2. gypsum
Post on 04-Oct-2015
8 Views
Preview:
DESCRIPTION
TRANSCRIPT
-
GYPSUM
*
-
In nature : Gypsum Rock
Pure gypsum rock : CaSO4.2H2O
Impurities : MgO, Al2O3, Fe2O3, SiO2, CaCO3, MgCO3...GYPSUM
*
-
PRODUCTION STEPSExcavatingCrushing (~25 mm diameter)GrindingHeating (calcining)Cooling and PulverizingMarketing in Bags
*
-
CALCINATIONGypsum rock wahen heated to 100-190C looses of its water. CaSO4.2H2O CaSO4.H2O + 3/2 H2O Plaster of ParisThis is low burning process and named as INCOMPLETE CALCINATION.When calcination is carried out at temperatures above 190C all water is removed.CaSO4.2H2O CaSO4 + 2H2O gypsum anhydriteThis is high-burning process & COMPLETE CALCINATION.
*
-
Both of these products form gypsum rock by recombining with water.
CaSO4.H2O + 3/2H2O CaSO4.2H2OCaSO4 + 2H2O CaSO4.2H2O
Calcination process is carried out in two types of kilns.Kettle KilnsRotary Kilns
*
-
KETTLE KILN
*
-
ROTARY KILN
*
-
GYPSUM PLASTERSObtained by Incomplete Calcination (CaSO4.H2O)
Plaster of Paris : is formed by incomplete calcination at 100-190C. No admixtures are found.
Hard Wall PlasterPlaster of Paris + Admixtures (Glue, Sand...)
*
-
Obtained by Complete Calcination (CaSO4)
Flooring Plaster (CaSO4 with no impurities)
Hard Finish Plaster (CaSO4 + Al2(SO4)3) (CaSO4 + Na2B4O7)
*
-
PROPERTIES & USES OF GYPSUM PLASTERS Plaster of ParisSetting time ~5-20 min.Used for sculpturing, ornamental work, small repair work
*
-
PROPERTIES & USES OF GYPSUM PLASTERS Hard Wall PlasterSetting time ~1 hrCompressive strength ~7 MPaAdmixtures result in increased plasticity & setting time & reduced shrinkageCan be used for plastering wallsProduction of prefabricated structural unitsMasonry bricks & blocks
*
-
Flooring, Hard Finish PlasterSetting time ~1-16 hrsCompressive strength > 7 MPaCan be used for producing prefabricated units, masonry bricks & blocks & flooring & pavement bricks & tiles.PROPERTIES & USES OF GYPSUM PLASTERS
*
-
Gypsum often serves as a fire proofing material even though its strength is destroyed by long continuous heat. It forms a powder covering the surface which acts as an effective insulator.Gypsum products tend to disintegrate when exposed to moisture. Therefore, they should not be used for exterior work & for moist interiors. (NON-HYDRAULIC)PROPERTIES & USES OF GYPSUM PLASTERS
*
-
BY-PRODUCT GYPSUMPhospogypsum Major by-product of phosporic acid production
phosphate + sulfuric acid --> fertilizer + gypsum
Desulfogypsum Obtained from the desulfurization of combustion gases in coal burning power plants (Harmful SO2 gas is turned into CaSO4.2H2O
*
-
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=6&cad=rja&uact=8&ved=0CEgQFjAF&url=http%3A%2F%2Fwww2.ce.metu.edu.tr%2F~ce344%2F2.%2520gypsum.ppt&ei=leoCVZbXEYS8ugTb64Bw&usg=AFQjCNHeZ_dbrKuOS9L8qeerCxM4C8xaYA&sig2=Wb1xgy6oHkM21Q4OF9IDhg&bvm=bv.88198703,d.c2E
*
*
*
*
*
*
*
*
*
*
*
*
*
*
top related