6317' - 9"
275.18Lift x 2 Plus 1' - 9" *
14.77
8265Z 4 1977.01 275.18 14.77
8266Z 5 2257.6626' - 4"
407.73Lift x 3 Plus 2' - 4" *
14.77
8267Z 6 2273.47 407.73 14.77
"Z" Program Hand Chain Hoists1/4 - 6 Ton Capacities
Note: All "Z" model BUDGIT Hand Chain Hoists, although shipped less load chain, are equipped with standard length hand chain for 8'-0" lift. Add two lineal feet of hand chain for each foot of drop over the standard for 8'-0" lift. Hand chain price is $8.80 per ft. of drop on 1/4 and 1/2 Ton and $9.43 per ft. of drop on 1 through 10 ton.
EXAMPLE: Wanted a 3-Ton Catalog 8264Z Chain Block with 20' lift.1. Load Chain = [(20' lift x 2) + 1'-9"] x $14.77 41'-9" x $14.77 = $616.65 * 1'-1/2" = 1.125 ft.2. Hand Chain = (20'-0" - 8'-0") x $9.17 = 12' x $9.17 = 110.04 1'-9" = 1.75 ft.3. 8264Z Hoist = 1597.63 2'-4" = 2.33 ft. 2'-10" = 2.83 ft.Catalog 8264Z Chain Hoist 20'-0" Lift $2324.32 3'-9" = 3.75 ft.
Model "Z" Hand Chain Hoist Catalog Numbers, Chain Data and Pricing
BUDGIT®
Contact your district sales manager for new Model "Z" Electric Chain Hoist Program
"Z" Program Electric Chain Hoists1/4 - 3 Ton Capacities
48
Catalog NumberBudgit
Part Number Zinc Plated910102 203992-4
—910112 204013-1
910121 & 910122 209159-1 209159-3
910131 & 910132 200626-1 200626-3
910151 & 910152 200656-1 200656-3
910141 & 910142 209156-1 209156-3
910125 & 910126 208778-1 208778-3
910172 No 896
910183 No 901
Hand Chain Hoists - Hand Chain
CatalogNumber
Capacity(tons) Description
Feet of ChainIn Package
Wt(lbs)
CatalogNumber Price
8260 & 8261260 & 261
¼ - ½ Hand Chain 1/0-3/0 Plated200' with 10 Everdur
Connecting Links85 910102 855.82
8262-8263264-269
1 - 10 Hand Chain 15/64 Plated200' with 10 Everdur
Connecting Links100 910112 917.02
360 - 3694301 - 4323913630 - 913645
¼ - 10Hand Chain 15/64 Natural Color 250' 116 85927 1473.12
Hand Chain 15/64 Natural Color 500' 228 85006 2946.24
Hand Chain Hoists - Load Chain
USA Spark Resistant 1 - 6 Hand Chain Stainless Steel 200' 88 C93755 4301.49
8260 & 8261 ¼ - ½Alloy Link Chain Natural Color1/4" Bar Diameter
150' 90 910121 1589.18
300' 180 910122 3178.35
8262 1Alloy Link Chain Natural Color9/32" Bar Diameter
150' 120 910131 1986.47
300' 240 910132 3972.96
8259 & 8263Hoist fits models
1½ - 10
Alloy Link Chain Natural Color3/8" Bar Diameter Alloy Link Chain Natural Color1/4" Bar Diameter
150' 200 910151 2186.00
300' 395 910152 4372.00
360 - 3614301 - 4302/4311 - 4312913630375, 334 Lever Hoist
¼ - ½¼ - ½¼ - ½
¾
Alloy Link Chain Natural Color1/4" Bar Diameter
250' 152 85928 3113.98
500' 304 85007 6227.96
362, 4303, 4315913631
1Alloy Link Chain Natural Color9/32" Bar Diameter
200' 183 85930 3004.72
500' 458 85008 7511.80
359 - 3694300 - 4323913632 - 913645
1½ - 101 - 121½ - 6
Alloy Link Chain Natural Color3/8" Bar Diameter
200' 274 85932 3408.98
500' 688 85010 8522.47
Tugit Lever Operated Hoists
234 ¾Alloy Link Chain Natural Color1/4" Bar Diameter
150' 90 910121 1589.18
300' 180 910122 3178.35
230, 245 & 240 1, 1½ & 2Alloy Link Chain Natural Color9/32" Bar Diameter
150' 120 910131 1986.47
300' 240 910132 3972.96
291, 292, 293, 294 & 295 1½, 3, 4½, & 6Alloy Link Chain Natural Color5/16" Bar Diameter
150' 145 910141 2729.38
300' 285 910142 5458.75
All TUGITSEnd Rings to install in chains cut and installed from bulk chain
Box 24 10 910161 47.68
Tugit2 Lever Operated Hoists
345, 342, 391, 392 & 395 1½ - 6Alloy Link Chain Natural Color5/16" Bar Diameter
200' 190 85931 3430.84
500' 439 85009 8577.10
BUDGIT® "Z" Program Packaged Chain
Load & Hand Chain
Bulk Chain Part Number Cross Reference
All Tugit2 and Hi-Cap2 Bulk Chain are FOB Lexington, TN
49
CatalogNumber
Capacity(tons) Description
Wire Dia.(in)
Length Per Drum(ft)
Weight(lbs) Price
922138 1/4 - 1/2
Load Chain
.197
250
90 1888.36
922135 1 .236 143 2189.16
922136 1-1/2 - 10 .394 305 3592.21
GHH5009J 1/4 - 10 Hand Chain .192 83 919.10
Tugit Lever Chain Hoists Series 653*85002 3/4 - 1
Load Chain
.236 250 143 2226.22
85029 1-1/2 - 2 .312 200 176 2917.30
85003 3 - 6 .394 200 305 2917.30
CatalogNumber Description
WeightLbs Price
1200 Hydraulic - Hand Operated 496 9792
Hoist Catalog NumberAnd Capacity Description
Feet of ChainIn Package
Wt.(lbs)
CatalogNumber Price
1/4 and 1/2 TonBUDGIT Electric and BUDGIT Series 2000 Air hoists
Alloy Link Chain Natural Color 150' 95 910125 2150.28
1/4" Bar Diameter 300' 185 910126 4299.47
1, 2 & 3 Ton BUDGIT Electric & Series 6000 Air Hoist
Alloy Link Natural Color 150' 145 910141 2729.38
5/16" Bar Diameter 300' 285 910142 5458.75
1/4 and 1/2 TonBUDGIT Electric 1/4, 1/2 and1 Ton BUDGIT Air Series 2000
5/8 Pitch, RC625 Riveted Hoist Roller Chain including four (4) Riveted Connecting LinksRC625 Riveted LinkRC625 Spring End Link
50' 40 910172 1391.46
Box of 242 910201 118.00
2 910205 118.00
1 and 2 Ton BUDGITElectric Hoist
3/4 Pitch, H6 Riveted Hoist Roller Chain In-cluding four (4) Riveted Connecting Links H6 Riveted Link H6 Spring End Link
50' 60 910183 1556.99
Box of 242 910202 118.00
2 910206 118.00
1, 2, 3 & 5 ton BUDGIT Electric Chain Hoists Pendant cable for single speed electric hoists 500' 86 931210 1460.64
BUDGIT®
* Prices are FOB Wadesboro, North Carolina
† Prices are FOB Lisbon, Ohio
Value Priced Test Stand †
"Z" Program Packaged ChainLoad & Hand Chain
Electric or Air Hoist - Load Chain
Bulk Chain*Load Lifter Hand Chain Hoists Series 622
Plated Link Load Chain available in bulk - Consult Factory
50
Clearance Diagrams
Standard Clearance Diagrams ............................................................................................................................................No Charge
Standard clearance diagrams apply to cataloged models in the Budgit price book not including optional features or accessories.
Clearance Diagrams for Engineered Products ................................................................................................................... 56.00 Net
Clearance diagrams which require additional labeling including specific lifts, optional or special features, customer name, order number, etc. that are not included in the standard drawings. The diagrams will be a unique drawing for each hoist, trolley and chain container combination. Drawings will show general configuration of overall dimensions. They will be done in CAD and provided on an 8½ x 11" bond paper, which is suitable for reproduction on any standard copy machine, so there is no need for reproducibles, such as sepias or mylars.
Wiring Diagrams ..................................................................................................................................................................No Charge
Wiring diagrams will be our standard printed format, as provided in our instruction manuals.
Instruction and Parts ManualsCMCO will provide up to three manuals, if requested for each product type on an order at no charge. Additional manuals will be provided for the following charges:
Powered Products ................................................................................................................................................................ 10.03 Net
BUDGIT Electric Hoists BUDGIT Air Chain Hoists BUDGIT Motor Driven Trolleys BUDGIT Air Motor Driven Trolleys
Bridge Crane Components ................................................................................................................................................. 10.03 Net
Top Running & Underhung, Single Girder Bridge Crane Kits, Push, Hand Geared or, Motor Driven
Manual Products ................................................................................................................................................................. 10.03 Net
*BUDGIT Hand Chain Hoists BUDGIT Push & Hand Geared Trolleys TUGIT Lever Operated Chain Hoists All Chain Containers * USA Army Type Hoists require 2 manuals (hoist and trolley)
Load Test Certification (must ask for at time of order) ........................................................................................................No Charge
CMCO will perform and certify its standard load tests for hoists. Testing will be in accordance with ANSI B30.16.
Hook Gage Marks ................................................................................................................................................................ 105.55 Net
Damascus Manuals ............................................................................................................................................................. 10.03 Net
Clearance Diagrams and Parts & Service Manuals are available online at www.cmworks.com
BUDGIT®
51
BUDGIT®
Checklist for Manual Chain HoistHoist Model NumberLift Requirements – 8' Standard *Hand Chain Drop – 6' - 6" StandardSuspension – Hook Lug – Plain Trolley Handgeared Trolley – Standard Hand Chain Drop is 6' - 6"
Spark & Corrosion ResistantPlated Load ChainChain BucketOverload Device (Standard on USA Models)
* On higher capacity long lift hoists take note on the hand chain overhaul in feet to lift load one foot.
Checklist for Lever HoistHoist Model NumberLift Requirements – 4' - 6" StandardPlated Load ChainOverload Device – Redline Model "R" is in front of the Catalog Number
Checklist for Manual TrolleysTrolley Model NumberSuspension – Hook Type Lug – Plain Trolley Handgeared Trolley – Standard Hand Chain Drop is 9' - 6"
Spark Resistant Features (if required)Beam size Trolley is to run on Straight Monorail or Curve (Radius Requirements Needed)
Checklist for Electric Chain HoistHoist Model NumberLift Requirements – Maximum Recommended Lift (7 x Lift Speed)Electric Hoists with lifts over 90', a lug mounted trolley is recommendedLift Speed – Single or Two SpeedSuspension – Hook Lug – For Plain or Handgeared Trolley Lug – For Motor Driven TrolleyVoltage – Need to Specify for Two SpeedIndoor Service – StandardOutdoor Service – Weatherproofing Adder (includes plated chain) or CoverPendant Drop – If other than Standard Lift on Hook Mount, Lug Suspension for Plain & Handgeared Trolleys. Hoists with Motorized Trolleys, the Pendant Cable is Added to the Trolley, instead of the Hoist. See Trolley Options.Type of Trolley – Check Beam Size and Radius Requirements (if any) Plain Handgeared – Standard Hand Chain Drop is 9' - 6" Motorized – Standard Pushbutton Drop is 7' Indoor – Standard Outdoor – NEMA 3R, NEMA 4Recommended Adders – Mainline Disconnect panel for Monorail Hoist.Two speed Hoist require a different trolley from a Single Speed Hoist. When ordering for a Bridge Crane you will need fusing, and Extra Pushbuttons to operate the Crane if the Pushbutton is from the Hoist.
Pushbutton deduct is for the hoist with Motorized Trolley only.Chain BucketElectrification for Monorail Hoist Cord Reel Retractile Cord Festooned Conductor System C-track Supported Festooned Conductor System Wire rope Supported Conductor Kits figure 8 Bar Spring type Slide Collectors Required, Collector Pole & Bracket Required on Trolley.
Hoist & ComponentChecklists
52
BUDGIT®
Checklist for Air Chain HoistsHoist Model NumberLift Requirements – 10' Standard – Maximum lift of 6000 Series Air Hoist is (7 x Lift Speed)Air chain Hoists with lifts over 90', a lug mounted hoist is recommended.Lift SpeedSuspension – Check Beam Size and Radius Requirements (if any) Hook Lug – Handgeared – 9' - 6" Standard Hand Chain Drop Push Type Air Motor Driven TrolleyPull Cord Drop – Included in Additional Lift PricePendant Drop – 6' Standard 2200 Series – Maximum Pendant Drop 72' 6000 Series – Maximum Pendant Drop 36'Spark Resistant FeaturesPlated Load Chain OptionAir Motor Driven Trolley – Check Beam Size and Radius Requirements (if any) Standard Pendant Drop is 6' Maximum Pendant Drop is 36' Spark Resistant FeaturesChain BucketAir Supply Hose Air Hose Trolleys Wire Rope Festoon SystemFilter – RecommendedLubricator – RecommendedRegulator – Recommended if air Supply is over 90 PSIRecoil Air Hose Nylon coated Cable Recommended
Checklist for Electric Bridge CranesEnd Trucks – Check runway beam size for underhung bridgesGear ReducerMotorControls – Indoor – Standard Outdoor – NEMA 3R NEMA 4/12 NEMA 4X and 7 available upon requestFused Disconnect Switch – Indoor – Standard Outdoor – NEMA 3R, NEMA 4/12, NEMA 4X and 7 available upon requestCross Shaft SupportCross Shaft CouplingBumpersBridge ElectrificationRunway ElectrificationCollector Pole & BracketMain CollectorsSome Recommended Optional Equipment Electronic Acceleration Control Bridge Brake
Items needed to be added to Electric Hoist for Electric Bridge Crane
FusesExtra Pushbuttons to Operate Bridge Crane (4 additional buttons needed)Tow Arm – Use Catalog Number 931103115 Control voltage on Hoist
Hoist & ComponentChecklists
53
BUDGIT®
HoistCapacity
Lift
Lift Speed
Voltage or Air Supply
Headroom Requirements
Type of Suspension
Lug Hook
Spark Resistance (Air/Manual only)
OptionsWeatherproofing
Plated Load Chain
Chain Bucket
Monorail Electrification
Air Host
Filter & Lubricator
Special Paint
TrolleyType of Trolley
Plain
Handgeared
Motorized
Voltage or Air Supply
Pendant Drop
Trolley Speed
Spark Resistance (Air/Manual only)
Beam Size to Run on Beam Radius
Options2 Speed
Trolley Brake
Weatherproofing
Ballast Resistors
Electronic Acceleration Control
Extra Pushbuttons
Extra Hand Chain Drop
Wide Flange Adjustment
Collector Pole & Bracket
Collectors
Trolley Locking Clamp
Special Paint
Fuses
Mainline Disconnect Panel
Hoist and CraneSpecification sheets
54
BUDGIT® Hoist and Crane
Specification sheets
Bridge CraneCapacity (5 ton Max.)
Span (36' - 0" Max.)
Top-Running Runway Rail to Run on
Underhung Beam to Run on
Bridge Movement
Push Pull
Handgeared
Hand Chain Drop
Motorized
Bridge Speed
Voltage
Control Enclosure (NEMA 1 Standard)
Disconnect Enclosure (NEMA 1 Standard)
Bridge Electrification
Runway Electrification
Runway Length
Pushbutton From Hoist (Extra Pushbuttons Required)
Hoist for BridgeCapacity
Lift
Headroom Requirements
Lift Speed
Voltage
Trolley Type
Plain
Handgeared
Motorized
Trolley Speed
See Hoist Specification Sheet for Hoist & Trolley Options.
Bridge Components OptionsElectronic Acceleration Control
2 Speed Motors & Controls
Ballast Resistors
Bridge Brake
Motor Protection
Weatherproofing
Main Collector
Wide Flange Adjustment
Notes
top related