2008 kawasaki vn2000 - revzilla · 2014. 6. 20. · i235-411 2008 kawasaki vn2000 - pciii usb - 1...

Post on 12-Aug-2021

3 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

i235-411 www.powercommander.com 2008 Kawasaki VN2000 - PCIII USB - 1

2008 Kawasaki VN2000Installation Instructions

Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com

Parts List1 Power Commander1 USB Cable1 CD-ROM1 Installation Guide1 Power Adapter2 Power Commander Decals2 Dynojet Decals2 Velcro® Strip1 Alcohol Swab

You can also download the PowerCommander software and latest mapsfrom our web site at:

www.powercommander.com

The ignition MUST be turnedOFF before installation!

PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION

Button Adjustment Display

Faceplate Buttons

USB PortExpansion Port

1 Remove the main seat and the passen-ger seat.

2 Remove the chrome left hand enginecover below the fuel tank.

3 Remove the fuel tank. To remove thefuel line squeeze the orange tabs ofthe connector and push in (Fig. A).

4 Unplug the three electrical connectors.

6 Attach the black ground lead from thePCIII to the negative side of thebattery (Fig. C).

Fig

. A

Fig

. B

Fig

. C

i235-411 www.powercommander.com 2008 Kawasaki VN2000 - PCIII USB - 2

Unplug these connectors

Squeeze this line to remove

Ground wire

5 Lay the PCIII in the battery area androute the PCIII harness towards thefront of the bike (Fig. B). Follow the stock wiring harnessthrough the guides.

PCIII harness

7 Locate the throttle body which isunder the fuel tank. Unplug the stock wiring harness fromeach injector (Fig. D).

8 Unplug the stock Throttle PositionSensor connector (Fig. D). This is aGREY 3 pin connector.

9 Plug the PCIII harness in line of thestock wiring harness and throttle bodyconnections (Fig. E).The ORANGE colored wires from thePCIII go to the front cylinder.

10 Secure the PCIII to the battery covertowards the rear of the shock usingthe supplied velcro.Make sure to clean both surfaces withthe alcohol swab before attaching.

11 Reinstall fuel tank and cover.

Fig

. D

Fig

. E

Fig

F

i235-411 www.powercommander.com 2008 Kawasaki VN2000 - PCIII USB - 3

Unplug

top related