best negotiation deals in automotive freight transportation
Post on 03-Jun-2018
218 Views
Preview:
TRANSCRIPT
-
8/13/2019 Best Negotiation Deals in Automotive Freight Transportation
1/11
1
THE BUCHAREST UNIVERSITY OF ECONOMIC STUDIES
Faculty of Business Administration (taught in foreign languages)
Negotiations ProjectBest Negotiation Deals in Automotive Freight Transportation
Professor: Realized By:
Adina Filculescu
December 2013
-
8/13/2019 Best Negotiation Deals in Automotive Freight Transportation
2/11
2
TABLE OF CONTENTS
1. Introduction - Description of the Industry Page 3
2. The Partners involved in the Negotiation Page 43. Stages of the Negotiation Page 6
4. Conclusions Page 10
5. References Page 11
-
8/13/2019 Best Negotiation Deals in Automotive Freight Transportation
3/11
3
DESCRIPTION OF THE INDUSTRY
The automotive industry is made up by large companies and organizations which are
involved in designing, manufacturing, transporting and selling of all kind of motor vehicles. It
represents one of the most important economic sector in the U.S. that contributes to the
American revenue.
For many decades, The U.S. was the leader in the automobile production. Nowadays,
even though the United States produced 8.7 million units in 2011, was completely overtaken by
China who produced 18.4 million units, followed by Japan with 8.4 million units.
Along the history, the automotive industry evolved to be dominated by three firms,
General Motors, Ford and Chrysler. They were all based in Detroit, Michigan which for many
years was the strategic point of the industry.
In the whole process of designing and manufacturing the vehicles, parties are involved
such as plants, companies, organizations, transportation companies that are being part of a
complex supply chain management very tightly linked one another.
The assembly plants are always in need of financing good and reliable trucking
companies to help them with delivering the main parts from different manufacturing companies
to their assembly factory in order to fulfill the last stage of the manufacturing process.
Like in many industries, automotive manufacturers and their suppliers usually are looking
to find the best transportation deal for it to cover even tight deadlines.
-
8/13/2019 Best Negotiation Deals in Automotive Freight Transportation
4/11
4
THE PARTNERS INVOLVED IN THE NEGOTIATION
In order to find the best transportation option, the shippers such as Ford or General
Motors usually are being helped by freight brokers or logistic brokers.
Freight brokers are federally regulated and bonded companies. They are involved in the
supply chain and distribution process by providing the shipper with the most serious and reliable
transportation companies, selected using specific criteria from a vast network.
Basically, the freight brokers do not touch the freight. They are being engaged in
helping the big manufacturers, find the best price with the best carrier for any load necessary to
be transported. But not anybody can become a freight broker. To obtain a brokerage license, a
company must purchase a surety bond in amount of $75,000 or a trust agreement with federal
motor carrier safety administration. The main purpose of the bond is to protect shippers and
carriers from fraud.
One of the well-known freight brokers is Schneider, a logistic company which is involved
in supply chain management of General Motors. Schneider Logistics has a brokerage experience
of 10 years, being involved in partnership with over 6,000 carriers.
Schneiders Selection process of trucking companies is based on specific criteria directly
connected with the federal motor carrier regulations. In order to qualify with Schneider and to be
able to sign a contract, a transportation company must prove that it has a good credit history in
the field, in terms of the size of the fleet, the safety policies adopted, the drivers qualification,
the professionalism of the people from logistic department and last but not least the good
references from other three brokers.
-
8/13/2019 Best Negotiation Deals in Automotive Freight Transportation
5/11
5
It takes time and a lot of work for a new and midsize company to get involved in the
supply chain process of automotive industry because the requirements are very hard to fulfill.
So this brings forth to our project, the intention of presenting a small company, Top One.
Co., established in 2006 and located in West Bloomfield, Michigan. The company started its
operation with ten trucks, having contracts with brokers like FEDEX, COYOTE LOGISTICS,
and CH. ROBINSON and so on. The general manager became very interested in establishing a
long term relationship with Schneider Logistics due to its posting online, on the freight websites,
available weekly shipment which would ensure at least one year of contract and daily loads for at
least five trucks.
Before starting any negotiating, there is a preparation period when parties try to get
familiar with the activity and level of performance of the other party.
As far as Schneiders concerns, it is well known by all carriers of its good reputation. The
integrity in respecting the terms of the contracts are being rated on the trucking websites as 100
percent reliability broker, the category TOP A Company. But Top One Co. cannot be put on the
same level as the other high-end companies mainly because it only has a couple few years of
activity.
So in order to prove its integrity, the transportation company opened a dialog over the
phone expressing its interest in signing a contract. It was contacted later on by the manager in
charge with carrier settlement, requesting before entering into any further negotiating process,
the company s license, insurances, and some references. Everything was checked thoroughly by
the appointed managers of Schneider, more of an understanding meaning it was like a pre-
approval stage.
-
8/13/2019 Best Negotiation Deals in Automotive Freight Transportation
6/11
6
Top One Co. faxed all the documents requested and in a couple of days it had received a
phone call from the settlement department of Schneider asking for a special meeting in order to
discuss the terms and conditions of the agreement.
At the moment of the first meeting, both parties were willing to open the dialogue as if
they already passed its first stage of trust. Their mutual interest brought upon on good
collaboration and cooperation as their basic style of negotiating.
STAGES OF THE NEGOTIATION
Stage 1: Preparation
Before starting a negotiation, preparation in all three areas is mandatory: yourself, the
other party and the industry. In our case this consists in identifying the potential interests and
issues involved both for us and the other party. We wish to negotiate a contract with Schneider
Transportation Management which in an intermediary between us, Top One and GM that
produces auto parts. The contract is an agreement that will consist in us, transporting auto parts
for GM. Some potential issues were identified: the desired number of transports per week are 5,
the duration of the contract minimum 1 year, the price per mile 2 dollars. Our negotiation
interests are set to be the following: the desired price and maintaining a long term relationship
with Schneider Transportation.
We assigned each issue to one of the four priority levels: the price is essential, the length
of the contract is important, the frequency of the loads is desirable and the party who assumes the
responsibility of late or no delivery is important. We should always start with a clear defined
BATNA and in our case we established this to $2.15 per mile.
-
8/13/2019 Best Negotiation Deals in Automotive Freight Transportation
7/11
7
Even though the other party will withdraw from the negotiation we would have other
alternatives like $2.05 and Top One Co. resistance point is $1.90, but the long term relationship
with the other party is very important for us.
If negotiation doesnt go as expected the carrier will consider the following alternative:
accept a smaller rate with the condition of making a collaboration compromise which involves
that Schneider Management will ensure us other transports from a destination we already
reached in order to not to come back with an empty truck, but with a transport for another client.
Also a research was done in order to find appropriate documentation that will help the
negotiation to focus on facts. We gathered information from different sources and found out that
Schneider Transportation Management is one of the industrys top brokers with an experience of
10 years. They have many payment programs that ensure you get paid and that the payment is
accurate. They put a high accent on safety, security and professionalism of carriers they trust
with your freight, and according to specialized transportation sites they are one of the most
appreciated brokers.
We established the four main issues that we build our negotiation on:
The initial offer of Schneider was set to be $1.90, the target point $2.05, the resistance point
$2.10 and the most ideal alternative outcome we could get without negotiating is $2.00.
Also reframing the negotiation is taken into account if the negotiation goes into the wrong
direction. With integrative reframing, the parties will try to redefine the problem in a win-win
way. This will be done be redefining what each party wants so that everyone can have what they
want at the same time, even with limited resources.
-
8/13/2019 Best Negotiation Deals in Automotive Freight Transportation
8/11
8
Stage 2: Opening session
For the stage of opening session, the 5ws were taken into account and we considered the
following:
Mr. John Murarita will speak for Schneiders party, Mrs . Mihaela Popescu will speak for
Top One, Co, and the representative for GMs receiving department will be Ms . Anca Patrascu.
The negotiation will take place in a neutral place, a rented conference room. The negotiation will
take place on the 2 nd of December 2013 at 2pm. As a final agreement only a written signed and
dated contract is accepted.
We make our initial offer which consists in a rate of $2.15 per mile, a number of 5 loads
per week and a granted one year contract.
Stage 3: Bargaining
The number of parties and number of issues are 2 critical variables that shaped our
negotiation. There were 4 main issues that conducted our negotiation: price, duration of contract,
number of transports, liability and safety issues. The negotiating parties are the representative of
Top One and the representative of Schneider Management Transportation. A representative of
GM also attended the negotiation in order to provide accurate information about the specific auto
parts that will be transported and to establish the most convenient schedule for both. Our
bargaining range was set to be in the positive settlement zone.
Tactic used was the integrative bargaining because both parties have common goals and
wish to maintain a positive long term relationship, thus it resulted in a win-win situation. It has
been created as much value as possible for both sides but also claimed as much value as possible
-
8/13/2019 Best Negotiation Deals in Automotive Freight Transportation
9/11
9
to meet our interests. Therefore it has been generated a variety of alternatives that provided
mutual gain.
Our focus was mainly on the substantive interests, and here we refer to the price, but also
on relationship interests. It has been used an Interest -Based Bargaining, following a few steps
in order to reach a favorable mutual agreement: the parties shared the information, focused on
the issues, expressed their interest, and the most important both were committed to creating a
long term relationship.
Stage 4 Settlement
The negotiation resulted in a settlement because both parties communicated well their
interests and both offer a settlement that exceeded our BATNA.
The carrier obtained a rate of $2.05 dollars per mile, 3 numbers of transports in the first week,
and 5 weekly loads for the next period with a one year contract.
Also, the company obtained a collaboration compromise, accepting a smaller rate, but
this compromise ensures that it wont have any loses and it will have a granted transport from a
destination back home. In case of delays due to different flaws, Top One took the responsibility
for providing another transport and fees paid by the carrier depending on the delay time or
otherwise the company will be liable of a claim up to $100,000 depending also on the
consequences of the time delay on the manufacturing process.
The final closing is represented by a written, signed and dated document.
-
8/13/2019 Best Negotiation Deals in Automotive Freight Transportation
10/11
10
CONCLUSIONS
We learned that during the negotiation process, both parties interests were satisfied in
obtaining all the necessary needs. The negotiation was finalized with a one year contract which
proves its trustworthiness towards each other, also build up good reputation for others to come.
From the beginning the atmosphere was relaxed and involved a lot of communication,
both parties being ready to disclose all their objectives and interest. Schneider Logistics reached
its target point of $2.05 per mile and obtain from Top One Co. full liability and responsibility in
case of delays or damage freight.
We can conclude it has more bargaining power considering the fact that the broker had
more experience in the field and a more well-established reputation. For a newcomer, Top One
Co. obtained a very good rate, a good alternative even though it was not its BATNA and most of
all getting that one year contract which will keep its activity in motion. Signing a contract with
such an important broker, it was a big step in building up its name.
What could have been gone wrong?
Transportation Company would not be willing to compromise, just only based on its own
interest. Not having any persuasion towards the broker in order to convince that its reliable
enough to fulfill the terms of the contract. On the other hand, the manager of Schneider could
have adopted an arrogant attitude, putting himself in a superior position and refusing to go below
its initial offer.
No one can guarantee a successful negotiation, but as long as parties rely on
communication, open-minded, fairness, trust and real ethical values, the chances become real.
-
8/13/2019 Best Negotiation Deals in Automotive Freight Transportation
11/11
11
REFERENCES
DeMarr, Beverly; De Janasz, Suzanne (2012). Negotiation and Dispute Resolution, Prentice Hall
Textbook
Carrell, R.M.; Heavrin, C. (2008). Negotiating Essentials. Theory, Skills and Practices, New
Jersey: Pearson&Prentice Hall Textbook
Thompson, L.L. (2005). The Mind and Heart of the Negotiator. Third Edition, International
Edition, New Jersey: Pearson& Prentice Hall
Roger Fisher, William L. Ury, Bruce Patton (Editor); (1991). Getting to Yes: Negotiating
Agreement Without Giving In.
[Charan_Devereaux,_Robert_Z._Lawrence,_Michael_D._case studies in us trade negotiations
top related