ccbs pricebook

TOLL FREE (888) 237-7455 ● FAX (831) 674-3949 ● [email protected] - 1 -

PRICE LIST EFFECTIVE: JUNE 2009

ORDERING GUIDELINES

TERMS:

1% 10 DAYS NET 30 FOR ESTABLISHED ACCOUNTS. VISA, MASTERCARD AND AMERICAN EXPRESS ARE ACCEPTED. CREDIT CARD PAYMENT TERMS ARE NET.

FREIGHT: PREPAID

CCBS ORDERS ARE F.O.B. FROM CCBS. ORDER THAT NET $1,000.00 WILL BE SHIPPED FREIGHT PREPAID IN THE CONTIGUOUS 48 STATES WITH THE CARRIER OF OUR CHOICE (16’ MILL LENGTHS WILL BE CUT AT 9’ AND 7’ FOR SHIPPING PURPOSES). IF CUSTOMER REQUIRES FULL 16’ LENGTHS THERE MUST BE A MINIMUM OF 5 PCS. TOTAL TO SHIP LTL (DAMAGE CONTROL).

CLAIMS FOR SHORTAGES OR DAMAGES

DAMAGES OR SHORTAGES SHALL BE NOTED ON THE FREIGHT BILL AT TIME OF DELIVERY.

RETURNS:

RETURNS MUST HAVE PRIOR RGA ISSUED. 25% RESTOCK CHARGE WILL APPLY TO STOCK ITEMS. SPECIAL ORDERS OR PREPS WILL NOT BE RETURNABLE. CUSTOMER SHALL PAY FOR FREIGHT ON RETURNS.

PACKAGING & FASTENERS

BULK= NOT INDIVIDUALLY WRAPPED PS= 3 MIL POLY SLEEVE BT= BLUE TAPE APPLIED TO SILL FOR PROTECTION FASTENERS PROVIDED W/ ALL PRODUCTS AT NO EXTRA COST.

STANDARD SIZES

ALL PRODUCTS ARE CUT EXACT NET TO SIZE ORDERED. WE DO NOT OVER CUT, A 36” PIECE IS CUT AND SHIPPED AT 36”

FABRICATION

FABRICATION OPTIONS ARE LISTED AT THE BEGINNING OF EACH SECTION.

QUIKSHIP

WE HAVE QUIKSHIP ITEMS DESIGNATED BY AN * ASTERIK AND WILL SHIP SAME DAY WHEN ORDER IS IN BY 2:00 PM.


COMPETITORS PART NUMBER REFERENCE SHEET

CCBS PEMKO COLUMBIA COMBO S-51 160 305 550 S-56 163 307 650 S-67 140 299 675 S-76 161 311 775 S-87 N/A N/A N/A W-51 N/A 205 N/A W-67 N/A N/A N/A SO-31 165 N/A 400 SO-32 149 245 423 SO-46 N/A 309 450 SO-47 N/A N/A N/A SO-55 153 N/A 470 SO-66 N/A 298 N/A SO-64 N/A N/A N/A

AA/OA-35 93518 801 825-827 AA/OA-45 94518 303 830 AA/OA-55 95518 289-322 835

F-56 85714 297 N/A SE-34 EXT3/4 325 N/A SE-20 EXT2 326 836 SE-30 EXT3 318 N/A T-42 270 283 1544 T-45 170 276 1504 T-50 271 280 1545 T-55 171 278 1505 T-60 272 281 1546 T-65 172 279 1506 T-70 276 282 1547 T-75 176 490 1507 T-80 2748 492 N/A T-85 2548 491 N/A T-90 2749 N/A N/A T-95 2549 N/A N/A T-100 2750 N/A 1520 T-104 2550 N/A N/A T-30 218 262 3007 T-40 218 263 3008 T-35 212 N/A N/A


COMPETITORS PART NUMBER REFERENCE SHEET

CCBS PEMKO COLUMBIA COMBO T-36 2050 161 N/A T-39 214 N/A N/A

T-39W 2813 319 340 TI-625 142 N/A N/A TI-825 145 N/A N/A DS-78 307 N/A 209

DS-118 210 260 261 DS-138 215 269 201 DS-134 216 259 251

DST-134 2211 N/A 221 DS-135 N/A 258 151 DS-136 234 N/A N/A DS-185 N/A N/A N/A DS-225 N/A 667 281 DSD-1 N/A N/A N/A

DSRD-1 346 287 N/A ADB-1 412 336 233 ADB-2 411 330 244 SN-26 326 223 3104 SN-45 327 225 3116 SR-1 N/A 339 559 T-105 N/A N/A N/A T-51 N/A N/A 536 DPS N/A N/A N/A STT N/A N/A N/A STB N/A N/A N/A

WS-20 303V 334 1004


COMBO SILL PREPS

PREP-101 “3/4” MILLED ENDS, SILL IS NET 1-1/2” OVER DOOR SIZE”

PREP 101 – 3/4" END MILL FABRICATION. SILL TO BE APPLIED TO BOTTOM OF FRAME. SILL SUPPLIED WITH 3 END HOLES AND 1 CENTER HOLE TO 49-1/2” LENGTH AND 2 CENTER HOLES OVER 49-1/2” LENGTH. PRICE FOR THIS PREP $1.30 LIST

PREP-102 “NO MILLED ENDS, SCREW HOLES ONLY”

PREP 102 – NON-MILLED SILL ENDS. SILL APPLIED BETWEEN FRAME LEGS WHEN STOP HAS BEEN RABBETED. SILL SUPPLIED WITH 2 SCREW HOLES ON ENDS AND 1 CENTER HOLE TO 49-1/2” LENGTH OR 2 CENTER HOLES OVER 49-1/2” LENGTH. THERE IS NO CHARGE FOR THIS PREP.

L- NOTCH OR TRIM NOTCH

L-NOTCH PREP - PREP FOR L OR TRIM NOTCHES. THIS PREP REMOVES A PORTION OF THE FRONT OF A SILL OR THRESHOLD TO ALLOW DOOR TRIM TO RUN ALL THE WAY TO THE BOTTOM OF THE SILL OR THRESHOLD. PRICE FOR THIS PREP IS $2.40 LIST.

U- NOTCH “TIMELY NOTCH”

U-NOTCH PREP- THIS PREP REMOVES A “U” SHAPED PORTION OF A SILL OR THRESHOLD TO ALLOW THE SILL OR THRESHOLD TO FIT AROUND THE STOP PORTION OF THE FRAME. IT IS ALSO KNOWN AS A “TIMELY NOTCH”. PRICE FOR THIS PREP IS $3.50 LIST.


COMBO SILL PREPS

MULL PREP “TYPICAL FOR SIDELITE UNITS”

MULLION PREP- USED FOR SIDELITES UNITS. CUSTOMER TO PROVIDE A DETAILED DRAWING FOR FABRICATION. THE MILLED AREA IS 1-1/2” WIDE TO ACCEPT BACK TO BACK FRAMES. PRICE FOR THIS PREP IS $4.75 LIST

WOOD BLOCK PREP

WOOD BLOCK PREP- 2 WOOD BLOCKS ON THE ENDS OF A NET LENGTH SILL ALLOWS THE NAILING OF THE FRAME TO THE SILL. THE BLOCKS ARE PRESSURE TREATED AND GLUED IN PLACE. PRICE FOR THIS PREP IS $5.50 LIST.

FLAT FLOOR RIP “RIPS FRONT LIP OFF SILL”

FLAT FLOOR RIP - REMOVES THE FRONT LEG OF A COMBO SILL SO THE SILL CAN BE USED ON AN INTERIOR WALL WHERE THE FLOOR IS THE SAME HEIGHT ON BOTH SIDES OF THE WALL. PRICE FOR THIS PREP IS $2.20 LIST


COMBO INSWING SILLS

DRAWINGS NOT TO SCALE

S-51 FINISHES MILL, BRIGHT DIP GOLD, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ USE 3-5/8”- 4-7/8” WIDE FRAMES *QUIKSHIP ITEM*

BLUE TAPE AVAILABLE S-56 FINISHES MILL, BRIGHT DIP GOLD, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ USE 4-3/8”- 5-5/8” WIDE FRAMES *QUIKSHIP ITEM*

BLUE TAPE AVAILABLE


COMBO INSWING SILLS PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

S-51 $0.40 $0.55 $0.57 $0.67 $1.30 S-56 $0.43 $0.57 $0.60 $0.72 $1.40

COMBO INSWING SILLS PER PIECE LIST PRICE 0.8

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

S-51 30” $12.00 $16.50 $17.10 $20.10 $39.00 31-1/2” $13.40 $18.13 $18.76 $21.91 $41.75 32” $12.80 $17.60 $18.24 $21.44 $41.60 33-1/2” $14.20 *$19.23 $19.90 $23.25 $44.35 36” $14.40 $19.80 $20.52 $24.12 $46.80 37-1/2” $15.80 *$21.43 $22.18 $25.93 $49.55 BLUE TAPE = ADD $0.35 PER FOOT LIST


*HIGHLITED PRICES ARE QUICKSHIP PRODUCTS


COMBO INSWING SILLS


S-67 FINISHES MILL, BRIGHT DIP GOLD, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ USE 5-1/2”- 6-1/2” WIDE FRAMES *QUIKSHIP ITEM*

BLUE TAPE AVAILABLE S-76 FINISHES MILL, BRIGHT DIP GOLD, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ USE 6-3/8”- 7-5/8” WIDE FRAMES *QUIKSHIP ITEM*

BLUE TAPE AVAILABLE



PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

S-67 $0.54 $0.71 $0.75 $0.88 $1.55 S-76 $0.56 $0.75 $0.80 $0.93 $1.75


PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL



*HIGHLITED PRICES ARE QUICKSHIP PRODUCTS


COMBO INSWING SILLS


S-87 FINISHES MILL, BRONZE, WHITE STOCK LENGTH = 16’ USE 7-1/4”- 8-5/8” WIDE FRAMES

BLUE TAPE AVAILABLE T-51 FINISHES MILL, BRONZE STOCK LENGTH = 16’ USE 3-5/8”- 4-7/8” WIDE FRAMES

BLUE TAPE AVAILABLE



PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

S-87 $1.25 $1.40 $1.65 N/A N/A T-51 $0.69 $0.89 N/A N/A N/A


PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

S-87 30” $37.50 $42.00 $49.50 N/A N/A 31-1/2” $40.68 $45.40 $53.28 N/A N/A 32” $40.00 $44.80 $52.80 N/A N/A 33-1/2” $43.18 $48.20 $56.58 N/A N/A 36” $45.00 $50.40 $59.40 N/A N/A 37-1/2” $48.18 $53.80 $63.18 N/A N/A BLUE TAPE = ADD $0.85 PER FOOT LIST

T-51 30” $20.70 $26.70 N/A N/A N/A 32” $22.08 $28.48 N/A N/A N/A 36” $24.84 $32.04 N/A N/A N/A 48” $33.12 $42.72 N/A N/A N/A BLUE TAPE = ADD $0.45 PER FOOT LIST


COMBO INSWING SILL RISER


SR-1 FINISHES MILL, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ 9/16” SILL RISER FOR COMBO SILL OVERALL HEIGHT 1- 11/16”


COMBO INSWING SILL RISER PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

SR-1 $0.19 $0.26 $0.27 $0.30 $0.44

COMBO INSWING SILL RISER PER PIECE LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

SR-1 30” $5.70 $7.80 $8.10 $9.00 $13.20 32” $6.08 $8.32 $8.64 $9.60 $14.08 36” $6.84 $9.36 $9.72 $10.80 $15.84 42” $7.98 $10.92 $11.34 $12.60 $18.48 48” $9.12 $12.48 $12.96 $14.40 $21.12 60” $11.40 $15.60 $16.20 $18.00 $26.40 72” $13.68 $18.72 $19.44 $21.60 $31.68


WATER RETURN INSWING SILLS

W-51 FINISHES MILL, BRONZE STOCK LENGTH = 16’ USE 4-3/8”- 5-1/2” WIDE FRAMES

BLUE TAPE AVAILABLE W-67 FINISHES MILL, BRONZE STOCK LENGTH = 16’ USE 5”- 6-1/4” WIDE FRAMES

BLUE TAPE AVAILABLE WATER RETURN SILL PAN 30 GA. GALVANIZED “STANDARD SILL PAN IS 6” LONGER THAN SILL.”



WATER RETURN INSWING SILLS PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

W-51 $0.49 $0.67 N/A N/A N/A W-67 $0.56 $0.78 N/A N/A N/A

SILL PAN $0.046 N/A N/A N/A N/A

WATER RETURN INSWING SILLS PER PIECE LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

W-51 30” $14.70 $20.10 N/A N/A N/A 32” $15.68 $21.44 N/A N/A N/A 36” $17.64 $24.12 N/A N/A N/A 73” $35.77 $48.91 N/A N/A N/A

W-67 30” $16.80 $23.40 N/A N/A N/A 32” $17.92 $24.96 N/A N/A N/A 36” $20.16 $28.08 N/A N/A N/A 73” $40.88 $56.94 N/A N/A N/A


ADJUSTABLE AND EXTENDABLE SILLS


ADJUSTABLE SILLS

A-35 FINISHES MILL, BRONZE STOCK LENGTH = 10’ NON-EXTENDABLE

BLUE TAPE AVAILABLE A-45 FINISHES MILL, BRONZE STOCK LENGTH = 10’ EXTENDS FROM 4-1/2" TO 7-1/2"

BLUE TAPE AVAILABLE A-55 FINISHES MILL, BRONZE STOCK LENGTH = 10’ EXTENDS FROM 5-3/4" TO 8-3/4"

BLUE TAPE AVAILABLE

OPTION FOR ADJUSTABLE SILLS… CHOICE OF OAK OR ALUMINUM RISER.


ADJUSTABLE SILLS PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

A-35 $0.63 $0.83 N/A N/A N/A A-45 $0.65 $0.85 N/A N/A N/A A-55 $0.80 $0.95 N/A N/A N/A

ADJUSTABLE SILLS PER PIECE LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

A-35 32” $20.16 $26.56 N/A N/A N/A 36” $22.68 $29.88 N/A N/A N/A 73” $45.99 $60.59 N/A N/A N/A BLUE TAPE = ADD $0.45 PER FOOT LIST

A-45 32” $20.80 $27.20 N/A N/A N/A 36” $23.40 $30.60 N/A N/A N/A 73” $47.45 $62.05 N/A N/A N/A BLUE TAPE = ADD $0.45 PER FOOT LIST A-55 32” $25.60 $30.40 N/A N/A N/A 36” $28.80 $34.20 N/A N/A N/A 73” $58.40 $69.35 N/A N/A N/A BLUE TAPE = ADD $0.45 PER FOOT LIST


NON-ADJUSTABLE EXTENDABLE SILL

F-56 FINISHES MILL, BRONZE STOCK LENGTH = 15’-6” EXTENDS FROM 5-5/8” TO 8-5/8”

BLUE TAPE AVAILABLEDRAWINGS NOT TO SCALE


NON-ADJUSTABLE

EXTENDABLE SILL PER INCH LIST PRICE

PROFILE MILL FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT DIP

GOLD SATIN

NICKEL

F-56 $0.50 $0.68 $0.69 N/A N/A

NON-ADJUSTABLE EXTENDABLE SILL PER PIECE LIST PRICE

0


ANODIZED

WHITE POWDER

COAT BRIGHT DIP

GOLD SATIN

NICKEL

F-56 30” $15.00 $20.40 $20.70 N/A N/A 32” $16.00 $21.76 $22.08 N/A N/A 36” $18.00 $24.48 $24.84 N/A N/A 60” $30.00 $40.80 $41.40 N/A N/A 72” $36.00 $48.96 $49.68 N/A N/A


SILL EXTENDERS FOR

A-45, A-55, F-56

SE-34 FINISHES MILL, BRONZE STOCK LENGTH = 16’





SILL EXTENDERS FOR A-45, A-55, F-56 PER INCH LIST PRICE


ANODIZED

WHITE POWDER

COAT BRIGHT DIP

GOLD SATIN

NICKEL

SE-34 $0.20 $0.30 $0.31 N/A N/A SE-20 $0.22 $0.33 $0.34 N/A N/A SE-30 $0.29 $0.37 $0.38 N/A N/A

SILL EXTENDERS FOR A-45, A-55, F-56 PER PIECE LIST PRICE


ANODIZED

WHITE POWDER

COAT BRIGHT DIP

GOLD SATIN

NICKEL

SE-34 32” $6.40 $9.60 $9.92 N/A N/A 36” $7.20 $10.80 $11.16 N/A N/A 72” $14.40 $21.60 $22.32 N/A N/A SE-20 32” $7.04 $10.56 $10.88 N/A N/A 36” $7.92 $11.88 $12.24 N/A N/A 72” $15.84 $23.76 $24.48 N/A N/A

SE-30 32” $9.28 $11.84 $12.16 N/A N/A 36” $10.44 $13.32 $13.68 N/A N/A 72” $20.88 $26.64 $27.36 N/A N/A


RESIDENTIAL THRESHOLDS

PREP-105 “SCREW HOLES FOR RESIDENTIAL OR HANDICAP THRESHOLDS”

PREP 105 - CENTER SCREW HOLES FOR RESIDENTIAL AND HANDICAP THRESHOLDS. 3 HOLES ARE STANDARD ON ALL THRESHOLDS UP TO 48” AND 4 HOLES FOR SIZES OVER 48”. THERE IS NO CHARGE FOR THIS PREP



T-30 FINISHES MILL, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 15’-6” “DROP IN THRESHOLD INSTALLED AFTER DOOR AFTER IS HUNG IN OPENING”

NOTE: Sill Nose can be used with this profile. T-40 FINISHES MILL, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 15’-6” “DROP IN THRESHOLD INSTALLED AFTER DOOR AFTER IS HUNG IN OPENING”

NOTE: Sill Nose can be used with this profile.

T-36 FINISHES MILL, BRONZE STOCK LENGTH = 15’-6” “DROP IN THRESHOLD INSTALLED AFTER DOOR AFTER IS HUNG IN OPENING”




RESIDENTIAL THRESHOLDS PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

T-30 $0.24 $0.31 $0.32 N/A $0.80 T-40 $0.27 $0.38 $0.39 $0.46 $0.98 T-36 $0.30 $0.37 N/A N/A N/A

RESIDENTIAL THRESHOLDS PER PIECE LIST PRICE 1.3

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL T-30 30” $7.20 $9.30 $9.60 N/A $24.00 32” $7.68 $9.92 $10.24 N/A $25.60 36” $8.64 $11.16 $11.52 N/A $28.80 48” $11.52 $14.88 $15.36 N/A $38.40 60” $14.40 $18.60 $19.20 N/A $48.00 72” $17.28 $22.32 $23.04 N/A $57.60 T-40 30” $8.10 $11.40 $11.70 $13.80 $29.40 32” $8.64 $12.16 $12.48 $14.72 $31.36 36” $9.72 $13.68 $14.04 $16.56 $35.28 48” $12.96 $18.24 $18.72 $22.08 $47.04 60” $16.20 $22.80 $23.40 $27.60 $58.80 72” $19.44 $27.36 $28.08 $33.12 $70.56 T-36 30” $9.00 $11.10 N/A N/A N/A 32” $9.60 $11.84 N/A N/A N/A 36” $10.80 $13.32 N/A N/A N/A 48” $14.40 $17.76 N/A N/A N/A 60” $18.00 $22.20 N/A N/A N/A 72” $21.60 $26.64 N/A N/A N/A



T-35 FINISHES MILL, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 15’-6” “DROP IN THRESHOLD INSTALLED AFTER DOOR AFTER IS HUNG IN OPENING”


T-39 FINISHES MILL, BRONZE, WHITE STOCK LENGTH = 15’-6” “DROP IN THRESHOLD INSTALLED AFTER DOOR AFTER IS HUNG IN OPENING”


T-39W FINISHES MILL, BRONZE, WHITE STOCK LENGTH = 15’-6” “WATER RETURN RESIDENTIAL THRESHOLD”




RESIDENTIAL THRESHOLDS PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

T-35 $0.24 $0.31 $0.32 $0.41 $0.82 T-39 $0.30 $0.42 $0.43 $0.49 N/A

T-39W $0.63 $0.80 $0.80 N/A N/A

RESIDENTIAL THRESHOLDS PER PIECE LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

T-35 30” $7.20 $9.30 $9.60 $12.30 $24.60 32” $7.68 $9.92 $10.24 $13.12 $26.24 36” $8.64 $11.16 $11.52 $14.76 $29.52 48” $11.52 $14.88 $15.36 $19.68 $39.36 60” $14.40 $18.60 $19.20 $24.60 $49.20 72” $17.28 $22.32 $23.04 $29.52 $59.04 T-39 30” $9.00 $12.60 $12.90 $14.70 N/A 32” $9.60 $13.44 $13.76 $15.68 N/A 36” $10.80 $15.12 $15.48 $17.64 N/A 48” $14.40 $20.16 $20.64 $23.52 N/A 60” $18.00 $25.20 $25.80 $29.40 N/A 72” $21.60 $30.24 $30.96 $35.28 N/A T-39W 30” $18.90 $24.00 $24.00 N/A N/A 32” $20.16 $25.60 $25.60 N/A N/A 36” $22.68 $28.80 $28.80 N/A N/A 48” $30.24 $38.40 $38.40 N/A N/A 60” $37.80 $48.00 $48.00 N/A N/A 72” $45.36 $57.60 $57.60 N/A N/A


SILL NOSING

SN-26 FINISHES MILL, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’

SN-45 FINISHES MILL, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’

NOTE: SILL NOSING CAN BE USED WITH ALMOST ALL SILLS AND THRESHOLDS WHERE ADDITIONAL DEPTH IS REQUIRED TO MEET WALL REQUIREMENTS.

INSIDE OUTSIDE



SILL NOSING PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

SN-26 $0.17 $0.24 $0.25 $0.32 $0.69 SN-45 $0.23 $0.35 $0.38 $0.55 $0.97

SILL NOSING PER PIECE LIST PRICE 1.3

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

SN-26 30” $5.10 $7.20 $7.50 $9.60 $20.70 32” $5.44 $7.68 $8.00 $10.24 $22.08 36” $6.12 $8.64 $9.00 $11.52 $24.84 48” $8.16 $11.52 $12.00 $15.36 $33.12 60” $10.20 $14.40 $15.00 $19.20 $41.40 72” $12.24 $17.28 $18.00 $23.04 $49.68

SN-45 30” $6.90 $10.50 $11.40 $16.50 $29.10 32” $7.36 $11.20 $12.16 $17.60 $31.04 36” $8.28 $12.60 $13.68 $19.80 $34.92 48” $11.04 $16.80 $18.24 $26.40 $46.56 60” $13.80 $21.00 $22.80 $33.00 $58.20 72” $16.56 $25.20 $27.36 $39.60 $69.84


RESIDENTIAL THRESHOLDS- INTERLOCK

TI-625 FINISHES BRONZE

TI-875 FINISHES MILL, BRONZE, SATIN NICKEL

J-HOOK “USED ON BOTTOM OF DOOR TO INTERLOCK WITH TOP OF THRESHOLD”

SILL PAN 30 GA. GALVANIZED “STANDARD SILL PAN IS 6” LONGER THAN SILL.”



RESIDENTIAL THRESHOLDS- INTERLOCK PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT DIP

GOLD SATIN

NICKEL

TI-625 N/A $1.01 N/A N/A N/A TI-875 $0.73 $1.05 N/A N/A $1.10

J-HOOK $0.26 N/A N/A N/A N/A SILL PAN $0.05 N/A N/A N/A N/A

RESIDENTIAL THRESHOLDS- INTERLOCK PER PIECE LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT DIP

GOLD SATIN

NICKEL

TI-625 30” N/A $30.30 N/A N/A N/A 32” N/A $32.32 N/A N/A N/A 36” N/A $36.36 N/A N/A N/A 48” N/A $48.48 N/A N/A N/A 60” N/A $60.60 N/A N/A N/A 72” N/A $72.72 N/A N/A N/A

TI-875 30” $21.90 $31.50 N/A N/A $33.00 32” $23.36 $33.60 N/A N/A $35.20 36” $26.28 $37.80 N/A N/A $39.60 48” $35.04 $50.40 N/A N/A $52.80 60” $43.80 $63.00 N/A N/A $66.00 72” $52.56 $75.60 N/A N/A $79.20


OUTSWING SILLS

PREP-104 “SCREW HOLES FOR OUTSWING SILLS”

PREP 104- END AND CENTER SCREW HOLE PREPS FOR OUTSWING SILLS. 3 HOLES ON EACH END AND 1 CENTER HOLE FOR SIZES UP TO 49 ½” WITH 2 CENTER HOLES OVER 49 ½” LENGTH. THERE IS NO CHARGE FOR THIS

PREP.


OUTSWING SILLS

SO-47 FINISHES MILL, BRONZE, WHITE STOCK LENGTH = 16’ USE 4-1/8”- 4-5/8” WIDE FRAMES

BLUE TAPE AVAILABLE SO-55 FINISHES MILL, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ USE 4-5/8”- 5-1/4” WIDE FRAMES



OUSWING SILL PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

SO-47 $0.41 $0.61 $0.62 N/A N/A SO-55 $0.43 $0.63 $0.64 N/A N/A

OUSWING SILL PER PIECE LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

SO-47 30” $12.30 $18.30 $18.60 N/A N/A 32” $13.12 $19.52 $19.84 N/A N/A 36” $14.76 $21.96 $22.32 N/A N/A 48” $19.68 $29.28 $29.76 N/A N/A 60” $24.60 $36.60 $37.20 N/A N/A 72” $29.52 $43.92 $44.64 N/A N/A



OUTSWING SILLS

SO-66 FINISHES MILL, BRONZE, WHITE STOCK LENGTH = 16’ USE 6-1/2”- 7-1/4” WIDE FRAMES

BLUE TAPE AVAILABLE SO-64 FINISHES MILL, BRONZE, WHITE STOCK LENGTH = 16’ USE 6-1/2”- 7-1/4” WIDE FRAMES “DESIGNED FOR A 1 ¾” DOOR”



OUSWING SILL PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

SO-66 $0.49 $0.67 $0.68 N/A N/A SO-64 $0.48 $0.66 $0.68 $0.89 N/A

OUSWING SILL PER PIECE LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL


SO-64 30” $14.40 $19.80 $20.40 $26.70 N/A 32” $15.36 $21.12 $21.76 $28.48 N/A 36” $17.28 $23.76 $24.48 $32.04 N/A 48” $23.04 $31.68 $32.64 $42.72 N/A 60” $28.80 $39.60 $40.80 $53.40 N/A 72” $34.56 $47.52 $48.96 $64.08 N/A


SPECIALTY OUTSWING SILLS

SO-32 FINISHES MILL, BRONZE, WHITE STOCK LENGTH = 16’

SO-46 FINISHES MILL, BRONZE, WHITE STOCK LENGTH = 16’ “TYPICALLY USED AS A UTILITY DOOR SILL I.E. WATER HEATER CLOSET”

SO-31 FINISHES MILL, BRONZE STOCK LENGTH = 16’



SPECIALTY OUTSWING SILLS PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

SO-32 $0.31 $0.46 $0.47 N/A N/A SO-46 $0.41 $0.61 $0.62 N/A N/A SO-31 $0.55 $0.74 N/A N/A N/A

SPECIALTY OUTSWING SILLS PER PIECE LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

SO-32 30” $9.30 $13.80 $14.10 N/A N/A 32” $9.92 $14.72 $15.04 N/A N/A 36” $11.16 $16.56 $16.92 N/A N/A 48” $14.88 $22.08 $22.56 N/A N/A 60” $18.60 $27.60 $28.20 N/A N/A 72” $22.32 $33.12 $33.84 N/A N/A SO-46 30” $12.30 $18.30 $18.60 N/A N/A 32” $13.12 $19.52 $19.84 N/A N/A 36” $14.76 $21.96 $22.32 N/A N/A 48” $19.68 $29.28 $29.76 N/A N/A 60” $24.60 $36.60 $37.20 N/A N/A 72” $29.52 $43.92 $44.64 N/A N/A SO-31 30” $16.50 $22.20 N/A N/A N/A 32” $17.60 $23.68 N/A N/A N/A 36” $19.80 $26.64 N/A N/A N/A 48” $26.40 $35.52 N/A N/A N/A 60” $33.00 $44.40 N/A N/A N/A 72” $39.60 $53.28 N/A N/A N/A


HANDICAP THRESHOLDS

PREP-105 SCREW HOLES FOR RESIDENTIAL OR HANDICAP THRESHOLDS

PREP 105- CENTER SCREW HOLES FOR RESIDENTIAL AND HANDICAP THRESHOLDS. 3 HOLES ARE STANDARD ON ALL THRESHOLDS UP TO 48” AND 4 HOLES FOR SIZES OVER 48”. THERE IS NO CHARGE FOR THIS PREP


1/4” HANDICAP THRESHOLDS

T-42 FINISHES MILL, BRONZE, WHITE STOCK LENGTH = 16’

BLUE TAPE AVAILABLE T-50 FINISHES MILL, BRONZE, WHITE STOCK LENGTH = 16’



BLUE TAPE AVAILABLE DRAWINGS NOT TO SCALE


1/4" HANDICAP THRESHOLDS PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL T-42 $0.39 $0.62 $0.64 N/A N/A T-50 $0.46 $0.68 $0.70 N/A N/A T-60 $0.63 $0.85 $0.87 N/A N/A T-70 $0.88 $1.13 $1.15 N/A N/A

1/4" HANDICAP THRESHOLDS PER PIECE LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL T-42 30” $11.70 $18.60 $19.20 N/A N/A 32” $12.48 $19.84 $20.48 N/A N/A 36” $14.04 $22.32 $23.04 N/A N/A 48” $18.72 $29.76 $30.72 N/A N/A T-50 30” $13.80 $20.40 $21.00 N/A N/A 32” $14.72 $21.76 $22.40 N/A N/A 36” $16.56 $24.48 $25.20 N/A N/A 48” $22.08 $32.64 $33.60 N/A N/A T-60 30” $18.90 $25.50 $26.10 N/A N/A 32” $20.16 $27.20 $27.84 N/A N/A 36” $22.68 $30.60 $31.32 N/A N/A 48” $30.24 $40.80 $41.76 N/A N/A T-70 30” $26.40 $33.90 $34.50 N/A N/A 32” $28.16 $36.16 $36.80 N/A N/A 36” $31.68 $40.68 $41.40 N/A N/A 48” $42.24 $54.24 $55.20 N/A N/A

BLUE TAPE = ADD $0.36 PER FOOT LIST




BLUE TAPE AVAILABLE T-90 FINISHES MILL, BRONZE STOCK LENGTH = 16’


BLUE TAPE AVAILABLE DRAWINGS NOT TO SCALE


1/4" HANDICAP THRESHOLDS PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

T-80 $1.02 $1.30 $1.35 N/A N/A T-90 $1.21 $1.51 N/A N/A N/A

T-100 $1.39 $1.78 N/A N/A N/A

1/4" HANDICAP THRESHOLDS PER PIECE LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

T-80 30” $30.60 $39.00 $40.50 N/A N/A 32” $32.64 $41.60 $43.20 N/A N/A 36” $36.72 $46.80 $48.60 N/A N/A 48” $48.96 $62.40 $64.80 N/A N/A T-90 30” $36.30 $45.30 N/A N/A N/A 32” $38.72 $48.32 N/A N/A N/A 36” $43.56 $54.36 N/A N/A N/A 48” $58.08 $72.48 N/A N/A N/A T-100 30” $41.70 $53.40 N/A N/A N/A 32” $44.48 $56.96 N/A N/A N/A 36” $50.04 $64.08 N/A N/A N/A 48” $66.72 $85.44 N/A N/A N/A



1/2" HANDICAP THRESHOLD PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

T-45 $0.39 $0.62 $0.64 N/A N/A T-55 $0.46 $0.68 $0.70 $0.94 N/A T-65 $0.63 $0.85 $0.87 N/A N/A T-75 $0.88 $1.13 $1.15 N/A N/A

1/2" HANDICAP THRESHOLD PER PIECE LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL T-45 30” $11.70 $18.60 $19.20 N/A N/A 32” $12.48 $19.84 $20.48 N/A N/A 36” $14.04 $22.32 $23.04 N/A N/A 48” $18.72 $29.76 $30.72 N/A N/A T-55 30” $13.80 $20.40 $21.00 $28.20 N/A 32” $14.72 $21.76 $22.40 $30.08 N/A 36” $16.56 $24.48 $25.20 $33.84 N/A 48” $22.08 $32.64 $33.60 $45.12 N/A T-65 30” $18.90 $25.50 $26.10 N/A N/A 32” $20.16 $27.20 $27.84 N/A N/A 36” $22.68 $30.60 $31.32 N/A N/A 48” $30.24 $40.80 $41.76 N/A N/A T-75 30” $26.40 $33.90 $34.50 N/A N/A 32” $28.16 $36.16 $36.80 N/A N/A 36” $31.68 $40.68 $41.40 N/A N/A 48” $42.24 $54.24 $55.20 N/A N/A








BLUE TAPE AVAILABLE T-105 FINISHES MILL, BRONZE STOCK LENGTH = 16’ “TILE FLOOR APPLICATIONS”

BLUE TAPE AVAILABLE


1/2" HANDICAP THRESHOLD PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

T-85 $1.02 $1.30 $1.35 N/A N/A T-95 $1.12 $1.43 N/A N/A N/A

T-104 $1.28 $1.69 N/A N/A N/A T-105 $0.47 $0.69 N/A N/A N/A

1/2" HANDICAP THRESHOLD PER PIECE LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL T-85 30” $30.60 $39.00 $40.50 N/A N/A 32” $32.64 $41.60 $43.20 N/A N/A 36” $36.72 $46.80 $48.60 N/A N/A 48” $48.96 $62.40 $64.80 N/A N/A T-95 30” $33.60 $42.90 N/A N/A N/A 32” $35.84 $45.76 N/A N/A N/A 36” $40.32 $51.48 N/A N/A N/A 48” $53.76 $68.64 N/A N/A N/A T-104 30” $38.40 $50.70 N/A N/A N/A 32” $40.96 $54.08 N/A N/A N/A 36” $46.08 $60.84 N/A N/A N/A 48” $61.44 $81.12 N/A N/A N/A T-105 30” $14.10 $20.70 N/A N/A N/A 32” $15.04 $22.08 N/A N/A N/A 36” $16.92 $24.84 N/A N/A N/A 48” $22.56 $33.12 N/A N/A N/A



DOOR SHOE PREPS

PREP-103 “FULL NOTCH- 1/2” TAKEN FROM EACH END OF DOOR BOTTOM”

PREP 103- THIS PREP REMOVES ½” OF THE DRIP CAP AND FRONT OF DOOR SHOE. REMOVAL OF THIS MATERIAL PREVENTS THE INTERFERENCE OF THE DOOR BOTTOM WITH THE STOP PORTION OF AN EXTERIOR FRAME. PRICE FOR THIS PREP IS $ .90 LIST

HALF NOTCH “DRIP CAP REMOVAL”

HALF NOTCH- THIS PREP REMOVES A ½” PORTION OF THE DRIP CAP ONLY ON THE DOOR SHOE. PRICE FOR THIS PREP IS $ .90 LIST

WEEP HOLE PREP “DRAIN/ WEEP HOLES IN DOOR SHOES”

WEEP HOLE PREP- PROVIDES A DRAIN FOR WATER THAT BUILDS UP IN THE DOOR SHOE WHEN A DOOR GETS DIRECT EXPOSURE. 3 HOLES ARE STARDARD PRICE FOR THIS PREP IS $ 1.00 LIST


DOOR SHOES

DS-118 FINISHES MILL, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 15’-6”

DS-138 FINISHES MILL, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 15’-6”

DS-134 FINISHES MILL, BRIGHT DIP GOLD, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 15’-6” *QUIKSHIP*



DOOR SHOES PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

DS-118 $0.145 $0.23 $0.24 $0.30 $0.65 DS-138 $0.17 $0.255 $0.255 $0.31 $0.73 DS-134 $0.175 $0.255 $0.255 $0.32 $0.75

DOOR SHOES THRESHOLDS PER PIECE LIST PRICE 0.7

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

DS-118 29-3/4” $5.05 $7.60 $7.90 $9.70 $20.20 31-3/4” $5.34 $8.06 $8.38 $10.30 $21.50 35-3/4” $5.92 $8.98 $9.34 $11.50 $24.10 41-3/4” $6.79 $10.36 $10.78 $13.30 $28.00 47-3/4” $7.66 $11.74 $12.22 $15.10 $31.90 DS-138 29-3/4” $5.80 $8.35 $8.35 $10.00 $22.60 31-3/4” $6.14 $8.86 $8.86 $10.62 $24.06 35-3/4” $6.82 $9.88 $9.88 $11.86 $26.98 41-3/4” $7.84 $11.41 $11.41 $13.72 $31.36 47-3/4” $8.86 $12.94 $12.94 $15.58 $35.74 DS-134 29-3/4” $5.95 *$8.35 $8.35 $10.30 $23.20 31-3/4” *$6.30 *$8.86 $8.86 $10.94 $24.70 35-3/4” *$7.00 *$9.88 $9.88 $12.22 $27.70 41-3/4” $8.05 $11.41 $11.41 $14.14 $32.20 47-3/4” $9.10 $12.94 $12.94 $16.06 $36.70

PRICES INCLUDE PREP 103 OR HALF NOTCH. *HIGHLITED PRICES ARE QUICKSHIP PRODUCTS


DOOR SHOES


DST-134 FINISHES MILL, BRONZE STOCK LENGTH = 15’-6” “COMBINATION DOOR SHOE AND KICK PLATE ALSO CALLED A GOOF DOOR SHOE”

DS-135 FINISHES MILL, BRONZE, WHITE STOCK LENGTH = 15’-6”

DS-185 FINISHES MILL, BRONZE, WHITE STOCK LENGTH = 15’-6”



PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

DST-134 $0.80 $0.99 N/A N/A N/A DS-135 $0.21 $0.35 $0.35 N/A N/A DS-185 $0.19 $0.28 $0.30 $0.34 N/A

DOOR SHOES THRESHOLDS PER PIECE LIST PRICE 0.7

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

DST-134 29-3/4” $24.70 $30.40 N/A N/A N/A 31-3/4” $26.30 $32.38 N/A N/A N/A 35-3/4” $29.50 $36.34 N/A N/A N/A 41-3/4” $34.30 $42.28 N/A N/A N/A 47-3/4” $39.10 $48.22 N/A N/A N/A

DS-135 *PRICE INCLUDES PREP-103 OF HALF NOTCH 29-3/4” $7.00 $11.20 $11.20 N/A N/A 31-3/4” $7.42 $11.90 $11.90 N/A N/A 35-3/4” $8.26 $13.30 $13.30 N/A N/A 41-3/4” $9.52 $15.40 $15.40 N/A N/A 47-3/4” $10.78 $17.50 $17.50 N/A N/A

DS-185 29-3/4” $5.70 $8.40 $9.00 $10.20 N/A 31-3/4” $6.08 $8.96 $9.60 $10.88 N/A 35-3/4” $6.84 $10.08 $10.80 $12.24 N/A 41-3/4” $7.98 $11.76 $12.60 $14.28 N/A 47-3/4” $9.12 $13.44 $14.40 $16.32 N/A


DOOR SHOES

DS-225 FINISHES MILL, BRONZE, WHITE, SATIN NICKEL STOCK LENGTH = 15’-6” FITS 2 ¼” DOOR

DS-136 FINISHES MILL CONCEALED DOOR SWEEP

DS-78 FINISHES MILL, BRONZE, WHITE, BRIGHT DIP GOLD




PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

DS-225 $0.70 $0.75 $0.97 N/A $0.82 DS-136 $0.23 N/A N/A N/A N/A DS-78 $0.13 $0.18 $0.19 $0.23 N/A

DOOR SHOES PER PIECE LIST PRICE 0.9

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

DS-225 29-3/4” $21.90 $23.40 $30.00 N/A $25.50 31-3/4” $23.30 $24.90 $31.94 N/A $27.14 35-3/4” $26.10 $27.90 $35.82 N/A $30.42 41-3/4” $30.30 $32.40 $41.64 N/A $35.34 47-3/4” $34.50 $36.90 $47.46 N/A $40.26

DS-136 29-3/4” $6.90 N/A N/A N/A N/A 31-3/4” $7.36 N/A N/A N/A N/A 35-3/4” $8.28 N/A N/A N/A N/A 41-3/4” $9.66 N/A N/A N/A N/A 47-3/4” $11.04 N/A N/A N/A N/A

DS-78 29-3/4” $3.90 $5.40 $5.70 $6.90 N/A 31-3/4” $4.16 $5.76 $6.08 $7.36 N/A 35-3/4” $4.68 $6.48 $6.84 $8.28 N/A 41-3/4” $5.46 $7.56 $7.98 $9.66 N/A 47-3/4” $6.24 $8.64 $9.12 $11.04 N/A


DOOR DRIP CAPS

DSD-1 FINISHES MILL, BRONZE

DSRD-1 FINISHES MILL, BRONZE “OUTSWING DOOR RAIN CAP” ORDER WILL BE SUPPLIED 6” LONGER/WIDER THAN DOOR WIDTH



DOOR DRIP CAPS PER INCH LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

DSD-1 $0.27 $0.37 N/A N/A N/A DSRD-1 $0.37 $0.47 N/A N/A N/A

DOOR DRIP CAPS PER PIECE LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

DSD-1 30” $8.10 $11.10 N/A N/A N/A 32” $8.64 $11.84 N/A N/A N/A 36” $9.72 $13.32 N/A N/A N/A 42” $11.34 $15.54 N/A N/A N/A 48” $12.96 $17.76 N/A N/A N/A

DSRD-1 *SUPPLIED 6” LONGER/WIDER THEN DOOR WIDTH 30” (36”) $13.32 $16.92 N/A N/A N/A 32” (38”) $14.06 $17.86 N/A N/A N/A 36” (42”) $15.54 $19.74 N/A N/A N/A 42” (48”) $17.76 $22.56 N/A N/A N/A 48” (54”) $19.98 $25.38 N/A N/A N/A


AUTOMATIC DOOR BOTTOMS

ADB-1 FINISHES MILL, BRONZE “SURFACE MOUNTED AUTOMATIC DOOR BOTTOM”

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT

BRIGHT DIP

GOLD SATIN

NICKEL ADB-1 36” $54.00 $47.52 N/A N/A N/A 42” $63.00 $55.44 N/A N/A N/A

ADB-2 FINISHES MILL “MORTISED AUTOMATIC DOOR BOTTOM”

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT

BRIGHT DIP

GOLD SATIN

NICKEL ADB-2 36” $43.92 N/A N/A N/A N/A 42” $51.24 N/A N/A N/A N/A



ASTRAGALS


STANDARD INSWING ASTRAGAL

AST-1 FINISHES MILL, BRONZE, SATIN NICKEL, WHITE 80” & 96” LENGTH SPECIFIC FEATURES 6” NON-LOCKING FLUSHBOLT NON-HANDED CAN BE FIELD TRIMMED DEADBOLT PUNCH OUT AVAILABLE ½” SPACE BETWEEN DOORS PLUS CLEARANCE STRIKES NOT PROVIDED NO THERMAL BREAK

PROFILE MILL

FINISH BRONZE

ANODIZED WHITE SATIN

NICKEL

AST-1 80” $57.60 $68.00 $68.00 $144.00 96” $69.12 $81.60 $81.60 $172.80



DELUXE INSWING ASTRAGAL

AST-2 FINISHES MILL, BRONZE, WHITE 80” & 96” LENGTH SPECIFIC FEATURES 12” LOCKING FLUSHBOLT NON-HANDED CAN BE FIELD TRIMMED DEADBOLT PUNCH OUT AVAILABLE 5/8” SPACE BETWEEN DOORS PLUS CLEARANCE STRIKES NOT PROVIDED NO THERMAL BREAK 4-POINTS OF WEATHERSTRIP CONTACT CORNER PAD INCLUDED

PROFILE MILL

FINISH BRONZE


NICKEL

AST-2 80” $68.80 $81.60 $81.60 N/A 96” $82.56 $97.92 $97.92 N/A



DELUXE INSWING ASTRAGAL WITH THERMAL BREAK

AST-3 FINISHES MILL, BRONZE, WHITE 80” & 96” LENGTH SPECIFIC FEATURES THERMALLY BROKEN 12” LOCKING FLUSHBOLT NON-HANDED CAN BE FIELD TRIMMED DEADBOLT PUNCH OUT AVAILABLE 5/8” SPACE BETWEEN DOORS PLUS CLEARANCE STRIKES NOT PROVIDED 4-POINTS OF WEATHERSTRIP CONTACT CORNER PAD INCLUDED

PROFILE MILL

FINISH BRONZE


NICKEL

AST-3 80” $99.00 $103.00 $103.00 N/A 96” $118.00 $136.00 $136.00 N/A



DELUXE OUTSWING ASTRAGAL WITH THERMAL BREAK

AST-4 FINISHES MILL, BRONZE, WHITE 80” & 96” LENGTH SPECIFIC FEATURES OUTSWING T-AST MADE FOR ACTIVE DOOR WITH BEVEL OR MAY BE USED ON SQUARE EDGE ACTIVE DOOR THERMALLY BROKEN 12” LOCKING FLUSHBOLT NON-HANDED CAN BE FIELD TRIMMED 5/8” SPACE BETWEEN DOORS PLUS CLEARANCE STRIKES NOT PROVIDED 4-POINTS OF WEATHERSTRIP CONTACT CORNER PAD INCLUDED

PROFILE MILL

FINISH BRONZE


NICKEL

AST-4 80” $110.00 $125.00 $120.00 N/A 96” $132.00 $150.00 $145.00 N/A



SPECIALTY ITEMS


SPECIALTY ITEMS

POCKET DOOR STIFFENER MILL FINISH

MILL 81 7/8” - $8.20 LIST 97 7/8” - $9.80 LIST

TOP SCREEN TRACK – STT MILL, BRONZE, WHITE “USE ON SHOP BUILT PATIO DOORS”

MILL 72” - $6.48 LIST 150” - $13.50 LIST BRONZE 72” - $10.80 LIST 150” - $22.50 LIST WHITE 72” - $12.24 LIST 150” - $25.50 LIST

BOTTOM SCREEN TRACK – STB MILL, BRONZE, WHITE “USE ON SHOP BUILT PATIO DOORS”

MILL 72” - $5.76 LIST 150” - $12.00 LIST BRONZE 72” - $10.08 LIST 150” - $21.00 LIST WHITE 72” - $10.80 LIST 150” - $22.50 LIST

TOUCH-UP PAINT 12 OZ. BRONZE

$28.00 PER CAN LIST

BLUE TAPE AVAILABLE AS SURFACE PROTECTION WHILE UNDER CONSTRUCTION. “WE CAN PRE-APPLY OR SELL BY THE ROLL.”

6” – $37.80 PER ROLL LIST 7” – $38.88 PER ROLL LIST 8” – $44.28 PER ROLL LIST 9” – $47.52 PER ROLL LIST 10” – $35.19 PER ROLL LIST



FASTENERS


FASTENERS

10 X 2 OR 10 X 3 FLAT HEAD PHILLIPS SCREWS FOR FASTENING ALL SILLS/THRESHOLDS TO FLOOR

FINISHES

MILL, BRONZE, WHITE, GOLD AND SATIN NICKEL

.15 EACH LIST

#10 X 1 1/2 – LEAD SHIELD TO BE USED WITH 10 X 2 OR 10 X 3 FLAT HEAD SCREW ABOVE.

.35 EACH LIST

#6 X 5/8 PAN HEAD PHILLIPS DOOR SHOE SCREWS

FINISHES


.05 EACH LIST

#8 X 1 FLAT HEAD PHILLIPS TEK SCREW FOR ATTACHING SILL RISER TO COMBO SILL

FINISHES


.15 EACH LIST

1/4 X #2 ZINC THRESHOLD ANCHOR FOR FASTENING ALL SILLS/THRESHOLDS TO CONCRETE FLOOR. (OPTION INSTEAD OF SCREW ONLY)

.55 EACH LIST

1/4 X 1 1/4 PLASTIC ANCHOR TO BE USED WITH 2 X 10 FLAT HEAD PHILLPS SCREW

.10 EACH LIST


SCHLEGEL WEATHERSTRIP



SCHLEGEL QEBD-500 BRONZE, WHITE 125 PER BOX 82” LENGTH 0-124=$3.55 LIST 125+ = $3.00 LIST 97” LENGTH 0-124 = $4.25 LIST 125+ = $3.55 LIST

SCHLEGEL QEBD-650 BRONZE, WHITE 82” 150 PER BOX 97” 125 PER BOX 82” LENGTH 0-149 = $3.00 LIST 150+ = $2.50 LIST 97” LENGTH 0-124” = $3.65 LIST 125+ = $3.00 LIST 120” LENGTH 0-124” = $4.75 LIST 125+ = $4.00 LIST

SCHLEGEL QEBD-825 BRONZE, WHITE 82” OR 97” 100 PER BOX 82” LENGTH 0-99 = $3.80 LIST 100+ = $3.40 LIST 97” LENGTH 0-99 = $4.50 LIST 100+ = $3.60 LIST




SCHLEGEL QEBD-650 SCREW ON BRONZE, WHITE NO SCREW HOLES 36X84 $29.50 PER SET LIST

SCHLEGEL CORNER PAD COLORS: BLACK, WHITE $.55 LIST

Q-LON CORNER PAD COLOR: BLACK, WHITE $.65 LIST



PERIMETER JAMB-UP WEATHERSTRIP WS-20

WEATHERSTRIP PER FOOT LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

WS-20 $0.80 $1.40 $1.40 N/A N/A

WEATHERSTRIP BY THE SET LIST PRICE

PROFILE MILL

FINISH BRONZE

ANODIZED

WHITE POWDER

COAT BRIGHT

DIP GOLD SATIN

NICKEL

WS-20 36X80-84 $13.60 $23.80 $23.80 N/A N/A 48X80-84 $14.40 $25.20 $25.20 N/A N/A 60X80-84 $15.20 $26.60 $26.60 N/A N/A 72X80-84 $16.00 $28.00 $28.00 N/A N/A 36X96 $15.20 $26.60 $26.60 N/A N/A 48X96 $16.00 $28.00 $28.00 N/A N/A 60X96 $16.80 $29.40 $29.40 N/A N/A 72X96 $17.60 $30.80 $30.80 N/A N/A

ccbs pricebook

Documents

nana na t

nana t

notch prep prep

list prep

na nads

na nati

na nanaaaoa

na nanaw