bent anchor j bolts – round hook

https://www.allfasteners.com.au/bent-anchor-j-bolts-round-hook

Print Date 02/11/2021 | Page 1 of 2

Whilst every care was taken in preparation of this guide, Allfasteners® accepts no responsibility for the accuracy of the information supplied.Copyright ©2021. The contents of this document are the exclusive copyright of Allfasteners® and may not be reproduced without prior written permission.

1800 255 349 | techadvice@allfasteners.com.au

PDS

Bent Anchor J Bolts – Round Hook

J-bolts or round hook have a round bend commonly usedin concrete as a hold bolt anchor or as part of hold downbolt cage configuration.

Round u-bolts custom manufactured from M12 to M36 indiameter to any specification. Provided usually in hotdipped galvanised finish but also can be supplied in plainsteel or made from 304 and 316 stainless steel uponrequest.

Typical dimension: Diameter (D) x Length (L) x Hook Width(C) x Hook Length (A) x Thread (T)

Compatible nuts and washers can also be specified.

Send us your specs download the RFQ sheet from the tabbelow.

https://www.allfasteners.com.au/bent-anchor-j-bolts-round-hook

1800 255 349 | techadvice@allfasteners.com.au

Print Date 02/11/2021 | Page 2 of 2

Whilst every care was taken in preparation of this guide, Allfasteners® accepts no responsibility for the accuracy of the information supplied.Copyright ©2021. The contents of this document are the exclusive copyright of Allfasteners® and may not be reproduced without prior written permission.

PRODUCT LIST

SKU Bx. Qty. Crt. Qty.

11M-JB-12

For updates & pricing visit the website.sales@allfasteners.com.au