1(: 7+,6 6($621 - universal electric motors · 2015. 4. 20. · unit bearing motors unit bearings...

MOTOR CATALOGUENEW THIS SEASON

www.uem.ca

WE DO MOTORS BEST.

UNIVERSAL ELECTRIC MOTORS

01 Universal Electric Motors

Refrigeration ECM

Stock # Watts Amps.Volts RPM Range ShaftBearingsEncl. Rotation

EC5411 IP66 0.20 - 0.75115 1550 - 1775 HublessBall CWOSE

Features:

4 - 25

EC5411

Ultimate Truck Stock Motor ™

Dual Side Bosses

Std 3-hole styleHussmann 4-hole

• Suitable for Evaporator & Condenser Applications• IP66 Water Tight with all angle Moisture Protection• High Efficiency (up to 65%)• Includes Plug, Speed Nut, Rubber Isolator• Universal Mounting• UL/CUL Approved• Aluminum Frame• Thermally Protected• Robust Ball Bearing System• Replaces: Hussmann, Copeland, Tecumseh, Hill, Tyler, Kysor, Crystal Tips & More..

=+

Kit Sold Seperately

EC5411EC5412

Replaces 51 FrameKit 58

All Models

EC5411 04-R6711, 04-R681104-R9211, 04-R5444

5R016, 5R024,5R025, 5R020, 5R021

9207F2, 9208F29211, 9212, 9213

Cross Reference

Not Available Not Available Not Available

Rotom

Formerly Emerson Motors

Morrill Century

EC5412

EC5412

4 - 25 0.20 - 0.75115 1550 - 1775 HublessBallIP66 CCWOSE

Converts 2-pin Straight to 2-pin 90 Degree

Part No. 2117

ECM Unit Bearing MotorsEnergy Efficient Electronically Commutated Brushless DC Motors

4 to 25 Watts!

Refrigeration ECM

9208F2 T.E. 0.47 - 0.58115 1550 CWOSEHubless

Stock # Watts Amps.Volts RPM RotationShaftEncl. Replaces

R68119207F2 T.E. 0.20 - 0.30115 1550 CWOSEHubless R6711

• Cast Iron Construction• Dual Side Bosses• 2-pin Lyall Plug Included• Up to 65% Efficiency• Standard 3 Hole & 4 Hole (Hussmann Style Mount)• Replaces 6, 9, 12, 14, 15 & 16 Watt P.S.C. & Low Efficiency Shaded Pole Motors

Features:

ECM Unit Bearing MotorsEnergy Efficient Electronically Commutated Brushless DC Motors

14 - 15 - 166 - 9 - 12

Formerly A.O. Smith Electrical Products Company

02Universal Electric Motors

All Models

Refrigeration ECM


ECR161 ● 16 Max. 0.34115 1800 CWOSEHublessT.E.A.O.

ECR161

Many OEM

• Up to 70% Efficiency• Mounting Shroud & Fan Guard Mounting With Four Extended M4 Threaded Thru-Bolts on Motor Shaft Side• Reduce Inventories, One Motor Covers 4W Through 16W Applications• Energy & Cost Saving, Payback In Less Than One Year• CO² Reduction, Eco-Friendly Technology• Drop In Replacement For Traditional Shaded Pole Unit Bearing Motors• ECR Motors Are Ideal For Retrofit & New Installations• Clockwise Opposite Shaft End Rotation, 19” Sleeved Leads With 2 Pin Plug• Rear Mounting With Three Standard 8-32 UNC Threaded Holes• Foot Mounting With 4 Threaded 8-32 UNC Holes• Universal Hubless Shaft Accommodates Standard Axial Fan Blades• Moisture & Humidity Resistant• Input Voltage Range For ECR161 Motor Is 90V…140V• Operating Temperature Range of -10°C to +40°C (14°F to 104°F)• Automatic Thermal Overload/Electronic Protection• Fully Enclosed, Long Life Ball Bearings

Features:

®

6 to 16 Watts!

4 to 16 Watts!


SS671 ● O.F.C. 2.10/1.10115/208-230 1550 CCWSE5/16” x 2.00” GE-1231

672B ● O.F.C. 2.10/1.10115/208-230 1550 CCWOSE5/16” x 2.00” GE-1441

SS672 ● O.F.C. 2.10/1.10115/208-230 1550 CWSE5/16” x 2.00” GE-1441

671B ● O.F.C. 2.10/1.10115/208-230 1550 CWOSE5/16” x 2.00” GE-1231

981 O.F.C. 0.60460 1550 CCWSE5/16” x 2-1/2” 810F050B

G.E. 11 Frame ReplacementsStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

9336 ● O.F.C. 1.10230 1550 CWOSE5/16” x 2-5/8” GE-1336O.F.C. 208-230 1.10 5/16” x 2.00” CCWSESS1332 ● 1550

9664 O.F.C. 1.00208-230 1550 CWOSE5/16” x 2.00” GE-13329663 O.F.C. 1.00208-230 1550 CWOSE5/16” x 1-1/4” GE-10169662 O.F.C. 1.00208-230 1550 CCWOSE5/16” x 2.00” GE-13429661 O.F.C. 2.00115 1550 CCWOSE5/16” x 2.00” GE-13419660 O.F.C. 2.00115 1550 CWOSE5/16” x 2.00” GE-1331

• Open Fan Cooled• Shaded Pole Design• Sleeve and Ball Bearings

Features:

G.E. 11 Frame Replacements

1/15

1/15

1/15

1/15

1/15

1/201/20

1/201/201/201/201/20

SS1332 981671B - 672B

9336All Other Models SS671 - SS672

9665 O.F.C. 208-230 1.00 5/16” x 1-1/4”

GE-1332

GE-1232CWOSE15501/15


®

(●) Ball Bearing

Pedestal Fan Air Circulator Motors

48 Frame - Two Speed

SS647 ●* 1/3 4.40115 1100 / 2 REV.1/2” x 3.00”T.E.A.O.

Stock # HP Amps.Volts RPM RotationShaftEncl. Replaces

General ReplacementSS486 ●* 1/4 3.40115 1100 / 2 REV.1/2” x 3.00”T.E.A.O. General Replacement

Features:

• Yoke Mount - Extended Through Bolts• Totally Enclosed, Air Over• Thermally Protected• Pull Chain• 10’ Cord & Plug• 40°C Ambient• Sealed Ball Bearings

®

All Models

Unit Bearing Motors

Unit Bearings

Unit Bearings

SS5311 6 0.40115 1550 CWLEHublessT.E.



EE5311

SS5811 16 1.00115 1550 CWLEHublessT.E. EE5811

SS5411 9 0.55115 1550 CWLEHublessT.E. EE5411SS5611 9 0.55115 1550 CWLEHublessT.E. EE5611

SS5211 4 0.29115 1550 CWLEHublessT.E. EE5211

276 50 0.85230 1500 CCWLE5/16” x 2-1/2”O.S.E. R5122260 50 0.85230 1500 CWLE3/8” x 1-1/2”O.O.S.E. R5012258 50 1.70115 1500 CWLE3/8” x 1-1/2”O.O.S.E. R5011

252 25 0.60230 1500 CWLEHublessO.O.S.E. R2512250 25 1.10115 1500 CWLEHublessO.O.S.E. R2511

256 35 0.70230 1500 CWLEHublessO.O.S.E. R3512254 35 1.40115 1500 CWLEHublessO.O.S.E. R3511

Features:

All Models

• Shaded Pole Design• Cast Iron Construction• Totally Enclosed

Features:

• Shaded Pole Design• Cast Iron Construction• Open Enclosure

250 - 252 - 254 - 256 258 - 260 276


®


Evaporator Fan Motors

3.3” Diameter

SS103 1/45 0.90115 1550 CWSEHublessT.E.


R103

SS359 1/20 1.10230 1550 CWSE5/16” x 3.20”OPEN R359

SS313 ● 1/15 2.20115 1550 CWSE5/16” x 3.00”OPEN R313SS358 1/20 2.00115 1550 CWSE5/16” x 3.20”OPEN R358

(●) Ball Bearing (*) P.S.C. Design

SS101 1/45 0.90115 1550 CCWSEHublessT.E. R101

SS575 1/20 0.89208-230 1550 CCWSE5/16” x 2.50”OPEN R90575SS574 1/20 1.90120 1550 CCWSE5/16” x 2.50”OPEN R90574SS371 ●* 1/20 0.30230 1550 CCWSE5/16” x 2.80”OPEN R371

SS368 1/20 1.80115 1550 CCWSE5/16” x 2.80”OPEN R368SS360 1/30 1.20115 1550 CCWSE1/4” x 1.75”OPEN R360

SS370 ●* 1/20 0.80115 1550 CCWSE5/16” x 2.80”OPEN R370SS369 1/20 0.95230 1550 CCWSE5/16” x 2.75”OPEN R369

Features: SS101 - SS103 SS358 - SS359SS313 - SS360 - SS368 SS369

SS9721 ●* 1/12 1.10 / 0.60115/208-230 1550 REV.5/16” x 3.15”OPEN R90721

®

SS574 - SS575SS370 - SS371 SS9721

• Open & Totally Enclosed Construction• Shaded Pole & P.S.C. Design• Sleeve and Ball Bearings

Stock # Stack Amps.Volts RPM RotationShaft

SS617SS635

Replaces

SS3670

Skeleton Motors & Kits

3/8 0.22 1900 3/16” x 1-1/4”208-2401-1/2 1.20/0.83 1550 1/4” x 1-1/2”208-2405/8 0.40/0.26 3000 3/16” x 1-9/16”120/240

CWSECCWSECWSE

R635R617

R3670R3100, C01550EM550, VFM100SM550, C65878

‘C’ Frame Skeleton

• Impedance or Thermally Protected• Continuous Duty, Air Over• Mechanically Reversible• Class ‘B’ Insulation

Features:

SS3100 5/8 0.59 3000 CCWSE7/32” x 1-11/16”115

SS3100SS3670SS617 SS635

®



Stock # HP Amps.Volts RPM RotationShaftEncl.

OPEN 0.85115 1550 REV.5/16” x 3.00”

Features:

Evaporator Motors

1/20


Cross ReferenceRotom


Bohn Century Fasco

1/15 0.48208-230 1550 REV.5/16” x 3.00”OPEN

• High Efficiency P.S.C. Design• Uses Over 40% Less Electricity than Shaded Pole Designs• Four 8-32 x 3/4” Stud Extensions at each end• Automatic Reset Thermal Overload Protector• Capacitor Included• Reversing Leads• Ball Bearings have all Angle Thrust System• 15” Cord & Plug (0.250” pin pitch) Includes Adapter for 0.375” pin pitch

EM-9662 ●*

EM-9662

EM-9656

EM-9662

EM-9656

R90721, R358, R1052, R368R90572, R90574

5001L, 5008S, 5004L5034L, 5034LS, 5008SS

574A, 574 D1124, D1101

Blanchard-Ness Larkin Packard Ref Plus

R90721, R359, R1053, R369R90573, R90575, R91125

7190-0442, 253091015008T, 5034M, 5034MS5008TS

573A, 575 D1126, D1125, D1103D1122, D1123

E1052 253-1194, 253091017163-2113, JA2N015N

41101, 41154, 45036 41124, 45008S, 49101

RMT0011

E1053 253-1195, 253091017163-3371, 7163-2135JA2N016N

41103, 41195, 4112645008T, 41125, 49101

RMT0012

EM-9656 ●*

All Models

“A” Dim.

3.26”3.78”

0.250” 0.375”

Adapter Plug (Patent Pending)

3.3” Diameter



Features:

42 Frame


• 4 Bolts on Shaft End on 2.86” B.C.D.• Lyall Plug Included• Up to 65% Efficiency• Replaces Heatcraft, Bohn, Larkin, Chandler & Climate Control ECM Evaporator Motors

Features:

ECM Evaporator Fan Motors

9215L T.E. 1.20115 1625 CWSE5/16” x 2.90” 22617801, 22618001 25307801, 25308001

9215H T.E. 0.70230 1625 CWSE5/16” x 2.90” 22617701, 2261790125307701, 25307901

1/15, 1/20, 1/25

1/15, 1/20, 1/25

All Models


3.3” Diameter


ECR501

All Models

• Up to 70% Efficiency• Energy & Cost Saving, Payback In Less Than One Year• CO² Reduction, Eco-Friendly Technology• Drop In Replacement For Traditional Shaded Pole & P.S.C. Evaporator Fan Motors• Flexible Mounting With Four Extended 8-32 UNC Threaded Thru-Bolts on 2.84” B.C.D. at Both Ends• Clockwise Shaft End Rotation, 19” Sleeved Leads With 2 Pin Plug• Standard 5/16” Shaft Diameter, 2-1/2” Length With 1-3/4” Flat• Moisture & Humidity Resistant, IP42 Enclosure Rating• Operating Temperature Range of -30°C to +40°C (-22°F to 104°F)• Input Voltage Range For ECR501 Motor is 100V…127V ECR502 Motor is 190V…254V• Fully Enclosed, Long Life Ball Bearings• Automatic Thermal Overload/Electronic Protection

ECM Evaporator Fan MotorsEnergy Efficient Electronically Commutated Brushless DC Motors

50 1.13115 1550 CWSE5/16” x 2-1/2”T.E.A.O.ECR502 50 0.67208-230 1550 CWSE5/16” x 2-1/2”T.E.A.O.

Many OEMMany OEM

®

08Universal Electric Motors(*) P.S.C. Design

Condo & Apartment Fan Motors

SS630 --- 0.75120 3000 CCWSE7/32” x 1-13/16”OPENSS260 1/90 0.60115 1500 CCWSE5/16” x 1.09”T.E.


R630R260

SS264 1/75 0.70120 1550 CCWSE5/16” x 2.06”T.E. R264SS262 1/40 1.10115 1550 CCWSE5/16” x 1-1/2”T.E. R262

799 1/8 2.60115 1000 CWSE1/2” x 5.00”OPEN DA3E200,DA3F100, DA3G142

OEM Replacements

SS266 1/20 1.45120 1550 CCWSE5/16” x 1.40”T.E.SS2603 1/35 1.15115 1550 CCWSE1/2” x 2.10”OPEN

R266R2603

SS2605 1/12 3.00115 1050 CCWSE1/2” x 1.98”OPEN R2605SS2604 1/10 2.65120 1550 CCWSE1/2” x 2.05”OPEN R2604

SS2609 1/30 1.21115 1550 CCWSE1/2” x 2.35”T.E.SS2612 1/30 1.21115 1550 CWSE1/2” x 2.35”T.E.

R2609R2612

SS2609 - SS2612SS2603 - SS2604

SS266

SS2605

SS630 SS260 - SS262- SS264

• Shaded Pole Design• Sleeve Bearings• Replacements for Reversomatic & Intercity

Features:

®

SS799 * 1/8 2.10115 1000/5 CWSE1/2” x 5.00”OPENSS2799 * 1/6 2.60115 950/5 CWSE1/2” x 4.40”OPEN

DD-029DD-030

42 & 48 Frame

Fan Coil Motors

• P.S.C. Design• Capacitor Included• Sleeve Bearings• Replacements for Temspec, Unilux, Climetec & Snyder-General

Features:

®

SS799 - SS2799 799



(●) Ball Bearing09 Universal Electric Motors

Features:

ECM Fan Coil Motors


CS89 ● 1/10 1.56115 1100/3 CWLE9.30” x 1/2” x 9.30”OPEN

42 Frame ECM CS89


ECM Fan Coil Replacement

• Energy Efficient ECM Technology• ECM with Internal Control• Up to 65% Efficiency vs. Low Efficiency Shaded Pole• Rotors are Isolated from Shaft to Reduce Motor Vibration• Saves an Average of 69% on Energy Usage• Double Shaft• Open Construction• Resilient Base• 54” Leads• Runs Cooler• Easy to Install• Long Life Ball Bearings

Replaces many Shaded Pole & P.S.C. Motors In Fan Coil, PTACS & Air Conditioners

10Universal Electric Motors(●) Ball Bearing (*) P.S.C. Design

Features:

Elco Replacement Motors

• Shaded Pole & P.S.C. Design• Open & Totally Enclosed• 60 Hz• Sleeve Bearings• Thermally Protected

® Stock # HP Amps.Volts RPM RotationShaftWatts

SS6W115 --- 0.41115 1550 CCWSEHubless6

SS16W115 --- 0.89115 1550 CCWSEHubless16SS9W115 --- 0.58115 1550 CCWSEHubless9

SS16W230 --- 0.50230 1550 CCWSEHubless16SS34W115 --- 1.60115 1550 CCWSEHubless34SS34W230 --- 0.80230 1550 CCWSEHubless34RMT0004 ● --- 1.60115 1550 CCWSEHubless34RMT0005 ● --- 0.80230 1550 CCWSEHubless34SS1586 ●* 1/20 1.07115 1550/2 CWSE1/2” x 3-29/32”41SS1616 ●* 1/8 2.16115 1550/2 CWSE1/2” x 3-3/4”---SS1617 ●* 1/4 - 1/8 2.52 / 1.22115 1090 CWSE1/2” x 3-1/2”---SS1893 ●* 1/15 0.82115 1550/6 CWSE7-3/4” x 1/2” x 7-3/4”50SS1895 ●* 1/4 3.60115 1550/6 CWSE8-7/16” x 1/2” x 8-7/16”420SS7004 ●* 1/15 0.93115 1550/2 CCWSE5/16” x 1-7/16”40

RMT0004 - RMT0005

SS7004SS1586 - SS1616 - SS1617

SS6W115 - SS9W115 SS16W115 - SS16W230SS34W115 - SS34W230

SS1893 - SS1895


89 1/10 3.20115 1050/5 DBL10-11/16” x 1/2” x 10-11/16”OPEN

93V1 1/10 3.20115 1050/5 DBL10” x 3/8” x 10”OPENUE89P * 1/10 2.50115 1050/5 DBL10-1/2” x 1/2” x 10-1/2”OPEN

320 1/15 1.30208-230 1050/3 DBL8-7/8” x 1/2” x 8-7/8”OPEN362 * 1/10 1.70115 1075/4 DBL10-11/16” x 1/2” x 10-11/16”OPEN381 * 1/10 0.81208-230 1075/3 DBL10-11/16” x 1/2” x 10-11/16”OPEN

42 Frame

953 * 1/15 0.80115 1100/3 DBL10-1/2” x 1/2” x 10-1/2”OPEN945A * 1/8 1.20115 1500/3 DBL9” x 1/2” x 7-1/2”OPEN955 * 1/6 2.00115 1500/3 DBL10-1/2” x 1/2” x 10-1/2”OPENUE955 * 1/6 2.30115 1500/3 DBL10-1/2” x 1/2” x 10-1/2”OPEN954 * 1/30 0.60115 1100/3 CCWSE1/2” x 8-1/2”OPEN9608 * 1/20 0.60115 1100/3 REV.1/2” x 9-1/2”OPEN


®

Fan Coil Motors


Penn Ventilator (Zephyr)

Stock # HP Amps.Volts RPM RotationShaft ReplacesDiameter

56342 1/70 115 1.00 / 0.50 1550/2 CWSE3/8” x 5-1/2”56343 0.27 115 1.32 1550/2 CWSE3/8” x 5-3/4”56344 ●* 0.08 115 1.60 / 1.00 1550/2 CWSE3/8” x 4.75”

56346 ●* 0.27 115 3.20 / 1.90 1550/2 CWSE3/8” x 5.50”

56342-056343-0, JA2M41456344-0, JE2H047

56346-0, JE2K0071/12 115 1.60 1050 CCWLE6.10” x 3/8” x 6.10” 56347-056347 ~*

3.3”3.3”3.3”

3.3”3.3”

60024 1/30 115 1.40 1550 CWSE5/16” x 1-1/2”60030 1/80 115 0.74 1400 CWSE1/4” x 1-3/4”

60024-060030-0

1/6 115 3.40 1300/2 CWSE1/2” x 2.65” 60076-060076 ●*

3.3”3.3”5.5”

56348 ~ 1/10 115 3.90 1050 CCWLE6-1/4” x 1/2” x 6-1/4” 56348-05.0”

56345 * 1/25 115 1.00 1050 CWSE3/8” x 4.75” 56345-03.3”

63745 * 1/30 115 0.50 / 0.40 1550/2 CWSE3/8” x 3.69” 63745-063746 ●* 1/12 115 1.50 / 0.90 1550/2 CWSE3/8” x 3.40” 63746-0, JE2H05763747 * 1/7 115 2.50 1550/3 CWSE1/2” x 2.20”63748 * 1/6 115 1.80 1550/3 CWSE1/2” x 2.60”

63821 ● * 1/4 115 2.70 1550 CCWSE1/2” x 2.60”

63748-0

63821-0

63747-0

3.3”3.3”4.4”4.4”

5.0”

63749 ●* 1/4 115 2.80 1725 CWSE1/2” x 3.00” 63749-063750 ●* 1/3 115 4.00 1550/3 CWSE1/2” x 5.55”63751 ●* 1/2 120 5.00 1650/2 CWSE1/2” x 5.50”63752 ●* 3/4 115 8.60 / 9.60 1625 CWSE1/2” x 5.33”

63751-063752-0

63750-05.5”5.5”5.5”5.5”

63699 ●* 1/4 115 3.40 1725 CWSE1/2” x 4.77” 63699-05.5”

63747 - 63748

6382163749 63750

60076 - 63699

63751 - 63752

56342 - 56343 56344

63745 - 63746

56345

56348

56347

60024 - 60030

• Shaded Pole & P.S.C. Design • Capacitor Included• Open Air-Over Design• Wiring Harness w/Plug Supplied• Long Life Self Aligning Sleeve & Sealed Ball Bearings

Features:

OEM Replacements®

56346

(●) Ball Bearing (*) P.S.C. Design (~) Double Shaft



SS462 * 1/12 1.20120 1625/3 CWLE3.50” x 3/8” x 3.56”OPEN

SS2224 1/114 0.75115 1500/2 CWSE3/8” x 2-3/4”OPEN

OEM Replacements

SS2497 1/10 3.40115 1100 CWSE1/2” x 1-5/8”OPEN

SS3234 1/16 2.20115 1550/2 CWSE3/8” x 2-1/2”OPENSS4200 1/23 1.50115 1500 CWSE3/8” x 2-3/4”OPENSS5200 * 1/16 1.50115 1500 CWSE3/8” x 2-1/4”OPENSS6264 1/11 4.60115 1500/2 CWSE1/2” x 6-1/4”OPENSS7274 * 1/4 3.90115 1625/2 CWSE1/2” x 6-1/4”OPENSS8318 * 1/8 2.60115 1550/3 CCWSE1/2” x 2-3/4”OPENSS9316 --- 3.40115 1100 CWSE1/2” x 3-7/8”OPENSS9317 --- 4.30115 1100 CWSE

Replaces

Venmar/ VanEE

Loren CookLomanco

Loren CookLoren CookLoren CookLoren CookLoren CookGreenheckBroanBroan1/2” x 3-7/8”OPEN

SS2497

30080058 1/100 0.61115 1050 CCWSE5/16” x 1-7/8”OPEN30080135 * 1/10 1.80120 1050 CWSE1/2” x 2-3/8”OPEN

BroanBroan

HRV, Venter & Exhaust Fan Motors

SS348 * 1/15 1.30115 1550/2 CWSE Venmar/ VanEE 3/8” x 3.00”OPENSS438 * 1/14 1.46115 1625/2 CCWSE Venmar/ VanEE 5/16” x 1.88”OPEN

SS2655 ●* 1/12 1.34120 1550 CCWLE Nutech3/8” x 2.82”OPEN

950-1020 950-1021

SS8318 30080058SS9316 - SS9317 30080135SS5200 SS6264 - SS7274

SS2655SS2224 - SS3234 - SS4200

11811 1202712026 SS462

950-1020 1/25 1.37115 3000 CCWSE5/16” x 2-1/4”OPEN Tjernlund950-1021 * 1/7 1.50115 3300 CCWSE3/8” x 2.25”OPEN Tjernlund950-1022 ●* 1/5 2.80115 1700 CCWSE1/2" x 3.40”OPEN Tjernlund

11811 * 1/6 2.10120 1630/2 CCWSE3/8” x 1.90”OPEN

12027 * 1/12 1.20120 1625/3 CWLE3.50” x 3/8” x 3.56”OPEN

Venmar/ VanEE12026 •* 1/8 1.89120 1630/3 CWLE2.93” x 3/8” x 2.93”OPEN Venmar/ VanEE

Venmar/ VanEE

SS438SS348

950-1022

®


Stock # Amps. RPM CommentsVolts

UB1 1.20 3000 6’ Cord & Plug115UB3 0.80 3000 6’ Cord & Plug120UB160 1.10 1550 Leads - No Conduit Box115UB265 1.40 1630 Conduit Box115UB465 2.60 1550/2 2 Speed, Conduit Box, Heat Sink115

Replaces

RB1RB3RB160RB265RB465

General Purpose & Greenhouse Blowers

• All Angle Mount• Continuous Duty, Air Over• Class ‘B’ Insulation• Shaded Pole• Thermally Protected• Single & Two Speed Models• Sleeve Bearings

Features:

UB1

UFB500 1.10 2860 Conduit Box

Amps. Hz.

Inline Centrifugal Fans

• Installs in any Position• High Pressure & Volume• 8 Foot Cord & w/Plug Supplied• Mounting Bracket Included• Backwards Inclined Fan Blades• Steel Housing, Baked Powder Coat Finish• Permanently Sealed Ball Bearings• Three Year Warranty

Features:

Stock #

VENT-100 ● 4 INCH 175 98 120 0.97 60VENT-150 ● 6 INCH 435 130 120 0.97 60VENT-200 ● 8 INCH 745 210 120 1.76 60VENT-250 ● 10 INCH 785 230 120 2.00 60VENT-315 ● 12 INCH 1075 295 120 2.50 60

Duct Diameter CFM Watts Volts Amps. Hz.

All Models

120 RFB500

0.901.001.901.902.60

dBA

3.3” Diameter

UB160

UFB500UB265

UB3

UB465

®

®

CFM

200100160265465140


Stock # HP Range Amps.Volts RPM RotationShaftEncl.

1/2 - 1/3

6.40 / 6.60

115 600/1200 600/1200 600/1200 600/1200 600/1200 600/1200

REV.1/2” x 5.50”OPEN3/4

6.30 / 6.10

115 REV.1/2” x 5.50”OPEN1

4.60 / 4.30115 REV.1/2” x 5.50”OPEN

1/2 - 1/33/4

10.60208 - 230208 - 230208 - 230

REV.REV.REV.

1/2” x 5.50”1/2” x 5.50”1/2” x 5.50”

OPEN

Features:

ECM Direct Drive Blower Motors

RESCUE Select


• The ECM Aftermarket Motor that Replaces OEM Constant Torque Blower Motors• Electronically Controlled Brushless Permanent Magnet Motor• Saves 25% of the Watts in A/C or Heating• 75% Watt Reduction in Circulation Mode• A Variety of Mounting Kits are Available• Electronically Protected Motor• Continous Duty, Air Over• 6000V Surge Protection• No Capacitor Required• Voltage 230V or 115V• Up to 82% Efficiency• Reversible Rotation• Class ‘B’ Insulation• 2 Year Warranty • 40°C Ambient• Ball Bearings

48 Frame

Replaces Over 900 OEM X13®† and SelecTech®† ECM Motors

Now Customized for You and Shipped Same Day from Stock !

®

11.75”12.25”12.75”11.75”11.25”12.75”

“C” Dim.

OPENOPEN

EM-6630RS

EM-6650RSEM-6640RS

EM-6631RSEM-6641RSEM-6651RS 1

9.306.40

† All marks shown within this document are properties of their respective owners.

(*) P.S.C. Design 15 Universal Electric Motors

Direct Drive Fan & Blower Motors

• P.S.C. Design• Energy Efficient• Resilient Rings• 40°C Ambient• Reversible Rotation• Open Construction• Class ‘B’ Insulation• Extended Thru Bolts• Rheem Mounting Holes in Shell• Sleeve and Ball Bearings

Features:

SS3463 * 1/2 7.00115 1075/4 1/2” x 5.00”OPENSS3464 * 1/2 3.90208-230 1075/4 1/2” x 5.00”OPEN

Stock # HP Amps.Volts RPM CapacitorShaftEncl.

10/370, 7.5/3705/370

SS3467 * 3/4 3.90208-230 1075/4 1/2” x 5.00”OPEN 5/370SS3466 * 3/4 9.10115 1075/4 1/2” x 5.00”OPEN 5/370

48 Frame - Four SpeedAll Models

FDL6001A 5460 3463 X077 D2835FD6000A 5461 3464 X073 D833

5470 3466 X074 D2832

Cross Reference

FD6001A 5471 3467 X075 D2833

EmersonCentury Genteq Marathon Fasco

R43600R43601R43602R43603

Rotom

FDL6002A

MULTI-HP RATED MOTORS

®

16Universal Electric Motors(●) Ball Bearing

Direct Drive Blower Motors

Features:


EM-1390 1/4 2.80115 1075/3 REV.1/2” x 4.00”OPENEM-1391 1/4 1.50208-230 1075/3 REV.1/2” x 4.00”OPEN

SS3583 1/4 4.20115 1075/3 REV.1/2” x 4-1/2”OPENSS3584 1/4 2.00208-230 1075/3 REV.1/2” x 4-1/2”OPEN

Replaces


D150D151

DD-3583DD-3584

42 Frame - Three Speed

SS3585 1/3 5.50115 1075/3 REV.1/2” x 4-1/2”OPENSS3586 1/3 2.80208-230 1075/3 REV.1/2” x 4-1/2”OPEN SS3587 1/2 7.50115 1075/3 REV.1/2” x 4-1/2”OPENSS3588 1/2 3.60208-230 1075/3 REV.1/2” x 4-1/2”OPEN

DD-3585DD-3586DD-3587DD-3588

SS3589 3/4 10.20115 1075/3 REV.1/2” x 4-1/2”OPENSS3590 3/4 5.50208-230 1075/3 REV.1/2” x 4-1/2”OPENEM-8906 ● 1 12.30115 1075/3 REV.1/2” x 6-7/16”OPENEM-8907 ● 1 5.10208-230 1075/3 REV.1/2” x 6-7/16”OPEN

DD-3589DD-3590R42812R42023

SS1314 1/3 6.00115 1075/4 CCWLE1/2” x 5-1/8”OPEN DD-1314 F1314D

EM-8906 - EM-8907

48 Frame - Three Speed

All OmniDrive Models

• Fits 9” & 10” Bolt Circle Diameter• Reversing Plug• Thermally Protected• 40°C Ambient Rating• Long Life Self-Aligning Sleeve Bearings

Features:


SS752 1/4 3.60115 1075/4 REV.1/2” x 6.00”OPENSS753 1/3 4.80115 1075/4 REV.1/2” x 6.00”OPENSS754 1/2 8.20115 1075/4 REV.1/2” x 6.00”OPEN

Replaces

DD-034DD-035DD-036

48 Frame - Four Speed All Models

SS973 1/3 2.30208-230 1075/4 REV.1/2” x 6.00”OPEN DD-045SS974 1/2 3.80208-230 1075/4 REV.1/2” x 6.00”OPEN DD-046

• Resilient Rings Included• Reversing Plug• Extended Thru Bolts• Thermally Protected• 40°C Ambient Rating• Long Life Self-Aligning Sleeve Bearings

®

®



EM-1390 - EM-1391

(●) Ball Bearing (*) P.S.C. Design 17 Universal Electric Motors

Features:

Direct Drive Blower Motors


• High Efficiency P.S.C. Design• Extended Mounting Studs• Designed for Use With 370V Capacitors• Class ‘B’ Insulation• 36” Leads• Includes Side Shell Holes For Rheem Units• Continous Duty, Air Over• Reversible Rotation• Automatic Reset Thermal Overload Protector• 2.5” Diameter Hub Rings Included• Sleeve and Ball Bearings

All Models


EM-5469 * 1/3 2.40208-230 825/4 REV.1/2” x 2.20”EM-5460 * 1/2 7.30115 1075/4 REV.1/2” x 5.00”EM-5461 * 1/2 3.60208-230 1075/4 REV.1/2” x 5.00”EM-5470 ●* 3/4 8.10115 1075/4 REV.1/2” x 5.00”EM-5471 ●* 3/4

OPENOPENOPENOPENOPEN 4.10208-230 1075/4 REV.1/2” x 5.00”


Cross ReferenceRotom Genteq Century

EM-5469 N/A N/AEM-5460 R6-R43600 3463EM-5461 R6-R43601 3464EM-5470 R6-R43602 3466EM-5471 R6-R43603 3467

N/AFDL6001AFD6000AFDL6002AFD6001A

Marathon

N/AX077X073X074X075

Fasco

N/AD2835D833D2832D2833

6.74”9.80”9.80”11.60”11.60”

“C” Dim.

48 Frame - Four Speed

18Universal Electric Motors(●) Ball Bearing

Stock # HP Range Amps.Volts RPM RotationShaftEncl.

EM-5522ET ● 1/3 - 1/5 4.02 / 2.70115 / 230 1075/5 REV.1/2” x 4.50”OPENEM-5532ET ● 1/2 - 1/4 6.20 / 3.90115 / 230 1075/5 REV.1/2” x 4.50”OPENEM-5542ET ● 3/4 - 1/3 8.50 / 5.20115 / 230 1075/5 REV.1/2” x 4.50”OPENEM-5552ET ●

EM-5522ETEM-5532ET

EM-5542ETEM-5552ET

1 - 1/2 11.50 / 6.90115 / 230 1075/5 REV.1/2” x 4.50”OPEN

Features:

ECM Direct Drive Blower Motors

RESCUE EcoTech


• Electronically Controlled Brushless Permanent Magnet Motor• Up to 82% Efficiency• Saves 25% of the Watts in A/C or Heating• 75% Watt Reduction in Circulation Mode• Easy Voltage Change from 230V to 115V• Electronically Protected Motor• Continous Duty, Air Over• No Capacitor Required• 6000V Surge Protection• Reversible Rotation• Class ‘B’ Insulation• 36” Leads• 40°C Ambient• Ball Bearings

All Models48 Frame - Five SpeedActual connections may vary

• Active Airflow Management – The advanced motor control reacts to change in static pressure, helping to maintain airflow as vents are closed or the filter

• Very Energy Efficient – The RESCUE EcoTech motor is up to 25% more electrically efficient at high speed compared to a standard blower motor.

• Quiet, Efficient Circulation Speed – With a low 600 RPM circulation speed, your customers can cycle air continuously without the noise, draft or electricity cost of

®

N/A 6103E * N/A N/AR6-R75531R6-R755301

6105E * 06005 CSL1056CS1056

N/A 6107E * N/A N/A

Cross Reference

R6-R75551R6-R755501

6110E * 06010 CSL1106CS1106

Rotom Genteq Mars Century

75% watt reduction in circulation mode.

a PSC motor. Often using less energy than a 100 watt bulb. Up to 75% watts savings are typical.

becomes dirty.

• Fits a Wide Variety of Applications – The fully reversible motor comes in a range of horsepower sizes to fit your market and is dual voltage so you can provide anindoor blower solution to all your customers.

(*) 115 Volt Only

9.75”9.75”10.75”11.25”

“C” Dim.

(●) Ball Bearing (*) P.S.C. Design 19 Universal Electric Motors

• Single Phase P.S.C.• Thermally Protected• Reversible Rotation• 36” Leads• Continuous Duty, Air Over• Extended Mounting Studs• High Efficiency Design• Ball Bearings

Features:

Stock # HP Range Amps.Volts RPM Rotation“C” Dim. ShaftEncl.

9722 ●* 1/8 - 1/12 0.90208-230 1075 REV.7.50” 1/2” x 3.00”T.E.9723 ●* 1/4 - 1/6 2.00208-230 1075 REV.7.50” 1/2” x 3.00”T.E.9724 ●* 1/4 - 1/6 1.60208-230 1625 REV.7.50” 1/2” x 3.00”T.E.

42 Frame

Condenser Fan Motors


Motor Mount Brackets & Capacitors

1330A Rain Shield for 1/2” Shaft1383A Rain Shield for 5/8” Shaft

1330A - 1383A

All Models

5” (42 Frame) 9” & 10” B.C.D. 3 Lugs5-5/8” (48 Frame) 9” & 10” B.C.D. 3 Lugs5-5/8” (48 Frame) 9” & 10” B.C.D. 4 LugsHeavy Duty 5-5/8” (48 Frame) 10” B.C.D. 3 LugsHeavy Duty 5-5/8” (48 Frame) 11” B.C.D. 3 LugsHeavy Duty 5-5/8” (48 Frame) 15” B.C.D. 4 LugsHeavy Duty 5-5/8” (48 Frame) 16” B.C.D. 4 Lugs

Description

1482A

EM-43EM-44

EM-43 - EM-44

EM-39

EM-39

EM-17

EM-17 - EM-23

EM-23EM-24EM-29

EM-24 - EM-29

Capacitor Mounting Bracket & Rubber CoverPOC5-1 5mfd / 370V. Oval Case

7.5mfd / 370V. Oval CasePOC10-1 10mfd / 370V. Oval CasePOC7.5-1

15mfd / 370V. Oval CasePOC15-1

Stock #

POC5-1 - POC7.5-1POC10-1 - POC15-1

1482A

Accessories

60°C Ambient


Features:


• High Efficiency P.S.C. Design• EZ-FIT® Mounting System to Cover 4.3”, 4.4” or 4.6” Bolt Circle Mounts• High 70°C (158°F) Ambient Design• Automatic Reset Thermal Overload Protector• Designed for Use with 370V Capacitors• Special Treated Rotor For Corrosion Protection• Totally Enclosed, Air Over (TEAO)• Continous Duty, Air Over• Extended Mounting Studs• Reversible Rotation• 36” Leads• Ball Bearings

All Models

M4-R2722 2S005, 2251 9722 G2243, G2248, G2249

M4-R2723 2S003, 2250 9723 G2247, G2246, G2244, G2245

Cross ReferenceRotom *

(*) These motors are rated 60°C Ambient

Genteq * Century * Fasco *

Stock # HP Range Amps.Volts RPM Rotation“C” Dim. ShaftEncl.

EM-5440H ●* 1/8 - 1/12 0.80208-230 1075 REV.8.00” 1/2” x 3.00”T.E.EM-5441H ●*

EM-5440H

EM-5441H

1/4 - 1/6 1.50208-230 1075 REV.8.50” 1/2” x 3.00”T.E.

42 Frame



EZ-FIT® Motor Mounting Bracket

Easily adapts to a 4.4" or 4.6" bolt circle for other applications Assembled out of the box to use as a clam shell replacement. 4.3" Bolt Circle

Clam Shell4.6" Bolt Circle3 Pc

4.4" Bolt Circle3 Pc

EM-5442H ●* 1/4 - 1/6 1.60208-230 1625 REV.8.50” 1/2” x 3.00”T.E.

70°C Ambient

M4-R2724 N/A 9724 N/AEM-5442H


Features:


• Single Phase P.S.C.• Totally Enclosed, Air Over• Reversible Rotation• Automatic Overload• Ball Bearings

Stock # HP Amps.Volts RPM Rotation“A” Dim. ShaftEncl.

SS3403 ● 1/6 1.10208-230 825 REV. 4.11” 1/2” x 6.00”T.E.A.OSS3404 ● 1/4 1.50208-230 825 REV. 4.61” 1/2” x 6.00”T.E.A.OSS3405 ● 1/3 1.80208-230 825 REV. 5.11” 1/2” x 6.00”T.E.A.OSS3746 ● 1/2 2.70208-230 825 REV. 5.61” 1/2” x 6.00”T.E.A.O

Replaces

CF-816, 3203CF-814, 3204CF-813, 3205

CF-812, 3747HS

SS3727 ● 1/6 1.10208-230 1075 REV. 3.86” 1/2” x 6.00”T.E.A.OSS3728 ● 1/4 2.00208-230 1075 REV. 4.11” 1/2” x 6.00”T.E.A.OSS3729 ● 1/3 2.50208-230 1075 REV. 4.61” 1/2” x 6.00”T.E.A.OSS3730 ● 1/2 3.40208-230 1075 REV. 5.11” 1/2” x 6.00”T.E.A.OSS3731 ● 3/4 5.30208-230 1075 REV. 5.36” 1/2” x 6.00”T.E.A.O

CF-3726, 3727CF-3732, 3732CF-3733, 3733CF-3734, 3734CF-3735, 3735

®


Formerly A.O. Smith Electrical Products Company Stock # HP Amps.Volts RPM Rotation“A” Dim. ShaftEncl.

208-230V - 1075 RPMReplaces


575V - 825 RPMReplaces



SS3762 ● 1/2 1.00575 1625 REV. 5.30” 1/2” x 6.50”T.E.A.O R42605, D2750





EM-1880 ● 1/4 1.00460 825 REV. 5.10” 1/2” x 6.00”T.E.A.OEM-1881 ● 1/3 1.00460 825 REV. 5.60” 1/2” x 6.00”T.E.A.O

SS3756 ● 1/4 0.70575 825 REV. 4.81” 1/2” x 5.00”T.E.A.OSS3757 ● 1/3 1.10575 825 REV. 5.31” 1/2” x 5.00”T.E.A.O

---3209

------

5FE1036S ● 1/3 0.80575 1100 REV. 5.36” 1/2” x 6.50”T.E.A.O5FE1056S ● 1/2 1.20575 1100 REV. 5.61” 1/2” x 6.50”T.E.A.O5FE1076S ● 3/4 1.90575 1075 REV. 6.11” 1/2” x 6.50”T.E.A.O

R42604R42606R42607

208-230V - 825 RPM

60°C Ambient


Features:


• Single Phase P.S.C.• Totally Enclosed, Air Over• Reversible Rotation• Automatic Overload• Ball Bearings


SS7403 ●

(●) Ball Bearing

Replaces

SS7727 ● 1/6 1.10208-230 1075 REV. 3.86” 1/2” x 6.00”T.E.A.OSS7728 ● 1/4 2.00208-230 1075 REV. 4.11” 1/2” x 6.00”T.E.A.OSS7729 ● 1/3 2.50208-230 1075 REV. 4.61” 1/2” x 6.00”T.E.A.OSS7730 ● 1/2 3.50208-230 1075 REV. 5.11” 1/2” x 6.00”T.E.A.OSS7731 ● 3/4 5.30208-230 1075 REV. 5.36” 1/2” x 6.00”T.E.A.O

3726HS3732HS3733HS3734HS3735HS

®


Formerly A.O. Smith Electrical Products Company Stock # HP Amps.Volts RPM Rotation“A” Dim. ShaftEncl.

208-230V - 1075 RPMReplaces





SS7736 ● 1/4 1.00460 1075 REV. 4.74” 1/2” x 6.00”T.E.A.OSS7737 ● 1/3 1.30460 1075 REV. 5.24” 1/2” x 6.00”T.E.A.O

1/6 1.10208-230 825 REV. 4.11” 1/2” x 6.00”T.E.A.OSS7404 ● 1/4 1.40208-230 825 REV. 4.68” 1/2” x 6.00”T.E.A.OSS7405 ● 1/3 1.80208-230 825 REV. 5.11” 1/2” x 6.00”T.E.A.OSS7746 ● 1/2 2.50208-230 825 REV. 5.61” 1/2” x 6.00”T.E.A.O

SS3758 ●SS3759 ●SS3760 ●SS3761 ●

3736HS3737HS

SS7738 ● 1/2 1.50460 1075 REV. 5.61” 1/2” x 6.00”T.E.A.O 3738HS

3203HS3204HS3205HS3747HS

1/4 0.60575 1075 REV. 4.31” 1/2” x 5.00”T.E.A.O1/3 0.70575 1075 REV. 5.31” 1/2” x 5.00”T.E.A.O1/2 0.90575 1075 REV. 5.56” 1/2” x 5.00”T.E.A.O3/4 1.60575 1075 REV. 7.31” 1/2” x 5.00”T.E.A.O

------------

208-230V - 825 RPM

70°C Ambient


Features:



Cross ReferenceRotom


Genteq Century

Stock # HP Range Amps.Volts RPM RotationShaft

EM-5464H ●* 1/3 - 1/6 1.90 - 1.00208-230 825/2 REV.1/2” x 5.00”EM-5462H ●* 1/3 - 1/6 2.60 - 1.80208-230 1075/2 REV.1/2” x 5.00”EM-5465H ●* 1/2 - 1/5 3.00 - 1.30208-230 1075/2 REV.1/2” x 5.00”EM-5482H ●* 3/4 - 1/4 4.00 - 1.40208-230 1075/2 REV.1/2” x 5.00”EM-5480H ●* 1/2 - 1/6 1.30 - 0.50460 1075/2 REV.1/2” x 5.00”EM-5481H ●* 3/4 - 1/4 2.20 - 0.70460 1075/2

10.30”9.60”10.30”11.87”11.10”11.85” REV.1/2” x 5.00”

EM-5464H M2-R22601 3457HS, 3459HSEM-5462H M2-R22600 3456HS, 3458HSEM-5465H M2-R22602 3460HSEM-5482H M2-R22604 N/AEM-5480H N/A N/AEM-5481H N/A N/A

FE6001FFE6000FFE6002FFE6003F

N/AN/A

48 Frame - Two Speed

• High Efficiency P.S.C. Design• High 70°C (158°F) Ambient Design• Automatic Reset Thermal Overload Protector• Designed for Use With 370V Capacitors• Special Treated Rotor For Corrosion Protection• Includes Lead End Mounting Holes For Rheem or Trane Units• Class ‘F’ Insulation• Extended Mounting Studs• Flat Lead End for Shaft Down Applications• Reversible Rotation• Continous Duty, Air Over• 48" Leads with Flag Terminals• Ball Bearings

“C” Dim.

All Models


70°C Ambient


Features:


56 Frame - Single Phase

C081 ●* 1 2.20575-1Ø 1075 REV.5/8” x 6.00”O.O.S.E.


S1516

H564 ● 1/2 2.8-2.6 / 1.30200-230 / 460-3Ø 1140 REV.5/8” x 6.00”O.O.S.E.

H767 ● 1.5 5.8-6.0 / 3.00200-230 / 460-3Ø 1140 REV.5/8” x 6.00”O.O.S.E.

T2532

T2542

C771 ●* 1.5 6.60 / 3.30200-230 / 460-1Ø 1075 REV.5/8” x 6.00”O.O.S.E. S1518181574 ●* 1.5 2.70575-1Ø 1075 REV.5/8” x 6.00”O.O.S.E. S1520

1.5 575-3Ø 2.30 5/8” x 6.00”

RMT0062 ● 1.5 575-3Ø 2.50 5/8” x 2-1/2”

T2543

RMT0062

REV.

REV.

H963 ● 1140

860

O.O.S.E.

O.O.S.E.

C770 ●* 1 4.80 / 2.40200-230 / 460-1Ø 1075 REV.5/8” x 6.00”O.O.S.E. S1514

H686 ● 1 4.4-4.0 / 2.00200-230 / 460-3Ø 850 REV.5/8” x 5.00”O.O.S.E. T2537

H671 ● 1 2.00575-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. T2540

H567 ● 3/4 2.8-3.0 / 1.50200-230 / 460-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. T2534H977 ● 1/2 0.80575-3Ø 1140 REV.5/8” x 3-3/8”T.E. AICH977

H667 ● 1 5.3-5.2 / 2.60200-230 / 460-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. T2538H961 ● 3/4 1.25575-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. T2535

181651 ● 2 2.70575-3Ø 1140 REV.5/8” x 2-1/2”T.E. ---UEX526 ● 2 2.80575-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. T2536, X526MA1074 ● 2 3.10575-3Ø 1140 REV.5/8” x 3.00”T.E. MA1074

UEH699 ● 2 208-230 / 460-3Ø 7.8 / 3.90 5/8” x 6.00” T2544REV.1140O.O.S.E.H978 ● SPL 5.5 / 3.4 / 2.80208-230 / 460/575-3Ø 1140 REV.5/8” x 3-1/2”O.O.S.E. HD52AK652



®

• Open Opposite Shaft-End & Totally Enclosed• Single Phase P.S.C. & Three Phase• Round Body & Rigid Base• Reversible Rotation• Auto Protection• Ball Bearings


C770 - C081 - C771 - 181574

UEH962 - UEH686 - UEH699 - UEX526 H978

181651MA1074RMT0062

H564 - H977- H567 - H961H667 - H962 - H767 - H963

UEH962 ● 1 2.10575-3Ø 850 REV.5/8” x 6.00”O.O.S.E. T2539H962 ● 1 1.60575-3Ø 850 REV.5/8” x 3-1/4”O.O.S.E. T2539

UEH686 ● 1 5.0 / 2.5208-230 / 460-3Ø 850 REV.5/8” x 6.00”O.O.S.E. T2537

56 Frame - Three PhaseStock # HP Amps.Volts RPM RotationShaftEncl. Replaces


Features:


• Open Opposite Shaft-End• Inverter Duty• Class ‘F’ Insulation• Automatic Overload• Energy Efficient• Reversible Rotation• Ball Bearings• Removable Bolt-on Base

Stock # HP Amps.Volts RPM Rotation“C” Dim. ShaftEncl.

H1050A ● 1 4.0-4.4 / 2.2208-230/460 1140 REV. 16.30” 5/8” x 6.00”O.O.S.E.H1051A ● 1-1/2 5.8-5.8 / 2.9208-230/460 1140 REV. 17.32” 5/8” x 6.00”O.O.S.E.

H1054A ● 1-1/2 5.0-5.2 / 2.6208-230/460 850 REV. 18.77” 5/8” x 6.00”O.O.S.E.

H1052A ● 2 7.0-7.4 / 3.7208-230/460 1140 REV. 18.32” 5/8” x 6.00”O.O.S.E.

5H1053A ● 1 1.80575 850 REV. 18.30” 5/8” x 6.00”5H1054A ● 1-1/2 3.00575 850 REV. 18.78” 5/8” x 6.00”

O.O.S.E.O.O.S.E.

5H1050A ● 1 2.00575 1140 REV. 16.30” 5/8” x 6.00”O.O.S.E.5H1051A ● 1-1/2 2.40575 1140 REV. 17.30” 5/8” x 6.00”O.O.S.E.


56 Frame - Three Phase - 208-230/460V

Stock # HP Amps.Volts RPM Rotation“C” Dim. ShaftEncl.

56 Frame - Three Phase - 575V

H1055A ● 1/2 2.8-2.6 / 1.3208-230/460 1140 REV. 16.09” 5/8” x 6.00”O.O.S.E.H1056A ● 3/4 2.8-3.0 / 1.5208-230/460 1140 REV. 16.20” 5/8” x 6.00”O.O.S.E.

H1053A ● 1 5.0-5.2 / 2.6208-230/460 850 REV. 18.32” 5/8” x 6.00”O.O.S.E.

5H1052A ● 2 3.00575 1140 REV. 18.30” 5/8” x 6.00”O.O.S.E.

(●) Ball Bearing

70°C Ambient

UEH977

H698 ● 2 6.8-6.2 / 3.10208-230/460 1140 REV.5/8” x 6.00” T.E. MA1075

H977 ● 1/2 0.80575-3Ø 1140 REV.5/8” x 3-3/8”T.E.181651 ● 2 2.70575-3Ø 1140 REV.5/8” x 2-1/2”T.E.

AICH977MA1003

MA1074 ● 2 3.10575-3Ø 1140 REV.5/8” x 3.00”T.E. CAN2575

Cancoil ThermalStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

H977 - 181651 - H698

SS605 --- 1.00120 2800 CCWSE3/16” x 1-3/4”SKEL572A 1/20 1.90115 1550 CWSE5/16” x 3.00”OPEN

AIC605D1124

SS358 1/20 2.00115 1550 CWSE5/16” x 3.00”OPEN AIC1052573A 1/15 1.30208-230 1550 CWSE5/16” x 3.00”OPEN D1126

SS359 1/20 1.10208-230 1430 CWSE5/16” x 3.00”OPEN

UEH686 ● 1 5.0 / 2.50208-230/460-3Ø 850 REV.5/8” x 5.00”O.O.S.E.

AIC1053

X507

UEH699 ● 2 7.8 / 3.90208-230/460-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. X509

H962 ● 1 1.60575-3Ø 850 REV.5/8” x 3-1/4”O.O.S.E. X527

UEX526 ● 2 2.80575-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. X526


OEM Replacements


H686 - H962

MA1074

H564


H977

EM-9662 - EM-9656

EM-9662 ●* OPEN 0.85115 1550 REV.5/16” x 3.00”1/20 MA1009EM-9656 ●* OPEN 0.48208-230 1550 REV.5/16” x 3.00”1/15 MA1010

H977 ● 1/2 0.80575-3Ø 1140 REV.5/8” x 3-3/8”T.E. AICH977

SS302 1/100 0.30240 1400 CCWSE1/4” x 1.50”OPEN E1004

1/2 0.85575 1140 REV.5/8” x 3.30”O.O.S.E. AICH977, T2533, T2529

SS326 1/85 0.50115 1550 CCWSE1/4” x 1.45”OPEN 79101, E1001E1002, E1003

SS3729 ●* 1/3 2.50208-230 1075 REV.1/2” x 6.00”T.E.SS3730 ●* 1/2 3.40208-230 1075 REV.1/2” x 6.00”T.E.

E1022, E1025E1064

H564 ● 1/2 2.8-2.6 / 1.30200-230/460 1140 REV.5/8” x 6.00”O.O.S.E. E1020, E1066

SS3729 - SS3730

SS605 572A - 573A SS358 - SS359 SS302 SS326


EM-9662 - EM-9656

Blanchard-NessUEH962 - UEH699 - UEH686

UEX526 - UEH977

UEH962 ● 1 2.10575-3Ø 850 REV.5/8” x 6.00”O.O.S.E. X527

H686 1 4.4-4.0 / 2.00200-230/460-3Ø 850 REV.5/8” x 5.00”O.O.S.E. T2537

27 Universal Electric Motors(●) Ball Bearing (*) P.S.C. Design

254 35W 1.40115 1500 CWLEHublessOPEN256 35W 0.70230 1500 CWLEHublessO.O.S.E

R3511, 050-0227-01R3512, 050-0227-02

174A * 1/6 1.00208-230 1625 REV.1/2” x 2-1/2”OPEN R3051260 50W 0.85230 1500 CWLE3/8” x 1-1/2”OPEN R5012, 050-0017-01

OCP0251 * 1/6 1.50230 1625 CCWSE1/2” x 2-1/2”OPENOCP0250 * 1/4 1.50230 1625 CWLE1/2” x 2-1/2”OPEN

050-0251-00050-0250-00

OCP1024 ●* 1/4 1.50208-230 1625 CWLE1/2” x 3.00”OPEN R3047, 050-0107-01

OEM Replacements

CopelandStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

EM-1265 * 1/6 0.55460 1550 CWLE1/2” x 3-1/16”OPEN 050-0265-01EM-1275 * 1/4 0.70575 1625 CWLE1/2” x 3.00”OPEN 050-0250-02

050-0266-02

254 - 256 260 174A OCP1024OCP0251 - OCP0250

HD60FE575 ● 5 5.60575-3Ø 1725 REV.7/8” x 3-1/4”OPEN HD60FE575

SS1506 ●* 1/2 1.80575 1075 CCWLE1/2” x 1-9/16”SEMI-ENCLOCA1056 ●* 1/2 4.60 / 2.30200-230 1075 REV.1/2” x 1-9/16”SEMI-ENCL

CCFM12575, HC43VE5753288, HC43VE200B

H953V1 ● 2 2.40575-3Ø 1800 REV.7/8” x 2.30”OPEN F21853, HD52GA8755BD1106 ●* 1 2.40575 1075/2 REV.1/2” x 5.00”OPEN F1575DD, 50HJ900575

H955L ● 3 3.60575-3Ø 1800 REV.7/8” x 2.30”OPEN

181574 ● 1.5 2.70575 1075 REV.5/8” x 6.00”O.O.S.E.

F31853, HD58DL575

CCFM1575, HC51TE575

H979L ● 5 15.00 / 7.40208-230/460-3Ø 1725 REV.7/8” x 2-5/16”OPEN HD60FK652H978 ● SPL 5.5/3.4/2.8208-230/460/575-3Ø 1140 REV.5/8” x 3-5/8”O.O.S.E. HD52AK652

H980L ● 3 10.60 / 4.80208-230/460-3Ø 1725 REV.7/8” x 2-5/16”OPEN HD60FK651

CarrierStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

H979L - H980LH978

OCA1056 - SS15065OCA3056

HD60FE575

5BD1106 H953V1

5OCA3056 ● 1/2 1.00575-3Ø 1140 REV.1/2” x 2-1/2”SEMI-ENCL HD44ML461, P48J6A2

UEH955 ● 3 3.40575-3Ø 1800 REV.7/8” x 2.30”OPEN F31853, HD58DL575

H955L

UEH955 - UEH953

UEH953 ● 2 2.70575-3Ø 1725 REV.7/8” x 2-1/4”OPEN F21853, HD52GA875

181574

EM-1265 - EM-1275

(●) Ball Bearing (*) P.S.C. Design 28Universal Electric Motors

OEM Replacements

SS605 --- 1.00120 2800 CCWSE3/16” x 1-3/4”SKEL572A 1/20 1.90115 1550 CWSE5/16” x 3.00”OPEN

AIC605D1124

SS9721 ●* 1/12 1.10/0.60115/208-230 1550 REV.5/16” x 3.15”OPEN R90721, 253-9101

573A 1/15 1.30208-230 1550 CWSE5/16” x 3.00”OPEN D1126

SS3729 ● 1/3 2.50208-230 1075 REV.1/2” x 6.00”T.E.SS3730 ● 1/2 3.40208-230 1075 REV.1/2” x 6.00”T.E.

CF-3733

EM-4941 ●* 1/2 2.80/1.50208-230/460 1100 REV.1/2” x 4-1/2”T.E. ---CF-3734

Heatcraft (Bohn/Larkin)Stock # HP Amps.Volts RPM RotationShaftEncl. Replaces

SS605 SS3729 - SS3730 EM-4941572A - 573A EM-9662 - EM-9656

EM-9662 ●* OPEN 0.85115 1550 REV.5/16” x 3.00”1/20 5001L, 5008S, 5004L5034L, 5034LS, 5008SS

EM-9656 ●* OPEN 0.48208-230 1550 REV.5/16” x 3.00”1/15 7190-0442, 253091015008T, 5034M, 5034MS

SS9721

160A * 1/3 3.00208-230 1625 REV.1/2” x 4.00”OPENOHR1106 ●* 1 7.10 / 6.40208-230 1075 REV.1/2” x 3-3/4”SEMI-ENCL

R3001, PP3955BR3067, PP19162G

HillStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

160A OHR1106

SS9428 1 1.70575 1100 REV.1/2” x 2-3/4”OPEN HM3T007, HM3T010

Dunham BushStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

SS9428


OEM Replacements

173946 ● 2.00575-3Ø 1140 REV.5/8” x 3-1/4”OPEN 1043299-01, T1946187289 ● 1 SPL 2.30575-3Ø 850 REV.5/8” x 3-1/4”OPEN 1062968-001

5BD1076 ●* 3/4 2.30575-1Ø 1075/2 REV.1/2” x 5.00”OPEN F34575DD, HQ1095096

1.25176826 ● 1.25 4.70-5.00208-230-3Ø 1140 REV.5/8” x 3-1/4”OPEN 1043297-001, T1826

SS370 ●* 1/20 0.80115 1550 CCWSE5/16” x 2.80”OPENSS371 ●* 1/20 0.30230 1550 CCWSE5/16” x 2.80”OPEN

R370R371

SS2657 1/15 1.20230 1550 CCWSE3/8” x 2.44”OPEN 81335, R2657SS2269 1/15 2.70115 1050 CWSE1/2” x 2.75”OPEN 160269, R2269

SS2658 1/15 2.30115 1550 CCWSE3/8” x 2.44”OPENFE1026 ●* 1/4 1.80208-230 1075/2 REV.1/2” x 6.00”T.E.A.O.

81356, R2658AICF171672

G004U ● 1/4 0.46575-3Ø 1100 REV.5/8” x 2.93”T.E. 171065, R31065

KeepriteStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

5BD1076 187289176826 - 173946

J055U ●* 1/6 0.80575 1650 REV.1/2” x 3.20”T.E. 77238, 1042140R30575, FM001

H671 ● 1 2.00575-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. T2538H667 ● 1 5.3-5.2/2.6200-230/460-3Ø 1140 REV.5/8” x 6.00”O.O.S.E. T2540

OHS1004 * 1/8 1.00230 1550 CWLE1/2” x 2.00”OPEN174A * 1/6 1.00208-230 1625 REV.1/2” x 2-1/2”OPEN

30113057

OHS10206 ●* 1/5 1.30208-230 1075 CWLE1/2” x 3.00”OPEN 3008/3012OHS1016 * 1/5 1.60230 1075 CWLE1/2” x 3.00”OPEN 3009

OHS9983 ●* 1/2 2.70208-230 1725 CWLE1/2” x 3-1/2”OPENF062P ● 1/20 0.42600 1550 CWSE1/2” x 2-1/2”OPEN

R3051, 259983 206578, HHCFM DA2F062, DA2F091

SS34201 ●* 1/5 0.50575 1075 CCWSE1/2” x 3.30”OPEN 204201, R34201

HussmannStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

J055U H667 - H671F062P

OHS9983OHS1004 174A OHS1016

SS34201

OHS10206

SS370 - SS371 SS2657 - SS2658SS2269 FE1026 G004U


OEM Replacements


EM-1268 * 1/5 3.50115 1075/4 REV.1/2” x 3.50”OPENSS1314 * 1/3 6.00115 1075/4 CCWLE1/2” x 5-1/8”OPEN

P-8-9662DD-1314, F1314D

LX7930 * 3/4 2.30460 1075/3 CWSE1/2” x 2.50”OPEN 43G52019406A ●* 3/4 6.60208-230 1075/3 CCWLE6-1/2” x 5/8” x 5-1/4”OPEN 31C82019405A ●* 3/4 9.70115 1075/5 CCWLE1/2” x 3-1/8”OPEN 45H3301, 28F01

5BD1106 ●* 1 2.40575 1075/2 REV.1/2” x 5.00”OPENH671 ● 1 2.00575-3Ø 1140 REV.5/8” x 6.00”O.O.S.E.

F34575DD, 88C760198G6501

H953V1 ● 2 2.40575-3Ø 1800 REV.7/8” x 2.30”OPEN 32657/F21853

LennoxStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

H671LX7930 - 5BD1106

9405AEM-1268 SS1314

H953V1

9406A

UEH953 ● 2 2.70575-3Ø 1725 REV.7/8” x 2-1/4”OPEN 32657/F21853

UEH953

9627 1/25 1.30115 1550 CWSE5/16” x 1-3/4”T.E.9628 1/20 0.90200-230 1550 CWSE5/16” x 1-1/2”T.E.

11528, JAZP21611529, JA2P217 JA2S149

OKR1096 ● 1/2 2.0-1.9/0.95208-230/460-3Ø 1140 REV.5/8” x 2.00”T.E.A.O.OKR1503 ● 1 4.4-4.0/2.00200-230/460-3Ø 850 REV.5/8” x 3-1/4”O.O.S.E.

150372, 11096151437, 11503

9633, E2064479634, E206448

KrackStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

9627 - 9628

EM-9662 ●* OPEN 0.85115 1550 REV.5/16” x 3.00”1/20EM-9656 ●* OPEN 0.48208-230 1550 REV.5/16” x 3.00”1/15

EM-9662 - EM-9656 OKR1503OKR1096

276 50W 0.85230 1500 CCWLE5/16” x 2-1/2”OPEN981 1/15 0.60460 1550 CCWLE5/16” x 2-1/2”OPEN

810M050A62, TFM502810G037A47, 810G050A49

9487 1/12 1.30230 1500 CWLE5/16” x 2-1/8”OPEN TFM262

OTC6001 1/15 1.30230 1550 CCWLE5/16” x 2-3/4”OPEN 810S050A99

OTC6004 1/20 1.10230 1550 CCWLE5/16” x 2-1/2”OPEN

OTC1862 ●* 1/4 1.90230 1625 CWLE1/2” x 2-3/4”OPEN

810S037B01, R2372

TFM1862OTC1864 ●* 1/4 0.95460 1625 CWLE1/2” x 2-3/4”OPEN TFM1864

EM-1779P * 1/15 0.62230 1625 CCWSE5/16” x 3.00”OPEN TFM502, 810E050A85 F48HXDEJ1779

TecumsehStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

276981 OTC6001 - OTC6004 9487 OTC1862 - OTC1864


OEM Replacements

EM-1775P * 1/20 0.50230 1500 CCWSE5/16” x 3.00”OPEN F48DEF1775, TFM372 810E037A84

EM-1779P - EM-1775P

SS368 1/20 1.80115 1550 CCWSE5/16” x 2-3/4”OPENSS369 1/20 0.90208-230 1550 CCWSE5/16” x 2-3/4”OPEN

RMT-0011RMT-0012

RMT0005 ● 34W 0.80230 1550 CCWSEHublessT.E. NU-34-45-4/1542RMT0004 ● 34W 1.60115 1550 CCWSEHublessT.E. NU-34-45-2/1543

RMT0062 ● 1.5 2.50575-3Ø 860 REV.5/8” x 2-1/2”O.O.S.E.MA1074 ● 2 3.10575-3Ø 1140 REV.5/8” x 3.00”T.E.

43846, 43424RMT-0064

Ref PlusStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

SS368 - SS369 RMT0062 MA1074RMT0004 - RMT0005EM-9662 - EM-9656


C663 3/4 4.80-4.20/2.10208-230/460 1100 CCWLE5/8” x 4.00”O.O.S.E.SS2531 1 4.20/2.10208-230/460 1140 REV.5/8” x 6.00”O.O.S.E.

B-0950R2531

SS2535 1 1.50575 1140 REV.5/8” x 3.20”O.O.S.E. R2535

LiebertStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

SS2531 - SS2535C663

(●) Ball Bearing (*) P.S.C. Design 32Universal Electric Motors

OEM Replacements

SS7738 ●* 1/2 1.50460 1075 REV.1/2” x 6.00”T.E.A.O.OYK1056V1 * 1/2 2.50208-230 1090 CWLE1/2” x 4.00”T.E.A.O.

YCM124SD, 024-24100-002024-24110-701, 713

EM-2553 * 1 3.30460 1100/3 REV.1/2” x 4.00”OPEN YEFM1460, 024-21671-000 024-21673-000

5BD1076 ●* 3/4 2.30575 1075/2 REV.1/2” x 5.00”OPEN F34575DD, 024-31946-003

H953V1 ● 2 2.40575-3Ø 1800 REV.7/8” x 2.30”OPEN

H955L ● 3 3.60575-3Ø 1800 REV.7/8” x 2.30”OPEN

F21853, 024-19623-007

F31853, 024-19623-009

YorkStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

H955LH953V1OYK1056V1

SS7738

UEH955 ● 3 3.40575-3Ø 1800 REV.7/8” x 2.30”OPEN F31853, 024-19623-009

UEH953 ● 2 2.70575-3Ø 1725 REV.7/8” x 2-1/4”OPEN F21853, 024-19623-007

UEH953 - UEH955

5FE1056S ●* 1/2 1.20575 1100 REV.1/2” x 6-1/2”T.E.A.O.5FE1054S ●* 1/2 1.40575 1625 REV.1/2” x 6-1/2”T.E.A.O.

D2752D2750

5BD1076 ●* 3/4 2.30575 1075/2 REV.1/2” x 5.00”OPEN F34575DD, 21A309661P015FE1076S ●* 3/4 1.90575 1075 REV.1/2” x 6-1/2”T.E.A.O. D2753, MOT-2607

5BD1106 ●* 1 2.40575 1075/2 REV.1/2” x 5.00”OPEN

H955L ● 3 3.60575-3Ø 1800 REV.7/8” x 2.30”OPEN

F1575DD, X70671181-017 X70671479-001

F31853, MOT-6769 MOT-9800F31853, MOT-6769 MOT-9800

TraneStock # HP Amps.Volts RPM RotationShaftEncl. Replaces

SS9193 ●* 1 2.20575 1075 REV.5/8” x 5-31/32”OPEN X70671655-01, MOT09193

5FE1056S - 5FE1054S - 5FE1076S H955L5BD1076 - 5BD1106 - EM-2553

UEH955 ● 3 3.40575-3Ø 1800 REV.7/8” x 2.30”OPEN

954 - 9608 955 UE955

UEH955

954 * 1/30 0.60115 1100/3 CWLE1/2” x 8-1/2”OPEN9608 * 1/20 0.60115 1100/3 REV.1/2” x 9-7/8”OPEN

MOT-1878, MOT-1875MOT-1875, X70500149-02

680A * 1/8 1.50115 775/3 CCWLE11-1/2” x 1/2” x 11-1/2”OPEN MOT-711

955 * 1/6 2.00115 1500/3 CWLE10-1/2” x 1/2” x 10-1/2”OPEN MOT-1979, MOT-482UE955 * 1/6 2.30115 1500/3 DBL10-1/2” x 1/2” x 10-1/2”OPEN MOT-1979, MOT-482

SS9193

680A


• Open Drip-Proof• Class ‘B’ Insulation• Reversible Rotation• 60 Hz.• Resilient Base• Thermally Protected• 1/2” to 5/8” Sleeve & Key Included• Self-Aligning Sleeve & Sealed Ball Bearings

Features:

Split Phase Belted Fan Motors

All OmniDrive Models

56Z Frame - Two Speed

EM-5793C ● 1/3 6.40115 1725/1140 REV.1/2” x 1.50”OPEN


EM-5795C ● 3/4 11.50115 1725/1140 REV.1/2” x 1.50”OPENEM-5794C ● 1/2 8.70115 1725/1140 REV.1/2” x 1.50”OPEN

“C” Dim.

48 Frame - Single SpeedStock # HP Amps.Volts RPM RotationShaftEncl. “C” Dim.

10.40”10.40”11.30”

EM-841CV ● 1/3 6.40115 1725 REV.1/2” x 1.60”OPENEM-840CV ● 1/4 4.80115 1725 REV.1/2” x 1.60”OPEN 9.40”

EM-1542C ● 1/2 7.80115 1725 REV.1/2” x 1.60”OPEN 9.90”9.90”

All Century Models

®



All US Motors Models

(●) Ball Bearing


SS933 1/4 4.80115 1725 REV.6.81” 1/2” x 1.50”OPENSS934 1/3 6.60115 1725 REV.6.81” 1/2” x 1.50”OPENSS935 1/2 8.30115 1725 REV.7.76” 1/2” x 1.50”OPENSS934B ● 1/3 6.60115 1725 REV. 6.81” 1/2” x 1.50”OPENSS935B ● 1/2 7.60115 1725 REV. 6.81” 1/2” x 1.50”OPENSS933D ● 1/4 4.60/2.20-2.10115/208-230 1725 REV.6.75” 1/2” x 1.88”OPENSS934D ● 1/3 6.60/3.40-3.10115/208-230 1725 REV.6.75” 1/2” x 1.88”OPENSS935D ● 1/2 7.60/3.70-3.80115/208-230 1725 REV.8.58” 1/2” x 1.88”OPENSS936D ●^ 3/4 11.60/5.90-5.80115/208-230 1725 REV.10.55” 5/8” x 1.88”OPENGF2024 1/4 5.40115 1725 REV.7.50” 1/2” x 1.50”OPENGF2034 1/3 6.80115 1725 REV.7.80” 1/2” x 1.50”OPENGF2054 1/2 8.00115 1725 REV.8.30” 1/2” x 1.50”OPENRB2024 ● 1/4 5.00115 1725 REV.7.80” 1/2” x 1.50”OPENRB2034 ● 1/3 6.00115 1725 REV.7.50” 1/2” x 1.50”OPENBF2054 ● 1/2 8.20/4.10115/208-230 1725 REV.8.30 1/2” x 1.50”OPEN

48 Frame - Single Speed

(^) 56 Frame


• Open Drip-Proof• Class ‘A’ and ‘B’ Insulation• Reversible Rotation• Resilient Base• 5/8” Diameter Shaft• 40°C Ambient• High Starting Torque• Sleeve and Ball Bearings

Features:

Capacitor Start Belt Drive Motors

Stock # HP Amps.Volts RPM Rotation“C” Dim.Encl.

C455 1/3 6.60 / 3.00 - 3.30115 / 208-230 1725 REV.11.10”O.D.P.C403 ● 1/3 6.60 / 3.00 - 3.30115 / 208-230 1725 REV.11.10”O.D.P.C607 1/2 9.00 / 4.00 - 4.50115 / 208-230 1725 REV.11.10”O.D.P.C412V1 ● 1/2 9.00 / 4.00 - 4.50115 / 208-230 1725 REV.11.10”O.D.P.C654 3/4 5.40 - 5.50 / 11.00115 / 208-230 1725 REV.11.10”O.D.P.

C455 N/A N/A N/A N/AN/AC403 180 C216 C216 D6082S1120C607 N/A N/A N/A N/AS1138

Cross Reference

56 Frame

C412V1 1790 C1153 B317 D6084S1146C654 N/A N/A N/A N/AS1168C426V1 1893 C1156 B319 D6086S1174C692 N/A N/A N/A N/AN/A

C426V1 ● 3/4 5.40 - 5.50 / 11.00115 / 208-230 1725 REV.11.10”O.D.P.C692 1 6.20 - 6.30 / 12.60115 / 208-230 1725 REV.11.40”O.D.P.C523V1 ● 1 6.20 - 6.30 / 12.60115 / 208-230 1725 REV.11.90”O.D.P.C621 ● 1-1/2 7.80 - 7.50 / 15.00115 / 208-230 1725 REV.12.70”O.D.P.D13CA2JH9 ● 1/3 8.80 / 3.90 - 4.40115 / 208-230 1725 REV.9.80”O.D.P.EM-1790 ● 1/3 7.40 / 3.70115 / 208-230 1725 REV.9.30”O.D.P.EM-1893 ● 3/4 11.40 / 5.70115 / 208-230 1725 REV.10.80”O.D.P.EM-3187C ● 1 14.00 / 7.00115 / 230 1725 REV.11.80”O.D.P.EM-4242 ● 1-1/2 22.40 / 11.20115 / 208-230 1725 REV.12.80”O.D.P.

C523V1 3187C C1158 C1159 D6088S1199C621 4242 C1160 C1160 D6090S1336

Emerson GE Marathon FascoRotom

All Century Models



All US Motors Models

(●) Ball Bearing


• Resilient Base and Rigid Base• Reversible Rotation• 5/8” Diameter Shaft• Open Drip-Proof• 40°C Ambient• Ball Bearings

Features:

Three Phase Belt Drive Motors

Stock # HP Amps.VoltsRPM Shaft Dia.Frame Base

ResilientResilientResilientResilientResilientResilientResilientResilient

ResilientResilientResilientResilient

ResilientResilient

ResilientResilient

Resilient

1/2 1800 460/200-230 1.00/1.9-2.0

1.50/2.8-3.0

1.80/3.5-3.6

1.90/3.5-3.8

2.00/3.7-4.0

2.00/3.7-4.0

2.00

2.00

2.40

5.40

3.60

3.40

2.70

2.30/4.7-4.6

2.80/5.0-5.6

2.80/5.0-5.62.80/5.0-5.6

2.90/6.0-5.8

3.00/6.6-7.07.60-7.8/3.9

4.30/9.0-8.6

4.40/9.0-8.8

6.60/13.4-13.2

9.00-9.0/4.5

4.60/9.0-9.2

15.00/7.40

0.70

0.90

1.50

1.50

1.80

460/200-230

460/200-230

460/200-230

460/200-230460/200-230460/200-230

460/200-230

460/200-230460/200-230

460/200-230

460/200-230460/200-230

460/200-230

460/200-230460/200-230

460/200-230

575

575

575

575

575

575

575

575

575

575208-230/460

208-230/460

575

575

180018001800

1800180018001800

18001800

180018001800

180018001800

180018001800

1800

1800

36003600

36003600

3600

36003600

36003600

3600

1/2

11

11111-1/21-1/21-1/21-1/2

1-1/21-1/21-1/222222333333555

3/43/4

H840 5/8”56565656

56

56H56H56H56H56H

56H56H56H

56H

56H56H

56HZ

56HZ56HZ

56HZ56HZ56HZ56HZ56HZ

56HZ56HZ56HZ56HZ56HZ

56Y

56Y

5/8”5/8”5/8”5/8”5/8”5/8”5/8”5/8”7/8”

7/8”

7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”7/8”

7/8”

5/8”5/8”5/8”5/8”

5/8”5/8”

5/8”

H940V1H851V2H941LH842V1H950H852LH942H882H883H843V1H944H853V2H943V1

H884LH885LH951V1H844H952H854

H845

H855L

H954

H847H956H979L *

H980L *

UEH886UEH953

UEH887UEH955

56 Frame

RigidRigid

RigidRigidRigid

RigidRigid

RigidRigidRigidRigidRigidRigidRigid


( ) Carrier OEM Replacement

2.0057518001-1/2 56HZ 7/8”UEH951 Rigid

*

®


NEMA PREMIUM Drip-Proof Commercial & Industrial Motors

Stock # HP Volts Amps. Efficiency %RPM Frame

D15P2D 15 208-230 / 460 40.00 - 37.00 / 18.30 1800 93.0D20P2D 20 208-230 / 460 54.00 - 49.00 / 24.40 1800 93.0

D2P2D 2 208-230 / 460 5.90 / 2.80 1800 86.5

D1P2D 1 208-230 / 460 3.20 / 1.50 1800 85.5D32P2D 1-1/2 208-230 / 460 4.40 / 2.10 1800 86.5

D5P2D 5 208-230 / 460 13.80 - 13.00 / 6.50 1800 89.5

D10P2D 10 208-230 / 460 26.30 - 23.80 / 11.90 1800 91.7

D3P2D 3 208-230 / 460 8.40 - 7.80 / 3.90 1800 89.5

254T256T

145T

143T145T

184T

215T

182T

D7P2D 7-1/2 208-230 / 460 20.20 - 18.50 / 9.30 1800 91.0213T

D25P2D 25 208-230 / 460 64.00 - 58.00 / 29.00 1800 93.6284T

• Open Drip-Proof• Rigid Base• Class ‘F’ Insulation - Class ‘B’ Rise at Service Factor• Reversible Rotation• 1.15 Sevice Factor• F-1 Assembly• Aluminum End-Shields with Steel Inserts• Light Weight Rolled Steel Frame• Suitable for use with Inverters (VFD)• Double Shielded Bearings (140 - 280 Frame)• Lifting Provisions (210 Frame & Up)• Regreasable Bearings (180 Frame & Up) • Ball Bearings

Features:

Three Phase

D10P2G 10 575 9.80 1800 91.7D15P2G 15 575 14.80 1800 93.0

D32P2G 1-1/2 575 1.70 1800 86.5

D30P2D 30 208-230 / 460 77.00 - 69.00 / 34.00 1800 94.1D1P2G 1 575 1.30 1800 85.5

D3P2G 3 575 3.20 1800 89.5

D7P2G 7-1/2 575 7.20 1800 91.0

D2P2G 2 575 2.20 1800 86.5

215T254T

145T

286T143T

182T

213T

145T

D5P2G 5 575 5.20 1800 89.5184T

D20P2G 20 575 19.20 1800 93.0256TD25P2G 25 575 23.00 1800 94.1D30P2G 30 575 27.70 1800 94.1

284T286T


42/36 Month Warranty *

(*) Note: Warranty Period is 42 Months from Date of Manufacture or 36 Months from Date of Installation on Sine Wave Power or 30 Months from Date of Manufacture or 24 Months from Date of Installation on VFD Power, whichever occurs �rst.


Aluminum FrameThree Phase Motors

• Aluminum Construction• Totally Enclosed Fan Cooled• Continuous Duty• Class ‘B’ Insulation• Removable Bolt-on Feet• Reversible• 40°C Ambient• UL Listed & CSA Approved• 3 Positions for Feet Allow for F-1, F-2, F-0 Conduit Box Location• Inverter Duty 10:1 V.T. / 2:1 C.T.• Ball Bearings• 1.15 S.F.

Features:

®

56 & 56HZ Frame

Stock # HP Amps. “C” FrameShaft (Dia.)Volts

WA631 1/3 12.67”1.26 - 1.14 / 0.57208-230 / 460 5/8” 56 WA611 1/3 12.67”0.46575 5/8” 56

WA632 1/2 12.67”1.82 - 1.64 / 0.82208-230 / 460 5/8” 56WA612 1/2 12.67”0.66575 5/8” 56

WA633 3/4 12.67”2.59 - 2.34 / 1.17208-230 / 460 5/8” 56WA613 3/4 12.67”

WA614 1 13.66”

TA604 1 14.02”

WA634 1 13.66”

TA624 1 14.02”

0.94

1.17

1.17

3.24 - 2.92 / 1.46

3.24 - 2.92 / 1.46

575

575

575

208-230 / 460

208-230 / 460

5/8”

5/8”

7/8”

5/8”

7/8”

56

56H

56HZ

56H

56HZ

WA683 3/4 12.67”WA663 3/4 12.67”

2.94 - 2.66 / 1.331.06

208-230 / 460575

5/8”5/8”

5656

WA661 1/3 12.67”WA681 1/3 12.67”

0.521.43 - 1.30 / 0.65

575208-230 / 460

5/8”5/8”

5656

WA662 1/2 12.67”WA682 1/2 12.67”

0.772.12 - 1.92 / 0.96

575208-230 / 460

5/8”5/8”

5656

WA664 1 13.66”1.39575WA684 1 13.66”3.84 - 3.48 / 1.74208-230 / 460

5/8”5/8”

56H56H

TA654 1 14.02”1.39575TA674 1 14.02”3.84 - 3.48 / 1.74208-230 / 460

7/8”7/8”

56HZ56HZ

®


Features:



TA655 1-1/2 1.91575TA675 1-1/2 5.28 - 4.78 / 2.39208-230/460

7/8”7/8”

56HZ56HZ

14.02”14.02”

WA666 2

TA656 2

WA686 22.43

2.43

6.73 - 6.08 / 3.04575

575

208-230/460

TA676 2 6.73 - 6.08 / 3.04208-230/460

5/8”

7/8”

5/8”

7/8”

56H

56HZ

56H

56HZ

13.66”

14.02”

13.66”

14.02”

TA605 1-1/2TA625 1-1/2

1.704.71 - 4.26 / 2.13

575208-230/460

7/8”7/8”

56HZ56HZ

14.02”14.02”

WA616 2WA636 2

2.186.02 - 5.44 / 2.72

575208-230/460

5/8”5/8”

56H56H

13.66”13.66”

TA606 2 2.18575TA626 2 6.02 - 5.44 / 2.72208-230/460

7/8”7/8”

56HZ56HZ

14.02”14.02”

WA617 3

WA637 33.17

8.76 - 7.92 / 3.96

575208-230/460

5/8”5/8”

56H56H

13.66”13.66”

TA607 3 3.17575TA627 3 8.70 - 7.96 / 3.96208-230/460

7/8”7/8”

56HZ56HZ

14.02”14.02”

WA615 1-1/2WA635 1-1/2

1.704.71 - 4.26 / 2.13

575208-230/460 5/8”

5/8”56H56H13.66”

13.66”

WA665 1-1/2 1.91575WA685 1-1/2 5.28 - 4.78 / 2.39208-230/460

5/8”5/8”

56H56H

13.66”13.66”

56 & 56HZ Frame


®


Features:



56C & 56HCZ Frame


WA631C 1/3 12.67”1.26 - 1.14 / 0.57208-230 / 460 5/8” 56C WA611C 1/3 12.67”0.46575 5/8” 56C

WA632C 1/2 12.67”1.82 - 1.64 / 0.82208-230 / 460 5/8” 56CWA612C 1/2 12.67”0.66575 5/8” 56C

WA633C 3/4 12.67”2.59 - 2.34 / 1.17208-230 / 460 5/8” 56CWA613C 3/4 12.67”

WA614C 1 13.66”

TA604C 1 14.02”

WA634C 1 13.66”

TA624C 1 14.02”

0.94

1.17

1.17

3.24 - 2.92 / 1.46

3.24 - 2.92 / 1.46

575

575

575

208-230 / 460

208-230 / 460

5/8”

5/8”

7/8”

5/8”

7/8”

56C

56HC

56HCZ

56HC

56HCZ

WA661C 1/3 12.67”WA681C 1/3 12.67”

0.521.43 - 1.30 / 0.65

575208-230 / 460

5/8”5/8”

56C56C

WA662C 1/2 12.67”WA682C 1/2 12.67”

0.772.12 - 1.92 / 0.96

575208-230 / 460

5/8”5/8”

56C56C

WA683C 3/4 12.67”WA663C 3/4 12.67”

2.94 - 2.66 / 1.331.06

208-230 / 460575

5/8”5/8”

56C56C

WA664C 1 13.66”1.39575WA684C 1 13.66”3.84 - 3.48 / 1.74208-230 / 460

5/8”5/8”

56HC56HC

TA654C 1 14.02”1.39575TA674C 1 14.02”3.84 - 3.48 / 1.74208-230 / 460

7/8”7/8”

56HCZ56HCZ

®


Features:



56C & 56HCZ Frame

WA665C 1-1/2 1.91575WA685C 1-1/2 5.28 - 4.78 / 2.39208-230/460

5/8”5/8”

56HC56HC

13.66”13.66”

TA655C 1-1/2 1.91575TA675C 1-1/2 5.28 - 4.78 / 2.39208-230/460

7/8”7/8”

56HCZ56HCZ

14.02”14.02”

WA666C 2

TA656C 2

WA686C 22.43

2.43

6.73 - 6.08 / 3.04575

575

208-230/460

TA676C 2 6.73 - 6.08 / 3.04208-230/460

5/8”

7/8”

5/8”

7/8”

56HC

56HCZ

56HC

56HCZ

13.66”

14.02”

13.66”

14.02”

WA615C 1-1/2WA635C 1-1/2

1.704.71 - 4.26 / 2.13

575208-230/460 5/8”

5/8”56HC56HC13.66”

13.66”

TA605C 1-1/2TA625C 1-1/2

1.704.71 - 4.26 / 2.13

575208-230/460

7/8”7/8”

56HCZ56HCZ

14.02”14.02”

WA616C 2WA636C 2

2.186.02 - 5.44 / 2.72

575208-230/460

5/8”5/8”

56HC56HC

13.66”13.66”

TA606C 2 2.18575TA626C 2 6.02 - 5.44 / 2.72208-230/460

7/8”7/8”

56HCZ56HCZ

14.02”14.02”

WA617C 3

WA637C 33.17

8.76 - 7.92 / 3.96

575208-230/460

5/8”5/8”

56HC56HC

13.66”13.66”

TA607C 3 3.17575TA627C 3 8.70 - 7.96 / 3.96208-230/460

7/8”7/8”

56HCZ56HCZ

14.02”14.02”


41 Universal Electric Motors(●) Ball Bearing

NEMA PREMIUM TEFC Motors

Stock # HP Volts Amps. Efficiency %RPM C Face KitFrame

• Totally Enclosed Construction• Cast Iron Construction• Three Year Warranty• Dual Mounting Holes• Cast Iron Gasketed Conduit Box• Double Lip Seal on Both Ends• Class ‘F’ Insulation - Class ‘B’ Temp. Rise• NEMA MG 1, EEMAC M1-6, CSA C390• Double Sealed ‘ZZ’ Bearings up to (215T Frame)• Standard (Non-Metric) Hardware• F-2 Field Convertible• Conduit Box can be Rotated 90 Degrees• Ground Lug in Conduit Box• Rust Preventative Treated Steel Fan Cover• VPI Insulation System• ‘C’ Face Kits Available• 20:1 V.T. / 10:1 C.T.• Inverter Duty• Regreasable Bearings (254T Frame & Up)• Oversized Ball Bearings

Features:

Three Phase

All Models

TCP657 ●TCP658 ●TCP659 ●TCP65A ●TCP65B ●

87.587.589.589.591.0

CFP18CFP18CFP21CFP21CFP25

TCP65C ●TCP65D ●TCP65E ●TCP65F ●

91.092.492.493.0

CFP25CFP28CFP28CFP32

TCP65H ●TCP65I ●TCP65J ●TCP65K ●

95.095.495.495.4

CFP36CFP36CFP40CFP44

TCP65L ● TCP65M ●

TCP65G ●

95.896.2

93.0

CFP44CFP44

CFP32

182T184T213T215T254T256T284T

286T324T

364T365T405T444T445T447T

326T

357.5101520253040

6075100125150200

50

3.105.207.5010.0014.9019.6023.6028.3037.00

53.6066.6090.00109.00130.00172.00

46.30

575575575575575575575575575

575575575575575575

575

180018001800180018001800180018001800

180018001800180018001800

1800


Hot Water Circulator Pump Motors

Stock # HP Volts Amps. RotationType ReplacesBearing

SS1459 1/2 115-208/230 5.7/3.0-2.9 2C REVSS1462 3/4 115-208/230 8.2/4.7-4.2 2C REV

SS1352 1/6 115 3.8 2B CWSE

SS1350 1/12 115 2.5 2A CWSE

R1459R1462

R1352

R1350SS1355 1/6 115 3.8 2A CWSE ----

SS1444 1/4 115 4.6 2C CCWSE

SS1446 1/3 115 6.0 2C CCWSE

R1444

R1446

SS1354 1/4 115 4.6 2B CWSE R1354

BallBall

Ball

BallBall

Ball

Ball

Ball

SS1356 1/3 115 6.0 2B CWSE R1356Ball

C245 ^ 1 230/115 6.5/13.0 4 REV R1463Ball

Type 2A & 2B Type 2C Type 2C

• Open Drip-Proof• Single Phase & Three Phase• Mounting Bracket• 1800 RPM• Permanently Sealed Ball Bearings• Replacements for OEM Motors such as Armstrong (A), Bell & Gossett (B) & Taco (T)

Features:

Stock # HP Volts Amps. RotationType ReplacesBearing

Three Phase

Single Phase

H1048L 1 575 1.4 3 REV.H984 1 208-230/460 3.4-3.4/1.7 4 REV.

H1042L 3/4 208-230/460 2.7-2.8/1.4 3 REV.

H1041L 1/2 208-230/460 1.8-2.0/1.0 3 REV.

R1373(A)

R1370

R1368H1046 1/2 575 0.9 3 REV. R1369

H982 3/4 208-230/460 2.5-2.6/1.3 4 REV.

H1043L 1 208-230/460 3.4-3.4/1.7 3 REV.

(T)

R1371

H1047 3/4 575 1.1 3 REV. R1372

BallSleeve

Ball

BallBall

Sleeve

Ball

Ball

H983 3/4 208-230/460 2.5-2.6/1.3 4 REV. (A,B)Sleeve

H985L 1 208-230/460 3.4-3.4/1.7 4 REV. (B)Sleeve

H1044 1.5 208-230/460 5.7-5.6/2.8 3 REV.

H946L 1 208-230/460 3.7-3.6/1.8 4 REV.

R1374

(T)H947L 1 575 1.4 4 REV. (T)

H986 1.5 208-230/460 4.8-5.0/2.5 4 REV.

H988 3 208-230/460 4.4/9.0-8.8 4 REV.

(A, B)

(T)

H1049V1 1.5 575 2.1 3 REV. R1375 Ball

SleeveSleeve

Sleeve

Ball

Ball

H987 2 208-230/460 6.3-6.4/3.2 4 REV. (T)Ball

Type 3 Type 4

(^) Round Body - No Bracket

Type ‘2A’ 4.67” B.C.D. fits # 2 Bearing Assembly Type ‘2B’ 5.00” B.C.D. fits # 3 & 4 Bearing Assembly Type ‘2C’ 5.875” B.C.D. fits # 5, 6 & 7 Bearing Assembly


®


Invertek Drives

OPTIDRIVE E2 - Single PhaseDigital control for Single Phase motors - AC Variable Speed Drive 0.5-1.5 HP (115V & 240V Ratings)

OPTIDRIVE E2 - Single Phase IP66/NEMA 4X EnclosureDigital control for Single Phase motors - AC Variable Speed Drive 0.5-1.5 HP (115V & 240V Ratings)

The Optidrive E2 Single Phase is the world’s first fully digital, fully packaged variable speed drive for controlling low power single phase motors. Designed to be cost effective and easy to use, the OptidriveE2 Single Phase is for use with PSC (Permanent Split Capacitor) or Shaded-Pole Single-Phase inductionmotors. Optidrive E2 Single Phase uses a revolutionary motor control strategy to achieve reliable intelligent starting of single phase motors. Optidrive E2 Single Phase has only 14 standard parameters toadjust in its basic form. The Optidrive's legendary ease of use ensures quick and easy drive commissioning. For the more advanced user the extended parameter set gives access to powerful additional functionality.

Typically used for direct-drive fans and blowers with PSC (permanent-split capacitor) and shaded pole motors on single-phase power. These are typically applications with a starting torque of between 50-100% of motor full load rated torque.

All the same features & performance as above plus:

● Local potentiometer for speed control● Drive FWD/OFF/REV switch - Programmable for Hand / Auto (Local / Remote) applications● Built-In Disconnect - Provides the ability to isolate the motor for maintenance and servicing.

OPTIDRIVE E2 - Three Phase IP20 EnclosureEase of Use - AC Variable Speed Drive 0.5-15 HP (115V, 240V & 480V Ratings)

Rich in features the Optidrive E2 is the most commercially competitive Optidrive in the Optidrive family.Innovative and compact the Optidrive E2 range combines good looks with robustness, reliability and easy to use performance.The product is dedicated to low power applications where total costs are ultra-competitive, including: Competitive purchase price, Low installation costs, Low commissioning costs & Low technical support costs. Optidrive E2 has only 14 standard parameters to adjust in its basic form, thus Optidrive's legendary ease of use could not be easier or quicker to get started with.

Ideal for washdown applications - AC Variable Speed Drive 0.5-10 HP (115V, 240V & 480V Ratings)

Expanding on the success of the Optidrive E2, IP20 and IP55/NEMA 12 products, theOptidrive E2 IP66/NEMA 4X is ideal for food and beverage as well as pharmaceutical applications. The IP66 / NEMA 4X enclosure is a cost-effective, washdown duty Optidrive for low power situations. Ready for high-pressure washdown, the IP66 / NEMA 4X can mount directly on your processing equipment.

OPTIDRIVE E2 - Three Phase IP66/NEMA 4X Enclosure


Invertek Drives

OPTIDRIVE HVAC - Three Phase IP20 EnclosureAC Variable Speed Drive 1-350 HP (240V, 480V & 600V Ratings)

Optidrive HVAC sets a new standard for dedicated fan & pump control.

Whilst retaining the ease of use traditionally associated with Invertek Drives, Optidrive HVAC has an innovative design, combined with robust performance to provide powerful flow control and reliability in a compact drive. Example savings based on a 45kW load using Optidrive HVAC compared to direct on-line control, an estimated 20% reduction in speed results in potential energy savings of 50%.

The Optidrive HVAC provides powerful and flexible control that is ideal for applications such as centrifugal pumps and fan units, where large and immediate energy savings can almost always be found.

OPTIDRIVE HVAC - Three Phase IP55 & IP66 EnclosureAC Variable Speed Drive 1-350 HP (240V, 480V & 600V Ratings)

All the same features & performance as the OPTIDRIVE HVAC IP20.

OPTIDRIVE P2 - Three Phase IP20 EnclosureAC Variable Speed Drive 1-350 HP (240V, 480V & 600V Ratings)

The all new Optidrive P2 provides world leading control for both standard inductionmotors and permanent magnet motors.

Open loop vector control of standard induction motors provides up to 200% torque from zero speed. Open and closed loop control of the latest generation of high efficiency PM motors. Closed loop encoder feedback capability for standard induction motors. Extensive I/O and communications interface capabilities ensure the drive can be integrated quickly and efficiently into a wide variety of control systems.A simple parameter structure and carefully selected factory settings ensure fast and easy commissioning..

OPTIDRIVE P2 - Three Phase IP55 & IP66 EnclosureAC Variable Speed Drive 1-350 HP (240V, 480V & 600V Ratings)

All the same features & performance as the OPTIDRIVE P2 IP20 Enclosure.

●IP55/NEMA 12 ‘Un-Switched’

●IP66/NEMA 4X ‘Switched’ includes:- Local potentiometer for speed control- Drive FWD/OFF/REV switch - Programmable for Hand / Auto (Local / Remote) applications- Built-In Disconnect - Provides the ability to isolate the motor for maintenance and servicing.

AT YOUR SERVICE

MORE MOTOR KNOWLEDGE... MORE MOTOR EXPERIENCE...MORE MOTOR VARIETY...

WE ALSO OFFER:

UNIT BEARING MOTORS

ECM REFRIGERATION MOTORS MORE BLOWERS

MORE SKELETON MOTORS

MORE 3.3” DIAMETER MOTORS

PUMP MOTORS

GENERAL PURPOSE MOTORS (IHP)

ELEVATOR DUTY MOTORS

FARM DUTY MOTORS

MORE OEM REPLACEMENT MOTORS

COMPRESSOR DUTY MOTORS MORE 4” DIAMETER MOTORS

MORE 5” DIAMETER MOTORS

MORE 48 FRAME MOTORS

MORE 56 FRAME MOTORS

PM & SHUNT WOUND DC MOTORS

INTEGRITY OF CATALOG: The information contained in this catalogue is for reference purposes only. We strive to ensure that the information is as accurate and current as possible. We are in no way responsible for any errors that may arise. We reserve the right to change specifications and other information included without prior notice. If you are concerned about the validity of the information on a certain product, please visit www.uem.ca and contact us.

DISCLAIMER: All content offered from or available in our catalogue are provided to you on an “as is” basis, without representations, warranties or conditions of any kind. You acknowledge and agree that any reliance by you on any information available in this catalogue shall be at your own risk.reliance by you on any information available in this catalogue shall be at your own risk.

All rights reserved. You may not produce, copy, modify or redistribute the design or layout of any Universal Electric Motors content without written permission.

It is important to note that Universal Electric Motors is not affiliated with any of the original equipment manufacturers or their brands which may be referred to herein. Other trade-marks featured in this catalogue are the property of their respective owners. No association between Universal Electric Motors and any trademark holder is expressed or implied. The names, descriptions, numbers and symbols featured throughout this catalogue are for cross reference purposes onlthroughout this catalogue are for cross reference purposes only.

© Universal Electric Motors. All Rights Reserved.

WWW.UEM.CA

1(: 7+,6 6($621 - universal electric motors · 2015. 4. 20. · unit bearing motors unit bearings...

Documents