babcock & wilcox
Post on 15-Apr-2017
546 Views
Preview:
TRANSCRIPT
3/2/2016Babcock & wilcox
boiler
Presented by Md. Mizanur rahman
Khulna university of engineering & technology (KUET)
Department of industrial engineering & management(IEM)
Roll: 1311054
CONTAINSINTRODUCTION OF BOILERHISTORYSPECIFICATION OF BOILERFEATURE OF BOILERCONSTRUCTION & WORKINGADVANTAGESDISADVANTAGEUSE
Introduction1. This is an example of water tube boiler and
is used in stationary and marine engine.
3. This boiler is used when pressure is above 10bar and steam generating capacity is required higher then 7000kg/hr.
HistoryIn 1867, Providence, Rhode Island, residents
Stephen Wilcox and his partner George Herman Babcock patented the Babcock & Wilcox Non-Explosive Boiler, which used water filled tubes and de-nucleate boiling to generate steam more safely than either under-fire or fire-tube boilers.
In 1891, Babcock & Wilcox Ltd is established as a separate United Kingdom company, to be responsible for all sales outside the US and Cuba.[7]
HISTORY
Babcock & Wilcox Co. works, Bayonne, New Jersey, circa 1919
HISTORY
1913 Babcock & Wilcox boiler section
CONSTRUCTION & WORKING
AdvantagesThe steam generation capacity of the
boiler is very high about 2000 to 40000 kg/hr.
Replacement of defective tubes is easy.
Boiler is required less space area compared to fired tube boilers.
It is used in power station for generating large quantity of steam.
ধন্যবাদTHANK YOU
top related