13/04/2012 | profiled products group | public1
Post on 21-Jan-2016
237 Views
Preview:
TRANSCRIPT
13/04/2012 www.ruukki.com | Profiled Products Group | PUBLIC1
13/04/2012 www.ruukki.com | Profiled Products Group | PUBLIC2
Description, application, properties
Load-bearing sheets
13/04/20123 www.ruukki.com | Profiled Products Group | PUBLIC
Content
• Product description• Technical parameters• Additional technical information• Application in buildings• Certification• References
13/04/20124 www.ruukki.com | Profiled Products Group | PUBLIC
Product description
Load-bearing sheets
13/04/20125 www.ruukki.com | Profiled Products Group | PUBLIC
Load-bearing sheets• Strength, durability and cost efficiency in
roof constructions• Load-bearing profile sheets are the optimal
choice in different roof constructions due to their weight and load-bearing capacity
• The most economical solutions can be obtained by using Ruukki’s Poimu- dimensioning software for roof optimization
• Load-bearing profiles are suitable for roof decking, external roof sheeting and intermediate flooring
• They can also be used as formwork for concrete slabs
13/04/20126 www.ruukki.com | Profiled Products Group | PUBLIC
Load-bearing sheets – portfolio
• CEE Area
– T55-53L-976
– T60-53L-915
– T85-40L-1120
– T130-75L-930
– T153-41L-840
• Ruukki offers the following load-bearing sheet types:
• NE Area
– T45-30L-905 / T45-30L-905 arched
– T70-57L-846 / T70-57L-1058
– T130-75L-930
– T153-40L-840
13/04/20127 www.ruukki.com | Profiled Products Group | PUBLIC
Load-bearing sheets – naming practice
T130 75L 930
Trapezoidal Profile
Heightclass
Width of crown on the colour side
Load bearing sheet
Effective width
13/04/20128 www.ruukki.com | Profiled Products Group | PUBLIC
Load-bearing sheets – same product for two different application
Insulated roof application
• Narrow flange towards supporting structure
• Wide flange up for supporting insulation material
• Side-lapping screws on valley to not harm vapour barrier
• Colour facing inside a building
Water roofing application
• Wide flange towards supporting structure
• Side-lapping on top to ensure water tightness
• Side lapping screws on top to ensure water tightness
• Colour is on the top of the sheet
13/04/20129 www.ruukki.com | Profiled Products Group | PUBLIC
Load-bearing sheets• Material parameters:
– zinc-coated steel:• S320GD• S350GD
– zinc mass g/m²:• Z100• Z275
– thicknesses:• 0.60 – 1.5 mm
– standard coatings:• plain galvanized, polyester 15ym,
polyester 25ym, Pural– raw material width:
• 1250 mm• 1500 mm
– standard colours: white, dark grey
13/04/201210 www.ruukki.com | Profiled Products Group | PUBLIC
Load-bearing sheets
• Load-bearing sheets types:
T60-53L-915
T45-30L-905
T70-57L-846
T45-30L-905 arched
T70-57L-1058
T55-53L-976
13/04/201211 www.ruukki.com | Profiled Products Group | PUBLIC
Load-bearing sheets
• Load-bearing sheets types:
T85-40L-1120
T153-40L-840 T153-41L-840
T130-75L-930
13/04/201212 www.ruukki.com | Profiled Products Group | PUBLIC
Technical parameters
Load-bearingsheets
13/04/201213 www.ruukki.com | Profiled Products Group | PUBLIC
Load-bearing sheet T45-30L-905 – NE
• Parameters
– Effective width - 905 mm– Profile height - 44 mm– Minimum length - 500 mm
– Maximum length - 15000 mm
– Std.thicknesses - 0.6, 0.7 mm
– Material - S350GD+Z (S320 for 0.6)
13/04/201214 www.ruukki.com | Profiled Products Group | PUBLIC
Load-bearing sheet T55-53L-976 – CEE
• Parameters
– Effective width - 976 mm– Profile height - 53 mm– Minimum length - 500 mm– Maximum length - 13500 mm– Std. thicknesses - 0.7, 0.9 mm– Material - S320GD+Z
13/04/201215 www.ruukki.com | Profiled Products Group | PUBLIC
• Parameters
– Effective width - 915 mm– Profile height - 60 mm– Minimum length - 1500 mm– Maximum length - 11800 mm– Std. thicknesses - 0.5, 0.6, 0.7, 0.75, 0.8 mm– Material - S320GD+Z, S350GD+Z
Load-bearing sheet T60-53L-915 - CEE
13/04/201216 www.ruukki.com | Profiled Products Group | PUBLIC
• Parameters
– Effective width - 846 mm
– Profile height - 70 mm
– Minimum length - 600 mm
– Maximum length - 15000 mm
– Std. thicknesses - 0.7, 0.8, 0.9, 1.0 mm
– Material - S350GD+Z
Load-bearing sheet T70-57L-846 - NE
13/04/201217 www.ruukki.com | Profiled Products Group | PUBLIC
Load-bearing sheet T70-57L-1058 – NE
• Parameters
– Effective width - 1058 mm– Profile height - 70 mm– Minimum length - 600 mm– Maximum length - 15000 mm– Std. thicknesses - 0.7, 0.8, 0.9, 1.0 mm– Material - S350GD+Z
13/04/201218 www.ruukki.com | Profiled Products Group | PUBLIC
• Parameters
– Effective width - 1120 mm– Profile height - 83 mm– Minimum length - 500 mm– Maximum length - 13500 mm– Std. thicknesses - 0.7, 0.75, 0.8, 0.88, 1.0, 1.25 mm– Material - S320GD+Z
Load-bearing sheet T85-40L-1120 - CEE
13/04/201219 www.ruukki.com | Profiled Products Group | PUBLIC
• Parameters
– Effective width - 930 mm– Profile height - 130 mm– Minimum length - 500 mm– Maximum length - 13500 mm– Std. thicknesses - 0.7, 0.75, 0.8, 0.88, 1.0, 1.25 mm– Material - S320GD+Z
Load-bearing sheet T130-75L-930 - CEE
13/04/201220 www.ruukki.com | Profiled Products Group | PUBLIC
• Parameters
– Effective width - 930 mm
– Profile height - 130 mm
– Minimum length - 800 mm
– Maximum length - 18300 mm
– Std. thicknesses - 0.7, 0.8, 0.9, 1.0, 1.2 mm
– Material - S350GD+Z
Load-bearing sheet T130-75L-930 - NE
13/04/201221 www.ruukki.com | Profiled Products Group | PUBLIC
Load-bearing sheet T153-41L-840 – CEE
• Parameters
– Effective width - 840 mm– Profile height - 153 mm– Minimum length - 1800 mm– Maximum length - 13500 mm– Std. thicknesses - 0.7, 0.75, 0.8, 0.88, 1.0, 1.25 mm– Material - S320GD+Z
13/04/201222 www.ruukki.com | Profiled Products Group | PUBLIC
Load-bearing sheet T153-40L-840 – NE
• Parameters
– Effective width - 840 mm– Profile height - 153 mm– Minimum length - 800 mm– Maximum length - 18300 mm– Std. thicknesses - 0.7, 0.8, 0.9, 1.0, 1.2, 1.5 mm– Material - S350GD+Z
13/04/201223 www.ruukki.com | Profiled Products Group | PUBLIC
Services and Options
Load-bearing sheets
13/04/201224 www.ruukki.com | Profiled Products Group | PUBLIC
Technical information – perforation
• Web-perforated profiles– Perforation grade: 15%
(3mm, c/c 7.4 mm)– Improvement in sound
absorption– Improvement in
reverberation time– Calculation with Poimu
optimization tool
13/04/201225 www.ruukki.com | Profiled Products Group | PUBLIC
• Sheets with anti-condensation layer are protected against water condensation directly at the bottom surface of the metal sheet.
• The layer absorbs water which then may be evaporated into the surrounding environment during a change in weather conditions.
• Anti-condensation absorbs and prevents water drops from emerging
• Usually used in cold storages and halls
• Factory installed
Technical information – anti-condensation
13/04/201226 www.ruukki.com | Profiled Products Group | PUBLIC
• Ensuring the health and safety of workers is our priority. We have developed perfect tools for handling Ruukki’s load-bearing sheets on site
• The safety anchor ensures safety while working on the roof
• The tools are CE-marked and can be used only with Ruukki's load-bearing sheets.
Technical information – safety anchors
13/04/201227 www.ruukki.com | Profiled Products Group | PUBLIC
Technical information – lifting tool
• Ensuring the health and safety of workers is our priority. We have developed perfect tools for handling Ruukki’s load-bearing sheets on site
• The lifting tool is used for lifting load-bearing sheets safely
• The tools are CE-marked and can be used only with Ruukki's load-bearing sheets.
13/04/201228 www.ruukki.com | Profiled Products Group | PUBLIC
Calculation and optimization – Poimu• With Ruukki’s Poimu software you can calculate and optimise load-bearing sheets needed for the project.
• With the software you can choose the best load-bearing sheet type, thickness and static scheme quickly and efficiently.
• Poimu optimisation tool covers single, double, multi-span and continuous structures
• Apart from internal use, the software is made available for external use. Customers can download it from a Ruukki’s software platform
• Please visit www.ruukki.com for further information
Calculation and optimization – Poimu
13/04/201229 www.ruukki.com | Profiled Products Group | PUBLIC
Application in buildings
Load-bearing sheets
13/04/201230 www.ruukki.com | Profiled Products Group | PUBLIC
Application in buildings
• Ruukki’s load-bearing sheets can be used for insulated and non-insulated roofs for example in the following buildings:
– production halls– warehouses– shopping centers– office buildings– sports buildings– renovation projects
13/04/201231 www.ruukki.com | Profiled Products Group | PUBLIC
• An example of a project where insulation comes over the load bearing sheet
Application in buildings
13/04/201232 www.ruukki.com | Profiled Products Group | PUBLIC
Certification
Load-bearing sheets
13/04/201233 www.ruukki.com | Profiled Products Group | PUBLIC
Certification
===
Ruukki’s load-bearing sheets
=
CE Marking
• CE Marking in accordance with EN 1090
• EC Declaration of Conformity
• Factory production control in accordance with EN 14782
and EN 1090
13/04/201234 www.ruukki.com | Profiled Products Group | PUBLIC
References
Load-bearing sheets
13/04/201235 www.ruukki.com | Profiled Products Group | PUBLIC
Project description:
Blue 1 airport terminal in Vantaa, FinlandRuukki’s delivery
• steel frame with installation, load-bearing roofing sheets and external wall elements including installation.
13/04/201236 www.ruukki.com | Profiled Products Group | PUBLIC
Project description:
Warehouse in SwedenRuukki’s delivery
• Load-bearing sheets, 40000 m²
• Project finished in 2008
13/04/201237 www.ruukki.com | Profiled Products Group | PUBLIC
Project description:
WarehouseRuukki’s delivery
• Load-bering sheets
• Project finished in 2006.
13/04/201238 www.ruukki.com | Profiled Products Group | PUBLIC
13/04/2012 www.ruukki.com | Profiled Products Group | PUBLIC39
Energy-efficient building
Primula, JärvenpääCustomer’s target
• Pienentää kuhunkin tuotettuun tuotteeseen sitoutunutta hiilijalanjälkeä sekä Herkkupajan LEED-sertifiointi ja toimitilojen rakentaminen WWF:n Green Office –periaatteen mukaisesti
Ruukki’s solution
• Pienentää kuhunkin tuotettuun tuotteeseen sitoutunutta hiilijalanjälkeä sekä Herkkupajan LEED-sertifiointi ja toimitilojen rakentaminen WWF:n Green Office –periaatteen mukaisesti
Project description:• Shopping centre
• Load-bearing sheets
• 2004
13/04/201240 www.ruukki.com | Profiled Products Group | PUBLIC
Project description:• Warehouse
• Load bearing sheets
• 2004
13/04/201241 www.ruukki.com | Profiled Products Group | PUBLIC
Thank you!
13/04/201242 www.ruukki.com | Profiled Products Group | PUBLIC
top related