4-ld0266

7/8/2015 4-LD0266

http://inter-quartz.de/gb/4-LD0266.html 1/1

4-LD0266 Wireless Temperature Station

Sensors

Order additional sensors

Downloads

Instruction manual

Contact

In case of further questions you may contact us by eMail or via our

free service hotline 00800 5515 6616 from 8:00 to 17:00 CET.

Back

Back to the product overview

Troubleshooting

Problem: The red light on the front of the sensor does not briefly

f lash w hen the battery is inserted.

Solution: It is possible that the battery is not seated correctly in

the battery compartment. Firmly push dow n on the

battery w hen placing it in the compartment. The battery

must not move around in the compartment. It may be

necessary to bend the contacts in the compartment

slightly outw ard.

Problem: The outdoor temperature does not appear on the

display

Solution: Remove the batteries from the main unit and the sensor.

Wait for a few minutes. Insert the batteries into the main

unit. Wait for 5-10 minutes. Insert the battery into the

sensor.

Problem: The radio controlled time does not appear.

Solution: Leave your temperature station positioned in a

w indow s facing tow ards Frankfurt, Germany for at

least 24 hours.

Problem: The temperature show n in the display differs from the

actual temperature.

Solution: A difference of about 1C is w ell w ithin the normal

operating limits.

If possible, use a third thermometer to compare the

accuracy of the temperature.

Problem: The clock jumps to the w rong time w hen it receives the

radio signal.

Solution: Please use the "zone" feature to set the correct time

zone. Press and hold "clock". Then press "clock" tw ice

briefly. Use set/reset to set the time zone to -1.

Complete the setting by pressing Clock 7 times.

inter-quartz GmbH :: Valterweg 27A :: 65817 Eppstein :: Germany :: Tel. +49 (0) 6198 571825 :: USt-IdNr. DE 114323622 :: eMail