1(: 7+,6 6($621 - universal electric motors · 2015. 4. 20. · unit bearing motors unit bearings...
Post on 28-Apr-2021
6 Views
Preview:
TRANSCRIPT
MOTOR CATALOGUENEW THIS SEASON
www.uem.ca
WE DO MOTORS BEST.
UNIVERSAL ELECTRIC MOTORS
01 Universal Electric Motors
Refrigeration ECM
Stock # Watts Amps.Volts RPM Range ShaftBearingsEncl. Rotation
EC5411 IP66 0.20 - 0.75115 1550 - 1775 HublessBall CWOSE
Features:
4 - 25
EC5411
Ultimate Truck Stock Motor ™
Dual Side Bosses
Std 3-hole styleHussmann 4-hole
• Suitable for Evaporator & Condenser Applications• IP66 Water Tight with all angle Moisture Protection• High Efficiency (up to 65%)• Includes Plug, Speed Nut, Rubber Isolator• Universal Mounting• UL/CUL Approved• Aluminum Frame• Thermally Protected• Robust Ball Bearing System• Replaces: Hussmann, Copeland, Tecumseh, Hill, Tyler, Kysor, Crystal Tips & More..
=+
Kit Sold Seperately
EC5411EC5412
Replaces 51 FrameKit 58
All Models
EC5411 04-R6711, 04-R681104-R9211, 04-R5444
5R016, 5R024,5R025, 5R020, 5R021
9207F2, 9208F29211, 9212, 9213
Cross Reference
Not Available Not Available Not Available
Rotom
Formerly Emerson Motors
Morrill Century
EC5412
EC5412
4 - 25 0.20 - 0.75115 1550 - 1775 HublessBallIP66 CCWOSE
Converts 2-pin Straight to 2-pin 90 Degree
Part No. 2117
ECM Unit Bearing MotorsEnergy Efficient Electronically Commutated Brushless DC Motors
4 to 25 Watts!
Refrigeration ECM
9208F2 T.E. 0.47 - 0.58115 1550 CWOSEHubless
Stock # Watts Amps.Volts RPM RotationShaftEncl. Replaces
R68119207F2 T.E. 0.20 - 0.30115 1550 CWOSEHubless R6711
• Cast Iron Construction• Dual Side Bosses• 2-pin Lyall Plug Included• Up to 65% Efficiency• Standard 3 Hole & 4 Hole (Hussmann Style Mount)• Replaces 6, 9, 12, 14, 15 & 16 Watt P.S.C. & Low Efficiency Shaded Pole Motors
Features:
ECM Unit Bearing MotorsEnergy Efficient Electronically Commutated Brushless DC Motors
14 - 15 - 166 - 9 - 12
Formerly A.O. Smith Electrical Products Company
02Universal Electric Motors
All Models
Refrigeration ECM
Stock # Watts Amps.Volts RPM RotationShaftEncl. Replaces
ECR161 ● 16 Max. 0.34115 1800 CWOSEHublessT.E.A.O.
ECR161
Many OEM
• Up to 70% Efficiency• Mounting Shroud & Fan Guard Mounting With Four Extended M4 Threaded Thru-Bolts on Motor Shaft Side• Reduce Inventories, One Motor Covers 4W Through 16W Applications• Energy & Cost Saving, Payback In Less Than One Year• CO² Reduction, Eco-Friendly Technology• Drop In Replacement For Traditional Shaded Pole Unit Bearing Motors• ECR Motors Are Ideal For Retrofit & New Installations• Clockwise Opposite Shaft End Rotation, 19” Sleeved Leads With 2 Pin Plug• Rear Mounting With Three Standard 8-32 UNC Threaded Holes• Foot Mounting With 4 Threaded 8-32 UNC Holes• Universal Hubless Shaft Accommodates Standard Axial Fan Blades• Moisture & Humidity Resistant• Input Voltage Range For ECR161 Motor Is 90V…140V• Operating Temperature Range of -10°C to +40°C (14°F to 104°F)• Automatic Thermal Overload/Electronic Protection• Fully Enclosed, Long Life Ball Bearings
Features:
®
6 to 16 Watts!
4 to 16 Watts!
03 Universal Electric Motors
SS671 ● O.F.C. 2.10/1.10115/208-230 1550 CCWSE5/16” x 2.00” GE-1231
672B ● O.F.C. 2.10/1.10115/208-230 1550 CCWOSE5/16” x 2.00” GE-1441
SS672 ● O.F.C. 2.10/1.10115/208-230 1550 CWSE5/16” x 2.00” GE-1441
671B ● O.F.C. 2.10/1.10115/208-230 1550 CWOSE5/16” x 2.00” GE-1231
981 O.F.C. 0.60460 1550 CCWSE5/16” x 2-1/2” 810F050B
G.E. 11 Frame ReplacementsStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
9336 ● O.F.C. 1.10230 1550 CWOSE5/16” x 2-5/8” GE-1336O.F.C. 208-230 1.10 5/16” x 2.00” CCWSESS1332 ● 1550
9664 O.F.C. 1.00208-230 1550 CWOSE5/16” x 2.00” GE-13329663 O.F.C. 1.00208-230 1550 CWOSE5/16” x 1-1/4” GE-10169662 O.F.C. 1.00208-230 1550 CCWOSE5/16” x 2.00” GE-13429661 O.F.C. 2.00115 1550 CCWOSE5/16” x 2.00” GE-13419660 O.F.C. 2.00115 1550 CWOSE5/16” x 2.00” GE-1331
• Open Fan Cooled• Shaded Pole Design• Sleeve and Ball Bearings
Features:
G.E. 11 Frame Replacements
1/15
1/15
1/15
1/15
1/15
1/201/20
1/201/201/201/201/20
SS1332 981671B - 672B
9336All Other Models SS671 - SS672
9665 O.F.C. 208-230 1.00 5/16” x 1-1/4”
GE-1332
GE-1232CWOSE15501/15
Formerly A.O. Smith Electrical Products Company
®
(●) Ball Bearing
Pedestal Fan Air Circulator Motors
48 Frame - Two Speed
SS647 ●* 1/3 4.40115 1100 / 2 REV.1/2” x 3.00”T.E.A.O.
Stock # HP Amps.Volts RPM RotationShaftEncl. Replaces
General ReplacementSS486 ●* 1/4 3.40115 1100 / 2 REV.1/2” x 3.00”T.E.A.O. General Replacement
Features:
• Yoke Mount - Extended Through Bolts• Totally Enclosed, Air Over• Thermally Protected• Pull Chain• 10’ Cord & Plug• 40°C Ambient• Sealed Ball Bearings
®
All Models
Unit Bearing Motors
Unit Bearings
Unit Bearings
SS5311 6 0.40115 1550 CWLEHublessT.E.
Stock # Watts Amps.Volts RPM RotationShaftEncl. Replaces
Stock # Watts Amps.Volts RPM RotationShaftEncl. Replaces
EE5311
SS5811 16 1.00115 1550 CWLEHublessT.E. EE5811
SS5411 9 0.55115 1550 CWLEHublessT.E. EE5411SS5611 9 0.55115 1550 CWLEHublessT.E. EE5611
SS5211 4 0.29115 1550 CWLEHublessT.E. EE5211
276 50 0.85230 1500 CCWLE5/16” x 2-1/2”O.S.E. R5122260 50 0.85230 1500 CWLE3/8” x 1-1/2”O.O.S.E. R5012258 50 1.70115 1500 CWLE3/8” x 1-1/2”O.O.S.E. R5011
252 25 0.60230 1500 CWLEHublessO.O.S.E. R2512250 25 1.10115 1500 CWLEHublessO.O.S.E. R2511
256 35 0.70230 1500 CWLEHublessO.O.S.E. R3512254 35 1.40115 1500 CWLEHublessO.O.S.E. R3511
Features:
All Models
• Shaded Pole Design• Cast Iron Construction• Totally Enclosed
Features:
• Shaded Pole Design• Cast Iron Construction• Open Enclosure
250 - 252 - 254 - 256 258 - 260 276
Formerly A.O. Smith Electrical Products Company
®
04Universal Electric Motors
Evaporator Fan Motors
3.3” Diameter
SS103 1/45 0.90115 1550 CWSEHublessT.E.
Stock # HP Amps.Volts RPM RotationShaftEncl. Replaces
R103
SS359 1/20 1.10230 1550 CWSE5/16” x 3.20”OPEN R359
SS313 ● 1/15 2.20115 1550 CWSE5/16” x 3.00”OPEN R313SS358 1/20 2.00115 1550 CWSE5/16” x 3.20”OPEN R358
(●) Ball Bearing (*) P.S.C. Design
SS101 1/45 0.90115 1550 CCWSEHublessT.E. R101
SS575 1/20 0.89208-230 1550 CCWSE5/16” x 2.50”OPEN R90575SS574 1/20 1.90120 1550 CCWSE5/16” x 2.50”OPEN R90574SS371 ●* 1/20 0.30230 1550 CCWSE5/16” x 2.80”OPEN R371
SS368 1/20 1.80115 1550 CCWSE5/16” x 2.80”OPEN R368SS360 1/30 1.20115 1550 CCWSE1/4” x 1.75”OPEN R360
SS370 ●* 1/20 0.80115 1550 CCWSE5/16” x 2.80”OPEN R370SS369 1/20 0.95230 1550 CCWSE5/16” x 2.75”OPEN R369
Features: SS101 - SS103 SS358 - SS359SS313 - SS360 - SS368 SS369
SS9721 ●* 1/12 1.10 / 0.60115/208-230 1550 REV.5/16” x 3.15”OPEN R90721
®
SS574 - SS575SS370 - SS371 SS9721
• Open & Totally Enclosed Construction• Shaded Pole & P.S.C. Design• Sleeve and Ball Bearings
Stock # Stack Amps.Volts RPM RotationShaft
SS617SS635
Replaces
SS3670
Skeleton Motors & Kits
3/8 0.22 1900 3/16” x 1-1/4”208-2401-1/2 1.20/0.83 1550 1/4” x 1-1/2”208-2405/8 0.40/0.26 3000 3/16” x 1-9/16”120/240
CWSECCWSECWSE
R635R617
R3670R3100, C01550EM550, VFM100SM550, C65878
‘C’ Frame Skeleton
• Impedance or Thermally Protected• Continuous Duty, Air Over• Mechanically Reversible• Class ‘B’ Insulation
Features:
SS3100 5/8 0.59 3000 CCWSE7/32” x 1-11/16”115
SS3100SS3670SS617 SS635
®
05 Universal Electric Motors
06Universal Electric Motors
Stock # HP Amps.Volts RPM RotationShaftEncl.
OPEN 0.85115 1550 REV.5/16” x 3.00”
Features:
Evaporator Motors
1/20
Ultimate Truck Stock Motor ™
Cross ReferenceRotom
Formerly Emerson Motors
Bohn Century Fasco
1/15 0.48208-230 1550 REV.5/16” x 3.00”OPEN
• High Efficiency P.S.C. Design• Uses Over 40% Less Electricity than Shaded Pole Designs• Four 8-32 x 3/4” Stud Extensions at each end• Automatic Reset Thermal Overload Protector• Capacitor Included• Reversing Leads• Ball Bearings have all Angle Thrust System• 15” Cord & Plug (0.250” pin pitch) Includes Adapter for 0.375” pin pitch
EM-9662 ●*
EM-9662
EM-9656
EM-9662
EM-9656
R90721, R358, R1052, R368R90572, R90574
5001L, 5008S, 5004L5034L, 5034LS, 5008SS
574A, 574 D1124, D1101
Blanchard-Ness Larkin Packard Ref Plus
R90721, R359, R1053, R369R90573, R90575, R91125
7190-0442, 253091015008T, 5034M, 5034MS5008TS
573A, 575 D1126, D1125, D1103D1122, D1123
E1052 253-1194, 253091017163-2113, JA2N015N
41101, 41154, 45036 41124, 45008S, 49101
RMT0011
E1053 253-1195, 253091017163-3371, 7163-2135JA2N016N
41103, 41195, 4112645008T, 41125, 49101
RMT0012
EM-9656 ●*
All Models
“A” Dim.
3.26”3.78”
0.250” 0.375”
Adapter Plug (Patent Pending)
3.3” Diameter
(●) Ball Bearing (*) P.S.C. Design
07 Universal Electric Motors
Features:
42 Frame
Stock # HP Amps.Volts RPM RotationShaftEncl. Replaces
• 4 Bolts on Shaft End on 2.86” B.C.D.• Lyall Plug Included• Up to 65% Efficiency• Replaces Heatcraft, Bohn, Larkin, Chandler & Climate Control ECM Evaporator Motors
Features:
ECM Evaporator Fan Motors
9215L T.E. 1.20115 1625 CWSE5/16” x 2.90” 22617801, 22618001 25307801, 25308001
9215H T.E. 0.70230 1625 CWSE5/16” x 2.90” 22617701, 2261790125307701, 25307901
1/15, 1/20, 1/25
1/15, 1/20, 1/25
All Models
Formerly A.O. Smith Electrical Products Company
3.3” Diameter
Stock # Watts Amps.Volts RPM RotationShaftEncl. Replaces
ECR501
All Models
• Up to 70% Efficiency• Energy & Cost Saving, Payback In Less Than One Year• CO² Reduction, Eco-Friendly Technology• Drop In Replacement For Traditional Shaded Pole & P.S.C. Evaporator Fan Motors• Flexible Mounting With Four Extended 8-32 UNC Threaded Thru-Bolts on 2.84” B.C.D. at Both Ends• Clockwise Shaft End Rotation, 19” Sleeved Leads With 2 Pin Plug• Standard 5/16” Shaft Diameter, 2-1/2” Length With 1-3/4” Flat• Moisture & Humidity Resistant, IP42 Enclosure Rating• Operating Temperature Range of -30°C to +40°C (-22°F to 104°F)• Input Voltage Range For ECR501 Motor is 100V…127V ECR502 Motor is 190V…254V• Fully Enclosed, Long Life Ball Bearings• Automatic Thermal Overload/Electronic Protection
ECM Evaporator Fan MotorsEnergy Efficient Electronically Commutated Brushless DC Motors
50 1.13115 1550 CWSE5/16” x 2-1/2”T.E.A.O.ECR502 50 0.67208-230 1550 CWSE5/16” x 2-1/2”T.E.A.O.
Many OEMMany OEM
®
08Universal Electric Motors(*) P.S.C. Design
Condo & Apartment Fan Motors
SS630 --- 0.75120 3000 CCWSE7/32” x 1-13/16”OPENSS260 1/90 0.60115 1500 CCWSE5/16” x 1.09”T.E.
Stock # HP Amps.Volts RPM RotationShaftEncl. Replaces
R630R260
SS264 1/75 0.70120 1550 CCWSE5/16” x 2.06”T.E. R264SS262 1/40 1.10115 1550 CCWSE5/16” x 1-1/2”T.E. R262
799 1/8 2.60115 1000 CWSE1/2” x 5.00”OPEN DA3E200,DA3F100, DA3G142
OEM Replacements
SS266 1/20 1.45120 1550 CCWSE5/16” x 1.40”T.E.SS2603 1/35 1.15115 1550 CCWSE1/2” x 2.10”OPEN
R266R2603
SS2605 1/12 3.00115 1050 CCWSE1/2” x 1.98”OPEN R2605SS2604 1/10 2.65120 1550 CCWSE1/2” x 2.05”OPEN R2604
SS2609 1/30 1.21115 1550 CCWSE1/2” x 2.35”T.E.SS2612 1/30 1.21115 1550 CWSE1/2” x 2.35”T.E.
R2609R2612
SS2609 - SS2612SS2603 - SS2604
SS266
SS2605
SS630 SS260 - SS262- SS264
• Shaded Pole Design• Sleeve Bearings• Replacements for Reversomatic & Intercity
Features:
®
SS799 * 1/8 2.10115 1000/5 CWSE1/2” x 5.00”OPENSS2799 * 1/6 2.60115 950/5 CWSE1/2” x 4.40”OPEN
DD-029DD-030
42 & 48 Frame
Fan Coil Motors
• P.S.C. Design• Capacitor Included• Sleeve Bearings• Replacements for Temspec, Unilux, Climetec & Snyder-General
Features:
®
SS799 - SS2799 799
Stock # HP Amps.Volts RPM RotationShaftEncl. Replaces
Formerly A.O. Smith Electrical Products Company
(●) Ball Bearing09 Universal Electric Motors
Features:
ECM Fan Coil Motors
Stock # HP Amps.Volts RPM RotationShaftEncl.
CS89 ● 1/10 1.56115 1100/3 CWLE9.30” x 1/2” x 9.30”OPEN
42 Frame ECM CS89
Formerly A.O. Smith Electrical Products Company
ECM Fan Coil Replacement
• Energy Efficient ECM Technology• ECM with Internal Control• Up to 65% Efficiency vs. Low Efficiency Shaded Pole• Rotors are Isolated from Shaft to Reduce Motor Vibration• Saves an Average of 69% on Energy Usage• Double Shaft• Open Construction• Resilient Base• 54” Leads• Runs Cooler• Easy to Install• Long Life Ball Bearings
Replaces many Shaded Pole & P.S.C. Motors In Fan Coil, PTACS & Air Conditioners
10Universal Electric Motors(●) Ball Bearing (*) P.S.C. Design
Features:
Elco Replacement Motors
• Shaded Pole & P.S.C. Design• Open & Totally Enclosed• 60 Hz• Sleeve Bearings• Thermally Protected
® Stock # HP Amps.Volts RPM RotationShaftWatts
SS6W115 --- 0.41115 1550 CCWSEHubless6
SS16W115 --- 0.89115 1550 CCWSEHubless16SS9W115 --- 0.58115 1550 CCWSEHubless9
SS16W230 --- 0.50230 1550 CCWSEHubless16SS34W115 --- 1.60115 1550 CCWSEHubless34SS34W230 --- 0.80230 1550 CCWSEHubless34RMT0004 ● --- 1.60115 1550 CCWSEHubless34RMT0005 ● --- 0.80230 1550 CCWSEHubless34SS1586 ●* 1/20 1.07115 1550/2 CWSE1/2” x 3-29/32”41SS1616 ●* 1/8 2.16115 1550/2 CWSE1/2” x 3-3/4”---SS1617 ●* 1/4 - 1/8 2.52 / 1.22115 1090 CWSE1/2” x 3-1/2”---SS1893 ●* 1/15 0.82115 1550/6 CWSE7-3/4” x 1/2” x 7-3/4”50SS1895 ●* 1/4 3.60115 1550/6 CWSE8-7/16” x 1/2” x 8-7/16”420SS7004 ●* 1/15 0.93115 1550/2 CCWSE5/16” x 1-7/16”40
RMT0004 - RMT0005
SS7004SS1586 - SS1616 - SS1617
SS6W115 - SS9W115 SS16W115 - SS16W230SS34W115 - SS34W230
SS1893 - SS1895
Stock # HP Amps.Volts RPM RotationShaftEncl.
89 1/10 3.20115 1050/5 DBL10-11/16” x 1/2” x 10-11/16”OPEN
93V1 1/10 3.20115 1050/5 DBL10” x 3/8” x 10”OPENUE89P * 1/10 2.50115 1050/5 DBL10-1/2” x 1/2” x 10-1/2”OPEN
320 1/15 1.30208-230 1050/3 DBL8-7/8” x 1/2” x 8-7/8”OPEN362 * 1/10 1.70115 1075/4 DBL10-11/16” x 1/2” x 10-11/16”OPEN381 * 1/10 0.81208-230 1075/3 DBL10-11/16” x 1/2” x 10-11/16”OPEN
42 Frame
953 * 1/15 0.80115 1100/3 DBL10-1/2” x 1/2” x 10-1/2”OPEN945A * 1/8 1.20115 1500/3 DBL9” x 1/2” x 7-1/2”OPEN955 * 1/6 2.00115 1500/3 DBL10-1/2” x 1/2” x 10-1/2”OPENUE955 * 1/6 2.30115 1500/3 DBL10-1/2” x 1/2” x 10-1/2”OPEN954 * 1/30 0.60115 1100/3 CCWSE1/2” x 8-1/2”OPEN9608 * 1/20 0.60115 1100/3 REV.1/2” x 9-1/2”OPEN
Formerly A.O. Smith Electrical Products Company
®
Fan Coil Motors
11 Universal Electric Motors
Penn Ventilator (Zephyr)
Stock # HP Amps.Volts RPM RotationShaft ReplacesDiameter
56342 1/70 115 1.00 / 0.50 1550/2 CWSE3/8” x 5-1/2”56343 0.27 115 1.32 1550/2 CWSE3/8” x 5-3/4”56344 ●* 0.08 115 1.60 / 1.00 1550/2 CWSE3/8” x 4.75”
56346 ●* 0.27 115 3.20 / 1.90 1550/2 CWSE3/8” x 5.50”
56342-056343-0, JA2M41456344-0, JE2H047
56346-0, JE2K0071/12 115 1.60 1050 CCWLE6.10” x 3/8” x 6.10” 56347-056347 ~*
3.3”3.3”3.3”
3.3”3.3”
60024 1/30 115 1.40 1550 CWSE5/16” x 1-1/2”60030 1/80 115 0.74 1400 CWSE1/4” x 1-3/4”
60024-060030-0
1/6 115 3.40 1300/2 CWSE1/2” x 2.65” 60076-060076 ●*
3.3”3.3”5.5”
56348 ~ 1/10 115 3.90 1050 CCWLE6-1/4” x 1/2” x 6-1/4” 56348-05.0”
56345 * 1/25 115 1.00 1050 CWSE3/8” x 4.75” 56345-03.3”
63745 * 1/30 115 0.50 / 0.40 1550/2 CWSE3/8” x 3.69” 63745-063746 ●* 1/12 115 1.50 / 0.90 1550/2 CWSE3/8” x 3.40” 63746-0, JE2H05763747 * 1/7 115 2.50 1550/3 CWSE1/2” x 2.20”63748 * 1/6 115 1.80 1550/3 CWSE1/2” x 2.60”
63821 ● * 1/4 115 2.70 1550 CCWSE1/2” x 2.60”
63748-0
63821-0
63747-0
3.3”3.3”4.4”4.4”
5.0”
63749 ●* 1/4 115 2.80 1725 CWSE1/2” x 3.00” 63749-063750 ●* 1/3 115 4.00 1550/3 CWSE1/2” x 5.55”63751 ●* 1/2 120 5.00 1650/2 CWSE1/2” x 5.50”63752 ●* 3/4 115 8.60 / 9.60 1625 CWSE1/2” x 5.33”
63751-063752-0
63750-05.5”5.5”5.5”5.5”
63699 ●* 1/4 115 3.40 1725 CWSE1/2” x 4.77” 63699-05.5”
63747 - 63748
6382163749 63750
60076 - 63699
63751 - 63752
56342 - 56343 56344
63745 - 63746
56345
56348
56347
60024 - 60030
• Shaded Pole & P.S.C. Design • Capacitor Included• Open Air-Over Design• Wiring Harness w/Plug Supplied• Long Life Self Aligning Sleeve & Sealed Ball Bearings
Features:
OEM Replacements®
56346
(●) Ball Bearing (*) P.S.C. Design (~) Double Shaft
12Universal Electric Motors(●) Ball Bearing (*) P.S.C. Design
Stock # HP Amps.Volts RPM RotationShaftEncl.
SS462 * 1/12 1.20120 1625/3 CWLE3.50” x 3/8” x 3.56”OPEN
SS2224 1/114 0.75115 1500/2 CWSE3/8” x 2-3/4”OPEN
OEM Replacements
SS2497 1/10 3.40115 1100 CWSE1/2” x 1-5/8”OPEN
SS3234 1/16 2.20115 1550/2 CWSE3/8” x 2-1/2”OPENSS4200 1/23 1.50115 1500 CWSE3/8” x 2-3/4”OPENSS5200 * 1/16 1.50115 1500 CWSE3/8” x 2-1/4”OPENSS6264 1/11 4.60115 1500/2 CWSE1/2” x 6-1/4”OPENSS7274 * 1/4 3.90115 1625/2 CWSE1/2” x 6-1/4”OPENSS8318 * 1/8 2.60115 1550/3 CCWSE1/2” x 2-3/4”OPENSS9316 --- 3.40115 1100 CWSE1/2” x 3-7/8”OPENSS9317 --- 4.30115 1100 CWSE
Replaces
Venmar/ VanEE
Loren CookLomanco
Loren CookLoren CookLoren CookLoren CookLoren CookGreenheckBroanBroan1/2” x 3-7/8”OPEN
SS2497
30080058 1/100 0.61115 1050 CCWSE5/16” x 1-7/8”OPEN30080135 * 1/10 1.80120 1050 CWSE1/2” x 2-3/8”OPEN
BroanBroan
HRV, Venter & Exhaust Fan Motors
SS348 * 1/15 1.30115 1550/2 CWSE Venmar/ VanEE 3/8” x 3.00”OPENSS438 * 1/14 1.46115 1625/2 CCWSE Venmar/ VanEE 5/16” x 1.88”OPEN
SS2655 ●* 1/12 1.34120 1550 CCWLE Nutech3/8” x 2.82”OPEN
950-1020 950-1021
SS8318 30080058SS9316 - SS9317 30080135SS5200 SS6264 - SS7274
SS2655SS2224 - SS3234 - SS4200
11811 1202712026 SS462
950-1020 1/25 1.37115 3000 CCWSE5/16” x 2-1/4”OPEN Tjernlund950-1021 * 1/7 1.50115 3300 CCWSE3/8” x 2.25”OPEN Tjernlund950-1022 ●* 1/5 2.80115 1700 CCWSE1/2" x 3.40”OPEN Tjernlund
11811 * 1/6 2.10120 1630/2 CCWSE3/8” x 1.90”OPEN
12027 * 1/12 1.20120 1625/3 CWLE3.50” x 3/8” x 3.56”OPEN
Venmar/ VanEE12026 •* 1/8 1.89120 1630/3 CWLE2.93” x 3/8” x 2.93”OPEN Venmar/ VanEE
Venmar/ VanEE
SS438SS348
950-1022
®
(●) Ball Bearing13 Universal Electric Motors
Stock # Amps. RPM CommentsVolts
UB1 1.20 3000 6’ Cord & Plug115UB3 0.80 3000 6’ Cord & Plug120UB160 1.10 1550 Leads - No Conduit Box115UB265 1.40 1630 Conduit Box115UB465 2.60 1550/2 2 Speed, Conduit Box, Heat Sink115
Replaces
RB1RB3RB160RB265RB465
General Purpose & Greenhouse Blowers
• All Angle Mount• Continuous Duty, Air Over• Class ‘B’ Insulation• Shaded Pole• Thermally Protected• Single & Two Speed Models• Sleeve Bearings
Features:
UB1
UFB500 1.10 2860 Conduit Box
Amps. Hz.
Inline Centrifugal Fans
• Installs in any Position• High Pressure & Volume• 8 Foot Cord & w/Plug Supplied• Mounting Bracket Included• Backwards Inclined Fan Blades• Steel Housing, Baked Powder Coat Finish• Permanently Sealed Ball Bearings• Three Year Warranty
Features:
Stock #
VENT-100 ● 4 INCH 175 98 120 0.97 60VENT-150 ● 6 INCH 435 130 120 0.97 60VENT-200 ● 8 INCH 745 210 120 1.76 60VENT-250 ● 10 INCH 785 230 120 2.00 60VENT-315 ● 12 INCH 1075 295 120 2.50 60
Duct Diameter CFM Watts Volts Amps. Hz.
All Models
120 RFB500
0.901.001.901.902.60
dBA
3.3” Diameter
UB160
UFB500UB265
UB3
UB465
®
®
CFM
200100160265465140
14Universal Electric Motors
Stock # HP Range Amps.Volts RPM RotationShaftEncl.
1/2 - 1/3
6.40 / 6.60
115 600/1200 600/1200 600/1200 600/1200 600/1200 600/1200
REV.1/2” x 5.50”OPEN3/4
6.30 / 6.10
115 REV.1/2” x 5.50”OPEN1
4.60 / 4.30115 REV.1/2” x 5.50”OPEN
1/2 - 1/33/4
10.60208 - 230208 - 230208 - 230
REV.REV.REV.
1/2” x 5.50”1/2” x 5.50”1/2” x 5.50”
OPEN
Features:
ECM Direct Drive Blower Motors
RESCUE Select
Formerly Emerson Motors
• The ECM Aftermarket Motor that Replaces OEM Constant Torque Blower Motors• Electronically Controlled Brushless Permanent Magnet Motor• Saves 25% of the Watts in A/C or Heating• 75% Watt Reduction in Circulation Mode• A Variety of Mounting Kits are Available• Electronically Protected Motor• Continous Duty, Air Over• 6000V Surge Protection• No Capacitor Required• Voltage 230V or 115V• Up to 82% Efficiency• Reversible Rotation• Class ‘B’ Insulation• 2 Year Warranty • 40°C Ambient• Ball Bearings
48 Frame
Replaces Over 900 OEM X13®† and SelecTech®† ECM Motors
Now Customized for You and Shipped Same Day from Stock !
®
11.75”12.25”12.75”11.75”11.25”12.75”
“C” Dim.
OPENOPEN
EM-6630RS
EM-6650RSEM-6640RS
EM-6631RSEM-6641RSEM-6651RS 1
9.306.40
† All marks shown within this document are properties of their respective owners.
(*) P.S.C. Design 15 Universal Electric Motors
Direct Drive Fan & Blower Motors
• P.S.C. Design• Energy Efficient• Resilient Rings• 40°C Ambient• Reversible Rotation• Open Construction• Class ‘B’ Insulation• Extended Thru Bolts• Rheem Mounting Holes in Shell• Sleeve and Ball Bearings
Features:
SS3463 * 1/2 7.00115 1075/4 1/2” x 5.00”OPENSS3464 * 1/2 3.90208-230 1075/4 1/2” x 5.00”OPEN
Stock # HP Amps.Volts RPM CapacitorShaftEncl.
10/370, 7.5/3705/370
SS3467 * 3/4 3.90208-230 1075/4 1/2” x 5.00”OPEN 5/370SS3466 * 3/4 9.10115 1075/4 1/2” x 5.00”OPEN 5/370
48 Frame - Four SpeedAll Models
FDL6001A 5460 3463 X077 D2835FD6000A 5461 3464 X073 D833
5470 3466 X074 D2832
Cross Reference
FD6001A 5471 3467 X075 D2833
EmersonCentury Genteq Marathon Fasco
R43600R43601R43602R43603
Rotom
FDL6002A
MULTI-HP RATED MOTORS
®
16Universal Electric Motors(●) Ball Bearing
Direct Drive Blower Motors
Features:
Stock # HP Amps.Volts RPM RotationShaftEncl.
EM-1390 1/4 2.80115 1075/3 REV.1/2” x 4.00”OPENEM-1391 1/4 1.50208-230 1075/3 REV.1/2” x 4.00”OPEN
SS3583 1/4 4.20115 1075/3 REV.1/2” x 4-1/2”OPENSS3584 1/4 2.00208-230 1075/3 REV.1/2” x 4-1/2”OPEN
Replaces
Stock # HP Amps.Volts RPM RotationShaftEncl. Replaces
D150D151
DD-3583DD-3584
42 Frame - Three Speed
SS3585 1/3 5.50115 1075/3 REV.1/2” x 4-1/2”OPENSS3586 1/3 2.80208-230 1075/3 REV.1/2” x 4-1/2”OPEN SS3587 1/2 7.50115 1075/3 REV.1/2” x 4-1/2”OPENSS3588 1/2 3.60208-230 1075/3 REV.1/2” x 4-1/2”OPEN
DD-3585DD-3586DD-3587DD-3588
SS3589 3/4 10.20115 1075/3 REV.1/2” x 4-1/2”OPENSS3590 3/4 5.50208-230 1075/3 REV.1/2” x 4-1/2”OPENEM-8906 ● 1 12.30115 1075/3 REV.1/2” x 6-7/16”OPENEM-8907 ● 1 5.10208-230 1075/3 REV.1/2” x 6-7/16”OPEN
DD-3589DD-3590R42812R42023
SS1314 1/3 6.00115 1075/4 CCWLE1/2” x 5-1/8”OPEN DD-1314 F1314D
EM-8906 - EM-8907
48 Frame - Three Speed
All OmniDrive Models
• Fits 9” & 10” Bolt Circle Diameter• Reversing Plug• Thermally Protected• 40°C Ambient Rating• Long Life Self-Aligning Sleeve Bearings
Features:
Stock # HP Amps.Volts RPM RotationShaftEncl.
SS752 1/4 3.60115 1075/4 REV.1/2” x 6.00”OPENSS753 1/3 4.80115 1075/4 REV.1/2” x 6.00”OPENSS754 1/2 8.20115 1075/4 REV.1/2” x 6.00”OPEN
Replaces
DD-034DD-035DD-036
48 Frame - Four Speed All Models
SS973 1/3 2.30208-230 1075/4 REV.1/2” x 6.00”OPEN DD-045SS974 1/2 3.80208-230 1075/4 REV.1/2” x 6.00”OPEN DD-046
• Resilient Rings Included• Reversing Plug• Extended Thru Bolts• Thermally Protected• 40°C Ambient Rating• Long Life Self-Aligning Sleeve Bearings
®
®
Formerly Emerson Motors
Formerly Emerson Motors
EM-1390 - EM-1391
(●) Ball Bearing (*) P.S.C. Design 17 Universal Electric Motors
Features:
Direct Drive Blower Motors
Ultimate Truck Stock Motor ™
• High Efficiency P.S.C. Design• Extended Mounting Studs• Designed for Use With 370V Capacitors• Class ‘B’ Insulation• 36” Leads• Includes Side Shell Holes For Rheem Units• Continous Duty, Air Over• Reversible Rotation• Automatic Reset Thermal Overload Protector• 2.5” Diameter Hub Rings Included• Sleeve and Ball Bearings
All Models
Formerly Emerson Motors
EM-5469 * 1/3 2.40208-230 825/4 REV.1/2” x 2.20”EM-5460 * 1/2 7.30115 1075/4 REV.1/2” x 5.00”EM-5461 * 1/2 3.60208-230 1075/4 REV.1/2” x 5.00”EM-5470 ●* 3/4 8.10115 1075/4 REV.1/2” x 5.00”EM-5471 ●* 3/4
OPENOPENOPENOPENOPEN 4.10208-230 1075/4 REV.1/2” x 5.00”
Stock # HP Amps.Volts RPM RotationShaftEncl.
Cross ReferenceRotom Genteq Century
EM-5469 N/A N/AEM-5460 R6-R43600 3463EM-5461 R6-R43601 3464EM-5470 R6-R43602 3466EM-5471 R6-R43603 3467
N/AFDL6001AFD6000AFDL6002AFD6001A
Marathon
N/AX077X073X074X075
Fasco
N/AD2835D833D2832D2833
6.74”9.80”9.80”11.60”11.60”
“C” Dim.
48 Frame - Four Speed
18Universal Electric Motors(●) Ball Bearing
Stock # HP Range Amps.Volts RPM RotationShaftEncl.
EM-5522ET ● 1/3 - 1/5 4.02 / 2.70115 / 230 1075/5 REV.1/2” x 4.50”OPENEM-5532ET ● 1/2 - 1/4 6.20 / 3.90115 / 230 1075/5 REV.1/2” x 4.50”OPENEM-5542ET ● 3/4 - 1/3 8.50 / 5.20115 / 230 1075/5 REV.1/2” x 4.50”OPENEM-5552ET ●
EM-5522ETEM-5532ET
EM-5542ETEM-5552ET
1 - 1/2 11.50 / 6.90115 / 230 1075/5 REV.1/2” x 4.50”OPEN
Features:
ECM Direct Drive Blower Motors
RESCUE EcoTech
Formerly Emerson Motors
• Electronically Controlled Brushless Permanent Magnet Motor• Up to 82% Efficiency• Saves 25% of the Watts in A/C or Heating• 75% Watt Reduction in Circulation Mode• Easy Voltage Change from 230V to 115V• Electronically Protected Motor• Continous Duty, Air Over• No Capacitor Required• 6000V Surge Protection• Reversible Rotation• Class ‘B’ Insulation• 36” Leads• 40°C Ambient• Ball Bearings
All Models48 Frame - Five SpeedActual connections may vary
• Active Airflow Management – The advanced motor control reacts to change in static pressure, helping to maintain airflow as vents are closed or the filter
• Very Energy Efficient – The RESCUE EcoTech motor is up to 25% more electrically efficient at high speed compared to a standard blower motor.
• Quiet, Efficient Circulation Speed – With a low 600 RPM circulation speed, your customers can cycle air continuously without the noise, draft or electricity cost of
®
N/A 6103E * N/A N/AR6-R75531R6-R755301
6105E * 06005 CSL1056CS1056
N/A 6107E * N/A N/A
Cross Reference
R6-R75551R6-R755501
6110E * 06010 CSL1106CS1106
Rotom Genteq Mars Century
75% watt reduction in circulation mode.
a PSC motor. Often using less energy than a 100 watt bulb. Up to 75% watts savings are typical.
becomes dirty.
• Fits a Wide Variety of Applications – The fully reversible motor comes in a range of horsepower sizes to fit your market and is dual voltage so you can provide anindoor blower solution to all your customers.
(*) 115 Volt Only
9.75”9.75”10.75”11.25”
“C” Dim.
(●) Ball Bearing (*) P.S.C. Design 19 Universal Electric Motors
• Single Phase P.S.C.• Thermally Protected• Reversible Rotation• 36” Leads• Continuous Duty, Air Over• Extended Mounting Studs• High Efficiency Design• Ball Bearings
Features:
Stock # HP Range Amps.Volts RPM Rotation“C” Dim. ShaftEncl.
9722 ●* 1/8 - 1/12 0.90208-230 1075 REV.7.50” 1/2” x 3.00”T.E.9723 ●* 1/4 - 1/6 2.00208-230 1075 REV.7.50” 1/2” x 3.00”T.E.9724 ●* 1/4 - 1/6 1.60208-230 1625 REV.7.50” 1/2” x 3.00”T.E.
42 Frame
Condenser Fan Motors
Formerly A.O. Smith Electrical Products Company
Motor Mount Brackets & Capacitors
1330A Rain Shield for 1/2” Shaft1383A Rain Shield for 5/8” Shaft
1330A - 1383A
All Models
5” (42 Frame) 9” & 10” B.C.D. 3 Lugs5-5/8” (48 Frame) 9” & 10” B.C.D. 3 Lugs5-5/8” (48 Frame) 9” & 10” B.C.D. 4 LugsHeavy Duty 5-5/8” (48 Frame) 10” B.C.D. 3 LugsHeavy Duty 5-5/8” (48 Frame) 11” B.C.D. 3 LugsHeavy Duty 5-5/8” (48 Frame) 15” B.C.D. 4 LugsHeavy Duty 5-5/8” (48 Frame) 16” B.C.D. 4 Lugs
Description
1482A
EM-43EM-44
EM-43 - EM-44
EM-39
EM-39
EM-17
EM-17 - EM-23
EM-23EM-24EM-29
EM-24 - EM-29
Capacitor Mounting Bracket & Rubber CoverPOC5-1 5mfd / 370V. Oval Case
7.5mfd / 370V. Oval CasePOC10-1 10mfd / 370V. Oval CasePOC7.5-1
15mfd / 370V. Oval CasePOC15-1
Stock #
POC5-1 - POC7.5-1POC10-1 - POC15-1
1482A
Accessories
60°C Ambient
20Universal Electric Motors(●) Ball Bearing (*) P.S.C. Design
Features:
Condenser Fan Motors
• High Efficiency P.S.C. Design• EZ-FIT® Mounting System to Cover 4.3”, 4.4” or 4.6” Bolt Circle Mounts• High 70°C (158°F) Ambient Design• Automatic Reset Thermal Overload Protector• Designed for Use with 370V Capacitors• Special Treated Rotor For Corrosion Protection• Totally Enclosed, Air Over (TEAO)• Continous Duty, Air Over• Extended Mounting Studs• Reversible Rotation• 36” Leads• Ball Bearings
All Models
M4-R2722 2S005, 2251 9722 G2243, G2248, G2249
M4-R2723 2S003, 2250 9723 G2247, G2246, G2244, G2245
Cross ReferenceRotom *
(*) These motors are rated 60°C Ambient
Genteq * Century * Fasco *
Stock # HP Range Amps.Volts RPM Rotation“C” Dim. ShaftEncl.
EM-5440H ●* 1/8 - 1/12 0.80208-230 1075 REV.8.00” 1/2” x 3.00”T.E.EM-5441H ●*
EM-5440H
EM-5441H
1/4 - 1/6 1.50208-230 1075 REV.8.50” 1/2” x 3.00”T.E.
42 Frame
Formerly Emerson Motors
Ultimate Truck Stock Motor ™
EZ-FIT® Motor Mounting Bracket
Easily adapts to a 4.4" or 4.6" bolt circle for other applications Assembled out of the box to use as a clam shell replacement. 4.3" Bolt Circle
Clam Shell4.6" Bolt Circle3 Pc
4.4" Bolt Circle3 Pc
EM-5442H ●* 1/4 - 1/6 1.60208-230 1625 REV.8.50” 1/2” x 3.00”T.E.
70°C Ambient
M4-R2724 N/A 9724 N/AEM-5442H
(●) Ball Bearing21 Universal Electric Motors
Features:
Condenser Fan Motors
• Single Phase P.S.C.• Totally Enclosed, Air Over• Reversible Rotation• Automatic Overload• Ball Bearings
Stock # HP Amps.Volts RPM Rotation“A” Dim. ShaftEncl.
SS3403 ● 1/6 1.10208-230 825 REV. 4.11” 1/2” x 6.00”T.E.A.OSS3404 ● 1/4 1.50208-230 825 REV. 4.61” 1/2” x 6.00”T.E.A.OSS3405 ● 1/3 1.80208-230 825 REV. 5.11” 1/2” x 6.00”T.E.A.OSS3746 ● 1/2 2.70208-230 825 REV. 5.61” 1/2” x 6.00”T.E.A.O
Replaces
CF-816, 3203CF-814, 3204CF-813, 3205
CF-812, 3747HS
SS3727 ● 1/6 1.10208-230 1075 REV. 3.86” 1/2” x 6.00”T.E.A.OSS3728 ● 1/4 2.00208-230 1075 REV. 4.11” 1/2” x 6.00”T.E.A.OSS3729 ● 1/3 2.50208-230 1075 REV. 4.61” 1/2” x 6.00”T.E.A.OSS3730 ● 1/2 3.40208-230 1075 REV. 5.11” 1/2” x 6.00”T.E.A.OSS3731 ● 3/4 5.30208-230 1075 REV. 5.36” 1/2” x 6.00”T.E.A.O
CF-3726, 3727CF-3732, 3732CF-3733, 3733CF-3734, 3734CF-3735, 3735
®
Formerly Emerson Motors
Formerly A.O. Smith Electrical Products Company Stock # HP Amps.Volts RPM Rotation“A” Dim. ShaftEncl.
208-230V - 1075 RPMReplaces
Stock # HP Amps.Volts RPM Rotation“A” Dim. ShaftEncl.
575V - 825 RPMReplaces
Stock # HP Amps.Volts RPM Rotation“A” Dim. ShaftEncl.
575V - 1075 RPMReplaces
SS3762 ● 1/2 1.00575 1625 REV. 5.30” 1/2” x 6.50”T.E.A.O R42605, D2750
Stock # HP Amps.Volts RPM Rotation“A” Dim. ShaftEncl.
575V - 1625 RPMReplaces
Stock # HP Amps.Volts RPM Rotation“A” Dim. ShaftEncl.
460V - 825 RPMReplaces
EM-1880 ● 1/4 1.00460 825 REV. 5.10” 1/2” x 6.00”T.E.A.OEM-1881 ● 1/3 1.00460 825 REV. 5.60” 1/2” x 6.00”T.E.A.O
SS3756 ● 1/4 0.70575 825 REV. 4.81” 1/2” x 5.00”T.E.A.OSS3757 ● 1/3 1.10575 825 REV. 5.31” 1/2” x 5.00”T.E.A.O
---3209
------
5FE1036S ● 1/3 0.80575 1100 REV. 5.36” 1/2” x 6.50”T.E.A.O5FE1056S ● 1/2 1.20575 1100 REV. 5.61” 1/2” x 6.50”T.E.A.O5FE1076S ● 3/4 1.90575 1075 REV. 6.11” 1/2” x 6.50”T.E.A.O
R42604R42606R42607
208-230V - 825 RPM
60°C Ambient
22Universal Electric Motors
Features:
Condenser Fan Motors
• Single Phase P.S.C.• Totally Enclosed, Air Over• Reversible Rotation• Automatic Overload• Ball Bearings
Stock # HP Amps.Volts RPM Rotation“A” Dim. ShaftEncl.
SS7403 ●
(●) Ball Bearing
Replaces
SS7727 ● 1/6 1.10208-230 1075 REV. 3.86” 1/2” x 6.00”T.E.A.OSS7728 ● 1/4 2.00208-230 1075 REV. 4.11” 1/2” x 6.00”T.E.A.OSS7729 ● 1/3 2.50208-230 1075 REV. 4.61” 1/2” x 6.00”T.E.A.OSS7730 ● 1/2 3.50208-230 1075 REV. 5.11” 1/2” x 6.00”T.E.A.OSS7731 ● 3/4 5.30208-230 1075 REV. 5.36” 1/2” x 6.00”T.E.A.O
3726HS3732HS3733HS3734HS3735HS
®
Formerly Emerson Motors
Formerly A.O. Smith Electrical Products Company Stock # HP Amps.Volts RPM Rotation“A” Dim. ShaftEncl.
208-230V - 1075 RPMReplaces
Stock # HP Amps.Volts RPM Rotation“A” Dim. ShaftEncl.
575V - 1075 RPMReplaces
Stock # HP Amps.Volts RPM Rotation“A” Dim. ShaftEncl.
460V - 1075 RPMReplaces
SS7736 ● 1/4 1.00460 1075 REV. 4.74” 1/2” x 6.00”T.E.A.OSS7737 ● 1/3 1.30460 1075 REV. 5.24” 1/2” x 6.00”T.E.A.O
1/6 1.10208-230 825 REV. 4.11” 1/2” x 6.00”T.E.A.OSS7404 ● 1/4 1.40208-230 825 REV. 4.68” 1/2” x 6.00”T.E.A.OSS7405 ● 1/3 1.80208-230 825 REV. 5.11” 1/2” x 6.00”T.E.A.OSS7746 ● 1/2 2.50208-230 825 REV. 5.61” 1/2” x 6.00”T.E.A.O
SS3758 ●SS3759 ●SS3760 ●SS3761 ●
3736HS3737HS
SS7738 ● 1/2 1.50460 1075 REV. 5.61” 1/2” x 6.00”T.E.A.O 3738HS
3203HS3204HS3205HS3747HS
1/4 0.60575 1075 REV. 4.31” 1/2” x 5.00”T.E.A.O1/3 0.70575 1075 REV. 5.31” 1/2” x 5.00”T.E.A.O1/2 0.90575 1075 REV. 5.56” 1/2” x 5.00”T.E.A.O3/4 1.60575 1075 REV. 7.31” 1/2” x 5.00”T.E.A.O
------------
208-230V - 825 RPM
70°C Ambient
23 Universal Electric Motors
Features:
Condenser Fan Motors
Ultimate Truck Stock Motor ™
Cross ReferenceRotom
Formerly Emerson Motors
Genteq Century
Stock # HP Range Amps.Volts RPM RotationShaft
EM-5464H ●* 1/3 - 1/6 1.90 - 1.00208-230 825/2 REV.1/2” x 5.00”EM-5462H ●* 1/3 - 1/6 2.60 - 1.80208-230 1075/2 REV.1/2” x 5.00”EM-5465H ●* 1/2 - 1/5 3.00 - 1.30208-230 1075/2 REV.1/2” x 5.00”EM-5482H ●* 3/4 - 1/4 4.00 - 1.40208-230 1075/2 REV.1/2” x 5.00”EM-5480H ●* 1/2 - 1/6 1.30 - 0.50460 1075/2 REV.1/2” x 5.00”EM-5481H ●* 3/4 - 1/4 2.20 - 0.70460 1075/2
10.30”9.60”10.30”11.87”11.10”11.85” REV.1/2” x 5.00”
EM-5464H M2-R22601 3457HS, 3459HSEM-5462H M2-R22600 3456HS, 3458HSEM-5465H M2-R22602 3460HSEM-5482H M2-R22604 N/AEM-5480H N/A N/AEM-5481H N/A N/A
FE6001FFE6000FFE6002FFE6003F
N/AN/A
48 Frame - Two Speed
• High Efficiency P.S.C. Design• High 70°C (158°F) Ambient Design• Automatic Reset Thermal Overload Protector• Designed for Use With 370V Capacitors• Special Treated Rotor For Corrosion Protection• Includes Lead End Mounting Holes For Rheem or Trane Units• Class ‘F’ Insulation• Extended Mounting Studs• Flat Lead End for Shaft Down Applications• Reversible Rotation• Continous Duty, Air Over• 48" Leads with Flag Terminals• Ball Bearings
“C” Dim.
All Models
(●) Ball Bearing (*) P.S.C. Design
70°C Ambient
24Universal Electric Motors
Features:
Condenser Fan Motors
56 Frame - Single Phase
C081 ●* 1 2.20575-1Ø 1075 REV.5/8” x 6.00”O.O.S.E.
Stock # HP Amps.Volts RPM RotationShaftEncl. Replaces
S1516
H564 ● 1/2 2.8-2.6 / 1.30200-230 / 460-3Ø 1140 REV.5/8” x 6.00”O.O.S.E.
H767 ● 1.5 5.8-6.0 / 3.00200-230 / 460-3Ø 1140 REV.5/8” x 6.00”O.O.S.E.
T2532
T2542
C771 ●* 1.5 6.60 / 3.30200-230 / 460-1Ø 1075 REV.5/8” x 6.00”O.O.S.E. S1518181574 ●* 1.5 2.70575-1Ø 1075 REV.5/8” x 6.00”O.O.S.E. S1520
1.5 575-3Ø 2.30 5/8” x 6.00”
RMT0062 ● 1.5 575-3Ø 2.50 5/8” x 2-1/2”
T2543
RMT0062
REV.
REV.
H963 ● 1140
860
O.O.S.E.
O.O.S.E.
C770 ●* 1 4.80 / 2.40200-230 / 460-1Ø 1075 REV.5/8” x 6.00”O.O.S.E. S1514
H686 ● 1 4.4-4.0 / 2.00200-230 / 460-3Ø 850 REV.5/8” x 5.00”O.O.S.E. T2537
H671 ● 1 2.00575-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. T2540
H567 ● 3/4 2.8-3.0 / 1.50200-230 / 460-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. T2534H977 ● 1/2 0.80575-3Ø 1140 REV.5/8” x 3-3/8”T.E. AICH977
H667 ● 1 5.3-5.2 / 2.60200-230 / 460-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. T2538H961 ● 3/4 1.25575-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. T2535
181651 ● 2 2.70575-3Ø 1140 REV.5/8” x 2-1/2”T.E. ---UEX526 ● 2 2.80575-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. T2536, X526MA1074 ● 2 3.10575-3Ø 1140 REV.5/8” x 3.00”T.E. MA1074
UEH699 ● 2 208-230 / 460-3Ø 7.8 / 3.90 5/8” x 6.00” T2544REV.1140O.O.S.E.H978 ● SPL 5.5 / 3.4 / 2.80208-230 / 460/575-3Ø 1140 REV.5/8” x 3-1/2”O.O.S.E. HD52AK652
Formerly A.O. Smith Electrical Products Company
Formerly Emerson Motors
®
• Open Opposite Shaft-End & Totally Enclosed• Single Phase P.S.C. & Three Phase• Round Body & Rigid Base• Reversible Rotation• Auto Protection• Ball Bearings
(●) Ball Bearing (*) P.S.C. Design
C770 - C081 - C771 - 181574
UEH962 - UEH686 - UEH699 - UEX526 H978
181651MA1074RMT0062
H564 - H977- H567 - H961H667 - H962 - H767 - H963
UEH962 ● 1 2.10575-3Ø 850 REV.5/8” x 6.00”O.O.S.E. T2539H962 ● 1 1.60575-3Ø 850 REV.5/8” x 3-1/4”O.O.S.E. T2539
UEH686 ● 1 5.0 / 2.5208-230 / 460-3Ø 850 REV.5/8” x 6.00”O.O.S.E. T2537
56 Frame - Three PhaseStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
25 Universal Electric Motors
Features:
Condenser Fan Motors
• Open Opposite Shaft-End• Inverter Duty• Class ‘F’ Insulation• Automatic Overload• Energy Efficient• Reversible Rotation• Ball Bearings• Removable Bolt-on Base
Stock # HP Amps.Volts RPM Rotation“C” Dim. ShaftEncl.
H1050A ● 1 4.0-4.4 / 2.2208-230/460 1140 REV. 16.30” 5/8” x 6.00”O.O.S.E.H1051A ● 1-1/2 5.8-5.8 / 2.9208-230/460 1140 REV. 17.32” 5/8” x 6.00”O.O.S.E.
H1054A ● 1-1/2 5.0-5.2 / 2.6208-230/460 850 REV. 18.77” 5/8” x 6.00”O.O.S.E.
H1052A ● 2 7.0-7.4 / 3.7208-230/460 1140 REV. 18.32” 5/8” x 6.00”O.O.S.E.
5H1053A ● 1 1.80575 850 REV. 18.30” 5/8” x 6.00”5H1054A ● 1-1/2 3.00575 850 REV. 18.78” 5/8” x 6.00”
O.O.S.E.O.O.S.E.
5H1050A ● 1 2.00575 1140 REV. 16.30” 5/8” x 6.00”O.O.S.E.5H1051A ● 1-1/2 2.40575 1140 REV. 17.30” 5/8” x 6.00”O.O.S.E.
Formerly A.O. Smith Electrical Products Company
56 Frame - Three Phase - 208-230/460V
Stock # HP Amps.Volts RPM Rotation“C” Dim. ShaftEncl.
56 Frame - Three Phase - 575V
H1055A ● 1/2 2.8-2.6 / 1.3208-230/460 1140 REV. 16.09” 5/8” x 6.00”O.O.S.E.H1056A ● 3/4 2.8-3.0 / 1.5208-230/460 1140 REV. 16.20” 5/8” x 6.00”O.O.S.E.
H1053A ● 1 5.0-5.2 / 2.6208-230/460 850 REV. 18.32” 5/8” x 6.00”O.O.S.E.
5H1052A ● 2 3.00575 1140 REV. 18.30” 5/8” x 6.00”O.O.S.E.
(●) Ball Bearing
70°C Ambient
UEH977
H698 ● 2 6.8-6.2 / 3.10208-230/460 1140 REV.5/8” x 6.00” T.E. MA1075
H977 ● 1/2 0.80575-3Ø 1140 REV.5/8” x 3-3/8”T.E.181651 ● 2 2.70575-3Ø 1140 REV.5/8” x 2-1/2”T.E.
AICH977MA1003
MA1074 ● 2 3.10575-3Ø 1140 REV.5/8” x 3.00”T.E. CAN2575
Cancoil ThermalStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
H977 - 181651 - H698
SS605 --- 1.00120 2800 CCWSE3/16” x 1-3/4”SKEL572A 1/20 1.90115 1550 CWSE5/16” x 3.00”OPEN
AIC605D1124
SS358 1/20 2.00115 1550 CWSE5/16” x 3.00”OPEN AIC1052573A 1/15 1.30208-230 1550 CWSE5/16” x 3.00”OPEN D1126
SS359 1/20 1.10208-230 1430 CWSE5/16” x 3.00”OPEN
UEH686 ● 1 5.0 / 2.50208-230/460-3Ø 850 REV.5/8” x 5.00”O.O.S.E.
AIC1053
X507
UEH699 ● 2 7.8 / 3.90208-230/460-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. X509
H962 ● 1 1.60575-3Ø 850 REV.5/8” x 3-1/4”O.O.S.E. X527
UEX526 ● 2 2.80575-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. X526
26Universal Electric Motors
OEM Replacements
Stock # HP Amps.Volts RPM RotationShaftEncl. Replaces
H686 - H962
MA1074
H564
(●) Ball Bearing (*) P.S.C. Design
H977
EM-9662 - EM-9656
EM-9662 ●* OPEN 0.85115 1550 REV.5/16” x 3.00”1/20 MA1009EM-9656 ●* OPEN 0.48208-230 1550 REV.5/16” x 3.00”1/15 MA1010
H977 ● 1/2 0.80575-3Ø 1140 REV.5/8” x 3-3/8”T.E. AICH977
SS302 1/100 0.30240 1400 CCWSE1/4” x 1.50”OPEN E1004
1/2 0.85575 1140 REV.5/8” x 3.30”O.O.S.E. AICH977, T2533, T2529
SS326 1/85 0.50115 1550 CCWSE1/4” x 1.45”OPEN 79101, E1001E1002, E1003
SS3729 ●* 1/3 2.50208-230 1075 REV.1/2” x 6.00”T.E.SS3730 ●* 1/2 3.40208-230 1075 REV.1/2” x 6.00”T.E.
E1022, E1025E1064
H564 ● 1/2 2.8-2.6 / 1.30200-230/460 1140 REV.5/8” x 6.00”O.O.S.E. E1020, E1066
SS3729 - SS3730
SS605 572A - 573A SS358 - SS359 SS302 SS326
EM-9662 ●* OPEN 0.85115 1550 REV.5/16” x 3.00”1/20 MA1009EM-9656 ●* OPEN 0.48208-230 1550 REV.5/16” x 3.00”1/15 MA1010
EM-9662 - EM-9656
Blanchard-NessUEH962 - UEH699 - UEH686
UEX526 - UEH977
UEH962 ● 1 2.10575-3Ø 850 REV.5/8” x 6.00”O.O.S.E. X527
H686 1 4.4-4.0 / 2.00200-230/460-3Ø 850 REV.5/8” x 5.00”O.O.S.E. T2537
27 Universal Electric Motors(●) Ball Bearing (*) P.S.C. Design
254 35W 1.40115 1500 CWLEHublessOPEN256 35W 0.70230 1500 CWLEHublessO.O.S.E
R3511, 050-0227-01R3512, 050-0227-02
174A * 1/6 1.00208-230 1625 REV.1/2” x 2-1/2”OPEN R3051260 50W 0.85230 1500 CWLE3/8” x 1-1/2”OPEN R5012, 050-0017-01
OCP0251 * 1/6 1.50230 1625 CCWSE1/2” x 2-1/2”OPENOCP0250 * 1/4 1.50230 1625 CWLE1/2” x 2-1/2”OPEN
050-0251-00050-0250-00
OCP1024 ●* 1/4 1.50208-230 1625 CWLE1/2” x 3.00”OPEN R3047, 050-0107-01
OEM Replacements
CopelandStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
EM-1265 * 1/6 0.55460 1550 CWLE1/2” x 3-1/16”OPEN 050-0265-01EM-1275 * 1/4 0.70575 1625 CWLE1/2” x 3.00”OPEN 050-0250-02
050-0266-02
254 - 256 260 174A OCP1024OCP0251 - OCP0250
HD60FE575 ● 5 5.60575-3Ø 1725 REV.7/8” x 3-1/4”OPEN HD60FE575
SS1506 ●* 1/2 1.80575 1075 CCWLE1/2” x 1-9/16”SEMI-ENCLOCA1056 ●* 1/2 4.60 / 2.30200-230 1075 REV.1/2” x 1-9/16”SEMI-ENCL
CCFM12575, HC43VE5753288, HC43VE200B
H953V1 ● 2 2.40575-3Ø 1800 REV.7/8” x 2.30”OPEN F21853, HD52GA8755BD1106 ●* 1 2.40575 1075/2 REV.1/2” x 5.00”OPEN F1575DD, 50HJ900575
H955L ● 3 3.60575-3Ø 1800 REV.7/8” x 2.30”OPEN
181574 ● 1.5 2.70575 1075 REV.5/8” x 6.00”O.O.S.E.
F31853, HD58DL575
CCFM1575, HC51TE575
H979L ● 5 15.00 / 7.40208-230/460-3Ø 1725 REV.7/8” x 2-5/16”OPEN HD60FK652H978 ● SPL 5.5/3.4/2.8208-230/460/575-3Ø 1140 REV.5/8” x 3-5/8”O.O.S.E. HD52AK652
H980L ● 3 10.60 / 4.80208-230/460-3Ø 1725 REV.7/8” x 2-5/16”OPEN HD60FK651
CarrierStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
H979L - H980LH978
OCA1056 - SS15065OCA3056
HD60FE575
5BD1106 H953V1
5OCA3056 ● 1/2 1.00575-3Ø 1140 REV.1/2” x 2-1/2”SEMI-ENCL HD44ML461, P48J6A2
UEH955 ● 3 3.40575-3Ø 1800 REV.7/8” x 2.30”OPEN F31853, HD58DL575
H955L
UEH955 - UEH953
UEH953 ● 2 2.70575-3Ø 1725 REV.7/8” x 2-1/4”OPEN F21853, HD52GA875
181574
EM-1265 - EM-1275
(●) Ball Bearing (*) P.S.C. Design 28Universal Electric Motors
OEM Replacements
SS605 --- 1.00120 2800 CCWSE3/16” x 1-3/4”SKEL572A 1/20 1.90115 1550 CWSE5/16” x 3.00”OPEN
AIC605D1124
SS9721 ●* 1/12 1.10/0.60115/208-230 1550 REV.5/16” x 3.15”OPEN R90721, 253-9101
573A 1/15 1.30208-230 1550 CWSE5/16” x 3.00”OPEN D1126
SS3729 ● 1/3 2.50208-230 1075 REV.1/2” x 6.00”T.E.SS3730 ● 1/2 3.40208-230 1075 REV.1/2” x 6.00”T.E.
CF-3733
EM-4941 ●* 1/2 2.80/1.50208-230/460 1100 REV.1/2” x 4-1/2”T.E. ---CF-3734
Heatcraft (Bohn/Larkin)Stock # HP Amps.Volts RPM RotationShaftEncl. Replaces
SS605 SS3729 - SS3730 EM-4941572A - 573A EM-9662 - EM-9656
EM-9662 ●* OPEN 0.85115 1550 REV.5/16” x 3.00”1/20 5001L, 5008S, 5004L5034L, 5034LS, 5008SS
EM-9656 ●* OPEN 0.48208-230 1550 REV.5/16” x 3.00”1/15 7190-0442, 253091015008T, 5034M, 5034MS
SS9721
160A * 1/3 3.00208-230 1625 REV.1/2” x 4.00”OPENOHR1106 ●* 1 7.10 / 6.40208-230 1075 REV.1/2” x 3-3/4”SEMI-ENCL
R3001, PP3955BR3067, PP19162G
HillStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
160A OHR1106
SS9428 1 1.70575 1100 REV.1/2” x 2-3/4”OPEN HM3T007, HM3T010
Dunham BushStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
SS9428
29 Universal Electric Motors(●) Ball Bearing (*) P.S.C. Design
OEM Replacements
173946 ● 2.00575-3Ø 1140 REV.5/8” x 3-1/4”OPEN 1043299-01, T1946187289 ● 1 SPL 2.30575-3Ø 850 REV.5/8” x 3-1/4”OPEN 1062968-001
5BD1076 ●* 3/4 2.30575-1Ø 1075/2 REV.1/2” x 5.00”OPEN F34575DD, HQ1095096
1.25176826 ● 1.25 4.70-5.00208-230-3Ø 1140 REV.5/8” x 3-1/4”OPEN 1043297-001, T1826
SS370 ●* 1/20 0.80115 1550 CCWSE5/16” x 2.80”OPENSS371 ●* 1/20 0.30230 1550 CCWSE5/16” x 2.80”OPEN
R370R371
SS2657 1/15 1.20230 1550 CCWSE3/8” x 2.44”OPEN 81335, R2657SS2269 1/15 2.70115 1050 CWSE1/2” x 2.75”OPEN 160269, R2269
SS2658 1/15 2.30115 1550 CCWSE3/8” x 2.44”OPENFE1026 ●* 1/4 1.80208-230 1075/2 REV.1/2” x 6.00”T.E.A.O.
81356, R2658AICF171672
G004U ● 1/4 0.46575-3Ø 1100 REV.5/8” x 2.93”T.E. 171065, R31065
KeepriteStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
5BD1076 187289176826 - 173946
J055U ●* 1/6 0.80575 1650 REV.1/2” x 3.20”T.E. 77238, 1042140R30575, FM001
H671 ● 1 2.00575-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. T2538H667 ● 1 5.3-5.2/2.6200-230/460-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. T2540
OHS1004 * 1/8 1.00230 1550 CWLE1/2” x 2.00”OPEN174A * 1/6 1.00208-230 1625 REV.1/2” x 2-1/2”OPEN
30113057
OHS10206 ●* 1/5 1.30208-230 1075 CWLE1/2” x 3.00”OPEN 3008/3012OHS1016 * 1/5 1.60230 1075 CWLE1/2” x 3.00”OPEN 3009
OHS9983 ●* 1/2 2.70208-230 1725 CWLE1/2” x 3-1/2”OPENF062P ● 1/20 0.42600 1550 CWSE1/2” x 2-1/2”OPEN
R3051, 259983 206578, HHCFM DA2F062, DA2F091
SS34201 ●* 1/5 0.50575 1075 CCWSE1/2” x 3.30”OPEN 204201, R34201
HussmannStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
J055U H667 - H671F062P
OHS9983OHS1004 174A OHS1016
SS34201
OHS10206
SS370 - SS371 SS2657 - SS2658SS2269 FE1026 G004U
30Universal Electric Motors
OEM Replacements
(●) Ball Bearing (*) P.S.C. Design
EM-1268 * 1/5 3.50115 1075/4 REV.1/2” x 3.50”OPENSS1314 * 1/3 6.00115 1075/4 CCWLE1/2” x 5-1/8”OPEN
P-8-9662DD-1314, F1314D
LX7930 * 3/4 2.30460 1075/3 CWSE1/2” x 2.50”OPEN 43G52019406A ●* 3/4 6.60208-230 1075/3 CCWLE6-1/2” x 5/8” x 5-1/4”OPEN 31C82019405A ●* 3/4 9.70115 1075/5 CCWLE1/2” x 3-1/8”OPEN 45H3301, 28F01
5BD1106 ●* 1 2.40575 1075/2 REV.1/2” x 5.00”OPENH671 ● 1 2.00575-3Ø 1140 REV.5/8” x 6.00”O.O.S.E.
F34575DD, 88C760198G6501
H953V1 ● 2 2.40575-3Ø 1800 REV.7/8” x 2.30”OPEN 32657/F21853
LennoxStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
H671LX7930 - 5BD1106
9405AEM-1268 SS1314
H953V1
9406A
UEH953 ● 2 2.70575-3Ø 1725 REV.7/8” x 2-1/4”OPEN 32657/F21853
UEH953
9627 1/25 1.30115 1550 CWSE5/16” x 1-3/4”T.E.9628 1/20 0.90200-230 1550 CWSE5/16” x 1-1/2”T.E.
11528, JAZP21611529, JA2P217 JA2S149
OKR1096 ● 1/2 2.0-1.9/0.95208-230/460-3Ø 1140 REV.5/8” x 2.00”T.E.A.O.OKR1503 ● 1 4.4-4.0/2.00200-230/460-3Ø 850 REV.5/8” x 3-1/4”O.O.S.E.
150372, 11096151437, 11503
9633, E2064479634, E206448
KrackStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
9627 - 9628
EM-9662 ●* OPEN 0.85115 1550 REV.5/16” x 3.00”1/20EM-9656 ●* OPEN 0.48208-230 1550 REV.5/16” x 3.00”1/15
EM-9662 - EM-9656 OKR1503OKR1096
276 50W 0.85230 1500 CCWLE5/16” x 2-1/2”OPEN981 1/15 0.60460 1550 CCWLE5/16” x 2-1/2”OPEN
810M050A62, TFM502810G037A47, 810G050A49
9487 1/12 1.30230 1500 CWLE5/16” x 2-1/8”OPEN TFM262
OTC6001 1/15 1.30230 1550 CCWLE5/16” x 2-3/4”OPEN 810S050A99
OTC6004 1/20 1.10230 1550 CCWLE5/16” x 2-1/2”OPEN
OTC1862 ●* 1/4 1.90230 1625 CWLE1/2” x 2-3/4”OPEN
810S037B01, R2372
TFM1862OTC1864 ●* 1/4 0.95460 1625 CWLE1/2” x 2-3/4”OPEN TFM1864
EM-1779P * 1/15 0.62230 1625 CCWSE5/16” x 3.00”OPEN TFM502, 810E050A85 F48HXDEJ1779
TecumsehStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
276981 OTC6001 - OTC6004 9487 OTC1862 - OTC1864
31 Universal Electric Motors(●) Ball Bearing (*) P.S.C. Design
OEM Replacements
EM-1775P * 1/20 0.50230 1500 CCWSE5/16” x 3.00”OPEN F48DEF1775, TFM372 810E037A84
EM-1779P - EM-1775P
SS368 1/20 1.80115 1550 CCWSE5/16” x 2-3/4”OPENSS369 1/20 0.90208-230 1550 CCWSE5/16” x 2-3/4”OPEN
RMT-0011RMT-0012
RMT0005 ● 34W 0.80230 1550 CCWSEHublessT.E. NU-34-45-4/1542RMT0004 ● 34W 1.60115 1550 CCWSEHublessT.E. NU-34-45-2/1543
RMT0062 ● 1.5 2.50575-3Ø 860 REV.5/8” x 2-1/2”O.O.S.E.MA1074 ● 2 3.10575-3Ø 1140 REV.5/8” x 3.00”T.E.
43846, 43424RMT-0064
Ref PlusStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
SS368 - SS369 RMT0062 MA1074RMT0004 - RMT0005EM-9662 - EM-9656
EM-9662 ●* OPEN 0.85115 1550 REV.5/16” x 3.00”1/20 MA1009EM-9656 ●* OPEN 0.48208-230 1550 REV.5/16” x 3.00”1/15 MA1010
C663 3/4 4.80-4.20/2.10208-230/460 1100 CCWLE5/8” x 4.00”O.O.S.E.SS2531 1 4.20/2.10208-230/460 1140 REV.5/8” x 6.00”O.O.S.E.
B-0950R2531
SS2535 1 1.50575 1140 REV.5/8” x 3.20”O.O.S.E. R2535
LiebertStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
SS2531 - SS2535C663
(●) Ball Bearing (*) P.S.C. Design 32Universal Electric Motors
OEM Replacements
SS7738 ●* 1/2 1.50460 1075 REV.1/2” x 6.00”T.E.A.O.OYK1056V1 * 1/2 2.50208-230 1090 CWLE1/2” x 4.00”T.E.A.O.
YCM124SD, 024-24100-002024-24110-701, 713
EM-2553 * 1 3.30460 1100/3 REV.1/2” x 4.00”OPEN YEFM1460, 024-21671-000 024-21673-000
5BD1076 ●* 3/4 2.30575 1075/2 REV.1/2” x 5.00”OPEN F34575DD, 024-31946-003
H953V1 ● 2 2.40575-3Ø 1800 REV.7/8” x 2.30”OPEN
H955L ● 3 3.60575-3Ø 1800 REV.7/8” x 2.30”OPEN
F21853, 024-19623-007
F31853, 024-19623-009
YorkStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
H955LH953V1OYK1056V1
SS7738
UEH955 ● 3 3.40575-3Ø 1800 REV.7/8” x 2.30”OPEN F31853, 024-19623-009
UEH953 ● 2 2.70575-3Ø 1725 REV.7/8” x 2-1/4”OPEN F21853, 024-19623-007
UEH953 - UEH955
5FE1056S ●* 1/2 1.20575 1100 REV.1/2” x 6-1/2”T.E.A.O.5FE1054S ●* 1/2 1.40575 1625 REV.1/2” x 6-1/2”T.E.A.O.
D2752D2750
5BD1076 ●* 3/4 2.30575 1075/2 REV.1/2” x 5.00”OPEN F34575DD, 21A309661P015FE1076S ●* 3/4 1.90575 1075 REV.1/2” x 6-1/2”T.E.A.O. D2753, MOT-2607
5BD1106 ●* 1 2.40575 1075/2 REV.1/2” x 5.00”OPEN
H955L ● 3 3.60575-3Ø 1800 REV.7/8” x 2.30”OPEN
F1575DD, X70671181-017 X70671479-001
F31853, MOT-6769 MOT-9800F31853, MOT-6769 MOT-9800
TraneStock # HP Amps.Volts RPM RotationShaftEncl. Replaces
SS9193 ●* 1 2.20575 1075 REV.5/8” x 5-31/32”OPEN X70671655-01, MOT09193
5FE1056S - 5FE1054S - 5FE1076S H955L5BD1076 - 5BD1106 - EM-2553
UEH955 ● 3 3.40575-3Ø 1800 REV.7/8” x 2.30”OPEN
954 - 9608 955 UE955
UEH955
954 * 1/30 0.60115 1100/3 CWLE1/2” x 8-1/2”OPEN9608 * 1/20 0.60115 1100/3 REV.1/2” x 9-7/8”OPEN
MOT-1878, MOT-1875MOT-1875, X70500149-02
680A * 1/8 1.50115 775/3 CCWLE11-1/2” x 1/2” x 11-1/2”OPEN MOT-711
955 * 1/6 2.00115 1500/3 CWLE10-1/2” x 1/2” x 10-1/2”OPEN MOT-1979, MOT-482UE955 * 1/6 2.30115 1500/3 DBL10-1/2” x 1/2” x 10-1/2”OPEN MOT-1979, MOT-482
SS9193
680A
33 Universal Electric Motors
• Open Drip-Proof• Class ‘B’ Insulation• Reversible Rotation• 60 Hz.• Resilient Base• Thermally Protected• 1/2” to 5/8” Sleeve & Key Included• Self-Aligning Sleeve & Sealed Ball Bearings
Features:
Split Phase Belted Fan Motors
All OmniDrive Models
56Z Frame - Two Speed
EM-5793C ● 1/3 6.40115 1725/1140 REV.1/2” x 1.50”OPEN
Stock # HP Amps.Volts RPM RotationShaftEncl.
EM-5795C ● 3/4 11.50115 1725/1140 REV.1/2” x 1.50”OPENEM-5794C ● 1/2 8.70115 1725/1140 REV.1/2” x 1.50”OPEN
“C” Dim.
48 Frame - Single SpeedStock # HP Amps.Volts RPM RotationShaftEncl. “C” Dim.
10.40”10.40”11.30”
EM-841CV ● 1/3 6.40115 1725 REV.1/2” x 1.60”OPENEM-840CV ● 1/4 4.80115 1725 REV.1/2” x 1.60”OPEN 9.40”
EM-1542C ● 1/2 7.80115 1725 REV.1/2” x 1.60”OPEN 9.90”9.90”
All Century Models
®
Formerly Emerson Motors
Formerly A.O. Smith Electrical Products Company
All US Motors Models
(●) Ball Bearing
Stock # HP Amps.Volts RPM Rotation“A” Dim. ShaftEncl.
SS933 1/4 4.80115 1725 REV.6.81” 1/2” x 1.50”OPENSS934 1/3 6.60115 1725 REV.6.81” 1/2” x 1.50”OPENSS935 1/2 8.30115 1725 REV.7.76” 1/2” x 1.50”OPENSS934B ● 1/3 6.60115 1725 REV. 6.81” 1/2” x 1.50”OPENSS935B ● 1/2 7.60115 1725 REV. 6.81” 1/2” x 1.50”OPENSS933D ● 1/4 4.60/2.20-2.10115/208-230 1725 REV.6.75” 1/2” x 1.88”OPENSS934D ● 1/3 6.60/3.40-3.10115/208-230 1725 REV.6.75” 1/2” x 1.88”OPENSS935D ● 1/2 7.60/3.70-3.80115/208-230 1725 REV.8.58” 1/2” x 1.88”OPENSS936D ●^ 3/4 11.60/5.90-5.80115/208-230 1725 REV.10.55” 5/8” x 1.88”OPENGF2024 1/4 5.40115 1725 REV.7.50” 1/2” x 1.50”OPENGF2034 1/3 6.80115 1725 REV.7.80” 1/2” x 1.50”OPENGF2054 1/2 8.00115 1725 REV.8.30” 1/2” x 1.50”OPENRB2024 ● 1/4 5.00115 1725 REV.7.80” 1/2” x 1.50”OPENRB2034 ● 1/3 6.00115 1725 REV.7.50” 1/2” x 1.50”OPENBF2054 ● 1/2 8.20/4.10115/208-230 1725 REV.8.30 1/2” x 1.50”OPEN
48 Frame - Single Speed
(^) 56 Frame
34Universal Electric Motors
• Open Drip-Proof• Class ‘A’ and ‘B’ Insulation• Reversible Rotation• Resilient Base• 5/8” Diameter Shaft• 40°C Ambient• High Starting Torque• Sleeve and Ball Bearings
Features:
Capacitor Start Belt Drive Motors
Stock # HP Amps.Volts RPM Rotation“C” Dim.Encl.
C455 1/3 6.60 / 3.00 - 3.30115 / 208-230 1725 REV.11.10”O.D.P.C403 ● 1/3 6.60 / 3.00 - 3.30115 / 208-230 1725 REV.11.10”O.D.P.C607 1/2 9.00 / 4.00 - 4.50115 / 208-230 1725 REV.11.10”O.D.P.C412V1 ● 1/2 9.00 / 4.00 - 4.50115 / 208-230 1725 REV.11.10”O.D.P.C654 3/4 5.40 - 5.50 / 11.00115 / 208-230 1725 REV.11.10”O.D.P.
C455 N/A N/A N/A N/AN/AC403 180 C216 C216 D6082S1120C607 N/A N/A N/A N/AS1138
Cross Reference
56 Frame
C412V1 1790 C1153 B317 D6084S1146C654 N/A N/A N/A N/AS1168C426V1 1893 C1156 B319 D6086S1174C692 N/A N/A N/A N/AN/A
C426V1 ● 3/4 5.40 - 5.50 / 11.00115 / 208-230 1725 REV.11.10”O.D.P.C692 1 6.20 - 6.30 / 12.60115 / 208-230 1725 REV.11.40”O.D.P.C523V1 ● 1 6.20 - 6.30 / 12.60115 / 208-230 1725 REV.11.90”O.D.P.C621 ● 1-1/2 7.80 - 7.50 / 15.00115 / 208-230 1725 REV.12.70”O.D.P.D13CA2JH9 ● 1/3 8.80 / 3.90 - 4.40115 / 208-230 1725 REV.9.80”O.D.P.EM-1790 ● 1/3 7.40 / 3.70115 / 208-230 1725 REV.9.30”O.D.P.EM-1893 ● 3/4 11.40 / 5.70115 / 208-230 1725 REV.10.80”O.D.P.EM-3187C ● 1 14.00 / 7.00115 / 230 1725 REV.11.80”O.D.P.EM-4242 ● 1-1/2 22.40 / 11.20115 / 208-230 1725 REV.12.80”O.D.P.
C523V1 3187C C1158 C1159 D6088S1199C621 4242 C1160 C1160 D6090S1336
Emerson GE Marathon FascoRotom
All Century Models
Formerly Emerson Motors
Formerly A.O. Smith Electrical Products Company
All US Motors Models
(●) Ball Bearing
35 Universal Electric Motors
• Resilient Base and Rigid Base• Reversible Rotation• 5/8” Diameter Shaft• Open Drip-Proof• 40°C Ambient• Ball Bearings
Features:
Three Phase Belt Drive Motors
Stock # HP Amps.VoltsRPM Shaft Dia.Frame Base
ResilientResilientResilientResilientResilientResilientResilientResilient
ResilientResilientResilientResilient
ResilientResilient
ResilientResilient
Resilient
1/2 1800 460/200-230 1.00/1.9-2.0
1.50/2.8-3.0
1.80/3.5-3.6
1.90/3.5-3.8
2.00/3.7-4.0
2.00/3.7-4.0
2.00
2.00
2.40
5.40
3.60
3.40
2.70
2.30/4.7-4.6
2.80/5.0-5.6
2.80/5.0-5.62.80/5.0-5.6
2.90/6.0-5.8
3.00/6.6-7.07.60-7.8/3.9
4.30/9.0-8.6
4.40/9.0-8.8
6.60/13.4-13.2
9.00-9.0/4.5
4.60/9.0-9.2
15.00/7.40
0.70
0.90
1.50
1.50
1.80
460/200-230
460/200-230
460/200-230
460/200-230460/200-230460/200-230
460/200-230
460/200-230460/200-230
460/200-230
460/200-230460/200-230
460/200-230
460/200-230460/200-230
460/200-230
575
575
575
575
575
575
575
575
575
575208-230/460
208-230/460
575
575
180018001800
1800180018001800
18001800
180018001800
180018001800
180018001800
1800
1800
36003600
36003600
3600
36003600
36003600
3600
1/2
11
11111-1/21-1/21-1/21-1/2
1-1/21-1/21-1/222222333333555
3/43/4
H840 5/8”56565656
56
56H56H56H56H56H
56H56H56H
56H
56H56H
56HZ
56HZ56HZ
56HZ56HZ56HZ56HZ56HZ
56HZ56HZ56HZ56HZ56HZ
56Y
56Y
5/8”5/8”5/8”5/8”5/8”5/8”5/8”5/8”7/8”
7/8”
7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”
7/8”
5/8”5/8”5/8”5/8”
5/8”5/8”
5/8”
H940V1H851V2H941LH842V1H950H852LH942H882H883H843V1H944H853V2H943V1
H884LH885LH951V1H844H952H854
H845
H855L
H954
H847H956H979L *
H980L *
UEH886UEH953
UEH887UEH955
56 Frame
RigidRigid
RigidRigidRigid
RigidRigid
RigidRigidRigidRigidRigidRigidRigid
Formerly A.O. Smith Electrical Products Company
( ) Carrier OEM Replacement
2.0057518001-1/2 56HZ 7/8”UEH951 Rigid
*
®
36Universal Electric Motors
NEMA PREMIUM Drip-Proof Commercial & Industrial Motors
Stock # HP Volts Amps. Efficiency %RPM Frame
D15P2D 15 208-230 / 460 40.00 - 37.00 / 18.30 1800 93.0D20P2D 20 208-230 / 460 54.00 - 49.00 / 24.40 1800 93.0
D2P2D 2 208-230 / 460 5.90 / 2.80 1800 86.5
D1P2D 1 208-230 / 460 3.20 / 1.50 1800 85.5D32P2D 1-1/2 208-230 / 460 4.40 / 2.10 1800 86.5
D5P2D 5 208-230 / 460 13.80 - 13.00 / 6.50 1800 89.5
D10P2D 10 208-230 / 460 26.30 - 23.80 / 11.90 1800 91.7
D3P2D 3 208-230 / 460 8.40 - 7.80 / 3.90 1800 89.5
254T256T
145T
143T145T
184T
215T
182T
D7P2D 7-1/2 208-230 / 460 20.20 - 18.50 / 9.30 1800 91.0213T
D25P2D 25 208-230 / 460 64.00 - 58.00 / 29.00 1800 93.6284T
• Open Drip-Proof• Rigid Base• Class ‘F’ Insulation - Class ‘B’ Rise at Service Factor• Reversible Rotation• 1.15 Sevice Factor• F-1 Assembly• Aluminum End-Shields with Steel Inserts• Light Weight Rolled Steel Frame• Suitable for use with Inverters (VFD)• Double Shielded Bearings (140 - 280 Frame)• Lifting Provisions (210 Frame & Up)• Regreasable Bearings (180 Frame & Up) • Ball Bearings
Features:
Three Phase
D10P2G 10 575 9.80 1800 91.7D15P2G 15 575 14.80 1800 93.0
D32P2G 1-1/2 575 1.70 1800 86.5
D30P2D 30 208-230 / 460 77.00 - 69.00 / 34.00 1800 94.1D1P2G 1 575 1.30 1800 85.5
D3P2G 3 575 3.20 1800 89.5
D7P2G 7-1/2 575 7.20 1800 91.0
D2P2G 2 575 2.20 1800 86.5
215T254T
145T
286T143T
182T
213T
145T
D5P2G 5 575 5.20 1800 89.5184T
D20P2G 20 575 19.20 1800 93.0256TD25P2G 25 575 23.00 1800 94.1D30P2G 30 575 27.70 1800 94.1
284T286T
Formerly Emerson Motors
42/36 Month Warranty *
(*) Note: Warranty Period is 42 Months from Date of Manufacture or 36 Months from Date of Installation on Sine Wave Power or 30 Months from Date of Manufacture or 24 Months from Date of Installation on VFD Power, whichever occurs �rst.
37 Universal Electric Motors
Aluminum FrameThree Phase Motors
• Aluminum Construction• Totally Enclosed Fan Cooled• Continuous Duty• Class ‘B’ Insulation• Removable Bolt-on Feet• Reversible• 40°C Ambient• UL Listed & CSA Approved• 3 Positions for Feet Allow for F-1, F-2, F-0 Conduit Box Location• Inverter Duty 10:1 V.T. / 2:1 C.T.• Ball Bearings• 1.15 S.F.
Features:
®
56 & 56HZ Frame
Stock # HP Amps. “C” FrameShaft (Dia.)Volts
WA631 1/3 12.67”1.26 - 1.14 / 0.57208-230 / 460 5/8” 56 WA611 1/3 12.67”0.46575 5/8” 56
WA632 1/2 12.67”1.82 - 1.64 / 0.82208-230 / 460 5/8” 56WA612 1/2 12.67”0.66575 5/8” 56
WA633 3/4 12.67”2.59 - 2.34 / 1.17208-230 / 460 5/8” 56WA613 3/4 12.67”
WA614 1 13.66”
TA604 1 14.02”
WA634 1 13.66”
TA624 1 14.02”
0.94
1.17
1.17
3.24 - 2.92 / 1.46
3.24 - 2.92 / 1.46
575
575
575
208-230 / 460
208-230 / 460
5/8”
5/8”
7/8”
5/8”
7/8”
56
56H
56HZ
56H
56HZ
WA683 3/4 12.67”WA663 3/4 12.67”
2.94 - 2.66 / 1.331.06
208-230 / 460575
5/8”5/8”
5656
WA661 1/3 12.67”WA681 1/3 12.67”
0.521.43 - 1.30 / 0.65
575208-230 / 460
5/8”5/8”
5656
WA662 1/2 12.67”WA682 1/2 12.67”
0.772.12 - 1.92 / 0.96
575208-230 / 460
5/8”5/8”
5656
WA664 1 13.66”1.39575WA684 1 13.66”3.84 - 3.48 / 1.74208-230 / 460
5/8”5/8”
56H56H
TA654 1 14.02”1.39575TA674 1 14.02”3.84 - 3.48 / 1.74208-230 / 460
7/8”7/8”
56HZ56HZ
®
38Universal Electric Motors
Features:
• Aluminum Construction• Totally Enclosed Fan Cooled• Continuous Duty• Class ‘B’ Insulation• Removable Bolt-on Feet• Reversible• 40°C Ambient• UL Listed & CSA Approved• 3 Positions for Feet Allow for F-1, F-2, F-0 Conduit Box Location• Inverter Duty 10:1 V.T. / 2:1 C.T.• Ball Bearings• 1.15 S.F.
Aluminum FrameThree Phase Motors
TA655 1-1/2 1.91575TA675 1-1/2 5.28 - 4.78 / 2.39208-230/460
7/8”7/8”
56HZ56HZ
14.02”14.02”
WA666 2
TA656 2
WA686 22.43
2.43
6.73 - 6.08 / 3.04575
575
208-230/460
TA676 2 6.73 - 6.08 / 3.04208-230/460
5/8”
7/8”
5/8”
7/8”
56H
56HZ
56H
56HZ
13.66”
14.02”
13.66”
14.02”
TA605 1-1/2TA625 1-1/2
1.704.71 - 4.26 / 2.13
575208-230/460
7/8”7/8”
56HZ56HZ
14.02”14.02”
WA616 2WA636 2
2.186.02 - 5.44 / 2.72
575208-230/460
5/8”5/8”
56H56H
13.66”13.66”
TA606 2 2.18575TA626 2 6.02 - 5.44 / 2.72208-230/460
7/8”7/8”
56HZ56HZ
14.02”14.02”
WA617 3
WA637 33.17
8.76 - 7.92 / 3.96
575208-230/460
5/8”5/8”
56H56H
13.66”13.66”
TA607 3 3.17575TA627 3 8.70 - 7.96 / 3.96208-230/460
7/8”7/8”
56HZ56HZ
14.02”14.02”
WA615 1-1/2WA635 1-1/2
1.704.71 - 4.26 / 2.13
575208-230/460 5/8”
5/8”56H56H13.66”
13.66”
WA665 1-1/2 1.91575WA685 1-1/2 5.28 - 4.78 / 2.39208-230/460
5/8”5/8”
56H56H
13.66”13.66”
56 & 56HZ Frame
Stock # HP Amps. “C” FrameShaft (Dia.)Volts
®
39 Universal Electric Motors
Features:
• Aluminum Construction• Totally Enclosed Fan Cooled• Continuous Duty• Class ‘B’ Insulation• Removable Bolt-on Feet• Reversible• 40°C Ambient• UL Listed & CSA Approved• 3 Positions for Feet Allow for F-1, F-2, F-0 Conduit Box Location• Inverter Duty 10:1 V.T. / 2:1 C.T.• Ball Bearings• 1.15 S.F.
Aluminum FrameThree Phase Motors
56C & 56HCZ Frame
Stock # HP Amps. “C” FrameShaft (Dia.)Volts
WA631C 1/3 12.67”1.26 - 1.14 / 0.57208-230 / 460 5/8” 56C WA611C 1/3 12.67”0.46575 5/8” 56C
WA632C 1/2 12.67”1.82 - 1.64 / 0.82208-230 / 460 5/8” 56CWA612C 1/2 12.67”0.66575 5/8” 56C
WA633C 3/4 12.67”2.59 - 2.34 / 1.17208-230 / 460 5/8” 56CWA613C 3/4 12.67”
WA614C 1 13.66”
TA604C 1 14.02”
WA634C 1 13.66”
TA624C 1 14.02”
0.94
1.17
1.17
3.24 - 2.92 / 1.46
3.24 - 2.92 / 1.46
575
575
575
208-230 / 460
208-230 / 460
5/8”
5/8”
7/8”
5/8”
7/8”
56C
56HC
56HCZ
56HC
56HCZ
WA661C 1/3 12.67”WA681C 1/3 12.67”
0.521.43 - 1.30 / 0.65
575208-230 / 460
5/8”5/8”
56C56C
WA662C 1/2 12.67”WA682C 1/2 12.67”
0.772.12 - 1.92 / 0.96
575208-230 / 460
5/8”5/8”
56C56C
WA683C 3/4 12.67”WA663C 3/4 12.67”
2.94 - 2.66 / 1.331.06
208-230 / 460575
5/8”5/8”
56C56C
WA664C 1 13.66”1.39575WA684C 1 13.66”3.84 - 3.48 / 1.74208-230 / 460
5/8”5/8”
56HC56HC
TA654C 1 14.02”1.39575TA674C 1 14.02”3.84 - 3.48 / 1.74208-230 / 460
7/8”7/8”
56HCZ56HCZ
®
40Universal Electric Motors
Features:
• Aluminum Construction• Totally Enclosed Fan Cooled• Continuous Duty• Class ‘B’ Insulation• Removable Bolt-on Feet• Reversible• 40°C Ambient• UL Listed & CSA Approved• 3 Positions for Feet Allow for F-1, F-2, F-0 Conduit Box Location• Inverter Duty 10:1 V.T. / 2:1 C.T.• Ball Bearings• 1.15 S.F.
Aluminum FrameThree Phase Motors
56C & 56HCZ Frame
WA665C 1-1/2 1.91575WA685C 1-1/2 5.28 - 4.78 / 2.39208-230/460
5/8”5/8”
56HC56HC
13.66”13.66”
TA655C 1-1/2 1.91575TA675C 1-1/2 5.28 - 4.78 / 2.39208-230/460
7/8”7/8”
56HCZ56HCZ
14.02”14.02”
WA666C 2
TA656C 2
WA686C 22.43
2.43
6.73 - 6.08 / 3.04575
575
208-230/460
TA676C 2 6.73 - 6.08 / 3.04208-230/460
5/8”
7/8”
5/8”
7/8”
56HC
56HCZ
56HC
56HCZ
13.66”
14.02”
13.66”
14.02”
WA615C 1-1/2WA635C 1-1/2
1.704.71 - 4.26 / 2.13
575208-230/460 5/8”
5/8”56HC56HC13.66”
13.66”
TA605C 1-1/2TA625C 1-1/2
1.704.71 - 4.26 / 2.13
575208-230/460
7/8”7/8”
56HCZ56HCZ
14.02”14.02”
WA616C 2WA636C 2
2.186.02 - 5.44 / 2.72
575208-230/460
5/8”5/8”
56HC56HC
13.66”13.66”
TA606C 2 2.18575TA626C 2 6.02 - 5.44 / 2.72208-230/460
7/8”7/8”
56HCZ56HCZ
14.02”14.02”
WA617C 3
WA637C 33.17
8.76 - 7.92 / 3.96
575208-230/460
5/8”5/8”
56HC56HC
13.66”13.66”
TA607C 3 3.17575TA627C 3 8.70 - 7.96 / 3.96208-230/460
7/8”7/8”
56HCZ56HCZ
14.02”14.02”
Stock # HP Amps. “C” FrameShaft (Dia.)Volts
41 Universal Electric Motors(●) Ball Bearing
NEMA PREMIUM TEFC Motors
Stock # HP Volts Amps. Efficiency %RPM C Face KitFrame
• Totally Enclosed Construction• Cast Iron Construction• Three Year Warranty• Dual Mounting Holes• Cast Iron Gasketed Conduit Box• Double Lip Seal on Both Ends• Class ‘F’ Insulation - Class ‘B’ Temp. Rise• NEMA MG 1, EEMAC M1-6, CSA C390• Double Sealed ‘ZZ’ Bearings up to (215T Frame)• Standard (Non-Metric) Hardware• F-2 Field Convertible• Conduit Box can be Rotated 90 Degrees• Ground Lug in Conduit Box• Rust Preventative Treated Steel Fan Cover• VPI Insulation System• ‘C’ Face Kits Available• 20:1 V.T. / 10:1 C.T.• Inverter Duty• Regreasable Bearings (254T Frame & Up)• Oversized Ball Bearings
Features:
Three Phase
All Models
TCP657 ●TCP658 ●TCP659 ●TCP65A ●TCP65B ●
87.587.589.589.591.0
CFP18CFP18CFP21CFP21CFP25
TCP65C ●TCP65D ●TCP65E ●TCP65F ●
91.092.492.493.0
CFP25CFP28CFP28CFP32
TCP65H ●TCP65I ●TCP65J ●TCP65K ●
95.095.495.495.4
CFP36CFP36CFP40CFP44
TCP65L ● TCP65M ●
TCP65G ●
95.896.2
93.0
CFP44CFP44
CFP32
182T184T213T215T254T256T284T
286T324T
364T365T405T444T445T447T
326T
357.5101520253040
6075100125150200
50
3.105.207.5010.0014.9019.6023.6028.3037.00
53.6066.6090.00109.00130.00172.00
46.30
575575575575575575575575575
575575575575575575
575
180018001800180018001800180018001800
180018001800180018001800
1800
42Universal Electric Motors
Hot Water Circulator Pump Motors
Stock # HP Volts Amps. RotationType ReplacesBearing
SS1459 1/2 115-208/230 5.7/3.0-2.9 2C REVSS1462 3/4 115-208/230 8.2/4.7-4.2 2C REV
SS1352 1/6 115 3.8 2B CWSE
SS1350 1/12 115 2.5 2A CWSE
R1459R1462
R1352
R1350SS1355 1/6 115 3.8 2A CWSE ----
SS1444 1/4 115 4.6 2C CCWSE
SS1446 1/3 115 6.0 2C CCWSE
R1444
R1446
SS1354 1/4 115 4.6 2B CWSE R1354
BallBall
Ball
BallBall
Ball
Ball
Ball
SS1356 1/3 115 6.0 2B CWSE R1356Ball
C245 ^ 1 230/115 6.5/13.0 4 REV R1463Ball
Type 2A & 2B Type 2C Type 2C
• Open Drip-Proof• Single Phase & Three Phase• Mounting Bracket• 1800 RPM• Permanently Sealed Ball Bearings• Replacements for OEM Motors such as Armstrong (A), Bell & Gossett (B) & Taco (T)
Features:
Stock # HP Volts Amps. RotationType ReplacesBearing
Three Phase
Single Phase
H1048L 1 575 1.4 3 REV.H984 1 208-230/460 3.4-3.4/1.7 4 REV.
H1042L 3/4 208-230/460 2.7-2.8/1.4 3 REV.
H1041L 1/2 208-230/460 1.8-2.0/1.0 3 REV.
R1373(A)
R1370
R1368H1046 1/2 575 0.9 3 REV. R1369
H982 3/4 208-230/460 2.5-2.6/1.3 4 REV.
H1043L 1 208-230/460 3.4-3.4/1.7 3 REV.
(T)
R1371
H1047 3/4 575 1.1 3 REV. R1372
BallSleeve
Ball
BallBall
Sleeve
Ball
Ball
H983 3/4 208-230/460 2.5-2.6/1.3 4 REV. (A,B)Sleeve
H985L 1 208-230/460 3.4-3.4/1.7 4 REV. (B)Sleeve
H1044 1.5 208-230/460 5.7-5.6/2.8 3 REV.
H946L 1 208-230/460 3.7-3.6/1.8 4 REV.
R1374
(T)H947L 1 575 1.4 4 REV. (T)
H986 1.5 208-230/460 4.8-5.0/2.5 4 REV.
H988 3 208-230/460 4.4/9.0-8.8 4 REV.
(A, B)
(T)
H1049V1 1.5 575 2.1 3 REV. R1375 Ball
SleeveSleeve
Sleeve
Ball
Ball
H987 2 208-230/460 6.3-6.4/3.2 4 REV. (T)Ball
Type 3 Type 4
(^) Round Body - No Bracket
Type ‘2A’ 4.67” B.C.D. fits # 2 Bearing Assembly Type ‘2B’ 5.00” B.C.D. fits # 3 & 4 Bearing Assembly Type ‘2C’ 5.875” B.C.D. fits # 5, 6 & 7 Bearing Assembly
Formerly A.O. Smith Electrical Products Company
®
43 Universal Electric Motors
Invertek Drives
OPTIDRIVE E2 - Single PhaseDigital control for Single Phase motors - AC Variable Speed Drive 0.5-1.5 HP (115V & 240V Ratings)
OPTIDRIVE E2 - Single Phase IP66/NEMA 4X EnclosureDigital control for Single Phase motors - AC Variable Speed Drive 0.5-1.5 HP (115V & 240V Ratings)
The Optidrive E2 Single Phase is the world’s first fully digital, fully packaged variable speed drive for controlling low power single phase motors. Designed to be cost effective and easy to use, the OptidriveE2 Single Phase is for use with PSC (Permanent Split Capacitor) or Shaded-Pole Single-Phase inductionmotors. Optidrive E2 Single Phase uses a revolutionary motor control strategy to achieve reliable intelligent starting of single phase motors. Optidrive E2 Single Phase has only 14 standard parameters toadjust in its basic form. The Optidrive's legendary ease of use ensures quick and easy drive commissioning. For the more advanced user the extended parameter set gives access to powerful additional functionality.
Typically used for direct-drive fans and blowers with PSC (permanent-split capacitor) and shaded pole motors on single-phase power. These are typically applications with a starting torque of between 50-100% of motor full load rated torque.
All the same features & performance as above plus:
● Local potentiometer for speed control● Drive FWD/OFF/REV switch - Programmable for Hand / Auto (Local / Remote) applications● Built-In Disconnect - Provides the ability to isolate the motor for maintenance and servicing.
OPTIDRIVE E2 - Three Phase IP20 EnclosureEase of Use - AC Variable Speed Drive 0.5-15 HP (115V, 240V & 480V Ratings)
Rich in features the Optidrive E2 is the most commercially competitive Optidrive in the Optidrive family.Innovative and compact the Optidrive E2 range combines good looks with robustness, reliability and easy to use performance.The product is dedicated to low power applications where total costs are ultra-competitive, including: Competitive purchase price, Low installation costs, Low commissioning costs & Low technical support costs. Optidrive E2 has only 14 standard parameters to adjust in its basic form, thus Optidrive's legendary ease of use could not be easier or quicker to get started with.
Ideal for washdown applications - AC Variable Speed Drive 0.5-10 HP (115V, 240V & 480V Ratings)
Expanding on the success of the Optidrive E2, IP20 and IP55/NEMA 12 products, theOptidrive E2 IP66/NEMA 4X is ideal for food and beverage as well as pharmaceutical applications. The IP66 / NEMA 4X enclosure is a cost-effective, washdown duty Optidrive for low power situations. Ready for high-pressure washdown, the IP66 / NEMA 4X can mount directly on your processing equipment.
OPTIDRIVE E2 - Three Phase IP66/NEMA 4X Enclosure
44Universal Electric Motors
Invertek Drives
OPTIDRIVE HVAC - Three Phase IP20 EnclosureAC Variable Speed Drive 1-350 HP (240V, 480V & 600V Ratings)
Optidrive HVAC sets a new standard for dedicated fan & pump control.
Whilst retaining the ease of use traditionally associated with Invertek Drives, Optidrive HVAC has an innovative design, combined with robust performance to provide powerful flow control and reliability in a compact drive. Example savings based on a 45kW load using Optidrive HVAC compared to direct on-line control, an estimated 20% reduction in speed results in potential energy savings of 50%.
The Optidrive HVAC provides powerful and flexible control that is ideal for applications such as centrifugal pumps and fan units, where large and immediate energy savings can almost always be found.
OPTIDRIVE HVAC - Three Phase IP55 & IP66 EnclosureAC Variable Speed Drive 1-350 HP (240V, 480V & 600V Ratings)
All the same features & performance as the OPTIDRIVE HVAC IP20.
OPTIDRIVE P2 - Three Phase IP20 EnclosureAC Variable Speed Drive 1-350 HP (240V, 480V & 600V Ratings)
The all new Optidrive P2 provides world leading control for both standard inductionmotors and permanent magnet motors.
Open loop vector control of standard induction motors provides up to 200% torque from zero speed. Open and closed loop control of the latest generation of high efficiency PM motors. Closed loop encoder feedback capability for standard induction motors. Extensive I/O and communications interface capabilities ensure the drive can be integrated quickly and efficiently into a wide variety of control systems.A simple parameter structure and carefully selected factory settings ensure fast and easy commissioning..
OPTIDRIVE P2 - Three Phase IP55 & IP66 EnclosureAC Variable Speed Drive 1-350 HP (240V, 480V & 600V Ratings)
All the same features & performance as the OPTIDRIVE P2 IP20 Enclosure.
●IP55/NEMA 12 ‘Un-Switched’
●IP66/NEMA 4X ‘Switched’ includes:- Local potentiometer for speed control- Drive FWD/OFF/REV switch - Programmable for Hand / Auto (Local / Remote) applications- Built-In Disconnect - Provides the ability to isolate the motor for maintenance and servicing.
AT YOUR SERVICE
MORE MOTOR KNOWLEDGE... MORE MOTOR EXPERIENCE...MORE MOTOR VARIETY...
WE ALSO OFFER:
UNIT BEARING MOTORS
ECM REFRIGERATION MOTORS MORE BLOWERS
MORE SKELETON MOTORS
MORE 3.3” DIAMETER MOTORS
PUMP MOTORS
GENERAL PURPOSE MOTORS (IHP)
ELEVATOR DUTY MOTORS
FARM DUTY MOTORS
MORE OEM REPLACEMENT MOTORS
COMPRESSOR DUTY MOTORS MORE 4” DIAMETER MOTORS
MORE 5” DIAMETER MOTORS
MORE 48 FRAME MOTORS
MORE 56 FRAME MOTORS
PM & SHUNT WOUND DC MOTORS
INTEGRITY OF CATALOG: The information contained in this catalogue is for reference purposes only. We strive to ensure that the information is as accurate and current as possible. We are in no way responsible for any errors that may arise. We reserve the right to change specifications and other information included without prior notice. If you are concerned about the validity of the information on a certain product, please visit www.uem.ca and contact us.
DISCLAIMER: All content offered from or available in our catalogue are provided to you on an “as is” basis, without representations, warranties or conditions of any kind. You acknowledge and agree that any reliance by you on any information available in this catalogue shall be at your own risk.reliance by you on any information available in this catalogue shall be at your own risk.
All rights reserved. You may not produce, copy, modify or redistribute the design or layout of any Universal Electric Motors content without written permission.
It is important to note that Universal Electric Motors is not affiliated with any of the original equipment manufacturers or their brands which may be referred to herein. Other trade-marks featured in this catalogue are the property of their respective owners. No association between Universal Electric Motors and any trademark holder is expressed or implied. The names, descriptions, numbers and symbols featured throughout this catalogue are for cross reference purposes onlthroughout this catalogue are for cross reference purposes only.
© Universal Electric Motors. All Rights Reserved.
WWW.UEM.CA
top related